RFC15850-MIB
119 objects
No module-level DESCRIPTION found.
Imported Objects
| BINTEC-MIB MISSING | HexValue |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress mib-2 NetworkAddress TimeTicks |
| RFC1158-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.14 | Nodeospf | |||
| 1.3.6.1.2.1.14.1 | NodeospfGeneralGroup | |||
| 1.3.6.1.2.1.14.1.1 | ScalarospfRouterId | read-only | mandatory | A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the … |
| 1.3.6.1.2.1.14.1.2 | ScalarospfAdminStat | read-write | mandatory | The administrative status of OSPF in the router. The value 'enabled' denotes that the OSPF Process is active on at least one interface; 'disabled' disables it … |
| 1.3.6.1.2.1.14.1.3 | ScalarospfVersionNumber | read-only | mandatory | The current version number of the OSPF protocol is 2. |
| 1.3.6.1.2.1.14.1.4 | ScalarospfAreaBdrRtrStatus | read-only | mandatory | A flag to note whether this router is an area border router. |
| 1.3.6.1.2.1.14.1.5 | ScalarospfAsBdrRtrStatus | read-only | mandatory | A flag to note whether this router is an Autonomous System border router. |
| 1.3.6.1.2.1.14.1.6 | ScalarospfExternLsaCount | read-only | mandatory | The number of external (LS type 5) link-state advertisements in the link-state database. |
| 1.3.6.1.2.1.14.1.7 | ScalarospfExternLsaCksumSum | read-only | mandatory | The 32-bit unsigned sum of the LS checksums of the external link-state advertisements contained in the link-state database. This sum can be used to determine i… |
| 1.3.6.1.2.1.14.1.8 | ScalarospfTOSSupport | read-only | mandatory | The router's support for type-of-service routing. |
| 1.3.6.1.2.1.14.1.9 | ScalarospfOriginateNewLsas | read-only | mandatory | The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA. |
| 1.3.6.1.2.1.14.1.10 | ScalarospfRxNewLsas | read-only | mandatory | The number of link-state advertisements received determined to be new instantiations. This number does not include newer instantiations of self-originated link… |
| 1.3.6.1.2.1.14.1.11 | ScalarospfExtLsdbLimit | read-write | mandatory | The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the… |
| 1.3.6.1.2.1.14.1.12 | ScalarospfMulticastExtensions | read-only | mandatory | A Bit Mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. … |
| 1.3.6.1.2.1.14.1.13 | ScalarospfExitOverflowInterval | read-write | mandatory | The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default A… |
| 1.3.6.1.2.1.14.1.14 | ScalarospfDemandExtensions | read-only | mandatory | The router's support for demand routing. |
| 1.3.6.1.2.1.14.2 | TableospfAreaTable | not-accessible | mandatory | Information describing the configured parameters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.2.1.14.2.1 | RowospfAreaEntry | not-accessible | mandatory | Information describing the configured parameters and cumulative statistics of one of the router's attached areas. |
| 1.3.6.1.2.1.14.2.1.1 | ColumnospfAreaId | read-write | mandatory | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.2.1.14.2.1.2 | ColumnospfAuthType | read-only | mandatory | The authentication type specified for an area. Additional authentication types may be assigned locally on a per Area basis. ** not used - see ospfIfAuthType ** |
| 1.3.6.1.2.1.14.2.1.3 | ColumnospfImportAsExtern | read-write | mandatory | The area's support for importing AS external link- state advertisements. |
| 1.3.6.1.2.1.14.2.1.4 | ColumnospfSpfRuns | read-only | mandatory | The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorith… |
| 1.3.6.1.2.1.14.2.1.5 | ColumnospfAreaBdrRtrCount | read-only | mandatory | The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.2.1.14.2.1.6 | ColumnospfAsBdrRtrCount | read-only | mandatory | The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| 1.3.6.1.2.1.14.2.1.7 | ColumnospfAreaLsaCount | read-only | mandatory | The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's. |
| 1.3.6.1.2.1.14.2.1.8 | ColumnospfAreaLsaCksumSum | read-only | mandatory | The 32-bit unsigned sum of the link-state advertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) lin… |
| 1.3.6.1.2.1.14.2.1.9 | ColumnospfAreaSummary | read-write | mandatory | The variable ospfAreaSummary controls the im- port of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will ne… |
