RIELLOMTS-MIB
75 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1213-MIB | DisplayString |
| RIELLO-MIB | rielloMIB |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5491.12 | NodemtsMIB | |||
| 1.3.6.1.4.1.5491.12.1 | NodemtsIdent | |||
| 1.3.6.1.4.1.5491.12.1.1 | ScalarmtsIdentManufacturer | read-only | mandatory | The name of the mts manufacturer. |
| 1.3.6.1.4.1.5491.12.1.2 | ScalarmtsIdentModel | read-only | mandatory | The mts Model designation. |
| 1.3.6.1.4.1.5491.12.1.3 | ScalarmtsIdentSoftwareVersion | read-only | mandatory | The mts Software version. |
| 1.3.6.1.4.1.5491.12.1.4 | ScalarmtsIdentIOConfiguration | read-only | mandatory | The mts input/output configuration (1 for Mono/mono, 4 for Tri/tri). |
| 1.3.6.1.4.1.5491.12.1.5 | ScalarmtsIdentType | read-only | mandatory | The mts type (5 for ATS, 6 for STS). |
| 1.3.6.1.4.1.5491.12.1.6 | ScalarmtsIdentInputSockets | read-only | mandatory | The number of mts input sockets. |
| 1.3.6.1.4.1.5491.12.1.7 | ScalarmtsIdentOutputSockets | read-only | mandatory | The number of mts output sockets. |
| 1.3.6.1.4.1.5491.12.1.8 | ScalarmtsIdentNominalCurrent | read-only | mandatory | The mts nominal current (A). |
| 1.3.6.1.4.1.5491.12.1.9 | ScalarmtsIdentNominalVoltage | read-only | mandatory | The mts nominal voltage (V). |
| 1.3.6.1.4.1.5491.12.1.10 | ScalarmtsIdentNominalFrequency | read-only | mandatory | The mts nominal frequency (0.1 Hz). |
| 1.3.6.1.4.1.5491.12.2 | NodemtsStatus | |||
| 1.3.6.1.4.1.5491.12.2.1 | ScalarmtsS1Frequency | read-only | mandatory | The frequency of source 1 (0.1 Hz). |
| 1.3.6.1.4.1.5491.12.2.2 | ScalarmtsS1VoltageL1 | read-only | mandatory | The voltage of source 1, line 1 (V). |
| 1.3.6.1.4.1.5491.12.2.3 | ScalarmtsS1VoltageL2 | read-only | mandatory | The voltage of source 1, line 2 (V). |
| 1.3.6.1.4.1.5491.12.2.4 | ScalarmtsS1VoltageL3 | read-only | mandatory | The voltage of source 1, line 3 (V). |
| 1.3.6.1.4.1.5491.12.2.5 | ScalarmtsS2Frequency | read-only | mandatory | The frequency of source 2 (0.1 Hz). |
| 1.3.6.1.4.1.5491.12.2.6 | ScalarmtsS2VoltageL1 | read-only | mandatory | The voltage of source 2, line 1 (V). |
| 1.3.6.1.4.1.5491.12.2.7 | ScalarmtsS2VoltageL2 | read-only | mandatory | The voltage of source 2, line 2 (V). |
| 1.3.6.1.4.1.5491.12.2.8 | ScalarmtsS2VoltageL3 | read-only | mandatory | The voltage of source 2, line 3 (V). |
| 1.3.6.1.4.1.5491.12.2.9 | ScalarmtsPhaseDifference | read-only | mandatory | Phase difference between sources (degrees). |
| 1.3.6.1.4.1.5491.12.2.10 | ScalarmtsLoadL1 | read-only | mandatory | The output load of line 1 (%). |
| 1.3.6.1.4.1.5491.12.2.11 | ScalarmtsLoadL2 | read-only | mandatory | The output load of line 2 (%). |
| 1.3.6.1.4.1.5491.12.2.12 | ScalarmtsLoadL3 | read-only | mandatory | The output load of line 3 (%). |
| 1.3.6.1.4.1.5491.12.2.13 | ScalarmtsOutputCurrentL1 | read-only | mandatory | The output load current of line 1 (0.1 A). |
| 1.3.6.1.4.1.5491.12.2.14 | ScalarmtsOutputCurrentL2 | read-only | mandatory | The output load current of line 2 (0.1 A). |
| 1.3.6.1.4.1.5491.12.2.15 | ScalarmtsOutputCurrentL3 | read-only | mandatory | The output load current of line 3 (0.1 A). |
| 1.3.6.1.4.1.5491.12.2.16 | ScalarmtsTemperature | read-only | mandatory | The temperature (degrees C). |
| 1.3.6.1.4.1.5491.12.2.17 | ScalarmtsSoundOff | read-only | mandatory | 1= sound on, 0= sound off. |
| 1.3.6.1.4.1.5491.12.2.18 | ScalarmtsTestInProgress | read-only | mandatory | 1= test in progress, 0= test not in progress. |
| 1.3.6.1.4.1.5491.12.2.19 | ScalarmtsAuxPower2fail | read-only | mandatory | 1= fail, 0= not fail. |
| 1.3.6.1.4.1.5491.12.2.20 | ScalarmtsAuxPower1fail | read-only | mandatory | 1= fail, 0= not fail. |
