RUBYTECH-ES2410C-MIB
588 objects
The MIB module is for Ruby Tech.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5205 | Identityrubytech | The MIB module is for Ruby Tech. | ||
| 1.3.6.1.4.1.5205.2 | Nodeswitch | |||
| 1.3.6.1.4.1.5205.2.35 | Nodees2410cProductID | |||
| 1.3.6.1.4.1.5205.2.35.1 | Nodees2410cProduces | |||
| 1.3.6.1.4.1.5205.2.35.1.1 | Nodees2410cSystem | |||
| 1.3.6.1.4.1.5205.2.35.1.1.1 | Nodees2410cCommonSys | |||
| 1.3.6.1.4.1.5205.2.35.1.1.1.1 | Scalares2410cReboot | read-write | current | Reboot the system. Get this OID always return zero. 0 - do nothing 1 - Reboot without saving start 2 - Reboot with saving start |
| 1.3.6.1.4.1.5205.2.35.1.1.1.2 | Scalares2410cBiosVsersion | read-only | current | Get the BIOS version of the system. |
| 1.3.6.1.4.1.5205.2.35.1.1.1.3 | Scalares2410cFirmwareVersion | read-only | current | Get the firmware version of the system. |
| 1.3.6.1.4.1.5205.2.35.1.1.1.4 | Scalares2410cHardwareVersion | read-only | current | Get the hardware version of the system. |
| 1.3.6.1.4.1.5205.2.35.1.1.1.5 | Scalares2410cMechanicalVersion | read-only | current | Get the mechanical version of the system. |
| 1.3.6.1.4.1.5205.2.35.1.1.1.6 | Scalares2410cSerialNumber | read-only | current | Get the Serial number of the system. |
| 1.3.6.1.4.1.5205.2.35.1.1.1.7 | Scalares2410cHostMacAddress | read-only | current | Get the MAC address of the system. |
| 1.3.6.1.4.1.5205.2.35.1.1.1.8 | Scalares2410cDevicePort | read-only | current | Get the quantity of ports that this system owns now. |
| 1.3.6.1.4.1.5205.2.35.1.1.1.9 | Scalares2410cRamSize | read-only | current | Get the RAM size of the system. |
| 1.3.6.1.4.1.5205.2.35.1.1.1.10 | Scalares2410cFlashSize | read-only | current | Get the flash size of the system. |
| 1.3.6.1.4.1.5205.2.35.1.1.1.11 | Scalares2410cCPULoad | read-only | current | Get the CPU load of the system. |
| 1.3.6.1.4.1.5205.2.35.1.1.2 | Nodees2410cIP | |||
| 1.3.6.1.4.1.5205.2.35.1.1.2.1 | Scalares2410cDhcpSetting | read-write | current | Get/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enable When DHCP Relay is already running. Please disable DHCP Relay first, and then enable DHCP a… |
| 1.3.6.1.4.1.5205.2.35.1.1.2.2 | Scalares2410cIPAddress | read-write | current | Get/Set the IP address of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.35.1.1.2.3 | Scalares2410cNetMask | read-write | current | Get/Set the subnet mask of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.35.1.1.2.4 | Scalares2410cDefaultGateway | read-write | current | Get/Set the default gateway of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.35.1.1.2.5 | Scalares2410cDnsSetting | read-write | current | Get/Set the source of DNS server. 0 - manual, the DNS server is from manual setting 1 - Auto, the DNS server is assigned by DHCP server. |
| 1.3.6.1.4.1.5205.2.35.1.1.2.6 | Scalares2410cDnsServer | read-write | current | Get/Set the DNS server of the system. |
| 1.3.6.1.4.1.5205.2.35.1.1.3 | Nodees2410cTime | |||
| 1.3.6.1.4.1.5205.2.35.1.1.3.1 | Scalares2410cSystemCurrentTime | read-only | current | Get the current time of the system. |
| 1.3.6.1.4.1.5205.2.35.1.1.3.2 | Scalares2410cManualTimeSetting | read-write | current | Get/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. Ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25. Value range: Y… |
| 1.3.6.1.4.1.5205.2.35.1.1.3.3 | Scalares2410cNTPServer | read-write | current | Get/Set the NTP Time Server. You can use the IP address or domain name. |
| 1.3.6.1.4.1.5205.2.35.1.1.3.4 | Scalares2410cNTPTimeZone | read-write | current | Get/Set the NTP Time Zone. Value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - GMT -… |
| 1.3.6.1.4.1.5205.2.35.1.1.3.5 | Scalares2410cNTPTimeSync | read-write | current | Sync time from NTP Server. Get this OID always return zero. Set the Time Server and Time Zone before doing time sync. Notice that time server must be correct! … |
| 1.3.6.1.4.1.5205.2.35.1.1.3.6 | Scalares2410cDaylightSavingTime | read-write | current | Get/Set the daylight saving time. Value range is between -5 and 5. Unit: hour. |
| 1.3.6.1.4.1.5205.2.35.1.1.3.7 | Scalares2410cDaylightStartTime | read-write | current | Get/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. Example: month/day/hour 10/01… |
| 1.3.6.1.4.1.5205.2.35.1.1.3.8 | Scalares2410cDaylightEndTime | read-write | current | Get/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. Example: month/day/hour 04/01/0… |
| 1.3.6.1.4.1.5205.2.35.1.1.4 | Nodees2410cAccount | |||
| 1.3.6.1.4.1.5205.2.35.1.1.4.1 | Scalares2410cAccountNumber | read-only | current | Get the current account number(s) of the system. |
| 1.3.6.1.4.1.5205.2.35.1.1.4.2 | Tablees2410cAccountTable | not-accessible | current | This is a list of es2410cAccountEntry. The numbers of entries are given by the value of es2410cAccountNumber. |
| 1.3.6.1.4.1.5205.2.35.1.1.4.2.1 | Rowes2410cAccountEntry | not-accessible | current | This is the Entry(s) for account information. |
| 1.3.6.1.4.1.5205.2.35.1.1.4.2.1.1 | Columnes2410cAccountIndex | read-only | current | This is the index of the account entry. |
| 1.3.6.1.4.1.5205.2.35.1.1.4.2.1.2 | Columnes2410cAccountAuthorization | read-only | current | This is the authorization of the account entry. |
| 1.3.6.1.4.1.5205.2.35.1.1.4.2.1.3 | Columnes2410cAccountName | read-write | current | This is the username of the account entry. |
| 1.3.6.1.4.1.5205.2.35.1.1.4.2.1.4 | Columnes2410cAccountPassword | read-write | current | This is the password of the account entry. The return value is always '********'. |
| 1.3.6.1.4.1.5205.2.35.1.1.4.3 | Scalares2410cAccountAddName | read-write | current | This is the account name for adding operation. |
| 1.3.6.1.4.1.5205.2.35.1.1.4.4 | Scalares2410cAccountAddPassword | read-write | current | This is the account password for adding operation. The return value is always '********'. |
| 1.3.6.1.4.1.5205.2.35.1.1.4.5 | Scalares2410cDoAccountAdd | read-write | current | Add account name. OID es2410cAccountAddName and es2410cAccountAddPassword must be filled first. Get this OID always return zero. 1 - Add account. 0 - do nothin… |
| 1.3.6.1.4.1.5205.2.35.1.1.4.6 | Scalares2410cAccountDel | read-write | current | Delete account. The value is valid es2410cAccountIndex(Can't delete administrator). |
| 1.3.6.1.4.1.5205.2.35.1.2 | Nodees2410cSnmp | |||
| 1.3.6.1.4.1.5205.2.35.1.2.1 | Scalares2410cGetCommunity | read-write | current | Get/Set the get-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.35.1.2.2 | Scalares2410cSetCommunity | read-write | current | Get/Set the set-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.35.1.2.3 | Scalares2410cTrapBootDelayTime | read-write | current | Get/Set trap boot delay time in second. Default: 0 |
| 1.3.6.1.4.1.5205.2.35.1.2.4 | Scalares2410cTrapHostNumber | read-only | current | Get the number of trap hosts. |
| 1.3.6.1.4.1.5205.2.35.1.2.5 | Tablees2410cTrapHostTable | not-accessible | current | A list of trap host entry. The numbers of entries are given by the value of es2410cTrapHostNumber. |
| 1.3.6.1.4.1.5205.2.35.1.2.5.1 | Rowes2410cTrapHostEntry | not-accessible | current | This is the entry information for trap host. |
| 1.3.6.1.4.1.5205.2.35.1.2.5.1.1 | Columnes2410cTrapHostIndex | read-only | current | The index of the trap host entry. |
| 1.3.6.1.4.1.5205.2.35.1.2.5.1.2 | Columnes2410cTrapHostIP | read-write | current | This is the IP of the trap host. |
| 1.3.6.1.4.1.5205.2.35.1.2.5.1.3 | Columnes2410cTrapHostPort | read-write | current | This is the receiving-port number of the trap host. |
| 1.3.6.1.4.1.5205.2.35.1.2.5.1.4 | Columnes2410cTrapHostCommunity | read-write | current | The community name for the trap PDU. |
| 1.3.6.1.4.1.5205.2.35.1.3 | Nodees2410cAlarm | |||
| 1.3.6.1.4.1.5205.2.35.1.3.1 | Nodees2410cEvent | |||
| 1.3.6.1.4.1.5205.2.35.1.3.1.1 | Scalares2410cEventNumber | read-only | current | Get the total number of alarm events. |
| 1.3.6.1.4.1.5205.2.35.1.3.1.2 | Tablees2410cEventTable | not-accessible | current | This is a list of alarm event entry. The numbers of entries are given by the value of es2410cEventNumber. |
| 1.3.6.1.4.1.5205.2.35.1.3.1.2.1 | Rowes2410cEventEntry | not-accessible | current | This is the entry information for alarm event. |
| 1.3.6.1.4.1.5205.2.35.1.3.1.2.1.1 | Columnes2410cEventIndex | read-only | current | This is the index of the alarm event entry. |
| 1.3.6.1.4.1.5205.2.35.1.3.1.2.1.2 | Columnes2410cEventName | read-only | current | This is the alarm event name. |
| 1.3.6.1.4.1.5205.2.35.1.3.1.2.1.3 | Columnes2410cEventSendEmail | read-write | current | Send email when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.35.1.3.1.2.1.4 | Columnes2410cEventSendTrap | read-write | current | Send trap when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.35.1.3.2 | Nodees2410cEmail | |||
| 1.3.6.1.4.1.5205.2.35.1.3.2.1 | Scalares2410cEmailServer | read-write | current | This is the SMTP server for alarm event. |
| 1.3.6.1.4.1.5205.2.35.1.3.2.2 | Scalares2410cEmailUsername | read-write | current | This is the Username of SMTP server. |
| 1.3.6.1.4.1.5205.2.35.1.3.2.3 | Scalares2410cEmailPassword | read-write | current | This is the User Password of SMTP server. |
| 1.3.6.1.4.1.5205.2.35.1.3.2.4 | Scalares2410cEmailSender | read-write | current | This is the Sender of SMTP server. |
| 1.3.6.1.4.1.5205.2.35.1.3.2.5 | Scalares2410cEmailReturnPath | read-write | current | This is the return path of mail. |
| 1.3.6.1.4.1.5205.2.35.1.3.2.6 | Scalares2410cEmailUserNumber | read-only | current | The number of the email users that you want to send the alarm notification. |
| 1.3.6.1.4.1.5205.2.35.1.3.2.7 | Tablees2410cEmailUserTable | not-accessible | current | This is a list of email user entry. The numbers of entries are given by the value of es2410cEmailUserNumber. |
| 1.3.6.1.4.1.5205.2.35.1.3.2.7.1 | Rowes2410cEmailUserEntry | not-accessible | current | This is the Entry information for email user entry. |
| 1.3.6.1.4.1.5205.2.35.1.3.2.7.1.1 | Columnes2410cEmailUserIndex | read-only | current | This is the index of the email user entry. |
| 1.3.6.1.4.1.5205.2.35.1.3.2.7.1.2 | Columnes2410cEmailUserAddress | read-write | current | This is the email address of the email user entry. |
| 1.3.6.1.4.1.5205.2.35.1.4 | Nodees2410cTftp | |||
| 1.3.6.1.4.1.5205.2.35.1.4.1 | Scalares2410cTftpServer | read-write | current | Get/Set the tftp server. |
| 1.3.6.1.4.1.5205.2.35.1.5 | Nodees2410cConfiguration | |||
