RUBYTECH-ES2226-MIB
572 objects
The MIB module is for Ruby Tech.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5205 | Identityrubytech | The MIB module is for Ruby Tech. | ||
| 1.3.6.1.4.1.5205.2 | Nodeswitch | |||
| 1.3.6.1.4.1.5205.2.31 | Nodees2226ProductID | |||
| 1.3.6.1.4.1.5205.2.31.1 | Nodees2226Produces | |||
| 1.3.6.1.4.1.5205.2.31.1.1 | Nodees2226System | |||
| 1.3.6.1.4.1.5205.2.31.1.1.1 | Nodees2226CommonSys | |||
| 1.3.6.1.4.1.5205.2.31.1.1.1.1 | Scalares2226Reboot | read-write | current | Reboot the system. Get this OID always return zero. 0 - do nothing 1 - Reboot without saving start 2 - Reboot with saving start |
| 1.3.6.1.4.1.5205.2.31.1.1.1.2 | Scalares2226BiosVsersion | read-only | current | Get the BIOS version of the system. |
| 1.3.6.1.4.1.5205.2.31.1.1.1.3 | Scalares2226FirmwareVersion | read-only | current | Get the firmware version of the system. |
| 1.3.6.1.4.1.5205.2.31.1.1.1.4 | Scalares2226HardwareVersion | read-only | current | Get the hardware version of the system. |
| 1.3.6.1.4.1.5205.2.31.1.1.1.5 | Scalares2226MechanicalVersion | read-only | current | Get the mechanical version of the system. |
| 1.3.6.1.4.1.5205.2.31.1.1.1.6 | Scalares2226SerialNumber | read-only | current | Get the Serial number of the system. |
| 1.3.6.1.4.1.5205.2.31.1.1.1.7 | Scalares2226HostMacAddress | read-only | current | Get the MAC address of the system. |
| 1.3.6.1.4.1.5205.2.31.1.1.1.8 | Scalares2226DevicePort | read-only | current | Get the quantity of ports that this system owns now. |
| 1.3.6.1.4.1.5205.2.31.1.1.1.9 | Scalares2226RamSize | read-only | current | Get the RAM size of the system. |
| 1.3.6.1.4.1.5205.2.31.1.1.1.10 | Scalares2226FlashSize | read-only | current | Get the flash size of the system. |
| 1.3.6.1.4.1.5205.2.31.1.1.1.11 | Scalares2226CPULoad | read-only | current | Get the CPU load of the system. |
| 1.3.6.1.4.1.5205.2.31.1.1.2 | Nodees2226IP | |||
| 1.3.6.1.4.1.5205.2.31.1.1.2.1 | Scalares2226DhcpSetting | read-write | current | Get/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enable When DHCP Relay is already running. Please disable DHCP Relay first, and then enable DHCP a… |
| 1.3.6.1.4.1.5205.2.31.1.1.2.2 | Scalares2226IPAddress | read-write | current | Get/Set the IP address of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.31.1.1.2.3 | Scalares2226NetMask | read-write | current | Get/Set the subnet mask of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.31.1.1.2.4 | Scalares2226DefaultGateway | read-write | current | Get/Set the default gateway of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.31.1.1.2.5 | Scalares2226DnsSetting | read-write | current | Get/Set the source of DNS server. You can't set this OID if DHCP status is disabled. 0 - manual, the DNS server is from manual setting 1 - Auto, the DNS server… |
| 1.3.6.1.4.1.5205.2.31.1.1.2.6 | Scalares2226DnsServer | read-write | current | Get/Set the DNS server of the system. |
| 1.3.6.1.4.1.5205.2.31.1.1.3 | Nodees2226Time | |||
| 1.3.6.1.4.1.5205.2.31.1.1.3.1 | Scalares2226SystemCurrentTime | read-only | current | Get the current time of the system. |
| 1.3.6.1.4.1.5205.2.31.1.1.3.2 | Scalares2226ManualTimeSetting | read-write | current | Get/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. Ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25. Value range: Y… |
| 1.3.6.1.4.1.5205.2.31.1.1.3.3 | Scalares2226NTPServer | read-write | current | Get/Set the NTP Time Server. You can use the IP address or domain name. |
| 1.3.6.1.4.1.5205.2.31.1.1.3.4 | Scalares2226NTPTimeZone | read-write | current | Get/Set the NTP Time Zone. Value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - GMT -… |
| 1.3.6.1.4.1.5205.2.31.1.1.3.5 | Scalares2226NTPTimeSync | read-write | current | Sync time from NTP Server. Get this OID always return zero. Set the Time Server and Time Zone before doing time sync. Notice that time server must be correct! … |
| 1.3.6.1.4.1.5205.2.31.1.1.3.6 | Scalares2226DaylightSavingTime | read-write | current | Get/Set the daylight saving time. Value range is between -5 and 5. Unit: hour. |
| 1.3.6.1.4.1.5205.2.31.1.1.3.7 | Scalares2226DaylightStartTime | read-write | current | Get/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. Example: month/day/hour 10/01… |
| 1.3.6.1.4.1.5205.2.31.1.1.3.8 | Scalares2226DaylightEndTime | read-write | current | Get/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. Example: month/day/hour 04/01/0… |
| 1.3.6.1.4.1.5205.2.31.1.1.4 | Nodees2226Account | |||
| 1.3.6.1.4.1.5205.2.31.1.1.4.1 | Scalares2226AccountNumber | read-only | current | Get the current account number(s) of the system. |
| 1.3.6.1.4.1.5205.2.31.1.1.4.2 | Tablees2226AccountTable | not-accessible | current | This is a list of es2226AccountEntry. The numbers of entries are given by the value of es2226AccountNumber. |
| 1.3.6.1.4.1.5205.2.31.1.1.4.2.1 | Rowes2226AccountEntry | not-accessible | current | This is the Entry(s) for account information. |
| 1.3.6.1.4.1.5205.2.31.1.1.4.2.1.1 | Columnes2226AccountIndex | read-only | current | This is the index of the account entry. |
| 1.3.6.1.4.1.5205.2.31.1.1.4.2.1.2 | Columnes2226AccountAuthorization | read-only | current | This is the authorization of the account entry. |
| 1.3.6.1.4.1.5205.2.31.1.1.4.2.1.3 | Columnes2226AccountName | read-write | current | This is the username of the account entry. |
| 1.3.6.1.4.1.5205.2.31.1.1.4.2.1.4 | Columnes2226AccountPassword | read-write | current | This is the password of the account entry. The return value is always '********'. |
| 1.3.6.1.4.1.5205.2.31.1.1.4.3 | Scalares2226AccountAddName | read-write | current | This is the account name for adding operation. |
| 1.3.6.1.4.1.5205.2.31.1.1.4.4 | Scalares2226AccountAddPassword | read-write | current | This is the account password for adding operation. The return value is always '********'. |
| 1.3.6.1.4.1.5205.2.31.1.1.4.5 | Scalares2226DoAccountAdd | read-write | current | Add account name. OID es2226AccountAddName and es2226AccountAddPassword must be filled first. Get this OID always return zero. 1 - Add account. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.31.1.1.4.6 | Scalares2226AccountDel | read-write | current | Delete account. The value is valid es2226AccountIndex(Can't delete administrator). |
| 1.3.6.1.4.1.5205.2.31.1.2 | Nodees2226TrapHost | |||
| 1.3.6.1.4.1.5205.2.31.1.2.1 | Scalares2226TrapBootDelayTime | read-write | current | Get/Set trap boot delay time in second. Default: 0 |
| 1.3.6.1.4.1.5205.2.31.1.2.2 | Tablees2226TrapHostTable | not-accessible | current | A list of trap host entry. The numbers of entries are given by the value of es2226TrapHostNumber. |
| 1.3.6.1.4.1.5205.2.31.1.2.2.1 | Rowes2226TrapHostEntry | not-accessible | current | This is the entry information for trap host. |
| 1.3.6.1.4.1.5205.2.31.1.2.2.1.1 | Columnes2226TrapHostIndex | read-only | current | The index of the trap host entry. |
| 1.3.6.1.4.1.5205.2.31.1.2.2.1.2 | Columnes2226TrapHostVersion | read-write | current | The version of the Trap PDU. Version :1(SNMPv1), 2(SNMPv2c), 3(SNMPv3) |
| 1.3.6.1.4.1.5205.2.31.1.2.2.1.3 | Columnes2226TrapHostIP | read-write | current | This is the IP of the trap host. |
| 1.3.6.1.4.1.5205.2.31.1.2.2.1.4 | Columnes2226TrapHostPort | read-write | current | This is the receiving-port number of the trap host. |
| 1.3.6.1.4.1.5205.2.31.1.2.2.1.5 | Columnes2226TrapHostCommunity | read-write | current | The community/security name for the trap PDU. |
| 1.3.6.1.4.1.5205.2.31.1.2.2.1.6 | Columnes2226TrapHostSecurity | read-write | current | The Security Level, NoAuthNoPriv, AuthNoPriv, and AuthPriv. security : 1(NoAuthNoPriv), 2(AuthNoPriv), 3(AuthPriv) |
| 1.3.6.1.4.1.5205.2.31.1.2.2.1.7 | Columnes2226TrapHostAuthPtc | read-write | current | This is the Authentication Protocol, which is used in AuthNoPriv, and AuthPriv. There are two Authentication Protocol can be choice, MD5 or SHA. |
| 1.3.6.1.4.1.5205.2.31.1.2.2.1.8 | Columnes2226TrapHostAuthPassword | read-write | current | The password is Authentication Key. The return value is always '********'. This Key must be more then 8 characters. If your Authentication Key is MD5, then you… |
| 1.3.6.1.4.1.5205.2.31.1.2.2.1.9 | Columnes2226TrapHostPrivPtc | read-only | current | This is the Privacy Procol, which is used in AuthPriv. |
| 1.3.6.1.4.1.5205.2.31.1.2.2.1.10 | Columnes2226TrapHostPrivPassword | read-write | current | The password is Privacy Key. The return value is always '********'. This Key must be more than 8 characters, and less than 40 characters. |
| 1.3.6.1.4.1.5205.2.31.1.2.2.1.11 | Columnes2226TrapHostCurrentMode | read-write | current | 0:Active mode, 1:Edit mode, 2:Do edit. |
| 1.3.6.1.4.1.5205.2.31.1.3 | Nodees2226Alarm | |||
| 1.3.6.1.4.1.5205.2.31.1.3.1 | Nodees2226Event | |||
| 1.3.6.1.4.1.5205.2.31.1.3.1.1 | Scalares2226EventNumber | read-only | current | Get the total number of alarm events. |
| 1.3.6.1.4.1.5205.2.31.1.3.1.2 | Tablees2226EventTable | not-accessible | current | This is a list of alarm event entry. The numbers of entries are given by the value of es2226EventNumber. |
| 1.3.6.1.4.1.5205.2.31.1.3.1.2.1 | Rowes2226EventEntry | not-accessible | current | This is the entry information for alarm event. |
| 1.3.6.1.4.1.5205.2.31.1.3.1.2.1.1 | Columnes2226EventIndex | read-only | current | This is the index of the alarm event entry. |
| 1.3.6.1.4.1.5205.2.31.1.3.1.2.1.2 | Columnes2226EventName | read-only | current | This is the alarm event name. |
| 1.3.6.1.4.1.5205.2.31.1.3.1.2.1.3 | Columnes2226EventSendEmail | read-write | current | Send email when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.31.1.3.1.2.1.4 | Columnes2226EventSendTrap | read-write | current | Send trap when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.31.1.3.2 | Nodees2226Email | |||
| 1.3.6.1.4.1.5205.2.31.1.3.2.1 | Scalares2226EmailServer | read-write | current | This is the SMTP server for alarm event. |
| 1.3.6.1.4.1.5205.2.31.1.3.2.2 | Scalares2226EmailUsername | read-write | current | This is the Username of SMTP server. |
