RUBYTECH-ES2310Q-MIB
174 objects
The MIB module for Ruby Tech.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5205 | Identityrubytech | The MIB module for Ruby Tech. | ||
| 1.3.6.1.4.1.5205.2 | Nodeswitch | |||
| 1.3.6.1.4.1.5205.2.24 | Nodees2310qProductID | |||
| 1.3.6.1.4.1.5205.2.24.1 | Nodees2310qProduces | |||
| 1.3.6.1.4.1.5205.2.24.1.1 | Nodees2310qSystem | |||
| 1.3.6.1.4.1.5205.2.24.1.1.1 | Nodees2310qCommonSys | |||
| 1.3.6.1.4.1.5205.2.24.1.1.1.1 | Scalares2310qReboot | read-write | current | reboot the system. Get this oid always return zero. 0 - do nothing 1 - reboot without saving start 2 - reboot with saving start |
| 1.3.6.1.4.1.5205.2.24.1.1.1.2 | Scalares2310qBiosVsersion | read-only | current | Get the BIOS version of the system. |
| 1.3.6.1.4.1.5205.2.24.1.1.1.3 | Scalares2310qFirmwareVersion | read-only | current | Get the firmware version of the system. |
| 1.3.6.1.4.1.5205.2.24.1.1.1.4 | Scalares2310qHardwareVersion | read-only | current | Get the hardware version of the system. |
| 1.3.6.1.4.1.5205.2.24.1.1.1.5 | Scalares2310qMechanicalVersion | read-only | current | Get the mechanical version of the system. |
| 1.3.6.1.4.1.5205.2.24.1.1.1.6 | Scalares2310qSerialNumber | read-only | current | Get the serial number of the system. |
| 1.3.6.1.4.1.5205.2.24.1.1.1.7 | Scalares2310qHostMacAddress | read-only | current | Get the MAC address of the system. |
| 1.3.6.1.4.1.5205.2.24.1.1.1.8 | Scalares2310qDevicePort | read-only | current | Get the quantity of ports that this system owns now. |
| 1.3.6.1.4.1.5205.2.24.1.1.1.9 | Scalares2310qRamSize | read-only | current | Get the RAM size of the system. |
| 1.3.6.1.4.1.5205.2.24.1.1.1.10 | Scalares2310qFlashSize | read-only | current | Get the flash size of the system. |
| 1.3.6.1.4.1.5205.2.24.1.1.2 | Nodees2310qIP | |||
| 1.3.6.1.4.1.5205.2.24.1.1.2.1 | Scalares2310qDhcpSetting | read-write | current | Get/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enable |
| 1.3.6.1.4.1.5205.2.24.1.1.2.2 | Scalares2310qIPAddress | read-write | current | Get/Set the IP address of the system. Can't Set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.24.1.1.2.3 | Scalares2310qNetMask | read-write | current | Get/Set the netmask of the system. Can't Set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.24.1.1.2.4 | Scalares2310qDefaultGateway | read-write | current | Get/Set the default gateway of the system. Can't Set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.24.1.1.2.5 | Scalares2310qDnsSetting | read-write | current | Get/Set the source of DNS server. Can't Set this OID if DHCP status is disabled. 0 - manual, the DNS server is from manaul setting 1 - auto, the DNS server is … |
| 1.3.6.1.4.1.5205.2.24.1.1.2.6 | Scalares2310qDnsServer | read-write | current | Get/Set the DNS server of the system. |
| 1.3.6.1.4.1.5205.2.24.1.1.3 | Nodees2310qTime | |||
| 1.3.6.1.4.1.5205.2.24.1.1.3.1 | Scalares2310qSystemCurrentTime | read-only | current | Get the current time in the system. |
| 1.3.6.1.4.1.5205.2.24.1.1.3.2 | Scalares2310qManualTimeSetting | read-write | current | Get/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25 . value range: … |
| 1.3.6.1.4.1.5205.2.24.1.1.3.3 | Scalares2310qNTPServer | read-write | current | Get/Set the NTP Time Server. You can use the IP address or domain name. |
