RPHY-NDF-NDR-MIB
44 objects
description
Imported Objects
| CISCO-SMI | ciscoMgmt |
| INET-ADDRESS-MIB | InetAddress |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.857 | IdentityrphyNdfNdrMIB | description | ||
| 1.3.6.1.4.1.9.9.857.0 | NoderphyNdfNdrMIBNotifs | |||
| 1.3.6.1.4.1.9.9.857.0.1 | NotificationrphyNdfNdrMIBEventName | current | Test Notifiation Type | |
| 1.3.6.1.4.1.9.9.857.1 | NoderphyNdfNdrMIBObjects | |||
| 1.3.6.1.4.1.9.9.857.1.1 | TabledocsRphyRpdDevNdfCfgTable | not-accessible | current | This table provides OOB NDF channel's status and configuration information, for example channel frequency, width, poweradjust, admin status etc. This table als… |
| 1.3.6.1.4.1.9.9.857.1.1.1 | RowdocsRphyRpdDevNdfCfgEntry | not-accessible | current | Each entry contains status and configuration information for a single NDF Channel. |
| 1.3.6.1.4.1.9.9.857.1.1.1.1 | ColumndocsRphyRpdDevNdfUniqueId | not-accessible | current | This key attribute specifies a globally unique 6-byte identifier for the RPD. By convention, an RPD SHOULD use the MAC address of the lowest numbered Ethernet … |
| 1.3.6.1.4.1.9.9.857.1.1.1.2 | ColumndocsRphyRpdDevNdfRfPort | not-accessible | current | This key attribute reports the RPD RF port number carrying this NDF channel. |
| 1.3.6.1.4.1.9.9.857.1.1.1.3 | ColumndocsRphyRpdDevNdfRfChannel | not-accessible | current | This key attribute reports the NDF channel number. |
| 1.3.6.1.4.1.9.9.857.1.1.1.4 | ColumndocsRphyRpdDevNdfEnable | read-write | current | This attribute indicates whether the NDF stream is enabled or disabled. Also, using this attribute NDF stream can be enabled or disabled. |
| 1.3.6.1.4.1.9.9.857.1.1.1.5 | ColumndocsRphyRpdDevNdfDstIPAddr | read-only | current | This attribute reports the Group IP address of the RPD multicast NDF stream. When this filed is 0.0.0.0 or 0::0 (::) then the NDF stream is a unicast NDF strea… |
| 1.3.6.1.4.1.9.9.857.1.1.1.6 | ColumndocsRphyRpdDevNdfSrcIPAddr | read-only | current | This attribute reports the IP address of the transmitter of the L2TP stream. |
| 1.3.6.1.4.1.9.9.857.1.1.1.7 | ColumndocsRphyRpdDevNdfSessionId | read-only | current | This attribute reports the L2TP session ID of the NDF stream. |
| 1.3.6.1.4.1.9.9.857.1.1.1.8 | ColumndocsRphyRpdDevNdfFrequency | read-only | current | This attribute reports the center frequency of the NDF channel. |
| 1.3.6.1.4.1.9.9.857.1.1.1.9 | ColumndocsRphyRpdDevNdfBandwidth | read-only | current | This attribute reports the bandwidth of the NDF channel. Channel widths supported for NDF are- Mode 0 : 80000Hz, Mode 1 : 160000Hz, Mode 2 : 320000Hz, Mode 3 :… |
| 1.3.6.1.4.1.9.9.857.1.1.1.10 | ColumndocsRphyRpdDevNdfPowerAdjust | read-only | current | This attribute specifies power level adjustment for the NDF channel relative to the base power level configured for the DS RF port. |
| 1.3.6.1.4.1.9.9.857.1.1.1.11 | ColumndocsRphyRpdDevNdfRfMute | read-only | current | This attribute reports the current state of the RF output of the NDF channel. When Rf-mute is set to TRUE, the output RF signal is off. Similarly, when Rf-mute… |
| 1.3.6.1.4.1.9.9.857.1.1.1.12 | ColumndocsRphyRpdDevNdfIsUnicast | read-only | current | This attribute indicates whether the NDF stream is unicast or multicast. When Group-IP filed is 0.0.0.0 or 0::0 (::) then the NDF stream is a unicast NDF strea… |
| 1.3.6.1.4.1.9.9.857.1.1.1.13 | ColumndocsRphyRpdDevNdfRpdStatus | read-only | current | This attribute reports the string describing the current status of the RPD i.e 'Online' or 'Offline'. For config modify to take effect, the RPD status shoud be… |
| 1.3.6.1.4.1.9.9.857.1.1.1.14 | ColumndocsRphyRpdDevNdfRpdInPktCount | read-only | current | This attribute reports the number of packets received by the RPD on a given NDF stream. RPD status should be 'Online' to get the actual input packets count. |
| 1.3.6.1.4.1.9.9.857.1.1.1.15 | ColumndocsRphyRpdDevNdfRpdOutPktCount | read-only | current | This attribute reports the number of packets transmitted by the RPD. RPD status should be 'Online' to get the actual output packets count. |