| 1.3.6.1.4.1.5205.2.31.1.3.2.3 | Scalares2226EmailPassword | read-write | current | This is the User Password of SMTP server. |
| 1.3.6.1.4.1.5205.2.31.1.3.2.4 | Scalares2226EmailSender | read-write | current | This is the Sender of SMTP server. |
| 1.3.6.1.4.1.5205.2.31.1.3.2.5 | Scalares2226EmailReturnPath | read-write | current | This is the return path of mail. |
| 1.3.6.1.4.1.5205.2.31.1.3.2.6 | Scalares2226EmailUserNumber | read-only | current | The number of the email users that you want to send the alarm notification. |
| 1.3.6.1.4.1.5205.2.31.1.3.2.7 | Tablees2226EmailUserTable | not-accessible | current | This is a list of email user entry. The numbers of entries are given by the value of es2226EmailUserNumber. |
| 1.3.6.1.4.1.5205.2.31.1.3.2.7.1 | Rowes2226EmailUserEntry | not-accessible | current | This is the Entry information for email user entry. |
| 1.3.6.1.4.1.5205.2.31.1.3.2.7.1.1 | Columnes2226EmailUserIndex | read-only | current | This is the index of the email user entry. |
| 1.3.6.1.4.1.5205.2.31.1.3.2.7.1.2 | Columnes2226EmailUserAddress | read-write | current | This is the email address of the email user entry. |
| 1.3.6.1.4.1.5205.2.31.1.4 | Nodees2226Tftp | |||
| 1.3.6.1.4.1.5205.2.31.1.4.1 | Scalares2226TftpServer | read-write | current | Get/Set the tftp server. |
| 1.3.6.1.4.1.5205.2.31.1.5 | Nodees2226Configuration | |||
| 1.3.6.1.4.1.5205.2.31.1.5.1 | Nodees2226SaveRestore | |||
| 1.3.6.1.4.1.5205.2.31.1.5.1.1 | Scalares2226SaveStart | read-write | current | Save current configuration into flash memory (Save as Start Configuration). if the account/group is generating, please wait. Get this OID always return zero. 1… |
| 1.3.6.1.4.1.5205.2.31.1.5.1.2 | Scalares2226SaveUser | read-write | current | Save current configuration into flash memory (Save as User Configuration). if the account/group is generating, please wait. Get this OID always return zero. 1 … |
| 1.3.6.1.4.1.5205.2.31.1.5.1.3 | Scalares2226RestoreDefault | read-write | current | Restore factory default configuration. if the account/group is generating, please wait. Get this OID always return zero. 2 - Restore default included default i… |
| 1.3.6.1.4.1.5205.2.31.1.5.1.4 | Scalares2226RestoreUser | read-write | current | Restore user configuration. if the account/group is generating, please wait. Get this OID always return zero. 1 - Restore. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.31.1.5.2 | Nodees2226ConfigFile | |||
| 1.3.6.1.4.1.5205.2.31.1.5.2.1 | Scalares2226ExportConfigName | read-write | current | Get/Set the export file path and name. |
| 1.3.6.1.4.1.5205.2.31.1.5.2.2 | Scalares2226DoExportConfig | read-write | current | Do export-config. Get this OID always return zero. 1 - Export start section. 2 - Export user-conf section. |
| 1.3.6.1.4.1.5205.2.31.1.5.2.3 | Scalares2226ImportConfigName | read-write | current | Get/Set the import file path and name. |
| 1.3.6.1.4.1.5205.2.31.1.5.2.4 | Scalares2226DoImportConfig | read-write | current | Do import-config. Get this OID always return zero. 1 - Import start section. 2 - Import user-conf section. |
| 1.3.6.1.4.1.5205.2.31.1.6 | Nodees2226Diagnostic | |||
| 1.3.6.1.4.1.5205.2.31.1.6.1 | Scalares2226EEPROMTest | read-only | current | EEPROM access test. |
| 1.3.6.1.4.1.5205.2.31.1.6.2 | Scalares2226UartTest | read-only | current | UART access test. |
| 1.3.6.1.4.1.5205.2.31.1.6.3 | Scalares2226DramTest | read-only | current | DRAM access test. |
| 1.3.6.1.4.1.5205.2.31.1.6.4 | Scalares2226FlashTest | read-only | current | Flash memory access test. |
| 1.3.6.1.4.1.5205.2.31.1.6.5 | Scalares2226InternalLoopbackTest | read-only | current | Internal loop back test. |
| 1.3.6.1.4.1.5205.2.31.1.6.6 | Scalares2226ExternalLoopbackTest | read-only | current | External loop back test. |
| 1.3.6.1.4.1.5205.2.31.1.6.7 | Scalares2226PingTest | read-write | current | Set the host address that you want to ping and the system will return the test result. |
| 1.3.6.1.4.1.5205.2.31.1.7 | Nodees2226Log | |||
| 1.3.6.1.4.1.5205.2.31.1.7.1 | Scalares2226ClearLog | read-write | current | Clear system log. Get this OID always return zero. 1 - Clear log. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.31.1.7.2 | Scalares2226UploadLog | read-write | current | Upload current system log. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero.… |
| 1.3.6.1.4.1.5205.2.31.1.7.3 | Scalares2226AutoUploadLogState | read-write | current | Enable auto-upload log function. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return… |
| 1.3.6.1.4.1.5205.2.31.1.7.4 | Scalares2226LogNumber | read-only | current | Get the number of current system log. |
| 1.3.6.1.4.1.5205.2.31.1.7.5 | Tablees2226LogTable | not-accessible | current | This is a list of log entry. The numbers of entries are given by the value of es2226LogNumber. |
| 1.3.6.1.4.1.5205.2.31.1.7.5.1 | Rowes2226LogEntry | not-accessible | current | This is the Entry information for system log. |
| 1.3.6.1.4.1.5205.2.31.1.7.5.1.1 | Columnes2226LogIndex | read-only | current | This is the index of the log entry. |
| 1.3.6.1.4.1.5205.2.31.1.7.5.1.2 | Columnes2226LogEvent | read-only | current | This is the detail information of the log entry. |
| 1.3.6.1.4.1.5205.2.31.1.8 | Nodees2226Firmware | |||
| 1.3.6.1.4.1.5205.2.31.1.8.1 | Scalares2226FirmwareFileName | read-write | current | Get/Set the path and filename for firmware upgrading. |
| 1.3.6.1.4.1.5205.2.31.1.8.2 | Scalares2226DoFirmwareUpgrade | read-write | current | Do firmware upgrade. Get this OID always return zero. 1 - Do firmware upgrade. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.31.1.9 | Nodees2226Port | |||
| 1.3.6.1.4.1.5205.2.31.1.9.1 | Nodees2226PortStatus | |||
| 1.3.6.1.4.1.5205.2.31.1.9.1.1 | Scalares2226PortStatusNumber | read-only | current | Get the number of port. |
| 1.3.6.1.4.1.5205.2.31.1.9.1.2 | Tablees2226PortStatusTable | not-accessible | current | This is a list of port status entry. The numbers of entries are given by the value of es2226PortStatusNumber. |
| 1.3.6.1.4.1.5205.2.31.1.9.1.2.1 | Rowes2226PortStatusEntry | not-accessible | current | This is the entry(s) for port status information. |
| 1.3.6.1.4.1.5205.2.31.1.9.1.2.1.1 | Columnes2226PortStatusIndex | read-only | current | This is the index of the port status entry. |
| 1.3.6.1.4.1.5205.2.31.1.9.1.2.1.2 | Columnes2226PortStatusMedia | read-only | current | This is the port media type of the port status entry. |
| 1.3.6.1.4.1.5205.2.31.1.9.1.2.1.3 | Columnes2226PortStatusLink | read-only | current | This is the port link of the port status entry. |
| 1.3.6.1.4.1.5205.2.31.1.9.1.2.1.4 | Columnes2226PortStatusPortState | read-only | current | This is the port state of the port status entry. |
| 1.3.6.1.4.1.5205.2.31.1.9.1.2.1.5 | Columnes2226PortStatusAutoNego | read-only | current | This is the auto negotiation of the port status entry. |
| 1.3.6.1.4.1.5205.2.31.1.9.1.2.1.6 | Columnes2226PortStatusSpdDpx | read-only | current | This is the speed/duplex of the port status entry. |
| 1.3.6.1.4.1.5205.2.31.1.9.1.2.1.7 | Columnes2226PortStatusRxPause | read-only | current | The Rx Pause of the port status entry. |
| 1.3.6.1.4.1.5205.2.31.1.9.1.2.1.8 | Columnes2226PortStatusTxPause | read-only | current | The Tx Pause of the port status entry. |
| 1.3.6.1.4.1.5205.2.31.1.9.1.2.1.9 | Columnes2226PortStatusDescription | read-only | current | This is the description of port. |
| 1.3.6.1.4.1.5205.2.31.1.9.2 | Nodees2226PortConf | |||
| 1.3.6.1.4.1.5205.2.31.1.9.2.1 | Scalares2226PortConfNumber | read-only | current | Get the number of port configuration. |
| 1.3.6.1.4.1.5205.2.31.1.9.2.2 | Tablees2226PortConfTable | not-accessible | current | This is a list of port configuration entry. The numbers of entries are given by the value of es2226PortConfNumber. |
| 1.3.6.1.4.1.5205.2.31.1.9.2.2.1 | Rowes2226PortConfEntry | not-accessible | current | This is the Entry(s) for port configuration information. |
| 1.3.6.1.4.1.5205.2.31.1.9.2.2.1.1 | Columnes2226PortConfIndex | read-only | current | This is the index of the port configuration entry. |
| 1.3.6.1.4.1.5205.2.31.1.9.2.2.1.2 | Columnes2226PortConfPortState | read-write | current | This is the port state of the port configuration entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.31.1.9.2.2.1.3 | Columnes2226PortConfSpdDpx | read-write | current | This is the speed/duplex of the port configuration entry. Only Port25 & Port26 can set 1G/Full. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/F… |
| 1.3.6.1.4.1.5205.2.31.1.9.2.2.1.4 | Columnes2226PortConfFlwCtrl | read-write | current | This is the flow control of the port configuration entry. 0 - disable 1 - symmetric. |
| 1.3.6.1.4.1.5205.2.31.1.9.2.2.1.5 | Columnes2226PortConfPowerSaving | read-write | current | This is the power saving of the port configuration entry. 0 - disable 1 - enable. |
| 1.3.6.1.4.1.5205.2.31.1.9.2.2.1.6 | Columnes2226PortConfDescription | read-write | current | This is the description of port. |
| 1.3.6.1.4.1.5205.2.31.1.9.3 | Nodees2226PortBandwidth | |||
| 1.3.6.1.4.1.5205.2.31.1.9.3.1 | Scalares2226PortBandwidthNumber | read-only | current | Get the number of port bandwidth number. |
| 1.3.6.1.4.1.5205.2.31.1.9.3.2 | Tablees2226PortBandwidthTable | not-accessible | current | A list of port bandwidth entry. The number of entries are given by the value of es2226PortBandwidthNumber. |
| 1.3.6.1.4.1.5205.2.31.1.9.3.2.1 | Rowes2226PortBandwidthEntry | not-accessible | current | Entry(s) for port bandwidth informaion. |
| 1.3.6.1.4.1.5205.2.31.1.9.3.2.1.1 | Columnes2226PortBandwidthIndex | read-only | current | The index of the port bandwidth entry. |
| 1.3.6.1.4.1.5205.2.31.1.9.3.2.1.2 | Columnes2226PortBandwidthIngressRate | read-write | current | The Ingress rate(64~1024000) of the Bandwidth configuration. |
| 1.3.6.1.4.1.5205.2.31.1.9.3.2.1.3 | Columnes2226PortBandwidthEgressRate | read-write | current | The Egress rate(64~1024000) of the Bandwidth configuration. |
| 1.3.6.1.4.1.5205.2.31.1.9.3.2.1.4 | Columnes2226PortBandwidthStormType | read-write | current | The storm type of the Bandwidth configuration. 0 - Disable. 1 - BC. 2 - UC. 3 - BC,UC. 4 - MC. 5 - BC,MC. 6 - UC,MC. 7 - BC,UC,MC. |
