RTU-MIB
454 objects
RTU3 vendor-defined MIB module
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress PhysAddress TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.20998 | Nodehoneywell | |||
| 1.3.6.1.4.1.20998.2 | Nodeacs | |||
| 1.3.6.1.4.1.20998.2.1 | Nodeees | |||
| 1.3.6.1.4.1.20998.2.1.1 | Nodeserg | |||
| 1.3.6.1.4.1.20998.2.1.1.1 | IdentityrtuMIB | RTU3 vendor-defined MIB module | ||
| 1.3.6.1.4.1.20998.2.1.1.1.0 | NodertuMeta | |||
| 1.3.6.1.4.1.20998.2.1.1.1.0.1 | ScalarrtuNotificationMessage | accessible-for-notify | current | Additional message included in RTU notifications. Message can include either human-readable text or M2M data, depending on notification type. |
| 1.3.6.1.4.1.20998.2.1.1.1.1 | NodertuObjects | |||
| 1.3.6.1.4.1.20998.2.1.1.1.1.1 | NodertuSystem | |||
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.1 | ScalarrtuSerialNumber | read-only | current | Holds the device serial number. This string uniquely identifies the hardware on which this agent is running (excluding external, pluggable devices like a plug-… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.2 | ScalarrtuSystemTitle | read-only | current | Holds the device DLMS/COSEM system title. The system title is not necessarily derived from the same source as the device's serial number, though can be used as… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.3 | ScalarrtuHostName | read-write | current | Device identifier used by various internet protocols. Changing the hostname is allowed, though restricted to valid DNS names. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.4 | ScalarrtuDeviceType | read-only | current | Holds the name of the hardware device on which this agent runs. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.5 | ScalarrtuHardwareVersion | read-only | current | Holds the hardware revision number. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.6 | ScalarrtuManufacturingDate | read-only | current | Holds the date and time at which this device was manufactured. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.7 | ScalarrtuFirmwareVersion | read-only | current | Holds the version number of the currently active firmware. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.8 | ScalarrtuFirmwareBuildTag | read-only | current | Firmware build tag. This identifier can be used to track a particular firmware version to the automated build environment that was used to build and assemble t… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.9 | ScalarrtuFirmwareDate | read-only | current | Holds the date and time of the last firmware upgrade. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.10 | ScalarrtuFirmwareLicense | read-only | current | Holds the firmware license which is currently active. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.11 | ScalarrtuFirmwareLicenseValidity | read-only | current | Holds the expiration date of the current active firmware license. In case no expiration is in place, this value is set to the epoch timestamp. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.12 | ScalarrtuOperationModes | read-only | current | Holds a list of operation modes of this device, separated by white spaces. Operation modes listed in this object are not necessarily enabled. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.13 | ScalarrtuActiveEnvironment | read-write | current | Holds the system environment which is currently in use. Changes to this value are applied after rebooting the device. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.14 | ScalarrtuRestartApplication | read-write | current | Write true(1) to restart the host application. Restarting the application reinitializes all application-layer processes excluding the maintenance shell; This a… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.15 | ScalarrtuRebootSystem | read-write | current | Write true(1) to reboot the device. Rebooting the device reinitializes all system and deamon processes, including kernel processes. This object always returns … |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.16 | TablertuSystemPropertiesTable | not-accessible | current | Table containing the system configuration properties. Only properties which deviate from the system default settings are included in this table. Depending on t… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.16.1 | RowrtuSystemPropertiesValuesEntry | not-accessible | current | System configuration property. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.16.1.1 | ColumnrtuSystemPropertyName | not-accessible | current | System property name |
| 1.3.6.1.4.1.20998.2.1.1.1.1.1.16.1.2 | ColumnrtuSystemPropertyValue | read-write | current | System property value. Setting this value to NULL resets the variable to the system default. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2 | NodertuMetrology | |||
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.1 | TablertuMetrologyInstantaneousValuesTable | not-accessible | current | Table containing the instantaneous metrology related values. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.1.1 | RowrtuMetrologyInstantaneousValuesEntry | not-accessible | current | Instantaneous metrology data for a single phase. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.1.1.1 | ColumnrtuMetrologyInstanteousValuesPhase | not-accessible | current | Phase index |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.1.1.2 | ColumnrtuMetrologyInstanteousValuesVoltage | read-only | current | Instantaneous voltage for given phase. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.1.1.3 | ColumnrtuMetrologyInstanteousValuesAngle | read-only | current | Instantaneous phase angle for given phase. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.1.1.4 | ColumnrtuMetrologyInstanteousValuesFrequency | read-only | current | Instantaneous frequency for given phase. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2 | NodertuMetrologyHistory | |||
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2.1 | ScalarrtuMetrologyProfileCapturing | read-write | current | Indicates if the system is capturing the metrology values at fixed intervals. Write true(1) to start capturing, false(0) to stop capturing. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2.2 | ScalarrtuMetrologyProfileCaptureInterval | read-write | current | Holds the periodic interval in seconds at which the metrology values are captured and stored. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2.3 | ScalarrtuMetrologyProfileBufferSize | read-write | current | Amount of metrology values currently stored. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2.4 | ScalarrtuMetrologyProfileBufferCapacity | read-write | current | Holds the captured buffer size (amount of entries retained). If this value is exceeded, the buffer is rotated. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2.5 | ScalarrtuMetrologyProfileClear | read-write | current | Write true(1) to clear the buffer of stored metrology values. This object always returns false(0) when fetched. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2.6 | ScalarrtuMetrologyProfileCapture | read-write | current | Write true(1) to force capturing and storing the current metrology values. This object always returns false(0) when fetched. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2.7 | TablertuMetrologyProfileValuesTable | not-accessible | current | Table containing the time series of the metrology related values (historical data). |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2.7.1 | RowrtuMetrologyProfileValuesEntry | not-accessible | current | Metrology time series data. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2.7.1.1 | ColumnrtuMetrologyProfileValuesTimeStamp | not-accessible | current | Holds the system time at which the metrology data was captured. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2.7.1.2 | ColumnrtuMetrologyProfileValuesReserveEnergy | read-only | current | Reserve energy level at the time of capturing. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2.7.1.3 | ColumnrtuMetrologyProfileValuesFrequency | read-only | current | Line frequency for the given phase at the time of capturing. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2.7.1.4 | ColumnrtuMetrologyProfileValuesVoltageL1 | read-only | current | Line voltage for the first phase at the time of capturing. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2.7.1.5 | ColumnrtuMetrologyProfileValuesVoltageL2 | read-only | current | Line voltage for the second phase at the time of capturing. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2.7.1.6 | ColumnrtuMetrologyProfileValuesVoltageL3 | read-only | current | Line voltage for the third phase at the time of capturing. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2.7.1.7 | ColumnrtuMetrologyProfileValuesAngleL1 | read-only | current | Line phase angle for the first phase at the time of capturing. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2.7.1.8 | ColumnrtuMetrologyProfileValuesAngleL2 | read-only | current | Line phase angle for the second phase at the time of capturing. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.2.7.1.9 | ColumnrtuMetrologyProfileValuesAngleL3 | read-only | current | Line phase angle for the third phase at the time of capturing. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.3 | NodertuMetrologyTemperatureHistory | |||
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.3.1 | ScalarrtuMetrologyTemperatureProfileCapturing | read-write | current | Indicates if the system is capturing the temperature values at fixed intervals. Write true(1) to start capturing, false(0) to stop capturing. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.3.2 | ScalarrtuMetrologyTemperatureProfileCaptureInterval | read-write | current | Holds the periodic interval in seconds at which the temperature values are captured and stored. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.3.3 | ScalarrtuMetrologyTemperatureProfileBufferSize | read-write | current | Amount of temperature values currently stored. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.3.4 | ScalarrtuMetrologyTemperatureProfileBufferCapacity | read-write | current | Holds the captured temperature buffer size (amount of entries retained). If this value is exceeded, the buffer is rotated. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.3.5 | ScalarrtuMetrologyTemperatureProfileClear | read-write | current | Write true(1) to clear the buffer of stored temperature values. This object always returns false(0) when fetched. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.3.6 | ScalarrtuMetrologyTemperatureProfileCapture | read-write | current | Write true(1) to force capturing and storing the current temperature values. This object always returns false(0) when fetched. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.3.7 | TablertuMetrologyTemperatureProfileTable | not-accessible | current | Table containing the time series of the system temperature measurement (historical data). |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.3.7.1 | RowrtuMetrologyTemperatureProfileEntry | not-accessible | current | Temperature time series data. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.3.7.1.1 | ColumnrtuMetrologyTemperatureValuesTimeStamp | not-accessible | current | Holds the system time at which the temperature data was captured. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.2.3.7.1.2 | ColumnrtuMetrologyTemperatureValuesAmbient | read-only | current | Device ambient temperature at the time of capturing. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.3 | NodertuPan | |||
