RUBYTECH-FGS2924R-MIB
704 objects
The MIB module is for Ruby Tech.
Imported Objects
| BRIDGE-MIB | MacAddress |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5205 | Identityrubytech | The MIB module is for Ruby Tech. | ||
| 1.3.6.1.4.1.5205.2 | Nodeswitch | |||
| 1.3.6.1.4.1.5205.2.34 | Nodefgs2924rProductID | |||
| 1.3.6.1.4.1.5205.2.34.1 | Nodefgs2924rProduces | |||
| 1.3.6.1.4.1.5205.2.34.1.1 | Nodefgs2924rSystem | |||
| 1.3.6.1.4.1.5205.2.34.1.1.1 | Nodefgs2924rCommonSys | |||
| 1.3.6.1.4.1.5205.2.34.1.1.1.1 | Scalarfgs2924rReboot | read-write | current | Reboot the system. Get this OID always return zero. 0 - do nothing 1 - Reboot without saving start |
| 1.3.6.1.4.1.5205.2.34.1.1.1.2 | Scalarfgs2924rBiosVsersion | read-only | current | Get the BIOS version of the system. |
| 1.3.6.1.4.1.5205.2.34.1.1.1.3 | Scalarfgs2924rFirmwareVersion | read-only | current | Get the firmware version of the system. |
| 1.3.6.1.4.1.5205.2.34.1.1.1.4 | Scalarfgs2924rHardwareVersion | read-only | current | Get the hardware version of the system. |
| 1.3.6.1.4.1.5205.2.34.1.1.1.5 | Scalarfgs2924rMechanicalVersion | read-only | current | Get the mechanical version of the system. |
| 1.3.6.1.4.1.5205.2.34.1.1.1.6 | Scalarfgs2924rSerialNumber | read-only | current | Get the Serial number of the system. |
| 1.3.6.1.4.1.5205.2.34.1.1.1.7 | Scalarfgs2924rHostMacAddress | read-only | current | Get the MAC address of the system. |
| 1.3.6.1.4.1.5205.2.34.1.1.1.8 | Scalarfgs2924rDevicePort | read-only | current | Get the quantity of ports that this system owns now. |
| 1.3.6.1.4.1.5205.2.34.1.1.1.9 | Scalarfgs2924rRamSize | read-only | current | Get the RAM size of the system. |
| 1.3.6.1.4.1.5205.2.34.1.1.1.10 | Scalarfgs2924rFlashSize | read-only | current | Get the flash size of the system. |
| 1.3.6.1.4.1.5205.2.34.1.1.1.11 | Scalarfgs2924rDeviceName | read-write | current | Get/Set the device name of the system. |
| 1.3.6.1.4.1.5205.2.34.1.1.1.12 | Scalarfgs2924rSystemDescription | read-only | current | Get the system desctiption of the system. |
| 1.3.6.1.4.1.5205.2.34.1.1.1.13 | Scalarfgs2924rCpuLoad | read-only | current | Get the CPU Load. |
| 1.3.6.1.4.1.5205.2.34.1.1.2 | Nodefgs2924rIP | |||
| 1.3.6.1.4.1.5205.2.34.1.1.2.1 | Scalarfgs2924rDhcpSetting | read-write | current | Get/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enable |
| 1.3.6.1.4.1.5205.2.34.1.1.2.2 | Scalarfgs2924rIPAddress | read-write | current | Get/Set the IP address of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.34.1.1.2.3 | Scalarfgs2924rNetMask | read-write | current | Get/Set the subnet mask of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.34.1.1.2.4 | Scalarfgs2924rDefaultGateway | read-write | current | Get/Set the default gateway of the system. You can't set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.34.1.1.2.5 | Scalarfgs2924rDnsConf | read-write | current | Get/Set DNS state. Change of this value will be kept in buffer and only take effect while DHCP is enabled. 0 - manual, the DNS server is from manual setting 1 … |
| 1.3.6.1.4.1.5205.2.34.1.1.2.6 | Scalarfgs2924rDnsState | read-only | current | Get the DNS real state. 0 - manual, the DNS server is from manual setting 1 - auto, the DNS server is assigned by DHCP server. |
| 1.3.6.1.4.1.5205.2.34.1.1.2.7 | Scalarfgs2924rDnsServer | read-write | current | Get/Set the DNS server of the system. |