| 1.3.6.1.2.1.14.2.1.10 | ColumnospfAreaStatus | read-write | mandatory | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.2.1.14.2.1.11 | ColumnospfAreaLSAOriginateDelay | read-write | mandatory | The variable ospfAreaLSAOriginateDelay controls the origination of LSA for RADIUS-DialUp connections. It has no effect on other areas. The unit of the value of… |
| 1.3.6.1.2.1.14.3 | TableospfStubAreaTable | not-accessible | mandatory | The set of metrics that will be advertised by a default Area Border Router into a stub area. |
| 1.3.6.1.2.1.14.3.1 | RowospfStubAreaEntry | not-accessible | mandatory | The metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area. |
| 1.3.6.1.2.1.14.3.1.1 | ColumnospfStubAreaId | read-write | mandatory | The 32 bit identifier for the Stub Area. On creation, this can be derived from the instance. |
| 1.3.6.1.2.1.14.3.1.2 | ColumnospfStubTOS | read-only | mandatory | The Type of Service associated with the metric. On creation, this can be derived from the instance. |
| 1.3.6.1.2.1.14.3.1.3 | ColumnospfStubMetric | read-write | mandatory | The metric value applied at the indicated type of service. By default, this equals the least metric at the type of service among the interfaces to other areas. |
| 1.3.6.1.2.1.14.3.1.4 | ColumnospfStubStatus | read-write | mandatory | This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row re… |
| 1.3.6.1.2.1.14.3.1.5 | ColumnospfStubMetricType | read-write | mandatory | This variable displays the type of metric ad- vertised as a default route. |
| 1.3.6.1.2.1.14.4 | TableospfLsdbTable | not-accessible | mandatory | The OSPF Process's Links State Database. |
| 1.3.6.1.2.1.14.4.1 | RowospfLsdbEntry | not-accessible | mandatory | A single Link State Advertisement. |
| 1.3.6.1.2.1.14.4.1.1 | ColumnospfLsdbAreaId | read-only | mandatory | The 32 bit identifier of the Area from which the LSA was received. |
| 1.3.6.1.2.1.14.4.1.2 | ColumnospfLsdbType | read-only | mandatory | The type of the link state advertisement. Each link state type has a separate advertisement format. |
| 1.3.6.1.2.1.14.4.1.3 | ColumnospfLsdbLsid | read-only | mandatory | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.2.1.14.4.1.4 | ColumnospfLsdbRouterId | read-only | mandatory | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.2.1.14.4.1.5 | ColumnospfLsdbSequence | read-only | mandatory | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linear… |
| 1.3.6.1.2.1.14.4.1.6 | ColumnospfLsdbAge | read-only | mandatory | This field is the age of the link state advertisement in seconds. |
| 1.3.6.1.2.1.14.4.1.7 | ColumnospfLsdbChecksum | read-only | mandatory | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.2.1.14.4.1.8 | ColumnospfLsdbAdvertisement | read-only | mandatory | The entire Link State Advertisement, including its header. |
| 1.3.6.1.2.1.14.7 | TableospfIfTable | not-accessible | mandatory | The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. |
| 1.3.6.1.2.1.14.7.1 | RowospfIfEntry | not-accessible | mandatory | The OSPF Interface Entry describes one interface from the viewpoint of OSPF. |
| 1.3.6.1.2.1.14.7.1.1 | ColumnospfIfIpAddress | read-only | mandatory | The IP address of this OSPF interface. |
| 1.3.6.1.2.1.14.7.1.2 | ColumnospfAddressLessIf | read-only | mandatory | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corr… |
| 1.3.6.1.2.1.14.7.1.3 | ColumnospfIfAreaId | read-write | mandatory | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.2.1.14.7.1.4 | ColumnospfIfType | read-only | mandatory | The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.… |
| 1.3.6.1.2.1.14.7.1.5 | ColumnospfIfAdminStat | read-only | mandatory | The OSPF interface's administrative status. The value 'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be a… |
| 1.3.6.1.2.1.14.7.1.6 | ColumnospfIfRtrPriority | read-write | mandatory | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the r… |
| 1.3.6.1.2.1.14.7.1.7 | ColumnospfIfTransitDelay | read-write | mandatory | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.2.1.14.7.1.8 | ColumnospfIfRetransInterval | read-write | mandatory | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmittin… |
| 1.3.6.1.2.1.14.7.1.9 | ColumnospfIfHelloInterval | read-write | mandatory | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a com… |
| 1.3.6.1.2.1.14.7.1.10 | ColumnospfIfRtrDeadInterval | read-write | mandatory | The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello… |