| 1.3.6.1.4.1.5205.2.24.1.1.3.4 | Scalares2310qNTPTimeZone | read-write | current | Get/Set the NTP Time Zone. value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - GMT -… |
| 1.3.6.1.4.1.5205.2.24.1.1.3.5 | Scalares2310qNTPTimeSync | read-write | current | Sync time from NTP Server. Get this oid always return zero. Setting the Time Server and TimeZone before doing time sync. Notice that time server must be correc… |
| 1.3.6.1.4.1.5205.2.24.1.1.3.6 | Scalares2310qDaylightSavingTime | read-write | current | Get/Set the daylight saveing time. value range is between -5 and 5. unit: hour. |
| 1.3.6.1.4.1.5205.2.24.1.1.3.7 | Scalares2310qDaylightStartTime | read-write | current | Get/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 10/01… |
| 1.3.6.1.4.1.5205.2.24.1.1.3.8 | Scalares2310qDaylightEndTime | read-write | current | Get/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 04/01/0… |
| 1.3.6.1.4.1.5205.2.24.1.1.4 | Nodees2310qAccount | |||
| 1.3.6.1.4.1.5205.2.24.1.1.4.1 | Scalares2310qAccountNumber | read-only | current | Get the current account number(s) of the system. |
| 1.3.6.1.4.1.5205.2.24.1.1.4.2 | Tablees2310qAccountTable | not-accessible | current | A list of es2310qAccountEntry. The number of entries are given by the value of es2310qAccountNumber. |
| 1.3.6.1.4.1.5205.2.24.1.1.4.2.1 | Rowes2310qAccountEntry | not-accessible | current | Entry(s) for account informaion. |
| 1.3.6.1.4.1.5205.2.24.1.1.4.2.1.1 | Columnes2310qAccountIndex | read-only | current | The index of the account entry. |
| 1.3.6.1.4.1.5205.2.24.1.1.4.2.1.2 | Columnes2310qAccountAuthorization | read-only | current | The authorization of the account entry. |
| 1.3.6.1.4.1.5205.2.24.1.1.4.2.1.3 | Columnes2310qAccountName | read-write | current | The username of the account entry. |
| 1.3.6.1.4.1.5205.2.24.1.1.4.2.1.4 | Columnes2310qAccountPassword | read-write | current | The password of the account entry. The return value is always '********'. |
| 1.3.6.1.4.1.5205.2.24.1.1.4.3 | Scalares2310qAccountAddName | read-write | current | The account name for adding operation. |
| 1.3.6.1.4.1.5205.2.24.1.1.4.4 | Scalares2310qAccountAddPassword | read-write | current | The account password for adding operation. The return value is aloways '********'. |
| 1.3.6.1.4.1.5205.2.24.1.1.4.5 | Scalares2310qDoAccountAdd | read-write | current | Add account name. OID es2310qAccountAddName and es2310qAccountAddPassword must be filled first. Get this oid always return zero. 1 - add account. 0 - do nothin… |
| 1.3.6.1.4.1.5205.2.24.1.1.4.6 | Scalares2310qAccountDel | read-write | current | Delete account. The value is valid es2310qAccountIndex(Can't delete administrator). |
| 1.3.6.1.4.1.5205.2.24.1.2 | Nodees2310qSnmp | |||
| 1.3.6.1.4.1.5205.2.24.1.2.1 | Scalares2310qGetCommunity | read-write | current | Get/Set the get-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.24.1.2.2 | Scalares2310qSetCommunity | read-write | current | Get/Set the set-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.24.1.2.3 | Scalares2310qTrapHostNumber | read-only | current | Get the number of trap hosts. |
| 1.3.6.1.4.1.5205.2.24.1.2.4 | Tablees2310qTrapHostTable | not-accessible | current | A list of trap host entry. The number of entries are given by the value of es2310qTrapHostNumber. |
| 1.3.6.1.4.1.5205.2.24.1.2.4.1 | Rowes2310qTrapHostEntry | not-accessible | current | Entry information for trap host. |