| 1.3.6.1.4.1.5205.2.35.1.5.1 | Nodees2410cSaveRestore | |||
| 1.3.6.1.4.1.5205.2.35.1.5.1.1 | Scalares2410cSaveStart | read-write | current | Save current configuration into flash memory (Save as Start Configuration). Get this OID always return zero. 1 - Save. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.35.1.5.1.2 | Scalares2410cSaveUser | read-write | current | Save current configuration into flash memory (Save as User Configuration). Get this OID always return zero. 1 - Save. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.35.1.5.1.3 | Scalares2410cRestoreDefault | read-write | current | Restore factory default configuration. Get this OID always return zero. 2 - Restore default included default ip address. 1 - Restore default without changing c… |
| 1.3.6.1.4.1.5205.2.35.1.5.1.4 | Scalares2410cRestoreUser | read-write | current | Restore user configuration. Get this OID always return zero. 1 - Restore. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.35.1.5.2 | Nodees2410cConfigFile | |||
| 1.3.6.1.4.1.5205.2.35.1.5.2.1 | Scalares2410cExportConfigName | read-write | current | Get/Set the export file path and name. |
| 1.3.6.1.4.1.5205.2.35.1.5.2.2 | Scalares2410cDoExportConfig | read-write | current | Do export-config. Get this OID always return zero. 1 - Export start section. 2 - Export user-conf section. |
| 1.3.6.1.4.1.5205.2.35.1.5.2.3 | Scalares2410cImportConfigName | read-write | current | Get/Set the import file path and name. |
| 1.3.6.1.4.1.5205.2.35.1.5.2.4 | Scalares2410cDoImportConfig | read-write | current | Do import-config. Get this OID always return zero. 1 - Import start section. 2 - Import user-conf section. |
| 1.3.6.1.4.1.5205.2.35.1.6 | Nodees2410cDiagnostic | |||
| 1.3.6.1.4.1.5205.2.35.1.6.1 | Scalares2410cEEPROMTest | read-only | current | EEPROM access test. |
| 1.3.6.1.4.1.5205.2.35.1.6.2 | Scalares2410cUartTest | read-only | current | UART access test. |
| 1.3.6.1.4.1.5205.2.35.1.6.3 | Scalares2410cDramTest | read-only | current | DRAM access test. |
| 1.3.6.1.4.1.5205.2.35.1.6.4 | Scalares2410cFlashTest | read-only | current | Flash memory access test. |
| 1.3.6.1.4.1.5205.2.35.1.6.5 | Scalares2410cInternalLoopbackTest | read-only | current | Internal loop back test. |
| 1.3.6.1.4.1.5205.2.35.1.6.6 | Scalares2410cExternalLoopbackTest | read-only | current | External loop back test. |
| 1.3.6.1.4.1.5205.2.35.1.6.7 | Scalares2410cPingTest | read-write | current | Set the host address that you want to ping and the system will return the test result. |
| 1.3.6.1.4.1.5205.2.35.1.7 | Nodees2410cLog | |||
| 1.3.6.1.4.1.5205.2.35.1.7.1 | Scalares2410cClearLog | read-write | current | Clear system log. Get this OID always return zero. 1 - Clear log. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.35.1.7.2 | Scalares2410cUploadLog | read-write | current | Upload current system log. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return zero.… |
| 1.3.6.1.4.1.5205.2.35.1.7.3 | Scalares2410cAutoUploadLogState | read-write | current | Enable auto-upload log function. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this OID always return… |
| 1.3.6.1.4.1.5205.2.35.1.7.4 | Scalares2410cLogNumber | read-only | current | Get the number of current system log. |
| 1.3.6.1.4.1.5205.2.35.1.7.5 | Tablees2410cLogTable | not-accessible | current | This is a list of log entry. The numbers of entries are given by the value of es2410cLogNumber. |
| 1.3.6.1.4.1.5205.2.35.1.7.5.1 | Rowes2410cLogEntry | not-accessible | current | This is the Entry information for system log. |
| 1.3.6.1.4.1.5205.2.35.1.7.5.1.1 | Columnes2410cLogIndex | read-only | current | This is the index of the log entry. |
| 1.3.6.1.4.1.5205.2.35.1.7.5.1.2 | Columnes2410cLogEvent | read-only | current | This is the detail information of the log entry. |
| 1.3.6.1.4.1.5205.2.35.1.8 | Nodees2410cFirmware | |||
| 1.3.6.1.4.1.5205.2.35.1.8.1 | Scalares2410cFirmwareFileName | read-write | current | Get/Set the path and filename for firmware upgrading. |
| 1.3.6.1.4.1.5205.2.35.1.8.2 | Scalares2410cDoFirmwareUpgrade | read-write | current | Do firmware upgrade. Get this OID always return zero. 1 - Do firmware upgrade. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.35.1.9 | Nodees2410cPort | |||
| 1.3.6.1.4.1.5205.2.35.1.9.1 | Nodees2410cPortStatus | |||
| 1.3.6.1.4.1.5205.2.35.1.9.1.1 | Scalares2410cPortStatusNumber | read-only | current | Get the number of port. |
| 1.3.6.1.4.1.5205.2.35.1.9.1.2 | Tablees2410cPortStatusTable | not-accessible | current | This is a list of port status entry. The numbers of entries are given by the value of es2410cPortStatusNumber. |
| 1.3.6.1.4.1.5205.2.35.1.9.1.2.1 | Rowes2410cPortStatusEntry | not-accessible | current | This is the entry(s) for port status information. |
| 1.3.6.1.4.1.5205.2.35.1.9.1.2.1.1 | Columnes2410cPortStatusIndex | read-only | current | This is the index of the port status entry. |
| 1.3.6.1.4.1.5205.2.35.1.9.1.2.1.2 | Columnes2410cPortStatusMedia | read-only | current | This is the port media type of the port status entry. |
| 1.3.6.1.4.1.5205.2.35.1.9.1.2.1.3 | Columnes2410cPortStatusLink | read-only | current | This is the port link of the port status entry. |
| 1.3.6.1.4.1.5205.2.35.1.9.1.2.1.4 | Columnes2410cPortStatusPortState | read-only | current | This is the port state of the port status entry. |
| 1.3.6.1.4.1.5205.2.35.1.9.1.2.1.5 | Columnes2410cPortStatusAutoNego | read-only | current | This is the auto negotiation of the port status entry. |
| 1.3.6.1.4.1.5205.2.35.1.9.1.2.1.6 | Columnes2410cPortStatusSpdDpx | read-only | current | This is the speed/duplex of the port status entry. |
| 1.3.6.1.4.1.5205.2.35.1.9.1.2.1.7 | Columnes2410cPortStatusRxPause | read-only | current | The Rx Pause of the port status entry. |
| 1.3.6.1.4.1.5205.2.35.1.9.1.2.1.8 | Columnes2410cPortStatusTxPause | read-only | current | The Tx Pause of the port status entry. |
| 1.3.6.1.4.1.5205.2.35.1.9.1.2.1.9 | Columnes2410cPortStatusDescription | read-only | current | This is the description of port. |
| 1.3.6.1.4.1.5205.2.35.1.9.2 | Nodees2410cPortConf | |||
| 1.3.6.1.4.1.5205.2.35.1.9.2.1 | Scalares2410cPortConfNumber | read-only | current | Get the number of port configuration. |
| 1.3.6.1.4.1.5205.2.35.1.9.2.2 | Tablees2410cPortConfTable | not-accessible | current | This is a list of port configuration entry. The numbers of entries are given by the value of es2410cPortConfNumber. |
| 1.3.6.1.4.1.5205.2.35.1.9.2.2.1 | Rowes2410cPortConfEntry | not-accessible | current | This is the Entry(s) for port configuration information. |
| 1.3.6.1.4.1.5205.2.35.1.9.2.2.1.1 | Columnes2410cPortConfIndex | read-only | current | This is the index of the port configuration entry. |
| 1.3.6.1.4.1.5205.2.35.1.9.2.2.1.2 | Columnes2410cPortConfPortState | read-write | current | This is the port state of the port configuration entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.35.1.9.2.2.1.3 | Columnes2410cPortConfSpdDpx | read-write | current | This is the speed/duplex of the port configuration entry. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/Full. 5 - 1G/Full. |
| 1.3.6.1.4.1.5205.2.35.1.9.2.2.1.4 | Columnes2410cPortConfFlwCtrl | read-write | current | This is the flow control of the port configuration entry. 0 - disable 1 - symmetric. 2 - asymmetric. |
| 1.3.6.1.4.1.5205.2.35.1.9.2.2.1.5 | Columnes2410cPortConfPowerSaving | read-write | current | This is the power saving of the port configuration entry. 0 - disable 1 - enable. |
| 1.3.6.1.4.1.5205.2.35.1.9.2.2.1.6 | Columnes2410cPortConfDescription | read-write | current | This is the description of port. |
| 1.3.6.1.4.1.5205.2.35.1.9.3 | Nodees2410cPortBandwidth | |||
| 1.3.6.1.4.1.5205.2.35.1.9.3.1 | Scalares2410cPortBandwidthNumber | read-only | current | Get the number of port bandwidth number. |
| 1.3.6.1.4.1.5205.2.35.1.9.3.2 | Tablees2410cPortBandwidthTable | not-accessible | current | A list of port bandwidth entry. The number of entries are given by the value of es2410cPortBandwidthNumber. |
| 1.3.6.1.4.1.5205.2.35.1.9.3.2.1 | Rowes2410cPortBandwidthEntry | not-accessible | current | Entry(s) for port bandwidth informaion. |
| 1.3.6.1.4.1.5205.2.35.1.9.3.2.1.1 | Columnes2410cPortBandwidthIndex | read-only | current | The index of the port bandwidth entry. |
| 1.3.6.1.4.1.5205.2.35.1.9.3.2.1.2 | Columnes2410cPortBandwidthIngressRate | read-write | current | The Ingress rate(64~1024000) of the Bandwidth configuration. |
| 1.3.6.1.4.1.5205.2.35.1.9.3.2.1.3 | Columnes2410cPortBandwidthEgressRate | read-write | current | The Egress rate(64~1024000) of the Bandwidth configuration. |
| 1.3.6.1.4.1.5205.2.35.1.9.3.2.1.4 | Columnes2410cPortBandwidthStormType | read-write | current | The storm type of the Bandwidth configuration. 0 - Disable. 1 - BC. 2 - UC. 3 - BC,UC. 4 - MC. 5 - BC,MC. 6 - UC,MC. 7 - BC,UC,MC. |
| 1.3.6.1.4.1.5205.2.35.1.9.3.2.1.5 | Columnes2410cPortBandwidthStormRate | read-write | current | The storm rate(64~1024000) of the Bandwidth configuration. |
| 1.3.6.1.4.1.5205.2.35.1.9.4 | Nodees2410cPortSFPInfo | |||
| 1.3.6.1.4.1.5205.2.35.1.9.4.1 | Scalares2410cPortSFPInfoNumber | read-only | current | Get the number of sfp info entry. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2 | Tablees2410cPortSFPInfoTable | not-accessible | current | A list of sfp info entry. The numbers of entries are given by the value of es2410cPortSFPInfoNumber. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2.1 | Rowes2410cPortSFPInfoEntry | not-accessible | current | Entry(s) for SFP information. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2.1.1 | Columnes2410cPortSFPInfoIndex | read-only | current | The index of the sfp info entry. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2.1.2 | Columnes2410cPortSFPConnectorType | read-only | current | Get connector type of the sfp. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2.1.3 | Columnes2410cPortSFPFiberType | read-only | current | Get fiber type of the sfp. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2.1.4 | Columnes2410cPortSFPWavelength | read-only | current | Get tx central wavelength of the sfp. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2.1.5 | Columnes2410cPortSFPBaudRate | read-only | current | Get baud rate of the sfp. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2.1.6 | Columnes2410cPortSFPVendorOUI | read-only | current | Get vendor OUI of the sfp. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2.1.7 | Columnes2410cPortSFPVendorName | read-only | current | Get vendor name of the sfp. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2.1.8 | Columnes2410cPortSFPVendorPN | read-only | current | Get vendor part number of the sfp. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2.1.9 | Columnes2410cPortSFPVendorRev | read-only | current | Get vendor revision number of the sfp. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2.1.10 | Columnes2410cPortSFPVendorSN | read-only | current | Get vendor serial number of the sfp. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2.1.11 | Columnes2410cPortSFPDateCode | read-only | current | Get data code of the sfp. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2.1.12 | Columnes2410cPortSFPTemperature | read-only | current | Get current temperature of the sfp. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2.1.13 | Columnes2410cPortSFPVcc | read-only | current | Get current internal supply voltage of the sfp. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2.1.14 | Columnes2410cPortSFPTxBias | read-only | current | Get current TX Bias of the sfp. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2.1.15 | Columnes2410cPortSFPTxPWR | read-only | current | Get current TX output power of the sfp. |
