RITTAL-CMC-III-MIB
372 objects
The MIB module for representing cmcIII SNMP agent.
Imported Objects
| RITTAL-SMI-MIB | rittal |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-MIB | sysObjectID |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2606.7 | IdentitycmcIII | The MIB module for representing cmcIII SNMP agent. | ||
| 1.3.6.1.4.1.2606.7.0 | NodecmcIIINotifications | |||
| 1.3.6.1.4.1.2606.7.0.1 | NotificationalarmSensorDevice | current | Alarm of sensors of device. | |
| 1.3.6.1.4.1.2606.7.0.2 | NotificationalarmDevice | current | Alarm of device. | |
| 1.3.6.1.4.1.2606.7.0.3 | NotificationreConfigAgent | current | Agent reconfiguration. | |
| 1.3.6.1.4.1.2606.7.0.4 | NotificationshutdownAgent | current | Agent shutdown. | |
| 1.3.6.1.4.1.2606.7.1 | NodecmcIIIMibRev | |||
| 1.3.6.1.4.1.2606.7.1.1 | ScalarcmcIIIMibMajRev | read-only | current | The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level m… |
| 1.3.6.1.4.1.2606.7.1.2 | ScalarcmcIIIMibMinRev | read-only | current | The Minor Revision level. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occu… |
| 1.3.6.1.4.1.2606.7.1.3 | ScalarcmcIIIAgentRev | read-only | current | The SNMP Agent Revision level. |
| 1.3.6.1.4.1.2606.7.1.4 | ScalarcmcIIICapabilityRev | read-only | current | This agents capabilities as used in RITTAL-CMC-III-CAPABILITY-MIB. |
| 1.3.6.1.4.1.2606.7.2 | NodecmcIIIUnit | |||
| 1.3.6.1.4.1.2606.7.2.1 | ScalarcmcIIIUnitStatus | read-only | current | General Status of CMCIII PU unit itself (1) OK (2) failed (3) overload (current too high). |
| 1.3.6.1.4.1.2606.7.2.2 | ScalarcmcIIIUnitURL | read-only | current | URL of CMCIII PU. |
| 1.3.6.1.4.1.2606.7.2.3 | ScalarcmcIIIUnitHWRev | read-only | current | Hardware Revision of CMCIII PU. |
| 1.3.6.1.4.1.2606.7.2.4 | ScalarcmcIIIUnitFWRev | read-only | current | Firmware Revision of CMCIII PU. |
| 1.3.6.1.4.1.2606.7.2.5 | ScalarcmcIIIUnitOSRev | read-only | current | Linux Revision of CMCIII PU. |
| 1.3.6.1.4.1.2606.7.2.6 | ScalarcmcIIIUnitSerial | read-only | current | Serial Number of CMCIII PU. |
| 1.3.6.1.4.1.2606.7.2.7 | ScalarcmcIIIUnitProd | read-only | current | Production Code of CMCIII PU. |
| 1.3.6.1.4.1.2606.7.2.8 | ScalarcmcIIIUnitType | read-only | current | Type of controller (1) Unit unknown (2) Processing Unit (3) Processing Unit Compact (4) LCP (5) PDU (6) RiMatrix S (7) MCS (8) IoT Interface (9) PDUi. |
| 1.3.6.1.4.1.2606.7.2.9 | ScalarcmcIIIUnitCurrentSource | read-only | current | Current source of CMCIII PU (1) unknown (2) AC Adapter Power Supply (3) Terminal Strip (4) poe: Power Over Ethernet (5) usb: Universal Serial Bus. |
| 1.3.6.1.4.1.2606.7.2.10 | ScalarcmcIIICan0CurrentConsumption | read-only | current | Maximal current consumption required by CANopen fieldbus 1. |
| 1.3.6.1.4.1.2606.7.2.11 | ScalarcmcIIICan1CurrentConsumption | read-only | current | Maximal current consumption required by CANopen fieldbus 2. |
| 1.3.6.1.4.1.2606.7.2.12 | ScalarcmcIIIUnitUpTime | read-only | current | Operating time of CMCIII PU in seconds since an epoch. |
| 1.3.6.1.4.1.2606.7.2.13 | ScalarcmcIIIUnitMode | read-only | current | Current status mode of CMCIII PU and all subsystems (1) local init ini progress (2) start local system first time (3) first start delay (4) restart bus system,… |
| 1.3.6.1.4.1.2606.7.2.14 | TablecmcIIIUnitLoadTable | not-accessible | current | A list of system load entries. |
| 1.3.6.1.4.1.2606.7.2.14.1 | RowcmcIIIUnitLoadEntry | not-accessible | current | Entries of system load table. |
| 1.3.6.1.4.1.2606.7.2.14.1.1 | ColumncmcIIIUnitLoadIndex | not-accessible | current | Index for the system load table. These are the past minutes the load is given for. |
| 1.3.6.1.4.1.2606.7.2.14.1.2 | ColumncmcIIIUnitLoadAverage | read-only | current | System load average multiplied by 100. |
| 1.3.6.1.4.1.2606.7.3 | NodecmcIIISetup | |||
| 1.3.6.1.4.1.2606.7.3.1 | ScalarcmcIIILastChangeSetup | read-only | current | Last change of configuration according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.3.2 | NodecmcIIISetupGeneral | |||
| 1.3.6.1.4.1.2606.7.3.2.1 | ScalarcmcIIISetTempUnit | read-write | current | Unit of all temperature values and setpoints. |
| 1.3.6.1.4.1.2606.7.3.2.2 | ScalarcmcIIISetBeeper | read-write | current | Audible alarm in CMCIII unit: (1) beeper is off (general) (2) beeper is on. |
| 1.3.6.1.4.1.2606.7.3.2.3 | ScalarcmcIIIQuitRelay | read-write | current | Enable or disable acknowledging currently active alarm relay (with 'C' on CMCIII). |
| 1.3.6.1.4.1.2606.7.3.2.4 | ScalarcmcIIILogicRelay | read-write | current | Logic of alarm relay: (1) Relay will pick up in case of an alarm (2) Relay will release in case of an alarm (3) Relay disabled. |
| 1.3.6.1.4.1.2606.7.3.2.5 | ScalarcmcIIIUnitMsgRelay | read-write | current | Alarm relay in case of Device Messages (detect, lost, changed..): (1) Relay disabled, relay will not switch in case of a device message (2) Relay enabled, rela… |
| 1.3.6.1.4.1.2606.7.3.2.6 | ScalarcmcIIIFunctionRelay | read-write | current | Logic of alarm relay: (1) Relay will switch in case of a warning only (2) Relay will switch in case of an alarm only (3) Relay will switch in case of an alarm … |
| 1.3.6.1.4.1.2606.7.3.2.7 | ScalarcmcIIITimeZone | read-write | current | Time Zone 0 : (GMT-12:00) International Date Line West 1 : (GMT-11:00) Midway Island, Samoa 2 : (GMT-10:00) Hawaii 3 : (GMT-09:00) Alaska 4 : (GMT-08:00) Pacif… |
| 1.3.6.1.4.1.2606.7.3.2.8 | ScalarcmcIIISetupDate | read-write | current | Actual date in format DD.MM.YYYY Use UTC date to set date. |
| 1.3.6.1.4.1.2606.7.3.2.9 | ScalarcmcIIISetupTime | read-write | current | Actual time in format HH:MM:SS, HH (0-23), MM (0-59), SS (0-59). Use UTC time to set time. |
| 1.3.6.1.4.1.2606.7.3.2.10 | ScalarcmcIIIWebAccess | read-write | current | Web access status: (0) httpEnabled : http protocol is enabled (1) httpsEnabled : https protocol is enabled. |
| 1.3.6.1.4.1.2606.7.3.2.11 | ScalarcmcIIIHttpPort | read-write | current | TCP/IP port of HTTP daemon. |
| 1.3.6.1.4.1.2606.7.3.2.12 | ScalarcmcIIIHttpsPort | read-write | current | TCP/IP port of HTTPS daemon. |
| 1.3.6.1.4.1.2606.7.3.2.13 | ScalarcmcIIIFtpAccess | read-write | current | Ftp access: (1) disabled (2) enabled. |
| 1.3.6.1.4.1.2606.7.3.2.14 | ScalarcmcIIIFtpPort | read-write | current | TCP/IP port of FTP daemon. |
