RFC1381-MIB
59 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter |
| RFC1213-MIB | transmission |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.16 | Nodelapb | |||
| 1.3.6.1.2.1.10.16.1 | TablelapbAdmnTable | not-accessible | mandatory | This table contains objects that can be changed to manage a LAPB interface. Changing one of these parameters may take effect in the operating LAPB immediately … |
| 1.3.6.1.2.1.10.16.1.1 | RowlapbAdmnEntry | not-accessible | mandatory | Configured parameter values for a specific LAPB. |
| 1.3.6.1.2.1.10.16.1.1.1 | ColumnlapbAdmnIndex | read-only | mandatory | The ifIndex value for the LAPB interface. |
| 1.3.6.1.2.1.10.16.1.1.2 | ColumnlapbAdmnStationType | read-write | mandatory | Identifies the desired station type of this interface. |
| 1.3.6.1.2.1.10.16.1.1.3 | ColumnlapbAdmnControlField | read-write | mandatory | The desired size of the sequence numbers used to number frames. |
| 1.3.6.1.2.1.10.16.1.1.4 | ColumnlapbAdmnTransmitN1FrameSize | read-write | mandatory | The default maximum N1 frame size desired in number of bits for a frame transmitted by this DTE. This excludes flags and 0 bits inserted for transparency. |
| 1.3.6.1.2.1.10.16.1.1.5 | ColumnlapbAdmnReceiveN1FrameSize | read-write | mandatory | The default maximum N1 frame size desired in number of bits for a frame the DCE/remote DTE transmits to this DTE. This excludes flags and 0 bits inserted for t… |
| 1.3.6.1.2.1.10.16.1.1.6 | ColumnlapbAdmnTransmitKWindowSize | read-write | mandatory | The default transmit window size for this Interface. This is the maximum number of unacknowledged sequenced PDUs that may be outstanding from this DTE at any o… |
| 1.3.6.1.2.1.10.16.1.1.7 | ColumnlapbAdmnReceiveKWindowSize | read-write | mandatory | The default receive window size for this Interface. This is the maximum number of unacknowledged sequenced PDUs that may be outstanding from the DCE/remote DTE… |
| 1.3.6.1.2.1.10.16.1.1.8 | ColumnlapbAdmnN2RxmitCount | read-write | mandatory | The default N2 retry counter for this interface. This specifies the number of times a PDU will be resent after the T1 timer expires without an acknowledgement … |
| 1.3.6.1.2.1.10.16.1.1.9 | ColumnlapbAdmnT1AckTimer | read-write | mandatory | The default T1 timer for this interface. This specifies the maximum time in Milliseconds to wait for acknowledgment of a PDU. |
| 1.3.6.1.2.1.10.16.1.1.10 | ColumnlapbAdmnT2AckDelayTimer | read-write | mandatory | The default T2 timer for this interface. This specifies the maximum time in Milliseconds to wait before sending an acknowledgment for a sequenced PDU. A value … |
| 1.3.6.1.2.1.10.16.1.1.11 | ColumnlapbAdmnT3DisconnectTimer | read-write | mandatory | The T3 timer for this interface. This specifies the time in Milliseconds to wait before considering the link disconnected. A value of zero indicates the link w… |
| 1.3.6.1.2.1.10.16.1.1.12 | ColumnlapbAdmnT4IdleTimer | read-write | mandatory | The T4 timer for this interface. This specifies the maximum time in Milliseconds to allow without frames being exchanged on the data link. A value of 214748364… |
| 1.3.6.1.2.1.10.16.1.1.13 | ColumnlapbAdmnActionInitiate | read-write | mandatory | This identifies the action LAPB will take to initiate link set-up. |
| 1.3.6.1.2.1.10.16.1.1.14 | ColumnlapbAdmnActionRecvDM | read-write | mandatory | This identifies the action LAPB will take when it receives a DM response. |
| 1.3.6.1.2.1.10.16.2 | TablelapbOperTable | not-accessible | mandatory | This table contains configuration information about interface parameters currently set in the interface. Many of these objects have corresponding objects in th… |
