RUBYTECH-ES2310C-MIB
460 objects
The MIB module for Ruby Tech.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5205 | Identityrubytech | The MIB module for Ruby Tech. | ||
| 1.3.6.1.4.1.5205.2 | Nodeswitch | |||
| 1.3.6.1.4.1.5205.2.23 | Nodees2310cProductID | |||
| 1.3.6.1.4.1.5205.2.23.1 | Nodees2310cProduces | |||
| 1.3.6.1.4.1.5205.2.23.1.1 | Nodees2310cSystem | |||
| 1.3.6.1.4.1.5205.2.23.1.1.1 | Nodees2310cCommonSys | |||
| 1.3.6.1.4.1.5205.2.23.1.1.1.1 | Scalares2310cReboot | read-write | current | reboot the system. Get this oid always return zero. 0 - do nothing 1 - reboot without saving start 2 - reboot with saving start |
| 1.3.6.1.4.1.5205.2.23.1.1.1.2 | Scalares2310cBiosVsersion | read-only | current | Get the BIOS version of the system. |
| 1.3.6.1.4.1.5205.2.23.1.1.1.3 | Scalares2310cFirmwareVersion | read-only | current | Get the firmware version of the system. |
| 1.3.6.1.4.1.5205.2.23.1.1.1.4 | Scalares2310cHardwareVersion | read-only | current | Get the hardware version of the system. |
| 1.3.6.1.4.1.5205.2.23.1.1.1.5 | Scalares2310cMechanicalVersion | read-only | current | Get the mechanical version of the system. |
| 1.3.6.1.4.1.5205.2.23.1.1.1.6 | Scalares2310cSerialNumber | read-only | current | Get the serial number of the system. |
| 1.3.6.1.4.1.5205.2.23.1.1.1.7 | Scalares2310cHostMacAddress | read-only | current | Get the MAC address of the system. |
| 1.3.6.1.4.1.5205.2.23.1.1.1.8 | Scalares2310cDevicePort | read-only | current | Get the quantity of ports that this system owns now. |
| 1.3.6.1.4.1.5205.2.23.1.1.1.9 | Scalares2310cRamSize | read-only | current | Get the RAM size of the system. |
| 1.3.6.1.4.1.5205.2.23.1.1.1.10 | Scalares2310cFlashSize | read-only | current | Get the flash size of the system. |
| 1.3.6.1.4.1.5205.2.23.1.1.1.11 | Scalares2310cSystemDescription | read-only | current | Get the system description. |
| 1.3.6.1.4.1.5205.2.23.1.1.1.12 | Scalares2310cDeviceName | read-write | current | Get/Set the device Name. |
| 1.3.6.1.4.1.5205.2.23.1.1.2 | Nodees2310cIP | |||
| 1.3.6.1.4.1.5205.2.23.1.1.2.1 | Scalares2310cDhcpSetting | read-write | current | Get/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enable |
| 1.3.6.1.4.1.5205.2.23.1.1.2.2 | Scalares2310cIPAddress | read-write | current | Get/Set the IP address of the system. Can't Set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.23.1.1.2.3 | Scalares2310cNetMask | read-write | current | Get/Set the netmask of the system. Can't Set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.23.1.1.2.4 | Scalares2310cDefaultGateway | read-write | current | Get/Set the default gateway of the system. Can't Set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.23.1.1.2.5 | Scalares2310cDnsSetting | read-write | current | Get/Set the source of DNS server. Can't Set this OID if DHCP status is disabled. 0 - manual, the DNS server is from manual setting 1 - auto, the DNS server is … |
| 1.3.6.1.4.1.5205.2.23.1.1.2.6 | Scalares2310cDnsServer | read-write | current | Get/Set the DNS server of the system. |
| 1.3.6.1.4.1.5205.2.23.1.1.3 | Nodees2310cTime | |||
| 1.3.6.1.4.1.5205.2.23.1.1.3.1 | Scalares2310cSystemCurrentTime | read-only | current | Get the current time in the system. |
| 1.3.6.1.4.1.5205.2.23.1.1.3.2 | Scalares2310cManualTimeSetting | read-write | current | Get/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25 . value range: … |
| 1.3.6.1.4.1.5205.2.23.1.1.3.3 | Scalares2310cNTPServer | read-write | current | Get/Set the NTP Time Server. You can use the IP address or domain name. |
| 1.3.6.1.4.1.5205.2.23.1.1.3.4 | Scalares2310cNTPTimeZone | read-write | current | Get/Set the NTP Time Zone. value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - GMT -… |
| 1.3.6.1.4.1.5205.2.23.1.1.3.5 | Scalares2310cNTPTimeSync | read-write | current | Sync time from NTP Server. Get this oid always return zero. Setting the Time Server and Time Zone before doing time sync. Notice that time server must be corre… |
| 1.3.6.1.4.1.5205.2.23.1.1.3.6 | Scalares2310cDaylightSavingTime | read-write | current | Get/Set the daylight saving time. value range is between -5 and 5. unit: hour. |
| 1.3.6.1.4.1.5205.2.23.1.1.3.7 | Scalares2310cDaylightStartTime | read-write | current | Get/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 10/01… |
| 1.3.6.1.4.1.5205.2.23.1.1.3.8 | Scalares2310cDaylightEndTime | read-write | current | Get/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 04/01/0… |
| 1.3.6.1.4.1.5205.2.23.1.1.4 | Nodees2310cAccount | |||
| 1.3.6.1.4.1.5205.2.23.1.1.4.1 | Scalares2310cAccountNumber | read-only | current | Get the current account number(s) of the system. |
| 1.3.6.1.4.1.5205.2.23.1.1.4.2 | Tablees2310cAccountTable | not-accessible | current | A list of es2310cAccountEntry. The number of entries are given by the value of es2310cAccountNumber. |
| 1.3.6.1.4.1.5205.2.23.1.1.4.2.1 | Rowes2310cAccountEntry | not-accessible | current | Entry(s) for account information. |
| 1.3.6.1.4.1.5205.2.23.1.1.4.2.1.1 | Columnes2310cAccountIndex | read-only | current | The index of the account entry. |
| 1.3.6.1.4.1.5205.2.23.1.1.4.2.1.2 | Columnes2310cAccountAuthorization | read-only | current | The authorization of the account entry. |
| 1.3.6.1.4.1.5205.2.23.1.1.4.2.1.3 | Columnes2310cAccountName | read-write | current | The username of the account entry. |
| 1.3.6.1.4.1.5205.2.23.1.1.4.2.1.4 | Columnes2310cAccountPassword | read-write | current | The password of the account entry. The return value is always '********'. |
| 1.3.6.1.4.1.5205.2.23.1.1.4.3 | Scalares2310cAccountAddName | read-write | current | The account name for adding operation. |
| 1.3.6.1.4.1.5205.2.23.1.1.4.4 | Scalares2310cAccountAddPassword | read-write | current | The account password for adding operation. The return value is always '********'. |
| 1.3.6.1.4.1.5205.2.23.1.1.4.5 | Scalares2310cDoAccountAdd | read-write | current | Add account name. OID es2310cAccountAddName and es2310cAccountAddPassword must be filled first. Get this oid always return zero. 1 - add account. 0 - do nothin… |
| 1.3.6.1.4.1.5205.2.23.1.1.4.6 | Scalares2310cAccountDel | read-write | current | Delete account. The value is valid es2310cAccountIndex(Can't delete administrator). |
| 1.3.6.1.4.1.5205.2.23.1.2 | Nodees2310cSnmp | |||
| 1.3.6.1.4.1.5205.2.23.1.2.1 | Scalares2310cGetCommunity | read-write | current | Get/Set the get-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.23.1.2.2 | Scalares2310cSetCommunity | read-write | current | Get/Set the set-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.23.1.2.3 | Scalares2310cTrapHostNumber | read-only | current | Get the number of trap hosts. |
| 1.3.6.1.4.1.5205.2.23.1.2.4 | Tablees2310cTrapHostTable | not-accessible | current | A list of trap host entry. The number of entries are given by the value of es2310cTrapHostNumber. |
| 1.3.6.1.4.1.5205.2.23.1.2.4.1 | Rowes2310cTrapHostEntry | not-accessible | current | Entry information for trap host. |
| 1.3.6.1.4.1.5205.2.23.1.2.4.1.1 | Columnes2310cTrapHostIndex | read-only | current | The index of the trap host entry. |
| 1.3.6.1.4.1.5205.2.23.1.2.4.1.2 | Columnes2310cTrapHostIP | read-write | current | The IP of the trap host. |
| 1.3.6.1.4.1.5205.2.23.1.2.4.1.3 | Columnes2310cTrapHostPort | read-write | current | The receiving-port number of the trap host. |
| 1.3.6.1.4.1.5205.2.23.1.2.4.1.4 | Columnes2310cTrapHostCommunity | read-write | current | The community name for the trap PDU. |
| 1.3.6.1.4.1.5205.2.23.1.2.8 | Scalares2310cTrapBootDelayTime | read-write | current | Get/Set trap boot delay time in second. Default: 0 |
| 1.3.6.1.4.1.5205.2.23.1.3 | Nodees2310cAlarm | |||
| 1.3.6.1.4.1.5205.2.23.1.3.1 | Nodees2310cEvent | |||
| 1.3.6.1.4.1.5205.2.23.1.3.1.1 | Scalares2310cEventNumber | read-only | current | Get the total number of alarm events. |