| 1.3.6.1.4.1.2606.7.3.2.15 | ScalarcmcIIISshAccess | read-write | current | Ssh access: (1) disabled (2) enabled. |
| 1.3.6.1.4.1.2606.7.3.2.16 | ScalarcmcIIISshPort | read-write | current | TCP/IP port of SSH daemon. |
| 1.3.6.1.4.1.2606.7.3.2.17 | ScalarcmcIIITelnetAccess | read-write | current | Telnet access: (1) disabled (2) enabled. |
| 1.3.6.1.4.1.2606.7.3.2.18 | ScalarcmcIIITelnetPort | read-write | current | TCP/IP port of telnet daemon. |
| 1.3.6.1.4.1.2606.7.3.2.19 | ScalarcmcIIILanguage | read-write | current | Language: (1) English. (2) German, (3) French, (4) Spanish, (5) Portuguese, (6) Russian, (7) Chinese (8) Japanese. |
| 1.3.6.1.4.1.2606.7.3.2.20 | ScalarcmcIIIOpcUaAccess | read-write | current | OPC UA access: (1) disabled (2) enabled. |
| 1.3.6.1.4.1.2606.7.3.2.21 | ScalarcmcIIIOpcUaPort | read-write | current | TCP/IP port of OPC UA daemon. |
| 1.3.6.1.4.1.2606.7.3.2.22 | ScalarcmcIIISetFlowUnit | read-write | current | Unit of all flow values and setpoints (1) literMin (2) gallonMin. |
| 1.3.6.1.4.1.2606.7.3.3 | NodecmcIIISetupTimer | |||
| 1.3.6.1.4.1.2606.7.3.3.1 | ScalarcmcIIINumberOfTimers | read-only | current | Number of value table entries=number of outlets available on this unit. |
| 1.3.6.1.4.1.2606.7.3.3.2 | TablecmcIIITimerTable | not-accessible | current | Headline of Timer Table. |
| 1.3.6.1.4.1.2606.7.3.3.2.1 | RowcmcIIITimerEntry | not-accessible | current | Entries of Timer Table. |
| 1.3.6.1.4.1.2606.7.3.3.2.1.1 | ColumncmcIIITimerIndex | not-accessible | current | Index for the list of timer entries. Its value ranges between 1 and the value of cmcIIINumberOfTimers. |
| 1.3.6.1.4.1.2606.7.3.3.2.1.2 | ColumncmcIIITimerStatus | read-only | current | Actual status of the timer. |
| 1.3.6.1.4.1.2606.7.3.3.2.1.3 | ColumncmcIIITimerDayOfWeek | read-write | current | Selection of day of week for timer to switch. |
| 1.3.6.1.4.1.2606.7.3.3.2.1.4 | ColumncmcIIITimeOn | read-write | current | Time to switch on current function, Format: HH:MM. |
| 1.3.6.1.4.1.2606.7.3.3.2.1.5 | ColumncmcIIITimeOff | read-write | current | Time to switch off current function, Format: HH:MM. |
| 1.3.6.1.4.1.2606.7.3.3.2.1.6 | ColumncmcIIITimeControl | read-write | current | Control via RTC. |
| 1.3.6.1.4.1.2606.7.3.3.2.1.7 | ColumncmcIIITimerFunction | read-write | current | Function which is controlled via timer 1: Unlock of doors via keypad is disabled 2: Doors will be unlocked 3-6: sending traps to this trap receiver will be dis… |
| 1.3.6.1.4.1.2606.7.3.4 | NodecmcIIISetupTrap | |||
| 1.3.6.1.4.1.2606.7.3.4.1 | ScalarcmcIIINumberOfTrapReceivers | read-only | current | Number of TrapReceiverTable entries. The number of trap receivers. |
| 1.3.6.1.4.1.2606.7.3.4.2 | TablecmcIIITrapReceiverTable | not-accessible | current | A list of trap receiver entries. |
| 1.3.6.1.4.1.2606.7.3.4.2.1 | RowcmcIIITrapReceiverEntry | not-accessible | current | Entries of trapTable. |
| 1.3.6.1.4.1.2606.7.3.4.2.1.1 | ColumncmcIIITrapReceiverIndex | not-accessible | current | Index for the trap receiver table. Its value ranges between 1 and the value of NumberOfTrapReceivers. |
| 1.3.6.1.4.1.2606.7.3.4.2.1.2 | ColumncmcIIITrapReceiverStatus | read-write | current | Enable SNMP version and trap/inform type or disable trap receiver. Enumeration type snmpv3Inform(6) is not yet supported. |
| 1.3.6.1.4.1.2606.7.3.4.2.1.3 | ColumncmcIIITrapReceiverIpAddress | read-write | current | IP address of trap receiver. |
| 1.3.6.1.4.1.2606.7.3.5 | NodecmcIIISetupSMTP | |||
| 1.3.6.1.4.1.2606.7.3.5.1 | ScalarcmcIIISmtpStatus | read-write | current | SMTP (email) usage: (1) disabled (2) enabled. |
| 1.3.6.1.4.1.2606.7.3.5.2 | ScalarcmcIIISmtpServer | read-write | current | IP address of SMTP server. |
| 1.3.6.1.4.1.2606.7.3.5.3 | ScalarcmcIIISmtpPort | read-write | current | TCP/IP port of SMTP server. |
| 1.3.6.1.4.1.2606.7.3.5.4 | ScalarcmcIIISmtpAuth | read-write | current | SMTP authentication usage: (1) disabled (2) enabled (3) enabled with TLS support. |
| 1.3.6.1.4.1.2606.7.3.5.5 | ScalarcmcIIISmtpUsername | read-write | current | Username required to authenticate at the SMTP server. |
| 1.3.6.1.4.1.2606.7.3.5.6 | ScalarcmcIIISmtpPassword | read-write | current | Password required to authenticate at the SMTP server. |
| 1.3.6.1.4.1.2606.7.3.5.7 | ScalarcmcIIISmtpSender | read-write | current | Sender address (FROM:) of the SMTP message. |
| 1.3.6.1.4.1.2606.7.3.5.8 | ScalarcmcIIISmtpReply | read-write | current | Reply address (REPLY:) of the SMTP message. |
| 1.3.6.1.4.1.2606.7.3.5.9 | ScalarcmcIIINumberOfSmtpReceivers | read-only | current | Number of SmtpReceiverTable entries. The number of SMTP receivers. |
| 1.3.6.1.4.1.2606.7.3.5.10 | TablecmcIIISmtpReceiverTable | not-accessible | current | A list of SMTP receiver entries. |
| 1.3.6.1.4.1.2606.7.3.5.10.1 | RowcmcIIISmtpReceiverEntry | not-accessible | current | Entries of SMTPTable. |
| 1.3.6.1.4.1.2606.7.3.5.10.1.1 | ColumncmcIIISmtpReceiverIndex | not-accessible | current | Index for the SMTP receiver table. Its value ranges between 1 and the value of NumberOfSmtpReceivers. |
| 1.3.6.1.4.1.2606.7.3.5.10.1.2 | ColumncmcIIISmtpReceiverStatus | read-write | current | Enable or disable SMTP receiver. |
| 1.3.6.1.4.1.2606.7.3.5.10.1.3 | ColumncmcIIISmtpReceiverAddress | read-write | current | IP address of SMTP receiver. |
| 1.3.6.1.4.1.2606.7.3.6 | NodecmcIIISetupSMS | |||
| 1.3.6.1.4.1.2606.7.3.6.1 | ScalarcmcIIISmsStatus | read-write | current | SMS usage: (1) disabled (2) enabled. |
| 1.3.6.1.4.1.2606.7.3.6.2 | ScalarcmcIIISmsPIN | read-write | current | SMS PIN number. |
| 1.3.6.1.4.1.2606.7.3.6.3 | ScalarcmcIIISmsService | read-write | current | SMS service number. |
| 1.3.6.1.4.1.2606.7.3.6.4 | ScalarcmcIIISmsMSN | read-write | current | SMS MSN for ISDN. |
| 1.3.6.1.4.1.2606.7.3.6.5 | ScalarcmcIIISmsPreDial | read-write | current | SMS PreDial number. |
| 1.3.6.1.4.1.2606.7.3.6.6 | ScalarcmcIIINumberOfSmsReceivers | read-only | current | Number of SmsReceiverTable entries. The number of SMS receivers. |
| 1.3.6.1.4.1.2606.7.3.6.7 | TablecmcIIISmsReceiverTable | not-accessible | current | A list of SMS receiver entries. |
| 1.3.6.1.4.1.2606.7.3.6.7.1 | RowcmcIIISmsReceiverEntry | not-accessible | current | Entries of SMSTable. |