| 1.3.6.1.4.1.5205.2.31.1.9.3.2.1.5 | Columnes2226PortBandwidthStormRate | read-write | current | The storm rate(64~1024000) of the Bandwidth configuration. |
| 1.3.6.1.4.1.5205.2.31.1.9.4 | Nodees2226PortSFPInfo | |||
| 1.3.6.1.4.1.5205.2.31.1.9.4.1 | Scalares2226PortSFPInfoNumber | read-only | current | Get the number of sfp info entry. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2 | Tablees2226PortSFPInfoTable | not-accessible | current | A list of sfp info entry. The numbers of entries are given by the value of es2226PortSFPInfoNumber. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2.1 | Rowes2226PortSFPInfoEntry | not-accessible | current | Entry(s) for SFP information. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2.1.1 | Columnes2226PortSFPInfoIndex | read-only | current | The index of the sfp info entry. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2.1.2 | Columnes2226PortSFPConnectorType | read-only | current | Get connector type of the sfp. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2.1.3 | Columnes2226PortSFPFiberType | read-only | current | Get fiber type of the sfp. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2.1.4 | Columnes2226PortSFPWavelength | read-only | current | Get tx central wavelength of the sfp. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2.1.5 | Columnes2226PortSFPBaudRate | read-only | current | Get baud rate of the sfp. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2.1.6 | Columnes2226PortSFPVendorOUI | read-only | current | Get vendor OUI of the sfp. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2.1.7 | Columnes2226PortSFPVendorName | read-only | current | Get vendor name of the sfp. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2.1.8 | Columnes2226PortSFPVendorPN | read-only | current | Get vendor part number of the sfp. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2.1.9 | Columnes2226PortSFPVendorRev | read-only | current | Get vendor revision number of the sfp. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2.1.10 | Columnes2226PortSFPVendorSN | read-only | current | Get vendor serial number of the sfp. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2.1.11 | Columnes2226PortSFPDateCode | read-only | current | Get data code of the sfp. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2.1.12 | Columnes2226PortSFPTemperature | read-only | current | Get current temperature of the sfp. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2.1.13 | Columnes2226PortSFPVcc | read-only | current | Get current internal supply voltage of the sfp. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2.1.14 | Columnes2226PortSFPTxBias | read-only | current | Get current TX Bias of the sfp. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2.1.15 | Columnes2226PortSFPTxPWR | read-only | current | Get current TX output power of the sfp. |
| 1.3.6.1.4.1.5205.2.31.1.9.4.2.1.16 | Columnes2226PortSFPRxPWR | read-only | current | Get current Received Power of the sfp. |
| 1.3.6.1.4.1.5205.2.31.1.10 | Nodees2226LoopDetectedConf | |||
| 1.3.6.1.4.1.5205.2.31.1.10.1 | Scalares2226LoopDetectedNumber | read-only | current | Get the number of loop detected entry. |
| 1.3.6.1.4.1.5205.2.31.1.10.2 | Tablees2226LoopDetectedTable | not-accessible | current | This is a list of loop detected entry. The numbers of entries are given by the value of es2226LoopDetectedNumber. |
| 1.3.6.1.4.1.5205.2.31.1.10.2.1 | Rowes2226LoopDetectedEntry | not-accessible | current | Entry(s) for loop detected information. |
| 1.3.6.1.4.1.5205.2.31.1.10.2.1.1 | Columnes2226LoopDetectedfIndex | read-only | current | This is the index of the loop detected entry. |
| 1.3.6.1.4.1.5205.2.31.1.10.2.1.2 | Columnes2226LoopDetectedStateEbl | read-write | current | The state of the loop detected entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.31.1.10.2.1.3 | Columnes2226LoopDetectedCurrentStatus | read-only | current | The current status of the loop detected port. 0 - unlocked 1 - Locked due to the loop condition |
| 1.3.6.1.4.1.5205.2.31.1.10.2.1.4 | Columnes2226LoopDetectedResumed | read-write | current | Unlock the port which is locked due to loop condition. Get this OID always return zero. 1 - Unlock the port, 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.31.1.10.3 | Scalares2226LoopDetectedAction | read-write | current | Set the corresponding action while loop is detected. 1 - Lock the loop port, 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.31.1.11 | Nodees2226IpMacBind | |||
| 1.3.6.1.4.1.5205.2.31.1.11.1 | Nodees2226IpMacBindStatus | |||
| 1.3.6.1.4.1.5205.2.31.1.11.1.1 | Scalares2226IpMacBindMode | read-write | current | Set the IP-MAC Binding State. 1 - Enable, 0 - Disable. |
| 1.3.6.1.4.1.5205.2.31.1.11.1.2 | Scalares2226IpMacBindPort | read-write | current | Set the IP-MAC Binding Port. Syntax: 1,5-7, available from 1 to 26. |
| 1.3.6.1.4.1.5205.2.31.1.11.1.3 | Scalares2226IpMacBindCount | read-only | current | Get the current IP-MAC Binding user count. |
| 1.3.6.1.4.1.5205.2.31.1.11.1.4 | Scalares2226IpMacBindCreatStatus | read-write | current | Create ip_mac_binding entry. 0: none 1: creat a entry. |
| 1.3.6.1.4.1.5205.2.31.1.11.1.5 | Tablees2226IpMacBindStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.11.1.5.1 | Rowes2226IpMacBindStatusEntry | not-accessible | current | Entry(s) for IP-MAC Binding Status. |
| 1.3.6.1.4.1.5205.2.31.1.11.1.5.1.1 | Columnes2226IpMacBindStatusIndex | not-accessible | current | The index of the IP-MAC Binding entry. |
| 1.3.6.1.4.1.5205.2.31.1.11.1.5.1.2 | Columnes2226IpMacBindStatusName | read-write | current | Get the name of this IP-MAC binding entry. |
| 1.3.6.1.4.1.5205.2.31.1.11.1.5.1.3 | Columnes2226IpMacBindStatusMac | read-write | current | Get the MAC address of this IP-MAC binding entry. |
| 1.3.6.1.4.1.5205.2.31.1.11.1.5.1.4 | Columnes2226IpMacBindStatusIp | read-write | current | Get the IP address of this IP-MAC binding entry. |
| 1.3.6.1.4.1.5205.2.31.1.11.1.5.1.5 | Columnes2226IpMacBindStatusPort | read-write | current | Get the binding port of this IP-MAC binding entry. |
| 1.3.6.1.4.1.5205.2.31.1.11.1.5.1.6 | Columnes2226IpMacBindStatusBindingMethod | read-write | current | Get the binding method of this IP-MAC binding entry. 0 : IP-MAC, 1 : IP, 2 : MAC |
| 1.3.6.1.4.1.5205.2.31.1.11.1.5.1.7 | Columnes2226IpMacBindStatusType | read-only | current | Get the status of this IP-MAC binding entry. 0: Static 1: Dynamic |
| 1.3.6.1.4.1.5205.2.31.1.11.1.5.1.8 | Columnes2226IpMacBindStatusRowStatus | read-write | current | 1:active, 2:notInService, 3:delete. |
| 1.3.6.1.4.1.5205.2.31.1.12 | Nodees2226MacTableInfo | |||
| 1.3.6.1.4.1.5205.2.31.1.12.1 | Nodees2226MacTableMaintenance | |||
| 1.3.6.1.4.1.5205.2.31.1.12.1.1 | Scalares2226MacTableAgingTime | read-write | current | Set the Mac Table Aging Time (10~1000000 Secs). 0 : Disable. |
| 1.3.6.1.4.1.5205.2.31.1.12.1.2 | Scalares2226MacTableFlush | read-write | current | 1 : Flush Mac Table. |
| 1.3.6.1.4.1.5205.2.31.1.12.1.3 | Tablees2226MacTableLearnPortLimitTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.12.1.3.1 | Rowes2226MacTableLearnPortLimitEntry | not-accessible | current | Entry(s) for Mac Table Port Learning Limit. |
| 1.3.6.1.4.1.5205.2.31.1.12.1.3.1.1 | Columnes2226MacTableLearnPortLimitIndex | read-only | current | The index of the Mac Table Learning Limit entry. |
| 1.3.6.1.4.1.5205.2.31.1.12.1.3.1.2 | Columnes2226MacTableLearnPortLimit | read-write | current | Port Learning Limit (0~8191). |
| 1.3.6.1.4.1.5205.2.31.1.12.2 | Nodees2226MacTableStaticMac | |||
| 1.3.6.1.4.1.5205.2.31.1.12.2.1 | Scalares2226MacTableStaticMacCreatStatus | read-write | current | Create a new high-acl 0 : None, 1 : Create a static mac temp entry |
| 1.3.6.1.4.1.5205.2.31.1.12.2.2 | Scalares2226MacTableStaticMacNumber | read-only | current | Static Mac Total Nnumber(0~1024). |
| 1.3.6.1.4.1.5205.2.31.1.12.2.3 | Tablees2226MacTableStaticMacTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.12.2.3.1 | Rowes2226MacTableStaticMacEntry | not-accessible | current | Entry(s) for Static Mac Table. |
| 1.3.6.1.4.1.5205.2.31.1.12.2.3.1.1 | Columnes2226MacTableStaticMacIndex | not-accessible | current | The index of the static mac table entry. |
| 1.3.6.1.4.1.5205.2.31.1.12.2.3.1.2 | Columnes2226MacTableStaticMacAddress | read-write | current | The mac address of the static mac table entry. |
| 1.3.6.1.4.1.5205.2.31.1.12.2.3.1.3 | Columnes2226MacTableStaticMacVid | read-write | current | The vlan id of the static mac table entry. |
| 1.3.6.1.4.1.5205.2.31.1.12.2.3.1.4 | Columnes2226MacTableStaticMacRule | read-write | current | The forwarding rule of the static mac table entry. 0 : static, 1 : Static with Destination Drop, 2 : Static with Source Drop |
| 1.3.6.1.4.1.5205.2.31.1.12.2.3.1.5 | Columnes2226MacTableStaticMacPort | read-write | current | The port of the static mac table entry. |
| 1.3.6.1.4.1.5205.2.31.1.12.2.3.1.6 | Columnes2226MacTableStaticMacRowStatus | read-write | current | 1:active, 2:notInService, 3:delete. |
| 1.3.6.1.4.1.5205.2.31.1.12.3 | Nodees2226MacTableMacAlias | |||
| 1.3.6.1.4.1.5205.2.31.1.12.3.1 | Scalares2226MacTableMacAliasCreatStatus | read-write | current | 0:not add, 1:add. |
| 1.3.6.1.4.1.5205.2.31.1.12.3.2 | Scalares2226MacTableMacAliasNumber | read-write | current | Mac Alias Total Nnumber(0~1024). |
| 1.3.6.1.4.1.5205.2.31.1.12.3.3 | Tablees2226MacTableMacAliasTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.12.3.3.1 | Rowes2226MacTableMacAliasEntry | not-accessible | current | Entry(s) for Mac Alias. |
| 1.3.6.1.4.1.5205.2.31.1.12.3.3.1.1 | Columnes2226MacTableMacAliasIndex | not-accessible | current | The index of the static mac alias entry. |
| 1.3.6.1.4.1.5205.2.31.1.12.3.3.1.2 | Columnes2226MacTableMacAliasAddress | read-write | current | The mac address of the mac alias table entry. |
| 1.3.6.1.4.1.5205.2.31.1.12.3.3.1.3 | Columnes2226MacTableMacAliasAlias | read-write | current | The alias of the mac alias table entry. |
| 1.3.6.1.4.1.5205.2.31.1.12.3.3.1.4 | Columnes2226MacTableMacAliasRowStatus | read-write | current | 1:active, 2:notInService, 3:delete. |