| 1.3.6.1.4.1.5205.2.35.1.9.4.2.1.16 | Columnes2410cPortSFPRxPWR | read-only | current | Get current Received Power of the sfp. |
| 1.3.6.1.4.1.5205.2.35.1.10 | Nodees2410cLoopDetectedConf | |||
| 1.3.6.1.4.1.5205.2.35.1.10.1 | Scalares2410cLoopDetectedNumber | read-only | current | Get the number of loop detected entry. |
| 1.3.6.1.4.1.5205.2.35.1.10.2 | Tablees2410cLoopDetectedTable | not-accessible | current | This is a list of loop detected entry. The numbers of entries are given by the value of es2410cLoopDetectedNumber. |
| 1.3.6.1.4.1.5205.2.35.1.10.2.1 | Rowes2410cLoopDetectedEntry | not-accessible | current | Entry(s) for loop detected information. |
| 1.3.6.1.4.1.5205.2.35.1.10.2.1.1 | Columnes2410cLoopDetectedfIndex | read-only | current | This is the index of the loop detected entry. |
| 1.3.6.1.4.1.5205.2.35.1.10.2.1.2 | Columnes2410cLoopDetectedStateEbl | read-write | current | The state of the loop detected entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.35.1.10.2.1.3 | Columnes2410cLoopDetectedCurrentStatus | read-only | current | The current status of the loop detected port. 0 - unlocked 1 - Locked due to the loop condition |
| 1.3.6.1.4.1.5205.2.35.1.10.2.1.4 | Columnes2410cLoopDetectedResumed | read-write | current | Unlock the port which is locked due to loop condition. Get this OID always return zero. 1 - Unlock the port, 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.35.1.10.3 | Scalares2410cLoopDetectedAction | read-write | current | Set the corresponding action while loop is detected. 1 - Lock the loop port, 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.35.1.11 | Nodees2410cIpMacBind | |||
| 1.3.6.1.4.1.5205.2.35.1.11.1 | Nodees2410cIpMacBindStatus | |||
| 1.3.6.1.4.1.5205.2.35.1.11.1.1 | Scalares2410cIpMacBindMode | read-write | current | Set the IP-MAC Binding State. 1 - Enable, 0 - Disable. |
| 1.3.6.1.4.1.5205.2.35.1.11.1.2 | Scalares2410cIpMacBindPort | read-write | current | Set the IP-MAC Binding Port. Syntax: 1,5-7, available from 1 to 10. |
| 1.3.6.1.4.1.5205.2.35.1.11.1.3 | Scalares2410cIpMacBindCount | read-only | current | Get the current IP-MAC Binding user count. |
| 1.3.6.1.4.1.5205.2.35.1.11.1.4 | Tablees2410cIpMacBindStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.11.1.4.1 | Rowes2410cIpMacBindStatusEntry | not-accessible | current | Entry(s) for IP-MAC Binding Status. |
| 1.3.6.1.4.1.5205.2.35.1.11.1.4.1.1 | Columnes2410cIpMacBindStatusIndex | read-only | current | The index of the IP-MAC Binding entry. |
| 1.3.6.1.4.1.5205.2.35.1.11.1.4.1.2 | Columnes2410cIpMacBindStatusName | read-only | current | Get the name of this IP-MAC binding entry. |
| 1.3.6.1.4.1.5205.2.35.1.11.1.4.1.3 | Columnes2410cIpMacBindStatusMac | read-only | current | Get the MAC address of this IP-MAC binding entry. |
| 1.3.6.1.4.1.5205.2.35.1.11.1.4.1.4 | Columnes2410cIpMacBindStatusIp | read-only | current | Get the IP address of this IP-MAC binding entry. |
| 1.3.6.1.4.1.5205.2.35.1.11.1.4.1.5 | Columnes2410cIpMacBindStatusPort | read-only | current | Get the binding port of this IP-MAC binding entry. |
| 1.3.6.1.4.1.5205.2.35.1.11.1.4.1.6 | Columnes2410cIpMacBindStatusBindingMethod | read-only | current | Get the binding method of this IP-MAC binding entry. 0 : IP-MAC, 1 : IP, 2 : MAC |
| 1.3.6.1.4.1.5205.2.35.1.11.1.4.1.7 | Columnes2410cIpMacBindStatusType | read-only | current | Get the status of this IP-MAC binding entry. 0: Static 1: Dynamic |
| 1.3.6.1.4.1.5205.2.35.1.11.2 | Nodees2410cIpMacBindConf | |||
| 1.3.6.1.4.1.5205.2.35.1.11.2.1 | Scalares2410cIpMacBindConfName | read-write | current | Set the name of a IP-MAC binding entry. |
| 1.3.6.1.4.1.5205.2.35.1.11.2.2 | Scalares2410cIpMacBindConfMac | read-write | current | Set the MAC address of a IP-MAC binding entry. |
| 1.3.6.1.4.1.5205.2.35.1.11.2.3 | Scalares2410cIpMacBindConfIp | read-write | current | Set the IP address of a IP-MAC binding entry. |
| 1.3.6.1.4.1.5205.2.35.1.11.2.4 | Scalares2410cIpMacBindConfPort | read-write | current | Set the binding port of a IP-MAC binding entry. Port_range: range syntax: 1,5-7, available from 1 to 10 |
| 1.3.6.1.4.1.5205.2.35.1.11.2.5 | Scalares2410cIpMacBindBindingMethod | read-write | current | Set the binding method of a IP-MAC binding entry. 0 : IP-MAC, 1 : IP, 2 : MAC. |
| 1.3.6.1.4.1.5205.2.35.1.11.2.6 | Scalares2410cAddIpMacBindConf | read-write | current | Perform the operation of adding a IP-MAC binding entry. 0 : None, 1 : Add |
| 1.3.6.1.4.1.5205.2.35.1.11.2.7 | Scalares2410cIpMacBindConfDelByIp | read-write | current | Delete the IP-MAC binding entry(s) by the specific IP address. |
| 1.3.6.1.4.1.5205.2.35.1.11.2.8 | Scalares2410cIpMacBindConfDelByMac | read-write | current | Delete the IP-MAC binding entry(s) by the specific MAC address. |
| 1.3.6.1.4.1.5205.2.35.1.11.2.9 | Scalares2410cIpMacBindConfDelByName | read-write | current | Delete the IP-MAC binding entry(s) by the specific entry name. |
| 1.3.6.1.4.1.5205.2.35.1.12 | Nodees2410cMacTableInfo | |||
| 1.3.6.1.4.1.5205.2.35.1.12.1 | Nodees2410cMacTableMaintenance | |||
| 1.3.6.1.4.1.5205.2.35.1.12.1.1 | Scalares2410cMacTableAgingTime | read-write | current | Set the Mac Table Aging Time (10~1000000 Secs). 0 : Disable. |
| 1.3.6.1.4.1.5205.2.35.1.12.1.2 | Scalares2410cMacTableFlush | read-write | current | 1 : Flush Mac Table. |
| 1.3.6.1.4.1.5205.2.35.1.12.1.3 | Tablees2410cMacTableLearnPortLimitTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.12.1.3.1 | Rowes2410cMacTableLearnPortLimitEntry | not-accessible | current | Entry(s) for Mac Table Port Learning Limit. |
| 1.3.6.1.4.1.5205.2.35.1.12.1.3.1.1 | Columnes2410cMacTableLearnPortLimitIndex | read-only | current | The index of the Mac Table Learning Limit entry. |
| 1.3.6.1.4.1.5205.2.35.1.12.1.3.1.2 | Columnes2410cMacTableLearnPortLimit | read-write | current | Port Learning Limit (0~8191). |
| 1.3.6.1.4.1.5205.2.35.1.12.2 | Nodees2410cMacTableStaticMac | |||
| 1.3.6.1.4.1.5205.2.35.1.12.2.1 | Scalares2410cMacTableStaticMacNumber | read-write | current | Static Mac Total Nnumber(0~1024). |
| 1.3.6.1.4.1.5205.2.35.1.12.2.2 | Tablees2410cMacTableStaticMacTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.12.2.2.1 | Rowes2410cMacTableStaticMacEntry | not-accessible | current | Entry(s) for Static Mac Table. |
| 1.3.6.1.4.1.5205.2.35.1.12.2.2.1.1 | Columnes2410cMacTableStaticMacIndex | not-accessible | current | The index of the static mac table entry. |
| 1.3.6.1.4.1.5205.2.35.1.12.2.2.1.2 | Columnes2410cMacTableStaticMacAddress | read-only | current | The mac address of the static mac table entry. |
| 1.3.6.1.4.1.5205.2.35.1.12.2.2.1.3 | Columnes2410cMacTableStaticMacVid | read-only | current | The vlan id of the static mac table entry. |
| 1.3.6.1.4.1.5205.2.35.1.12.2.2.1.4 | Columnes2410cMacTableStaticMacRule | read-only | current | The forwarding rule of the static mac table entry. 0 : static, 1 : Static with Destination Drop, 2 : Static with Source Drop |
| 1.3.6.1.4.1.5205.2.35.1.12.2.2.1.5 | Columnes2410cMacTableStaticMacPort | read-only | current | The port of the static mac table entry. |
| 1.3.6.1.4.1.5205.2.35.1.12.3 | Nodees2410cMacTableStaticMacConfig | |||
| 1.3.6.1.4.1.5205.2.35.1.12.3.1 | Scalares2410cMacTableStaticMacAddMac | read-write | current | Add static mac address in temp. |
| 1.3.6.1.4.1.5205.2.35.1.12.3.2 | Scalares2410cMacTableStaticMacAddVid | read-write | current | Add vid in temp. |
| 1.3.6.1.4.1.5205.2.35.1.12.3.3 | Scalares2410cMacTableStaticMacAddRule | read-write | current | Add forwarding rule in temp. 0 : static, 1 : Static with Destination Drop, 2 : Static with Source Drop |
| 1.3.6.1.4.1.5205.2.35.1.12.3.4 | Scalares2410cMacTableStaticMacAddPort | read-write | current | Add port in temp. |
| 1.3.6.1.4.1.5205.2.35.1.12.3.5 | Scalares2410cMacTableStaticMacAddDo | read-write | current | Add this temp in Static Mac Table. |
| 1.3.6.1.4.1.5205.2.35.1.12.3.6 | Scalares2410cMacTableStaticMacDeleteMac | read-write | current | Delete a static mac by mac address. |
| 1.3.6.1.4.1.5205.2.35.1.12.3.7 | Scalares2410cMacTableStaticMacDeleteDo | read-write | current | Delete this mac entry |
| 1.3.6.1.4.1.5205.2.35.1.12.4 | Nodees2410cMacTableMacAlias | |||
| 1.3.6.1.4.1.5205.2.35.1.12.4.1 | Scalares2410cMacTableMacAliasNumber | read-write | current | Mac Alias Total Nnumber(0~1024). |
| 1.3.6.1.4.1.5205.2.35.1.12.4.2 | Tablees2410cMacTableMacAliasTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.12.4.2.1 | Rowes2410cMacTableMacAliasEntry | not-accessible | current | Entry(s) for Mac Alias. |
| 1.3.6.1.4.1.5205.2.35.1.12.4.2.1.1 | Columnes2410cMacTableMacAliasIndex | not-accessible | current | The index of the static mac alias entry. |
| 1.3.6.1.4.1.5205.2.35.1.12.4.2.1.2 | Columnes2410cMacTableMacAliasAddress | read-only | current | The mac address of the mac alias table entry. |
| 1.3.6.1.4.1.5205.2.35.1.12.4.2.1.3 | Columnes2410cMacTableMacAliasAlias | read-write | current | The alias of the mac alias table entry. |
| 1.3.6.1.4.1.5205.2.35.1.12.4.3 | Scalares2410cMacTableMacAliasAddAddress | read-write | current | Add address in mac alias temp entry |
