RUBYTECH-ES2126-MIB
179 objects
The MIB module for Ruby Tech.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5205 | Identityrubytech | The MIB module for Ruby Tech. | ||
| 1.3.6.1.4.1.5205.2 | Nodeswitch | |||
| 1.3.6.1.4.1.5205.2.16 | Nodees2126ProductID | |||
| 1.3.6.1.4.1.5205.2.16.1 | Nodees2126Produces | |||
| 1.3.6.1.4.1.5205.2.16.1.1 | Nodees2126System | |||
| 1.3.6.1.4.1.5205.2.16.1.1.1 | Nodees2126CommonSys | |||
| 1.3.6.1.4.1.5205.2.16.1.1.1.1 | Scalares2126Reboot | read-write | current | Reboot the system. Get this OID always return zero. 0 - do nothing 1 - Reboot without saving start 2 - Reboot with saving start |
| 1.3.6.1.4.1.5205.2.16.1.1.1.2 | Scalares2126BiosVsersion | read-only | current | Get the BIOS version of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.1.3 | Scalares2126FirmwareVersion | read-only | current | Get the firmware version of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.1.4 | Scalares2126HardwareVersion | read-only | current | Get the hardware version of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.1.5 | Scalares2126MechanicalVersion | read-only | current | Get the mechanical version of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.1.6 | Scalares2126SerialNumber | read-only | current | Get the Serial number of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.1.7 | Scalares2126HostMacAddress | read-only | current | Get the MAC address of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.1.8 | Scalares2126DevicePort | read-only | current | Get the quantity of ports that this system owns now. |
| 1.3.6.1.4.1.5205.2.16.1.1.1.9 | Scalares2126RamSize | read-only | current | Get the RAM size of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.1.10 | Scalares2126FlashSize | read-only | current | Get the flash size of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.2 | Nodees2126IP | |||
| 1.3.6.1.4.1.5205.2.16.1.1.2.1 | Scalares2126DhcpSetting | read-write | current | Get/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enable |
| 1.3.6.1.4.1.5205.2.16.1.1.2.2 | Scalares2126IPAddress | read-write | current | Get/Set the IP address of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.16.1.1.2.3 | Scalares2126NetMask | read-write | current | Get/Set the subnet mask of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.16.1.1.2.4 | Scalares2126DefaultGateway | read-write | current | Get/Set the default gateway of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.16.1.1.2.5 | Scalares2126DnsSetting | read-write | current | Get/Set the source of DNS server. You can't set this OID if DHCP status is disabled. 0 - manual, the DNS server is from manual setting 1 - Auto, the DNS server… |
| 1.3.6.1.4.1.5205.2.16.1.1.2.6 | Scalares2126DnsServer | read-write | current | Get/Set the DNS server of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.3 | Nodees2126Time | |||
| 1.3.6.1.4.1.5205.2.16.1.1.3.1 | Scalares2126SystemCurrentTime | read-only | current | Get the current time of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.3.2 | Scalares2126ManualTimeSetting | read-write | current | Get/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. Ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25. Value range: Y… |
| 1.3.6.1.4.1.5205.2.16.1.1.3.3 | Scalares2126NTPServer | read-write | current | Get/Set the NTP Time Server. You can use the IP address or domain name. |
| 1.3.6.1.4.1.5205.2.16.1.1.3.4 | Scalares2126NTPTimeZone | read-write | current | Get/Set the NTP Time Zone. Value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - GMT -… |
| 1.3.6.1.4.1.5205.2.16.1.1.3.5 | Scalares2126NTPTimeSync | read-write | current | Sync time from NTP Server. Get this OID always return zero. Set the Time Server and Time Zone before doing time sync. Notice that time server must be correct! … |
| 1.3.6.1.4.1.5205.2.16.1.1.3.6 | Scalares2126DaylightSavingTime | read-write | current | Get/Set the daylight saving time. Value range is between -5 and 5. Unit: hour. |
| 1.3.6.1.4.1.5205.2.16.1.1.3.7 | Scalares2126DaylightStartTime | read-write | current | Get/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. Example: month/day/hour 10/01… |