| 1.3.6.1.4.1.20998.2.1.1.1.1.3.1 | ScalarrtuPanNodeCount | read-only | current | Amount of nodes currently registered on the RTU. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.3.2 | TablertuPanNodeTable | not-accessible | current | Table containing all nodes currently registered on the RTU. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.3.2.1 | RowrtuPanNodeTableEntry | not-accessible | current | Values pertaining to a single node on the PAN. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.3.2.1.1 | ColumnpanNodeDeviceIdentifier | not-accessible | current | Node link-layer identifier (e.g. EUI-64 in case of 802.15.4). |
| 1.3.6.1.4.1.20998.2.1.1.1.1.3.2.1.2 | ColumnpanNodeShortIdentifier | read-only | current | Node short identifier. Set to 0xffff if not available. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.3.2.1.3 | ColumnpanNodeServiceAddress | read-only | current | Node network layer identifier (e.g. IPv6 address in case of 6LowPAN). |
| 1.3.6.1.4.1.20998.2.1.1.1.1.3.2.1.4 | ColumnpanNodeDeviceSerial | read-only | current | Node serial number (device-dependent). |
| 1.3.6.1.4.1.20998.2.1.1.1.1.3.2.1.5 | ColumnpanNodeDeviceTimeZone | read-only | current | Time zone of the node. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.3.2.1.6 | ColumnpanNodeLinkState | read-only | current | Link state of the node on the network. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.4 | NodertuGateway | |||
| 1.3.6.1.4.1.20998.2.1.1.1.1.4.1 | ScalarrtuGatewayEndpointCount | read-only | current | Amount of termination points available on the gateway. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.4.2 | TablertuGatewayEndpointTable | not-accessible | current | Table containing all termination points available on the gateway. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.4.2.1 | RowrtuGatewayEndpointTableEntry | not-accessible | current | Values pertaining to a single gateway termination point. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.4.2.1.1 | ColumngatewayEndpointIdentifier | not-accessible | current | Link-layer identifier of the node to which the termination point relays the requests (e.g. EUI-64 in case of a 802.15.4 PAN). |
| 1.3.6.1.4.1.20998.2.1.1.1.1.4.2.1.2 | ColumngatewayEndpointType | read-only | current | Gateway termination point type. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.4.2.1.3 | ColumngatewayEndpointDlmsLogicalDeviceId | read-only | current | The DLMS service access point at which the gateway is terminated. In case this termination point does not offer DLMS services, this column is not present. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.4.2.1.4 | ColumngatewayEndpointActive | read-only | current | Indicates if the termination point is currently actively in use (i.e. has an open association). In case the termination point is stateless, this value is alway… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5 | NodertuDataConcentrator | |||
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.1 | ScalarrtuDataConcentratorClientTypeCount | read-only | current | Amount of client connection types defined in the data concentrator. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.2 | TablertuDataConcentratorClientTypeTable | not-accessible | current | Table containing all client connection types defined in the data concentrator. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.2.1 | RowrtuDataConcentratorClientTypeTableEntry | not-accessible | current | Values pertaining to a client connection type. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.2.1.1 | ColumnclientTypeIdentifier | not-accessible | current | Client connection type identifier. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.2.1.2 | ColumnclientTypeDlmsIdentifier | read-only | current | DLMS WPDU identifier used by this client connection type. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.2.1.3 | ColumnclientTypeDlmsSecurityLevel | read-only | current | DLMS security level used for this client connection type. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.2.1.4 | ColumnclientTypeDlmsSecurityPolicy | read-only | current | DLMS security policy used by this client connection type. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.2.1.5 | ColumnclientTypeDlmsSecuritySuite | read-only | current | DLMS security suite used by this client connection type. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.3 | ScalarrtuDataConcentratorDeviceTypeCount | read-only | current | Amount of device tyeps in the data concentrator. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.4 | TablertuDataConcentratorDeviceTypeTable | not-accessible | current | Table containing all device types define in the data concentrator. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.4.1 | RowrtuDataConcentratorDeviceTypeTableEntry | not-accessible | current | Values pertaining to a device type. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.4.1.1 | ColumndeviceTypeIdentifier | not-accessible | current | Unique device type identifier. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.4.1.2 | ColumndeviceTypeName | read-only | current | Human-readable name of the device type. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.4.1.3 | ColumndeviceTypeProtocol | read-only | current | Name of the protocol used for readout of a device type. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.4.1.4 | ColumndeviceTypeSerialNumberObis | read-only | current | OBIS code of the data IC on the device containing its serial number. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.4.1.5 | ColumndeviceTypeSerialNumberClientId | read-only | current | Client type which will be used for fetching the serial number of a device. This object refers to an existing row of the rtuDataConcentratorClientTypeTable. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.4.1.6 | ColumndeviceTypeClockSyncEnabled | read-only | current | Indicates if clock synchronization is enabled for the given device type. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.4.1.7 | ColumndeviceTypeClockSyncMinimumDeviation | read-only | current | Minimum clock deviation (in seconds) before clock synchronization will be attempted. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.4.1.8 | ColumndeviceTypeClockSyncMaximumDeviation | read-only | current | Maximum clock deviation (in seconds) before clock synchronization will no longer be attempted. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.5 | TablertuDataConcentratorProtocolConfigTable | not-accessible | current | Table containing all protocol configuration options specific to a device type. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.5.1 | RowrtuDataConcentratorProtocolConfigTableEntry | not-accessible | current | Protocol property entry for a specific device type. Overrides a specific communication related parameter for readout of a device type. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.5.1.2 | ColumnprotocolPropertyName | not-accessible | current | Name of the protocol property. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.5.1.3 | ColumnprotocolPropertyType | read-only | current | The type of the protocol property. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.5.1.4 | ColumnprotocolPropertyValue | read-only | current | The encoded value associated with the protocol property. The concrete encoding depends on the property type. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.6 | TablertuDataConcentratorSchedulableItemTable | not-accessible | current | Table containing all schedulable items linked to a specific device type. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.6.1 | RowrtuDataConcentratorSchedulableItemTableEntry | not-accessible | current | Item of device type scheduled for periodic readout. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.6.1.2 | ColumnschedulableItemIndex | not-accessible | current | Identifier for a setof schedulable items belonging to a single readout batch. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.6.1.3 | ColumnschedulableItemType | not-accessible | current | Type of item to be fetched from the device. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.6.1.4 | ColumnschedulableItemObis | not-accessible | current | OBIS code of the item to be fetched from the device. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.6.1.5 | ColumnschedulableItemScheduleId | read-only | current | Schedule identifier of the schedule to which this readout item is linked. Entries in this column refer to an index of the rtuDataConcentratorScheduleTable. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.6.1.6 | ColumnschedulableItemClientTypeId | read-only | current | Client type identifier of the client configuration to be used during readout of this item. Entries in this column refer to an index of the rtuDataConcentratorC… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.6.1.7 | ColumnschedulableItemLogicalDeviceId | read-only | current | DLMS SAP on the end device from which the item will be fetched. Usually this defaults to the management logical device (1). |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.6.1.8 | ColumnschedulableItemEntryCount | read-only | current | Amount of entries to be stored for this item. If set to 0xffffffff, the historic values of this item are stored until the local cache limit has been reached. R… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.7 | ScalarrtuDataConcentratorScheduleCount | read-only | current | Amount of schedules defined in the data concentrator. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.8 | TablertuDataConcentratorScheduleTable | not-accessible | current | Table containing all schedules defined in the data concentrator. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.8.1 | RowrtuDataConcentratorScheduleTableEntry | not-accessible | current | Values pertaining to a schedule. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.8.1.1 | ColumnscheduleIdentifier | not-accessible | current | Schedule identifier. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.8.1.2 | ColumnscheduleName | read-only | current | Human-readable schedule name. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.8.1.3 | ColumnscheduleSpecifier | read-only | current | Vixie-cron style periodicity expression. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.5.8.1.4 | ColumnscheduleTimeZone | read-only | current | Time zone in which the schedule is evaluated. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.6 | NodertuFileTransfer | |||