| 1.3.6.1.4.1.5205.2.24.1.2.4.1.1 | Columnes2310qTrapHostIndex | read-only | current | The index of the trap host entry. |
| 1.3.6.1.4.1.5205.2.24.1.2.4.1.2 | Columnes2310qTrapHostIP | read-write | current | The IP of the trap host. |
| 1.3.6.1.4.1.5205.2.24.1.2.4.1.3 | Columnes2310qTrapHostPort | read-write | current | The receiving-port number of the trap host. |
| 1.3.6.1.4.1.5205.2.24.1.2.4.1.4 | Columnes2310qTrapHostCommunity | read-write | current | The community name for the trap PDU. |
| 1.3.6.1.4.1.5205.2.24.1.3 | Nodees2310qAlarm | |||
| 1.3.6.1.4.1.5205.2.24.1.3.1 | Nodees2310qEvent | |||
| 1.3.6.1.4.1.5205.2.24.1.3.1.1 | Scalares2310qEventNumber | read-only | current | Get the total number of alarm events. |
| 1.3.6.1.4.1.5205.2.24.1.3.1.2 | Tablees2310qEventTable | not-accessible | current | A list of alarm event entry. The number of entries are given by the value of es2310qEventNumber. |
| 1.3.6.1.4.1.5205.2.24.1.3.1.2.1 | Rowes2310qEventEntry | not-accessible | current | Entry infomation for alarm event. |
| 1.3.6.1.4.1.5205.2.24.1.3.1.2.1.1 | Columnes2310qEventIndex | read-only | current | The index of the alarm event entry. |
| 1.3.6.1.4.1.5205.2.24.1.3.1.2.1.2 | Columnes2310qEventName | read-only | current | The alarm event name. |
| 1.3.6.1.4.1.5205.2.24.1.3.1.2.1.3 | Columnes2310qEventSendEmail | read-write | current | Send email when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.24.1.3.1.2.1.4 | Columnes2310qEventSendSMS | read-write | current | Send sms when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.24.1.3.1.2.1.5 | Columnes2310qEventSendTrap | read-write | current | Send trap when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.24.1.3.2 | Nodees2310qEmail | |||
| 1.3.6.1.4.1.5205.2.24.1.3.2.1 | Scalares2310qEmailServer | read-write | current | SMTP server for alarm event. |
| 1.3.6.1.4.1.5205.2.24.1.3.2.2 | Scalares2310qEmailUsername | read-write | current | Username of smtp server. |
| 1.3.6.1.4.1.5205.2.24.1.3.2.3 | Scalares2310qEmailPassword | read-write | current | User password of smtp server. |
| 1.3.6.1.4.1.5205.2.24.1.3.2.4 | Scalares2310qEmailUserNumber | read-only | current | The number of the email users that you want to send the alarm notification. |
| 1.3.6.1.4.1.5205.2.24.1.3.2.5 | Tablees2310qEmailUserTable | not-accessible | current | A list of email user entry. The number of entries are given by the value of es2310qEmailUserNumber. |
| 1.3.6.1.4.1.5205.2.24.1.3.2.5.1 | Rowes2310qEmailUserEntry | not-accessible | current | Entry information for email user entry. |
| 1.3.6.1.4.1.5205.2.24.1.3.2.5.1.1 | Columnes2310qEmailUserIndex | read-only | current | The index of the email user entry. |
| 1.3.6.1.4.1.5205.2.24.1.3.2.5.1.2 | Columnes2310qEmailUserAddress | read-write | current | The email address of the email user entry. |
| 1.3.6.1.4.1.5205.2.24.1.3.3 | Nodees2310qSMS | |||
| 1.3.6.1.4.1.5205.2.24.1.3.3.1 | Scalares2310qSMSServer | read-write | current | SMS server for alarm event. |
| 1.3.6.1.4.1.5205.2.24.1.3.3.2 | Scalares2310qSMSUsername | read-write | current | Username of SMS server. |
| 1.3.6.1.4.1.5205.2.24.1.3.3.3 | Scalares2310qSMSPassword | read-write | current | User password of SMS server. |
| 1.3.6.1.4.1.5205.2.24.1.3.3.4 | Scalares2310qSMSUserNumber | read-only | current | The number of the SMS users that you want to send the alarm notification. |