| 1.3.6.1.4.1.2606.7.3.6.7.1.1 | ColumncmcIIISmsReceiverIndex | not-accessible | current | Index for the SMS receiver table. Its value ranges between 1 and the value of NumberOfSmsReceivers. |
| 1.3.6.1.4.1.2606.7.3.6.7.1.2 | ColumncmcIIISmsReceiverStatus | read-write | current | Enable or disable SMS receiver. |
| 1.3.6.1.4.1.2606.7.3.6.7.1.3 | ColumncmcIIISmsReceiverNumber | read-write | current | Phone number of SMS receiver. |
| 1.3.6.1.4.1.2606.7.3.7 | NodecmcIIISetupSysLog | |||
| 1.3.6.1.4.1.2606.7.3.7.1 | ScalarcmcIIISysLogStatus | read-write | current | SysLog usage: (1) disabled (2) enabled. |
| 1.3.6.1.4.1.2606.7.3.7.2 | ScalarcmcIIISysLogFacility | read-write | current | SysLog facility local0..7. |
| 1.3.6.1.4.1.2606.7.3.7.3 | ScalarcmcIIISysLogServer1 | read-write | current | IP address of first SysLog server. |
| 1.3.6.1.4.1.2606.7.3.7.4 | ScalarcmcIIISysLogServer2 | read-write | current | IP address of second SysLog server. |
| 1.3.6.1.4.1.2606.7.3.8 | NodecmcIIISetupNTP | |||
| 1.3.6.1.4.1.2606.7.3.8.1 | ScalarcmcIIINtpStatus | read-write | current | NTP usage: (1) disabled (2) enabled. |
| 1.3.6.1.4.1.2606.7.3.8.2 | ScalarcmcIIINtpTimeZone | read-write | current | NTP time zone, see cmcIIITimeZone for valid time zones. |
| 1.3.6.1.4.1.2606.7.3.8.3 | ScalarcmcIIINtpServer1 | read-write | current | IP address of first NTP server. |
| 1.3.6.1.4.1.2606.7.3.8.4 | ScalarcmcIIINtpServer2 | read-write | current | IP address of second NTP server. |
| 1.3.6.1.4.1.2606.7.3.9 | NodecmcIIISetupLDAP | |||
| 1.3.6.1.4.1.2606.7.3.9.1 | ScalarcmcIIILdapStatus | read-write | current | LDAP usage: (1) disabled (2) enabled. |
| 1.3.6.1.4.1.2606.7.3.9.2 | ScalarcmcIIILdapServer | read-write | current | IP address of LDAP server. |
| 1.3.6.1.4.1.2606.7.3.9.3 | ScalarcmcIIILdapBindDN | read-write | current | LDAP user name. |
| 1.3.6.1.4.1.2606.7.3.9.4 | ScalarcmcIIILdapBindPW | read-write | current | LDAP user password. |
| 1.3.6.1.4.1.2606.7.3.9.5 | ScalarcmcIIILdapUserBase | read-write | current | LDAP base user. |
| 1.3.6.1.4.1.2606.7.3.9.6 | ScalarcmcIIILdapUserSearch | read-write | current | LDAP searchpath user. |
| 1.3.6.1.4.1.2606.7.3.9.7 | ScalarcmcIIILdapUserAttrib | read-write | current | LDAP attribute user. |
| 1.3.6.1.4.1.2606.7.3.9.8 | ScalarcmcIIILdapGroupBase | read-write | current | LDAP base group. |
| 1.3.6.1.4.1.2606.7.3.9.9 | ScalarcmcIIILdapGroupSearch | read-write | current | LDAP searchpath group. |
| 1.3.6.1.4.1.2606.7.3.9.10 | ScalarcmcIIILdapGroupAttrib | read-write | current | LDAP attribute group. |
| 1.3.6.1.4.1.2606.7.3.10 | NodecmcIIISetupShutdown | |||
| 1.3.6.1.4.1.2606.7.3.10.1 | ScalarcmcIIINumberOfShutdowns | read-only | current | Number of cmcIIIShutdownTable entries. The number of shutdown servers. |
| 1.3.6.1.4.1.2606.7.3.10.2 | TablecmcIIIShutdownTable | not-accessible | current | A list of shutdown entries. |
| 1.3.6.1.4.1.2606.7.3.10.2.1 | RowcmcIIIShutdownEntry | not-accessible | current | Entries of Shutdown table. |
| 1.3.6.1.4.1.2606.7.3.10.2.1.1 | ColumncmcIIIShutdownIndex | not-accessible | current | Index for the shutdown server table. Its value ranges between 1 and the value of cmcIIINumberOfShutdowns. |
| 1.3.6.1.4.1.2606.7.3.10.2.1.2 | ColumncmcIIIShutdownServer | read-write | current | IP address or name of server to shutdown. |
| 1.3.6.1.4.1.2606.7.3.10.2.1.3 | ColumncmcIIIShutdownName | read-write | current | Name of server to shutdown. |
| 1.3.6.1.4.1.2606.7.3.10.2.1.4 | ColumncmcIIIShutdownPort | read-write | current | Port used to shutdown server. |
| 1.3.6.1.4.1.2606.7.3.10.2.1.5 | ColumncmcIIIShutdownDelay | read-write | current | Delay of server shutdown. |
| 1.3.6.1.4.1.2606.7.3.10.2.1.6 | ColumncmcIIIShutdownEnabled | read-write | current | Enable or disable this server shutdown entry. |
| 1.3.6.1.4.1.2606.7.3.11 | NodecmcIIISetupModbus | |||
| 1.3.6.1.4.1.2606.7.3.11.1 | ScalarcmcIIIModbusStatus | read-write | current | Modbus daemon running status: (1) shutdown (2) readonly (3) writeonly (4) readwrite. |
| 1.3.6.1.4.1.2606.7.3.11.2 | ScalarcmcIIIModbusPort | read-write | current | TCP/IP port of Modbus daemon. |
| 1.3.6.1.4.1.2606.7.3.11.3 | ScalarcmcIIINumberOfModbusSources | read-only | current | Number of cmcIIIModbusTable entries. The number of Modbus access settings. |
| 1.3.6.1.4.1.2606.7.3.11.4 | TablecmcIIIModbusTable | not-accessible | current | A list of Modbus entries. |
| 1.3.6.1.4.1.2606.7.3.11.4.1 | RowcmcIIIModbusEntry | not-accessible | current | Entries of Modbus table. |
| 1.3.6.1.4.1.2606.7.3.11.4.1.1 | ColumncmcIIIModbusIndex | not-accessible | current | Index for the Modbus access table. Its value ranges between 1 and the value of cmcIIINumberOfModbusSources. |
| 1.3.6.1.4.1.2606.7.3.11.4.1.2 | ColumncmcIIIModbusAccess | read-write | current | Modbus access for this source entry: (1) readonly (2) readwrite This access is inferior to cmcIIIModbusStatus, e.g. readwrite access also requires readwrite st… |
| 1.3.6.1.4.1.2606.7.3.11.4.1.3 | ColumncmcIIIModbusSource | read-write | current | Source to restrict Modbus access. It can either be a specific hostname, IP address, or a subnet represented as IP/MASK (e.g. 10.10.10.0/255.255.255.0), or IP/B… |
| 1.3.6.1.4.1.2606.7.3.12 | NodecmcIIISetupRadius | |||
| 1.3.6.1.4.1.2606.7.3.12.1 | ScalarcmcIIIRadiusStatus | read-write | current | Radius usage: (1) disabled (2) enabled. |
| 1.3.6.1.4.1.2606.7.3.12.2 | ScalarcmcIIIRadiusServer | read-write | current | IP address of Radius server. |
| 1.3.6.1.4.1.2606.7.3.12.3 | ScalarcmcIIIRadiusPort | read-write | current | TCP/IP port of Radius server. |
| 1.3.6.1.4.1.2606.7.3.12.4 | ScalarcmcIIIRadiusPassword | read-write | current | Password required to authenticate at the Radius server. |
| 1.3.6.1.4.1.2606.7.3.12.5 | ScalarcmcIIIRadiusGroupMode | read-write | current | Radius group method: (1) manual (2) byAttribute. |
| 1.3.6.1.4.1.2606.7.3.12.6 | ScalarcmcIIIRadiusGroupId | read-write | current | Radius group id. |
| 1.3.6.1.4.1.2606.7.3.12.7 | ScalarcmcIIIRadiusAuth | read-write | current | Radius authentification method: (1) auto - not supported (2) pap (3) chap (4) mschap (5) md5. |
| 1.3.6.1.4.1.2606.7.3.13 | NodecmcIIISetupWebCam | |||
| 1.3.6.1.4.1.2606.7.3.13.1 | ScalarcmcIIIWebCamStatus | read-write | current | WebCam usage: (1) disabled (2) enabled. |
| 1.3.6.1.4.1.2606.7.3.13.2 | ScalarcmcIIIWebCamServer | read-write | current | IP address of WebCam. |