| 1.3.6.1.4.1.5205.2.16.1.1.3.8 | Scalares2126DaylightEndTime | read-write | current | Get/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. Example: month/day/hour 04/01/0… |
| 1.3.6.1.4.1.5205.2.16.1.1.4 | Nodees2126Account | |||
| 1.3.6.1.4.1.5205.2.16.1.1.4.1 | Scalares2126AccountNumber | read-only | current | Get the current account number(s) of the system. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.2 | Tablees2126AccountTable | not-accessible | current | This is a list of es2126AccountEntry. The numbers of entries are given by the value of es2126AccountNumber. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.2.1 | Rowes2126AccountEntry | not-accessible | current | This is the Entry(s) for account information. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.2.1.1 | Columnes2126AccountIndex | read-only | current | This is the index of the account entry. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.2.1.2 | Columnes2126AccountAuthorization | read-only | current | This is the authorization of the account entry. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.2.1.3 | Columnes2126AccountName | read-write | current | This is the username of the account entry. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.2.1.4 | Columnes2126AccountPassword | read-write | current | This is the password of the account entry. The return value is always '********'. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.3 | Scalares2126AccountAddName | read-write | current | This is the account name for adding operation. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.4 | Scalares2126AccountAddPassword | read-write | current | This is the account password for adding operation. The return value is always '********'. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.5 | Scalares2126DoAccountAdd | read-write | current | Add account name. OID es2126AccountAddName and es2126AccountAddPassword must be filled first. Get this OID always return zero. 1 - Add account. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.16.1.1.4.6 | Scalares2126AccountDel | read-write | current | Delete account. The value is valid es2126AccountIndex(Can't delete administrator). |
| 1.3.6.1.4.1.5205.2.16.1.2 | Nodees2126Snmp | |||
| 1.3.6.1.4.1.5205.2.16.1.2.1 | Scalares2126GetCommunity | read-write | current | Get/Set the get-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.16.1.2.2 | Scalares2126SetCommunity | read-write | current | Get/Set the set-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.16.1.2.3 | Scalares2126TrapHostNumber | read-only | current | Get the number of trap hosts. |
| 1.3.6.1.4.1.5205.2.16.1.2.4 | Tablees2126TrapHostTable | not-accessible | current | This is a list of trap host entry. The numbers of entries are given by the value of es2126TrapHostNumber. |
| 1.3.6.1.4.1.5205.2.16.1.2.4.1 | Rowes2126TrapHostEntry | not-accessible | current | This is the Entry Information for trap host. |
| 1.3.6.1.4.1.5205.2.16.1.2.4.1.1 | Columnes2126TrapHostIndex | read-only | current | The index of the trap host entry. |
| 1.3.6.1.4.1.5205.2.16.1.2.4.1.2 | Columnes2126TrapHostIP | read-write | current | This is the IP of the trap host. |
| 1.3.6.1.4.1.5205.2.16.1.2.4.1.3 | Columnes2126TrapHostPort | read-write | current | This is the receiving-port number of the trap host. |
| 1.3.6.1.4.1.5205.2.16.1.2.4.1.4 | Columnes2126TrapHostCommunity | read-write | current | The community name for the trap PDU. |
| 1.3.6.1.4.1.5205.2.16.1.2.8 | Scalares2126TrapBootDelayTime | read-write | current | Get/Set trap boot delay time in second. Default: 0 |
| 1.3.6.1.4.1.5205.2.16.1.3 | Nodees2126Alarm | |||
| 1.3.6.1.4.1.5205.2.16.1.3.1 | Nodees2126Event | |||
| 1.3.6.1.4.1.5205.2.16.1.3.1.1 | Scalares2126EventNumber | read-only | current | Get the total number of alarm events. |
| 1.3.6.1.4.1.5205.2.16.1.3.1.2 | Tablees2126EventTable | not-accessible | current | This is a list of alarm event entry. The numbers of entries are given by the value of es2126EventNumber. |
| 1.3.6.1.4.1.5205.2.16.1.3.1.2.1 | Rowes2126EventEntry | not-accessible | current | This is the entry information for alarm event. |
| 1.3.6.1.4.1.5205.2.16.1.3.1.2.1.1 | Columnes2126EventIndex | read-only | current | This is the index of the alarm event entry. |