| 1.3.6.1.4.1.5205.2.24.1.3.3.5 | Tablees2310qSMSUserTable | not-accessible | current | A list of SMS user entry. The number of entries are given by the value of es2310qSMSUserNumber. |
| 1.3.6.1.4.1.5205.2.24.1.3.3.5.1 | Rowes2310qSMSUserEntry | not-accessible | current | Entry information for SMS user entry. |
| 1.3.6.1.4.1.5205.2.24.1.3.3.5.1.1 | Columnes2310qSMSUserIndex | read-only | current | The index of the SMS user entry. |
| 1.3.6.1.4.1.5205.2.24.1.3.3.5.1.2 | Columnes2310qSMSUserMobilePhone | read-write | current | The SMS phone number of the SMS user entry. |
| 1.3.6.1.4.1.5205.2.24.1.4 | Nodees2310qTftp | |||
| 1.3.6.1.4.1.5205.2.24.1.4.1 | Scalares2310qTftpServer | read-write | current | Get/Set the tftp server. |
| 1.3.6.1.4.1.5205.2.24.1.5 | Nodees2310qConfiguration | |||
| 1.3.6.1.4.1.5205.2.24.1.5.1 | Nodees2310qSaveRestore | |||
| 1.3.6.1.4.1.5205.2.24.1.5.1.1 | Scalares2310qSaveStart | read-write | current | Save current configuration into flash memory (start section). Get this oid always return zero. 1 - save. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.24.1.5.1.2 | Scalares2310qSaveUser | read-write | current | Save current configuration into flash memory (user config section). Get this oid always return zero. 1 - save. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.24.1.5.1.3 | Scalares2310qRestoreDefault | read-write | current | Restore factory default configuration. Get this oid always return zero. 2 - restore default included default ip address. 1 - restore default without changing c… |
| 1.3.6.1.4.1.5205.2.24.1.5.1.4 | Scalares2310qRestoreUser | read-write | current | Restore user configurtion. Get this oid always return zero. 1 - retore. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.24.1.5.2 | Nodees2310qConfigFile | |||
| 1.3.6.1.4.1.5205.2.24.1.5.2.1 | Scalares2310qExportConfigName | read-write | current | Get/Set export config file path and name. |
| 1.3.6.1.4.1.5205.2.24.1.5.2.2 | Scalares2310qDoExportConfig | read-write | current | Do export-config. Get this oid always return zero. 1 - export start section. 2 - export user-conf section. |
| 1.3.6.1.4.1.5205.2.24.1.5.2.3 | Scalares2310qImportConfigName | read-write | current | Get/Set export config file path and name. |
| 1.3.6.1.4.1.5205.2.24.1.5.2.4 | Scalares2310qDoImportConfig | read-write | current | Do import-config. Get this oid always return zero. 1 - import start section. 2 - import user-conf section. |
| 1.3.6.1.4.1.5205.2.24.1.6 | Nodees2310qDiagnostic | |||
| 1.3.6.1.4.1.5205.2.24.1.6.1 | Scalares2310qEEPROMTest | read-only | current | EEPROM access test. |
| 1.3.6.1.4.1.5205.2.24.1.6.2 | Scalares2310qUartTest | read-only | current | UART access test. |
| 1.3.6.1.4.1.5205.2.24.1.6.3 | Scalares2310qDramTest | read-only | current | DRAM access test. |
| 1.3.6.1.4.1.5205.2.24.1.6.4 | Scalares2310qFlashTest | read-only | current | Flash memory access test. |
| 1.3.6.1.4.1.5205.2.24.1.6.5 | Scalares2310qInternalLoopbackTest | read-only | current | Internel loopback test. |
| 1.3.6.1.4.1.5205.2.24.1.6.6 | Scalares2310qExternalLoopbackTest | read-only | current | Externel loopback test. |
| 1.3.6.1.4.1.5205.2.24.1.6.7 | Scalares2310qPingTest | read-write | current | Set the host address that you want to ping and the system will return the test result. |