| 1.3.6.1.4.1.5205.2.23.1.3.1.2 | Tablees2310cEventTable | not-accessible | current | A list of alarm event entry. The number of entries are given by the value of es2310cEventNumber. |
| 1.3.6.1.4.1.5205.2.23.1.3.1.2.1 | Rowes2310cEventEntry | not-accessible | current | Entry information for alarm event. |
| 1.3.6.1.4.1.5205.2.23.1.3.1.2.1.1 | Columnes2310cEventIndex | read-only | current | The index of the alarm event entry. |
| 1.3.6.1.4.1.5205.2.23.1.3.1.2.1.2 | Columnes2310cEventName | read-only | current | The alarm event name. |
| 1.3.6.1.4.1.5205.2.23.1.3.1.2.1.3 | Columnes2310cEventSendEmail | read-write | current | Send email when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.23.1.3.1.2.1.4 | Columnes2310cEventSendTrap | read-write | current | Send trap when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.23.1.3.2 | Nodees2310cEmail | |||
| 1.3.6.1.4.1.5205.2.23.1.3.2.1 | Scalares2310cEmailServer | read-write | current | SMTP server for alarm event. |
| 1.3.6.1.4.1.5205.2.23.1.3.2.2 | Scalares2310cEmailUsername | read-write | current | Username of smtp server. |
| 1.3.6.1.4.1.5205.2.23.1.3.2.3 | Scalares2310cEmailPassword | read-write | current | User password of smtp server. |
| 1.3.6.1.4.1.5205.2.23.1.3.2.4 | Scalares2310cEmailSender | read-write | current | This is the Sender of SMTP server. |
| 1.3.6.1.4.1.5205.2.23.1.3.2.5 | Scalares2310cEmailReturnPath | read-write | current | This is the return path of mail. |
| 1.3.6.1.4.1.5205.2.23.1.3.2.6 | Scalares2310cEmailUserNumber | read-only | current | The number of the email users that you want to send the alarm notification. |
| 1.3.6.1.4.1.5205.2.23.1.3.2.7 | Tablees2310cEmailUserTable | not-accessible | current | A list of email user entry. The number of entries are given by the value of es2310cEmailUserNumber. |
| 1.3.6.1.4.1.5205.2.23.1.3.2.7.1 | Rowes2310cEmailUserEntry | not-accessible | current | Entry information for email user entry. |
| 1.3.6.1.4.1.5205.2.23.1.3.2.7.1.1 | Columnes2310cEmailUserIndex | read-only | current | The index of the email user entry. |
| 1.3.6.1.4.1.5205.2.23.1.3.2.7.1.2 | Columnes2310cEmailUserAddress | read-write | current | The email address of the email user entry. |
| 1.3.6.1.4.1.5205.2.23.1.4 | Nodees2310cTftp | |||
| 1.3.6.1.4.1.5205.2.23.1.4.1 | Scalares2310cTftpServer | read-write | current | Get/Set the tftp server. |
| 1.3.6.1.4.1.5205.2.23.1.5 | Nodees2310cConfiguration | |||
| 1.3.6.1.4.1.5205.2.23.1.5.1 | Nodees2310cSaveRestore | |||
| 1.3.6.1.4.1.5205.2.23.1.5.1.1 | Scalares2310cSaveStart | read-write | current | Save current configuration into flash memory (start section). Get this oid always return zero. 1 - save. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.23.1.5.1.2 | Scalares2310cSaveUser | read-write | current | Save current configuration into flash memory (user config section). Get this oid always return zero. 1 - save. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.23.1.5.1.3 | Scalares2310cRestoreDefault | read-write | current | Restore factory default configuration. Get this oid always return zero. 2 - restore default included default ip address. 1 - restore default without changing c… |
| 1.3.6.1.4.1.5205.2.23.1.5.1.4 | Scalares2310cRestoreUser | read-write | current | Restore user configuration. Get this oid always return zero. 1 - restore. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.23.1.5.2 | Nodees2310cConfigFile | |||
| 1.3.6.1.4.1.5205.2.23.1.5.2.1 | Scalares2310cExportConfigName | read-write | current | Get/Set export config file path and name. |
| 1.3.6.1.4.1.5205.2.23.1.5.2.2 | Scalares2310cDoExportConfig | read-write | current | Do export-config. Get this oid always return zero. 1 - export start section. 2 - export user-conf section. |
| 1.3.6.1.4.1.5205.2.23.1.5.2.3 | Scalares2310cImportConfigName | read-write | current | Get/Set export config file path and name. |
| 1.3.6.1.4.1.5205.2.23.1.5.2.4 | Scalares2310cDoImportConfig | read-write | current | Do import-config. Get this oid always return zero. 1 - import start section. 2 - import user-conf section. |
| 1.3.6.1.4.1.5205.2.23.1.6 | Nodees2310cDiagnostic | |||
| 1.3.6.1.4.1.5205.2.23.1.6.1 | Scalares2310cEEPROMTest | read-only | current | EEPROM access test. |
| 1.3.6.1.4.1.5205.2.23.1.6.2 | Scalares2310cUartTest | read-only | current | UART access test. |
| 1.3.6.1.4.1.5205.2.23.1.6.3 | Scalares2310cDramTest | read-only | current | DRAM access test. |
| 1.3.6.1.4.1.5205.2.23.1.6.4 | Scalares2310cFlashTest | read-only | current | Flash memory access test. |
| 1.3.6.1.4.1.5205.2.23.1.6.5 | Scalares2310cInternalLoopbackTest | read-only | current | Internal loopback test. |
| 1.3.6.1.4.1.5205.2.23.1.6.6 | Scalares2310cExternalLoopbackTest | read-only | current | External loopback test. |
| 1.3.6.1.4.1.5205.2.23.1.6.7 | Scalares2310cPingTest | read-write | current | Set the host address that you want to ping and the system will return the test result. |
| 1.3.6.1.4.1.5205.2.23.1.7 | Nodees2310cLog | |||
| 1.3.6.1.4.1.5205.2.23.1.7.1 | Scalares2310cClearLog | read-write | current | Clear system log. Get this oid always return zero. 1 - clear log. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.23.1.7.2 | Scalares2310cUploadLog | read-write | current | Upload current system log. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this oid always return zero.… |
| 1.3.6.1.4.1.5205.2.23.1.7.3 | Scalares2310cAutoUploadLogState | read-write | current | Enable log auto-upload function. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this oid always return… |
| 1.3.6.1.4.1.5205.2.23.1.7.4 | Scalares2310cLogNumber | read-only | current | Get the number of current system log. |
| 1.3.6.1.4.1.5205.2.23.1.7.5 | Tablees2310cLogTable | not-accessible | current | A list of log entry. The number of entries are given by the value of es2310cLogNumber. |
| 1.3.6.1.4.1.5205.2.23.1.7.5.1 | Rowes2310cLogEntry | not-accessible | current | Entry information for system log. |
| 1.3.6.1.4.1.5205.2.23.1.7.5.1.1 | Columnes2310cLogIndex | read-only | current | The index of the log entry. |
| 1.3.6.1.4.1.5205.2.23.1.7.5.1.2 | Columnes2310cLogEvent | read-only | current | The detail information of the log entry. |
| 1.3.6.1.4.1.5205.2.23.1.8 | Nodees2310cFirmware | |||
| 1.3.6.1.4.1.5205.2.23.1.8.1 | Scalares2310cFirmwareFileName | read-write | current | Get/Set the path and filename for firmware upgrading. |
| 1.3.6.1.4.1.5205.2.23.1.8.2 | Scalares2310cDoFirmwareUpgrade | read-write | current | Do firmware upgrade. Get this oid always return zero. 1 - do firmware upgrade. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.23.1.9 | Nodees2310cPort | |||
| 1.3.6.1.4.1.5205.2.23.1.9.1 | Nodees2310cPortStatus | |||
| 1.3.6.1.4.1.5205.2.23.1.9.1.1 | Scalares2310cPortStatusNumber | read-only | current | Get the number of port state. |
| 1.3.6.1.4.1.5205.2.23.1.9.1.2 | Tablees2310cPortStatusTable | not-accessible | current | A list of port status entry. The number of entries are given by the value of es2310cPortStatusNumber. |
| 1.3.6.1.4.1.5205.2.23.1.9.1.2.1 | Rowes2310cPortStatusEntry | not-accessible | current | Entry(s) for port status information. |
| 1.3.6.1.4.1.5205.2.23.1.9.1.2.1.1 | Columnes2310cPortStatusIndex | read-only | current | The index of the port status entry. |
| 1.3.6.1.4.1.5205.2.23.1.9.1.2.1.2 | Columnes2310cPortStatusMedia | read-only | current | The port media type of the port status entry. |
| 1.3.6.1.4.1.5205.2.23.1.9.1.2.1.3 | Columnes2310cPortStatusLink | read-only | current | The port link of the port status entry. |
| 1.3.6.1.4.1.5205.2.23.1.9.1.2.1.4 | Columnes2310cPortStatusPortState | read-only | current | The port state of the port status entry. |
| 1.3.6.1.4.1.5205.2.23.1.9.1.2.1.5 | Columnes2310cPortStatusAutoNego | read-only | current | The auto negotiation of the port status entry. |