| 1.3.6.1.4.1.5205.2.34.1.1.3 | Nodefgs2924rTime | |||
| 1.3.6.1.4.1.5205.2.34.1.1.3.1 | Scalarfgs2924rSystemCurrentTime | read-only | current | Get the current time of the system. |
| 1.3.6.1.4.1.5205.2.34.1.1.3.2 | Scalarfgs2924rManualTimeSetting | read-write | current | Get/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25 . The value ran… |
| 1.3.6.1.4.1.5205.2.34.1.1.3.3 | Scalarfgs2924rNTPServer | read-write | current | Get/Set the NTP Time Server. You can use the IP address or domain name. |
| 1.3.6.1.4.1.5205.2.34.1.1.3.4 | Scalarfgs2924rNTPTimeZone | read-write | current | Get/Set the NTP Time Zone. The value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - G… |
| 1.3.6.1.4.1.5205.2.34.1.1.3.5 | Scalarfgs2924rNTPTimeSync | read-write | current | Sync time from NTP Server. Get this OID always return zero. Set the Time Server and Time Zone before doing time sync. Notice that time server must be correct! … |
| 1.3.6.1.4.1.5205.2.34.1.1.3.6 | Scalarfgs2924rDaylightSavingTime | read-write | current | Get/Set the daylight saving time. The value range is between -5 and 5. (Unit: hour) |
| 1.3.6.1.4.1.5205.2.34.1.1.3.7 | Scalarfgs2924rDaylightStartTime | read-write | current | Get/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 10/01… |
| 1.3.6.1.4.1.5205.2.34.1.1.3.8 | Scalarfgs2924rDaylightEndTime | read-write | current | Get/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 04/01/0… |
| 1.3.6.1.4.1.5205.2.34.1.1.4 | Nodefgs2924rAccount | |||
| 1.3.6.1.4.1.5205.2.34.1.1.4.1 | Scalarfgs2924rAccountNumber | read-only | current | Get the current account number(s) of the system. |
| 1.3.6.1.4.1.5205.2.34.1.1.4.2 | Tablefgs2924rAccountTable | not-accessible | current | This is a list of FGS2924RAccountEntry. The numbers of entries are given by the value of fgs2924rAccountNumber. |
| 1.3.6.1.4.1.5205.2.34.1.1.4.2.1 | Rowfgs2924rAccountEntry | not-accessible | current | This is the Entry(s) for account information. |
| 1.3.6.1.4.1.5205.2.34.1.1.4.2.1.1 | Columnfgs2924rAccountIndex | read-only | current | This is the index of the account entry. |
| 1.3.6.1.4.1.5205.2.34.1.1.4.2.1.2 | Columnfgs2924rAccountAuthorization | read-only | current | This is the authorization of the account entry. |
| 1.3.6.1.4.1.5205.2.34.1.1.4.2.1.3 | Columnfgs2924rAccountName | read-write | current | This is the username of the account entry. |
| 1.3.6.1.4.1.5205.2.34.1.1.4.2.1.4 | Columnfgs2924rAccountPassword | read-write | current | This is the password of the account entry. The return value is always '********'. |
| 1.3.6.1.4.1.5205.2.34.1.1.4.3 | Scalarfgs2924rAccountAddAuthorization | read-write | current | Specify the limits of authority when add an account. 0:guest, 1:operator. |
| 1.3.6.1.4.1.5205.2.34.1.1.4.4 | Scalarfgs2924rAccountAddName | read-write | current | This is the account name for adding operation. |
| 1.3.6.1.4.1.5205.2.34.1.1.4.5 | Scalarfgs2924rAccountAddPassword | read-write | current | This is the account password for adding operation. The return value is always '********'. |
| 1.3.6.1.4.1.5205.2.34.1.1.4.6 | Scalarfgs2924rDoAccountAdd | read-write | current | Add account name. OID fgs2924rAccountAddName and fgs2924rAccountAddPassword must be filled first. Get this OID always return zero. 1 - add account. 0 - do noth… |
| 1.3.6.1.4.1.5205.2.34.1.1.4.7 | Scalarfgs2924rAccountDel | read-write | current | Delete account. The value is valid fgs2924rAccountIndex(Can't delete administrator). |