| 1.3.6.1.4.1.5205.2.16.1.3.1.2.1.2 | Columnes2126EventName | read-only | current | This is the alarm event name. |
| 1.3.6.1.4.1.5205.2.16.1.3.1.2.1.3 | Columnes2126EventSendEmail | read-write | current | Send email when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.16.1.3.1.2.1.4 | Columnes2126EventSendTrap | read-write | current | Send trap when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.16.1.3.2 | Nodees2126Email | |||
| 1.3.6.1.4.1.5205.2.16.1.3.2.1 | Scalares2126EmailServer | read-write | current | This is the SMTP server for alarm event. |
| 1.3.6.1.4.1.5205.2.16.1.3.2.2 | Scalares2126EmailUsername | read-write | current | This is the Username of SMTP server. |
| 1.3.6.1.4.1.5205.2.16.1.3.2.3 | Scalares2126EmailPassword | read-write | current | This is the User Password of SMTP server. |
| 1.3.6.1.4.1.5205.2.16.1.3.2.4 | Scalares2126EmailSender | read-write | current | This is the Sender of SMTP server. |
| 1.3.6.1.4.1.5205.2.16.1.3.2.5 | Scalares2126EmailReturnPath | read-write | current | This is the return path of mail. |
| 1.3.6.1.4.1.5205.2.16.1.3.2.6 | Scalares2126EmailUserNumber | read-only | current | The number of the email users that you want to send the alarm notification. |
| 1.3.6.1.4.1.5205.2.16.1.3.2.7 | Tablees2126EmailUserTable | not-accessible | current | This is a list of email user entry. The numbers of entries are given by the value of es2126EmailUserNumber. |
| 1.3.6.1.4.1.5205.2.16.1.3.2.7.1 | Rowes2126EmailUserEntry | not-accessible | current | This is the Entry information for email user entry. |
| 1.3.6.1.4.1.5205.2.16.1.3.2.7.1.1 | Columnes2126EmailUserIndex | read-only | current | This is the index of the email user entry. |
| 1.3.6.1.4.1.5205.2.16.1.3.2.7.1.2 | Columnes2126EmailUserAddress | read-write | current | This is the email address of the email user entry. |
| 1.3.6.1.4.1.5205.2.16.1.4 | Nodees2126Tftp | |||
| 1.3.6.1.4.1.5205.2.16.1.4.1 | Scalares2126TftpServer | read-write | current | Get/Set the tftp server. |
| 1.3.6.1.4.1.5205.2.16.1.5 | Nodees2126Configuration | |||
| 1.3.6.1.4.1.5205.2.16.1.5.1 | Nodees2126SaveRestore | |||
| 1.3.6.1.4.1.5205.2.16.1.5.1.1 | Scalares2126SaveStart | read-write | current | Save current configuration into flash memory (Save as Start Configuration). Get this OID always return zero. 1 - Save. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.16.1.5.1.2 | Scalares2126SaveUser | read-write | current | Save current configuration into flash memory (Save as User Configuration). Get this OID always return zero. 1 - Save. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.16.1.5.1.3 | Scalares2126RestoreDefault | read-write | current | Restore factory default configuration. Get this OID always return zero. 2 - Restore default included default ip address. 1 - Restore default without changing c… |
| 1.3.6.1.4.1.5205.2.16.1.5.1.4 | Scalares2126RestoreUser | read-write | current | Restore user configuration. Get this OID always return zero. 1 - Restore. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.16.1.5.2 | Nodees2126ConfigFile | |||
| 1.3.6.1.4.1.5205.2.16.1.5.2.1 | Scalares2126ExportConfigName | read-write | current | Get/Set the export file path and name. |
| 1.3.6.1.4.1.5205.2.16.1.5.2.2 | Scalares2126DoExportConfig | read-write | current | Do export-config. Get this OID always return zero. 1 - Export start section. 2 - Export user-conf section. |
| 1.3.6.1.4.1.5205.2.16.1.5.2.3 | Scalares2126ImportConfigName | read-write | current | Get/Set the import file path and name. |
| 1.3.6.1.4.1.5205.2.16.1.5.2.4 | Scalares2126DoImportConfig | read-write | current | Do import-config. Get this OID always return zero. 1 - Import start section. 2 - Import user-conf section. |
| 1.3.6.1.4.1.5205.2.16.1.6 | Nodees2126Diagnostic | |||
| 1.3.6.1.4.1.5205.2.16.1.6.1 | Scalares2126InternalLoopbackTest | read-only | current | Internal loop back test. |
| 1.3.6.1.4.1.5205.2.16.1.6.2 | Scalares2126ExternalLoopbackTest | read-only | current | External loop back test. |
| 1.3.6.1.4.1.5205.2.16.1.6.3 | Scalares2126PingTest | read-write | current | Set the host address that you want to ping and the system will return the test result. |