| 1.3.6.1.4.1.5205.2.24.1.7 | Nodees2310qLog | |||
| 1.3.6.1.4.1.5205.2.24.1.7.1 | Scalares2310qClearLog | read-write | current | Clear system log. Get this oid always return zero. 1 - clear log. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.24.1.7.2 | Scalares2310qUploadLog | read-write | current | Upload current system log. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this oid always return zero.… |
| 1.3.6.1.4.1.5205.2.24.1.7.3 | Scalares2310qAutoUploadLogState | read-write | current | Enable log auto-upload function. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this oid always return… |
| 1.3.6.1.4.1.5205.2.24.1.7.4 | Scalares2310qLogNumber | read-only | current | Get the number of current system log. |
| 1.3.6.1.4.1.5205.2.24.1.7.5 | Tablees2310qLogTable | not-accessible | current | A list of log entry. The number of entries are given by the value of es2310qLogNumber. |
| 1.3.6.1.4.1.5205.2.24.1.7.5.1 | Rowes2310qLogEntry | not-accessible | current | Entry information for system log. |
| 1.3.6.1.4.1.5205.2.24.1.7.5.1.1 | Columnes2310qLogIndex | read-only | current | The index of the log entry. |
| 1.3.6.1.4.1.5205.2.24.1.7.5.1.2 | Columnes2310qLogEvent | read-only | current | The detail information of the log entry. |
| 1.3.6.1.4.1.5205.2.24.1.8 | Nodees2310qFirmware | |||
| 1.3.6.1.4.1.5205.2.24.1.8.1 | Scalares2310qFirmwareFileName | read-write | current | Get/Set the path and filename for firmware upgrading. |
| 1.3.6.1.4.1.5205.2.24.1.8.2 | Scalares2310qDoFirmwareUpgrade | read-write | current | Do firmware upgrade. Get this oid always return zero. 1 - do firmware upgrade. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.24.1.9 | Nodees2310qPort | |||
| 1.3.6.1.4.1.5205.2.24.1.9.1 | Nodees2310qPortStatus | |||
| 1.3.6.1.4.1.5205.2.24.1.9.1.1 | Scalares2310qPortStatusNumber | read-only | current | Get the number of port state. |
| 1.3.6.1.4.1.5205.2.24.1.9.1.2 | Tablees2310qPortStatusTable | not-accessible | current | A list of port status entry. The number of entries are given by the value of es2310qPortStatusNumber. |
| 1.3.6.1.4.1.5205.2.24.1.9.1.2.1 | Rowes2310qPortStatusEntry | not-accessible | current | Entry(s) for port status informaion. |
| 1.3.6.1.4.1.5205.2.24.1.9.1.2.1.1 | Columnes2310qPortStatusIndex | read-only | current | The index of the port status entry. |
| 1.3.6.1.4.1.5205.2.24.1.9.1.2.1.2 | Columnes2310qPortStatusMedia | read-only | current | The port media type of the port status entry. |
| 1.3.6.1.4.1.5205.2.24.1.9.1.2.1.3 | Columnes2310qPortStatusLink | read-only | current | The port link of the port status entry. |
| 1.3.6.1.4.1.5205.2.24.1.9.1.2.1.4 | Columnes2310qPortStatusPortState | read-only | current | The port state of the port status entry. |
| 1.3.6.1.4.1.5205.2.24.1.9.1.2.1.5 | Columnes2310qPortStatusAutoNego | read-only | current | The auto negotiation of the port status entry. |
| 1.3.6.1.4.1.5205.2.24.1.9.1.2.1.6 | Columnes2310qPortStatusSpdDpx | read-only | current | The speed/duplex of the port status entry. |
| 1.3.6.1.4.1.5205.2.24.1.9.1.2.1.7 | Columnes2310qPortStatusRxPause | read-only | current | The Rx Pause of the port status entry. |
| 1.3.6.1.4.1.5205.2.24.1.9.1.2.1.8 | Columnes2310qPortStatusTxPause | read-only | current | The Tx Pause of the port status entry. |
| 1.3.6.1.4.1.5205.2.24.1.9.1.2.1.9 | Columnes2310qPortStatusDescription | read-only | current | The description of port. |
