MIB Viewer

RTCPXR-MIB

149 objects
RTCP Extended Reports MIB Copyright (c) The Internet Society (2005) This version of the MIB module is part of RFC nnnn and is based on RFC3611.
Imported Objects
INET-ADDRESS-MIBInetAddress InetAddressType InetPortNumber
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Gauge32 Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TCRowPointer TEXTUAL-CONVENTION TimeStamp
OIDNameAccessStatusDescription
1.3.6.1.2.1.255IdentityrtcpXrMIBRTCP Extended Reports MIB Copyright (c) The Internet Society (2005) This version of the MIB module is part of RFC nnnn and is based on RFC3611.
1.3.6.1.2.1.255.1NodertcpXrMIBObjects
1.3.6.1.2.1.255.1.1TablertcpXrSessionIDTablenot-accessiblecurrentTable of information about RTP Sessions for which RTCP XR parameters and metrics are available.
1.3.6.1.2.1.255.1.1.1RowrtcpXrSessionIDEntrynot-accessiblecurrentAn entry in the table of call records. A row in this table is created for each RTP session endpoint participating.
1.3.6.1.2.1.255.1.1.1.1ColumnrtcpXrSessionIDIndexnot-accessiblecurrentIndex for this session within the Session ID table.
1.3.6.1.2.1.255.1.1.1.2ColumnrtcpXrSessionIDSessionIdentifierread-onlycurrentUnique identifier for this session. Where a billing record correlation identifer is not available for a particular call, another identifier such as SSRC can be…
1.3.6.1.2.1.255.1.1.1.3ColumnrtcpXrSessionIDCallStartTimeread-onlycurrentCall start time for this call. If the start time is not known then this represents the earliest known time associated with the call.
1.3.6.1.2.1.255.1.1.1.4ColumnrtcpXrSessionIDCallStopTimeread-onlycurrentCall stop time for this call. If the call is still active then this shall have the value 0. If the call is complete but the time is unknown then this shall hav…
1.3.6.1.2.1.255.1.1.1.5ColumnrtcpXrSessionIDSourceIPtyperead-onlycurrentSource IP address type for this session.
1.3.6.1.2.1.255.1.1.1.6ColumnrtcpXrSessionIDSourceIPaddressread-onlycurrentSource IP address for this session.
1.3.6.1.2.1.255.1.1.1.7ColumnrtcpXrSessionIDSourceRTPportread-onlycurrentSource UDP port for RTP. A value of 0 indicates an unknown port number.
1.3.6.1.2.1.255.1.1.1.8ColumnrtcpXrSessionIDSourceRTCPportread-onlycurrentSource UDP port for RTCP.A value of 0 indicates an unknown port number.
1.3.6.1.2.1.255.1.1.1.9ColumnrtcpXrSessionIDDestIPtyperead-onlycurrentDestination IP address type for this session.
1.3.6.1.2.1.255.1.1.1.10ColumnrtcpXrSessionIDDestIPaddressread-onlycurrentDestination IP address for this session.
1.3.6.1.2.1.255.1.1.1.11ColumnrtcpXrSessionIDDestRTPportread-onlycurrentDestination UDP port for RTP. A value of 0 indicates an unknown port number.
1.3.6.1.2.1.255.1.1.1.12ColumnrtcpXrSessionIDDestRTCPportread-onlycurrentDestination UDP port for RTCP.A value of 0 indicates an unknown port number.
1.3.6.1.2.1.255.1.1.1.13ColumnrtcpXrSessionIDSrceIdenTyperead-onlycurrentDefines the type of address in parameter rtcpXrSessionIDSourceIdentifier
1.3.6.1.2.1.255.1.1.1.14ColumnrtcpXrSessionIDSrceIdentifierread-onlycurrentAlternate identifier to the IP address. This can be E.164, DN, or URL.
1.3.6.1.2.1.255.1.1.1.15ColumnrtcpXrSessionIDDestIdenTyperead-onlycurrentDefines the type of address in parameter rtcpXrSessionIDDestIdentifier.