| 1.3.6.1.4.1.5205.2.16.1.6.4 | Nodees2126Watchdog | |||
| 1.3.6.1.4.1.5205.2.16.1.6.4.1 | Scalares2126WatchdogState | read-write | current | Set the watchdog state. 1 - Enable. 0 - Disable. |
| 1.3.6.1.4.1.5205.2.16.1.6.4.2 | Scalares2126WatchdogTimeGap | read-write | current | Set the watchdog time gap, from 1 to 100. |
| 1.3.6.1.4.1.5205.2.16.1.6.4.3 | Scalares2126WatchdogHost | read-write | current | Set the watchdog host |
| 1.3.6.1.4.1.5205.2.16.1.6.4.4 | Scalares2126WatchdogResetMgtInf | read-write | current | Set the state of resetting the management cpu interface. 1 - Enable. 0 - Disable. |
| 1.3.6.1.4.1.5205.2.16.1.6.4.5 | Scalares2126WatchdogResetMgtInfCount | read-write | current | Set the count of resetting the management cpu interface. |
| 1.3.6.1.4.1.5205.2.16.1.6.4.6 | Scalares2126WatchdogResetSystem | read-write | current | Set the state of rebooting the system. 1 - Enable. 0 - Disable. |
| 1.3.6.1.4.1.5205.2.16.1.6.4.7 | Scalares2126WatchdogResetSystemCount | read-write | current | Set the count of rebooting the system |
| 1.3.6.1.4.1.5205.2.16.1.7 | Nodees2126Log | |||
| 1.3.6.1.4.1.5205.2.16.1.7.1 | Scalares2126ClearLog | read-write | current | Clear system log. Get this OID always return zero. 1 - Clear log. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.16.1.7.2 | Scalares2126UploadLog | read-write | current | Upload current system log. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero.… |
| 1.3.6.1.4.1.5205.2.16.1.7.3 | Scalares2126AutoUploadLogState | read-write | current | Enable auto-upload log function. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return… |
| 1.3.6.1.4.1.5205.2.16.1.7.4 | Scalares2126LogNumber | read-only | current | Get the number of current system log. |
| 1.3.6.1.4.1.5205.2.16.1.7.5 | Tablees2126LogTable | not-accessible | current | This is a list of log entry. The numbers of entries are given by the value of es2126LogNumber. |
| 1.3.6.1.4.1.5205.2.16.1.7.5.1 | Rowes2126LogEntry | not-accessible | current | This is the Entry information for system log. |
| 1.3.6.1.4.1.5205.2.16.1.7.5.1.1 | Columnes2126LogIndex | read-only | current | This is the index of the log entry. |
| 1.3.6.1.4.1.5205.2.16.1.7.5.1.2 | Columnes2126LogEvent | read-only | current | This is the detail information of the log entry. |
| 1.3.6.1.4.1.5205.2.16.1.8 | Nodees2126Firmware | |||
| 1.3.6.1.4.1.5205.2.16.1.8.1 | Scalares2126FirmwareFileName | read-write | current | Get/Set the path and filename for firmware upgrading. |
| 1.3.6.1.4.1.5205.2.16.1.8.2 | Scalares2126DoFirmwareUpgrade | read-write | current | Do firmware upgrade. Get this OID always return zero. 1 - Do firmware upgrade. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.16.1.9 | Nodees2126Port | |||
| 1.3.6.1.4.1.5205.2.16.1.9.1 | Nodees2126PortStatus | |||
| 1.3.6.1.4.1.5205.2.16.1.9.1.1 | Scalares2126PortStatusNumber | read-only | current | Get the number of port. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2 | Tablees2126PortStatusTable | not-accessible | current | This is a list of port status entry. The numbers of entries are given by the value of es2126PortStatusNumber. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1 | Rowes2126PortStatusEntry | not-accessible | current | This is the entry(s) for port status information. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.1 | Columnes2126PortStatusIndex | read-only | current | This is the index of the port status entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.2 | Columnes2126PortStatusMedia | read-only | current | The port media type of the port status entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.3 | Columnes2126PortStatusLink | read-only | current | This is the port link of the port status entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.4 | Columnes2126PortStatusPortState | read-only | current | This is the port state of the port status entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.5 | Columnes2126PortStatusAutoNego | read-only | current | This is the auto negotiation of the port status entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.6 | Columnes2126PortStatusSpdDpx | read-only | current | This is the speed/duplex of the port status entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.7 | Columnes2126PortStatusRxPause | read-only | current | The Rx Pause of the port status entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.8 | Columnes2126PortStatusTxPause | read-only | current | The Tx Pause of the port status entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.1.2.1.9 | Columnes2126PortStatusDescription | read-only | current | This is the description of port. |