| 1.3.6.1.4.1.5205.2.35.1.12.4.4 | Scalares2410cMacTableMacAliasAddAlias | read-write | current | Add alias in mac alias temp entry |
| 1.3.6.1.4.1.5205.2.35.1.12.4.5 | Scalares2410cMacTableMacAliasAddDo | read-write | current | Add temp entry in mac alias table. 0 : None 1 : Add |
| 1.3.6.1.4.1.5205.2.35.1.12.4.6 | Scalares2410cMacTableMacAliasDeleteAddress | read-write | current | Set the address of mac alias table that you want to delete. |
| 1.3.6.1.4.1.5205.2.35.1.12.4.7 | Scalares2410cMacTableMacAliasDeleteDo | read-write | current | Delete the mac alias entry by es2410cMacTableMacAliasDeleteAddress 0 : None 1 : Delete |
| 1.3.6.1.4.1.5205.2.35.1.13 | Nodees2410cSecurity | |||
| 1.3.6.1.4.1.5205.2.35.1.13.1 | Nodees2410cMirror | |||
| 1.3.6.1.4.1.5205.2.35.1.13.1.1 | Scalares2410cMirrorMode | read-write | current | Set the Mirror Enable/Disable Mode. 0 : Mirror Disable, 1 : Mirror Enable. |
| 1.3.6.1.4.1.5205.2.35.1.13.1.2 | Scalares2410cMonitoringPort | read-write | current | Set the Mirror Monitoring Port.(1~10) |
| 1.3.6.1.4.1.5205.2.35.1.13.1.3 | Scalares2410cMonitoredIngressPort | read-write | current | Set monitored ingress port; range syntax: 1,5-7, available from 0 to 10. 0 : Ingress Disable, 1~10 : Ingress Enable. |
| 1.3.6.1.4.1.5205.2.35.1.13.1.4 | Scalares2410cMonitoredEgressPort | read-write | current | Set monitored egress port; range syntax: 1,5-7, available from 0 to 10. 0 : Egress Disable, 1~10 : Egress Enable. |
| 1.3.6.1.4.1.5205.2.35.1.13.2 | Nodees2410cIsolatedGroup | |||
| 1.3.6.1.4.1.5205.2.35.1.13.2.1 | Scalares2410cIsolatedPortGroup | read-write | current | Set the Isolated Group; range syntax: 1,5-7, available from 0 to 10. 0 : Isolated Group Disable, 1~10 : Isolated Group Enable |
| 1.3.6.1.4.1.5205.2.35.1.14 | Nodees2410cVirtualStack | |||
| 1.3.6.1.4.1.5205.2.35.1.14.1 | Scalares2410cVirtualStackState | read-write | current | Set the Virtual Stack State. 0 : disable, 1 : enable |
| 1.3.6.1.4.1.5205.2.35.1.14.2 | Scalares2410cVirtualStackRole | read-write | current | Set the Virtual Stack Role. 0 : slave, 1 : master |
| 1.3.6.1.4.1.5205.2.35.1.14.3 | Scalares2410cVirtualStackGroupID | read-write | current | Set the Virtual Stack Group ID. |
| 1.3.6.1.4.1.5205.2.35.1.15 | Nodees2410cManagementSecurity | |||
| 1.3.6.1.4.1.5205.2.35.1.15.1 | Scalares2410cManagementSecurityNumber | read-only | current | The Number of Management Security Entry. |
| 1.3.6.1.4.1.5205.2.35.1.15.2 | Tablees2410cManagementSecurityTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.15.2.1 | Rowes2410cManagementSecurityEntry | not-accessible | current | Entry(s) for Management Security. |
| 1.3.6.1.4.1.5205.2.35.1.15.2.1.1 | Columnes2410cManagementSecurityIndex | not-accessible | current | The index of management security entry. |
| 1.3.6.1.4.1.5205.2.35.1.15.2.1.2 | Columnes2410cManagementSecurityName | read-only | current | The name of management security entry. |
| 1.3.6.1.4.1.5205.2.35.1.15.2.1.3 | Columnes2410cManagementSecurityVid | read-write | current | The vid of management security entry. vid 0 : Any. |
| 1.3.6.1.4.1.5205.2.35.1.15.2.1.4 | Columnes2410cManagementSecurityIpRange | read-write | current | The ip range of management security entry(StartIP-EndIP). ex : 192.168.1.1-192.168.1.255, 0 : any. |
| 1.3.6.1.4.1.5205.2.35.1.15.2.1.5 | Columnes2410cManagementSecurityIncomigPort | read-write | current | The incoming Port of management security entry. range syntax: 1,5-7, available from 0 to 10, 0 : Any. |
| 1.3.6.1.4.1.5205.2.35.1.15.2.1.6 | Columnes2410cManagementSecurityAccessType | read-write | current | The access type of management security entry. range syntax: 1,3 or 1-3, available from 0 to 3. 0 : Any, 1 : http, 2 : telnet, 3 : snmp |
| 1.3.6.1.4.1.5205.2.35.1.15.2.1.7 | Columnes2410cManagementSecurityAction | read-write | current | The action of management security entry. 0 : deny, 1 : accept. |
| 1.3.6.1.4.1.5205.2.35.1.15.2.1.8 | Columnes2410cManagementSecurityDelete | read-write | current | 0 : None, 1 : Delete this entry. |
| 1.3.6.1.4.1.5205.2.35.1.15.3 | Scalares2410cManagementSecurityAddName | read-write | current | set name of management security new entry. |
| 1.3.6.1.4.1.5205.2.35.1.15.4 | Scalares2410cManagementSecurityAddVid | read-write | current | set vid of management security new entry. vid 0 : Any. |
| 1.3.6.1.4.1.5205.2.35.1.15.5 | Scalares2410cManagementSecurityAddIpRange | read-write | current | Set ip range of management security new entry(StartIP-EndIP). ex : 192.168.1.1-192.168.1.255, 0 : any. |
| 1.3.6.1.4.1.5205.2.35.1.15.6 | Scalares2410cManagementSecurityAddIncomigPort | read-write | current | Set incoming Port of management security new entry. range syntax: 1,5-7, available from 0 to 10, 0 : Any. |
| 1.3.6.1.4.1.5205.2.35.1.15.7 | Scalares2410cManagementSecurityAddAccessType | read-write | current | Set access type of management security new entry. range syntax: 1,3 or 1-3, available from 0 to 3. 0 : Any, 1 : http, 2 : telnet, 3 : snmp |
| 1.3.6.1.4.1.5205.2.35.1.15.8 | Scalares2410cManagementSecurityAddAction | read-write | current | Set action of management security new entry. 0 : deny, 1 : accept. |
| 1.3.6.1.4.1.5205.2.35.1.15.9 | Scalares2410cManagementSecurityAddDo | read-write | current | Add management security new entry. 0 : not add, 1 : add. |
| 1.3.6.1.4.1.5205.2.35.1.16 | Nodees2410cQoS | |||
| 1.3.6.1.4.1.5205.2.35.1.16.1 | Nodees2410cQoSGlobalConfig | |||
| 1.3.6.1.4.1.5205.2.35.1.16.1.1 | Scalares2410cQoSMode | read-write | current | Set the Qos Mode Enable/Disable. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.35.1.16.1.2 | Scalares2410cQoS1PEnable | read-write | current | Set the Qos 802.1P Enable/Disable. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.35.1.16.1.3 | Scalares2410cQoSDSCPEnable | read-write | current | Set the Qos DSCP Enable/Disable. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.35.1.16.1.4 | Scalares2410cQoSSchedulingMethod | read-write | current | Set the Qos Scheduling Method(0~3). 0 : 4 WRR 1 : 1 Strict, 3 WRR 2 : 2 Strict, 2 WRR 3 : 4 Strict |
| 1.3.6.1.4.1.5205.2.35.1.16.1.5 | Scalares2410cQoSWeightQ0 | read-write | current | Set the Qos Queue 0 Weight(1~55). |
| 1.3.6.1.4.1.5205.2.35.1.16.1.6 | Scalares2410cQoSWeightQ1 | read-write | current | Set the Qos Queue 1 Weight(1~55). |
| 1.3.6.1.4.1.5205.2.35.1.16.1.7 | Scalares2410cQoSWeightQ2 | read-write | current | Set the Qos Queue 2 Weight(1~55). |
| 1.3.6.1.4.1.5205.2.35.1.16.1.8 | Scalares2410cQoSWeightQ3 | read-write | current | Set the Qos Queue 3 Weight(1~55). |
| 1.3.6.1.4.1.5205.2.35.1.16.2 | Nodees2410cQoS1PPriority | |||
| 1.3.6.1.4.1.5205.2.35.1.16.2.1 | Tablees2410cQoS1PPriorityTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.16.2.1.1 | Rowes2410cQoS1PPriorityEntry | not-accessible | current | Entry(s) for QoS 802.1P Priority. |
| 1.3.6.1.4.1.5205.2.35.1.16.2.1.1.1 | Columnes2410cQoS1PPriorityIndex | not-accessible | current | The Priority index of QoS 802.1P Priority entry. |
| 1.3.6.1.4.1.5205.2.35.1.16.2.1.1.2 | Columnes2410cQoS1PPriorityValue | read-only | current | The Priority value of QoS 802.1P Priority entry. |
| 1.3.6.1.4.1.5205.2.35.1.16.2.1.1.3 | Columnes2410cQoS1PPriorityQueue | read-write | current | The Queue(0~3) of QoS 802.1P Priority. |
| 1.3.6.1.4.1.5205.2.35.1.16.3 | Nodees2410cQoSDSCPPriority | |||
| 1.3.6.1.4.1.5205.2.35.1.16.3.1 | Tablees2410cQoSDSCPPriorityTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.16.3.1.1 | Rowes2410cQoSDSCPPriorityEntry | not-accessible | current | Entry(s) for QoS DSCP Priority. |
| 1.3.6.1.4.1.5205.2.35.1.16.3.1.1.1 | Columnes2410cQoSDSCPPriorityIndex | not-accessible | current | The Priority index of QoS DSCP Priority entry. |
| 1.3.6.1.4.1.5205.2.35.1.16.3.1.1.2 | Columnes2410cQoSDSCPPriorityValue | read-only | current | The Priority value of QoS DSCP Priority entry. |
| 1.3.6.1.4.1.5205.2.35.1.16.3.1.1.3 | Columnes2410cQoSDSCPPriorityQueue | read-write | current | The Queue(0~3) of QoS DSCP Priority. |
| 1.3.6.1.4.1.5205.2.35.1.17 | Nodees2410cVlan | |||
| 1.3.6.1.4.1.5205.2.35.1.17.1 | Nodees2410cVlanModeConfig | |||
| 1.3.6.1.4.1.5205.2.35.1.17.1.1 | Scalares2410cVlanMode | read-write | current | 0:Tag-based, 1:Port-based, 2:Metro mode |
| 1.3.6.1.4.1.5205.2.35.1.17.1.2 | Scalares2410cSymmetricVlan | read-write | current | 0:disable, 1:enable |
| 1.3.6.1.4.1.5205.2.35.1.17.1.3 | Scalares2410cVlanSVL | read-write | current | 0:disable, 1:enable |
| 1.3.6.1.4.1.5205.2.35.1.17.1.4 | Scalares2410cDoubleTag | read-write | current | 0 : disable, 1 : enable SP-tag 0x88A8, 2 : enable SP-tag 0x8100 |
| 1.3.6.1.4.1.5205.2.35.1.17.1.5 | Scalares2410cSpPortMember | read-write | current | The member of Service Provider Port. Port range syntax: 1,5-7, available from 1 to 10 |
| 1.3.6.1.4.1.5205.2.35.1.17.1.6 | Scalares2410cUpLinkPort | read-write | current | 0:Port 9, 1:Port 10, 2:Port 9 & 10 |
| 1.3.6.1.4.1.5205.2.35.1.17.2 | Nodees2410cVlanPvid | |||
| 1.3.6.1.4.1.5205.2.35.1.17.2.1 | Tablees2410cVlanPvidTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.17.2.1.1 | Rowes2410cVlanPvidEntry | not-accessible | current | Entry(s) for Vlan Pvid. |
| 1.3.6.1.4.1.5205.2.35.1.17.2.1.1.1 | Columnes2410cVlanPvidPort | not-accessible | current | The port number of pvid entry. |
| 1.3.6.1.4.1.5205.2.35.1.17.2.1.1.2 | Columnes2410cVlanPvidValue | read-write | current | The pvid value of port. |
| 1.3.6.1.4.1.5205.2.35.1.17.2.1.1.3 | Columnes2410cVlanPvidDefaultPriority | read-write | current | The default priority of port . |
| 1.3.6.1.4.1.5205.2.35.1.17.2.1.1.4 | Columnes2410cVlanPvidDropUntag | read-write | current | The drop untag of port . |
| 1.3.6.1.4.1.5205.2.35.1.17.3 | Nodees2410cPortBasedVlanGroup | |||
| 1.3.6.1.4.1.5205.2.35.1.17.3.1 | Scalares2410cPortBasedVlanNumbers | read-only | current | Total numbers for tag-based vlan. |
| 1.3.6.1.4.1.5205.2.35.1.17.3.2 | Scalares2410cPortBasedCreateStatus | read-write | current | Creat a temp vlan in port-based vlan table. 0 : none, 1 : creat a new port-based vlan. |
| 1.3.6.1.4.1.5205.2.35.1.17.3.3 | Tablees2410cPortBasedVlanTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.17.3.3.1 | Rowes2410cPortBasedVlanEntry | not-accessible | current | Entry(s) for port-based vlan table. |
| 1.3.6.1.4.1.5205.2.35.1.17.3.3.1.1 | Columnes2410cPortBasedVlanIndex | not-accessible | current | The index of vlan. |
| 1.3.6.1.4.1.5205.2.35.1.17.3.3.1.2 | Columnes2410cPortBasedVlanName | read-write | current | The name of vlan. |
| 1.3.6.1.4.1.5205.2.35.1.17.3.3.1.3 | Columnes2410cPortBasedVlanMember | read-write | current | The member of vlan. |