| 1.3.6.1.4.1.5205.2.31.1.13 | Nodees2226Security | |||
| 1.3.6.1.4.1.5205.2.31.1.13.1 | Nodees2226Mirror | |||
| 1.3.6.1.4.1.5205.2.31.1.13.1.1 | Scalares2226MirrorMode | read-write | current | Set the Mirror Enable/Disable Mode. 0 : Mirror Disable, 1 : Mirror Enable. |
| 1.3.6.1.4.1.5205.2.31.1.13.1.2 | Scalares2226MonitoringPort | read-write | current | Set the Mirror Monitoring Port.(1~26) |
| 1.3.6.1.4.1.5205.2.31.1.13.1.3 | Scalares2226MonitoredIngressPort | read-write | current | Set monitored ingress port; range syntax: 1,5-7, available from 0 to 26. 0 : Ingress Disable, 1~26 : Ingress Enable. |
| 1.3.6.1.4.1.5205.2.31.1.13.1.4 | Scalares2226MonitoredEgressPort | read-write | current | Set monitored egress port; range syntax: 1,5-7, available from 0 to 26. 0 : Egress Disable, 1~26 : Egress Enable. |
| 1.3.6.1.4.1.5205.2.31.1.13.2 | Nodees2226IsolatedGroup | |||
| 1.3.6.1.4.1.5205.2.31.1.13.2.1 | Scalares2226IsolatedPortGroup | read-write | current | Set the Isolated Group; range syntax: 1,5-7, available from 0 to 26. 0 : Isolated Group Disable, 1~26 : Isolated Group Enable |
| 1.3.6.1.4.1.5205.2.31.1.13.3 | Nodees2226ArpProtect | |||
| 1.3.6.1.4.1.5205.2.31.1.13.3.1 | Scalares2226ArpProtectPackerBurst | read-write | current | Set the packet-burst. range : 1~200 packets 0 : No limit |
| 1.3.6.1.4.1.5205.2.31.1.13.3.2 | Scalares2226ArpProtectRatePerSec | read-write | current | Set the rate-per-second. range : 64~25600 Bytes 0 : No limit |
| 1.3.6.1.4.1.5205.2.31.1.14 | Nodees2226VirtualStack | |||
| 1.3.6.1.4.1.5205.2.31.1.14.1 | Scalares2226VirtualStackState | read-write | current | Set the Virtual Stack State. 0 : disable, 1 : enable |
| 1.3.6.1.4.1.5205.2.31.1.14.2 | Scalares2226VirtualStackRole | read-write | current | Set the Virtual Stack Role. 0 : slave, 1 : master |
| 1.3.6.1.4.1.5205.2.31.1.14.3 | Scalares2226VirtualStackGroupID | read-write | current | Set the Virtual Stack Group ID. |
| 1.3.6.1.4.1.5205.2.31.1.15 | Nodees2226ManagementSecurity | |||
| 1.3.6.1.4.1.5205.2.31.1.15.1 | Scalares2226ManagementSecurityNumber | read-only | current | The Number of Management Security Entry. |
| 1.3.6.1.4.1.5205.2.31.1.15.2 | Scalares2226ManagementSecurityEntryCreate | read-write | current | Create management security entry. |
| 1.3.6.1.4.1.5205.2.31.1.15.3 | Tablees2226ManagementSecurityTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.15.3.1 | Rowes2226ManagementSecurityEntry | not-accessible | current | Entry(s) for Management Security. |
| 1.3.6.1.4.1.5205.2.31.1.15.3.1.1 | Columnes2226ManagementSecurityIndex | not-accessible | current | The index of management security entry. |
| 1.3.6.1.4.1.5205.2.31.1.15.3.1.2 | Columnes2226ManagementSecurityName | read-write | current | The name of management security entry. |
| 1.3.6.1.4.1.5205.2.31.1.15.3.1.3 | Columnes2226ManagementSecurityVid | read-write | current | The vid of management security entry. vid 0 : Any. |
| 1.3.6.1.4.1.5205.2.31.1.15.3.1.4 | Columnes2226ManagementSecurityIpRange | read-write | current | The ip range of management security entry(StartIP-EndIP). ex : 192.168.1.1-192.168.1.255, 0 : any. |
| 1.3.6.1.4.1.5205.2.31.1.15.3.1.5 | Columnes2226ManagementSecurityIncomigPort | read-write | current | The incoming Port of management security entry. range syntax: 1,5-7, available from 0 to 26, 0 : Any. |
| 1.3.6.1.4.1.5205.2.31.1.15.3.1.6 | Columnes2226ManagementSecurityAccessType | read-write | current | The access type of management security entry. range syntax: 1,3 or 1-3, available from 0 to 3. 0 : Any, 1 : http, 2 : telnet, 3 : snmp |
| 1.3.6.1.4.1.5205.2.31.1.15.3.1.7 | Columnes2226ManagementSecurityAction | read-write | current | The action of management security entry. 0 : deny, 1 : accept. |
| 1.3.6.1.4.1.5205.2.31.1.15.3.1.8 | Columnes2226ManagementSecurityRowStatus | read-write | current | The row status of management security entry. 1 - active. 2 - notInService. 3 - delete. |
| 1.3.6.1.4.1.5205.2.31.1.16 | Nodees2226QoS | |||
| 1.3.6.1.4.1.5205.2.31.1.16.1 | Nodees2226QoSGlobalConfig | |||
| 1.3.6.1.4.1.5205.2.31.1.16.1.1 | Scalares2226QoSMode | read-write | current | Set the Qos Mode Enable/Disable. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.31.1.16.1.2 | Scalares2226QoS1PEnable | read-write | current | Set the Qos 802.1P Enable/Disable. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.31.1.16.1.3 | Scalares2226QoSDSCPEnable | read-write | current | Set the Qos DSCP Enable/Disable. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.31.1.16.1.4 | Scalares2226QoSSchedulingMethod | read-write | current | Set the Qos Scheduling Method(0~3). 0 : 4 WRR 1 : 1 Strict, 3 WRR 2 : 2 Strict, 2 WRR 3 : 4 Strict |
| 1.3.6.1.4.1.5205.2.31.1.16.1.5 | Scalares2226QoSWeightQ0 | read-write | current | Set the Qos Queue 0 Weight(1~55). |
| 1.3.6.1.4.1.5205.2.31.1.16.1.6 | Scalares2226QoSWeightQ1 | read-write | current | Set the Qos Queue 1 Weight(1~55). |
| 1.3.6.1.4.1.5205.2.31.1.16.1.7 | Scalares2226QoSWeightQ2 | read-write | current | Set the Qos Queue 2 Weight(1~55). |
| 1.3.6.1.4.1.5205.2.31.1.16.1.8 | Scalares2226QoSWeightQ3 | read-write | current | Set the Qos Queue 3 Weight(1~55). |
| 1.3.6.1.4.1.5205.2.31.1.16.2 | Nodees2226QoS1PPriority | |||
| 1.3.6.1.4.1.5205.2.31.1.16.2.1 | Tablees2226QoS1PPriorityTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.16.2.1.1 | Rowes2226QoS1PPriorityEntry | not-accessible | current | Entry(s) for QoS 802.1P Priority. |
| 1.3.6.1.4.1.5205.2.31.1.16.2.1.1.1 | Columnes2226QoS1PPriorityIndex | not-accessible | current | The Priority index of QoS 802.1P Priority entry. |
| 1.3.6.1.4.1.5205.2.31.1.16.2.1.1.2 | Columnes2226QoS1PPriorityValue | read-only | current | The Priority value of QoS 802.1P Priority entry. |
| 1.3.6.1.4.1.5205.2.31.1.16.2.1.1.3 | Columnes2226QoS1PPriorityQueue | read-write | current | The Queue(0~3) of QoS 802.1P Priority. |
| 1.3.6.1.4.1.5205.2.31.1.16.3 | Nodees2226QoSDSCPPriority | |||
| 1.3.6.1.4.1.5205.2.31.1.16.3.1 | Tablees2226QoSDSCPPriorityTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.16.3.1.1 | Rowes2226QoSDSCPPriorityEntry | not-accessible | current | Entry(s) for QoS DSCP Priority. |
| 1.3.6.1.4.1.5205.2.31.1.16.3.1.1.1 | Columnes2226QoSDSCPPriorityIndex | not-accessible | current | The Priority index of QoS DSCP Priority entry. |
| 1.3.6.1.4.1.5205.2.31.1.16.3.1.1.2 | Columnes2226QoSDSCPPriorityValue | read-only | current | The Priority value of QoS DSCP Priority entry. |
| 1.3.6.1.4.1.5205.2.31.1.16.3.1.1.3 | Columnes2226QoSDSCPPriorityQueue | read-write | current | The Queue(0~3) of QoS DSCP Priority. |
| 1.3.6.1.4.1.5205.2.31.1.17 | Nodees2226Vlan | |||
| 1.3.6.1.4.1.5205.2.31.1.17.1 | Nodees2226VlanModeConfig | |||
| 1.3.6.1.4.1.5205.2.31.1.17.1.1 | Scalares2226VlanMode | read-write | current | 0:Tag-based, 1:Port-based, 2:Metro mode |
| 1.3.6.1.4.1.5205.2.31.1.17.1.2 | Scalares2226SymmetricVlan | read-write | current | 0:disable, 1:enable |
| 1.3.6.1.4.1.5205.2.31.1.17.1.3 | Scalares2226VlanSVL | read-write | current | 0:disable, 1:enable |
| 1.3.6.1.4.1.5205.2.31.1.17.1.4 | Scalares2226DoubleTag | read-write | current | 0 : disable, 1 : enable SP-tag 0x88A8, 2 : enable SP-tag 0x8100 |
| 1.3.6.1.4.1.5205.2.31.1.17.1.5 | Scalares2226SpPortMember | read-write | current | The member of Service Provider Port. Port range syntax: 1,5-7, available from 1 to 26 |
| 1.3.6.1.4.1.5205.2.31.1.17.1.6 | Scalares2226UpLinkPort | read-write | current | 0:Port 25, 1:Port 26, 2:Port 25 & 26 |
| 1.3.6.1.4.1.5205.2.31.1.17.2 | Nodees2226VlanPvid | |||
| 1.3.6.1.4.1.5205.2.31.1.17.2.1 | Tablees2226VlanPvidTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.17.2.1.1 | Rowes2226VlanPvidEntry | not-accessible | current | Entry(s) for Vlan Pvid. |
| 1.3.6.1.4.1.5205.2.31.1.17.2.1.1.1 | Columnes2226VlanPvidPort | not-accessible | current | The port number of pvid entry. |
| 1.3.6.1.4.1.5205.2.31.1.17.2.1.1.2 | Columnes2226VlanPvidValue | read-write | current | The pvid value of port. |
| 1.3.6.1.4.1.5205.2.31.1.17.2.1.1.3 | Columnes2226VlanPvidDefaultPriority | read-write | current | The default priority of port . |
| 1.3.6.1.4.1.5205.2.31.1.17.2.1.1.4 | Columnes2226VlanPvidDropUntag | read-write | current | The drop untag of port . |
| 1.3.6.1.4.1.5205.2.31.1.17.3 | Nodees2226PortBasedVlanGroup | |||
| 1.3.6.1.4.1.5205.2.31.1.17.3.1 | Scalares2226PortBasedVlanNumbers | read-only | current | Total numbers for tag-based vlan. |
| 1.3.6.1.4.1.5205.2.31.1.17.3.2 | Scalares2226PortBasedCreateStatus | read-write | current | Creat a temp vlan in port-based vlan table. 0 : none, 1 : creat a new port-based vlan. |
| 1.3.6.1.4.1.5205.2.31.1.17.3.3 | Tablees2226PortBasedVlanTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.17.3.3.1 | Rowes2226PortBasedVlanEntry | not-accessible | current | Entry(s) for port-based vlan table. |
| 1.3.6.1.4.1.5205.2.31.1.17.3.3.1.1 | Columnes2226PortBasedVlanIndex | not-accessible | current | The index of vlan. |
| 1.3.6.1.4.1.5205.2.31.1.17.3.3.1.2 | Columnes2226PortBasedVlanName | read-write | current | The name of vlan. |
| 1.3.6.1.4.1.5205.2.31.1.17.3.3.1.3 | Columnes2226PortBasedVlanMember | read-write | current | The member of vlan. |
| 1.3.6.1.4.1.5205.2.31.1.17.3.3.1.4 | Columnes2226PortBasedVlanRowStatus | read-write | current | The row status of vlan. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.5205.2.31.1.17.4 | Nodees2226ManagementVlan | |||
| 1.3.6.1.4.1.5205.2.31.1.17.4.1 | Scalares2226ManagementVlanState | read-write | current | The stat of management vlan. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.31.1.17.4.2 | Scalares2226ManagementVlanVid | read-write | current | The vid value of management vlan. |
| 1.3.6.1.4.1.5205.2.31.1.18 | Nodees2226DhcpSnooping | |||
| 1.3.6.1.4.1.5205.2.31.1.18.1 | Nodees2226DhcpSnoopingConf | |||
| 1.3.6.1.4.1.5205.2.31.1.18.1.1 | Scalares2226DhcpSnoopingState | read-write | current | Set DHCP Snooping State. 0 : Disable, 1 : Enable. When DHCP Relay is already running. Please disable DHCP Relay first, and then enable DHCP Snooping again. |