| 1.3.6.1.4.1.9.9.857.1.2 | TabledocsRphyRpdDevNdrCfgTable | not-accessible | current | This table provides OOB NDR channel's status and configuration information, for example channel frequency, width, poweradjust, admin status etc. This table als… |
| 1.3.6.1.4.1.9.9.857.1.2.1 | RowdocsRphyRpdDevNdrCfgEntry | not-accessible | current | Each entry contains status and configuration information for a single NDR Channel. |
| 1.3.6.1.4.1.9.9.857.1.2.1.1 | ColumndocsRphyRpdDevNdrUniqueId | not-accessible | current | This key attribute specifies a globally unique 6-byte identifier for the RPD. By convention, an RPD SHOULD use the MAC address of the lowest numbered Ethernet … |
| 1.3.6.1.4.1.9.9.857.1.2.1.2 | ColumndocsRphyRpdDevNdrRfPort | not-accessible | current | This key attribute reports the RPD RF port number |
| 1.3.6.1.4.1.9.9.857.1.2.1.3 | ColumndocsRphyRpdDevNdrRfChannel | not-accessible | current | This key attribute reports the NDR channel number. |
| 1.3.6.1.4.1.9.9.857.1.2.1.4 | ColumndocsRphyRpdDevNdrEnable | read-write | current | This attribute indicates whether the NDR stream is enabled or disabled. Also, using this attribute NDR stream can be enabled or disabled. |
| 1.3.6.1.4.1.9.9.857.1.2.1.5 | ColumndocsRphyRpdDevNdrDstIPAddr | read-only | current | This attribute reports the IP address of the receiver of the NDR L2TP stream. |
| 1.3.6.1.4.1.9.9.857.1.2.1.6 | ColumndocsRphyRpdDevNdrSrcIPAddr | read-only | current | This attribute reports the IP address of the RPD transmitting the L2TP stream. |
| 1.3.6.1.4.1.9.9.857.1.2.1.7 | ColumndocsRphyRpdDevNdrSessionId | read-only | current | This attribute reports the L2TP session ID of the NDR stream. |
| 1.3.6.1.4.1.9.9.857.1.2.1.8 | ColumndocsRphyRpdDevNdrFrequency | read-only | current | This attribute reports the center frequency of the NDR channel. |
| 1.3.6.1.4.1.9.9.857.1.2.1.9 | ColumndocsRphyRpdDevNdrBandwidth | read-only | current | This attribute reports the bandwidth of the NDR channel.Channel widths supported for NDR are- Mode 0 : 80000Hz, Mode 1 : 160000Hz, Mode 2 : 320000Hz, Mode 3 : … |
| 1.3.6.1.4.1.9.9.857.1.2.1.10 | ColumndocsRphyRpdDevNdrMtuSize | read-only | current | This attribute reports the Maximum Transmission Unit or maximum packet size for the L2TP stream. |
| 1.3.6.1.4.1.9.9.857.1.2.1.11 | ColumndocsRphyRpdDevNdrPhb | read-only | current | This attribute reports the DSCP QOS value configured for a L2TP packets. Default PHB is 0x0 means Best-Effort packet delivery. |
| 1.3.6.1.4.1.9.9.857.1.2.1.12 | ColumndocsRphyRpdDevNdrPowerAdjust | read-only | current | This attribute represents the desired target receive power level adjust for the selected NDR channel from the base target power reference level specified for t… |
| 1.3.6.1.4.1.9.9.857.1.2.1.13 | ColumndocsRphyRpdDevNdrRpdStatus | read-only | current | This attribute reports the string describing the current status of the RPD i.e 'Online' or 'Offline'. For config modify to take effect, the RPD status shoud be… |
| 1.3.6.1.4.1.9.9.857.1.2.1.14 | ColumndocsRphyRpdDevNdrRpdInPktCount | read-only | current | This attribute reports the number of packets received by the RPD on a given NDR stream. RPD status should be 'Online' to get the actual input packets count. |
| 1.3.6.1.4.1.9.9.857.1.2.1.15 | ColumndocsRphyRpdDevNdrRpdOutPktCount | read-only | current | This attribute reports the number of packets transmitted by the RPD. RPD status should be 'Online' to get the actual output packets count. |
| 1.3.6.1.4.1.9.9.857.2 | NoderphyNdfNdrMIBConform | |||
| 1.3.6.1.4.1.9.9.857.2.1 | NoderphyNdfNdrMIBCompliances | |||
| 1.3.6.1.4.1.9.9.857.2.1.1 | CompliancerphyNdfNdrMIBCompliance | current | This is a default module-compliance containing default object groups. | |
| 1.3.6.1.4.1.9.9.857.2.2 | NoderphyNdfNdrMIBGroups | |||
| 1.3.6.1.4.1.9.9.857.2.2.1 | GrouprphyNdfNdrMIBMainObjectGroup | current | The is a test group. | |
| 1.3.6.1.4.1.9.9.857.2.2.2 | GrouprphyNdfNdrMIBNotificationGroup | current | The is a test group. |