RIELLOMDU-MIB
42 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1213-MIB | DisplayString |
| RIELLO-MIB | rielloMIB |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5491.11 | NodemduMIB | |||
| 1.3.6.1.4.1.5491.11.1 | NodemduIdent | |||
| 1.3.6.1.4.1.5491.11.1.1 | ScalarmduIdentManufacturer | read-only | mandatory | The name of the mdu manufacturer. |
| 1.3.6.1.4.1.5491.11.1.2 | ScalarmduIdentModel | read-only | mandatory | The mdu Model designation. |
| 1.3.6.1.4.1.5491.11.1.3 | ScalarmduIdentSoftwareVersion | read-only | mandatory | The mdu Software version. |
| 1.3.6.1.4.1.5491.11.1.4 | ScalarmduIdentIOConfiguration | read-only | mandatory | The mdu input/output configuration (1 for Mono/mono, 4 for Tri/tri). |
| 1.3.6.1.4.1.5491.11.1.5 | ScalarmduIdentInputSockets | read-only | mandatory | The number of mdu input sockets. |
| 1.3.6.1.4.1.5491.11.1.6 | ScalarmduIdentOutputSockets | read-only | mandatory | The number of mdu output sockets. |
| 1.3.6.1.4.1.5491.11.1.7 | ScalarmduIdentNominalCurrent | read-only | mandatory | The mdu nominal current (A). |
| 1.3.6.1.4.1.5491.11.1.8 | ScalarmduIdentNominalVoltage | read-only | mandatory | The mdu nominal voltage (V). |
| 1.3.6.1.4.1.5491.11.1.9 | ScalarmduIdentNominalFrequency | read-only | mandatory | The mdu nominal frequency (0.1 Hz). |
| 1.3.6.1.4.1.5491.11.2 | NodemduStatus | |||
| 1.3.6.1.4.1.5491.11.2.1 | ScalarmduLineAFrequency | read-only | mandatory | The frequency of source A (0.1 Hz). |
| 1.3.6.1.4.1.5491.11.2.2 | ScalarmduLineAVoltage | read-only | mandatory | The voltage of source 1 (V). |
| 1.3.6.1.4.1.5491.11.2.3 | ScalarmduLineACurrent | read-only | mandatory | The current of line A (0.1 A). |
| 1.3.6.1.4.1.5491.11.2.4 | TablemduOutput | not-accessible | mandatory | A list of output table entries. |
| 1.3.6.1.4.1.5491.11.2.4.1 | RowmduOutputSockets | not-accessible | mandatory | An entry containing information applicable to a particular output line. |
| 1.3.6.1.4.1.5491.11.2.4.1.1 | ColumnmduOutputLineIndex | not-accessible | mandatory | The line identifier. |
| 1.3.6.1.4.1.5491.11.2.4.1.2 | ColumnmduOutputCurrent | read-only | mandatory | Output current (0.1 A) |
| 1.3.6.1.4.1.5491.11.2.4.1.3 | ColumnmduOutputDisabled | read-only | mandatory | 1->line active, 2->line deactivated |
| 1.3.6.1.4.1.5491.11.2.4.1.4 | ColumnmduOutputOverload | read-only | mandatory | 1->line ok, 2->line deactivated for overload |
| 1.3.6.1.4.1.5491.11.2.4.1.5 | ColumnmduOutputStatus | read-only | mandatory | 0=OFF 1=ON 2= Shutdown active (when a CS or a CR command is received but shutdown is not yet been executed and the |
| 1.3.6.1.4.1.5491.11.2.5 | ScalarmduLowInputVoltage | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.11.2.6 | ScalarmduHighInputVoltage | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.11.2.7 | ScalarmduLowInputCurrent | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.11.2.8 | ScalarmduHighInputCurrent | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.11.2.9 | ScalarmduPowerFailAux1 | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.11.2.10 | ScalarmduPowerFailAux2 | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.11.2.11 | ScalarmduManualBypass | read-only | mandatory | 1= on manual bypass, 0= no. |
| 1.3.6.1.4.1.5491.11.2.12 | ScalarmduTemperature | read-only | mandatory | The temperature (°C). |
| 1.3.6.1.4.1.5491.11.3 | NodemduCommand | |||
| 1.3.6.1.4.1.5491.11.3.1 | ScalarmduCommandCode | read-write | mandatory | This object determines the nature of the action to be taken at the time when the countdown of the mduShutdownDelay and mduRestoreDelay objects reaches zero. Se… |
| 1.3.6.1.4.1.5491.11.3.2 | ScalarmduShutdownDelay | read-write | mandatory | Setting this object will shutdown (i.e., turn off) either the MDU output socket by the value of mduCommandCode at the time of shutdown after the indicated numb… |
| 1.3.6.1.4.1.5491.11.3.3 | ScalarmduRestoreDelay | read-write | mandatory | The restore delay. |
| 1.3.6.1.4.1.5491.11.3.4 | ScalarmduOutputSocketApplyCommand | read-write | mandatory | Specify the socket to apply the command, the value 0 apply to all sockets. |
| 1.3.6.1.4.1.5491.11.3.5 | ScalarmduCommandResult | read-only | mandatory | The command result, refer to the follow codes: 0+mduCommandCode Command in progress 256+mduCommandCode Wrong Command code 512+mduCommandCode Command is not han… |
| 1.3.6.1.4.1.5491.11.4 | NodemduTraps | |||
| 1.3.6.1.4.1.5491.11.4.1 | NodemduNormal | This trap is sent when MDU is on normal status | ||
| 1.3.6.1.4.1.5491.11.4.2 | NodemduAnomaly | This trap is sent when MDU is has some anomaly and is resent every minute | ||
| 1.3.6.1.4.1.5491.11.4.3 | NodemduFault | This trap is sent when MDU is has some fault and is resent every minute | ||
| 1.3.6.1.4.1.5491.11.4.4 | NodemduLock | This trap is sent when MDU is locked and is resent every minute | ||
| 1.3.6.1.4.1.5491.11.4.5 | NodemduManualBypassEnabled | This trap is sent when MDU is on manual bypass and is resent every minute |