| 1.3.6.1.4.1.5205.2.35.1.17.3.3.1.4 | Columnes2410cPortBasedVlanRowStatus | read-write | current | The row status of vlan. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.5205.2.35.1.17.4 | Nodees2410cManagementVlan | |||
| 1.3.6.1.4.1.5205.2.35.1.17.4.1 | Scalares2410cManagementVlanState | read-write | current | The stat of management vlan. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.35.1.17.4.2 | Scalares2410cManagementVlanVid | read-write | current | The vid value of management vlan. |
| 1.3.6.1.4.1.5205.2.35.1.18 | Nodees2410cDhcpSnooping | |||
| 1.3.6.1.4.1.5205.2.35.1.18.1 | Nodees2410cDhcpSnoopingConf | |||
| 1.3.6.1.4.1.5205.2.35.1.18.1.1 | Scalares2410cDhcpSnoopingState | read-write | current | Set DHCP Snooping State. 0 : Disable, 1 : Enable. When DHCP Relay is already running. Please disable DHCP Relay first, and then enable DHCP Snooping again. |
| 1.3.6.1.4.1.5205.2.35.1.18.1.2 | Tablees2410cDhcpSnoopingPortCountSetupTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.18.1.2.1 | Rowes2410cDhcpSnoopingPortCountSetupEntry | not-accessible | current | Entry(s) for DHCP snooping port count table. |
| 1.3.6.1.4.1.5205.2.35.1.18.1.2.1.1 | Columnes2410cDhcpSnoopingPortCountSetupPortIndex | not-accessible | current | The port index of DHCP snooping port count table. |
| 1.3.6.1.4.1.5205.2.35.1.18.1.2.1.2 | Columnes2410cDhcpSnoopingPortCountSetupCount | read-write | current | Set client-count. Limit range from 0 to 512. 0 for disable. |
| 1.3.6.1.4.1.5205.2.35.1.18.2 | Nodees2410cDhcpSnoopingTrustGroupConf | |||
| 1.3.6.1.4.1.5205.2.35.1.18.2.1 | Scalares2410cDhcpSnoopingTrustGroupNumbers | read-only | current | Numbers of DHCP snooping trust group |
| 1.3.6.1.4.1.5205.2.35.1.18.2.2 | Scalares2410cDhcpSnoopingTrustGroupCreatStatus | read-write | current | Creat a temp trust group in table. range : 1~4094 |
| 1.3.6.1.4.1.5205.2.35.1.18.2.3 | Tablees2410cDhcpSnoopingTrustGroupTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.18.2.3.1 | Rowes2410cDhcpSnoopingTrustGroupEntry | not-accessible | current | Entry(s) for DHCP snooping trust group table. |
| 1.3.6.1.4.1.5205.2.35.1.18.2.3.1.1 | Columnes2410cDhcpSnoopingTrustGroupIndex | not-accessible | current | The index of DHCP snooping trust group table. |
| 1.3.6.1.4.1.5205.2.35.1.18.2.3.1.2 | Columnes2410cDhcpSnoopingTrustGroupTrustVid | read-write | current | Trust Vid in turst group. range : 1~4094. |
| 1.3.6.1.4.1.5205.2.35.1.18.2.3.1.3 | Columnes2410cDhcpSnoopingTrustGroupOption82 | read-write | current | Option82 state in turst group. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.35.1.18.2.3.1.4 | Columnes2410cDhcpSnoopingTrustGroupAction | read-write | current | Action in turst group. 0 : Replace, 1 : Keep, 2 : Drop. |
| 1.3.6.1.4.1.5205.2.35.1.18.2.3.1.5 | Columnes2410cDhcpSnoopingTrustGroupServerPort | read-write | current | Trust port in turst group. Trust port with range format, max port 2 ports |
| 1.3.6.1.4.1.5205.2.35.1.18.2.3.1.6 | Columnes2410cDhcpSnoopingTrustGroupServerVid | read-write | current | Server Vid in turst group. range : 1~4094. |
| 1.3.6.1.4.1.5205.2.35.1.18.2.3.1.7 | Columnes2410cDhcpSnoopingTrustGroupServerIp | read-write | current | Server ip in turst group. |
| 1.3.6.1.4.1.5205.2.35.1.18.2.3.1.8 | Columnes2410cDhcpSnoopingTrustGroupRowStatus | read-write | current | The row status of trust group. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.5205.2.35.1.18.3 | Nodees2410cDhcpSnoopingDefaultGroupConf | |||
| 1.3.6.1.4.1.5205.2.35.1.18.3.1 | Scalares2410cDhcpSnoopingDefaultGroupServerPort | read-write | current | Server port in default turst group. Server port with range format, max port 2 ports, 0 for disabled |
| 1.3.6.1.4.1.5205.2.35.1.18.3.2 | Scalares2410cDhcpSnoopingDefaultGroupServerVid | read-write | current | Server Vid in default turst group. range : 1~4094. |
| 1.3.6.1.4.1.5205.2.35.1.18.3.3 | Scalares2410cDhcpSnoopingDefaultGroupOption82 | read-write | current | Option82 state in default turst group. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.35.1.18.3.4 | Scalares2410cDhcpSnoopingDefaultGroupAction | read-write | current | Action in turst group. 0 : Replace, 1 : Keep, 2 : Drop. |
| 1.3.6.1.4.1.5205.2.35.1.18.3.5 | Scalares2410cDhcpSnoopingDefaultGroupServerIp | read-write | current | Server ip in default turst group. |
| 1.3.6.1.4.1.5205.2.35.1.18.4 | Nodees2410cDhcpSnoopingLeaseList | |||
| 1.3.6.1.4.1.5205.2.35.1.18.4.1 | Scalares2410cDhcpSnoopingLeaseListDeleteAll | read-write | current | Delete all lease list. 0 : None, 1 : Delete All. |
| 1.3.6.1.4.1.5205.2.35.1.18.4.2 | Scalares2410cDhcpSnoopingLeaseListNumbers | read-only | current | Numbers of lease list. |
| 1.3.6.1.4.1.5205.2.35.1.18.4.3 | Tablees2410cDhcpSnoopingLeaseListTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.18.4.3.1 | Rowes2410cDhcpSnoopingLeaseListEntry | not-accessible | current | Entry(s) for DHCP snooping lease list table. |
| 1.3.6.1.4.1.5205.2.35.1.18.4.3.1.1 | Columnes2410cDhcpSnoopingLeaseListIndex | not-accessible | current | The index of DHCP snooping lease list table. |
| 1.3.6.1.4.1.5205.2.35.1.18.4.3.1.2 | Columnes2410cDhcpSnoopingLeaseListMac | read-only | current | The MAC of DHCP snooping lease list entry. |
| 1.3.6.1.4.1.5205.2.35.1.18.4.3.1.3 | Columnes2410cDhcpSnoopingLeaseListIp | read-only | current | The IP of DHCP snooping lease list entry. |
| 1.3.6.1.4.1.5205.2.35.1.18.4.3.1.4 | Columnes2410cDhcpSnoopingLeaseListPort | read-only | current | The port of DHCP snooping lease list entry. |
| 1.3.6.1.4.1.5205.2.35.1.18.4.3.1.5 | Columnes2410cDhcpSnoopingLeaseListVid | read-only | current | The vid of DHCP snooping lease list entry. |
| 1.3.6.1.4.1.5205.2.35.1.18.4.3.1.6 | Columnes2410cDhcpSnoopingLeaseListLease | read-only | current | The lease of DHCP snooping lease list entry. (Day:Hour:Min:Sec) |
| 1.3.6.1.4.1.5205.2.35.1.18.5 | Nodees2410cDhcpSnoopingCounter | |||
| 1.3.6.1.4.1.5205.2.35.1.18.5.1 | Scalares2410cDhcpSnoopingCounterReset | read-write | current | Reset dhcp snooptin port counter. 0 : None, 1 : reset. |
| 1.3.6.1.4.1.5205.2.35.1.18.5.2 | Tablees2410cDhcpSnoopingCounterTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.18.5.2.1 | Rowes2410cDhcpSnoopingCounterEntry | not-accessible | current | Entry(s) for DHCP snooping port counter table. |
| 1.3.6.1.4.1.5205.2.35.1.18.5.2.1.1 | Columnes2410cDhcpSnoopingCounterPortIndex | not-accessible | current | The port index of DHCP snooping port counter table. |
| 1.3.6.1.4.1.5205.2.35.1.18.5.2.1.2 | Columnes2410cDhcpSnoopingCounterDiscover | read-only | current | The discover of DHCP snooping port counter entry. |
| 1.3.6.1.4.1.5205.2.35.1.18.5.2.1.3 | Columnes2410cDhcpSnoopingCounterOffer | read-only | current | The offer of DHCP snooping port counter entry. |
| 1.3.6.1.4.1.5205.2.35.1.18.5.2.1.4 | Columnes2410cDhcpSnoopingCounterRequest | read-only | current | The request of DHCP snooping port counter entry. |
| 1.3.6.1.4.1.5205.2.35.1.18.5.2.1.5 | Columnes2410cDhcpSnoopingCounterDecline | read-only | current | The decline of DHCP snooping port counter entry. |
| 1.3.6.1.4.1.5205.2.35.1.18.5.2.1.6 | Columnes2410cDhcpSnoopingCounterAck | read-only | current | The ack of DHCP snooping port counter entry. |
| 1.3.6.1.4.1.5205.2.35.1.18.5.2.1.7 | Columnes2410cDhcpSnoopingCounterNack | read-only | current | The nack of DHCP snooping port counter entry. |
| 1.3.6.1.4.1.5205.2.35.1.18.5.2.1.8 | Columnes2410cDhcpSnoopingCounterRelease | read-only | current | The release of DHCP snooping port counter entry. |
| 1.3.6.1.4.1.5205.2.35.1.18.5.2.1.9 | Columnes2410cDhcpSnoopingCounterInform | read-only | current | The inform of DHCP snooping port counter entry. |
| 1.3.6.1.4.1.5205.2.35.1.19 | Nodees2410cDot1X | |||
| 1.3.6.1.4.1.5205.2.35.1.19.1 | Nodees2410cDot1XStateSetting | |||
| 1.3.6.1.4.1.5205.2.35.1.19.1.1 | Scalares2410cRadiusServer1 | read-write | current | Set radius server 1 ip |
| 1.3.6.1.4.1.5205.2.35.1.19.1.2 | Scalares2410cDot1XPort1 | read-write | current | Set 802.1X port number |
| 1.3.6.1.4.1.5205.2.35.1.19.1.3 | Scalares2410cRadiusServer2 | read-write | current | Set radius server 2 ip |
| 1.3.6.1.4.1.5205.2.35.1.19.1.4 | Scalares2410cDot1XPort2 | read-write | current | Set 802.1X port number |
| 1.3.6.1.4.1.5205.2.35.1.19.1.5 | Scalares2410cSecretKey1 | read-write | current | Set 802.1X secret key |
| 1.3.6.1.4.1.5205.2.35.1.19.1.6 | Scalares2410cAccountingService | read-write | current | Set 802.1X accounting service 0 : disable 1 : enable |
| 1.3.6.1.4.1.5205.2.35.1.19.1.7 | Scalares2410cAccountingServer1 | read-write | current | Set 802.1X accounting server 1 |
| 1.3.6.1.4.1.5205.2.35.1.19.1.8 | Scalares2410cAccountingPort1 | read-write | current | Set 802.1X accounting port number |
| 1.3.6.1.4.1.5205.2.35.1.19.1.9 | Scalares2410cAccountingServer2 | read-write | current | Set 802.1X accounting server 2 |
| 1.3.6.1.4.1.5205.2.35.1.19.1.10 | Scalares2410cAccountingPort2 | read-write | current | Set 802.1X accounting port number |
| 1.3.6.1.4.1.5205.2.35.1.19.1.11 | Scalares2410cSecretKey2 | read-write | current | Set 802.1X secret key |
| 1.3.6.1.4.1.5205.2.35.1.19.2 | Nodees2410cDot1XPortSecurityManagement | |||
| 1.3.6.1.4.1.5205.2.35.1.19.2.1 | Tablees2410cDot1XPortSecurityTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.19.2.1.1 | Rowes2410cDot1XPortSecurityEntry | not-accessible | current | Entry(s) for 802.1x port security management table. |
| 1.3.6.1.4.1.5205.2.35.1.19.2.1.1.1 | Columnes2410cDot1XPortSecurityPortIndex | not-accessible | current | The port index of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.35.1.19.2.1.1.2 | Columnes2410cDot1XPortSecurityMode | read-write | current | The mode of 802.1x port security. 0 : Disable, 1 : Normal, 2 : Advanced 802.1X |
| 1.3.6.1.4.1.5205.2.35.1.19.2.1.1.3 | Columnes2410cDot1XPortSecurityPortControl | read-write | current | The port control of 802.1x port security. 0 : ForceUnauthorized, 1 : ForceAuthorized, 2 : Auto |
| 1.3.6.1.4.1.5205.2.35.1.19.2.1.1.4 | Columnes2410cDot1XPortSecurityReAuthMax | read-write | current | The reAuthMax(1~10) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.35.1.19.2.1.1.5 | Columnes2410cDot1XPortSecurityTxPeriod | read-write | current | The txPeriod(1~65535) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.35.1.19.2.1.1.6 | Columnes2410cDot1XPortSecurityQuietPeriod | read-write | current | The quiet period(0~65535) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.35.1.19.2.1.1.7 | Columnes2410cDot1XPortSecurityReAuthEnabled | read-write | current | The reAuthEnabled of 802.1x port security. 0 : off, 1 : on. |