| 1.3.6.1.4.1.5205.2.23.1.9.1.2.1.6 | Columnes2310cPortStatusSpdDpx | read-only | current | The speed/duplex of the port status entry. |
| 1.3.6.1.4.1.5205.2.23.1.9.1.2.1.7 | Columnes2310cPortStatusRxPause | read-only | current | The Rx Pause of the port status entry. |
| 1.3.6.1.4.1.5205.2.23.1.9.1.2.1.8 | Columnes2310cPortStatusTxPause | read-only | current | The Tx Pause of the port status entry. |
| 1.3.6.1.4.1.5205.2.23.1.9.1.2.1.9 | Columnes2310cPortStatusDescription | read-only | current | The description of port. |
| 1.3.6.1.4.1.5205.2.23.1.9.2 | Nodees2310cPortConf | |||
| 1.3.6.1.4.1.5205.2.23.1.9.2.1 | Scalares2310cPortConfNumber | read-only | current | Get the number of port configuration. |
| 1.3.6.1.4.1.5205.2.23.1.9.2.2 | Tablees2310cPortConfTable | not-accessible | current | A list of port configuration entry. The number of entries are given by the value of es2310cPortConfNumber. |
| 1.3.6.1.4.1.5205.2.23.1.9.2.2.1 | Rowes2310cPortConfEntry | not-accessible | current | Entry(s) for port configuration information. |
| 1.3.6.1.4.1.5205.2.23.1.9.2.2.1.1 | Columnes2310cPortConfIndex | read-only | current | The index of the port configuration entry. |
| 1.3.6.1.4.1.5205.2.23.1.9.2.2.1.2 | Columnes2310cPortConfPortState | read-write | current | The port state of the port configuration entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.23.1.9.2.2.1.3 | Columnes2310cPortConfSpdDpx | read-write | current | The speed/duplex of the port configuration entry. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/Full. 5 - 1G/Full. |
| 1.3.6.1.4.1.5205.2.23.1.9.2.2.1.4 | Columnes2310cPortConfFlwCtrl | read-write | current | The flow control of the port configuration entry. 0 - asymmetric. 1 - symmetric. |
| 1.3.6.1.4.1.5205.2.23.1.9.2.2.1.5 | Columnes2310cPortConfDescription | read-write | current | The description of port. |
| 1.3.6.1.4.1.5205.2.23.1.9.3 | Nodees2310cPortBandwidth | |||
| 1.3.6.1.4.1.5205.2.23.1.9.3.1 | Tablees2310cPortBandwidthTable | not-accessible | current | This is a list of port bandwidth entry. |
| 1.3.6.1.4.1.5205.2.23.1.9.3.1.1 | Rowes2310cPortBandwidthEntry | not-accessible | current | This is the Entry(s) for port bandwidth configuration. |
| 1.3.6.1.4.1.5205.2.23.1.9.3.1.1.1 | Columnes2310cPortBandwidthIndex | read-only | current | This is the index of the port bandwidth entry. |
| 1.3.6.1.4.1.5205.2.23.1.9.3.1.1.2 | Columnes2310cPortBandwidthIngressRate | read-write | current | Get/Set the port bandwidth ingress rate. Fast Ethernet port range: 66~102400(Kb) Gigabit Ethernet port range: 66~1024000(Kb) |
| 1.3.6.1.4.1.5205.2.23.1.9.3.1.1.3 | Columnes2310cPortBandwidthEgressRate | read-write | current | Get/Set the port bandwidth egress rate. Fast Ethernet port range: 66~102400(Kb) Gigabit Ethernet port range: 66~1024000(Kb) |
| 1.3.6.1.4.1.5205.2.23.1.9.3.2 | Scalares2310cPortBandwidthStormType | read-write | current | This is the bandwidth storm type. 0:Disable 1:Broadcast Storm Control 2:Multicast Storm Control 3:Unknown Unicast Storm Control 4:Broadcast, Multicast, and Unk… |
| 1.3.6.1.4.1.5205.2.23.1.9.3.3 | Scalares2310cPortBandwidthStormRate | read-write | current | This is the storm rate. |
| 1.3.6.1.4.1.5205.2.23.1.9.4 | Nodees2310cPortSFPInfo | |||
| 1.3.6.1.4.1.5205.2.23.1.9.4.1 | Scalares2310cPortSFPInfoNumber | read-only | current | Get the number of sfp info entry. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2 | Tablees2310cPortSFPInfoTable | not-accessible | current | A list of sfp info entry. The numbers of entries are given by the value of es2310cPortSFPInfoNumber. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2.1 | Rowes2310cPortSFPInfoEntry | not-accessible | current | Entry(s) for SFP information. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2.1.1 | Columnes2310cPortSFPInfoIndex | read-only | current | The index of the sfp info entry. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2.1.2 | Columnes2310cPortSFPConnectorType | read-only | current | Get connector type of the sfp. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2.1.3 | Columnes2310cPortSFPFiberType | read-only | current | Get fiber type of the sfp. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2.1.4 | Columnes2310cPortSFPWavelength | read-only | current | Get tx central wavelength of the sfp. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2.1.5 | Columnes2310cPortSFPBaudRate | read-only | current | Get baud rate of the sfp. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2.1.6 | Columnes2310cPortSFPVendorOUI | read-only | current | Get vendor OUI of the sfp. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2.1.7 | Columnes2310cPortSFPVendorName | read-only | current | Get vendor name of the sfp. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2.1.8 | Columnes2310cPortSFPVendorPN | read-only | current | Get vendor part number of the sfp. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2.1.9 | Columnes2310cPortSFPVendorRev | read-only | current | Get vendor revision number of the sfp. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2.1.10 | Columnes2310cPortSFPVendorSN | read-only | current | Get vendor serial number of the sfp. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2.1.11 | Columnes2310cPortSFPDateCode | read-only | current | Get data code of the sfp. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2.1.12 | Columnes2310cPortSFPTemperature | read-only | current | Get current temperature of the sfp. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2.1.13 | Columnes2310cPortSFPVcc | read-only | current | Get current internal supply voltage of the sfp. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2.1.14 | Columnes2310cPortSFPTxBias | read-only | current | Get current TX Bias of the sfp. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2.1.15 | Columnes2310cPortSFPTxPWR | read-only | current | Get current TX output power of the sfp. |
| 1.3.6.1.4.1.5205.2.23.1.9.4.2.1.16 | Columnes2310cPortSFPRxPWR | read-only | current | Get current Received Power of the sfp. |
| 1.3.6.1.4.1.5205.2.23.1.10 | Nodees2310cLoopDetectedConf | |||
| 1.3.6.1.4.1.5205.2.23.1.10.1 | Scalares2310cLoopDetectedNumber | read-only | current | Get the number of loop detected entry. |
| 1.3.6.1.4.1.5205.2.23.1.10.2 | Tablees2310cLoopDetectedTable | not-accessible | current | A list of loop detected entry. The number of entries are given by the value of es2310cLoopDetectedNumber. |
| 1.3.6.1.4.1.5205.2.23.1.10.2.1 | Rowes2310cLoopDetectedEntry | not-accessible | current | Entry(s) for loop detected information. |
| 1.3.6.1.4.1.5205.2.23.1.10.2.1.1 | Columnes2310cLoopDetectedfIndex | read-only | current | The index of the loop detected entry. |
| 1.3.6.1.4.1.5205.2.23.1.10.2.1.2 | Columnes2310cLoopDetectedStateEbl | read-write | current | The state of the loop detected entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.23.1.10.2.1.3 | Columnes2310cLoopDetectedCurrentStatus | read-only | current | The current status of the loop detected port. 0 - unlocked 1 - locked due to the loop condition |
| 1.3.6.1.4.1.5205.2.23.1.10.2.1.4 | Columnes2310cLoopDetectedResumed | read-write | current | unlock the port which is locked due to loop condition. Get this oid always return zero. 1 - unlock the port, 0 - do nothing |
| 1.3.6.1.4.1.5205.2.23.1.10.3 | Scalares2310cLoopDetectedAction | read-write | current | Set the corresponding action while loop is detected. 1 - locked the loop port, 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.23.1.11 | Nodees2310cMacTableInfo | |||
| 1.3.6.1.4.1.5205.2.23.1.11.1 | Nodees2310cMacTableMaintenance | |||
| 1.3.6.1.4.1.5205.2.23.1.11.1.1 | Scalares2310cMacTableAgingTime | read-write | current | Set the Mac Table Aging Time (10~1000000 Secs). 0 : Disable. |