| 1.3.6.1.4.1.20998.2.1.1.1.1.6.1 | ScalarrtuFileTransferProtocol | read-write | current | Specifies the protocol to be used during a file transfer. Defaults to SCP. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.6.2 | ScalarrtuFileTransferServerAddressType | read-write | current | Specifies the type of address on which the file server can be reached. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.6.3 | ScalarrtuFileTransferServerAddress | read-write | current | The IP address or DNS name of the file server from which to fetch the files. This object is mandatory. In case a DNS name is used, make sure the device has a w… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.6.4 | ScalarrtuFileTransferServerPort | read-write | current | Specifies the TCP/UDP port at which the file server can be reached. If left at zero, the default value for the selected protocol will be used. In case of TFTP,… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.6.5 | ScalarrtuFileTransferServerPublicKey | read-write | current | Specifies the public keypart of the file server, used during the authentication phase of a file transfer. The concrete use of this value depends on the protoco… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.6.6 | ScalarrtuFileTransferUserName | read-write | current | Specifies the user name which should be presented by the client (this device) during the authentication phase of a file transfer. The concrete use of this valu… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.6.7 | ScalarrtuFileTransferUserPassword | read-write | current | Specifies the password which should be presented by the client (this device) during the authentication phase of a file transfer. The concrete use of this value… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.6.8 | ScalarrtuFileTransferNotificationOnCompletion | read-write | current | Specifies whether the rtuEventFileTransferCompleted and rtuEventFileTransferFailed traps should be dispatched on completion of a file transfer. Make sure to ha… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.6.9 | ScalarrtuFileTransferCopyState | read-only | current | Specifies the state of the file transfer currently taking place. This value remains at 0 when no file transfer has ever taken place since the last time the age… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.6.10 | ScalarrtuFileTransferTimeStarted | read-only | current | Specifies the time the rtuFileTransferCopyState last transitioned to 'running'. This value remains at 0 when no transfer has ever taken place since the last ti… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.6.11 | ScalarrtuFileTransferTimeCompleted | read-only | current | Specifies the time the rtuFileTransferCopyState changed from 'running' to 'successful' or 'failed'. This value remains at 0 when no transfer has taken place si… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.6.12 | ScalarrtuFileTransferFailCause | read-only | current | Specifies the reason the last run file transfer failed. This value remains at 0 when no transfer has taken place since the last time the agent was (re)initiali… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.6.13 | ScalarrtuFileTransferAbort | read-write | current | Writing true(1) to this object aborts the running file transfer (if any were present). An aborted file transfer is considered a failed transfer, and will be ha… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.7 | NodertuHealth | |||
| 1.3.6.1.4.1.20998.2.1.1.1.1.7.1 | ScalarrtuAmbientTemperature | read-only | current | Ambient temperature inside the RTU. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9 | NodertuWireless | |||
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1 | NodertuWirelessStatistics | |||
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.1 | ScalarrtuWirelessModemPresent | read-only | current | Indicates if a wireless modem is present in the device. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.2 | ScalarrtuWirelessModemReset | read-write | current | This object can be used to reset the modem. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.3 | ScalarrtuWirelessModemState | read-only | current | Indicates the current modem state. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.4 | ScalarrtuWirelessModemType | read-only | current | Vendor and product type of the modem present in the device. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.5 | ScalarrtuWirelessModemFirmware | read-only | current | Version revision indicator of the firmware running on the modem. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.6 | ScalarrtuWirelessModemImei | read-only | current | International Mobile Equipment Identifier (IMEI) of the modem present in the device. The IMEI number is used to identify the device to the wireless provider's … |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.7 | ScalarrtuWirelessSimPresent | read-only | current | Indicates if a SIM card is present and detected by the device. The SIM card stores the credentials required to authenticate on the wireless network. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.8 | ScalarrtuWirelessSimImsi | read-only | current | International Mobile Subscriber Identity (IMSI). This number is used to identify the subscriber to the wireless network provider and is unique worldwide. The f… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.9 | ScalarrtuWirelessSimMsisdn | read-only | current | MS-ISDN number of the SIM card. This number uniquely identifies a subscription to a wireless service provider, and can be used for inbound calls and SMS messag… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.10 | ScalarrtuWirelessSimIccid | read-only | current | Integrated Circuit Card Identification (ICCID). This number consists of 19 or 20 characters, and uniquely identifies the SIM internationally. This number is of… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.11 | ScalarrtuWirelessSimPinStatus | read-only | current | Status of the PIN locking mechanism on the SIM card. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.12 | ScalarrtuWirelessOperator | read-only | current | Network operator to which the modem is currently attached. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.13 | ScalarrtuWirelessAccessTechnology | read-only | current | Wireless access technology used to communicate with the operator's network. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.14 | ScalarrtuWirelessPdpType | read-only | current | PDP type. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.15 | ScalarrtuWirelessModemSignalEcio | read-only | current | EC/IO of the wireless signal in dB. This value is only available if the modem supports it. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.16 | ScalarrtuWirelessModemSignalSnr | read-only | current | Signal-To-Noise (SNR) as reported by the modem (in dB). This value is only available if the modem supports it. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.17 | ScalarrtuWirelessModemSignalSinr | read-only | current | Signal-to-interference-plus-noise ratio (SINR) as reported by the modem (in dB). This value is only available if the modem supports it. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.18 | ScalarrtuWirelessModemSignalRssi | read-only | current | Received-signal-strength-indicator (RSSI). This value measures the average total received power of all subcarriers in the serving cell (in dBM). This value is … |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.19 | ScalarrtuWirelessModemSignalRsrp | read-only | current | Reference-signal-received-power (RSRP). This value is defined as the linear average over the power contributions of the resource elements (subcarriers) that ca… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.20 | ScalarrtuWirelessModemSignalRsrq | read-only | current | Reference-signal-received-quality (RSRQ). This value is a C/I type of measurement and it indicates the quality of the received reference signal. See 3GPP TS 24… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.21 | ScalarrtuWirelessModemSignalBer | read-only | current | Bit-error-rate (BER) of the signal. Determines the amount of errors detected in the incoming data stream (percentage). |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.22 | ScalarrtuWirelessModemSignalQRxlevMin | read-only | current | Specifies the minimum required Rx level in the cell in dBm as defined in 3GPP TS 24.301 V13.4.0 (2016-01). Only available if the modem supports it. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.23 | ScalarrtuWirelessModemSignalT3402 | read-only | current | Timer in seconds, used on PLMN selection procedure and sent by the network to the modem. Refer to 3GPP TS 24.301 V13.4.0 (2016-01) for details. Only available … |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.24 | ScalarrtuWirelessModemSignalT3412 | read-only | current | Timer in seconds used to manage the periodic tracking area updating procedure and sent by the network to the modem. Refer to 3GPP TS 24.301 V13.4.0 (2016-01) f… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.25 | ScalarrtuWirelessModemCellId | read-only | current | Cell ID of the tower to which the modem is currently connected. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.26 | ScalarrtuWirelessModemLocationId | read-only | current | Two-byte location area code (LAC) of the cell to which the modem is connected. In the case of GSM networks or Tracking Area Code (TAC) in the case of UMTS, CDM… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.27 | ScalarrtuWirelessModemMcc | read-only | current | Mobile Country Code of the serving network, as defined in ITU-T E.212 (05.2008). |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.28 | ScalarrtuWirelessModemMnc | read-only | current | Mobile Network Code of the serving network, as defined in ITU-T E.212 (05.2008). |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.29 | ScalarrtuWirelessModemChannelId | read-only | current | Represents the absolute radio-frequency channel number (ARFCN or EARFCN for LTE network). |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.30 | ScalarrtuWirelessSuccessfulConnectionCount | read-only | current | Counter tracking the total amount of successful wireless connections established by this device. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.31 | ScalarrtuWirelessFailedConnectionCount | read-only | current | Counter tracking the total amount of failed wireless connection attempts by this device. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.32 | ScalarrtuWirelessLastSuccessfulConnection | read-only | current | Holds the date and time of the last successful connection established by this modem. Set to epoch if no successful connection has taken place before. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.33 | ScalarrtuWirelessLastSuccessfulConnectionImsi | read-only | current | Holds the IMSI of the last successful wireless connection made from this device. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.1.34 | ScalarrtuWirelessLastFailureReason | read-only | current | Holds the reason for the last failed connection attempt. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.2 | NodertuWirelessStateTransitionHistory | |||
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.2.1 | ScalarrtuWirelessStateTransitionBufferSize | read-only | current | Amount of state transitions retained in storage. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.2.2 | TablertuWirelessStateTransitionTable | not-accessible | current | Table keeping track of state transitions of the wireless modem. This table holds the last rtuWirelessStateTransitionBufferSize modem state transitions. This ta… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.2.2.1 | RowrtuWirelessStateTransitionEntry | not-accessible | current | Wireless modem state transition. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.2.2.1.1 | ColumnwirelessStateTransitionTimeStamp | not-accessible | current | Holds the system time at which the state transition occurred. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.2.2.1.2 | ColumnwirelessStateTransitionFromState | read-only | current | The origin modem state. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.2.2.1.3 | ColumnwirelessStateTransitionToState | read-only | current | The destination modem state. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.2.2.1.4 | ColumnwirelessStateTransitionReason | read-only | current | Optional reason for the state transition. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3 | NodertuWirelessGsmHistory | |||
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.1 | ScalarrtuWirelessGsmHistoryCapturing | read-write | current | Indicates if the system is capturing the GSM diagnostics values at fixed intervals. Write true(1) to start capturing, false(0) to stop capturing. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.2 | ScalarrtuWirelessGsmHistoryCaptureInterval | read-write | current | Holds the periodic interval in seconds at which the GSM diagnostics are captured and stored. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.3 | ScalarrtuWirelessGsmHistoryBufferSize | read-write | current | Amount of GSM diagnostic values currently stored. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.4 | ScalarrtuWirelessGsmHistoryBufferCapacity | read-write | current | Holds the captured GSM diagnostics buffer size (amount of entries retained). If this value is exceeded, the buffer is rotated. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.5 | ScalarrtuWirelessGsmHistoryClear | read-write | current | Write true(1) to clear the buffer of stored GSM diagnostics values. This object always returns false(0) when fetched. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.6 | ScalarrtuWirelessGsmHistoryCapture | read-write | current | Write true(1) to force capturing and storing the current GSM diagnostics values. This object always returns false(0) when fetched. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.7 | TablertuWirelessGsmHistoryTable | not-accessible | current | Table containing the time series of captured GSM diagnostics values (historical data). |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.7.1 | RowrtuWirelessGsmHistoryValuesEntry | not-accessible | current | Tuple of captured GSM diagnostic values. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.7.1.1 | ColumnrtuWirelessGsmHistoryTimeStamp | not-accessible | current | Holds the system time at which the GSM diagnostics have been captured. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.7.1.2 | ColumnrtuWirelessGsmHistoryStatus | read-only | current | Holds the modem state at the time the GSM diagnostics have been captured. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.7.1.3 | ColumnrtuWirelessGsmHistoryPsStatus | read-only | current | Hold the modem packet switched status at the time the GSM diagnostics have been captured. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.7.1.4 | ColumnrtuWirelessGsmHistoryCellId | read-only | current | Cell identifier of the tower to which the modem was connected at the time the GSM diagnostics have been captured. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.7.1.5 | ColumnrtuWirelessGsmHistoryLocationId | read-only | current | Location area code (LAC) at the time the GSM diagnostics have been captured. In the case of GSM networks or Tracking Area Code (TAC) in the case of UMTS, CDMA … |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.7.1.6 | ColumnrtuWirelessGsmHistorySignalQuality | read-only | current | Represents the signal quality at the time the GSM diagnostics have been captured: (0) -113 dBm or less, (1) -111 dBm, (2...30) -109...-53 dBm, (31) -51 or grea… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.7.1.7 | ColumnrtuWirelessGsmHistoryBer | read-only | current | Represents the bit error rate (BER) at the time the GSM diagnostics have been captured: (0...7) as RXQUAL_n values specified in ETSI GSM 05.08, 8.2.4 (99) not … |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.7.1.8 | ColumnrtuWirelessGsmHistoryMcc | read-only | current | Mobile Country Code of the network to which the modem was attached at the time the value was captured. The MCC values are defined in ITU-T Recommendation E.212 |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.7.1.9 | ColumnrtuWirelessGsmHistoryMnc | read-only | current | Mobile Network Code of the network to which the modem was attached at the time the value was captured. The MNC values can be requested from the GSM alliance. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.3.7.1.10 | ColumnrtuWirelessGsmHistoryChannelNumber | read-only | current | Represents the absolute radio-frequency channel number (ARFCN or eaRFCN for LTE network) at the time the GSM diagnostics have been captured. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.4 | NodertuWirelessLteHistory | |||
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.4.1 | ScalarrtuWirelessLteHistoryCapturing | read-write | current | Indicates if the system is capturing the LTE diagnostics at fixed intervals. Write true(1) to start capturing, false(0) to stop capturing. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.4.2 | ScalarrtuWirelessLteHistoryCaptureInterval | read-write | current | Holds the periodic interval in seconds at which the LTE diagnostics values are captured and stored. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.4.3 | ScalarrtuWirelessLteHistoryBufferSize | read-write | current | Amount of LTE diagnostic values currently stored. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.4.4 | ScalarrtuWirelessLteHistoryBufferCapacity | read-write | current | Holds the captured LTE diagnostics buffer size (amount of entries retained). If this value is exceeded, the buffer is rotated. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.4.5 | ScalarrtuWirelessLteHistoryClear | read-write | current | Write true(1) to clear the buffer of stored LTE diagnostics values. This object always returns false(0) when fetched. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.4.6 | ScalarrtuWirelessLteHistoryCapture | read-write | current | Write true(1) to force capturing and storing the current LTE diagnostic values. This object always returns false(0) when fetched. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.4.7 | TablertuWirelessLteHistoryTable | not-accessible | current | Table containing the time series of the captured LTE diagnostics values (historical data). |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.4.7.1 | RowrtuWirelessLteHistoryValuesEntry | not-accessible | current | Tuple of captured LTE diagnostic values. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.4.7.1.1 | ColumnrtuWirelessLteHistoryTimeStamp | not-accessible | current | Holds the system time at which the LTE diagnostics have been captured. |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.4.7.1.2 | ColumnrtuWirelessLteHistoryRsrq | read-only | current | Represents the signal quality as defined in 3GPP TS 24.301 V13.4.0 (2016-01) at the time the LTE diagnostics have been captured: (0) 19.5dB, (1) 19 dB, (2...31… |
| 1.3.6.1.4.1.20998.2.1.1.1.1.9.4.7.1.3 | ColumnrtuWirelessLteHistoryRsrp | read-only | current | Represents the signal level as defined in 3GPP TS 24.301 V13.4.0 (2016-01) at the time the LTE diagnostics have been captured: (0) 140dBm, (1) 139 dBm, (2... 9… |
| 1.3.6.1.4.1.20998.2.1.1.1.2 | NodertuNotifications | |||