| 1.3.6.1.4.1.5205.2.35.1.19.2.1.1.8 | Columnes2410cDot1XPortSecurityReAuthPeriod | read-write | current | The reAuthPeriod(1~65535) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.35.1.19.2.1.1.9 | Columnes2410cDot1XPortSecurityMaxRequest | read-write | current | The max.request(1~10) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.35.1.19.2.1.1.10 | Columnes2410cDot1XPortSecuritySuppTimeout | read-write | current | The suppTimeout(1~255) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.35.1.19.2.1.1.11 | Columnes2410cDot1XPortSecurityServerTimeout | read-write | current | The server timeout(1~255) of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.35.1.19.2.1.1.12 | Columnes2410cDot1XPortSecurityStatus | read-only | current | The status of 802.1x port security. |
| 1.3.6.1.4.1.5205.2.35.1.20 | Nodees2410cTrapEntry | |||
| 1.3.6.1.4.1.5205.2.35.1.20.1 | Notificationes2410cModuleInserted | current | Send the trap when a module is inserted to the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.35.1.20.2 | Notificationes2410cModuleRemoved | current | Send the trap when a module is removed from the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.35.1.20.3 | Notificationes2410cDualMediaSwapped | current | Send the trap when the dual media port changed. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.35.1.20.4 | Notificationes2410cLoopDetected | current | Send the trap when loop condition has been detected. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.35.1.20.5 | Notificationes2410cIpMacBindOffered | current | Send the trap when a pair of IP-MAC binding is offered. | |
| 1.3.6.1.4.1.5205.2.35.1.20.6 | Notificationes2410cIpMacBindReleased | current | Send the trap when a pair of IP-MAC binding is released. | |
| 1.3.6.1.4.1.5205.2.35.1.20.7 | Notificationes2410cARPInspectionDetected | current | Send the trap when ARP inspection detected. | |
| 1.3.6.1.4.1.5205.2.35.1.20.100 | Notificationes2410cStpStateDisabled | current | Send the trap when the operational state of STP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.35.1.20.101 | Notificationes2410cStpStateEnabled | current | Send the trap when the operational state of STP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.35.1.20.102 | Notificationes2410cStpTopologyChanged | current | Send the trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces … | |
| 1.3.6.1.4.1.5205.2.35.1.20.110 | Notificationes2410cRmonRisingAlarm | current | Send the trap when an RMON rising alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that exceeds its own Risin… | |
| 1.3.6.1.4.1.5205.2.35.1.20.111 | Notificationes2410cRmonFallingAlarm | current | Send the trap when an RMON falling alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that is smaller than its … | |
| 1.3.6.1.4.1.5205.2.35.1.20.120 | Notificationes2410cLacpStateDisabled | current | Send the trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.35.1.20.121 | Notificationes2410cLacpStateEnabled | current | Send the trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.35.1.20.123 | Notificationes2410cLacpPortAdded | current | Send the trap when the state of port is in 'trunk ready'. | |
| 1.3.6.1.4.1.5205.2.35.1.20.124 | Notificationes2410cLacpPortTrunkFailure | current | Send the trap when one port is not able to be aggregated due to duplex-mode of the port. | |
| 1.3.6.1.4.1.5205.2.35.1.20.140 | Notificationes2410cGvrpStateDisabled | current | Send the trap when the operational state of GVRP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.35.1.20.141 | Notificationes2410cGvrpStateEnabled | current | Send the trap when the operational state of LACP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.35.1.20.151 | Notificationes2410cVlanPortBaseEnabled | current | Send the trap when the operational state of vlan is changed to port-based vlan. | |
| 1.3.6.1.4.1.5205.2.35.1.20.152 | Notificationes2410cVlanTagBaseEnabled | current | Send the trap when the operational state of vlan is changed to tag-based vlan. | |
| 1.3.6.1.4.1.5205.2.35.1.20.153 | Notificationes2410cVlanMetroBaseEnabled | current | Send the trap when the operational state of vlan is changed to metro-based vlan. | |
| 1.3.6.1.4.1.5205.2.35.1.20.200 | Notificationes2410cUserLogin | current | Send the trap when one user logins the system. | |
| 1.3.6.1.4.1.5205.2.35.1.20.201 | Notificationes2410cUserLogout | current | Send the trap when one user logouts the system. | |
| 1.3.6.1.4.1.5205.2.35.1.21 | Nodees2410cTrapVariable | |||
| 1.3.6.1.4.1.5205.2.35.1.21.1 | Scalarusername | read-only | current | System account name. |
| 1.3.6.1.4.1.5205.2.35.1.21.2 | ScalargroupId | read-only | current | The Trunk group ID of LACP. |
| 1.3.6.1.4.1.5205.2.35.1.21.3 | Scalaractorkey | read-only | current | This is the actor key information for LACP. |
| 1.3.6.1.4.1.5205.2.35.1.21.4 | Scalarpartnerkey | read-only | current | This is the partner key information for LACP. |
| 1.3.6.1.4.1.5205.2.35.1.21.5 | Scalaruplink | read-only | current | Uplink port(s) in the metro-mode vlan. |
| 1.3.6.1.4.1.5205.2.35.1.21.6 | Scalaripmacbind | read-only | current | IP-MAC Binding value. Format as mac:00:40:c7:00:00:01,ip:192.168.2.3,port:20 00:40:c7:00:00:01 is the mac address; 192.168.2.3 is the binding ip address; port:… |
| 1.3.6.1.4.1.5205.2.35.1.21.7 | Scalararpinspect | read-only | current | ARP Inspection detected. Format as mac:00:40:c7:00:00:01, port:20, Unknown Mac/IP. |
| 1.3.6.1.4.1.5205.2.35.1.22 | Nodees2410cAcl | |||
| 1.3.6.1.4.1.5205.2.35.1.22.1 | Nodees2410cHighAcl | |||
| 1.3.6.1.4.1.5205.2.35.1.22.1.1 | Scalares2410cHighAclCreatStatus | read-write | current | Create a new high-acl 0 : None, 1 : Create a high-acl temp entry |
| 1.3.6.1.4.1.5205.2.35.1.22.1.2 | Scalares2410cHighAclNumbers | read-only | current | Numbers of high-acl table. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3 | Tablees2410cHighAclTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1 | Rowes2410cHighAclEntry | not-accessible | current | Entry(s) for high-acl table. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.1 | Columnes2410cHighAclIndex | not-accessible | current | The entry index of high-acl table. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.2 | Columnes2410cHighAclName | read-write | current | The name of high-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.3 | Columnes2410cHighAclIngressPortMap | read-write | current | The ingress port map of high-acl entry. port range: syntax: 1,5-7, available from 1 to 10, 0 for any. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.4 | Columnes2410cHighAclSMacFilter | read-write | current | The source mac filter of high-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.5 | Columnes2410cHighAclDMacFilter | read-write | current | The destination mac filter of high-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.6 | Columnes2410cHighAclVlanType | read-write | current | The vlan type of high-acl entry. 0 : Any, 1 : Tag-Based Vlan. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.7 | Columnes2410cHighAclTagVid | read-write | current | The tag-based vlan vid of high-acl entry. VLAN ID, form 1 to 4094, 0 for priority tag. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.8 | Columnes2410cHighAclTagPriority | read-write | current | The tag priority(0~7) of high-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.9 | Columnes2410cHighAclEthernetType | read-write | current | The ethernet type of high-acl entry. Ethernet type, format: 0806 (in hexadecimal format). Example: IPv4 for 0800, ARP for 0806, Any for 0000. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.10 | Columnes2410cHighAclIPv4Protocol | read-write | current | The IPv4 protocol of high-acl entry. IPv4 protocol, from 0 to 255. Example: ICMP for 1, UDP for 17, TCP for 6. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.11 | Columnes2410cHighAclIPv4ToS | read-write | current | The IPv4 ToS of high-acl entry. IPv4 TOS field, from 00 to ff (in hexadecimal format). |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.12 | Columnes2410cHighAclIPv4TTLRange | read-write | current | The IPv4 TTL Range of high-acl entry. 0 : 0, 1 : 1, 2 : 2~254, 3 : 255. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.13 | Columnes2410cHighAclIPv4DA | read-write | current | The IPv4 destination Address value of high-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.14 | Columnes2410cHighAclIPv4DAMask | read-write | current | The IPv4 destination Address mask value of high-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.15 | Columnes2410cHighAclIPv4SA | read-write | current | The IPv4 Source Address value of high-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.16 | Columnes2410cHighAclIPv4SAMask | read-write | current | The IPv4 Source Address mask value of high-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.17 | Columnes2410cHighAclL4DestinationPort | read-write | current | The L4 destination port number of high-acl entry. port: IPv4 L4 destination port, from 0 to 65535 |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.18 | Columnes2410cHighAclL4SourcePort | read-write | current | The L4 source port number of high-acl entry. port: IPv4 L4 source port, from 0 to 65535 |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.19 | Columnes2410cHighAclActionIBForwardDecision | read-write | current | The forward decision in in-Band. 0 : No change, 1 : Use new forward map, 2 : ORed with new map, 3 : Explicit actions |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.20 | Columnes2410cHighAclActionIBForwardMap | read-write | current | If es2410cHighAclActionIBForwardDecision as 0 then 0 : As ARL map. If es2410cHighAclActionIBForwardDecision as 1 or 2 then 0 : All Linked-Port, 1~10 : Port 1 ~… |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.21 | Columnes2410cHighAclActionIBModifyDSCPPacket | read-write | current | Modify DSCP packet value in in-Band. 0 : Any, 1 : Specific. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.22 | Columnes2410cHighAclActionIBModifyDSCPValue | read-write | current | Be used by es2410cHighAclActionIBModifyDSCPPacket as 1. New DSCP field value, from 0 to 63 |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.23 | Columnes2410cHighAclActionOBForwardDecision | read-write | current | The forward decision in out-Band. 0 : No change, 1 : Use new forward map, 2 : ORed with new map, 3 : Explicit actions |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.24 | Columnes2410cHighAclActionOBForwardMap | read-write | current | If es2410cHighAclActionOBForwardDecision as 0 0 : As ARL map. If es2410cHighAclActionOBForwardDecision as 1 or 2 then 0 : All Linked-Port, 1~10 : Port 1 ~ Port… |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.25 | Columnes2410cHighAclActionOBModifyDSCPPacket | read-write | current | Modify DSCP packet value in out-Band. 0 : Any, 1 : Specific. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.26 | Columnes2410cHighAclActionOBModifyDSCPValue | read-write | current | Be used by es2410cHighAclActionOBModifyDSCPPacket as 1. New DSCP field value, from 0 to 63 |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.27 | Columnes2410cHighAclActionModifyDot1PPacket | read-write | current | Modify 802.1P packet value. 0 : Any, 1 : Specific. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.28 | Columnes2410cHighAclActionModifyDot1PValue | read-write | current | Be used by es2410cHighAclActionModifyDot1PPacket as 1. New 802.1P field value, from 0 to 7 |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.29 | Columnes2410cHighAclActionModifyQoSPacket | read-write | current | Modify QoS packet value. 0 : Any, 1 : Specific. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.30 | Columnes2410cHighAclActionModifyQoSValue | read-write | current | Be used by es2410cHighAclActionModifyQoSPacket as 1. New QoS field value, from 0 to 3 |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.31 | Columnes2410cHighAclRateMeter | read-write | current | The rate meter(64..1024000) of high-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.1.3.1.32 | Columnes2410cHighAclRowStatus | read-write | current | The row status of high-acl entry. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.5205.2.35.1.22.2 | Nodees2410cLowAcl | |||
| 1.3.6.1.4.1.5205.2.35.1.22.2.1 | Scalares2410cLowAclCreatStatus | read-write | current | Create a new low-acl 0 : None, 1 : Create a low-acl temp entry |
| 1.3.6.1.4.1.5205.2.35.1.22.2.2 | Scalares2410cLowAclNumbers | read-only | current | Numbers of low-acl table. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3 | Tablees2410cLowAclTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1 | Rowes2410cLowAclEntry | not-accessible | current | Entry(s) for Low-acl table. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.1 | Columnes2410cLowAclIndex | not-accessible | current | The entry index of Low-acl table. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.2 | Columnes2410cLowAclName | read-write | current | The name of low-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.3 | Columnes2410cLowAclIngressPortMap | read-write | current | The ingress port map of Low-acl entry. port range: syntax: 1,5-7, available from 1 to 10, 0 for any. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.4 | Columnes2410cLowAclSMacFilter | read-write | current | The source mac filter of low-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.5 | Columnes2410cLowAclDMacFilter | read-write | current | The destination mac filter of low-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.6 | Columnes2410cLowAclVlanType | read-write | current | The vlan type of low-acl entry. 0 : Any, 1 : Tag-Based Vlan. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.7 | Columnes2410cLowAclTagVid | read-write | current | The tag-based vlan vid of low-acl entry. VLAN ID, form 1 to 4094, 0 for priority tag. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.8 | Columnes2410cLowAclTagPriority | read-write | current | The tag priority(0~7) of low-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.9 | Columnes2410cLowAclEthernetType | read-write | current | The ethernet type of low-acl entry. Ethernet type, format: 0806 (in hexadecimal format). Example: IPv4 for 0800, ARP for 0806, Any for 0000. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.10 | Columnes2410cLowAclIPv4Protocol | read-write | current | The IPv4 protocol of low-acl entry. IPv4 protocol, from 0 to 255. Example: ICMP for 1, UDP for 17, TCP for 6. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.11 | Columnes2410cLowAclIPv4ToS | read-write | current | The IPv4 ToS of low-acl entry. IPv4 TOS field, from 00 to ff (in hexadecimal format). |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.12 | Columnes2410cLowAclIPv4TTLRange | read-write | current | The IPv4 TTL Range of low-acl entry. 0 : 0, 1 : 1, 2 : 2~254, 3 : 255. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.13 | Columnes2410cLowAclIPv4DA | read-write | current | The IPv4 destination Address value of low-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.14 | Columnes2410cLowAclIPv4DAMask | read-write | current | The IPv4 destination Address mask value of low-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.15 | Columnes2410cLowAclIPv4SA | read-write | current | The IPv4 Source Address value of low-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.16 | Columnes2410cLowAclIPv4SAMask | read-write | current | The IPv4 Source Address mask value of low-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.17 | Columnes2410cLowAclL4DestinationPort | read-write | current | The L4 destination port number of low-acl entry. IPv4 L4 destination port, from 0 to 65535 |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.18 | Columnes2410cLowAclL4SourcePort | read-write | current | The L4 source port number of low-acl entry. IPv4 L4 source port, from 0 to 65535 |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.19 | Columnes2410cLowAclActionIBForwardDecision | read-write | current | The forward decision in in-Band. 0 : No change, 1 : Use new forward map, 2 : ORed with new map, 3 : Explicit actions |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.20 | Columnes2410cLowAclActionIBForwardMap | read-write | current | If es2410cLowAclActionIBForwardDecision as 0 then 0 : As ARL map. If es2410cLowAclActionIBForwardDecision as 1 or 2 then 0 : All Linked-Port, 1~10 : Port 1 ~ P… |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.21 | Columnes2410cLowAclActionIBModifyDSCPPacket | read-write | current | Modify DSCP packet value in in-Band. 0 : Any, 1 : Specific. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.22 | Columnes2410cLowAclActionIBModifyDSCPValue | read-write | current | Be used by es2410cLowAclActionIBModifyDSCPPacket as 1. New DSCP field value, from 0 to 63 |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.23 | Columnes2410cLowAclActionOBForwardDecision | read-write | current | The forward decision in out-Band. 0 : No change, 1 : Use new forward map, 2 : ORed with new map, 3 : Explicit actions |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.24 | Columnes2410cLowAclActionOBForwardMap | read-write | current | If es2410cLowAclActionOBForwardDecision as 0 0 : As ARL map. If es2410cLowAclActionOBForwardDecision as 1 or 2 then 0 : All Linked-Port, 1~10 : Port 1 ~ Port 1… |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.25 | Columnes2410cLowAclActionOBModifyDSCPPacket | read-write | current | Modify DSCP packet value in out-Band. 0 : Any, 1 : Specific. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.26 | Columnes2410cLowAclActionOBModifyDSCPValue | read-write | current | Be used by es2410cLowAclActionOBModifyDSCPPacket as 1. New DSCP field value, from 0 to 63 |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.27 | Columnes2410cLowAclActionModifyDot1PPacket | read-write | current | Modify 802.1P packet value. 0 : Any, 1 : Specific. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.28 | Columnes2410cLowAclActionModifyDot1PValue | read-write | current | Be used by es2410cLowAclActionModifyDot1PPacket as 1. New 802.1p field value, from 0 to 7 |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.29 | Columnes2410cLowAclActionModifyQoSPacket | read-write | current | Modify QoS packet value. 0 : Any, 1 : Specific. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.30 | Columnes2410cLowAclActionModifyQoSValue | read-write | current | Be used by es2410cLowAclActionModifyQoSPacket as 1. New QoS field value, from 0 to 3 |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.31 | Columnes2410cLowAclRateMeter | read-write | current | The rate meter(64..1024000) of low-acl entry. |
| 1.3.6.1.4.1.5205.2.35.1.22.2.3.1.32 | Columnes2410cLowAclRowStatus | read-write | current | The row status of low-acl entry. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.5205.2.35.1.23 | Nodees2410cTrunkInfo | |||
| 1.3.6.1.4.1.5205.2.35.1.23.1 | Nodees2410cTrunkPort | |||
| 1.3.6.1.4.1.5205.2.35.1.23.1.1 | Tablees2410cTrunkPortTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.23.1.1.1 | Rowes2410cTrunkPortEntry | not-accessible | current | Entry(s) for trunk table. |
| 1.3.6.1.4.1.5205.2.35.1.23.1.1.1.1 | Columnes2410cTrunkPortIndex | not-accessible | current | The port index of trunk table. |
| 1.3.6.1.4.1.5205.2.35.1.23.1.1.1.2 | Columnes2410cTrunkPortMethod | read-write | current | The method of trunk port. 0 : None, 1 : LACP, 2 : Static. |
| 1.3.6.1.4.1.5205.2.35.1.23.1.1.1.3 | Columnes2410cTrunkPortGroup | read-write | current | The group(0~4) of trunk port. |
| 1.3.6.1.4.1.5205.2.35.1.23.1.1.1.4 | Columnes2410cTrunkPortActiveLacp | read-write | current | The active lacp mode of trunk port. 0 : Passive, 1 : Active. |
| 1.3.6.1.4.1.5205.2.35.1.23.1.1.1.5 | Columnes2410cTrunkPortAggtr | read-only | current | The Aggtr of trunk port. |
| 1.3.6.1.4.1.5205.2.35.1.23.1.1.1.6 | Columnes2410cTrunkPortStatus | read-only | current | The status of trunk port. 0 : None, 1 : Ready. |
| 1.3.6.1.4.1.5205.2.35.1.23.1.1.1.7 | Columnes2410cTrunkPortCurrentMode | read-write | current | The current mode of trunk port entry. 0 : Active mode, 1 : Edit mode, 2 : Do edit. |
| 1.3.6.1.4.1.5205.2.35.1.23.2 | Nodees2410cAggregatorView | |||
| 1.3.6.1.4.1.5205.2.35.1.23.2.1 | Tablees2410cAggregatorViewTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.23.2.1.1 | Rowes2410cAggregatorViewEntry | not-accessible | current | Entry(s) for aggregator view table. |
| 1.3.6.1.4.1.5205.2.35.1.23.2.1.1.1 | Columnes2410cAggregatorViewIndex | not-accessible | current | The port index of aggregator view table. |
| 1.3.6.1.4.1.5205.2.35.1.23.2.1.1.2 | Columnes2410cAggregatorViewMethod | read-only | current | The method of aggregator view table. 0 : None, 1 : LACP, 2 : Static. |