1.3.6.1.2.1.255.1.1.1.16ColumnrtcpXrSessionIDDestIdentifierread-onlycurrentAlternate identifier to the IP address. This can be E.164, DN, or URL.
1.3.6.1.2.1.255.1.1.1.17ColumnrtcpXrSessionIDMeasurePtread-onlycurrentPlace that these metrics were measured - this endpoint, remote endpoint (i.e. reported through XR), or midstream. If this MIB is supported in a midstream devic…
1.3.6.1.2.1.255.1.1.1.18ColumnrtcpXrSessionIDMeasurePtIDread-onlycurrentInformation describing the identity of the endpoint that measured the data in this row. If the data was measured locally then this would be the identity of thi…
1.3.6.1.2.1.255.1.1.1.19ColumnrtcpXrSessionIDReverseSessionread-onlycurrentA pointer to the corresponding entry in this table for the reverse direction of transmission. For example, if this row contained locally measured metrics for t…
1.3.6.1.2.1.255.1.1.1.20ColumnrtcpXrSessionIDAltMeasurePtread-onlycurrentA pointer to the corresponding entry in this table for alternate measurement point data. For example, if this MIB was located in a midstream devices and this r…
1.3.6.1.2.1.255.1.2TablertcpXrBaseParamTablenot-accessiblecurrentTable of basic parameters related to RTP sessions in the Session table.
1.3.6.1.2.1.255.1.2.1RowrtcpXrBaseParamEntrynot-accessiblecurrentAn entry in the table of basic parameters. A row in this table is created for each RTP session endpoint participating.
1.3.6.1.2.1.255.1.2.1.1ColumnrtcpXrBaseParamVocoderTyperead-onlycurrentVocoder type used on this call. The format used shall be ITU-T G.7xx, GSM FR, GSM EFR, GSM HR, AMR, AMR WB, iLBC or similar. For example 'ITU G.729A'.
1.3.6.1.2.1.255.1.2.1.2ColumnrtcpXrBaseParamVocoderRateread-onlycurrentVocoder rate in use at the time this data was captured expressed in bits per second. For example G.711 would have the rate 64000 and G.729 would have the rate …
1.3.6.1.2.1.255.1.2.1.3ColumnrtcpXrBaseParamFrameDurationread-onlycurrentCompanion information to vocoder type. This represents the duration of the time interval represented by a frame, which is generally equivalent to the nominal s…
1.3.6.1.2.1.255.1.2.1.4ColumnrtcpXrBaseParamSampleRateread-onlycurrentCompanion information to vocoder type. This represents the rate at which media was sampled (e.g. 8000 for narrowband voice, 16000 for wideband voice).
1.3.6.1.2.1.255.1.2.1.5ColumnrtcpXrBaseParamDurationMsread-onlycurrentCurrent duration of call in milliseconds if still active, duration of call in milliseconds if complete.
1.3.6.1.2.1.255.1.2.1.6ColumnrtcpXrBaseParamNetworkLossRateread-onlycurrentAverage rate of network packet loss.
1.3.6.1.2.1.255.1.2.1.7ColumnrtcpXrBaseParamAvgDiscardRateread-onlycurrentAverage rate of discards due to jitter.
1.3.6.1.2.1.255.1.2.1.8ColumnrtcpXrBaseParamBurstLossDensityread-onlycurrentDensity of loss and discarded packets during burst periods.
1.3.6.1.2.1.255.1.2.1.9ColumnrtcpXrBaseParamBurstLenMsread-onlycurrentAverage length of bursts in milliseconds.
1.3.6.1.2.1.255.1.2.1.10ColumnrtcpXrBaseParamGapLossDensityread-onlycurrentDensity of loss and discarded packets during gap periods.
1.3.6.1.2.1.255.1.2.1.11ColumnrtcpXrBaseParamGapLenMsread-onlycurrentAverage length of gaps in milliseconds.
1.3.6.1.2.1.255.1.2.1.12ColumnrtcpXrBaseParamAvgOWDelayread-onlycurrentAverage (symmetric) one way RTCP delay on call. A value of zero may indicate that this value has not yet been determined.