| 1.3.6.1.4.1.2606.7.3.13.3 | ScalarcmcIIIWebCamUsername | read-write | current | Username required to authenticate at the WebCam server. |
| 1.3.6.1.4.1.2606.7.3.13.4 | ScalarcmcIIIWebCamPassword | read-write | current | Password required to authenticate at the WebCam server. |
| 1.3.6.1.4.1.2606.7.3.13.5 | ScalarcmcIIIWebCamIntervall | read-write | current | WebCam snapshot intervall in 1/10 seconds. |
| 1.3.6.1.4.1.2606.7.3.13.6 | ScalarcmcIIIWebCamNumberofImages | read-write | current | WebCam number of images per event. |
| 1.3.6.1.4.1.2606.7.3.13.7 | ScalarcmcIIIWebCamDestination | read-write | current | WebCam storage destination: (1) usb (2) sd. |
| 1.3.6.1.4.1.2606.7.4 | NodecmcIIIDevice | |||
| 1.3.6.1.4.1.2606.7.4.1 | NodecmcIIIDevs | |||
| 1.3.6.1.4.1.2606.7.4.1.1 | NodecmcIIIDevInfo | |||
| 1.3.6.1.4.1.2606.7.4.1.1.1 | ScalarcmcIIIOverallDevStatus | read-only | current | Overall status of all devices. |
| 1.3.6.1.4.1.2606.7.4.1.1.2 | ScalarcmcIIINumberOfDevs | read-only | current | Number of devices available. |
| 1.3.6.1.4.1.2606.7.4.1.1.3 | ScalarcmcIIILastChangeOverallDevStatus | read-only | current | Timestamp of last status change of any device connected to CMCIII PU according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.4.1.1.4 | ScalarcmcIIILastChangeNumberOfDevs | read-only | current | Timestamp of last device number change according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.4.1.1.5 | ScalarcmcIIILastChangeDevSettings | read-only | current | Timestamp of last setting change of any device connected to CMCIII PU according to operating time cmcIIIUnitUpTime. This timestamp will be affected by SNMP set… |
| 1.3.6.1.4.1.2606.7.4.1.1.6 | ScalarcmcIIILastChangeDevs | read-only | current | Timestamp of last device change according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.4.1.2 | TablecmcIIIDevTable | not-accessible | current | Headline of device table. |
| 1.3.6.1.4.1.2606.7.4.1.2.1 | RowcmcIIIDevEntry | not-accessible | current | Entries of device table. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.1 | ColumncmcIIIDevIndex | not-accessible | current | Index of device connected to CMCIII PU. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.2 | ColumncmcIIIDevName | read-only | current | Name of the device connected to CMCIII PU. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.3 | ColumncmcIIIDevAlias | read-write | current | Descriptional text for device connected to CMCIII PU. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.4 | ColumncmcIIIDevType | read-only | current | Type of device chassis connected to CMCIII PU. The authoritative identification of the device contained in the entity is allocated within the SMI cmcIIIProduct… |
| 1.3.6.1.4.1.2606.7.4.1.2.1.5 | ColumncmcIIIDevNodeID | read-only | current | Node ID of device connected to CMCIII PU. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.6 | ColumncmcIIIDevStatus | read-only | current | General Status of device connected to CMCIII PU (1) Device not available (2) OK (3) Device detected, confirmation required (4) Device lost (disconnected), conf… |
| 1.3.6.1.4.1.2606.7.4.1.2.1.7 | ColumncmcIIIDevArtNr | read-only | current | Article number of device connected to CMCIII PU. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.8 | ColumncmcIIIDevLocation | read-write | current | Location of device connected to CMCIII PU. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.9 | ColumncmcIIIDevBus | read-only | current | CAN bus of device connected to CMCIII PU. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.10 | ColumncmcIIIDevPos | read-only | current | Position (order) of device in CAN bus connected to CMCIII PU. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.11 | ColumncmcIIIDevFW | read-only | current | FW version of device connected to CMCIII PU. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.12 | ColumncmcIIIDevHW | read-only | current | HW version of device connected to CMCIII PU. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.13 | ColumncmcIIIDevSerial | read-only | current | Serial number of device connected to CMCIII PU. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.14 | ColumncmcIIIDevProductWeek | read-only | current | Production week of device connected to CMCIII PU. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.15 | ColumncmcIIIDevLastChange | read-only | current | Timestamp of last change of device connected to CMCIII PU according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.16 | ColumncmcIIIDevURL | read-only | current | URL to device page of CMCIII PU (if available). |
| 1.3.6.1.4.1.2606.7.4.1.2.1.17 | ColumncmcIIIDevNumberOfVars | read-only | current | Number of variables available on this device. This variable will give the number of rows of the variable table cmcIIIVarTable belonging to this device. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.18 | ColumncmcIIIDevNumberOfMsgs | read-only | current | Number of messages available in this device. This variable will give the number of rows of the message table cmcIIIMsgTable belonging to this device. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.19 | ColumncmcIIIDevStatusText | read-only | current | Latest status of this device. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.20 | ColumncmcIIIDevCurrentMinConsumption | read-only | current | Standby power consumption of device in mA. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.21 | ColumncmcIIIDevCurrentMaxConsumption | read-only | current | Maximal power consumption of device in mA. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.22 | ColumncmcIIIDevEntPhysicalIndex | read-only | current | Corresponding entPhysicalIndex of this device. 0 if none exists. |
| 1.3.6.1.4.1.2606.7.4.1.2.1.23 | ColumncmcIIIDevAssembly | read-only | current | Assembly of this device. |
| 1.3.6.1.4.1.2606.7.4.2 | NodecmcIIIVars | |||
| 1.3.6.1.4.1.2606.7.4.2.1 | NodecmcIIIVarInfo | |||
| 1.3.6.1.4.1.2606.7.4.2.1.1 | ScalarcmcIIINumberOfVars | read-only | current | Total number of variables available. |
| 1.3.6.1.4.1.2606.7.4.2.1.2 | ScalarcmcIIILastChangeNumberOfVars | read-only | current | Timestamp of last change number of variables according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.4.2.1.3 | ScalarcmcIIILastChangeVarSettings | read-only | current | Timestamp of last setting change according to operating time cmcIIIUnitUpTime This timestamp will be affected by SNMP settings only! |