| 1.3.6.1.4.1.5205.2.23.1.11.1.2 | Scalares2310cMacTableFlush | read-write | current | 1 : Flush Mac Table. |
| 1.3.6.1.4.1.5205.2.23.1.11.1.3 | Tablees2310cMacTableLearnPortLimitTable | not-accessible | current | This is a list of MAC Learning Limitentry. |
| 1.3.6.1.4.1.5205.2.23.1.11.1.3.1 | Rowes2310cMacTableLearnPortLimitEntry | not-accessible | current | Entry(s) for Mac Table Port Learning Limit. |
| 1.3.6.1.4.1.5205.2.23.1.11.1.3.1.1 | Columnes2310cMacTableLearnPortLimitIndex | not-accessible | current | The index of the Mac Table Learning Limit entry. |
| 1.3.6.1.4.1.5205.2.23.1.11.1.3.1.2 | Columnes2310cMacTableLearnPortLimit | read-write | current | Port Learning Limit (0~8191). |
| 1.3.6.1.4.1.5205.2.23.1.11.3 | Nodees2310cMacTableStaticMac | |||
| 1.3.6.1.4.1.5205.2.23.1.11.3.1 | Scalares2310cMacTableStaticMacNumber | read-only | current | This is number of static Mac table entry |
| 1.3.6.1.4.1.5205.2.23.1.11.3.2 | Scalares2310cMacTableStaticMacEntryCreate | read-write | current | Creat a static mac entry. Set 1: add a new entry, Get: the number means index. |
| 1.3.6.1.4.1.5205.2.23.1.11.3.3 | Tablees2310cMacTableStaticMacTable | not-accessible | current | This is a list of static MAC table. |
| 1.3.6.1.4.1.5205.2.23.1.11.3.3.1 | Rowes2310cMacTableStaticMacEntry | not-accessible | current | Entry(s) for Static Mac Table. |
| 1.3.6.1.4.1.5205.2.23.1.11.3.3.1.1 | Columnes2310cMacTableStaticMacIndex | not-accessible | current | The index of the static Mac Table. |
| 1.3.6.1.4.1.5205.2.23.1.11.3.3.1.2 | Columnes2310cMacTableStaticMacAddress | read-write | current | The mac address of the static mac table entry. |
| 1.3.6.1.4.1.5205.2.23.1.11.3.3.1.3 | Columnes2310cMacTableStaticMacVid | read-write | current | The vlan id of the static mac table entry. |
| 1.3.6.1.4.1.5205.2.23.1.11.3.3.1.4 | Columnes2310cMacTableStaticMacQueue | read-write | current | The queue of the static mac table entry. |
| 1.3.6.1.4.1.5205.2.23.1.11.3.3.1.5 | Columnes2310cMacTableStaticMacFwRule | read-write | current | The forwarding rule of the static mac table entry. 0 : static 1 : Static with Destination Drop 2 : Static with Source Drop |
| 1.3.6.1.4.1.5205.2.23.1.11.3.3.1.6 | Columnes2310cMacTableStaticMacPort | read-write | current | The port of the static mac table entry. |
| 1.3.6.1.4.1.5205.2.23.1.11.3.3.1.7 | Columnes2310cMacTableStaticMacEntryAction | read-write | current | The action of the static mac table entry. 1:action 2:non-action 3:delete |
| 1.3.6.1.4.1.5205.2.23.1.11.4 | Nodees2310cMacTableMacAlias | |||
| 1.3.6.1.4.1.5205.2.23.1.11.4.1 | Scalares2310cMacTableMacAliasNumber | read-only | current | This is number of static Mac table entry |
| 1.3.6.1.4.1.5205.2.23.1.11.4.2 | Scalares2310cMacTableMacAliasEntryCreate | read-write | current | Creat a static mac alias entry. Set 1: add a new entry, Get: the number means index. |
| 1.3.6.1.4.1.5205.2.23.1.11.4.3 | Tablees2310cMacTableMacAliasTable | not-accessible | current | This is a list of MAC Alias table. |
| 1.3.6.1.4.1.5205.2.23.1.11.4.3.1 | Rowes2310cMacTableMacAliasEntry | not-accessible | current | Entry(s) for Alias Mac Table. |
| 1.3.6.1.4.1.5205.2.23.1.11.4.3.1.1 | Columnes2310cMacTableMacAliasIndex | not-accessible | current | The index of the Alias Mac Table. |
| 1.3.6.1.4.1.5205.2.23.1.11.4.3.1.2 | Columnes2310cMacTableMacAliasAddress | read-write | current | The Mac address of the Alias Mac Table. |
| 1.3.6.1.4.1.5205.2.23.1.11.4.3.1.3 | Columnes2310cMacTableMacAliasAlias | read-write | current | The Mac Alias of the Alias Mac Table. |
| 1.3.6.1.4.1.5205.2.23.1.11.4.3.1.4 | Columnes2310cMacTableMacAliasEntryAction | read-write | current | The action of the alias mac table entry. 1:action 2:non-action 3:delete |
| 1.3.6.1.4.1.5205.2.23.1.12 | Nodees2310cGVRPInfo | |||
| 1.3.6.1.4.1.5205.2.23.1.12.1 | Nodees2310cGvrpConf | |||
| 1.3.6.1.4.1.5205.2.23.1.12.1.1 | Scalares2310cGvrpConfState | read-write | current | The state of GVRP. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.23.1.12.1.2 | Tablees2310cGvrpConfTable | not-accessible | current | This is a list of the GVRP conf table. |
| 1.3.6.1.4.1.5205.2.23.1.12.1.2.1 | Rowes2310cGvrpConfEntry | not-accessible | current | Entry(s) for the GVRP conf table. |
| 1.3.6.1.4.1.5205.2.23.1.12.1.2.1.1 | Columnes2310cGvrpConfIndex | not-accessible | current | The index of the GVRP conf table. |
| 1.3.6.1.4.1.5205.2.23.1.12.1.2.1.2 | Columnes2310cGvrpConfJoinTime | read-write | current | The join time of the GVRP entry. range: 20~100 default 20 centisecond |
| 1.3.6.1.4.1.5205.2.23.1.12.1.2.1.3 | Columnes2310cGvrpConfLeaveTime | read-write | current | The leave time of the GVRP entry. range: 60~300 default:60 centisecond |
| 1.3.6.1.4.1.5205.2.23.1.12.1.2.1.4 | Columnes2310cGvrpConfLeaveAllTime | read-write | current | The leave all time of the GVRP entry. range: 1000~5000 default: 1000 unit time |
| 1.3.6.1.4.1.5205.2.23.1.12.1.2.1.5 | Columnes2310cGvrpConfDefaultAppMode | read-write | current | The default application mode of the GVRP entry. 0 - Normal 1 - Non-Participant default: Normal |
| 1.3.6.1.4.1.5205.2.23.1.12.1.2.1.6 | Columnes2310cGvrpConfDefaultRegMode | read-write | current | The default registrar mode of the GVRP entry. 0 - Normal 1 - Fixed 2 - Forbidden default: Normal |
| 1.3.6.1.4.1.5205.2.23.1.12.1.2.1.7 | Columnes2310cGvrpConfRestrictedMode | read-write | current | The restricted mode of the GVRP entry. 0 - Disable 1 - Enable default: Disable |
| 1.3.6.1.4.1.5205.2.23.1.12.2 | Nodees2310cGvrpCounter | |||
| 1.3.6.1.4.1.5205.2.23.1.12.2.1 | Tablees2310cGvrpCounterTable | not-accessible | current | This is a list of the GVRP counter table. |
| 1.3.6.1.4.1.5205.2.23.1.12.2.1.1 | Rowes2310cGvrpCounterEntry | not-accessible | current | Entry(s) for the GVRP counter table. |
| 1.3.6.1.4.1.5205.2.23.1.12.2.1.1.1 | Columnes2310cGvrpCounterIndex | not-accessible | current | The port index of the GVRP counter table. |
| 1.3.6.1.4.1.5205.2.23.1.12.2.1.1.2 | Columnes2310cGvrpCounterRxTotalGvrpPkts | read-only | current | This is Rx Total GVRP packet counters. |
| 1.3.6.1.4.1.5205.2.23.1.12.2.1.1.3 | Columnes2310cGvrpCounterRxInvalidGvrpPkts | read-only | current | This is Rx Invalid GVRP packet counters. |
| 1.3.6.1.4.1.5205.2.23.1.12.2.1.1.4 | Columnes2310cGvrpCounterRxLeaveAllMsg | read-only | current | This is Rx LeaveAll message packet counters. |
| 1.3.6.1.4.1.5205.2.23.1.12.2.1.1.5 | Columnes2310cGvrpCounterRxJoinEmptyMsg | read-only | current | This is Rx JoinEmpty message packet counters. |
| 1.3.6.1.4.1.5205.2.23.1.12.2.1.1.6 | Columnes2310cGvrpCounterRxJoinInMsg | read-only | current | This is Rx JoinIn message packet counters. |
| 1.3.6.1.4.1.5205.2.23.1.12.2.1.1.7 | Columnes2310cGvrpCounterRxLeaveEmptyMsg | read-only | current | This is Rx LeaveEmpty message packet counters. |
| 1.3.6.1.4.1.5205.2.23.1.12.2.1.1.8 | Columnes2310cGvrpCounterRxEmptyMsg | read-only | current | This is Rx Empty message packet counters. |
| 1.3.6.1.4.1.5205.2.23.1.12.2.1.1.9 | Columnes2310cGvrpCounterTxTotalGvrpPkts | read-only | current | This is Tx Total GVRP packet counters. |
| 1.3.6.1.4.1.5205.2.23.1.12.2.1.1.10 | Columnes2310cGvrpCounterTxLeaveAllMsg | read-only | current | This is Tx LeaveAll message packet counters. |
| 1.3.6.1.4.1.5205.2.23.1.12.2.1.1.11 | Columnes2310cGvrpCounterTxJoinEmptyMsg | read-only | current | This is Tx JoinEmpty message packet counters. |
| 1.3.6.1.4.1.5205.2.23.1.12.2.1.1.12 | Columnes2310cGvrpCounterTxJoinInMsg | read-only | current | This is Tx JoinIn message packet counters. |
| 1.3.6.1.4.1.5205.2.23.1.12.2.1.1.13 | Columnes2310cGvrpCounterTxLeaveEmptyMsg | read-only | current | This is Tx LeaveEmpty message packet counters. |
| 1.3.6.1.4.1.5205.2.23.1.12.2.1.1.14 | Columnes2310cGvrpCounterTxEmptyMsg | read-only | current | This is Tx Empty message packet counters. |