| 1.3.6.1.4.1.5205.2.24.1.9.2 | Nodees2310qPortConf | |||
| 1.3.6.1.4.1.5205.2.24.1.9.2.1 | Scalares2310qPortConfNumber | read-only | current | Get the number of port configuration. |
| 1.3.6.1.4.1.5205.2.24.1.9.2.2 | Tablees2310qPortConfTable | not-accessible | current | A list of port configuration entry. The number of entries are given by the value of es2310qPortConfNumber. |
| 1.3.6.1.4.1.5205.2.24.1.9.2.2.1 | Rowes2310qPortConfEntry | not-accessible | current | Entry(s) for port configuration informaion. |
| 1.3.6.1.4.1.5205.2.24.1.9.2.2.1.1 | Columnes2310qPortConfIndex | read-only | current | The index of the port configuration entry. |
| 1.3.6.1.4.1.5205.2.24.1.9.2.2.1.2 | Columnes2310qPortConfPortState | read-write | current | The port state of the port configuration entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.24.1.9.2.2.1.3 | Columnes2310qPortConfSpdDpx | read-write | current | The speed/duplex of the port configuration entry. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/Full. |
| 1.3.6.1.4.1.5205.2.24.1.9.2.2.1.4 | Columnes2310qPortConfFlwCtrl | read-write | current | The flow control of the port configuration entry. 0 - asymmetric. 1 - symmetric. |
| 1.3.6.1.4.1.5205.2.24.1.9.2.2.1.5 | Columnes2310qPortConfDescription | read-write | current | The description of port. |
| 1.3.6.1.4.1.5205.2.24.1.20 | Nodees2310qTrapEntry | |||
| 1.3.6.1.4.1.5205.2.24.1.20.1 | Notificationes2310qModuleInserted | current | Send this trap when a moudle is inserted to the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.24.1.20.2 | Notificationes2310qModuleRemoved | current | Send this trap when a moudule is removed from the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.24.1.20.3 | Notificationes2310qDualMediaSwapped | current | Send this trap when the dual media port changed. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.24.1.20.4 | Notificationes2310qPoEFailure | current | Send this trap while detecting the malfunction of PoE chips. | |
| 1.3.6.1.4.1.5205.2.24.1.20.5 | Notificationes2310qLoopDetected | current | Send this trap when loop condition has been detected. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.24.1.20.5.1 | Scalares2310qLoopDetectedNumber | read-only | current | Get the number of loop detected entry. |
| 1.3.6.1.4.1.5205.2.24.1.20.5.2 | Tablees2310qLoopDetectedTable | not-accessible | current | A list of loop detected entry. The number of entries are given by the value of es2310qLoopDetectedNumber. |
| 1.3.6.1.4.1.5205.2.24.1.20.5.2.1 | Rowes2310qLoopDetectedEntry | not-accessible | current | Entry(s) for loop detected informaion. |
| 1.3.6.1.4.1.5205.2.24.1.20.5.2.1.1 | Columnes2310qLoopDetectedfIndex | read-only | current | The index of the loop detected entry. |
| 1.3.6.1.4.1.5205.2.24.1.20.5.2.1.2 | Columnes2310qLoopDetectedStateEbl | read-write | current | The state of the loop detected entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.24.1.20.5.2.1.3 | Columnes2310qLoopDetectedCurrentStatus | read-only | current | The current status of the loop detected port. 0 - unlocked 1 - locked due to the loop condition |
| 1.3.6.1.4.1.5205.2.24.1.20.5.2.1.4 | Columnes2310qLoopDetectedRemoved | read-write | current | unlock the port which is locked due to loop condition. Get this oid always return zero. 1 - unlock the port, 0 - do nothing |