1.3.6.1.2.1.255.1.2.1.13ColumnrtcpXrBaseParamAvgEndSysDelayread-onlycurrentAverage end system delay on call. A value of zero may indicate that this value has not yet been determined.
1.3.6.1.2.1.255.1.2.1.14ColumnrtcpXrBaseParamPlcTyperead-onlycurrentDefines type of packet loss concealment used on this call.
1.3.6.1.2.1.255.1.2.1.15ColumnrtcpXrBaseParamJBuffAdaptModeread-onlycurrentDefines if jitter buffer is in fixed or adaptive mode.
1.3.6.1.2.1.255.1.2.1.16ColumnrtcpXrBaseParamJBuffAdaptRateread-onlycurrentEstimated adaptation rate of jitter buffer.
1.3.6.1.2.1.255.1.2.1.17ColumnrtcpXrBaseParamJBuffAverageDelayread-onlycurrentAverage size of jitter buffer in mS.
1.3.6.1.2.1.255.1.2.1.18ColumnrtcpXrBaseParamJBuffMaximumDelayread-onlycurrentMaximum delay through jitter buffer at current size in mS.
1.3.6.1.2.1.255.1.2.1.19ColumnrtcpXrBaseParamJBuffAbsMaxDelayread-onlycurrentAbsolute maximum size jitter buffer can reach in mS.
1.3.6.1.2.1.255.1.2.1.20ColumnrtcpXrBaseParamJitterLevelread-onlycurrentAverage jitter level measured according to RFC3550 and represented in terms of milliseconds.
1.3.6.1.2.1.255.1.3TablertcpXrCallQualityTablenot-accessiblecurrentTable of voice quality metrics. A row is created in this table for each row in the Session table.
1.3.6.1.2.1.255.1.3.1RowrtcpXrCallQualityEntrynot-accessiblecurrentAn entry in the table of voice quality metrics. A row in this table is created for each row in the Session table.
1.3.6.1.2.1.255.1.3.1.1ColumnrtcpXrCallQualityNoiseLeveldBmread-onlycurrentMeasured received silent period noise level in dBm. A value of 127 indicates that this parameter is not available. In midpoint applications this parameter may …
1.3.6.1.2.1.255.1.3.1.2ColumnrtcpXrCallQualitySignalLeveldBmread-onlycurrentMeasured received signal level during talkspurts in dBm. A value of 127 indicates that this parameter is not available. In midpoint applications this parameter…
1.3.6.1.2.1.255.1.3.1.3ColumnrtcpXrCallQualityLocalRERLdBread-onlycurrentResidual Echo Return Loss measured at this endpoint, or at the terminating endpoint of this RTP session. This relates to the echo level from the network beyond…
1.3.6.1.2.1.255.1.3.1.4ColumnrtcpXrCallQualityRemoteRERLdBread-onlycurrentResidual Echo Return Loss measured at originating endpoint of this RTP session (i.e. the remote endpoint if this MIB is implemented in an endpoint). Note that …
1.3.6.1.2.1.255.1.3.1.5ColumnrtcpXrCallQualityRCQread-onlycurrentConversational quality R factor for this call. This value SHOULD be calculated using ITU G.107 (The E Model) or extended versions thereof.
1.3.6.1.2.1.255.1.3.1.6ColumnrtcpXrCallQualityRLQread-onlycurrentListening quality R factor for this call. This value SHOULD be calculated using ITU G.107 (The E Model) or extended versions thereof.
1.3.6.1.2.1.255.1.3.1.7ColumnrtcpXrCallQualityExternalRCQread-onlycurrentExternal R factor for this call. This value SHOULD be calculated using ITU G.107 (The E Model) or extended versions thereof. The External R factor relates to t…
1.3.6.1.2.1.255.1.3.1.8ColumnrtcpXrCallQualityMOSCQread-onlycurrentEstimated conversational quality MOS for this call expressed in MOS x 10 (e.g. 41 = MOS of 4.1). This value MAY be calculated by converting the R-CQ value to a…
1.3.6.1.2.1.255.1.3.1.9ColumnrtcpXrCallQualityMOSLQread-onlycurrentEstimated listening quality MOS for this call expressed in MOS x 10 (e.g. 41 = MOS of 4.1). This value MAY be calculated by converting the R-CQ value to a MOS.