| 1.3.6.1.4.1.5205.2.23.1.12.3 | Nodees2310cGvrpGroup | |||
| 1.3.6.1.4.1.5205.2.23.1.12.3.1 | Scalares2310cGvrpGroupNumber | read-only | current | This is number of the GVRP group table entry. |
| 1.3.6.1.4.1.5205.2.23.1.12.3.2 | Tablees2310cGvrpGroupTable | not-accessible | current | This is a list of the GVRP group table. |
| 1.3.6.1.4.1.5205.2.23.1.12.3.2.1 | Rowes2310cGvrpGroupEntry | not-accessible | current | Entry(s) for the GVRP group table. |
| 1.3.6.1.4.1.5205.2.23.1.12.3.2.1.1 | Columnes2310cGvrpGroupId | read-only | current | The index of the GVRP group table. |
| 1.3.6.1.4.1.5205.2.23.1.12.3.2.1.2 | Columnes2310cGvrpGroupVid | read-only | current | This is vid of GVRP group. |
| 1.3.6.1.4.1.5205.2.23.1.12.3.2.1.3 | Columnes2310cGvrpGroupMemberPort | read-only | current | This is the member port of GVRP group. |
| 1.3.6.1.4.1.5205.2.23.1.13 | Nodees2310cSecurity | |||
| 1.3.6.1.4.1.5205.2.23.1.13.1 | Scalares2310cIsolatedPortGroup | read-write | current | This is isolated group. 0: Disable |
| 1.3.6.1.4.1.5205.2.23.1.13.2 | Nodees2310cMirror | |||
| 1.3.6.1.4.1.5205.2.23.1.13.2.1 | Scalares2310cMirrorMode | read-write | current | This is mirror mode. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.23.1.13.2.2 | Scalares2310cMonitoringPort | read-write | current | This is monitoring port. |
| 1.3.6.1.4.1.5205.2.23.1.13.2.3 | Scalares2310cMonitoredIngressPort | read-write | current | This is monitored ingress ports. |
| 1.3.6.1.4.1.5205.2.23.1.13.2.4 | Scalares2310cMonitoredEgressPort | read-write | current | This is monitored egress ports. |
| 1.3.6.1.4.1.5205.2.23.1.14 | Nodees2310cVirtualStack | |||
| 1.3.6.1.4.1.5205.2.23.1.14.1 | Scalares2310cVirtualStackState | read-write | current | Set the Virtual Stack State. 0 : disable, 1 : enable |
| 1.3.6.1.4.1.5205.2.23.1.14.2 | Scalares2310cVirtualStackRole | read-write | current | Set the Virtual Stack Role. 0 : slave, 1 : master |
| 1.3.6.1.4.1.5205.2.23.1.14.3 | Scalares2310cVirtualStackGroupID | read-write | current | Set the Virtual Stack Group ID. |
| 1.3.6.1.4.1.5205.2.23.1.15 | Nodees2310cManagementSecurity | |||
| 1.3.6.1.4.1.5205.2.23.1.15.1 | Scalares2310cManagementSecurityNumber | read-only | current | This is number of the management security table entry. |
| 1.3.6.1.4.1.5205.2.23.1.15.2 | Scalares2310cManagementSecurityEntryCreate | read-write | current | Creat a management security entry. Set 1: add a new entry, Get: the number means index. |
| 1.3.6.1.4.1.5205.2.23.1.15.3 | Tablees2310cManagementSecurityTable | not-accessible | current | This is a list of the management security table. |
| 1.3.6.1.4.1.5205.2.23.1.15.3.1 | Rowes2310cManagementSecurityEntry | not-accessible | current | Entry(s) for the management security table. |
| 1.3.6.1.4.1.5205.2.23.1.15.3.1.1 | Columnes2310cManagementSecurityIndex | not-accessible | current | The index of the management security table. |
| 1.3.6.1.4.1.5205.2.23.1.15.3.1.2 | Columnes2310cManagementSecurityName | read-write | current | The name of the management security entry. |
| 1.3.6.1.4.1.5205.2.23.1.15.3.1.3 | Columnes2310cManagementSecurityVid | read-write | current | This is the vid of the management security entry. 0: any VID. |
| 1.3.6.1.4.1.5205.2.23.1.15.3.1.4 | Columnes2310cManagementSecurityIpRange | read-write | current | This is the IP range of the management security entry. 0: any IP. |
| 1.3.6.1.4.1.5205.2.23.1.15.3.1.5 | Columnes2310cManagementSecurityIncomigPort | read-write | current | This is the ports of the management security entry. 0: any incoming port. |
| 1.3.6.1.4.1.5205.2.23.1.15.3.1.6 | Columnes2310cManagementSecurityAccessType | read-write | current | This is the access type of the management security entry. for example: http,snmp,telnet for example: http,telnet for example: any any means http,snmp and telne… |
| 1.3.6.1.4.1.5205.2.23.1.15.3.1.7 | Columnes2310cManagementSecurityAction | read-write | current | This is the action of the management security entry. 0:deny 1:accept |
| 1.3.6.1.4.1.5205.2.23.1.15.3.1.8 | Columnes2310cManagementSecurityEntryAction | read-write | current | The action the management security entry. 1:action 2:non-action 3:delete |
| 1.3.6.1.4.1.5205.2.23.1.16 | Nodees2310cQoS | |||
| 1.3.6.1.4.1.5205.2.23.1.16.1 | Nodees2310cQoSGlobalConfig | |||
| 1.3.6.1.4.1.5205.2.23.1.16.1.1 | Scalares2310cQoSMode | read-write | current | The mode of QoS. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.23.1.16.1.2 | Scalares2310cQosPriorityControl1p | read-write | current | This is the priority control for 802.1p. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.23.1.16.1.3 | Scalares2310cQosPriorityControlTOS | read-write | current | This is the priority control for TOS. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.23.1.16.1.4 | Scalares2310cQosPriorityControlDSCP | read-write | current | This is the priority control for DSCP. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.23.1.16.1.5 | Scalares2310cQoSSchedulingMethod | read-write | current | This is the scheduling method. 0 - WRR 1 - Strict |
| 1.3.6.1.4.1.5205.2.23.1.16.1.6 | Scalares2310cQoSWeightQ0 | read-write | current | This is the weigtht of Queue0. |
| 1.3.6.1.4.1.5205.2.23.1.16.1.7 | Scalares2310cQoSWeightQ1 | read-write | current | This is the weigtht of Queue1. |
| 1.3.6.1.4.1.5205.2.23.1.16.1.8 | Scalares2310cQoSWeightQ2 | read-write | current | This is the weigtht of Queue2. |
| 1.3.6.1.4.1.5205.2.23.1.16.1.9 | Scalares2310cQoSWeightQ3 | read-write | current | This is the weigtht of Queue3. |
| 1.3.6.1.4.1.5205.2.23.1.16.2 | Scalares2310cQoSVIPPort | read-write | current | This is the VIP group for QoS. |
| 1.3.6.1.4.1.5205.2.23.1.16.3 | Nodees2310cQoS1pPriority | |||
| 1.3.6.1.4.1.5205.2.23.1.16.3.1 | Tablees2310cQoS1pPriorityTable | not-accessible | current | This is a list of the 802.1p. |
| 1.3.6.1.4.1.5205.2.23.1.16.3.1.1 | Rowes2310cQoS1pPriorityEntry | not-accessible | current | Entry(s) for the 802.1p priority table. |
| 1.3.6.1.4.1.5205.2.23.1.16.3.1.1.1 | Columnes2310cQoS1pPriorityIndex | not-accessible | current | The index of the 802.1p priority table. |
| 1.3.6.1.4.1.5205.2.23.1.16.3.1.1.2 | Columnes2310cQoS1pPriorityValue | read-only | current | The value of 802.1p priority entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.3.1.1.3 | Columnes2310cQoS1pPriorityQueue | read-write | current | The queue of 802.1p priority entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.4 | Nodees2310cQoSDTypeTOSPriority | |||
| 1.3.6.1.4.1.5205.2.23.1.16.4.1 | Tablees2310cQoSDTypeTOSPriorityTable | not-accessible | current | This is a list of the TOS delay priority mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.4.1.1 | Rowes2310cQoSDTypeTOSPriorityEntry | not-accessible | current | Entry(s) for the ToS delay priority mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.4.1.1.1 | Columnes2310cQoSDTypeTOSPriorityIndex | not-accessible | current | The index of the ToS delay priority mapping table. |
| 1.3.6.1.4.1.5205.2.23.1.16.4.1.1.2 | Columnes2310cQoSDTypeTOSPriorityValue | read-only | current | The value of ToS delay priority mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.4.1.1.3 | Columnes2310cQoSDTypeTOSPriorityQueue | read-write | current | The queue of ToS delay priority mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.5 | Nodees2310cQoSTTypeTOSPriority | |||
| 1.3.6.1.4.1.5205.2.23.1.16.5.1 | Tablees2310cQoSTTypeTOSPriorityTable | not-accessible | current | This is a list of the ToS throughput priority mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.5.1.1 | Rowes2310cQoSTTypeTOSPriorityEntry | not-accessible | current | Entry(s) for the TOS Throughput mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.5.1.1.1 | Columnes2310cQoSTTypeTOSPriorityIndex | not-accessible | current | The index of the TOS throughput priority mapping table. |