| 1.3.6.1.4.1.2606.7.4.2.1.4 | ScalarcmcIIILastChangeVars | read-only | current | Timestamp of last variable change according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.4.2.1.5 | ScalarcmcIIIVarByQualityHide | read-write | current | Hide entries in cmcIIIVarByQualityTable to reduce table size. |
| 1.3.6.1.4.1.2606.7.4.2.1.6 | ScalarcmcIIIDynUpdateRate | read-write | current | Update rate in seconds to add/remove entries from cmcIIIVarIntDynTable and cmcIIIVarStrDynTable. Note: cmcIIIDynUpdateHistory (>0) has to be at least twice cmc… |
| 1.3.6.1.4.1.2606.7.4.2.1.7 | ScalarcmcIIIDynUpdateHistory | read-write | current | History range in seconds to restrict data view in cmcIIIVarIntDynTable and cmcIIIVarStrDynTable. The value 0 will disable the history range restriction complet… |
| 1.3.6.1.4.1.2606.7.4.2.2 | TablecmcIIIVarTable | not-accessible | current | Headline of variable table. |
| 1.3.6.1.4.1.2606.7.4.2.2.1 | RowcmcIIIVarEntry | not-accessible | current | Entries of variable table. |
| 1.3.6.1.4.1.2606.7.4.2.2.1.1 | ColumncmcIIIVarDeviceIndex | not-accessible | current | Index for the device. Its value ranges between 1 and the value of cmcIIINumberOfDevs. |
| 1.3.6.1.4.1.2606.7.4.2.2.1.2 | ColumncmcIIIVarIndex | not-accessible | current | Index for the list of value entries. Its value ranges between 1 and the value of cmcIIINumberOfVars. |
| 1.3.6.1.4.1.2606.7.4.2.2.1.3 | ColumncmcIIIVarName | read-only | current | Clear name of variable. |
| 1.3.6.1.4.1.2606.7.4.2.2.1.4 | ColumncmcIIIVarType | read-only | current | Type of variable. |
| 1.3.6.1.4.1.2606.7.4.2.2.1.5 | ColumncmcIIIVarUnit | read-only | current | Unit of variable e. g. degree C. |
| 1.3.6.1.4.1.2606.7.4.2.2.1.6 | ColumncmcIIIVarDataType | read-only | current | Datatype of variable. |
| 1.3.6.1.4.1.2606.7.4.2.2.1.7 | ColumncmcIIIVarScale | read-only | current | Scaling factor of variable value, e. g. -100 -> value has to be divided by 100 +100 -> value has to be multiplied by 100. |
| 1.3.6.1.4.1.2606.7.4.2.2.1.8 | ColumncmcIIIVarConstraints | read-only | current | Constraints of value, e. g. [-_ a-zA-Z0-9]+ (if VariableDatatype is 'string'). |
| 1.3.6.1.4.1.2606.7.4.2.2.1.9 | ColumncmcIIIVarSteps | read-only | current | Steps of variable value (resolution). |
| 1.3.6.1.4.1.2606.7.4.2.2.1.10 | ColumncmcIIIVarValueStr | read-write | current | Value as string, including sign (+/-) and unit (degree C). |
| 1.3.6.1.4.1.2606.7.4.2.2.1.11 | ColumncmcIIIVarValueInt | read-write | current | Value as integer. |
| 1.3.6.1.4.1.2606.7.4.2.2.1.12 | ColumncmcIIIVarLastChange | read-only | current | Timestamp of last update or change according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.4.2.2.1.13 | ColumncmcIIIVarAccess | read-only | current | Access for value. |
| 1.3.6.1.4.1.2606.7.4.2.2.1.14 | ColumncmcIIIVarQuality | read-only | current | Quality of variable. |
| 1.3.6.1.4.1.2606.7.4.2.2.1.15 | ColumncmcIIIVarEntPhysicalIndex | read-only | current | Corresponding entPhysicalIndex of this variable. 0 if none exists. |
| 1.3.6.1.4.1.2606.7.4.2.3 | TablecmcIIIVarByTypeTable | not-accessible | current | Headline of variable by type table. |
| 1.3.6.1.4.1.2606.7.4.2.3.1 | RowcmcIIIVarByTypeEntry | not-accessible | current | Entries of variable by type table. |
| 1.3.6.1.4.1.2606.7.4.2.3.1.1 | ColumncmcIIIVarByTypeType | not-accessible | current | Type of variable. |
| 1.3.6.1.4.1.2606.7.4.2.3.1.2 | ColumncmcIIIVarByTypeDeviceIndex | not-accessible | current | Index for the device. Its value ranges between 1 and the value of cmcIIINumberOfDevs. |
| 1.3.6.1.4.1.2606.7.4.2.3.1.3 | ColumncmcIIIVarByTypeIndex | not-accessible | current | Index for the list of value entries. Its value ranges between 1 and the value of cmcIIINumberOfVars. |
| 1.3.6.1.4.1.2606.7.4.2.3.1.4 | ColumncmcIIIVarByTypeValueStr | read-only | current | Value as string, including sign (+/-) and unit (degree C). |
| 1.3.6.1.4.1.2606.7.4.2.3.1.5 | ColumncmcIIIVarByTypeValueInt | read-only | current | Value as integer. |
| 1.3.6.1.4.1.2606.7.4.2.3.1.6 | ColumncmcIIIVarByTypeLastChange | read-only | current | Timestamp of last update or change according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.4.2.4 | TablecmcIIIVarByQualityTable | not-accessible | current | Headline of variable by quality table. |
| 1.3.6.1.4.1.2606.7.4.2.4.1 | RowcmcIIIVarByQualityEntry | not-accessible | current | Entries of variable by quality table. The view of this table may be reduced using the bits of cmcIIIVarByQualityHide. |
| 1.3.6.1.4.1.2606.7.4.2.4.1.1 | ColumncmcIIIVarByQualityQuality | not-accessible | current | Quality of variable. |
| 1.3.6.1.4.1.2606.7.4.2.4.1.2 | ColumncmcIIIVarByQualityDeviceIndex | not-accessible | current | Index for the device. Its value ranges between 1 and the value of cmcIIINumberOfDevs. |
| 1.3.6.1.4.1.2606.7.4.2.4.1.3 | ColumncmcIIIVarByQualityIndex | not-accessible | current | Index for the list of value entries. Its value ranges between 1 and the value of cmcIIINumberOfVars. |
| 1.3.6.1.4.1.2606.7.4.2.4.1.4 | ColumncmcIIIVarByQualityValueStr | read-only | current | Value as string, including sign (+/-) and unit (degree C). |
| 1.3.6.1.4.1.2606.7.4.2.4.1.5 | ColumncmcIIIVarByQualityValueInt | read-only | current | Value as integer. |
| 1.3.6.1.4.1.2606.7.4.2.4.1.6 | ColumncmcIIIVarByQualityLastChange | read-only | current | Timestamp of last update or change according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.4.2.5 | TablecmcIIIVarIntDynTable | not-accessible | current | Headline of dynamically changed variable table of cmcIIIVarDatatype int(2) or enum(4). This table is updated each cmcIIIVarDynUpdateRate seconds only. This tab… |
| 1.3.6.1.4.1.2606.7.4.2.5.1 | RowcmcIIIVarIntDynEntry | not-accessible | current | Entries of dynamically changed table. |
| 1.3.6.1.4.1.2606.7.4.2.5.1.1 | ColumncmcIIIVarIntDynDeviceIndex | not-accessible | current | Index for the device. Its value ranges between 1 and the value of cmcIIINumberOfDevs. |
| 1.3.6.1.4.1.2606.7.4.2.5.1.2 | ColumncmcIIIVarIntDynIndex | not-accessible | current | Index for the list of value entries. Its value ranges between 1 and the value of cmcIIINumberOfVars. |