1.3.6.1.2.1.255.1.3.1.10ColumnrtcpXrCallQualityAlgorithmread-onlycurrentCall quality algorithm used to determine R factors and MOS scores. For example, 'ITU-T G.107' for the E model. If any localized parameter scaling is used (for …
1.3.6.1.2.1.255.1.4TablertcpXrHistoryTablenot-accessiblecurrentTable of aggregate measurement data for groups of RTP sessions. A group may be a flow or any other logical association of streams.
1.3.6.1.2.1.255.1.4.1RowrtcpXrHistoryEntrynot-accessiblecurrentAn entry in the table of call history records.
1.3.6.1.2.1.255.1.4.1.1ColumnrtcpXrHistoryIndexnot-accessiblecurrentIndex for this set of aggregate data.
1.3.6.1.2.1.255.1.4.1.2ColumnrtcpXrHistoryGroupNameread-onlycurrentName of this set of aggregate data. Examples may include a flow, an interface or some other logical grouping of RTP sessions.
1.3.6.1.2.1.255.1.4.1.3ColumnrtcpXrHistoryStartTimeread-onlycurrentTime at which this history was reset or started.
1.3.6.1.2.1.255.1.4.1.4ColumnrtcpXrHistoryStopTimeread-onlycurrentTime at which this history was stopped.
1.3.6.1.2.1.255.1.4.1.5ColumnrtcpXrHistoryNumOfSessionsread-onlycurrentNumber of calls included in this history.
1.3.6.1.2.1.255.1.4.1.6ColumnrtcpXrHistoryMinDurationMsread-onlycurrentMinimum duration of calls.
1.3.6.1.2.1.255.1.4.1.7ColumnrtcpXrHistoryMaxDurationMsread-onlycurrentMaximum duration of calls.
1.3.6.1.2.1.255.1.4.1.8ColumnrtcpXrHistoryAvgDurationMsread-onlycurrentAverage duration of calls.
1.3.6.1.2.1.255.1.4.1.9ColumnrtcpXrHistoryMaxNetworkLossRateread-onlycurrentMaximum loss rate per call.
1.3.6.1.2.1.255.1.4.1.10ColumnrtcpXrHistoryAvgNetworkLossRateread-onlycurrentAverage loss rate across calls.
1.3.6.1.2.1.255.1.4.1.11ColumnrtcpXrHistoryMaxDiscardRateread-onlycurrentMaximum discard rate per call.
1.3.6.1.2.1.255.1.4.1.12ColumnrtcpXrHistoryAvgDiscardRateread-onlycurrentAverage discard rate across calls.
1.3.6.1.2.1.255.1.4.1.13ColumnrtcpXrHistoryMaxBurstLossDensityread-onlycurrentMaximum density of bursts if loss/discard.
1.3.6.1.2.1.255.1.4.1.14ColumnrtcpXrHistoryAvgBurstLossDensityread-onlycurrentAverage density of bursts of loss/discard.
1.3.6.1.2.1.255.1.4.1.15ColumnrtcpXrHistoryMinBurstLenMsread-onlycurrentMinimum length of bursts.
1.3.6.1.2.1.255.1.4.1.16ColumnrtcpXrHistoryMaxBurstLenMsread-onlycurrentMaximum length of bursts.
1.3.6.1.2.1.255.1.4.1.17ColumnrtcpXrHistoryAvgBurstLenMsread-onlycurrentAverage length of bursts.
1.3.6.1.2.1.255.1.4.1.18ColumnrtcpXrHistoryMaxGapLossDensityread-onlycurrentMaximum loss/discard density in gaps.