| 1.3.6.1.4.1.5205.2.34.1.1.5 | Nodefgs2924rVsm | |||
| 1.3.6.1.4.1.5205.2.34.1.1.5.1 | Scalarfgs2924rVsmState | read-write | current | VSM state. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.34.1.1.5.2 | Scalarfgs2924rVsmRole | read-write | current | VSM Role. 0 - Slave 1 - Master |
| 1.3.6.1.4.1.5205.2.34.1.1.5.3 | Scalarfgs2924rVsmGroupid | read-write | current | VSM Group ID. |
| 1.3.6.1.4.1.5205.2.34.1.2 | Nodefgs2924rSnmp | |||
| 1.3.6.1.4.1.5205.2.34.1.2.1 | Scalarfgs2924rGetCommunity | read-write | current | Get/Set the get-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.34.1.2.2 | Scalarfgs2924rSetCommunity | read-write | current | Get/Set the set-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.34.1.2.3 | Scalarfgs2924rTrapHostNumber | read-only | current | Get the number of trap hosts. |
| 1.3.6.1.4.1.5205.2.34.1.2.4 | Tablefgs2924rTrapHostTable | not-accessible | current | A list of trap host entry. The numbers of entries are given by the value of fgs2924rTrapHostNumber. |
| 1.3.6.1.4.1.5205.2.34.1.2.4.1 | Rowfgs2924rTrapHostEntry | not-accessible | current | This is the entry information for trap host. |
| 1.3.6.1.4.1.5205.2.34.1.2.4.1.1 | Columnfgs2924rTrapHostIndex | read-only | current | The index of the trap host entry. |
| 1.3.6.1.4.1.5205.2.34.1.2.4.1.2 | Columnfgs2924rTrapHostIP | read-write | current | This is the IP of the trap host. |
| 1.3.6.1.4.1.5205.2.34.1.2.4.1.3 | Columnfgs2924rTrapHostPort | read-write | current | This is the receiving-port number of the trap host. |
| 1.3.6.1.4.1.5205.2.34.1.2.4.1.4 | Columnfgs2924rTrapHostCommunity | read-write | current | The community name for the trap PDU. |
| 1.3.6.1.4.1.5205.2.34.1.3 | Nodefgs2924rAlarm | |||
| 1.3.6.1.4.1.5205.2.34.1.3.1 | Nodefgs2924rEvent | |||
| 1.3.6.1.4.1.5205.2.34.1.3.1.1 | Scalarfgs2924rEventNumber | read-only | current | Get the total number of alarm events. |
| 1.3.6.1.4.1.5205.2.34.1.3.1.2 | Tablefgs2924rEventTable | not-accessible | current | This is a list of alarm event entry. The numbers of entries are given by the value of fgs2924rEventNumber. |
| 1.3.6.1.4.1.5205.2.34.1.3.1.2.1 | Rowfgs2924rEventEntry | not-accessible | current | This is the entry information for alarm event. |
| 1.3.6.1.4.1.5205.2.34.1.3.1.2.1.1 | Columnfgs2924rEventIndex | read-only | current | This is the index of the alarm event entry. |
| 1.3.6.1.4.1.5205.2.34.1.3.1.2.1.2 | Columnfgs2924rEventName | read-only | current | This is the alarm event name. |
| 1.3.6.1.4.1.5205.2.34.1.3.1.2.1.3 | Columnfgs2924rEventSendEmail | read-write | current | Send email when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.34.1.3.1.2.1.4 | Columnfgs2924rEventSendTrap | read-write | current | Send trap when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.34.1.3.2 | Nodefgs2924rEmail | |||
| 1.3.6.1.4.1.5205.2.34.1.3.2.1 | Scalarfgs2924rEmailServer | read-write | current | This is the SMTP server for alarm event. |
| 1.3.6.1.4.1.5205.2.34.1.3.2.2 | Scalarfgs2924rEmailUsername | read-write | current | This is the Username of SMTP server. |
| 1.3.6.1.4.1.5205.2.34.1.3.2.3 | Scalarfgs2924rEmailPassword | read-write | current | This is the User Password of SMTP server. |
| 1.3.6.1.4.1.5205.2.34.1.3.2.4 | Scalarfgs2924rEmailSender | read-write | current | This is the Sender of SMTP server. |