| 1.3.6.1.4.1.5205.2.23.1.16.5.1.1.2 | Columnes2310cQoSTTypeTOSPriorityValue | read-only | current | The value of TOS throughput priority mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.5.1.1.3 | Columnes2310cQoSTTypeTOSPriorityQueue | read-write | current | The queue of TOS throughput priority mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.6 | Nodees2310cQoSRTypeTOSPriority | |||
| 1.3.6.1.4.1.5205.2.23.1.16.6.1 | Tablees2310cQoSRTypeTOSPriorityTable | not-accessible | current | This is a list of the ToS reliability priority mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.6.1.1 | Rowes2310cQoSRTypeTOSPriorityEntry | not-accessible | current | Entry(s) for the TOS reliability mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.6.1.1.1 | Columnes2310cQoSRTypeTOSPriorityIndex | not-accessible | current | The index of the TOS reliability priority mapping table. |
| 1.3.6.1.4.1.5205.2.23.1.16.6.1.1.2 | Columnes2310cQoSRTypeTOSPriorityValue | read-only | current | The value of TOS reliability priority mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.6.1.1.3 | Columnes2310cQoSRTypeTOSPriorityQueue | read-write | current | The queue of TOS reliability priority mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.7 | Nodees2310cQoSMTypeTOSPriority | |||
| 1.3.6.1.4.1.5205.2.23.1.16.7.1 | Tablees2310cQoSMTypeTOSPriorityTable | not-accessible | current | This is a list of the ToS monetary cost priority mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.7.1.1 | Rowes2310cQoSMTypeTOSPriorityEntry | not-accessible | current | Entry(s) for the TOS monetary cost mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.7.1.1.1 | Columnes2310cQoSMTypeTOSPriorityIndex | not-accessible | current | The index of the TOS monetary cost priority mapping table. |
| 1.3.6.1.4.1.5205.2.23.1.16.7.1.1.2 | Columnes2310cQoSMTypeTOSPriorityValue | read-only | current | The value of TOS monetary cost priority mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.7.1.1.3 | Columnes2310cQoSMTypeTOSPriorityQueue | read-write | current | The queue of TOS monetary cost priority mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.8 | Nodees2310cQoSDSCPPriority | |||
| 1.3.6.1.4.1.5205.2.23.1.16.8.1 | Tablees2310cQoSDSCPPriorityTable | not-accessible | current | This is a list of the DSCP priority entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.8.1.1 | Rowes2310cQoSDSCPPriorityEntry | not-accessible | current | Entry(s) for the DSCP priority mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.8.1.1.1 | Columnes2310cQoSDSCPPriorityIndex | not-accessible | current | The index of the DSCP priority priority mapping table. |
| 1.3.6.1.4.1.5205.2.23.1.16.8.1.1.2 | Columnes2310cQoSDSCPPriorityValue | read-only | current | The value of DSCP priority priority mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.16.8.1.1.3 | Columnes2310cQoSDSCPPriorityQueue | read-write | current | The queue of DSCP priority priority mapping entry. |
| 1.3.6.1.4.1.5205.2.23.1.17 | Nodees2310cVlan | |||
| 1.3.6.1.4.1.5205.2.23.1.17.1 | Nodees2310cVlanModeConfig | |||
| 1.3.6.1.4.1.5205.2.23.1.17.1.1 | Scalares2310cVlanMode | read-write | current | 0:Tag-based, 1:Port-based, 2:Metro mode |
| 1.3.6.1.4.1.5205.2.23.1.17.1.2 | Scalares2310cSymmetricVlan | read-write | current | Symmetric VLAN: for tag-based 0:disable, 1:enable |
| 1.3.6.1.4.1.5205.2.23.1.17.1.3 | Scalares2310cVlanSVL | read-write | current | SVL: : for tag-based 0:disable, 1:enable |
| 1.3.6.1.4.1.5205.2.23.1.17.1.4 | Scalares2310cDoubleTag | read-write | current | Double Tag: for tag-based 0:disable, 1:enable |
| 1.3.6.1.4.1.5205.2.23.1.17.1.5 | Scalares2310cUpLinkPort | read-write | current | Up link Port: for Metro mode 0:Port 9, 1:Port 10, 2:Port 9 & 10 |
| 1.3.6.1.4.1.5205.2.23.1.17.2 | Nodees2310cTagBasedVlanGroup | |||
| 1.3.6.1.4.1.5205.2.23.1.17.2.1 | Scalares2310cTagBasedVlanNumbers | read-only | current | Total numbers for tag-based vlan. |
| 1.3.6.1.4.1.5205.2.23.1.17.2.2 | Scalares2310cTagBasedCreateStatus | read-write | current | Creat a temp vlan in tag-based vlan table. 0 : none, 1~4094 : creat with this vid. |
| 1.3.6.1.4.1.5205.2.23.1.17.2.3 | Tablees2310cTagBasedVlanTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.23.1.17.2.3.1 | Rowes2310cTagBasedVlanEntry | not-accessible | current | Entry(s) for tag-based vlan table. |
| 1.3.6.1.4.1.5205.2.23.1.17.2.3.1.1 | Columnes2310cTagBasedVlanVid | not-accessible | current | The vid of vlan. |
| 1.3.6.1.4.1.5205.2.23.1.17.2.3.1.2 | Columnes2310cTagBasedVlanName | read-write | current | The name of vlan. |
| 1.3.6.1.4.1.5205.2.23.1.17.2.3.1.3 | Columnes2310cTagBasedVlanMember | read-write | current | The member of vlan. |
| 1.3.6.1.4.1.5205.2.23.1.17.2.3.1.4 | Columnes2310cTagBasedVlanUntag | read-write | current | The untag port of vlan. |
| 1.3.6.1.4.1.5205.2.23.1.17.2.3.1.5 | Columnes2310cTagBasedVlanRowStatus | read-write | current | The row status of vlan. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.5205.2.23.1.17.3 | Nodees2310cVlanPvid | |||
| 1.3.6.1.4.1.5205.2.23.1.17.3.1 | Tablees2310cVlanPvidTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.23.1.17.3.1.1 | Rowes2310cVlanPvidEntry | not-accessible | current | Entry(s) for Vlan Pvid. |
| 1.3.6.1.4.1.5205.2.23.1.17.3.1.1.1 | Columnes2310cVlanPvidPort | not-accessible | current | The port number of pvid entry. |
| 1.3.6.1.4.1.5205.2.23.1.17.3.1.1.2 | Columnes2310cVlanPvidValue | read-write | current | The pvid value of port. |
| 1.3.6.1.4.1.5205.2.23.1.17.3.1.1.3 | Columnes2310cVlanPvidDefaultPriority | read-write | current | The default priority of port . |
| 1.3.6.1.4.1.5205.2.23.1.17.3.1.1.4 | Columnes2310cVlanPvidDropUntag | read-write | current | The drop untag of port . |
| 1.3.6.1.4.1.5205.2.23.1.17.4 | Nodees2310cPortBasedVlanGroup | |||
| 1.3.6.1.4.1.5205.2.23.1.17.4.1 | Scalares2310cPortBasedVlanNumbers | read-only | current | Total numbers for tag-based vlan. |
| 1.3.6.1.4.1.5205.2.23.1.17.4.2 | Scalares2310cPortBasedCreateStatus | read-write | current | Creat a temp vlan in port-based vlan table. 0 : none, 1 : creat a new port-based vlan. |
| 1.3.6.1.4.1.5205.2.23.1.17.4.3 | Tablees2310cPortBasedVlanTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.23.1.17.4.3.1 | Rowes2310cPortBasedVlanEntry | not-accessible | current | Entry(s) for port-based vlan table. |
| 1.3.6.1.4.1.5205.2.23.1.17.4.3.1.1 | Columnes2310cPortBasedVlanIndex | not-accessible | current | The index of vlan. |
| 1.3.6.1.4.1.5205.2.23.1.17.4.3.1.2 | Columnes2310cPortBasedVlanName | read-write | current | The name of vlan. |
| 1.3.6.1.4.1.5205.2.23.1.17.4.3.1.3 | Columnes2310cPortBasedVlanMember | read-write | current | The member of vlan. |
| 1.3.6.1.4.1.5205.2.23.1.17.4.3.1.4 | Columnes2310cPortBasedVlanRowStatus | read-write | current | The row status of vlan. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.5205.2.23.1.17.5 | Nodees2310cManagementVlan | |||
| 1.3.6.1.4.1.5205.2.23.1.17.5.1 | Scalares2310cManagementVlanState | read-write | current | The stat of management vlan. (for tag-base) 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.23.1.17.5.2 | Scalares2310cManagementVlanVid | read-write | current | The vid value of management vlan. |
| 1.3.6.1.4.1.5205.2.23.1.18 | Nodees2310cDot1X | |||
| 1.3.6.1.4.1.5205.2.23.1.18.1 | Nodees2310cDot1XStateSetting | |||
| 1.3.6.1.4.1.5205.2.23.1.18.1.1 | Scalares2310cRadiusServer | read-write | current | Set radius server ip |
| 1.3.6.1.4.1.5205.2.23.1.18.1.2 | Scalares2310cDot1XPort | read-write | current | Set 802.1X port number |
| 1.3.6.1.4.1.5205.2.23.1.18.1.3 | Scalares2310cSecretKey | read-write | current | Set 802.1X secret key |