1.3.6.1.2.1.255.1.4.1.19ColumnrtcpXrHistoryAvgGapLossDensityread-onlycurrentAverage loss/discard density in gaps.
1.3.6.1.2.1.255.1.4.1.20ColumnrtcpXrHistoryMinGapLenMsread-onlycurrentMinimum average per-call gap length.
1.3.6.1.2.1.255.1.4.1.21ColumnrtcpXrHistoryMaxGapLenMsread-onlycurrentMaximum average per-call gap length.
1.3.6.1.2.1.255.1.4.1.22ColumnrtcpXrHistoryAvgGapLenMsread-onlycurrentAverage per-call gap length.
1.3.6.1.2.1.255.1.4.1.23ColumnrtcpXrHistoryMinOneWayDelayread-onlycurrentMinimum one way delay.
1.3.6.1.2.1.255.1.4.1.24ColumnrtcpXrHistoryMaxOneWayDelayread-onlycurrentMaximum one way delay.
1.3.6.1.2.1.255.1.4.1.25ColumnrtcpXrHistoryAvgOneWayDelayread-onlycurrentAverage one way delay.
1.3.6.1.2.1.255.1.4.1.26ColumnrtcpXrHistoryMinEndSystemDelayread-onlycurrentMinimum end system delay.
1.3.6.1.2.1.255.1.4.1.27ColumnrtcpXrHistoryMaxEndSystemDelayread-onlycurrentMaximum end system delay.
1.3.6.1.2.1.255.1.4.1.28ColumnrtcpXrHistoryAvgEndSystemDelayread-onlycurrentAverage end system delay.
1.3.6.1.2.1.255.1.4.1.29ColumnrtcpXrHistoryMinJitterLevelread-onlycurrentMinimum jitter level.
1.3.6.1.2.1.255.1.4.1.30ColumnrtcpXrHistoryMaxJitterLevelread-onlycurrentMaximum jitter level.
1.3.6.1.2.1.255.1.4.1.31ColumnrtcpXrHistoryAvgJitterLevelread-onlycurrentAverage jitter level.
1.3.6.1.2.1.255.1.4.1.32ColumnrtcpXrHistoryMinNoiseLeveldBmread-onlycurrentMinimum noise level.
1.3.6.1.2.1.255.1.4.1.33ColumnrtcpXrHistoryMaxNoiseLeveldBmread-onlycurrentMaximum noise level.
1.3.6.1.2.1.255.1.4.1.34ColumnrtcpXrHistoryAvgNoiseLeveldBmread-onlycurrentAverage noise level.
1.3.6.1.2.1.255.1.4.1.35ColumnrtcpXrHistoryNoiseLevelCountread-onlycurrentNumber of sessions included in the Noise Level history values (as Noise Level is an optional parameter and may not be present on all calls.
1.3.6.1.2.1.255.1.4.1.36ColumnrtcpXrHistoryMinSignalLeveldBmread-onlycurrentMinimum signal level.
1.3.6.1.2.1.255.1.4.1.37ColumnrtcpXrHistoryMaxSignalLeveldBmread-onlycurrentMaximum signal level.
1.3.6.1.2.1.255.1.4.1.38ColumnrtcpXrHistoryAvgSignalLeveldBmread-onlycurrentAverage signal level.
1.3.6.1.2.1.255.1.4.1.39ColumnrtcpXrHistorySignalLevelCountread-onlycurrentNumber of sessions included in the Signal Level history values (as Signal Level is an optional parameter and may not be present on all calls.
1.3.6.1.2.1.255.1.4.1.40ColumnrtcpXrHistoryMinLocalRERLdBread-onlycurrentMinimum local Residual Echo Return Loss.
1.3.6.1.2.1.255.1.4.1.41ColumnrtcpXrHistoryMaxLocalRERLdBread-onlycurrentMaximum local Residual Echo Return Loss.
1.3.6.1.2.1.255.1.4.1.42ColumnrtcpXrHistoryAvgLocalRERLdBread-onlycurrentAverage local Residual Echo Return Loss.