| 1.3.6.1.4.1.5491.12.2.21 | ScalarmtsSynchrobad | read-only | mandatory | 1= bad, 0= not bad. |
| 1.3.6.1.4.1.5491.12.2.22 | ScalarmtsPreferredSource | read-only | mandatory | 1= S2, 0= S1. |
| 1.3.6.1.4.1.5491.12.2.23 | ScalarmtsTransferhinibit | read-only | mandatory | 1= hinibit, 0= not hinibit. |
| 1.3.6.1.4.1.5491.12.2.24 | ScalarmtsNonSynchInibit | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.25 | ScalarmtsSourceS2bad | read-only | mandatory | 1= bad, 0= not bad. |
| 1.3.6.1.4.1.5491.12.2.26 | ScalarmtsSourceS1bad | read-only | mandatory | 1= bad, 0= not bad. |
| 1.3.6.1.4.1.5491.12.2.27 | ScalarmtsOnSourceS2 | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.28 | ScalarmtsOnSourceS1 | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.29 | ScalarmtsLocked | read-only | mandatory | 1= locked, 0= not locked. |
| 1.3.6.1.4.1.5491.12.2.30 | ScalarmtsOutputSwitchOff | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.31 | ScalarmtsS2Blackout | read-only | mandatory | 1= blackout, 0= no blackout. |
| 1.3.6.1.4.1.5491.12.2.32 | ScalarmtsS2PhaseseqNotok | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.33 | ScalarmtsS2VoltOutoftolerance | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.34 | ScalarmtsS1SCRAlternateLoss | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.35 | ScalarmtsS1InputSWOff | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.36 | ScalarmtsS1Frequencybad | read-only | mandatory | 1= bad, 0= not bad. |
| 1.3.6.1.4.1.5491.12.2.37 | ScalarmtsS1Balancebad | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.38 | ScalarmtsS1Blackout | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.39 | ScalarmtsS1PhaseseqNotok | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.40 | ScalarmtsS1VoltOutoftolerance | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.41 | ScalarmtsUserlogin | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.42 | ScalarmtsAlarmTemperature | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.43 | ScalarmtsAlarmOverload | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.44 | ScalarmtsGeneralFailure | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.45 | ScalarmtsS2InputMCCBtrip | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.46 | ScalarmtsS1InputMCCBtrip | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.47 | ScalarmtsServicelogin | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.48 | ScalarmtsOutputSCRalternanceloss | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.49 | ScalarmtsManBypassS2 | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.50 | ScalarmtsManBypassS1 | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.51 | ScalarmtsManTransferS2 | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.52 | ScalarmtsManTransferS1 | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.53 | ScalarmtsS2SCRalternanceloss | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.54 | ScalarmtsS2InputSWoff | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.55 | ScalarmtsS2Frequencybad | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.2.56 | ScalarmtsS2Balancebad | read-only | mandatory | 1= yes, 0= no. |
| 1.3.6.1.4.1.5491.12.4 | NodemtsTraps | |||
| 1.3.6.1.4.1.5491.12.4.1 | NodemtsNormal | This trap is sent when STS is on normal status | ||
| 1.3.6.1.4.1.5491.12.4.2 | NodemtsAnomaly | This trap is sent when STS is has some anomaly and is resent every minute | ||
| 1.3.6.1.4.1.5491.12.4.3 | NodemtsFault | This trap is sent when STS is has some fault and is resent every minute | ||
| 1.3.6.1.4.1.5491.12.4.4 | NodemtsLock | This trap is sent when STS is locked and is resent every minute | ||
| 1.3.6.1.4.1.5491.12.4.5 | NodemtsManualBypassEnabled | This trap is sent when STS is on manual bypass and is resent every minute |