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.0.1 | NotificationrtuEventMisc | current | Unspecified event (description included in event objects). | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.16.1 | NotificationrtuEventUnknownRegister | current | Event generated when an unknown DLMS register has been encountered. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.32.1 | NotificationrtuEventDlmsSessionAccepted | current | Event indicating a DLMS session has started. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.33.1 | NotificationrtuEventDlmsSessionFinished | current | Event indicating a DLMS session has finished. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.34.1 | NotificationrtuEventDlmsOther | current | Miscellaneous DLMS related event. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.35.1 | NotificationrtuEventDlmsUpstreamTest | current | Test event used for DLMS upstream connection and configuration assessing. The notification message contains a custom message entered by the user. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.48.1 | NotificationrtuEventModemWdgPPPDReset | current | An event generated when the wireless modem watchdog initiates a reset of the PPP connection after consecutive connection failures. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.49.1 | NotificationrtuEventModemWdgHWReset | current | An event generated when the wireless modem watchdog initiates a hardware reset of the modem after consecutive connection failures. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.50.1 | NotificationrtuEventModemWdgHWReboot | current | An event generated when the wireless modem watchdog initiates a hardware reboot of the modem after consecutive connection failures. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.51.1 | NotificationrtuEventModemConnected | current | Event generated when the wireless modem has connected to the network. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.52.1 | NotificationrtuEventModemDisconnected | current | Event generated when the wireless modem has been disconnected from the network. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.53.1 | NotificationrtuEventModemWakeUp | current | Event generated when the wireless modem has been enabled by wake-up call or SMS. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.54.1 | NotificationrtuEventProtocolPreliminaryTaskCompleted | current | Event generated after successful completion of a preliminary protocol task. The notification message contains a JSON structure with the result of preliminary p… | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.55.1 | NotificationrtuEventProtocolPreliminaryTaskFailed | current | Event generated after a failed preliminary protocol session. The notification message contains a JSON structure with the result of preliminary protocol action. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.56.1 | NotificationrtuEventProtocolConsecutiveFailure | current | Event generated when a protocol readout task for a certain meter has failed for consecutive runs. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.57.1 | NotificationrtuEventCheckDataConcentratorConfiguration | current | Event generated when the data concentrator configuration was found invalid during meter readout. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.64.1 | NotificationrtuEventWavenissBubbleUp | current | Wavenis bubble-up event. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.65.1 | NotificationrtuEventWavenisPairing | current | Wavenis device pairing event. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.66.1 | NotificationrtuEventWavenisUnpairing | current | Wavenis device unpairing event. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.67.1 | NotificationrtuEventWavenisDatabaseInconsistency | current | Wavenis database inconsistency event. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.68.1 | NotificationrtuEventWavenisSDPEvent | current | Wavenis SDP event. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.69.1 | NotificationrtuEventWavenisWaveCardReset | current | Event indicating Wavenis WaveCard has been reset. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.70.1 | NotificationrtuEventWavenisUnknownAlarm | current | Event indicating a wavenis alarm has been received from an unknown device. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.71.1 | NotificationrtuEventWavenisReplace | current | Wavenis replace event. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.72.1 | NotificationrtuEventWavenisDiscover | current | Wavenis discovery event. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.73.1 | NotificationrtuEventWavenisPathChange | current | Wavenis path change event. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.80.1 | NotificationrtuEventWavenisUnknownPairing | current | Wavenis pairing event from unknown device. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.128.1 | NotificationrtuEventPowerSwitchLow | current | Event indicating the device has switched to low-power mode. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.129.1 | NotificationrtuEventPowerSwitchFull | current | Event indicating the device has switched to full-power mode. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.130.1 | NotificationrtuEventPowerSwitchReduced | current | Event indicating the device has switched to reduced power mode. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.131.1 | NotificationrtuEventPowerMainsLost | current | Event indicating the mains power has been lost. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.132.1 | NotificationrtuEventPowerMainsRecovered | current | Event indicating the mains power has been recovered. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.133.1 | NotificationrtuEventPowerLastGasp | current | Event indicating the last-gasp (graceful shutdown) has been started. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.153.1 | NotificationrtuEventFirmwareUpgrade | current | Alert indicating the current firmware has been upgraded. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.160.1 | NotificationrtuEventSfskMeterDiscovery | current | An event indicating an S-FSK meter discovery has been initiated. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.161.1 | NotificationrtuEventSfskMeterAccepted | current | An event indicating an S-FSK meter has joined the PAN. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.162.1 | NotificationrtuEventSfskMeterRejected | current | An event indicating an S-FSK meter has been rejected from joining the PAN. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.163.1 | NotificationrtuEventSfskMeterAlarm | current | An S-FSK related meter alarm. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.164.1 | NotificationrtuEventSfskAlarmCondition | current | An S-FSK related alarm condition. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.165.1 | NotificationrtuEventSfskMultiMaster | current | An S-FSK multi-master alarm. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.166.1 | NotificationrtuEventSfskPlcEquipmentInStateNew | current | An event indicating the S-FSK stack has been restored to its factory defaults. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.167.1 | NotificationrtuEventSfskExtendedAlarmStatus | current | S-FSK extended alarm. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.168.1 | NotificationrtuEventSfskMeterDeleted | current | An event indicating an S-FSK meter has been removed from the meter list. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.169.1 | NotificationrtuEventSfskStackEvent | current | S-FSK related stack event. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.176.1 | NotificationrtuEventPlcPrimeRestarted | current | An event indicating the PLC PRIME interface has been restarted. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.177.1 | NotificationrtuEventPlcPrimeStackEvent | current | Internal PLC PRIME related event. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.178.1 | NotificationrtuEventPlcPrimeRegisterNode | current | An event indicating a node has joined the PLC PRIME PAN. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.179.1 | NotificationrtuEventPlcPrimeUnregisterNode | current | An event indicating a node has left the PLC PRIME PAN. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.192.1 | NotificationrtuEventPlcG3Restarted | current | An event indicating the PLC G3 network interface has been restarted. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.198.1 | NotificationrtuEventPlcG3UpperMACStopped | current | An event indicating the PLC G3 upper MAC software layer has been halted. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.199.1 | NotificationrtuEventPlcG3UpperMACStarted | current | An event indicating the PLC G3 upper MAC layer has been started. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.256.1 | NotificationrtuEventFirmwareModified | current | Alert indicating the current firmware configuration has been altered. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.257.1 | NotificationrtuEventCPUOverload | current | Alert indicating the current CPU usage is too high. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.259.1 | NotificationrtuEventDiskUsageTooHigh | current | Alert indicating the current disk usage is too high. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.260.1 | NotificationrtuEventPACEException | current | Alert indicating the PACE channel to the secure element is no longer available.. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.261.1 | NotificationrtuEventSSHLogin | current | Event generated when a user logs in to the SSH console. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.262.1 | NotificationrtuEventFactoryReset | current | Event generated when a factory reset has been initiated. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.265.1 | NotificationrtuEventUSBAdd | current | Event generated when a USB device has been inserted into the auxiliary USB port. The notification message contains the vendor and product ID of the device whic… | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.266.1 | NotificationrtuEventUSBRemove | current | Event generated when a USB device has been removed from the auxiliary USB port. The notification message is empty. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.267.1 | NotificationrtuEventFileTransferCompleted | current | Event generated when a file transfer initiated by the SNMP agent completed successfully. The notification message contains the name of the transfered file. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.268.1 | NotificationrtuEventFileTransferFailed | current | Event generated when a file transfer initiated by the SNMP agent failed. The notification message contains the reason for failure. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.269.1 | NotificationrtuEventScriptExecutionStarted | current | Event generated when a script defined on the system is invoked, either by a user action, or by a predefined schedule. The notification message contains the nam… | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.272.1 | NotificationrtuEventScriptExecutionScheduled | current | Event generated when a script defined on the system has been scheduled for later execution. The notification message contains the name of the script, and an ad… | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.273.1 | NotificationrtuEventScriptExecutionCancelled | current | Event generated when a script defined on the system has been cancelled after previously been scheduled for execution. The notification message contains the nam… | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.512.1 | NotificationrtuEventWebPortalLogin | current | Event indicating a user has logged in on the web portal. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.513.1 | NotificationrtuEventWebPortalAction | current | Event indicating an event has taken place on the web portal. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.514.1 | NotificationrtuEventWebPortalFailedLogin | current | Event indicating a web portal user has provided invalid credentials during authentication. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.515.1 | NotificationrtuEventWebPortalLockedUser | current | Event indicating a web portal user has been temporarily locked out because of repeated failed login attempts. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.516.1 | NotificationrtuEventWebPortalCSRF | current | Event indicating a Cross-Site Request Forgery attack has been detected on the web portal. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.768.1 | NotificationrtuEventMeterMulticastUpgradeStart | current | Event indicating a mass upgrade of the connected meters has been initiated. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.769.1 | NotificationrtuEventMeterMulticastUpgradeCompleted | current | Event indicating a mass upgrade of the connected meters has been completed. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.770.1 | NotificationrtuEventMeterMulticastUpgradeFailed | current | Event indicating a mass upgrade of the connected meters has failed. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.0.771.1 | NotificationrtuEventMeterMulticastUpgradeInfo | current | Event conveying additional information on a mass meter upgrade which is currently taking place. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.1.0.1 | NotificationrtuEventPowerDown | current | System power down event. Message contains reason. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.1.1.1 | NotificationrtuEventPowerDownDueToVoltageDrop | current | System power down event due to a voltage drop. Message contains additional reason information. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.1.2.1 | NotificationrtuEventPowerDownOnUserRequest | current | System power down initiated by the user. Message contains additional reason information. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.1.3.1 | NotificationrtuEventPowerDownDueToSoftwareFault | current | System power down event due to a software fault. Message contains additional reason information. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.1.4.1 | NotificationrtuEventPowerDownDueToHardwareFault | current | System power down event due to a hardware fault. Message contains additional reason information. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.1.5.1 | NotificationrtuEventPowerDownDueToNetworkInactivity | current | System power down event due to network inactivity. Message contains additional reason information. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.1.6.1 | NotificationrtuEventPowerDownDueToFirmwareUpgrade | current | System power down event due to a firmware upgrade. Message contains additional reason information. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.1.7.1 | NotificationrtuEventPowerDownDueToFirmwareRollback | current | System power down event due to a firmware rollback. Message contains additional reason information. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.1.8.1 | NotificationrtuEventPowerDownDueToDiskError | current | System power down event due to a disk error. Message contains additional reason information. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.1.9.1 | NotificationrtuEventPowerDownDueToConfigurationError | current | System power down event due to a configuration error. Message contains additional reason information. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.1.10.1 | NotificationrtuEventPowerDownDueToFactoryReset | current | System power down event due to a factory reset. Message contains additional reason information. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.1.11.1 | NotificationrtuEventPowerDownDueToTamperDetection | current | System power down event due to a tamper detection. Message contains additional reason information. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.1.12.1 | NotificationrtuEventPowerDownDueToTemperature | current | System power down event due to a temperature threshold being exceeded. Message contains additional reason information. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.1.256.1 | NotificationrtuEventPowerDownDueToSystemWatchdog | current | System power down event due to a trigger of the system watchdog. Message contains additional reason information. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.1.257.1 | NotificationrtuEventPowerDownDueToWirelessModemWatchdog | current | An event generated when the wireless modem watchdog initiates a reboot of the device after consecutive connection failures. Message contains additional reboot … | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.1.258.1 | NotificationrtuEventPowerDownDueToSecureElementWatchdog | current | System power down event due to a trigger of the secure element watchdog. Message contains additional reason information. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.1.259.1 | NotificationrtuEventPowerDownDueToExternalWatchdog | current | System power down event due to an external watchdog trigger. Message contains additional reason information. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.3.0.1 | NotificationrtuEventWatchdogReset | current | Watchdog reset event. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.6.0.1 | NotificationrtuEventSetClock | current | System clock has been altered. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.8.0.1 | NotificationrtuEventRAMMemoryError | current | An abnormal state in the RAM memory occured. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.8.258.1 | NotificationrtuEventRAMTooHigh | current | Alert indicating the current RAM usage is too high. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.9.0.1 | NotificationrtuEventProgramFlowError | current | An abnormal flow in the program code occured. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.10.0.1 | NotificationrtuEventRegisterOverflow | current | An overflow occured in one of the metrology registers. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.11.0.1 | NotificationrtuEventFatalError | current | A fatal error occured. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.12.0.1 | NotificationrtuEventDataCleared | current | All data has been cleared. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.13.0.1 | NotificationrtuEventHardwareError | current | An internal hardware error occured. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.14.0.1 | NotificationrtuEventMeterAlarm | current | A meter alarm has been triggered. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.15.0.1 | NotificationrtuEventROMError | current | An abnormal state in the ROM memory occured. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.16.0.1 | NotificationrtuEventMaximumDemandReset | current | An event generated when a meter resets the maximum demand registers. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.17.0.1 | NotificationrtuEventBillingAction | current | An event generated when a meter performs a billing action. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.18.0.1 | NotificationrtuEventAlarmStart | current | An event generated when the RTU enters an alarm state. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.19.0.1 | NotificationrtuEventAlarmStop | current | An event generated when the RTU leaves an alarm state. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.20.0.1 | NotificationrtuEventPhaseFailure | current | An event generated when power is lost to one of the lines supplying power. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.21.0.1 | NotificationrtuEventVoltageSag | current | An event generated when a voltage sag is detected on one of the lines supplying power. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.22.0.1 | NotificationrtuEventVoltageSwell | current | An event generated when a voltage swell is detected on one of the lines supplying power. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.23.0.1 | NotificationrtuEventTamper | current | An event generated when device tampering was detected. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.24.0.1 | NotificationrtuEventCoverOpened | current | An event generated when the device cover was removed. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25.0.1 | NotificationrtuEventTerminalOpened | current | An event generated when the device terminal cover was removed. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.26.0.1 | NotificationrtuEventReverseRun | current | ||