| 1.3.6.1.2.1.10.16.2.1 | RowlapbOperEntry | not-accessible | mandatory | Currently set parameter values for a specific LAPB. |
| 1.3.6.1.2.1.10.16.2.1.1 | ColumnlapbOperIndex | read-only | mandatory | The ifIndex value for the LAPB interface. |
| 1.3.6.1.2.1.10.16.2.1.2 | ColumnlapbOperStationType | read-only | mandatory | Identifies the current operating station type of this interface. A value of dxe (3) indicates XID negotiation has not yet taken place. |
| 1.3.6.1.2.1.10.16.2.1.3 | ColumnlapbOperControlField | read-only | mandatory | The current operating size of the sequence numbers used to number frames. |
| 1.3.6.1.2.1.10.16.2.1.4 | ColumnlapbOperTransmitN1FrameSize | read-only | mandatory | The current operating N1 frame size used for the maximum number of bits in a frame this DTE can transmit. This excludes flags and 0 bits inserted for transpare… |
| 1.3.6.1.2.1.10.16.2.1.5 | ColumnlapbOperReceiveN1FrameSize | read-only | mandatory | The current operating N1 frame size used for the maximum number of bits in a frame the DCE/remote DTE can transmit. This excludes flags and 0 bits inserted for… |
| 1.3.6.1.2.1.10.16.2.1.6 | ColumnlapbOperTransmitKWindowSize | read-only | mandatory | The current PDU window size this Interface uses to transmit. This is the maximum number of unacknowledged sequenced PDUs that may be outstanding from this DTE … |
| 1.3.6.1.2.1.10.16.2.1.7 | ColumnlapbOperReceiveKWindowSize | read-only | mandatory | The current receive PDU window size for this Interface. This is the maximum number of unacknowledged sequenced PDUs that may be outstanding from the DCE/remote… |
| 1.3.6.1.2.1.10.16.2.1.8 | ColumnlapbOperN2RxmitCount | read-only | mandatory | The current N2 retry counter used for this interface. This specifies the number of times a PDU will be resent after the T1 timer expires without an acknowledge… |
| 1.3.6.1.2.1.10.16.2.1.9 | ColumnlapbOperT1AckTimer | read-only | mandatory | The current T1 timer for this interface. This specifies the maximum time in Milliseconds to wait for acknowledgment of a PDU. |
| 1.3.6.1.2.1.10.16.2.1.10 | ColumnlapbOperT2AckDelayTimer | read-only | mandatory | The current T2 timer for this interface. This specifies the maximum time in Milliseconds to wait before sending an acknowledgment for a sequenced PDU. A value … |
| 1.3.6.1.2.1.10.16.2.1.11 | ColumnlapbOperT3DisconnectTimer | read-only | mandatory | The current T3 timer for this interface. This specifies the time in Milliseconds to wait before considering the link disconnected. A value of zero indicates th… |
| 1.3.6.1.2.1.10.16.2.1.12 | ColumnlapbOperT4IdleTimer | read-write | mandatory | The current T4 timer for this interface. This specifies the maximum time in Milliseconds to allow without frames being exchanged on the data link. A value of 2… |
| 1.3.6.1.2.1.10.16.2.1.13 | ColumnlapbOperPortId | read-only | mandatory | This object identifies an instance of the index object in the first group of objects in the MIB specific to the physical device or interface used to send and r… |
| 1.3.6.1.2.1.10.16.2.1.14 | ColumnlapbOperProtocolVersionId | read-only | mandatory | This object identifies the version of the lapb protocol implemented by this interface. |
| 1.3.6.1.2.1.10.16.3 | TablelapbFlowTable | not-accessible | mandatory | This table defines the objects recorded by LAPB to provide information about the traffic flow through the interface. |
| 1.3.6.1.2.1.10.16.3.1 | RowlapbFlowEntry | not-accessible | mandatory | The information regarding the effects of flow controls in LAPB. |
| 1.3.6.1.2.1.10.16.3.1.1 | ColumnlapbFlowIfIndex | read-only | mandatory | The ifIndex value for the LAPB Interface. |
| 1.3.6.1.2.1.10.16.3.1.2 | ColumnlapbFlowStateChanges | read-only | mandatory | The number of LAPB State Changes, including resets. |
