RIPv2-MIB
39 objects
The MIB module to describe the RIP2 Version 2 Protocol
Imported Objects
| RFC1213-MIB | mib-2 |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.23 | Identityrip2 | The MIB module to describe the RIP2 Version 2 Protocol | ||
| 1.3.6.1.2.1.23.1 | Noderip2Globals | |||
| 1.3.6.1.2.1.23.1.1 | Scalarrip2GlobalRouteChanges | read-only | current | The number of route changes made to the IP Route Database by RIP. This does not include the refresh of a route's age. |
| 1.3.6.1.2.1.23.1.2 | Scalarrip2GlobalQueries | read-only | current | The number of responses sent to RIP queries from other systems. |
| 1.3.6.1.2.1.23.2 | Tablerip2IfStatTable | not-accessible | current | A list of subnets which require separate status monitoring in RIP. |
| 1.3.6.1.2.1.23.2.1 | Rowrip2IfStatEntry | not-accessible | current | A Single Routing Domain in a single Subnet. |
| 1.3.6.1.2.1.23.2.1.1 | Columnrip2IfStatAddress | read-only | current | The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for… |
| 1.3.6.1.2.1.23.2.1.2 | Columnrip2IfStatRcvBadPackets | read-only | current | The number of RIP response packets received by the RIP process which were subsequently discarded for any reason (e.g. a version 0 packet, or an unknown command… |
| 1.3.6.1.2.1.23.2.1.3 | Columnrip2IfStatRcvBadRoutes | read-only | current | The number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family, or invalid metric). |
| 1.3.6.1.2.1.23.2.1.4 | Columnrip2IfStatSentUpdates | read-only | current | The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information. |
| 1.3.6.1.2.1.23.2.1.5 | Columnrip2IfStatStatus | read-create | current | Writing invalid has the effect of deleting this interface. |
| 1.3.6.1.2.1.23.3 | Tablerip2IfConfTable | not-accessible | current | A list of subnets which require separate configuration in RIP. |
| 1.3.6.1.2.1.23.3.1 | Rowrip2IfConfEntry | not-accessible | current | A Single Routing Domain in a single Subnet. |
| 1.3.6.1.2.1.23.3.1.1 | Columnrip2IfConfAddress | read-only | current | The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for… |
| 1.3.6.1.2.1.23.3.1.2 | Columnrip2IfConfDomain | read-create | obsolete | Value inserted into the Routing Domain field of all RIP packets sent on this interface. |
| 1.3.6.1.2.1.23.3.1.3 | Columnrip2IfConfAuthType | read-create | current | The type of Authentication used on this interface. |
| 1.3.6.1.2.1.23.3.1.4 | Columnrip2IfConfAuthKey | read-create | current | The value to be used as the Authentication Key whenever the corresponding instance of rip2IfConfAuthType has a value other than noAuthentication. A modificatio… |
| 1.3.6.1.2.1.23.3.1.5 | Columnrip2IfConfSend | read-create | current | What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates usi… |
| 1.3.6.1.2.1.23.3.1.6 | Columnrip2IfConfReceive | read-create | current | This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets. |
| 1.3.6.1.2.1.23.3.1.7 | Columnrip2IfConfDefaultMetric | read-create | current | This variable indicates the metric that is to be used for the default route entry in RIP updates originated on this interface. A value of zero indicates that n… |
| 1.3.6.1.2.1.23.3.1.8 | Columnrip2IfConfStatus | read-create | current | Writing invalid has the effect of deleting this interface. |
| 1.3.6.1.2.1.23.3.1.9 | Columnrip2IfConfSrcAddress | read-create | current | The IP Address this system will use as a source address on this interface. If it is a numbered interface, this MUST be the same value as rip2IfConfAddress. On … |
| 1.3.6.1.2.1.23.4 | Tablerip2PeerTable | not-accessible | current | A list of RIP Peers. |
| 1.3.6.1.2.1.23.4.1 | Rowrip2PeerEntry | not-accessible | current | Information regarding a single routing peer. |
| 1.3.6.1.2.1.23.4.1.1 | Columnrip2PeerAddress | read-only | current | The IP Address that the peer is using as its source address. Note that on an unnumbered link, this may not be a member of any subnet on the system. |
| 1.3.6.1.2.1.23.4.1.2 | Columnrip2PeerDomain | read-only | current | The value in the Routing Domain field in RIP packets received from the peer. As domain suuport is deprecated, this must be zero. |
| 1.3.6.1.2.1.23.4.1.3 | Columnrip2PeerLastUpdate | read-only | current | The value of sysUpTime when the most recent RIP update was received from this system. |
| 1.3.6.1.2.1.23.4.1.4 | Columnrip2PeerVersion | read-only | current | The RIP version number in the header of the last RIP packet received. |
| 1.3.6.1.2.1.23.4.1.5 | Columnrip2PeerRcvBadPackets | read-only | current | The number of RIP response packets from this peer discarded as invalid. |
| 1.3.6.1.2.1.23.4.1.6 | Columnrip2PeerRcvBadRoutes | read-only | current | The number of routes from this peer that were ignored because the entry format was invalid. |
| 1.3.6.1.2.1.23.5 | Noderip2Conformance | |||
| 1.3.6.1.2.1.23.5.1 | Noderip2Groups | |||
| 1.3.6.1.2.1.23.5.1.1 | Grouprip2GlobalGroup | current | This group defines global controls for RIP-II systems. | |
| 1.3.6.1.2.1.23.5.1.2 | Grouprip2IfStatGroup | current | This group defines interface statistics for RIP-II systems. | |
| 1.3.6.1.2.1.23.5.1.3 | Grouprip2IfConfGroup | current | This group defines interface configuration for RIP-II systems. | |
| 1.3.6.1.2.1.23.5.1.4 | Grouprip2PeerGroup | current | This group defines peer information for RIP-II systems. | |
| 1.3.6.1.2.1.23.5.2 | Noderip2Compliances | |||
| 1.3.6.1.2.1.23.5.2.1 | Compliancerip2Compliance | current | The compliance statement |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RouteTag | OCTET STRING (SIZE (2)) | current | the RouteTag type represents the contents of the Route Domain field in the packet header or route entry |