| 1.3.6.1.4.1.5205.2.34.1.3.2.5 | Scalarfgs2924rEmailReturnPath | read-write | current | This is the return path of mail. |
| 1.3.6.1.4.1.5205.2.34.1.3.2.6 | Scalarfgs2924rEmailUserNumber | read-only | current | The number of the email users that you want to send the alarm notification. |
| 1.3.6.1.4.1.5205.2.34.1.3.2.7 | Tablefgs2924rEmailUserTable | not-accessible | current | This is a list of email user entry. The numbers of entries are given by the value of fgs2924rEmailUserNumber. |
| 1.3.6.1.4.1.5205.2.34.1.3.2.7.1 | Rowfgs2924rEmailUserEntry | not-accessible | current | This is the Entry information for email user entry. |
| 1.3.6.1.4.1.5205.2.34.1.3.2.7.1.1 | Columnfgs2924rEmailUserIndex | read-only | current | This is the index of the email user entry. |
| 1.3.6.1.4.1.5205.2.34.1.3.2.7.1.2 | Columnfgs2924rEmailUserAddress | read-write | current | This is the email address of the email user entry. |
| 1.3.6.1.4.1.5205.2.34.1.5 | Nodefgs2924rConfiguration | |||
| 1.3.6.1.4.1.5205.2.34.1.5.1 | Nodefgs2924rSaveRestore | |||
| 1.3.6.1.4.1.5205.2.34.1.5.1.1 | Scalarfgs2924rSaveStart | read-write | current | Save current configuration into flash memory (Save as Start Configuration). Get this OID always return zero. 1 - save. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.34.1.5.1.2 | Scalarfgs2924rSaveUser | read-write | current | Save current configuration into flash memory (Save as User Configuration). Get this OID always return zero. 1 - save. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.34.1.5.1.3 | Scalarfgs2924rRestoreDefault | read-write | current | Restore factory default configuration. Get this OID always return zero. 2 - restore default included default ip address. 1 - restore default without changing c… |
| 1.3.6.1.4.1.5205.2.34.1.5.1.4 | Scalarfgs2924rRestoreUser | read-write | current | Restore user configuration. Get this OID always return zero. 1 - restore. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.34.1.5.2 | Nodefgs2924rConfigFile | |||
| 1.3.6.1.4.1.5205.2.34.1.5.2.1 | Scalarfgs2924rExportIpAddress | read-write | current | Get/Set the export tftp server. |
| 1.3.6.1.4.1.5205.2.34.1.5.2.2 | Scalarfgs2924rDoExportConfig | read-write | current | Do export-config. Get this OID always return zero. 1 - export current section. 2 - export user section. |
| 1.3.6.1.4.1.5205.2.34.1.5.2.3 | Scalarfgs2924rImportIpAddress | read-write | current | Get/Set the import tftp server. |
| 1.3.6.1.4.1.5205.2.34.1.5.2.4 | Scalarfgs2924rImportConfigName | read-write | current | Get/Set the import file path and name. |
| 1.3.6.1.4.1.5205.2.34.1.5.2.5 | Scalarfgs2924rDoImportConfig | read-write | current | Do import-config. Get this OID always return zero. 1 - import current section. 2 - import user section. |
| 1.3.6.1.4.1.5205.2.34.1.7 | Nodefgs2924rLog | |||
| 1.3.6.1.4.1.5205.2.34.1.7.1 | Scalarfgs2924rClearLog | read-write | current | Clear system log. Get this OID always return zero. 1 - clear log. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.34.1.7.4 | Scalarfgs2924rLogNumber | read-only | current | Get the number of current system log. |
| 1.3.6.1.4.1.5205.2.34.1.7.5 | Tablefgs2924rLogTable | not-accessible | current | This is a list of log entry. The numbers of entries are given by the value of fgs2924rLogNumber. |
| 1.3.6.1.4.1.5205.2.34.1.7.5.1 | Rowfgs2924rLogEntry | not-accessible | current | This is the Entry information for system log. |