| 1.3.6.1.4.1.2606.7.4.2.5.1.3 | ColumncmcIIIVarIntDynLastChange | not-accessible | current | Timestamp of last update or change according to operating time cmcIIIUnitUpTime. Entries may be restricted by cmcIIIDynUpdateHistory. |
| 1.3.6.1.4.1.2606.7.4.2.5.1.4 | ColumncmcIIIVarIntDynValue | read-only | current | Value as integer. |
| 1.3.6.1.4.1.2606.7.4.2.6 | TablecmcIIIVarStrDynTable | not-accessible | current | Headline of dynamically changed variable table of cmcIIIVarDataType string(3). This table is updated each cmcIIIVarDynUpdateRate seconds only. This table has v… |
| 1.3.6.1.4.1.2606.7.4.2.6.1 | RowcmcIIIVarStrDynEntry | not-accessible | current | Entries of dynamically changed table. |
| 1.3.6.1.4.1.2606.7.4.2.6.1.1 | ColumncmcIIIVarStrDynDeviceIndex | not-accessible | current | Index for the device. Its value ranges between 1 and the value of cmcIIINumberOfDevs. |
| 1.3.6.1.4.1.2606.7.4.2.6.1.2 | ColumncmcIIIVarStrDynIndex | not-accessible | current | Index for the list of value entries. Its value ranges between 1 and the value of cmcIIINumberOfVars. |
| 1.3.6.1.4.1.2606.7.4.2.6.1.3 | ColumncmcIIIVarStrDynLastChange | not-accessible | current | Timestamp of last update or change according to operating time cmcIIIUnitUpTime. Entries may be restricted by cmcIIIDynUpdateHistory. |
| 1.3.6.1.4.1.2606.7.4.2.6.1.4 | ColumncmcIIIVarStrDynValue | read-only | current | Value as string. |
| 1.3.6.1.4.1.2606.7.4.3 | NodecmcIIIMsgs | |||
| 1.3.6.1.4.1.2606.7.4.3.1 | NodecmcIIIMsgInfo | |||
| 1.3.6.1.4.1.2606.7.4.3.1.1 | ScalarcmcIIIOverallMsgStatus | read-only | current | Overall message status of device. |
| 1.3.6.1.4.1.2606.7.4.3.1.2 | ScalarcmcIIINumberOfMsgs | read-only | current | Number of messages. All status vars available in cmcIIIVarTable will cause a message in cmcIIIMsgTable. |
| 1.3.6.1.4.1.2606.7.4.3.1.3 | ScalarcmcIIILastChangeOverallMsgStatus | read-only | current | Timestamp of last status change according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.4.3.1.4 | ScalarcmcIIILastChangeNumberOfMsgs | read-only | current | Timestamp of last message number change according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.4.3.1.5 | ScalarcmcIIILastChangeMsgSettings | read-only | current | Timestamp of last setting change according to operating time cmcIIIUnitUpTime This timestamp will be affected by SNMP settings only! |
| 1.3.6.1.4.1.2606.7.4.3.2 | TablecmcIIIMsgTable | not-accessible | current | Headline of message table. |
| 1.3.6.1.4.1.2606.7.4.3.2.1 | RowcmcIIIMsgEntry | not-accessible | current | Entries of message table. |
| 1.3.6.1.4.1.2606.7.4.3.2.1.1 | ColumncmcIIIMsgDeviceIndex | not-accessible | current | Index for the device. Its value ranges between 1 and the value of cmcIIINumberOfDevs. |
| 1.3.6.1.4.1.2606.7.4.3.2.1.2 | ColumncmcIIIMsgIndex | not-accessible | current | Index for the list of message entries. Its value ranges between 1 and the value of cmcIIINumberOfMsgs. |
| 1.3.6.1.4.1.2606.7.4.3.2.1.3 | ColumncmcIIIMsgText | read-only | current | Text for each message (entry in the table). |
| 1.3.6.1.4.1.2606.7.4.3.2.1.4 | ColumncmcIIIMsgStatus | read-only | current | Actual message status 1: not available 2: configuration has changed (sensor new, changed, lost) 3: error 4: OK 5: alarm, e.g. smoke, vibration... 6: warning of… |
| 1.3.6.1.4.1.2606.7.4.3.2.1.5 | ColumncmcIIIMsgRelay | read-write | current | Setup of Alarm relay for this message/alarm 1: no switching of alarm relay 2: switching of alarm relay. |
| 1.3.6.1.4.1.2606.7.4.3.2.1.6 | ColumncmcIIIMsgBeeper | read-write | current | Setup of Alarm beeper for this alarm 1: no audible alarm 2: audible alarm. |
| 1.3.6.1.4.1.2606.7.4.3.2.1.7 | ColumncmcIIIMsgTrap | read-write | current | Each bit is representing an entry of cmcIIITrapReceiverTable. If the corresponding cmcIIITrapReceiverStatus is enabled setting this bit enables sending message… |
| 1.3.6.1.4.1.2606.7.4.3.2.1.8 | ColumncmcIIIMsgSMTP | read-write | current | Each bit is representing an entry of cmcIIISmtpReceiverTable. If the corresponding cmcIIISmtpReceiverStatus is enabled setting this bit enables sending message… |
| 1.3.6.1.4.1.2606.7.4.3.2.1.9 | ColumncmcIIIMsgSMS | read-write | current | Each bit is representing an entry of cmcIIISmsReceiverTable. If the corresponding cmcIIISmsReceiverStatus is enabled setting this bit enables sending messages … |
| 1.3.6.1.4.1.2606.7.4.3.2.1.10 | ColumncmcIIIMsgQuit | read-write | current | Reset of this alarm 1: auto 2: manual, alarm needs confirmation, e. g. with 'C' key. |
| 1.3.6.1.4.1.2606.7.4.3.2.1.11 | ColumncmcIIIMsgDelay | read-write | current | Delay of alarm condition. |
| 1.3.6.1.4.1.2606.7.4.3.2.1.12 | ColumncmcIIIMsgSchedAlarmOff | read-write | current | Alarm condition disabled by scheduler. |
| 1.3.6.1.4.1.2606.7.4.3.2.1.13 | ColumncmcIIIMsgQuality | read-only | current | Quality of variable. |
| 1.3.6.1.4.1.2606.7.4.3.2.1.14 | ColumncmcIIIMsgVarIdx | read-only | current | Index of variable 'Status' in variable table generating this message. |
| 1.3.6.1.4.1.2606.7.4.3.2.1.15 | ColumncmcIIIMsgVarValueIdx | read-write | current | Index of variable 'Value' in the variable table. |
| 1.3.6.1.4.1.2606.7.4.3.2.1.16 | ColumncmcIIIMsgStatusText | read-only | current | Message status text. |
| 1.3.6.1.4.1.2606.7.4.4 | NodecmcIIIDrcs | |||
| 1.3.6.1.4.1.2606.7.4.4.1 | NodecmcIIIDrcInfo | |||
| 1.3.6.1.4.1.2606.7.4.4.1.1 | ScalarcmcIIIOverallDrcStatus | read-only | current | Overall DRC status of devices. |
| 1.3.6.1.4.1.2606.7.4.4.1.2 | ScalarcmcIIINumberOfDrcs | read-only | current | Number of DRCs available. |
| 1.3.6.1.4.1.2606.7.4.4.1.3 | ScalarcmcIIIOverallLastChangeDrcStatus | read-only | current | Overall timestamp of last DRC change according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.4.4.1.4 | ScalarcmcIIILastChangeNumberOfDrcs | read-only | current | Overall timestamp of last DRC number change according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.4.4.1.5 | ScalarcmcIIIOverallDrcUtilization | read-only | current | Percentage of occupied RUs. |
| 1.3.6.1.4.1.2606.7.4.4.1.6 | ScalarcmcIIIOverallDrcPower | read-only | current | Total Power in Watts, calculated from all cmcIIITotalDrcPower -values. |
| 1.3.6.1.4.1.2606.7.4.4.2 | TablecmcIIIDrcTable | not-accessible | current | Headline of DRC table. |