| 1.3.6.1.4.1.5205.2.24.1.20.5.3 | Scalares2310qLoopDetectedAction | read-write | current | Set the corresponding action while loop is detected. 1 - locket the loop port, 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.24.1.20.100 | Notificationes2310qStpStateDisabled | current | Send this trap when the operational state of STP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.24.1.20.101 | Notificationes2310qStpStateEnabled | current | Send this trap when the operational state of STP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.24.1.20.102 | Notificationes2310qStpTopologyChanged | current | Send this trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces… | |
| 1.3.6.1.4.1.5205.2.24.1.20.110 | Notificationes2310qRmonRisingAlarm | current | Send this trap when an RMON rising alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that exceeds its own Risi… | |
| 1.3.6.1.4.1.5205.2.24.1.20.111 | Notificationes2310qRmonFallingAlarm | current | Send this trap when an RMON falling alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that is smaller than its… | |
| 1.3.6.1.4.1.5205.2.24.1.20.120 | Notificationes2310qLacpStateDisabled | current | Send this trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.24.1.20.121 | Notificationes2310qLacpStateEnabled | current | Send this trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.24.1.20.123 | Notificationes2310qLacpPortAdded | current | Send this trap when the state of port is in 'trunk ready'. | |
| 1.3.6.1.4.1.5205.2.24.1.20.124 | Notificationes2310qLacpPortTrunkFailure | current | Send this trap when one port is not able to be aggregated due to duplex-mode of the port. | |
| 1.3.6.1.4.1.5205.2.24.1.20.140 | Notificationes2310qGvrpStateDisabled | current | Send this trap when the operational state of GVRP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.24.1.20.141 | Notificationes2310qGvrpStateEnabled | current | Send this trap when the operational state of LACP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.24.1.20.151 | Notificationes2310qVlanPortBaseEnabled | current | Send this trap when the operational state of vlan is changed to port-based vlan. | |
| 1.3.6.1.4.1.5205.2.24.1.20.152 | Notificationes2310qVlanTagBaseEnabled | current | Send this trap when the operational state of vlan is changed to tag-based vlan. | |
| 1.3.6.1.4.1.5205.2.24.1.20.153 | Notificationes2310qVlanMetroBaseEnabled | current | Send this trap when the operational state of vlan is changed to metro-based vlan. | |
| 1.3.6.1.4.1.5205.2.24.1.20.200 | Notificationes2310qUserLogin | current | Send this trap when one user logins the system. | |
| 1.3.6.1.4.1.5205.2.24.1.20.201 | Notificationes2310qUserLogout | current | Send this trap when one user logouts the system. | |
| 1.3.6.1.4.1.5205.2.24.1.21 | Nodees2310qTrapVariable | |||
| 1.3.6.1.4.1.5205.2.24.1.21.1 | Scalarusername | read-only | current | System account name. |
| 1.3.6.1.4.1.5205.2.24.1.21.2 | ScalargroupId | read-only | current | The Trunk group ID of LACP. |
| 1.3.6.1.4.1.5205.2.24.1.21.3 | Scalaractorkey | read-only | current | The actor key information for LACP. |
| 1.3.6.1.4.1.5205.2.24.1.21.4 | Scalarpartnerkey | read-only | current | The partner key information for LACP. |
| 1.3.6.1.4.1.5205.2.24.1.21.5 | Scalaruplink | read-only | current | Uplink port(s) in the metro-mode vlan. |