| 1.3.6.1.4.1.5205.2.34.1.7.5.1.1 | Columnfgs2924rLogIndex | not-accessible | current | This is the index of the log entry. |
| 1.3.6.1.4.1.5205.2.34.1.7.5.1.2 | Columnfgs2924rLogEvent | read-only | current | This is the detail information of the log entry. |
| 1.3.6.1.4.1.5205.2.34.1.8 | Nodefgs2924rFirmware | |||
| 1.3.6.1.4.1.5205.2.34.1.8.1 | Scalarfgs2924rFirmwareIpAddress | read-write | current | Get/Set the firmware tftp server. |
| 1.3.6.1.4.1.5205.2.34.1.8.2 | Scalarfgs2924rFirmwareFileName | read-write | current | Get/Set the path and filename for firmware upgrading. |
| 1.3.6.1.4.1.5205.2.34.1.8.3 | Scalarfgs2924rDoFirmwareUpgrade | read-write | current | Do firmware upgrade. Get this OID always return zero. 1 - do firmware upgrade. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.34.1.9 | Nodefgs2924rPort | |||
| 1.3.6.1.4.1.5205.2.34.1.9.1 | Nodefgs2924rPortStatus | |||
| 1.3.6.1.4.1.5205.2.34.1.9.1.1 | Scalarfgs2924rPortStatusNumber | read-only | current | Get the number of port. |
| 1.3.6.1.4.1.5205.2.34.1.9.1.2 | Tablefgs2924rPortStatusTable | not-accessible | current | This is a list of port status entry. The numbers of entries are given by the value of fgs2924rPortStatusNumber. |
| 1.3.6.1.4.1.5205.2.34.1.9.1.2.1 | Rowfgs2924rPortStatusEntry | not-accessible | current | This is the entry(s) for port status information. |
| 1.3.6.1.4.1.5205.2.34.1.9.1.2.1.1 | Columnfgs2924rPortStatusIndex | read-only | current | This is the index of the port status entry. |
| 1.3.6.1.4.1.5205.2.34.1.9.1.2.1.2 | Columnfgs2924rPortStatusMedia | read-only | current | The port media type of the port status entry. |
| 1.3.6.1.4.1.5205.2.34.1.9.1.2.1.3 | Columnfgs2924rPortStatusPortState | read-only | current | This is the port state of the port status entry. |
| 1.3.6.1.4.1.5205.2.34.1.9.1.2.1.4 | Columnfgs2924rPortStatusLink | read-only | current | This is the port link of the port status entry. |
| 1.3.6.1.4.1.5205.2.34.1.9.1.2.1.5 | Columnfgs2924rPortStatusAutoNego | read-only | current | This is the auto negotiation of the port status entry. |
| 1.3.6.1.4.1.5205.2.34.1.9.1.2.1.6 | Columnfgs2924rPortStatusSpdDpx | read-only | current | This is the speed/duplex of the port status entry. |
| 1.3.6.1.4.1.5205.2.34.1.9.1.2.1.7 | Columnfgs2924rPortStatusFlwCtrlRx | read-only | current | This is the Rx flow control of the port status entry. |
| 1.3.6.1.4.1.5205.2.34.1.9.1.2.1.8 | Columnfgs2924rPortStatusFlwCtrlTx | read-only | current | This is the Tx flow control of the port status entry. |
| 1.3.6.1.4.1.5205.2.34.1.9.1.2.1.9 | Columnfgs2924rPortStatuDescription | read-only | current | This is the description of port. |
| 1.3.6.1.4.1.5205.2.34.1.9.2 | Nodefgs2924rPortConf | |||
| 1.3.6.1.4.1.5205.2.34.1.9.2.1 | Scalarfgs2924rPortConfNumber | read-only | current | Get the number of port configuration. |
| 1.3.6.1.4.1.5205.2.34.1.9.2.2 | Tablefgs2924rPortConfTable | not-accessible | current | This is a list of port configuration entry. The numbers of entries are given by the value of fgs2924rPortConfNumber. |
| 1.3.6.1.4.1.5205.2.34.1.9.2.2.1 | Rowfgs2924rPortConfEntry | not-accessible | current | This is the Entry(s) for port configuration information. |
| 1.3.6.1.4.1.5205.2.34.1.9.2.2.1.1 | Columnfgs2924rPortConfIndex | read-only | current | This is the index of the port configuration entry. |