| 1.3.6.1.4.1.2606.7.4.4.2.1 | RowcmcIIIDrcEntry | not-accessible | current | Entries of DRC table. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.1 | ColumncmcIIIDrcIndex | not-accessible | current | Index for the DRC. Its value ranges between 1 and the value of cmcIIINumberOfDrcs. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.2 | ColumncmcIIIDrcStatus | read-only | current | DRC status of device. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.3 | ColumncmcIIILastChangeDrcStatus | read-only | current | Timestamp of last DRC change according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.4 | ColumncmcIIIDrcUnitName | read-write | current | Unit of Installation of DRC. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.5 | ColumncmcIIIDrcLocation | read-write | current | Location of Installation of DRC. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.6 | ColumncmcIIIDrcBuilding | read-write | current | Building of Installation of DRC. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.7 | ColumncmcIIIDrcLevel | read-write | current | Level of Installation of DRC. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.8 | ColumncmcIIIDrcRoom | read-write | current | Room of Installation of DRC. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.9 | ColumncmcIIIDrcRow | read-write | current | Row of Installation of DRC. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.10 | ColumncmcIIIDrcRackNr | read-write | current | Rack number of Installation of DRC. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.11 | ColumncmcIIIDrcMfgDate | read-only | current | Manufacture date of DRC, format DD.MM.YYYY. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.12 | ColumncmcIIIDrcSerialNr | read-only | current | Serial number of DRC. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.13 | ColumncmcIIIDrcOpHours | read-only | current | Operational hours of DRC. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.14 | ColumncmcIIIDrcNumberOfRU | read-only | current | Number of RUs. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.15 | ColumncmcIIIDrcUtilization | read-only | current | Percentage of occupied RUs. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.16 | ColumncmcIIITotalDrcPower | read-only | current | Total Power in Watts, calculated from all cmcIIIDrcPower -values. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.17 | ColumncmcIIIDrcSwController | read-only | current | Software version of controller. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.18 | ColumncmcIIIDrcSwBootloader | read-only | current | Software version of controller bootloader. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.19 | ColumncmcIIIDrcFwController | read-only | current | Firmware version of controller. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.20 | ColumncmcIIIDrcSwAntenna | read-only | current | Software version of antenna module. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.21 | ColumncmcIIIDrcSwAntennaBL | read-only | current | Software version of antenna modul bootloader. |
| 1.3.6.1.4.1.2606.7.4.4.2.1.22 | ColumncmcIIIDrcCommand | read-write | current | Command (to) send to the DRC 1: no Quit command 2: Quit command 3: LED auto, LED will show status of TAG (detected, lost..) 4: LEDs of occupied RUs will be swi… |
| 1.3.6.1.4.1.2606.7.4.4.3 | TablecmcIIITagTable | not-accessible | current | Headline of DRC Tag table. |
| 1.3.6.1.4.1.2606.7.4.4.3.1 | RowcmcIIITagEntry | not-accessible | current | Entries of tag table. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.1 | ColumncmcIIITagDrcIndex | not-accessible | current | Index for the DRC. Its value ranges between 1 and the value of cmcIIINumberOfDrcs. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.2 | ColumncmcIIITagRuIndex | not-accessible | current | Index for the RU of this DRC. This is the RU for this tag. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.3 | ColumncmcIIITagStatus | read-only | current | Status of the unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.4 | ColumncmcIIITagUID | read-only | current | UID of the tag of the unit mounted at this position (RU). |
| 1.3.6.1.4.1.2606.7.4.4.3.1.5 | ColumncmcIIITagPosition | read-only | current | Tag position within this RU, 0,1 or 2. 0: topmost position 1: middle position 2: lowermost position. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.6 | ColumncmcIIITagUnitFormfactor | read-write | current | Formfactor of the chassis (number of RUs). |
| 1.3.6.1.4.1.2606.7.4.4.3.1.7 | ColumncmcIIITagOffset | read-write | current | Tag offset. Offset of the tag related to the topmost position (in one-third of a RU). |
| 1.3.6.1.4.1.2606.7.4.4.3.1.8 | ColumncmcIIITagRuPosition | read-only | current | Position (RU) of the chassis. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.9 | ColumncmcIIITagDeviceClass | read-write | current | Class of the device. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.10 | ColumncmcIIITagDescName | read-write | current | Description name of the unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.11 | ColumncmcIIITagManufacturer | read-write | current | Manufacturer of the unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.12 | ColumncmcIIITagType | read-write | current | Type Name of the unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.13 | ColumncmcIIITagSerialNumber | read-write | current | Serial number of the Unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.14 | ColumncmcIIITagVendor | read-write | current | Vendor of the unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.15 | ColumncmcIIITagMac1 | read-write | current | MAC address 1 of the Unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.16 | ColumncmcIIITagMac2 | read-write | current | MAC address 2 of the unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.17 | ColumncmcIIITagService | read-write | current | Vendor contact of the unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.18 | ColumncmcIIITagDeviceName | read-write | current | Name of Unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.19 | ColumncmcIIITagInventoryCode | read-write | current | Inventory code of the unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.20 | ColumncmcIIITagPower | read-write | current | Power