| 1.3.6.1.2.1.10.16.3.1.3 | ColumnlapbFlowChangeReason | read-only | mandatory | The reason for the most recent incrementing of lapbFlowStateChanges. A DM or DISC frame generated to initiate link set-up does not alter this object. When the … |
| 1.3.6.1.2.1.10.16.3.1.4 | ColumnlapbFlowCurrentMode | read-only | mandatory | The current condition of the conversation. |
| 1.3.6.1.2.1.10.16.3.1.5 | ColumnlapbFlowBusyDefers | read-only | mandatory | The number of times this device was unable to transmit a frame due to a perceived remote busy condition. Busy conditions can result from the receipt of an RNR … |
| 1.3.6.1.2.1.10.16.3.1.6 | ColumnlapbFlowRejOutPkts | read-only | mandatory | The number of REJ or SREJ frames sent by this station. |
| 1.3.6.1.2.1.10.16.3.1.7 | ColumnlapbFlowRejInPkts | read-only | mandatory | The number of REJ or SREJ frames received by this station. |
| 1.3.6.1.2.1.10.16.3.1.8 | ColumnlapbFlowT1Timeouts | read-only | mandatory | The number of times a re-transmission was effected by the T1 Timer expiring. |
| 1.3.6.1.2.1.10.16.3.1.9 | ColumnlapbFlowFrmrSent | read-only | mandatory | The Information Field of the FRMR most recently sent. If no FRMR has been sent (the normal case) or the information isn't available, this will be an OCTET STRI… |
| 1.3.6.1.2.1.10.16.3.1.10 | ColumnlapbFlowFrmrReceived | read-only | mandatory | The Information Field of the FRMR most recently received. If no FRMR has been received (the normal case) or the information isn't available, this will be an OC… |
| 1.3.6.1.2.1.10.16.3.1.11 | ColumnlapbFlowXidReceived | read-only | mandatory | The Information Field of the XID frame most recently received. If no XID frame has been received, this will be an OCTET STRING of zero length. |
| 1.3.6.1.2.1.10.16.4 | TablelapbXidTable | not-accessible | mandatory | This table defines values to use for XID negotiation that are not found in the lapbAdmnTable. This table is optional for implementations that don't support XID… |
| 1.3.6.1.2.1.10.16.4.1 | RowlapbXidEntry | not-accessible | mandatory | XId negotiation parameter values for a specific LAPB. |
| 1.3.6.1.2.1.10.16.4.1.1 | ColumnlapbXidIndex | read-only | mandatory | The ifIndex value for the LAPB interface. |
| 1.3.6.1.2.1.10.16.4.1.2 | ColumnlapbXidAdRIdentifier | read-write | mandatory | The value of the Address Resolution Identifier. A zero length string indicates no Identifier value has been assigned. |
| 1.3.6.1.2.1.10.16.4.1.3 | ColumnlapbXidAdRAddress | read-write | mandatory | The value of the Address Resolution Address. A zero length string indicates no Address value has been assigned. |
| 1.3.6.1.2.1.10.16.4.1.4 | ColumnlapbXidParameterUniqueIdentifier | read-write | mandatory | The value of the parameter unique Identifier. A zero length string indicates no Unique identifier value has been assigned. |
| 1.3.6.1.2.1.10.16.4.1.5 | ColumnlapbXidGroupAddress | read-write | mandatory | The value of the parameter Group address. A zero length string indicates no Group address value has been assigned. |
| 1.3.6.1.2.1.10.16.4.1.6 | ColumnlapbXidPortNumber | read-write | mandatory | The port number assigned for this link. A zero length string indicates no local port number identifier has been assigned. |
| 1.3.6.1.2.1.10.16.4.1.7 | ColumnlapbXidUserDataSubfield | read-write | mandatory | A user data subfield, if any, to be transmitted in an XID frame. A zero length frame indicates no user data subfield has been assigned. The octet string should… |
| 1.3.6.1.2.1.10.16.5 | NodelapbProtocolVersion | |||
| 1.3.6.1.2.1.10.16.5.1 | NodelapbProtocolIso7776v1986 | |||
| 1.3.6.1.2.1.10.16.5.2 | NodelapbProtocolCcittV1980 | |||
| 1.3.6.1.2.1.10.16.5.3 | NodelapbProtocolCcittV1984 |