| 1.3.6.1.4.1.5205.2.23.1.18.1.4 | Scalares2310cAccountingService | read-write | current | Set 802.1X accounting service 0 : disable 1 : enable |
| 1.3.6.1.4.1.5205.2.23.1.18.1.5 | Scalares2310cAccountingServer | read-write | current | Set 802.1X accounting server |
| 1.3.6.1.4.1.5205.2.23.1.18.1.6 | Scalares2310cAccountingPort | read-write | current | Set 802.1X accounting port number |
| 1.3.6.1.4.1.5205.2.23.1.18.2 | Nodees2310cDot1XPortSecurityManagement | |||
| 1.3.6.1.4.1.5205.2.23.1.18.2.1 | Tablees2310cDot1XPortSecurityTable | not-accessible | current | This is a list of the 802.1x port security entry. |
| 1.3.6.1.4.1.5205.2.23.1.18.2.1.1 | Rowes2310cDot1XPortSecurityEntry | not-accessible | current | Entry(s) for 802.1x port security management table. |
| 1.3.6.1.4.1.5205.2.23.1.18.2.1.1.1 | Columnes2310cDot1XPortSecurityPortIndex | not-accessible | current | The port index of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.23.1.18.2.1.1.2 | Columnes2310cDot1XPortSecurityMode | read-write | current | The mode of 802.1x port security. 0 : Disable, 1 : Normal, 2 : Advanced 802.1X |
| 1.3.6.1.4.1.5205.2.23.1.18.2.1.1.3 | Columnes2310cDot1XPortSecurityPortControl | read-write | current | The port control of 802.1x port security. 0 : ForceUnauthorized, 1 : ForceAuthorized, 2 : Auto |
| 1.3.6.1.4.1.5205.2.23.1.18.2.1.1.4 | Columnes2310cDot1XPortSecurityReAuthMax | read-write | current | The reAuthMax(1~10) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.23.1.18.2.1.1.5 | Columnes2310cDot1XPortSecurityTxPeriod | read-write | current | The txPeriod(1~65535) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.23.1.18.2.1.1.6 | Columnes2310cDot1XPortSecurityQuietPeriod | read-write | current | The quiet period(0~65535) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.23.1.18.2.1.1.7 | Columnes2310cDot1XPortSecurityReAuthEnabled | read-write | current | The reAuthEnabled of 802.1x port security. 0 : off, 1 : on. |
| 1.3.6.1.4.1.5205.2.23.1.18.2.1.1.8 | Columnes2310cDot1XPortSecurityReAuthPeriod | read-write | current | The reAuthPeriod(1~65535) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.23.1.18.2.1.1.9 | Columnes2310cDot1XPortSecurityMaxRequest | read-write | current | The max.request(1~10) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.23.1.18.2.1.1.10 | Columnes2310cDot1XPortSecuritySuppTimeout | read-write | current | The suppTimeout(1~65535) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.23.1.18.2.1.1.11 | Columnes2310cDot1XPortSecurityServerTimeout | read-write | current | The server timeout(1~65535) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.23.1.18.2.1.1.12 | Columnes2310cDot1XPortSecurityStatus | read-only | current | The status of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.23.1.19 | Nodees2310cTrunkInfo | |||
| 1.3.6.1.4.1.5205.2.23.1.19.1 | Nodees2310cTrunkPort | |||
| 1.3.6.1.4.1.5205.2.23.1.19.1.1 | Tablees2310cTrunkPortTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.23.1.19.1.1.1 | Rowes2310cTrunkPortEntry | not-accessible | current | Entry(s) for trunk table. |
| 1.3.6.1.4.1.5205.2.23.1.19.1.1.1.1 | Columnes2310cTrunkPortIndex | not-accessible | current | The port index of trunk table. |
| 1.3.6.1.4.1.5205.2.23.1.19.1.1.1.2 | Columnes2310cTrunkPortMethod | read-write | current | The method of trunk port. 0 : None, 1 : LACP, 2 : Static. |
| 1.3.6.1.4.1.5205.2.23.1.19.1.1.1.3 | Columnes2310cTrunkPortGroup | read-write | current | The group(0~3) of trunk port. Each group just can have one method. Rule1: Maximum 3 groups are allowed. Rule2: The members of each group cannot exceed more tha… |
| 1.3.6.1.4.1.5205.2.23.1.19.1.1.1.4 | Columnes2310cTrunkPortActiveLacp | read-write | current | The active lacp mode of trunk port. 0 : Passive, 1 : Active. |
| 1.3.6.1.4.1.5205.2.23.1.19.1.1.1.5 | Columnes2310cTrunkPortAggtr | read-only | current | The Aggtr of trunk port. |
| 1.3.6.1.4.1.5205.2.23.1.19.1.1.1.6 | Columnes2310cTrunkPortStatus | read-only | current | The status of trunk port. 0 : None, 1 : Ready. |
| 1.3.6.1.4.1.5205.2.23.1.19.1.1.1.7 | Columnes2310cTrunkPortCurrentMode | read-write | current | The current mode of trunk port entry. 0 : Active mode, 1 : Edit mode, 2 : Do edit. |
| 1.3.6.1.4.1.5205.2.23.1.19.2 | Nodees2310cAggregatorView | |||
| 1.3.6.1.4.1.5205.2.23.1.19.2.1 | Tablees2310cAggregatorViewTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.23.1.19.2.1.1 | Rowes2310cAggregatorViewEntry | not-accessible | current | Entry(s) for aggregator view table. |
| 1.3.6.1.4.1.5205.2.23.1.19.2.1.1.1 | Columnes2310cAggregatorViewIndex | not-accessible | current | The port index of aggregator view table. |
| 1.3.6.1.4.1.5205.2.23.1.19.2.1.1.2 | Columnes2310cAggregatorViewMethod | read-only | current | The method of aggregator view table. 0 : None, 1 : LACP, 2 : Static. |
| 1.3.6.1.4.1.5205.2.23.1.19.2.1.1.3 | Columnes2310cAggregatorViewMemberPorts | read-only | current | The member ports of aggregator view table. |
| 1.3.6.1.4.1.5205.2.23.1.19.2.1.1.4 | Columnes2310cAggregatorViewReadyPorts | read-only | current | The ready ports of aggregator view table. |
| 1.3.6.1.4.1.5205.2.23.1.19.3 | Nodees2310cLacpSystemConfiguration | |||
| 1.3.6.1.4.1.5205.2.23.1.19.3.1 | Scalares2310cLacpSystemPriority | read-write | current | The priority of LACP system. |
| 1.3.6.1.4.1.5205.2.23.1.19.3.2 | Scalares2310cLacpSystemHashMethod | read-write | current | The hash method of LACP system. 0 : DA and SA 1 : SA 2 : DA |
| 1.3.6.1.4.1.5205.2.23.1.20 | Nodees2310cTrapEntry | |||
| 1.3.6.1.4.1.5205.2.23.1.20.1 | Notificationes2310cModuleInserted | current | Send this trap when a module is inserted to the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.23.1.20.2 | Notificationes2310cModuleRemoved | current | Send this trap when a module is removed from the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.23.1.20.3 | Notificationes2310cDualMediaSwapped | current | Send this trap when the dual media port changed. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.23.1.20.4 | Notificationes2310cPoEFailure | current | Send this trap while detecting the malfunction of PoE chips. | |
| 1.3.6.1.4.1.5205.2.23.1.20.5 | Notificationes2310cLoopDetected | current | Send this trap when loop condition has been detected. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.23.1.20.6 | Notificationes2310cLoginProtected | current | Send the trap when login protect has been detected. | |
| 1.3.6.1.4.1.5205.2.23.1.20.100 | Notificationes2310cStpStateDisabled | current | Send this trap when the operational state of STP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.23.1.20.101 | Notificationes2310cStpStateEnabled | current | Send this trap when the operational state of STP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.23.1.20.102 | Notificationes2310cStpTopologyChanged | current | Send this trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces… | |
| 1.3.6.1.4.1.5205.2.23.1.20.110 | Notificationes2310cRmonRisingAlarm | current | Send this trap when an RMON rising alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that exceeds its own Risi… | |
| 1.3.6.1.4.1.5205.2.23.1.20.111 | Notificationes2310cRmonFallingAlarm | current | Send this trap when an RMON falling alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that is smaller than its… | |
| 1.3.6.1.4.1.5205.2.23.1.20.120 | Notificationes2310cLacpStateDisabled | current | Send this trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.23.1.20.121 | Notificationes2310cLacpStateEnabled | current | Send this trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.23.1.20.123 | Notificationes2310cLacpPortAdded | current | Send this trap when the state of port is in 'trunk ready'. | |
| 1.3.6.1.4.1.5205.2.23.1.20.124 | Notificationes2310cLacpPortTrunkFailure | current | Send this trap when one port is not able to be aggregated due to duplex-mode of the port. | |