in Watts of the unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.21 | ColumncmcIIITagCurrent | read-write | current | Current in Amperes*10 of the unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.22 | ColumncmcIIITagVoltage | read-write | current | Voltage in Volts of the unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.23 | ColumncmcIIITagLastService | read-write | current | Last service of the unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.24 | ColumncmcIIITagNextService | read-write | current | Next service of the Unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.25 | ColumncmcIIITagLastUpdate | read-write | current | Last update of the unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.26 | ColumncmcIIITagNextUpdate | read-write | current | Next update of the unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.27 | ColumncmcIIITagInitialStart | read-write | current | Initial start (YYYYMMDD) of the unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.28 | ColumncmcIIITagCustom | read-write | current | Custom field of the unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.29 | ColumncmcIIITagCommand | read-write | current | Command (to) send to the unit at this RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.30 | ColumncmcIIITagStart | read-only | current | Start position (bottom) of the chassis of this tag. The resolution is one-third of a RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.31 | ColumncmcIIITagEnd | read-only | current | End position (top) of the chassis of this tag. The resolution is one-third of a RU. |
| 1.3.6.1.4.1.2606.7.4.4.3.1.32 | ColumncmcIIITagAntennaMap | read-only | current | Tag position mapping to the antennas. The resolution is one-third of a RU, one RU has three antennas. Position 1 is at the bottom of the rack. This value range… |
| 1.3.6.1.4.1.2606.7.4.5 | NodecmcIIIFiles | |||
| 1.3.6.1.4.1.2606.7.4.5.1 | NodecmcIIIFileInfo | |||
| 1.3.6.1.4.1.2606.7.4.5.1.1 | ScalarcmcIIINumberOfFiles | read-only | current | Number of Files available. |
| 1.3.6.1.4.1.2606.7.4.5.1.2 | ScalarcmcIIILastChangeFiles | read-only | current | Overall timestamp of last file change according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.4.5.1.3 | ScalarcmcIIILastChangeNumberOfFiles | read-only | current | Overall timestamp of last file number change according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.4.5.2 | TablecmcIIIFileTable | not-accessible | current | Headline of file table. |
| 1.3.6.1.4.1.2606.7.4.5.2.1 | RowcmcIIIFileEntry | not-accessible | current | Entries of file table. |
| 1.3.6.1.4.1.2606.7.4.5.2.1.1 | ColumncmcIIIFileIndex | not-accessible | current | Index for the file. Its value ranges between 1 and the value of cmcIIINumberOfFiles. |
| 1.3.6.1.4.1.2606.7.4.5.2.1.2 | ColumncmcIIILastChangeFile | read-only | current | Timestamp of last file change according to operating time cmcIIIUnitUpTime. |
| 1.3.6.1.4.1.2606.7.4.5.2.1.3 | ColumncmcIIIFileSize | read-only | current | Size of the file in bytes. |
| 1.3.6.1.4.1.2606.7.4.5.2.1.4 | ColumncmcIIIFileChecksum | read-only | current | Checksum of the file. |
| 1.3.6.1.4.1.2606.7.4.5.2.1.5 | ColumncmcIIIFileName | read-only | current | Name of the file. |
| 1.3.6.1.4.1.2606.7.5 | NodecmcIIIControl | |||
| 1.3.6.1.4.1.2606.7.5.1 | ScalarcmcIIIQuitUnit | read-write | current | Command to quit (acknowledge) alarms of CMCIII unit. Setting to 'quit' (2) will have same result as pressing 'C' on CMCIII. Variable is automatically set back … |
| 1.3.6.1.4.1.2606.7.5.2 | ScalarcmcIIISmsQueue | read-write | current | Fast track to send a SMS message based on configuration of cmcIIISetupSMS. Message format: MessageText TabulatorAsSeparator ReceiverPhoneNumber e.g.: Hello Wor… |
| 1.3.6.1.4.1.2606.7.6 | NodecmcIIIConformance | |||
| 1.3.6.1.4.1.2606.7.6.1 | NodecmcIIIMibCompliances | |||
| 1.3.6.1.4.1.2606.7.6.1.1 | CompliancecmcIIIMibCompliance | current | The core compliance statement for all cmcIII implementations. | |
| 1.3.6.1.4.1.2606.7.6.2 | NodecmcIIIMibGroups | |||
| 1.3.6.1.4.1.2606.7.6.2.1 | GroupcmcIIITrapGroup | current | Conformance group for objects contained in cmcIII notifications. | |
| 1.3.6.1.4.1.2606.7.6.2.2 | GroupcmcIIINotificationGroup | current | The cmcIII MIB notification group. | |
| 1.3.6.1.4.1.2606.7.6.2.3 | GroupcmcIIIInfoMibGroup | current | Conformance group for all cmcIII base information. | |
| 1.3.6.1.4.1.2606.7.6.2.4 | GroupcmcIIISetupMibGroup | current | Conformance group for default cmcIII setup operations. | |
| 1.3.6.1.4.1.2606.7.6.2.5 | GroupcmcIIIDeviceMibGroup | current | Conformance group for all cmcIII device information. | |
| 1.3.6.1.4.1.2606.7.6.2.6 | GroupcmcIIIControlMibGroup | current | Conformance group for all cmcIII control operations. | |
| 1.3.6.1.4.1.2606.7.6.2.7 | GroupcmcIIIRelayMibGroup | current | Conformance group for cmcIII relay and beeper operations. | |
| 1.3.6.1.4.1.2606.7.6.2.8 | GroupcmcIIISmsMibGroup | current | Conformance group for cmcIII SMS operations. | |
| 1.3.6.1.4.1.2606.7.6.2.9 | GroupcmcIIISmtpMibGroup | current | Conformance group for cmcIII SMTP operations. | |
| 1.3.6.1.4.1.2606.7.6.2.10 | GroupcmcIIISyslogMibGroup | current | Conformance group for cmcIII syslog operations. | |
| 1.3.6.1.4.1.2606.7.6.2.11 | GroupcmcIIITimerMibGroup | current | Conformance group for cmcIII timer operations. | |
| 1.3.6.1.4.1.2606.7.6.2.12 | GroupcmcIIILdapMibGroup | current | Conformance group for cmcIII LDAP operations. | |
| 1.3.6.1.4.1.2606.7.6.2.13 | GroupcmcIIINtpMibGroup | current | Conformance group for cmcIII NTP operations. | |
| 1.3.6.1.4.1.2606.7.6.2.14 | GroupcmcIIIShutdownMibGroup | current | Conformance group for cmcIII shutdown server operations. | |
| 1.3.6.1.4.1.2606.7.6.2.15 | GroupcmcIIIModbusMibGroup | current | Conformance group for cmcIII modbus operations. | |
| 1.3.6.1.4.1.2606.7.6.2.16 | GroupcmcIIIDrcMibGroup | current | Conformance group for cmcIII Drc operations. | |
| 1.3.6.1.4.1.2606.7.6.2.17 | GroupcmcIIIFileMibGroup | current | Conformance group for cmcIII files. | |
| 1.3.6.1.4.1.2606.7.6.2.18 | GroupcmcIIIRadiusMibGroup | current | Conformance group for cmcIII Radius operations. | |
| 1.3.6.1.4.1.2606.7.6.2.19 | GroupcmcIIIWebCamMibGroup | current | Conformance group for cmcIII WebCam operations. |