| 1.3.6.1.4.1.5205.2.31.1.18.1.2 | Tablees2226DhcpSnoopingPortCountSetupTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.18.1.2.1 | Rowes2226DhcpSnoopingPortCountSetupEntry | not-accessible | current | Entry(s) for DHCP snooping port count table. |
| 1.3.6.1.4.1.5205.2.31.1.18.1.2.1.1 | Columnes2226DhcpSnoopingPortCountSetupPortIndex | not-accessible | current | The port index of DHCP snooping port count table. |
| 1.3.6.1.4.1.5205.2.31.1.18.1.2.1.2 | Columnes2226DhcpSnoopingPortCountSetupCount | read-write | current | Set client-count. Limit range from 0 to 512. 0 for disable. |
| 1.3.6.1.4.1.5205.2.31.1.18.2 | Nodees2226DhcpSnoopingTrustGroupConf | |||
| 1.3.6.1.4.1.5205.2.31.1.18.2.1 | Scalares2226DhcpSnoopingTrustGroupNumbers | read-only | current | Numbers of DHCP snooping trust group |
| 1.3.6.1.4.1.5205.2.31.1.18.2.2 | Scalares2226DhcpSnoopingTrustGroupCreatStatus | read-write | current | Creat a temp trust group in table. range : 1~4094 |
| 1.3.6.1.4.1.5205.2.31.1.18.2.3 | Tablees2226DhcpSnoopingTrustGroupTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.18.2.3.1 | Rowes2226DhcpSnoopingTrustGroupEntry | not-accessible | current | Entry(s) for DHCP snooping trust group table. |
| 1.3.6.1.4.1.5205.2.31.1.18.2.3.1.1 | Columnes2226DhcpSnoopingTrustGroupIndex | not-accessible | current | The index of DHCP snooping trust group table. |
| 1.3.6.1.4.1.5205.2.31.1.18.2.3.1.2 | Columnes2226DhcpSnoopingTrustGroupTrustVid | read-write | current | Trust Vid in turst group. range : 1~4094. |
| 1.3.6.1.4.1.5205.2.31.1.18.2.3.1.3 | Columnes2226DhcpSnoopingTrustGroupOption82 | read-write | current | Option82 state in turst group. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.31.1.18.2.3.1.4 | Columnes2226DhcpSnoopingTrustGroupAction | read-write | current | Action in turst group. 0 : Replace, 1 : Keep, 2 : Drop. |
| 1.3.6.1.4.1.5205.2.31.1.18.2.3.1.5 | Columnes2226DhcpSnoopingTrustGroupServerPort | read-write | current | Trust port in turst group. Trust port with range format, max port 2 ports |
| 1.3.6.1.4.1.5205.2.31.1.18.2.3.1.6 | Columnes2226DhcpSnoopingTrustGroupServerVid | read-write | current | Server Vid in turst group. range : 1~4094. |
| 1.3.6.1.4.1.5205.2.31.1.18.2.3.1.7 | Columnes2226DhcpSnoopingTrustGroupServerIp | read-write | current | Server ip in turst group. |
| 1.3.6.1.4.1.5205.2.31.1.18.2.3.1.8 | Columnes2226DhcpSnoopingTrustGroupRowStatus | read-write | current | The row status of trust group. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.5205.2.31.1.18.3 | Nodees2226DhcpSnoopingDefaultGroupConf | |||
| 1.3.6.1.4.1.5205.2.31.1.18.3.1 | Scalares2226DhcpSnoopingDefaultGroupServerPort | read-write | current | Server port in default turst group. Server port with range format, max port 2 ports, 0 for disabled |
| 1.3.6.1.4.1.5205.2.31.1.18.3.2 | Scalares2226DhcpSnoopingDefaultGroupServerVid | read-write | current | Server Vid in default turst group. range : 1~4094. |
| 1.3.6.1.4.1.5205.2.31.1.18.3.3 | Scalares2226DhcpSnoopingDefaultGroupOption82 | read-write | current | Option82 state in default turst group. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.31.1.18.3.4 | Scalares2226DhcpSnoopingDefaultGroupAction | read-write | current | Action in turst group. 0 : Replace, 1 : Keep, 2 : Drop. |
| 1.3.6.1.4.1.5205.2.31.1.18.3.5 | Scalares2226DhcpSnoopingDefaultGroupServerIp | read-write | current | Server ip in default turst group. |
| 1.3.6.1.4.1.5205.2.31.1.18.4 | Nodees2226DhcpSnoopingLeaseList | |||
| 1.3.6.1.4.1.5205.2.31.1.18.4.1 | Scalares2226DhcpSnoopingLeaseListDeleteAll | read-write | current | Delete all lease list. 0 : None, 1 : Delete All. |
| 1.3.6.1.4.1.5205.2.31.1.18.4.2 | Scalares2226DhcpSnoopingLeaseListNumbers | read-only | current | Numbers of lease list. |
| 1.3.6.1.4.1.5205.2.31.1.18.4.3 | Tablees2226DhcpSnoopingLeaseListTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.18.4.3.1 | Rowes2226DhcpSnoopingLeaseListEntry | not-accessible | current | Entry(s) for DHCP snooping lease list table. |
| 1.3.6.1.4.1.5205.2.31.1.18.4.3.1.1 | Columnes2226DhcpSnoopingLeaseListIndex | not-accessible | current | The index of DHCP snooping lease list table. |
| 1.3.6.1.4.1.5205.2.31.1.18.4.3.1.2 | Columnes2226DhcpSnoopingLeaseListMac | read-only | current | The MAC of DHCP snooping lease list entry. |
| 1.3.6.1.4.1.5205.2.31.1.18.4.3.1.3 | Columnes2226DhcpSnoopingLeaseListIp | read-only | current | The IP of DHCP snooping lease list entry. |
| 1.3.6.1.4.1.5205.2.31.1.18.4.3.1.4 | Columnes2226DhcpSnoopingLeaseListPort | read-only | current | The port of DHCP snooping lease list entry. |
| 1.3.6.1.4.1.5205.2.31.1.18.4.3.1.5 | Columnes2226DhcpSnoopingLeaseListVid | read-only | current | The vid of DHCP snooping lease list entry. |
| 1.3.6.1.4.1.5205.2.31.1.18.4.3.1.6 | Columnes2226DhcpSnoopingLeaseListLease | read-only | current | The lease of DHCP snooping lease list entry. (Day:Hour:Min:Sec) |
| 1.3.6.1.4.1.5205.2.31.1.18.5 | Nodees2226DhcpSnoopingCounter | |||
| 1.3.6.1.4.1.5205.2.31.1.18.5.1 | Scalares2226DhcpSnoopingCounterReset | read-write | current | Reset dhcp snooptin port counter. 0 : None, 1 : reset. |
| 1.3.6.1.4.1.5205.2.31.1.18.5.2 | Tablees2226DhcpSnoopingCounterTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.18.5.2.1 | Rowes2226DhcpSnoopingCounterEntry | not-accessible | current | Entry(s) for DHCP snooping port counter table. |
| 1.3.6.1.4.1.5205.2.31.1.18.5.2.1.1 | Columnes2226DhcpSnoopingCounterPortIndex | not-accessible | current | The port index of DHCP snooping port counter table. |
| 1.3.6.1.4.1.5205.2.31.1.18.5.2.1.2 | Columnes2226DhcpSnoopingCounterDiscover | read-only | current | The discover of DHCP snooping port counter entry. |
| 1.3.6.1.4.1.5205.2.31.1.18.5.2.1.3 | Columnes2226DhcpSnoopingCounterOffer | read-only | current | The offer of DHCP snooping port counter entry. |
| 1.3.6.1.4.1.5205.2.31.1.18.5.2.1.4 | Columnes2226DhcpSnoopingCounterRequest | read-only | current | The request of DHCP snooping port counter entry. |
| 1.3.6.1.4.1.5205.2.31.1.18.5.2.1.5 | Columnes2226DhcpSnoopingCounterDecline | read-only | current | The decline of DHCP snooping port counter entry. |
| 1.3.6.1.4.1.5205.2.31.1.18.5.2.1.6 | Columnes2226DhcpSnoopingCounterAck | read-only | current | The ack of DHCP snooping port counter entry. |
| 1.3.6.1.4.1.5205.2.31.1.18.5.2.1.7 | Columnes2226DhcpSnoopingCounterNack | read-only | current | The nack of DHCP snooping port counter entry. |
| 1.3.6.1.4.1.5205.2.31.1.18.5.2.1.8 | Columnes2226DhcpSnoopingCounterRelease | read-only | current | The release of DHCP snooping port counter entry. |
| 1.3.6.1.4.1.5205.2.31.1.18.5.2.1.9 | Columnes2226DhcpSnoopingCounterInform | read-only | current | The inform of DHCP snooping port counter entry. |
| 1.3.6.1.4.1.5205.2.31.1.19 | Nodees2226Dot1X | |||
| 1.3.6.1.4.1.5205.2.31.1.19.1 | Nodees2226Dot1XStateSetting | |||
| 1.3.6.1.4.1.5205.2.31.1.19.1.1 | Scalares2226RadiusServer1 | read-write | current | Set radius server 1 ip |
| 1.3.6.1.4.1.5205.2.31.1.19.1.2 | Scalares2226Dot1XPort1 | read-write | current | Set 802.1X port number |
| 1.3.6.1.4.1.5205.2.31.1.19.1.3 | Scalares2226RadiusServer2 | read-write | current | Set radius server 2 ip |
| 1.3.6.1.4.1.5205.2.31.1.19.1.4 | Scalares2226Dot1XPort2 | read-write | current | Set 802.1X port number |
| 1.3.6.1.4.1.5205.2.31.1.19.1.5 | Scalares2226SecretKey1 | read-write | current | Set 802.1X secret key |
| 1.3.6.1.4.1.5205.2.31.1.19.1.6 | Scalares2226AccountingService | read-write | current | Set 802.1X accounting service 0 : disable 1 : enable |
| 1.3.6.1.4.1.5205.2.31.1.19.1.7 | Scalares2226AccountingServer1 | read-write | current | Set 802.1X accounting server 1 |
| 1.3.6.1.4.1.5205.2.31.1.19.1.8 | Scalares2226AccountingPort1 | read-write | current | Set 802.1X accounting port number |
| 1.3.6.1.4.1.5205.2.31.1.19.1.9 | Scalares2226AccountingServer2 | read-write | current | Set 802.1X accounting server 2 |
| 1.3.6.1.4.1.5205.2.31.1.19.1.10 | Scalares2226AccountingPort2 | read-write | current | Set 802.1X accounting port number |
| 1.3.6.1.4.1.5205.2.31.1.19.1.11 | Scalares2226SecretKey2 | read-write | current | Set 802.1X secret key |
| 1.3.6.1.4.1.5205.2.31.1.19.2 | Nodees2226Dot1XPortSecurityManagement | |||
| 1.3.6.1.4.1.5205.2.31.1.19.2.1 | Tablees2226Dot1XPortSecurityTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.19.2.1.1 | Rowes2226Dot1XPortSecurityEntry | not-accessible | current | Entry(s) for 802.1x port security management table. |
| 1.3.6.1.4.1.5205.2.31.1.19.2.1.1.1 | Columnes2226Dot1XPortSecurityPortIndex | not-accessible | current | The port index of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.31.1.19.2.1.1.2 | Columnes2226Dot1XPortSecurityMode | read-write | current | The mode of 802.1x port security. 0 : Disable, 1 : Normal, 2 : Advanced 802.1X |
| 1.3.6.1.4.1.5205.2.31.1.19.2.1.1.3 | Columnes2226Dot1XPortSecurityPortControl | read-write | current | The port control of 802.1x port security. 0 : ForceUnauthorized, 1 : ForceAuthorized, 2 : Auto |
| 1.3.6.1.4.1.5205.2.31.1.19.2.1.1.4 | Columnes2226Dot1XPortSecurityReAuthMax | read-write | current | The reAuthMax(1~10) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.31.1.19.2.1.1.5 | Columnes2226Dot1XPortSecurityTxPeriod | read-write | current | The txPeriod(1~65535) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.31.1.19.2.1.1.6 | Columnes2226Dot1XPortSecurityQuietPeriod | read-write | current | The quiet period(0~65535) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.31.1.19.2.1.1.7 | Columnes2226Dot1XPortSecurityReAuthEnabled | read-write | current | The reAuthEnabled of 802.1x port security. 0 : off, 1 : on. |
| 1.3.6.1.4.1.5205.2.31.1.19.2.1.1.8 | Columnes2226Dot1XPortSecurityReAuthPeriod | read-write | current | The reAuthPeriod(1~65535) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.31.1.19.2.1.1.9 | Columnes2226Dot1XPortSecurityMaxRequest | read-write | current | The max.request(1~10) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.31.1.19.2.1.1.10 | Columnes2226Dot1XPortSecuritySuppTimeout | read-write | current | The suppTimeout(1~255) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.31.1.19.2.1.1.11 | Columnes2226Dot1XPortSecurityServerTimeout | read-write | current | The server timeout(1~255) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.31.1.19.2.1.1.12 | Columnes2226Dot1XPortSecurityStatus | read-only | current | The status of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.31.1.20 | Nodees2226TrapEntry | |||