1.3.6.1.2.1.255.1.4.1.43ColumnrtcpXrHistoryLocalRERLCountread-onlycurrentNumber of sessions included in the Local RERL history values (as Local RERL is an optional parameter and may not be present on all calls.
1.3.6.1.2.1.255.1.4.1.44ColumnrtcpXrHistoryMinRemoteRERLdBread-onlycurrentMinimum remote Residual Echo Return Loss.
1.3.6.1.2.1.255.1.4.1.45ColumnrtcpXrHistoryMaxRemoteRERLdBread-onlycurrentMinimum remote Residual Echo Return Loss.
1.3.6.1.2.1.255.1.4.1.46ColumnrtcpXrHistoryAvgRemoteRERLdBread-onlycurrentMinimum remote Residual Echo Return Loss.
1.3.6.1.2.1.255.1.4.1.47ColumnrtcpXrHistoryRemoteRERLCountread-onlycurrentNumber of sessions included in the Remote RERL history values (as Remote RERL is an optional parameter and may not be present on all calls.
1.3.6.1.2.1.255.1.4.1.48ColumnrtcpXrHistoryMinRCQread-onlycurrentMinimum conversational R factor.
1.3.6.1.2.1.255.1.4.1.49ColumnrtcpXrHistoryMaxRCQread-onlycurrentMaximum conversational R factor
1.3.6.1.2.1.255.1.4.1.50ColumnrtcpXrHistoryAvgRCQread-onlycurrentAverage conversational R factor
1.3.6.1.2.1.255.1.4.1.51ColumnrtcpXrHistoryRCQCountread-onlycurrentNumber of sessions included in the R CQ history values (as R CQ is an optional parameter and may not be present on all calls.
1.3.6.1.2.1.255.1.4.1.52ColumnrtcpXrHistoryMinRLQread-onlycurrentMinimum listening quality R factor.
1.3.6.1.2.1.255.1.4.1.53ColumnrtcpXrHistoryMaxRLQread-onlycurrentMaximum listening quality R factor.
1.3.6.1.2.1.255.1.4.1.54ColumnrtcpXrHistoryAvgRLQread-onlycurrentAverage listening quality R factor.
1.3.6.1.2.1.255.1.4.1.55ColumnrtcpXrHistoryRLQCountread-onlycurrentNumber of sessions included in the R LQ history values (as R LQ is an optional parameter and may not be present on all calls.
1.3.6.1.2.1.255.1.4.1.56ColumnrtcpXrHistoryMinMOSCQread-onlycurrentMinimum conversational quality MOS.
1.3.6.1.2.1.255.1.4.1.57ColumnrtcpXrHistoryMaxMOSCQread-onlycurrentMaximum conversational quality MOS.
1.3.6.1.2.1.255.1.4.1.58ColumnrtcpXrHistoryAvgMOSCQread-onlycurrentAverage conversational quality MOS.
1.3.6.1.2.1.255.1.4.1.59ColumnrtcpXrHistoryMOSCQCountread-onlycurrentNumber of sessions included in the MOS CQ history values (as MOS CQ is an optional parameter and may not be present on all calls.
1.3.6.1.2.1.255.1.4.1.60ColumnrtcpXrHistoryMinMOSLQread-onlycurrentMinimum listening quality MOS.
1.3.6.1.2.1.255.1.4.1.61ColumnrtcpXrHistoryMaxMOSLQread-onlycurrentMaximum listening quality MOS.
1.3.6.1.2.1.255.1.4.1.62ColumnrtcpXrHistoryAvgMOSLQread-onlycurrentAverage listening quality MOS.
1.3.6.1.2.1.255.1.4.1.63ColumnrtcpXrHistoryMOSLQCountread-onlycurrentNumber of sessions included in the MOS LQ history values (as MOS LQ is an optional parameter and may not be present on all calls.
1.3.6.1.2.1.255.1.4.1.64ColumnrtcpXrHistoryCQAlgorithmread-onlycurrentCall quality algorithm used - must be consistent for all calls in this history.