| 1.3.6.1.4.1.5205.2.16.1.9.2 | Nodees2126PortConf | |||
| 1.3.6.1.4.1.5205.2.16.1.9.2.1 | Scalares2126PortConfNumber | read-only | current | Get the number of port configuration. |
| 1.3.6.1.4.1.5205.2.16.1.9.2.2 | Tablees2126PortConfTable | not-accessible | current | This is a list of port configuration entry. The numbers of entries are given by the value of es2126PortConfNumber. |
| 1.3.6.1.4.1.5205.2.16.1.9.2.2.1 | Rowes2126PortConfEntry | not-accessible | current | This is the Entry(s) for port configuration information. |
| 1.3.6.1.4.1.5205.2.16.1.9.2.2.1.1 | Columnes2126PortConfIndex | read-only | current | This is the index of the port configuration entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.2.2.1.2 | Columnes2126PortConfPortState | read-write | current | This is the port state of the port configuration entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.16.1.9.2.2.1.3 | Columnes2126PortConfSpdDpx | read-write | current | This is the speed/duplex of the port configuration entry. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/Full. 5 - 1G/Full. |
| 1.3.6.1.4.1.5205.2.16.1.9.2.2.1.4 | Columnes2126PortConfFlwCtrl | read-write | current | This is the flow control of the port configuration entry. 0 - asymmetric. 1 - symmetric. |
| 1.3.6.1.4.1.5205.2.16.1.9.2.2.1.5 | Columnes2126PortConfDescription | read-write | current | This is the description of port. |
| 1.3.6.1.4.1.5205.2.16.1.9.3 | Nodees2126PortBandwidth | |||
| 1.3.6.1.4.1.5205.2.16.1.9.3.1 | Tablees2126PortBandwidthTable | not-accessible | current | This is a list of port bandwidth entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.3.1.1 | Rowes2126PortBandwidthEntry | not-accessible | current | This is the Entry(s) for port bandwidth configuration. |
| 1.3.6.1.4.1.5205.2.16.1.9.3.1.1.1 | Columnes2126PortBandwidthIndex | read-only | current | This is the index of the port bandwidth entry. |
| 1.3.6.1.4.1.5205.2.16.1.9.3.1.1.2 | Columnes2126PortBandwidthIngressRate | read-write | current | Get/Set the port bandwidth ingress rate. Fast Ethernet port range: 66~102400(Kb) Gigabit Ethernet port range: 66~1024000(Kb) |
| 1.3.6.1.4.1.5205.2.16.1.9.3.1.1.3 | Columnes2126PortBandwidthEgressRate | read-write | current | Get/Set the port bandwidth egress rate. Fast Ethernet port range: 66~102400(Kb) Gigabit Ethernet port range: 66~1024000(Kb) |
| 1.3.6.1.4.1.5205.2.16.1.9.3.2 | Scalares2126PortBandwidthStormType | read-write | current | This is the bandwidth storm type. 0:Disable 1:Broadcast Storm Control 2:Multicast Storm Control 3:Unknown Unicast Storm Control 4:Broadcast, Multicast, and Unk… |
| 1.3.6.1.4.1.5205.2.16.1.9.3.3 | Scalares2126PortBandwidthStormRate | read-write | current | This is the storm rate. |
| 1.3.6.1.4.1.5205.2.16.1.10 | Nodees2126LoopDetectedConf | |||
| 1.3.6.1.4.1.5205.2.16.1.10.1 | Scalares2126LoopDetectedNumber | read-only | current | Get the number of loop detected entry. |
| 1.3.6.1.4.1.5205.2.16.1.10.2 | Tablees2126LoopDetectedTable | not-accessible | current | This is a list of loop detected entry. The number of entries are given by the value of es2126LoopDetectedNumber. |
| 1.3.6.1.4.1.5205.2.16.1.10.2.1 | Rowes2126LoopDetectedEntry | not-accessible | current | Entry(s) for loop detected information. |
| 1.3.6.1.4.1.5205.2.16.1.10.2.1.1 | Columnes2126LoopDetectedfIndex | read-only | current | This is the index of the loop detected entry. |
| 1.3.6.1.4.1.5205.2.16.1.10.2.1.2 | Columnes2126LoopDetectedStateEbl | read-write | current | The state of the loop detected entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.16.1.10.2.1.3 | Columnes2126LoopDetectedCurrentStatus | read-only | current | The current status of the loop detected port. 0 - Unlocked 1 - Locked due to the loop condition |