| 1.3.6.1.4.1.5205.2.31.1.20.1 | Notificationes2226ModuleInserted | current | Send the trap when a module is inserted to the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.31.1.20.2 | Notificationes2226ModuleRemoved | current | Send the trap when a module is removed from the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.31.1.20.3 | Notificationes2226DualMediaSwapped | current | Send the trap when the dual media port changed. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.31.1.20.4 | Notificationes2226LoopDetected | current | Send the trap when loop condition has been detected. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.31.1.20.5 | Notificationes2226IpMacBindOffered | current | Send the trap when a pair of IP-MAC binding is offered. | |
| 1.3.6.1.4.1.5205.2.31.1.20.6 | Notificationes2226IpMacBindReleased | current | Send the trap when a pair of IP-MAC binding is released. | |
| 1.3.6.1.4.1.5205.2.31.1.20.7 | Notificationes2226ARPInspectionDetected | current | Send the trap when ARP inspection detected. | |
| 1.3.6.1.4.1.5205.2.31.1.20.100 | Notificationes2226StpStateDisabled | current | Send the trap when the operational state of STP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.31.1.20.101 | Notificationes2226StpStateEnabled | current | Send the trap when the operational state of STP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.31.1.20.102 | Notificationes2226StpTopologyChanged | current | Send the trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces … | |
| 1.3.6.1.4.1.5205.2.31.1.20.110 | Notificationes2226RmonRisingAlarm | current | Send the trap when an RMON rising alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that exceeds its own Risin… | |
| 1.3.6.1.4.1.5205.2.31.1.20.111 | Notificationes2226RmonFallingAlarm | current | Send the trap when an RMON falling alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that is smaller than its … | |
| 1.3.6.1.4.1.5205.2.31.1.20.120 | Notificationes2226LacpStateDisabled | current | Send the trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.31.1.20.121 | Notificationes2226LacpStateEnabled | current | Send the trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.31.1.20.123 | Notificationes2226LacpPortAdded | current | Send the trap when the state of port is in 'trunk ready'. | |
| 1.3.6.1.4.1.5205.2.31.1.20.124 | Notificationes2226LacpPortTrunkFailure | current | Send the trap when one port is not able to be aggregated due to duplex-mode of the port. | |
| 1.3.6.1.4.1.5205.2.31.1.20.140 | Notificationes2226GvrpStateDisabled | current | Send the trap when the operational state of GVRP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.31.1.20.141 | Notificationes2226GvrpStateEnabled | current | Send the trap when the operational state of LACP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.31.1.20.151 | Notificationes2226VlanPortBaseEnabled | current | Send the trap when the operational state of vlan is changed to port-based vlan. | |
| 1.3.6.1.4.1.5205.2.31.1.20.152 | Notificationes2226VlanTagBaseEnabled | current | Send the trap when the operational state of vlan is changed to tag-based vlan. | |
| 1.3.6.1.4.1.5205.2.31.1.20.153 | Notificationes2226VlanMetroBaseEnabled | current | Send the trap when the operational state of vlan is changed to metro-based vlan. | |
| 1.3.6.1.4.1.5205.2.31.1.20.200 | Notificationes2226UserLogin | current | Send the trap when one user logins the system. | |
| 1.3.6.1.4.1.5205.2.31.1.20.201 | Notificationes2226UserLogout | current | Send the trap when one user logouts the system. | |
| 1.3.6.1.4.1.5205.2.31.1.21 | Nodees2226TrapVariable | |||
| 1.3.6.1.4.1.5205.2.31.1.21.1 | Scalarusername | read-only | current | System account name. |
| 1.3.6.1.4.1.5205.2.31.1.21.2 | ScalargroupId | read-only | current | The Trunk group ID of LACP. |
| 1.3.6.1.4.1.5205.2.31.1.21.3 | Scalaractorkey | read-only | current | This is the actor key information for LACP. |
| 1.3.6.1.4.1.5205.2.31.1.21.4 | Scalarpartnerkey | read-only | current | This is the partner key information for LACP. |
| 1.3.6.1.4.1.5205.2.31.1.21.5 | Scalaruplink | read-only | current | Uplink port(s) in the metro-mode vlan. |
| 1.3.6.1.4.1.5205.2.31.1.21.6 | Scalaripmacbind | read-only | current | IP-MAC Binding value. Format as mac:00:40:c7:00:00:01,ip:192.168.2.3,port:20 00:40:c7:00:00:01 is the mac address; 192.168.2.3 is the binding ip address; port:… |
| 1.3.6.1.4.1.5205.2.31.1.21.7 | Scalararpinspect | read-only | current | ARP Inspection detected. Format as mac:00:40:c7:00:00:01, port:20, Unknown Mac/IP. |
| 1.3.6.1.4.1.5205.2.31.1.22 | Nodees2226Acl | |||
| 1.3.6.1.4.1.5205.2.31.1.22.1 | Nodees2226HighAcl | |||
| 1.3.6.1.4.1.5205.2.31.1.22.1.1 | Scalares2226HighAclCreatStatus | read-write | current | Create a new high-acl 0 : None, 1 : Create a high-acl temp entry |
| 1.3.6.1.4.1.5205.2.31.1.22.1.2 | Scalares2226HighAclNumbers | read-only | current | Numbers of high-acl table. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3 | Tablees2226HighAclTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1 | Rowes2226HighAclEntry | not-accessible | current | Entry(s) for high-acl table. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.1 | Columnes2226HighAclIndex | not-accessible | current | The entry index of high-acl table. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.2 | Columnes2226HighAclName | read-write | current | The name of high-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.3 | Columnes2226HighAclIngressPortMap | read-write | current | The ingress port map of high-acl entry. port range: syntax: 1,5-7, available from 1 to 26, 0 for any. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.4 | Columnes2226HighAclSMacFilter | read-write | current | The source mac filter of high-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.5 | Columnes2226HighAclDMacFilter | read-write | current | The destination mac filter of high-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.6 | Columnes2226HighAclVlanType | read-write | current | The vlan type of high-acl entry. 0 : Any, 1 : Tag-Based Vlan. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.7 | Columnes2226HighAclTagVid | read-write | current | The tag-based vlan vid of high-acl entry. VLAN ID, form 1 to 4094, 0 for priority tag. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.8 | Columnes2226HighAclTagPriority | read-write | current | The tag priority(0~7) of high-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.9 | Columnes2226HighAclEthernetType | read-write | current | The ethernet type of high-acl entry. Ethernet type, format: 0806 (in hexadecimal format). Example: IPv4 for 0800, ARP for 0806, Any for 0000. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.10 | Columnes2226HighAclIPv4Protocol | read-write | current | The IPv4 protocol of high-acl entry. IPv4 protocol, from 0 to 255. Example: ICMP for 1, UDP for 17, TCP for 6. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.11 | Columnes2226HighAclIPv4ToS | read-write | current | The IPv4 ToS of high-acl entry. IPv4 TOS field, from 00 to ff (in hexadecimal format). |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.12 | Columnes2226HighAclIPv4TTLRange | read-write | current | The IPv4 TTL Range of high-acl entry. 0 : 0, 1 : 1, 2 : 2~254, 3 : 255. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.13 | Columnes2226HighAclIPv4DA | read-write | current | The IPv4 destination Address value of high-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.14 | Columnes2226HighAclIPv4DAMask | read-write | current | The IPv4 destination Address mask value of high-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.15 | Columnes2226HighAclIPv4SA | read-write | current | The IPv4 Source Address value of high-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.16 | Columnes2226HighAclIPv4SAMask | read-write | current | The IPv4 Source Address mask value of high-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.17 | Columnes2226HighAclL4DestinationPort | read-write | current | The L4 destination port number of high-acl entry. port: IPv4 L4 destination port, from 0 to 65535 |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.18 | Columnes2226HighAclL4SourcePort | read-write | current | The L4 source port number of high-acl entry. port: IPv4 L4 source port, from 0 to 65535 |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.19 | Columnes2226HighAclActionIBForwardDecision | read-write | current | The forward decision in in-Band. 0 : No change, 1 : Use new forward map, 2 : ORed with new map, 3 : Explicit actions |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.20 | Columnes2226HighAclActionIBForwardMap | read-write | current | If es2226HighAclActionIBForwardDecision as 0 then 0 : As ARL map. If es2226HighAclActionIBForwardDecision as 1 or 2 then 0 : All Linked-Port, 1~26 : Port 1 ~ P… |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.21 | Columnes2226HighAclActionIBModifyDSCPPacket | read-write | current | Modify DSCP packet value in in-Band. 0 : Any, 1 : Specific. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.22 | Columnes2226HighAclActionIBModifyDSCPValue | read-write | current | Be used by es2226HighAclActionIBModifyDSCPPacket as 1. New DSCP field value, from 0 to 63 |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.23 | Columnes2226HighAclActionOBForwardDecision | read-write | current | The forward decision in out-Band. 0 : No change, 1 : Use new forward map, 2 : ORed with new map, 3 : Explicit actions |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.24 | Columnes2226HighAclActionOBForwardMap | read-write | current | If es2226HighAclActionOBForwardDecision as 0 0 : As ARL map. If es2226HighAclActionOBForwardDecision as 1 or 2 then 0 : All Linked-Port, 1~26 : Port 1 ~ Port 2… |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.25 | Columnes2226HighAclActionOBModifyDSCPPacket | read-write | current | Modify DSCP packet value in out-Band. 0 : Any, 1 : Specific. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.26 | Columnes2226HighAclActionOBModifyDSCPValue | read-write | current | Be used by es2226HighAclActionOBModifyDSCPPacket as 1. New DSCP field value, from 0 to 63 |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.27 | Columnes2226HighAclActionModifyDot1PPacket | read-write | current | Modify 802.1P packet value. 0 : Any, 1 : Specific. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.28 | Columnes2226HighAclActionModifyDot1PValue | read-write | current | Be used by es2226HighAclActionModifyDot1PPacket as 1. New 802.1P field value, from 0 to 7 |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.29 | Columnes2226HighAclActionModifyQoSPacket | read-write | current | Modify QoS packet value. 0 : Any, 1 : Specific. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.30 | Columnes2226HighAclActionModifyQoSValue | read-write | current | Be used by es2226HighAclActionModifyQoSPacket as 1. New QoS field value, from 0 to 3 |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.31 | Columnes2226HighAclRateMeter | read-write | current | The rate meter(64..1024000) of high-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.1.3.1.32 | Columnes2226HighAclRowStatus | read-write | current | The row status of high-acl entry. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.5205.2.31.1.22.2 | Nodees2226LowAcl | |||