1.3.6.1.2.1.255.1.4.1.65ColumnrtcpXrHistoryResetread-writecurrentStatus of this row in the history table. Writing a value of 2 to this object MUST cause history updates to be stopped for this row. Writing a value of 3 to thi…
1.3.6.1.2.1.255.2NodertcpXrConformance
1.3.6.1.2.1.255.2.1NodertcpXrCompliances
1.3.6.1.2.1.255.2.1.1CompliancertcpXrFullMetricsCompliancecurrentDescribes the requirements for conformance to the rtcpXr MIB for VoIP devices that support basic reporting.
1.3.6.1.2.1.255.2.1.2CompliancertcpXrMetricsAlertsCompliancecurrentDescribes the requirements for conformance to the rtcpXr MIB for VoIP devices that support reporting and alerts.
1.3.6.1.2.1.255.2.1.3CompliancertcpXrMetricsHistoryCompliancecurrentDescribes the requirements for conformance to the rtcpXr MIB for VoIP devices that support reporting, call history and alerts.
1.3.6.1.2.1.255.2.1.4CompliancertcpXrMinimalCompliancecurrentDescribes the minimal requirements for conformance to the rtcpXr MIB - NOT RECOMMENDED.
1.3.6.1.2.1.255.2.2NodertcpXrGroups
1.3.6.1.2.1.255.2.2.1GrouprtcpXrSessionIDGroupcurrentSession ID objects used in rtcpXr VoIP Metrics MIB
1.3.6.1.2.1.255.2.2.2GrouprtcpXrBaseParamGroupcurrentObjects used in rtcpXr VoIP Metrics MIB
1.3.6.1.2.1.255.2.2.3GrouprtcpXrCallQualityGroupcurrentCall quality objects used in rtcpXr VoIP Metrics MIB
1.3.6.1.2.1.255.2.2.4GrouprtcpXrMIBHistoryGroupcurrentObjects used in rtcpXr VoIP History MIB
1.3.6.1.2.1.255.2.2.5GrouprtcpXrNotificationParmsGroupcurrentNotification parameters emitted by a rtcpXr endpoint.
1.3.6.1.2.1.255.2.2.6GrouprtcpXrNotificationsGroupcurrentNotifications emitted by a rtcpXr endpoint.
1.3.6.1.2.1.255.3NodertcpXrEvents
1.3.6.1.2.1.255.3.1NotificationrtcpXrVoipThresholdViolationcurrentNotification that voice quality has changed Sent immediately when the condition is detected.
1.3.6.1.2.1.255.3.2NodertcpXrEventParam
1.3.6.1.2.1.255.3.2.1ScalarrtcpXrVoipAlertTyperead-onlycurrentText description of the type of alert. Where possible, this parameter should be populated with the correct rtcpXrVoipEntry or rtcpXrVoipHistory description.
1.3.6.1.2.1.255.3.2.2ScalarrtcpXrVoipAlertInfoTyperead-onlycurrentIndicates the type of information returned in the rtcpXrVoipAlertInfo parameter.
1.3.6.1.2.1.255.3.2.3ScalarrtcpXrVoipAlertPointerread-onlycurrentPointer to the table of call session information to identify the specific call that triggered the alert.
1.3.6.1.2.1.255.3.2.4ScalarrtcpXrVoipAlertSeverityread-onlycurrentThe severity of the alert as defined in ITU-T X.733 and RFC3877.
Type Definitions
NameSyntaxStatusDescription
LeveldBInteger32 (-120..120|127)currentRepresents a signal level in decibels (dB).
PercentageUnsigned32 (0..100)currentPercentage expressed as a rounded integer.
RfactorUnsigned32 (0..120|127)currentCall or transmission quality expressed as an R factor in the range 0 to 120. A value of 127 shall be interpreted as NULL or unsupported.
ScaledMOSscoreInteger32 (10..50|127)currentCall or transmission quality expressed as a MOS score scaled by 10. MOS is typically represented as a 1.0 to 5.0 score with a single decimal place and hence in this representation as 10 to 50. A value of 127 shall be in…
MIB Viewer