| 1.3.6.1.4.1.5205.2.35.1.23.2.1.1.3 | Columnes2410cAggregatorViewMemberPorts | read-only | current | The member ports of aggregator view table. |
| 1.3.6.1.4.1.5205.2.35.1.23.2.1.1.4 | Columnes2410cAggregatorViewReadyPorts | read-only | current | The ready ports of aggregator view table. |
| 1.3.6.1.4.1.5205.2.35.1.23.3 | Nodees2410cLacpSystemConfiguration | |||
| 1.3.6.1.4.1.5205.2.35.1.23.3.1 | Scalares2410cLacpSystemPriority | read-write | current | The priority of LACP system. |
| 1.3.6.1.4.1.5205.2.35.1.23.3.2 | Scalares2410cLacpSystemHashMethod | read-write | current | The hash method of LACP system. 0 : DA and SA 1 : SA 2 : DA 3 : IPv4 DIP 4 : IPv4 SIP 5 : DA, SA, IPv4 DIP and IPv4 SIP |
| 1.3.6.1.4.1.5205.2.35.1.25 | Nodees2410cDhcprelay | |||
| 1.3.6.1.4.1.5205.2.35.1.25.1 | Scalares2410cDhcpRelayState | read-write | current | Set DHCP Relay State. 0 : Disable, 1 : Enable. When DHCP or DHCP Snooping is already running. Please disable DHCP or DHCP Snooping first, and then enable DHCP … |
| 1.3.6.1.4.1.5205.2.35.1.25.2 | Scalares2410cDhcpRelayLifeTime | read-write | current | Set wait Server reply time. time: from 1 to 10 second(s) |
| 1.3.6.1.4.1.5205.2.35.1.25.3 | Scalares2410cDhcpRelayOption82 | read-write | current | Option82 state in Dhcp Relay. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.35.1.25.4 | Scalares2410cDhcpRelayOption82Action | read-write | current | The action of the switch which is existing relay information in packets received from DHCP clients. 0 : Replace, 1 : Keep, 2 : Drop. |
| 1.3.6.1.4.1.5205.2.35.1.25.5 | Scalares2410cDhcpRelayServerPort | read-write | current | The Dhcp Relay Server Port. Server port cannot exceed more than two ports. |
| 1.3.6.1.4.1.5205.2.35.1.25.6 | Scalares2410cDhcpRelayServerIP | read-write | current | Server ip |
| 1.3.6.1.4.1.5205.2.35.1.26 | Nodees2410cMulticast | |||
| 1.3.6.1.4.1.5205.2.35.1.26.1 | Nodees2410cIgmpSetting | |||
| 1.3.6.1.4.1.5205.2.35.1.26.1.1 | Scalares2410cIgmpSnoopingState | read-write | current | Set IGMP Snooping State. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.35.1.26.1.2 | Scalares2410cIgmpSnoopingUnregisterMulticastFlooding | read-write | current | Set Unregister Multicast Flooding State. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.35.1.26.1.3 | Scalares2410cIgmpSnoopingGeneralQueryInterval | read-write | current | Set general query interval. interval: from 1 to 2000 second(s) |
| 1.3.6.1.4.1.5205.2.35.1.26.1.4 | Scalares2410cIgmpSnoopingGeneralQueryMaxResponseTime | read-write | current | Set general query max response time. time: from 1 to 10 second(s) |
| 1.3.6.1.4.1.5205.2.35.1.26.1.5 | Scalares2410cIgmpSnoopingGeneralQueryTimeout | read-write | current | Set general query timeout. timeout: from 1 to 30 second(s) |
| 1.3.6.1.4.1.5205.2.35.1.26.1.6 | Scalares2410cIgmpSnoopingSpecificQueryCount | read-write | current | Set specific query count. count: from 1 to 10 |
| 1.3.6.1.4.1.5205.2.35.1.26.1.7 | Scalares2410cIgmpSnoopingSpecificQueryMaxResponseTime | read-write | current | Set specific query max response time. time: from 1 to 10 second(s) |
| 1.3.6.1.4.1.5205.2.35.1.26.1.8 | Scalares2410cIgmpSnoopingSpecificQueryTimeout | read-write | current | Set specific query timeout. timeout: from 1 to 30 second(s) |
| 1.3.6.1.4.1.5205.2.35.1.26.1.9 | Tablees2410cIgmpSnoopingSettingTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.26.1.9.1 | Rowes2410cIgmpSnoopingSettingEntry | not-accessible | current | Entry(s) for IGMP snooping port setting table. |
| 1.3.6.1.4.1.5205.2.35.1.26.1.9.1.1 | Columnes2410cIgmpSnoopingSettingPortIndex | not-accessible | current | The port index of IGMP snooping port setting table. |
| 1.3.6.1.4.1.5205.2.35.1.26.1.9.1.2 | Columnes2410cIgmpSnoopingSettingMulticastGroupLimit | read-write | current | Set multicast group limit. Limit range from 0 to 256. |
| 1.3.6.1.4.1.5205.2.35.1.26.1.9.1.3 | Columnes2410cIgmpSnoopingSettingIGMPRouter | read-write | current | Set IGMP router. 0 : non-router, 1 : router. |
| 1.3.6.1.4.1.5205.2.35.1.26.2 | Nodees2410cIgmpVlan | |||
| 1.3.6.1.4.1.5205.2.35.1.26.2.1 | Scalares2410cIgmpVlanNumbers | read-only | current | Total numbers for igmp vlan. |
| 1.3.6.1.4.1.5205.2.35.1.26.2.2 | Scalares2410cIgmpVlanCreatStatus | read-write | current | Create IGMP Vlan Vid. Vid: from 1 to 4094 |
| 1.3.6.1.4.1.5205.2.35.1.26.2.3 | Tablees2410cIgmpVlanTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.26.2.3.1 | Rowes2410cIgmpVlanEntry | not-accessible | current | Entry(s) for Igmp Vlan table. |
| 1.3.6.1.4.1.5205.2.35.1.26.2.3.1.1 | Columnes2410cIgmpVlanIndex | not-accessible | current | The entry index of Igmp Vlan table. |
| 1.3.6.1.4.1.5205.2.35.1.26.2.3.1.2 | Columnes2410cIgmpVlanVid | read-only | current | The vid of igmp vlan entry. |
| 1.3.6.1.4.1.5205.2.35.1.26.2.3.1.3 | Columnes2410cIgmpVlanRowStatus | read-write | current | The row status of igmp vlan entry. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.5205.2.35.1.26.3 | Nodees2410cIgmpVlanGroupAllow | |||
| 1.3.6.1.4.1.5205.2.35.1.26.3.1 | Scalares2410cIgmpVlanGroupAllowCreatStatus | read-write | current | Create IGMP Group Allow Entry. |
| 1.3.6.1.4.1.5205.2.35.1.26.3.2 | Tablees2410cIgmpVlanGroupAllowTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.26.3.2.1 | Rowes2410cIgmpVlanGroupAllowEntry | not-accessible | current | Entry(s) for Igmp Group Allow table. |
| 1.3.6.1.4.1.5205.2.35.1.26.3.2.1.1 | Columnes2410cIgmpVlanGroupAllowIndex | not-accessible | current | The entry index of Igmp Group Allow table. |
| 1.3.6.1.4.1.5205.2.35.1.26.3.2.1.2 | Columnes2410cIgmpVlanGroupAllowStartAddress | read-write | current | Start address of Group Allow entry. |
| 1.3.6.1.4.1.5205.2.35.1.26.3.2.1.3 | Columnes2410cIgmpVlanGroupAllowEndAddress | read-write | current | End address of Group Allow entry. |
| 1.3.6.1.4.1.5205.2.35.1.26.3.2.1.4 | Columnes2410cIgmpVlanGroupAllowVid | read-write | current | VLAN ID of Group Allow entry. |
| 1.3.6.1.4.1.5205.2.35.1.26.3.2.1.5 | Columnes2410cIgmpVlanGroupAllowPortMember | read-write | current | Port Member of Group Allow entry. |
| 1.3.6.1.4.1.5205.2.35.1.26.3.2.1.6 | Columnes2410cIgmpVlanGroupAllowRowStatus | read-write | current | The row status of igmp group allow entry. 1 : active, 2 : not-inService, 3 : delete |
| 1.3.6.1.4.1.5205.2.35.1.26.4 | Nodees2410cMvrSetting | |||
| 1.3.6.1.4.1.5205.2.35.1.26.4.1 | Scalares2410cMvrSettingMulticastVlanRegistration | read-write | current | Set MVR State. 0 : Disable, 1 : Enable. |
| 1.3.6.1.4.1.5205.2.35.1.26.4.2 | Scalares2410cMvrSettingMulticastVlanIdConf | read-write | current | Get/Set multicast vlan vid. This value whill be kept in buffer. Will be activity after enable Multicast Vlan Registration. vid: from 2 to 4094, 1: reserved for… |
| 1.3.6.1.4.1.5205.2.35.1.26.4.3 | Scalares2410cMvrSettingMulticastVlanIdShow | read-only | current | Get the multicast vlan vid real value. vid: from 2 to 4094 |
| 1.3.6.1.4.1.5205.2.35.1.26.4.4 | Tablees2410cMvrSettingTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.26.4.4.1 | Rowes2410cMvrSettingEntry | not-accessible | current | Entry(s) for MVR port setting table. |
| 1.3.6.1.4.1.5205.2.35.1.26.4.4.1.1 | Columnes2410cMvrSettingPort | not-accessible | current | The port index of MVR port setting table. |
| 1.3.6.1.4.1.5205.2.35.1.26.4.4.1.2 | Columnes2410cMvrSettingServerType | read-write | current | Set mvr service type. type: 0(None), 1(Client), 2(Router).At least one clent or router port. |
| 1.3.6.1.4.1.5205.2.35.1.26.4.4.1.3 | Columnes2410cMvrSettingTagging | read-write | current | Set mvr tagging. 0 : untag-out, 1 : tag-out. |
| 1.3.6.1.4.1.5205.2.35.1.26.5 | Nodees2410cMulticastStatus | |||
| 1.3.6.1.4.1.5205.2.35.1.26.5.1 | Tablees2410cMulticastStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.5205.2.35.1.26.5.1.1 | Rowes2410cMulticastStatusEntry | not-accessible | current | Entry(s) for Multicast Status table. |
| 1.3.6.1.4.1.5205.2.35.1.26.5.1.1.1 | Columnes2410cMulticastStatusIndex | read-only | current | The port index of trunk table. |
| 1.3.6.1.4.1.5205.2.35.1.26.5.1.1.2 | Columnes2410cMulticastStatusVid | read-only | current | The Vid of multicast status table. |
| 1.3.6.1.4.1.5205.2.35.1.26.5.1.1.3 | Columnes2410cMulticastStatusMulticastGroup | read-only | current | The Multicast Group of multicast status table. |
| 1.3.6.1.4.1.5205.2.35.1.26.5.1.1.4 | Columnes2410cMulticastStatusPortMember | read-only | current | The Port Member of multicast status table. |
| 1.3.6.1.4.1.5205.2.35.1.26.6 | Nodees2410cRadiusIgmpSetting | |||
| 1.3.6.1.4.1.5205.2.35.1.26.6.1 | Scalares2410cRadiusIgmpServer1 | read-write | current | Radius Igmp Server1 |
| 1.3.6.1.4.1.5205.2.35.1.26.6.2 | Scalares2410cRadiusIgmpPortNumber1 | read-write | current | Set Radius Igmp port number1. port number: from 1 to 65535 |
| 1.3.6.1.4.1.5205.2.35.1.26.6.3 | Scalares2410cRadiusIgmpServer2 | read-write | current | Radius Igmp Server2 |
| 1.3.6.1.4.1.5205.2.35.1.26.6.4 | Scalares2410cRadiusIgmpPortNumber2 | read-write | current | Set Radius Igmp port number2. port number: from 1 to 65535 |
| 1.3.6.1.4.1.5205.2.35.1.26.6.5 | Scalares2410cRadiusIgmpSecretKey1 | read-write | current | Set Radius Igmp secret key1 |
| 1.3.6.1.4.1.5205.2.35.1.26.6.6 | Scalares2410cRadiusIgmpAccountingServer1 | read-write | current | Radius Igmp Accounting Server1 |
| 1.3.6.1.4.1.5205.2.35.1.26.6.7 | Scalares2410cRadiusIgmpAccountingPortNumber1 | read-write | current | Set Radius Igmp Accounting port number1. port number: from 1 to 65535 |
| 1.3.6.1.4.1.5205.2.35.1.26.6.8 | Scalares2410cRadiusIgmpAccountingServer2 | read-write | current | Radius Igmp Accounting Server2 |
| 1.3.6.1.4.1.5205.2.35.1.26.6.9 | Scalares2410cRadiusIgmpAccountingPortNumber2 | read-write | current | Set Radius Igmp Accounting port number2. port number: from 1 to 65535 |
| 1.3.6.1.4.1.5205.2.35.1.26.6.10 | Scalares2410cRadiusIgmpSecretKey2 | read-write | current | Set Radius Igmp secret key2 |
| 1.3.6.1.4.1.5205.2.35.1.26.6.11 | Scalares2410cRadiusIgmpResponseTimeout | read-write | current | Set radius-igmp timeout. time: 2 ~ 60 seconds |
| 1.3.6.1.4.1.5205.2.35.1.26.6.12 | Scalares2410cRadiusIgmpNumberOfRetry | read-write | current | Set radius-igmp number of retry. value: 0 ~ 10 times |
| 1.3.6.1.4.1.5205.2.35.1.26.6.13 | Scalares2410cRadiusIgmpPortMember | read-write | current | The Port Member of Radius Igmp. 0: no port member |