| 1.3.6.1.4.1.5205.2.31.1.22.2.1 | Scalares2226LowAclCreatStatus | read-write | current | Create a new low-acl 0 : None, 1 : Create a low-acl temp entry |
| 1.3.6.1.4.1.5205.2.31.1.22.2.2 | Scalares2226LowAclNumbers | read-only | current | Numbers of low-acl table. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3 | Tablees2226LowAclTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1 | Rowes2226LowAclEntry | not-accessible | current | Entry(s) for Low-acl table. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.1 | Columnes2226LowAclIndex | not-accessible | current | The entry index of Low-acl table. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.2 | Columnes2226LowAclName | read-write | current | The name of low-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.3 | Columnes2226LowAclIngressPortMap | read-write | current | The ingress port map of Low-acl entry. port range: syntax: 1,5-7, available from 1 to 26, 0 for any. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.4 | Columnes2226LowAclSMacFilter | read-write | current | The source mac filter of low-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.5 | Columnes2226LowAclDMacFilter | read-write | current | The destination mac filter of low-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.6 | Columnes2226LowAclVlanType | read-write | current | The vlan type of low-acl entry. 0 : Any, 1 : Tag-Based Vlan. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.7 | Columnes2226LowAclTagVid | read-write | current | The tag-based vlan vid of low-acl entry. VLAN ID, form 1 to 4094, 0 for priority tag. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.8 | Columnes2226LowAclTagPriority | read-write | current | The tag priority(0~7) of low-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.9 | Columnes2226LowAclEthernetType | read-write | current | The ethernet type of low-acl entry. Ethernet type, format: 0806 (in hexadecimal format). Example: IPv4 for 0800, ARP for 0806, Any for 0000. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.10 | Columnes2226LowAclIPv4Protocol | read-write | current | The IPv4 protocol of low-acl entry. IPv4 protocol, from 0 to 255. Example: ICMP for 1, UDP for 17, TCP for 6. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.11 | Columnes2226LowAclIPv4ToS | read-write | current | The IPv4 ToS of low-acl entry. IPv4 TOS field, from 00 to ff (in hexadecimal format). |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.12 | Columnes2226LowAclIPv4TTLRange | read-write | current | The IPv4 TTL Range of low-acl entry. 0 : 0, 1 : 1, 2 : 2~254, 3 : 255. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.13 | Columnes2226LowAclIPv4DA | read-write | current | The IPv4 destination Address value of low-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.14 | Columnes2226LowAclIPv4DAMask | read-write | current | The IPv4 destination Address mask value of low-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.15 | Columnes2226LowAclIPv4SA | read-write | current | The IPv4 Source Address value of low-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.16 | Columnes2226LowAclIPv4SAMask | read-write | current | The IPv4 Source Address mask value of low-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.17 | Columnes2226LowAclL4DestinationPort | read-write | current | The L4 destination port number of low-acl entry. IPv4 L4 destination port, from 0 to 65535 |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.18 | Columnes2226LowAclL4SourcePort | read-write | current | The L4 source port number of low-acl entry. IPv4 L4 source port, from 0 to 65535 |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.19 | Columnes2226LowAclActionIBForwardDecision | read-write | current | The forward decision in in-Band. 0 : No change, 1 : Use new forward map, 2 : ORed with new map, 3 : Explicit actions |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.20 | Columnes2226LowAclActionIBForwardMap | read-write | current | If es2226LowAclActionIBForwardDecision as 0 then 0 : As ARL map. If es2226LowAclActionIBForwardDecision as 1 or 2 then 0 : All Linked-Port, 1~26 : Port 1 ~ Por… |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.21 | Columnes2226LowAclActionIBModifyDSCPPacket | read-write | current | Modify DSCP packet value in in-Band. 0 : Any, 1 : Specific. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.22 | Columnes2226LowAclActionIBModifyDSCPValue | read-write | current | Be used by es2226LowAclActionIBModifyDSCPPacket as 1. New DSCP field value, from 0 to 63 |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.23 | Columnes2226LowAclActionOBForwardDecision | read-write | current | The forward decision in out-Band. 0 : No change, 1 : Use new forward map, 2 : ORed with new map, 3 : Explicit actions |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.24 | Columnes2226LowAclActionOBForwardMap | read-write | current | If es2226LowAclActionOBForwardDecision as 0 0 : As ARL map. If es2226LowAclActionOBForwardDecision as 1 or 2 then 0 : All Linked-Port, 1~26 : Port 1 ~ Port 26 … |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.25 | Columnes2226LowAclActionOBModifyDSCPPacket | read-write | current | Modify DSCP packet value in out-Band. 0 : Any, 1 : Specific. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.26 | Columnes2226LowAclActionOBModifyDSCPValue | read-write | current | Be used by es2226LowAclActionOBModifyDSCPPacket as 1. New DSCP field value, from 0 to 63 |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.27 | Columnes2226LowAclActionModifyDot1PPacket | read-write | current | Modify 802.1P packet value. 0 : Any, 1 : Specific. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.28 | Columnes2226LowAclActionModifyDot1PValue | read-write | current | Be used by es2226LowAclActionModifyDot1PPacket as 1. New 802.1p field value, from 0 to 7 |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.29 | Columnes2226LowAclActionModifyQoSPacket | read-write | current | Modify QoS packet value. 0 : Any, 1 : Specific. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.30 | Columnes2226LowAclActionModifyQoSValue | read-write | current | Be used by es2226LowAclActionModifyQoSPacket as 1. New QoS field value, from 0 to 3 |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.31 | Columnes2226LowAclRateMeter | read-write | current | The rate meter(64..1024000) of low-acl entry. |
| 1.3.6.1.4.1.5205.2.31.1.22.2.3.1.32 | Columnes2226LowAclRowStatus | read-write | current | The row status of low-acl entry. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.5205.2.31.1.23 | Nodees2226TrunkInfo | |||
| 1.3.6.1.4.1.5205.2.31.1.23.1 | Nodees2226TrunkPort | |||
| 1.3.6.1.4.1.5205.2.31.1.23.1.1 | Tablees2226TrunkPortTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.23.1.1.1 | Rowes2226TrunkPortEntry | not-accessible | current | Entry(s) for trunk table. |
| 1.3.6.1.4.1.5205.2.31.1.23.1.1.1.1 | Columnes2226TrunkPortIndex | not-accessible | current | The port index of trunk table. |
| 1.3.6.1.4.1.5205.2.31.1.23.1.1.1.2 | Columnes2226TrunkPortMethod | read-write | current | The method of trunk port. 0 : None, 1 : LACP, 2 : Static. |
| 1.3.6.1.4.1.5205.2.31.1.23.1.1.1.3 | Columnes2226TrunkPortGroup | read-write | current | The group(0~12) of trunk port. |
| 1.3.6.1.4.1.5205.2.31.1.23.1.1.1.4 | Columnes2226TrunkPortActiveLacp | read-write | current | The active lacp mode of trunk port. 0 : Passive, 1 : Active. |
| 1.3.6.1.4.1.5205.2.31.1.23.1.1.1.5 | Columnes2226TrunkPortAggtr | read-only | current | The Aggtr of trunk port. |
| 1.3.6.1.4.1.5205.2.31.1.23.1.1.1.6 | Columnes2226TrunkPortStatus | read-only | current | The status of trunk port. 0 : None, 1 : Ready. |
| 1.3.6.1.4.1.5205.2.31.1.23.1.1.1.7 | Columnes2226TrunkPortCurrentMode | read-write | current | The current mode of trunk port entry. 0 : Active mode, 1 : Edit mode, 2 : Do edit. |
| 1.3.6.1.4.1.5205.2.31.1.23.2 | Nodees2226AggregatorView | |||
| 1.3.6.1.4.1.5205.2.31.1.23.2.1 | Tablees2226AggregatorViewTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.23.2.1.1 | Rowes2226AggregatorViewEntry | not-accessible | current | Entry(s) for aggregator view table. |
| 1.3.6.1.4.1.5205.2.31.1.23.2.1.1.1 | Columnes2226AggregatorViewIndex | not-accessible | current | The port index of aggregator view table. |
| 1.3.6.1.4.1.5205.2.31.1.23.2.1.1.2 | Columnes2226AggregatorViewMethod | read-only | current | The method of aggregator view table. 0 : None, 1 : LACP, 2 : Static. |
| 1.3.6.1.4.1.5205.2.31.1.23.2.1.1.3 | Columnes2226AggregatorViewMemberPorts | read-only | current | The member ports of aggregator view table. |