| 1.3.6.1.2.1.14.7.1.11 | ColumnospfIfPollInterval | read-write | mandatory | The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi- access neighbor. |
| 1.3.6.1.2.1.14.7.1.12 | ColumnospfIfState | read-only | mandatory | The OSPF Interface State. |
| 1.3.6.1.2.1.14.7.1.13 | ColumnospfIfDesignatedRouter | read-only | mandatory | The IP Address of the Designated Router. |
| 1.3.6.1.2.1.14.7.1.14 | ColumnospfIfBackupDesignatedRouter | read-only | mandatory | The IP Address of the Backup Designated Router. |
| 1.3.6.1.2.1.14.7.1.15 | ColumnospfIfEvents | read-only | mandatory | The number of times this OSPF interface has changed its state, or an error has occurred. |
| 1.3.6.1.2.1.14.7.1.16 | ColumnospfIfAuthKey | read-write | mandatory | The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fi… |
| 1.3.6.1.2.1.14.7.1.17 | ColumnospfIfStatus | read-only | mandatory | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.2.1.14.7.1.18 | ColumnospfIfMulticastForwarding | read-only | mandatory | The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multic… |
| 1.3.6.1.2.1.14.7.1.19 | ColumnospfIfDemand | read-write | mandatory | Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be per- formed on this … |
| 1.3.6.1.2.1.14.7.1.20 | ColumnospfIfAuthType | read-write | mandatory | The authentication type specified for an in- terface. Additional authentication types may be assigned locally. |
| 1.3.6.1.2.1.14.8 | TableospfIfMetricTable | not-accessible | mandatory | The TOS metrics for a non-virtual interface identified by the interface index. |
| 1.3.6.1.2.1.14.8.1 | RowospfIfMetricEntry | not-accessible | mandatory | A particular TOS metric for a non-virtual interface identified by the interface index. |
| 1.3.6.1.2.1.14.8.1.1 | ColumnospfIfMetricIpAddress | read-only | mandatory | The IP address of this OSPF interface. On row creation, this can be derived from the instance. |
| 1.3.6.1.2.1.14.8.1.2 | ColumnospfIfMetricAddressLessIf | read-only | mandatory | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the valu… |
| 1.3.6.1.2.1.14.8.1.3 | ColumnospfIfMetricTOS | read-only | mandatory | The type of service metric being referenced. On row creation, this can be derived from the instance. |
| 1.3.6.1.2.1.14.8.1.4 | ColumnospfIfMetricValue | read-write | mandatory | The metric of using this type of service on this interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. The value FFFF is distinguished to mean 'n… |
| 1.3.6.1.2.1.14.8.1.5 | ColumnospfIfMetricStatus | read-only | mandatory | This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row re… |
| 1.3.6.1.2.1.14.9 | TableospfVirtIfTable | not-accessible | mandatory | Information about this router's virtual inter- faces. |
| 1.3.6.1.2.1.14.9.1 | RowospfVirtIfEntry | not-accessible | mandatory | Information about a single Virtual Interface. |
| 1.3.6.1.2.1.14.9.1.1 | ColumnospfVirtIfAreaId | read-write | mandatory | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| 1.3.6.1.2.1.14.9.1.2 | ColumnospfVirtIfNeighbor | read-write | mandatory | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.2.1.14.9.1.3 | ColumnospfVirtIfTransitDelay | read-write | mandatory | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| 1.3.6.1.2.1.14.9.1.4 | ColumnospfVirtIfRetransInterval | read-write | mandatory | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitt… |
| 1.3.6.1.2.1.14.9.1.5 | ColumnospfVirtIfHelloInterval | read-write | mandatory | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. |
| 1.3.6.1.2.1.14.9.1.6 | ColumnospfVirtIfRtrDeadInterval | read-write | mandatory | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hel… |
| 1.3.6.1.2.1.14.9.1.7 | ColumnospfVirtIfState | read-only | mandatory | OSPF virtual interface states. |
| 1.3.6.1.2.1.14.9.1.8 | ColumnospfVirtIfEvents | read-only | mandatory | The number of state changes or error events on this Virtual Link |
| 1.3.6.1.2.1.14.9.1.9 | ColumnospfVirtIfAuthKey | read-write | mandatory | If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication … |
| 1.3.6.1.2.1.14.9.1.10 | ColumnospfVirtIfStatus | read-write | mandatory | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.2.1.14.9.1.11 | ColumnospfVirtIfAuthType | read-write | mandatory | The authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally. |
| 1.3.6.1.2.1.14.10 | TableospfNbrTable | not-accessible | mandatory | A table of non-virtual neighbor information. |