| 1.3.6.1.4.1.20998.2.1.1.1.2.27.0.1 | NotificationrtuEventLoadProfileCleared | current | An event generated when a load profile is cleared. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.28.0.1 | NotificationrtuEventLogCleared | current | An event generated when an event logbook is cleared. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.28.16.1 | NotificationrtuEventProtocolLogCleared | current | An event generated when the protocol logbook is cleared. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.29.0.1 | NotificationrtuEventDST | current | An event generated when DST is enabled/disabled. The included time stamp shows the time before the change. This event is not set in case of manual clock change… | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.30.0.1 | NotificationrtuEventClockInvalid | current | An event generated when the current system clock was found invalid, i.e. if the power reserve of the clock has been exhausted. The notification message contain… | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.30.1.1 | NotificationrtuEventMeterClockInvalid | current | An event generated when the system clock of a slave meter device was found invalid. This can occur during scheduled readout of a meter, f.i. if the meter's clo… | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.33.0.1 | NotificationrtuEventTOUActivated | current | Indicates that the passive TOU has been activated. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.34.0.1 | NotificationrtuEventErrorRegisterCleared | current | Indicates that the error register was cleared. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.35.0.1 | NotificationrtuEventAlarmRegisterCleared | current | Indicates that the alarm register was cleared. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.36.0.1 | NotificationrtuEventProgramMemoryError | current | Indicates a physical or a logical error in the program memory. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.37.0.1 | NotificationrtuEventNVMemoryError | current | Indicates a physical or a logical error in the non volatile memory. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.38.0.1 | NotificationrtuEventWatchdogError | current | Indicates the watchdog has reached an error condition. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.39.0.1 | NotificationrtuEventMeasurementSystemError | current | Indicates a logical or physical error in the measurement system. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.40.0.1 | NotificationrtuEventFirmwareReadyForActivation | current | Indicates that the new firmware has been successfully downloaded and verified, i.e. it is ready for activation | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.41.0.1 | NotificationrtuEventFirmwareActivated | current | Indicates that a new firmware has been activated. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.42.0.1 | NotificationrtuEventTerminalCoverClosed | current | Indicates that the terminal cover has been closed. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.43.0.1 | NotificationrtuEventStrongDCFieldDetected | current | Indicates that a strong magnetic DC field has been detected. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.44.0.1 | NotificationrtuEventStrongDCFieldGone | current | Indicates that the strong magnetic DC field has disappeared. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.45.0.1 | NotificationrtuEventCoverClosed | current | Indicates that the cover has been closed. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.46.0.1 | NotificationrtuEventNTimesWrongPassword | current | Indicates that a user tried to gain access with a wrong password (intrusion detection). | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.47.0.1 | NotificationrtuEventManualDisconnect | current | Indicates that the disconnector has been manually disconnected. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.48.0.1 | NotificationrtuEventManualConnect | current | Indicates that the disconnector has been manually connected. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.49.0.1 | NotificationrtuEventRemoteDisconnect | current | Indicates that the disconnector has been remotely disconnected. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.50.0.1 | NotificationrtuEventRemoteConnect | current | Indicates that the disconnector has been remotely connected. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.51.0.1 | NotificationrtuEventLocalDisconnect | current | Indicates that the disconnector has been locally disconnected (i.e. via the limiter). | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.52.0.1 | NotificationrtuEventLimiterThresholdExceeded | current | Indicates that the limiter threshold has been exceeded. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.53.0.1 | NotificationrtuEventLimiterThresholdOk | current | Indicates that the monitored value of the limiter dropped below the threshold. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.54.0.1 | NotificationrtuEventLimiterThresholdChanged | current | Indicates that the limiter threshold has been changed. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.55.0.1 | NotificationrtuEventComErrorMBus | current | Indicates a communication problem when reading the meter connected via M-Bus. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.56.0.1 | NotificationrtuEventComOkMBus | current | Indicates that the communication with the M-Bus meter is ok again. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.57.0.1 | NotificationrtuEventReplaceBatteryMBus | current | Indicates that the battery of the M-Bus meter must be exchanged due to the expected end of life time. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.58.0.1 | NotificationrtuEventFraudAttemptMBus | current | Indicates that a fraud attempt has been registered on the M-Bus meter. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.59.0.1 | NotificationrtuEventClockAdjustedMBus | current | Indicates that the clock has been adjusted on the M-Bus meter. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.60.0.1 | NotificationrtuEventManualDisconnectMBus | current | Indicates that the M-Bus meter disconnector has been manually disconnected. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.61.0.1 | NotificationrtuEventManualConnectionMBus | current | Indicates that the M-Bus meter disconnector has been manually connected. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.62.0.1 | NotificationrtuEventRemoteDisconnectionMBus | current | Indicates that the M-Bus disconnector has been remotely disconnected. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.63.0.1 | NotificationrtuEventRemoteConnectionMBus | current | Indicates that the M-Bus disconnector has been remotely connected. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.64.0.1 | NotificationrtuEventValveAlarmMBus | current | Indicates that a valve alarm has been registered on the M-Bus meter. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.9728.54.1 | NotificationrtuEventModemNewSIM | current | Event generated when a new SIM card is detected in the wireless modem. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.9728.55.1 | NotificationrtuEventModemNewEquipment | current | Event generated when a new wireless modem is detected. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.21248.0.1 | NotificationrtuEventSnmpOther | current | Generic SNMP agent related event. Message contains human-readable description. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.21248.1.1 | NotificationrtuEventSnmpInfo | current | SNMP agent info event. Message contains human-readable description. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.21248.2.1 | NotificationrtuEventSnmpUnsupportedVersion | current | Event indicating an SNMP request was received with an unsupported SNMP version. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.21248.3.1 | NotificationrtuEventSnmpUnsupportedSecModel | current | Event indicating an SNMP request was received with an unsupported security model. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.21248.4.1 | NotificationrtuEventSnmpInvalidUserName | current | Event indicating an SNMP request was received from an unknown securityName. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.21248.5.1 | NotificationrtuEventSnmpInalidEngineId | current | Event indicating an SNMP request was received destined to an unknown engine ID. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.0.1 | NotificationrtuEventSecurityAlert | current | General security alert. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1.1 | NotificationrtuEventWrapKeyError | current | Security alert involving a wrap key failure. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1024.1 | NotificationrtuEventDlmsAuthenticationLevelUpdated | current | Security alert indicating DLMS authentication level has been altered. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1025.1 | NotificationrtuEventDlmsSecurityPolicyUpdated | current | Security alert indicating DLMS security policy has been altered. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1026.1 | NotificationrtuEventDlmsSecuritySuiteUpdated | current | Security alert indicating DLMS security suite has been altered. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1027.1 | NotificationrtuEventDlmsKeysUpdated | current | Security alert indicating DLMS keys have been altered. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1028.1 | NotificationrtuEventDlmsAccessViolation | current | Security alert indicating unauthorized access to the DLMS server has been attempted. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1029.1 | NotificationrtuEventDlmsAuthenticationFailure | current | Security alert indicating a DLMS authentication handshake has failed. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1030.1 | NotificationrtuEventDlmsCipheringError | current | Security alert indicating a DLMS ciphering operation has failed. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1032.1 | NotificationrtuEventSNMPKeysUpdated | current | Security alert indicating SNMP keys have been altered. The notification message is empty. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1033.1 | NotificationrtuEventCRLUpdated | current | Security alert indicating the update of a CRL for a particular issuer. The notification message contains the X.500 principal representing the issuer of the CRL. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1034.1 | NotificationrtuEventCRLUpdateRejected | current | Security alert indicating the update of a CRL for a particular issuer has been rejected. The notification message contains a JSON structure containing the X.50… | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1035.1 | NotificationrtuEventKeyChangeRequest | current | Security alert indicating one or more keys or certificates need to be renewed. The notification message contains the name of the artifact which needs to be ren… | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1036.1 | NotificationrtuEventCRLRemoved | current | Security alert indicating the removal of a CRL for a particular issuer. The notification message contains the X.500 principal representing the issuer of the CR… | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1037.1 | NotificationrtuEvent8021XSuccess | current | Security alert indicating a user has successfully completed an IEEE 802.1X handshake on the local ethernet interface port. The message contains the subject of … | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1038.1 | NotificationrtuEvent8021XFailure | current | Security alert indicating a user has failed to complete an IEEE 802.1X handshake successfully on the local ethernet interface port. The message contains the su… | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1039.1 | NotificationrtuEventReplayAttack | current | Security alert indicating an incoming user request was rejected based on an invalid sequence counter. The message contains additional information on the reject… | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1040.1 | NotificationrtuEventCertificateImported | current | Security alert indicating a certificate stored in the device's trust store has been added. The message contains the X.500 name of the imported certificate. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1041.1 | NotificationrtuEventCertificateRemoved | current | Security alert indicating a certificate stored in the device's trust store has been removed. The message contains the X.500 name of the removed certificate. | |