| 1.3.6.1.4.1.5205.2.23.1.20.140 | Notificationes2310cGvrpStateDisabled | current | Send this trap when the operational state of GVRP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.23.1.20.141 | Notificationes2310cGvrpStateEnabled | current | Send this trap when the operational state of LACP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.23.1.20.151 | Notificationes2310cVlanPortBaseEnabled | current | Send this trap when the operational state of vlan is changed to port-based vlan. | |
| 1.3.6.1.4.1.5205.2.23.1.20.152 | Notificationes2310cVlanTagBaseEnabled | current | Send this trap when the operational state of vlan is changed to tag-based vlan. | |
| 1.3.6.1.4.1.5205.2.23.1.20.153 | Notificationes2310cVlanMetroBaseEnabled | current | Send this trap when the operational state of vlan is changed to metro-based vlan. | |
| 1.3.6.1.4.1.5205.2.23.1.20.200 | Notificationes2310cUserLogin | current | Send this trap when one user logins the system. | |
| 1.3.6.1.4.1.5205.2.23.1.20.201 | Notificationes2310cUserLogout | current | Send this trap when one user logouts the system. | |
| 1.3.6.1.4.1.5205.2.23.1.21 | Nodees2310cTrapVariable | |||
| 1.3.6.1.4.1.5205.2.23.1.21.1 | Scalarusername | read-only | current | System account name. |
| 1.3.6.1.4.1.5205.2.23.1.21.2 | ScalargroupId | read-only | current | The Trunk group ID of LACP. |
| 1.3.6.1.4.1.5205.2.23.1.21.3 | Scalaractorkey | read-only | current | The actor key information for LACP. |
| 1.3.6.1.4.1.5205.2.23.1.21.4 | Scalarpartnerkey | read-only | current | The partner key information for LACP. |
| 1.3.6.1.4.1.5205.2.23.1.21.5 | Scalaruplink | read-only | current | Uplink port(s) in the metro-mode vlan. |
| 1.3.6.1.4.1.5205.2.23.1.21.6 | ScalarloginProtectInfo | read-only | current | Loging protect information. |
| 1.3.6.1.4.1.5205.2.23.1.22 | Nodees2310cLoginProtect | |||
| 1.3.6.1.4.1.5205.2.23.1.22.1 | Scalares2310cLockMinutes | read-write | current | Set the login lock time. Available from 0 to 10 (minutes) Set 0 as disabled. |
| 1.3.6.1.4.1.5205.2.23.1.22.2 | Scalares2310cLoginErrors | read-write | current | Set login error count. Available from 0 to 10 (times) Set 0 as disabled. |
| 1.3.6.1.4.1.5205.2.23.1.23 | Nodees2310cIgmpSnooping | |||
| 1.3.6.1.4.1.5205.2.23.1.23.1 | Scalares2310cIgmpSnoopingMode | read-write | current | Set Igmp Snooping Mode. 0 : disable, 1 : active, 2 : passive |
| 1.3.6.1.4.1.5205.2.23.1.23.2 | Scalares2310cIgmpSnoopingRouterPort | read-write | current | Set Igmp Snooping Router Port. |
| 1.3.6.1.4.1.5205.2.23.1.23.3 | Nodees2310cIgmpVlanGroupAllow | |||
| 1.3.6.1.4.1.5205.2.23.1.23.3.1 | Scalares2310cIgmpVlanGroupAllowState | read-write | current | Set Igmp Vlan Group Allow State. 0 : disable, 1 : enable, |
| 1.3.6.1.4.1.5205.2.23.1.23.3.2 | Scalares2310cIgmpVlanGroupAllowNumber | read-only | current | This is number of Igmp Vlan Group Allow table entry |
| 1.3.6.1.4.1.5205.2.23.1.23.3.3 | Scalares2310cIgmpVlanGroupAllowEntryCreate | read-write | current | Creat a Igmp Vlan Group Allow entry. Set 1: add a new entry, Get: the number means index. |
| 1.3.6.1.4.1.5205.2.23.1.23.3.4 | Tablees2310cIgmpVlanGroupAlloTable | not-accessible | current | This is a list of Igmp Vlan Group Allow table. |
| 1.3.6.1.4.1.5205.2.23.1.23.3.4.1 | RowES2310CIgmpVlanGroupAllowEntry | not-accessible | current | Entry(s) for Igmp Vlan Group Allow Table. |
| 1.3.6.1.4.1.5205.2.23.1.23.3.4.1.1 | Columnes2310cIgmpVlanGroupAllowIndex | not-accessible | current | The index of Igmp Vlan Group Allow Table. |
| 1.3.6.1.4.1.5205.2.23.1.23.3.4.1.2 | Columnes2310cIgmpVlanGroupAllowIpRange | read-write | current | The start address of Igmp Vlan Group Allow table entry. |
| 1.3.6.1.4.1.5205.2.23.1.23.3.4.1.3 | Columnes2310cIgmpVlanGroupAllowVid | read-write | current | The vlan id of Igmp Vlan Group Allow table entry. 0: any VID. |
| 1.3.6.1.4.1.5205.2.23.1.23.3.4.1.4 | Columnes2310cIgmpVlanGroupAllowPort | read-write | current | The port of Igmp Vlan Group Allow table entry. |
| 1.3.6.1.4.1.5205.2.23.1.23.3.4.1.5 | Columnes2310cIgmpVlanGroupAllowEntryAction | read-write | current | The action of Igmp Vlan Group Allow table entry. 1:action 2:non-action 3:delete |
| 1.3.6.1.4.1.5205.2.23.1.23.4 | Nodees2310cIgmpStaticIpMulticast | |||
| 1.3.6.1.4.1.5205.2.23.1.23.4.1 | Scalares2310cIgmpStaticIpMulticastNumber | read-only | current | This is number of Igmp Static IP Multicast table entry |
| 1.3.6.1.4.1.5205.2.23.1.23.4.2 | Scalares2310cIgmpStaticIpMulticastEntryCreate | read-write | current | Creat a Igmp Static IP Multicast entry. Set 1: add a new entry, Get: the number means index. |
| 1.3.6.1.4.1.5205.2.23.1.23.4.3 | Tablees2310cIgmpStaticIpMulticastTable | not-accessible | current | This is a list of Igmp Static IP Multicast table. |
| 1.3.6.1.4.1.5205.2.23.1.23.4.3.1 | RowES2310CIgmpStaticIpMulticastEntry | not-accessible | current | Entry(s) for Igmp Static IP Multicast Table. |
| 1.3.6.1.4.1.5205.2.23.1.23.4.3.1.1 | Columnes2310cIgmpStaticIpMulticastIndex | not-accessible | current | The index of Igmp Static IP Multicast Table. |
| 1.3.6.1.4.1.5205.2.23.1.23.4.3.1.2 | Columnes2310cIgmpStaticIpMulticastIp | read-write | current | The IP address of Igmp Static IP Multicast table entry. |
| 1.3.6.1.4.1.5205.2.23.1.23.4.3.1.3 | Columnes2310cIgmpStaticIpMulticastVid | read-write | current | The vlan id of Igmp Static IP Multicast table entry. |
| 1.3.6.1.4.1.5205.2.23.1.23.4.3.1.4 | Columnes2310cIgmpStaticIpMulticastPort | read-write | current | The port of Igmp Static IP Multicast table entry. |
| 1.3.6.1.4.1.5205.2.23.1.23.4.3.1.5 | Columnes2310cIgmpStaticIpMulticastEntryAction | read-write | current | The action of Igmp Static IP Multicast table entry. 1:action 2:non-action 3:delete |
| 1.3.6.1.4.1.5205.2.23.1.23.5 | Nodees2310cRadiusIgmpSetting | |||
| 1.3.6.1.4.1.5205.2.23.1.23.5.1 | Scalares2310cRadiusIgmpServer1 | read-write | current | Radius Igmp Server1 |
| 1.3.6.1.4.1.5205.2.23.1.23.5.2 | Scalares2310cRadiusIgmpPortNumber1 | read-write | current | Set Radius Igmp port number1. port number: from 1 to 65535 |
| 1.3.6.1.4.1.5205.2.23.1.23.5.3 | Scalares2310cRadiusIgmpServer2 | read-write | current | Radius Igmp Server2 |
| 1.3.6.1.4.1.5205.2.23.1.23.5.4 | Scalares2310cRadiusIgmpPortNumber2 | read-write | current | Set Radius Igmp port number2. port number: from 1 to 65535 |
| 1.3.6.1.4.1.5205.2.23.1.23.5.5 | Scalares2310cRadiusIgmpResponseTimeout | read-write | current | Set radius-igmp timeout. time: 2 ~ 60 seconds |
| 1.3.6.1.4.1.5205.2.23.1.23.5.6 | Scalares2310cRadiusIgmpNumberOfRetry | read-write | current | Set radius-igmp number of retry. value: 0 ~ 10 times |
| 1.3.6.1.4.1.5205.2.23.1.23.5.7 | Scalares2310cRadiusIgmpSecretKey | read-write | current | Set Radius Igmp secret key. The length of secret-key is from 1 to 31 |
| 1.3.6.1.4.1.5205.2.23.1.23.5.8 | Scalares2310cRadiusIgmpPortMember | read-write | current | The Port Member of Radius Igmp. |
| 1.3.6.1.4.1.5205.2.23.1.23.6 | Nodees2310cMulticastStatus | |||
| 1.3.6.1.4.1.5205.2.23.1.23.6.1 | Tablees2310cMulticastStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.23.1.23.6.1.1 | Rowes2310cMulticastStatusEntry | not-accessible | current | Entry(s) for Multicast Status table. |
| 1.3.6.1.4.1.5205.2.23.1.23.6.1.1.1 | Columnes2310cMulticastStatusIndex | not-accessible | current | The index of multicast status table. |
| 1.3.6.1.4.1.5205.2.23.1.23.6.1.1.2 | Columnes2310cMulticastStatusVid | read-only | current | The Vid of multicast status table. |
| 1.3.6.1.4.1.5205.2.23.1.23.6.1.1.3 | Columnes2310cMulticastStatusMulticastGroup | read-only | current | The Multicast Group of multicast status table. |
| 1.3.6.1.4.1.5205.2.23.1.23.6.1.1.4 | Columnes2310cMulticastStatusPortMember | read-only | current | The Port Member of multicast status table. |