| 1.3.6.1.4.1.5205.2.31.1.23.2.1.1.4 | Columnes2226AggregatorViewReadyPorts | read-only | current | The ready ports of aggregator view table. |
| 1.3.6.1.4.1.5205.2.31.1.23.3 | Nodees2226LacpSystemConfiguration | |||
| 1.3.6.1.4.1.5205.2.31.1.23.3.1 | Scalares2226LacpSystemPriority | read-write | current | The priority of LACP system. |
| 1.3.6.1.4.1.5205.2.31.1.23.3.2 | Scalares2226LacpSystemHashMethod | read-write | current | The hash method of LACP system. 0 : DA and SA 1 : SA 2 : DA 3 : IPv4 DIP 4 : IPv4 SIP 5 : DA, SA, IPv4 DIP and IPv4 SIP |
| 1.3.6.1.4.1.5205.2.31.1.25 | Nodees2226Dhcprelay | |||
| 1.3.6.1.4.1.5205.2.31.1.25.1 | Scalares2226DhcpRelayState | read-write | current | Set DHCP Relay State. 0 : Disable, 1 : Enable. When DHCP or DHCP Snooping is already running. Please disable DHCP or DHCP Snooping first, and then enable DHCP … |
| 1.3.6.1.4.1.5205.2.31.1.25.2 | Scalares2226DhcpRelayLifeTime | read-write | current | Set wait Server reply time. time: from 1 to 10 second(s) |
| 1.3.6.1.4.1.5205.2.31.1.25.3 | Scalares2226DhcpRelayOption82 | read-write | current | Option82 state in Dhcp Relay. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.31.1.25.4 | Scalares2226DhcpRelayOption82Action | read-write | current | The action of the switch which is existing relay information in packets received from DHCP clients. 0 : Replace, 1 : Keep, 2 : Drop. |
| 1.3.6.1.4.1.5205.2.31.1.25.5 | Scalares2226DhcpRelayServerPort | read-write | current | The Dhcp Relay Server Port. Server port cannot exceed more than two ports. |
| 1.3.6.1.4.1.5205.2.31.1.25.6 | Scalares2226DhcpRelayServerIP | read-write | current | Server ip |
| 1.3.6.1.4.1.5205.2.31.1.26 | Nodees2226Multicast | |||
| 1.3.6.1.4.1.5205.2.31.1.26.1 | Nodees2226IgmpSetting | |||
| 1.3.6.1.4.1.5205.2.31.1.26.1.1 | Scalares2226IgmpSnoopingState | read-write | current | Set IGMP Snooping State. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.31.1.26.1.2 | Scalares2226IgmpSnoopingUnregisterMulticastFlooding | read-write | current | Set Unregister Multicast Flooding State. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.31.1.26.1.3 | Scalares2226IgmpSnoopingGeneralQueryInterval | read-write | current | Set general query interval. interval: from 1 to 2000 second(s) |
| 1.3.6.1.4.1.5205.2.31.1.26.1.4 | Scalares2226IgmpSnoopingGeneralQueryMaxResponseTime | read-write | current | Set general query max response time. time: from 1 to 10 second(s) |
| 1.3.6.1.4.1.5205.2.31.1.26.1.5 | Scalares2226IgmpSnoopingGeneralQueryTimeout | read-write | current | Set general query timeout. timeout: from 1 to 30 second(s) |
| 1.3.6.1.4.1.5205.2.31.1.26.1.6 | Scalares2226IgmpSnoopingSpecificQueryCount | read-write | current | Set specific query count. count: from 1 to 10 |
| 1.3.6.1.4.1.5205.2.31.1.26.1.7 | Scalares2226IgmpSnoopingSpecificQueryMaxResponseTime | read-write | current | Set specific query max response time. time: from 1 to 10 second(s) |
| 1.3.6.1.4.1.5205.2.31.1.26.1.8 | Scalares2226IgmpSnoopingSpecificQueryTimeout | read-write | current | Set specific query timeout. timeout: from 1 to 30 second(s) |
| 1.3.6.1.4.1.5205.2.31.1.26.1.9 | Tablees2226IgmpSnoopingSettingTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.26.1.9.1 | Rowes2226IgmpSnoopingSettingEntry | not-accessible | current | Entry(s) for IGMP snooping port setting table. |
| 1.3.6.1.4.1.5205.2.31.1.26.1.9.1.1 | Columnes2226IgmpSnoopingSettingPortIndex | not-accessible | current | The port index of IGMP snooping port setting table. |
| 1.3.6.1.4.1.5205.2.31.1.26.1.9.1.2 | Columnes2226IgmpSnoopingSettingMulticastGroupLimit | read-write | current | Set multicast group limit. Limit range from 0 to 256. |
| 1.3.6.1.4.1.5205.2.31.1.26.1.9.1.3 | Columnes2226IgmpSnoopingSettingIGMPRouter | read-write | current | Set IGMP router. 0 : non-router, 1 : router. |
| 1.3.6.1.4.1.5205.2.31.1.26.2 | Nodees2226IgmpVlan | |||
| 1.3.6.1.4.1.5205.2.31.1.26.2.1 | Scalares2226IgmpVlanNumbers | read-only | current | Total numbers for igmp vlan. |
| 1.3.6.1.4.1.5205.2.31.1.26.2.2 | Scalares2226IgmpVlanCreatStatus | read-write | current | Create IGMP Vlan Vid. Vid: from 1 to 4094 |
| 1.3.6.1.4.1.5205.2.31.1.26.2.3 | Tablees2226IgmpVlanTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.26.2.3.1 | Rowes2226IgmpVlanEntry | not-accessible | current | Entry(s) for Igmp Vlan table. |
| 1.3.6.1.4.1.5205.2.31.1.26.2.3.1.1 | Columnes2226IgmpVlanIndex | not-accessible | current | The entry index of Igmp Vlan table. |
| 1.3.6.1.4.1.5205.2.31.1.26.2.3.1.2 | Columnes2226IgmpVlanVid | read-only | current | The vid of igmp vlan entry. |
| 1.3.6.1.4.1.5205.2.31.1.26.2.3.1.3 | Columnes2226IgmpVlanRowStatus | read-write | current | The row status of igmp vlan entry. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.5205.2.31.1.26.3 | Nodees2226IgmpVlanGroupAllow | |||
| 1.3.6.1.4.1.5205.2.31.1.26.3.1 | Scalares2226IgmpVlanGroupAllowCreatStatus | read-write | current | Create IGMP Group Allow Entry. |
| 1.3.6.1.4.1.5205.2.31.1.26.3.2 | Tablees2226IgmpVlanGroupAllowTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.26.3.2.1 | Rowes2226IgmpVlanGroupAllowEntry | not-accessible | current | Entry(s) for Igmp Group Allow table. |
| 1.3.6.1.4.1.5205.2.31.1.26.3.2.1.1 | Columnes2226IgmpVlanGroupAllowIndex | not-accessible | current | The entry index of Igmp Group Allow table. |
| 1.3.6.1.4.1.5205.2.31.1.26.3.2.1.2 | Columnes2226IgmpVlanGroupAllowStartAddress | read-write | current | Start address of Group Allow entry. |
| 1.3.6.1.4.1.5205.2.31.1.26.3.2.1.3 | Columnes2226IgmpVlanGroupAllowEndAddress | read-write | current | End address of Group Allow entry. |
| 1.3.6.1.4.1.5205.2.31.1.26.3.2.1.4 | Columnes2226IgmpVlanGroupAllowVid | read-write | current | VLAN ID of Group Allow entry. |
| 1.3.6.1.4.1.5205.2.31.1.26.3.2.1.5 | Columnes2226IgmpVlanGroupAllowPortMember | read-write | current | Port Member of Group Allow entry. |
| 1.3.6.1.4.1.5205.2.31.1.26.3.2.1.6 | Columnes2226IgmpVlanGroupAllowRowStatus | read-write | current | The row status of igmp group allow entry. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.5205.2.31.1.26.4 | Nodees2226MvrSetting | |||
| 1.3.6.1.4.1.5205.2.31.1.26.4.1 | Scalares2226MvrSettingMulticastVlanRegistration | read-write | current | Set MVR State. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.31.1.26.4.2 | Scalares2226MvrSettingMulticastVlanIdConf | read-write | current | Get/Set multicast vlan vid. This value whill be kept in buffer. Will be activity after enable Multicast Vlan Registration. vid: from 2 to 4094, 1: reserved for… |
| 1.3.6.1.4.1.5205.2.31.1.26.4.3 | Scalares2226MvrSettingMulticastVlanIdShow | read-only | current | Get the multicast vlan vid real value. vid: from 2 to 4094 |
| 1.3.6.1.4.1.5205.2.31.1.26.4.4 | Tablees2226MvrSettingTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.26.4.4.1 | Rowes2226MvrSettingEntry | not-accessible | current | Entry(s) for MVR port setting table. |
| 1.3.6.1.4.1.5205.2.31.1.26.4.4.1.1 | Columnes2226MvrSettingPort | not-accessible | current | The port index of MVR port setting table. |
| 1.3.6.1.4.1.5205.2.31.1.26.4.4.1.2 | Columnes2226MvrSettingServerType | read-write | current | Set mvr service type. type: 0(None), 1(Client), 2(Router).At least one clent or router port. |
| 1.3.6.1.4.1.5205.2.31.1.26.4.4.1.3 | Columnes2226MvrSettingTagging | read-write | current | Set mvr tagging. 0 : untag-out, 1 : tag-out. |
| 1.3.6.1.4.1.5205.2.31.1.26.5 | Nodees2226MulticastStatus | |||
| 1.3.6.1.4.1.5205.2.31.1.26.5.1 | Tablees2226MulticastStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.31.1.26.5.1.1 | Rowes2226MulticastStatusEntry | not-accessible | current | Entry(s) for Multicast Status table. |
| 1.3.6.1.4.1.5205.2.31.1.26.5.1.1.1 | Columnes2226MulticastStatusIndex | not-accessible | current | The port index of trunk table. |
| 1.3.6.1.4.1.5205.2.31.1.26.5.1.1.2 | Columnes2226MulticastStatusVid | read-only | current | The Vid of multicast status table. |
| 1.3.6.1.4.1.5205.2.31.1.26.5.1.1.3 | Columnes2226MulticastStatusMulticastGroup | read-only | current | The Multicast Group of multicast status table. |
| 1.3.6.1.4.1.5205.2.31.1.26.5.1.1.4 | Columnes2226MulticastStatusPortMember | read-only | current | The Port Member of multicast status table. |
| 1.3.6.1.4.1.5205.2.31.1.26.6 | Nodees2226RadiusIgmpSetting | |||
| 1.3.6.1.4.1.5205.2.31.1.26.6.1 | Scalares2226RadiusIgmpServer1 | read-write | current | Radius Igmp Server1 |
| 1.3.6.1.4.1.5205.2.31.1.26.6.2 | Scalares2226RadiusIgmpPortNumber1 | read-write | current | Set Radius Igmp port number1. port number: from 1 to 65535 |
| 1.3.6.1.4.1.5205.2.31.1.26.6.3 | Scalares2226RadiusIgmpServer2 | read-write | current | Radius Igmp Server2 |
| 1.3.6.1.4.1.5205.2.31.1.26.6.4 | Scalares2226RadiusIgmpPortNumber2 | read-write | current | Set Radius Igmp port number2. port number: from 1 to 65535 |
| 1.3.6.1.4.1.5205.2.31.1.26.6.5 | Scalares2226RadiusIgmpSecretKey1 | read-write | current | Set Radius Igmp secret key1 |
| 1.3.6.1.4.1.5205.2.31.1.26.6.6 | Scalares2226RadiusIgmpAccountingServer1 | read-write | current | Radius Igmp Accounting Server1 |
| 1.3.6.1.4.1.5205.2.31.1.26.6.7 | Scalares2226RadiusIgmpAccountingPortNumber1 | read-write | current | Set Radius Igmp Accounting port number1. port number: from 1 to 65535 |
| 1.3.6.1.4.1.5205.2.31.1.26.6.8 | Scalares2226RadiusIgmpAccountingServer2 | read-write | current | Radius Igmp Accounting Server2 |
| 1.3.6.1.4.1.5205.2.31.1.26.6.9 | Scalares2226RadiusIgmpAccountingPortNumber2 | read-write | current | Set Radius Igmp Accounting port number2. port number: from 1 to 65535 |
| 1.3.6.1.4.1.5205.2.31.1.26.6.10 | Scalares2226RadiusIgmpSecretKey2 | read-write | current | Set Radius Igmp secret key2 |
| 1.3.6.1.4.1.5205.2.31.1.26.6.11 | Scalares2226RadiusIgmpResponseTimeout | read-write | current | Set radius-igmp timeout. time: 2 ~ 60 seconds |
| 1.3.6.1.4.1.5205.2.31.1.26.6.12 | Scalares2226RadiusIgmpNumberOfRetry | read-write | current | Set radius-igmp number of retry. value: 0 ~ 10 times |
| 1.3.6.1.4.1.5205.2.31.1.26.6.13 | Scalares2226RadiusIgmpPortMember | read-write | current | The Port Member of Radius Igmp. 0: no port member |