| 1.3.6.1.4.1.20998.2.1.1.1.2.25344.1042.1 | NotificationrtuEventCertificateExpired | current | Security alert indicating a certificate stored in the device's trust store has expired. The message contains the X.500 name of the expired certificate. | |
| 1.3.6.1.4.1.20998.2.1.1.1.3 | NodertuObjectGroups | |||
| 1.3.6.1.4.1.20998.2.1.1.1.3.1 | GrouprtuSystemGroup | current | System related objects. | |
| 1.3.6.1.4.1.20998.2.1.1.1.3.2 | GrouprtuMetrologyGroup | current | Metrology related objects. | |
| 1.3.6.1.4.1.20998.2.1.1.1.3.3 | GrouprtuPanGroup | current | PAN related objects. | |
| 1.3.6.1.4.1.20998.2.1.1.1.3.4 | GrouprtuGatewayGroup | current | PAN gateway related objects. | |
| 1.3.6.1.4.1.20998.2.1.1.1.3.5 | GrouprtuDataConcentratorGroup | current | Objects pertaining to the data concentrator functionality of this device. | |
| 1.3.6.1.4.1.20998.2.1.1.1.3.6 | GrouprtuFileTransferGroup | current | File transfer configuration and state objects. These objects hold the active configuration which is to be used at any file transfer defined in the RTU-MIB. Thi… | |
| 1.3.6.1.4.1.20998.2.1.1.1.3.7 | GrouprtuHealthGroup | current | System health related statistics. | |
| 1.3.6.1.4.1.20998.2.1.1.1.3.9 | GrouprtuWirelessGroup | current | Wireless upstream related objects. | |
| 1.3.6.1.4.1.20998.2.1.1.1.4 | NodertuNotificationGroups | |||
| 1.3.6.1.4.1.20998.2.1.1.1.4.1 | GrouprtuNotificationMetaGroup | current | Notification related meta objects. | |
| 1.3.6.1.4.1.20998.2.1.1.1.4.2 | GrouprtuNotificationSystemGroup | current | RTU general and system notifications. | |
| 1.3.6.1.4.1.20998.2.1.1.1.4.3 | GrouprtuNotificationPowerGroup | current | RTU power management related notifications. | |
| 1.3.6.1.4.1.20998.2.1.1.1.4.4 | GrouprtuNotificationMBusGroup | current | M-Bus related notifications. | |
| 1.3.6.1.4.1.20998.2.1.1.1.4.5 | GrouprtuNotificationSecurityGroup | current | RTU security notifications. | |
| 1.3.6.1.4.1.20998.2.1.1.1.4.6 | GrouprtuNotificationMeterMulticastGroup | current | Meter multicast related notifications. | |
| 1.3.6.1.4.1.20998.2.1.1.1.4.7 | GrouprtuNotificationWebPortalGroup | current | Web portal related notifications. | |
| 1.3.6.1.4.1.20998.2.1.1.1.4.8 | GrouprtuNotificationProtocolGroup | current | Meter protocol related notifications. | |
| 1.3.6.1.4.1.20998.2.1.1.1.4.9 | GrouprtuNotificationWirelessModemGroup | current | Wireless modem related notifications. | |
| 1.3.6.1.4.1.20998.2.1.1.1.4.10 | GrouprtuNotificationDlmsGroup | current | DLMS related notifications. | |
| 1.3.6.1.4.1.20998.2.1.1.1.4.11 | GrouprtuNotificationPlcG3Group | current | PLC G3 related notifications. Note that G3-PLC management related notifications can be found in the G3-PLC-MIB. | |
| 1.3.6.1.4.1.20998.2.1.1.1.4.12 | GrouprtuNotificationPlcPrimeGroup | current | PLC PRIME related notifications. | |
| 1.3.6.1.4.1.20998.2.1.1.1.4.13 | GrouprtuNotificationPlcSfskGroup | current | Plc S-FSK related notifications. | |
| 1.3.6.1.4.1.20998.2.1.1.1.4.14 | GrouprtuNotificationWavenisGroup | current | Wavenis related notifications. | |
| 1.3.6.1.4.1.20998.2.1.1.1.4.15 | GrouprtuNotificationSNMPGroup | current | SNMP agent related notifications. | |
| 1.3.6.1.4.1.20998.2.1.1.1.5 | NodertuCompliances | |||
| 1.3.6.1.4.1.20998.2.1.1.1.5.1 | CompliancertuBasicCompliance | current | The compliance statement for implementations of the RTU-MIB module. A compliant implementation MUST implement the objects defined in the mandatory group rtuSys… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CaptureBuffer | Unsigned32 (16..262144) | current | Capture buffer size |
| CapturedTemperature | Integer32 (-2147483648..2147483647) | current | Decimal value |
| CaptureInterval | Unsigned32 (300..2147483647) | current | Capture interval in seconds |
| DecimalValue | Integer32 (-2147483648..2147483647) | current | Decimal value |
| DlmsClientId | Integer32 (0..65535) | current | Client profile identifier used during DLMS communciation. |
| DlmsLogicalDeviceId | Integer32 (0..65535) | current | Logical device SAP used during DLMS communication. |
| DlmsSecurityLevel | INTEGER { lowest(0), low(1), machineSpecific(2), highMd5(3), highSha1(4), highGmac(5), highSha256(6), highEcdsa(7) } | current | DLMS authentication security level. - lowest: No authentication required. - low: Authentication using a LLS secret - machineSpecific: Authentication using a manufacurer-specific procedure. - highMd5: Authentication usin… |
| DlmsSecurityPolicy | Integer32 (0..127) | current | Security policy specification for outgoing and incoming DLMS messages. |
| DlmsSecuritySuite | INTEGER { aesGcm128(0), ecdhEcdsaAesGcm128Sha256(1), ecdhEcdsaAesGcm256Sha384(2) } | current | DLMS security suite; Specifies a set of encryption and authentication algorithms to be used during a DLMS communication session. - aesGcm128: AES-GCM-128 using preshared secrets. - ecdhEcdsaAesGcm128Sha256: AES-GCM-128 … |
| DlmsSystemTitle | OCTET STRING | current | The system title (also referred to as 'Sys-T') is a unique identifier used within the DLMS/COSEM application protocol stack. Each communicating entity (both servers, clients and third parties) requires such number in or… |
| EpochTimeStamp | OCTET STRING (SIZE(8)) | current | A value for describing instants in time, relative to the UNIX/POSIX epoch time. This is the number of milliseconds that have elapsed since 00:00:00 Coordinated Universal Time (UTC), Thursday, 1 January 1970. This time s… |
| FileTransferFailCause | INTEGER { noError(0), unknown(1), badFileName(2), transferTimeout(3), noMemory(4), missingConfiguration(5), unsupportedProtocol(6), transferConfigUnsupported(7), systemNotReady(8), requestAborted(9) } | current | The reason a file transfer operation has failed. - noError:No file transfer has failed up till this point. - unknown: A file transfer failed for an unknown reason. - badFileName: An invalid file name has been specified … |
| FileTransferProtocol | INTEGER { tftp(0), http(1), https(2), scp(3) } | current | The type of protocol used during a file transfer. - tftp: Trivial File Transfer Protocol (RFC 1350) - http: Hypertext Transfer Protocol version 1.1 (RFC 2068) - https: HTTP over TLS connection (RFC 2818) - scp: Secure C… |
| FileTransferState | INTEGER { noTransfer(0), waiting(1), running(2), successful(3), failed(4) } | current | The state of a file transfer operation taking place. - noTransfer: No transfer has ever taken place up till this point. - waiting: A file transfer task is waiting to be dispatched, or still processing at its initial sta… |
| Frequency | Integer32 (-2147483648..2147483647) | current | Frequency |
| GatewayEndpointType | INTEGER { unicastDlms(0), multicastDlms(1) } | current | Type of endpoint provided by the application gateway. - unicastDlms: Unicast DLMS endpoint - multicastDlms: Multicast DLMS endpoint |
| HexString | OCTET STRING | current | Character sequence represented as a sequence of hexadecimal characters. |
| HexVal | Integer32 (-2147483648..2147483647) | current | Integer represented as a hexadecimal value |
| ModemCosemPsStatus | INTEGER { inactive(0), gprs(1), edge(2), umts(3), hsdpa(4), lte(5), cdma(6) } | current | Wireless modem packet switched status as defined in the DLMS user association COSEM blue book 1000-1 Ed. 12.2 section 4.7.8. |
| ModemCosemStatus | INTEGER { notRegistered(0), registeredHomeNetwork(1), searchingProvider(2), registrationDenied(3), unknown(4), registeredRoaming(5) } | current | Wireless modem status as defined in the DLMS user association COSEM blue book 1000-1 Ed. 12.2 section 4.7.8. |
| ObisCode | OCTET STRING (SIZE (6)) | current | OBIS code identifying a COSEM object instance. |
| PanNodeState | INTEGER { unknown(0), notAssociated(1), available(2), vanished(3), blacklisted(4) } | current | Describes the link status of a node on the PAN. - unknown: State cannot be determined - notAssociated: Node is not associated (offline) - available: Node is available (online) - vanished: Node has not been reachable for… |
| PhaseAngle | Integer32 (-2147483648..2147483647) | current | Phase angle |
| ProtocolPropertyType | INTEGER { string(0), bigDecimal(1), timeDuration(2), boolean(3) } | current | Type of protocol configuration parameter. - string: ISO-10646 UTF-8 encoded string value, limited to basic plain characters. - bigDecimal: BCD encoded numeric value - timeDuration: BCD encoded time duration in milliseco… |
| RowIndex | Integer32 (0..2147483647) | current | Row index of table |
| SchedulableItemType | INTEGER { register(0), loadProfile(1), eventLog(2) } | current | Type of item scheduled for readout. |
| ServerPublicKey | OCTET STRING | current | Representation of a server public key. This can either be a DER encoded X.509 certificate, or a DER encoded EC public key. |
| SystemEnvironment | INTEGER { primary(0), secondary(1), unknown(2) } | current | Describes the environment on which the system is running. A device ships with multiple environments to allow a fallback to a previous state in case a non-reversible action has failed (e.g. a failed firmware upgrade). A … |
| Temperature | Integer32 (-2147483648..2147483647) | current | Temperature |
| TrueOrFalse | INTEGER { false(0), true(1) } | current | Boolean value (starting at zero). |
| Utf8String | OCTET STRING | current | Character sequence limited to visible ISO-10646 UTF-8 characters (RFC3629). Control characters are tolerated, though discouraged from being used. |
| Voltage | Integer32 (-2147483648..2147483647) | current | Voltage |
| WirelessModemState | INTEGER { unknown(-1), stopped(0), unconfigured(1), configured(2), connecting(3), connected(4), disconnecting(5) } | current | State of the wireless modem. |
| WrappedSymmetricKey | OCTET STRING | current | Representation of a symmetric key wrapped using an AES wrap key. |