| 1.3.6.1.2.1.14.10.1 | RowospfNbrEntry | not-accessible | mandatory | The information regarding a single neighbor. |
| 1.3.6.1.2.1.14.10.1.1 | ColumnospfNbrIpAddr | read-only | mandatory | The IP address of this neighbor. |
| 1.3.6.1.2.1.14.10.1.2 | ColumnospfNbrAddressLessIndex | read-only | mandatory | On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. On row creation, this c… |
| 1.3.6.1.2.1.14.10.1.3 | ColumnospfNbrRtrId | read-only | mandatory | A 32-bit integer (represented as a type IpAddress) uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.2.1.14.10.1.4 | ColumnospfNbrOptions | read-only | mandatory | A Bit Mask corresponding to the neighbor's options field. Bit 0, if set, indicates that the area accepts and operates on external information; if zero, it is a… |
| 1.3.6.1.2.1.14.10.1.5 | ColumnospfNbrPriority | read-only | mandatory | The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated rou… |
| 1.3.6.1.2.1.14.10.1.6 | ColumnospfNbrState | read-only | mandatory | The State of the relationship with this Neighbor. |
| 1.3.6.1.2.1.14.10.1.7 | ColumnospfNbrEvents | read-only | mandatory | The number of times this neighbor relationship has changed state, or an error has occurred. |
| 1.3.6.1.2.1.14.10.1.8 | ColumnospfNbrLsRetransQLen | read-only | mandatory | The current length of the retransmission queue. |
| 1.3.6.1.2.1.14.10.1.9 | ColumnospfNbrStatus | read-only | mandatory | This variable displays the validity or invalidity of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row re… |
| 1.3.6.1.2.1.14.10.1.10 | ColumnospfNbrPermanence | read-only | mandatory | This variable displays the status of the en- try. 'dynamic' and 'permanent' refer to how the neighbor became known. |
| 1.3.6.1.2.1.14.10.1.11 | ColumnospfNbrHelloSuppressed | read-only | mandatory | Indicates whether Hellos are being suppressed to the neighbor |
| 1.3.6.1.2.1.14.11 | TableospfVirtNbrTable | not-accessible | mandatory | A table of virtual neighbor information. |
| 1.3.6.1.2.1.14.11.1 | RowospfVirtNbrEntry | not-accessible | mandatory | Virtual neighbor information. |
| 1.3.6.1.2.1.14.11.1.1 | ColumnospfVirtNbrArea | read-only | mandatory | The Transit Area Identifier. |
| 1.3.6.1.2.1.14.11.1.2 | ColumnospfVirtNbrRtrId | read-only | mandatory | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. |
| 1.3.6.1.2.1.14.11.1.3 | ColumnospfVirtNbrIpAddr | read-only | mandatory | The IP address this Virtual Neighbor is us- ing. |
| 1.3.6.1.2.1.14.11.1.4 | ColumnospfVirtNbrOptions | read-only | mandatory | A Bit Mask corresponding to the neighbor's op- tions field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. … |
| 1.3.6.1.2.1.14.11.1.5 | ColumnospfVirtNbrState | read-only | mandatory | The state of the Virtual Neighbor Relation- ship. |
| 1.3.6.1.2.1.14.11.1.6 | ColumnospfVirtNbrEvents | read-only | mandatory | The number of times this virtual link has changed its state, or an error has occurred. |
| 1.3.6.1.2.1.14.11.1.7 | ColumnospfVirtNbrLsRetransQLen | read-only | mandatory | The current length of the retransmission queue. |
| 1.3.6.1.2.1.14.11.1.8 | ColumnospfVirtNbrHelloSuppressed | read-only | mandatory | Indicates whether Hellos are being suppressed to the neighbor |
| 1.3.6.1.2.1.14.14 | TableospfAreaAggregateTable | not-accessible | mandatory | A range of IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 inclu… |
| 1.3.6.1.2.1.14.14.1 | RowospfAreaAggregateEntry | not-accessible | mandatory | A range of IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 inclu… |
| 1.3.6.1.2.1.14.14.1.1 | ColumnospfAreaAggregateAreaId | read-write | mandatory | The Area the Address Aggregate is to be found within. |
| 1.3.6.1.2.1.14.14.1.2 | ColumnospfAreaAggregateLsdbType | read-write | mandatory | The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to. |
| 1.3.6.1.2.1.14.14.1.3 | ColumnospfAreaAggregateNet | read-write | mandatory | The IP Address of the Net or Subnet indicated by the range. |
| 1.3.6.1.2.1.14.14.1.4 | ColumnospfAreaAggregateMask | read-write | mandatory | The Subnet Mask that pertains to the Net or Subnet. |
| 1.3.6.1.2.1.14.14.1.5 | ColumnospfAreaAggregateStatus | read-write | mandatory | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.2.1.14.14.1.6 | ColumnospfAreaAggregateEffect | read-write | mandatory | Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the subnet's not being advertised at… |