| 1.3.6.1.4.1.5205.2.16.1.10.2.1.4 | Columnes2126LoopDetectedResumed | read-write | current | Unlock the port which is locked due to loop condition. Get this OID always return zero. 1 - Unlock the port, 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.16.1.10.3 | Scalares2126LoopDetectedAction | read-write | current | Set the corresponding action while loop is detected. 1 - Lock the loop port, 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.16.1.20 | Nodees2126TrapEntry | |||
| 1.3.6.1.4.1.5205.2.16.1.20.1 | Notificationes2126ModuleInserted | current | Send the trap when a module is inserted to the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.16.1.20.2 | Notificationes2126ModuleRemoved | current | Send the trap when a module is removed from the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.16.1.20.3 | Notificationes2126DualMediaSwapped | current | Send the trap when the dual media port changed. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.16.1.20.4 | Notificationes2126LoopDetected | current | Send the trap when loop condition has been detected. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.16.1.20.100 | Notificationes2126StpStateDisabled | current | Send the trap when the operational state of STP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.16.1.20.101 | Notificationes2126StpStateEnabled | current | Send the trap when the operational state of STP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.16.1.20.102 | Notificationes2126StpTopologyChanged | current | Send the trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces … | |
| 1.3.6.1.4.1.5205.2.16.1.20.110 | Notificationes2126RmonRisingAlarm | current | Send the trap when an RMON rising alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that exceeds its own Risin… | |
| 1.3.6.1.4.1.5205.2.16.1.20.111 | Notificationes2126RmonFallingAlarm | current | Send the trap when an RMON falling alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that is smaller than its … | |
| 1.3.6.1.4.1.5205.2.16.1.20.120 | Notificationes2126LacpStateDisabled | current | Send the trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.16.1.20.121 | Notificationes2126LacpStateEnabled | current | Send the trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.16.1.20.123 | Notificationes2126LacpPortAdded | current | Send the trap when the state of port is in 'trunk ready'. | |
| 1.3.6.1.4.1.5205.2.16.1.20.124 | Notificationes2126LacpPortTrunkFailure | current | Send the trap when one port is not able to be aggregated due to duplex-mode of the port. | |
| 1.3.6.1.4.1.5205.2.16.1.20.140 | Notificationes2126GvrpStateDisabled | current | Send the trap when the operational state of GVRP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.16.1.20.141 | Notificationes2126GvrpStateEnabled | current | Send the trap when the operational state of LACP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.16.1.20.151 | Notificationes2126VlanPortBaseEnabled | current | Send the trap when the operational state of vlan is changed to port-based vlan. | |
| 1.3.6.1.4.1.5205.2.16.1.20.152 | Notificationes2126VlanTagBaseEnabled | current | Send the trap when the operational state of vlan is changed to tag-based vlan. | |
| 1.3.6.1.4.1.5205.2.16.1.20.153 | Notificationes2126VlanMetroBaseEnabled | current | Send the trap when the operational state of vlan is changed to metro-based vlan. | |
| 1.3.6.1.4.1.5205.2.16.1.20.200 | Notificationes2126UserLogin | current | Send the trap when one user logins the system. | |
| 1.3.6.1.4.1.5205.2.16.1.20.201 | Notificationes2126UserLogout | current | Send the trap when one user logouts the system. | |
| 1.3.6.1.4.1.5205.2.16.1.21 | Nodees2126TrapVariable | |||
| 1.3.6.1.4.1.5205.2.16.1.21.1 | Scalarusername | read-only | current | System account name. |
| 1.3.6.1.4.1.5205.2.16.1.21.2 | ScalargroupId | read-only | current | The Trunk group ID of LACP. |
| 1.3.6.1.4.1.5205.2.16.1.21.3 | Scalaractorkey | read-only | current | The actor key information for LACP. |
| 1.3.6.1.4.1.5205.2.16.1.21.4 | Scalarpartnerkey | read-only | current | The partner key information for LACP. |
| 1.3.6.1.4.1.5205.2.16.1.21.5 | Scalaruplink | read-only | current | Uplink port(s) in the metro-mode vlan. |