| 1.3.6.1.4.1.5205.2.34.1.9.2.2.1.2 | Columnfgs2924rPortConfPortState | read-write | current | This is the port state of the port configuration entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.34.1.9.2.2.1.3 | Columnfgs2924rPortConfTPSpdDpx | read-write | current | This is the speed/duplex of the TP port configuration entry. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/Full. 5 - 1G/Full. -1 - no support. |
| 1.3.6.1.4.1.5205.2.34.1.9.2.2.1.4 | Columnfgs2924rPortConfSFPSpdDpx | read-write | current | This is the speed/duplex of the SFP port configuration entry. 0 - auto. 5 - 1G/Full. -1 - no support. |
| 1.3.6.1.4.1.5205.2.34.1.9.2.2.1.5 | Columnfgs2924rPortConfFlwCtrl | read-write | current | This is the flow control of the port configuration entry. 0 - disabled. 1 - symmetric. 2 - asymmetric(Tx). 3 - symmetric & asymmetric(Rx). |
| 1.3.6.1.4.1.5205.2.34.1.9.2.2.1.6 | Columnfgs2924rPortConfExcessiveCollisionMode | read-write | current | Set excessive collision mode. 0 - Discard. 1 - Restart. |
| 1.3.6.1.4.1.5205.2.34.1.9.2.2.1.7 | Columnfgs2924rPortConfDescription | read-write | current | This is the description of port. |
| 1.3.6.1.4.1.5205.2.34.1.9.2.2.1.8 | Columnfgs2924rPortConfPowerSaving | read-write | current | Set port power saving mode. 0 - Disable. 1 - Enable. Only 1~8 ports support power saving mode. -1 will be returned when access 9~24 ports. |
| 1.3.6.1.4.1.5205.2.34.1.9.3 | Nodefgs2924rSFPInfo | |||
| 1.3.6.1.4.1.5205.2.34.1.9.3.1 | Scalarfgs2924rSFPInfoNumber | read-only | current | Get the number of sfp info entry. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2 | Tablefgs2924rSFPInfoTable | not-accessible | current | A list of sfp info entry. The numbers of entries are given by the value of fgs2924rSFPInfoNumber. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2.1 | Rowfgs2924rSFPInfoEntry | not-accessible | current | Entry(s) for SFP information. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2.1.1 | Columnfgs2924rSFPInfoIndex | read-only | current | The index of the sfp info entry. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2.1.2 | Columnfgs2924rSFPConnectorType | read-only | current | Get connector type of the sfp. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2.1.3 | Columnfgs2924rSFPFiberType | read-only | current | Get fiber type of the sfp. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2.1.4 | Columnfgs2924rSFPWavelength | read-only | current | Get tx central wavelength of the sfp. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2.1.5 | Columnfgs2924rSFPBaudRate | read-only | current | Get baud rate of the sfp. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2.1.6 | Columnfgs2924rSFPVendorOUI | read-only | current | Get vendor OUI of the sfp. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2.1.7 | Columnfgs2924rSFPVendorName | read-only | current | Get vendor name of the sfp. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2.1.8 | Columnfgs2924rSFPVendorPN | read-only | current | Get vendor part number of the sfp. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2.1.9 | Columnfgs2924rSFPVendorRev | read-only | current | Get vendor revision number of the sfp. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2.1.10 | Columnfgs2924rSFPVendorSN | read-only | current | Get vendor serial number of the sfp. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2.1.11 | Columnfgs2924rSFPDateCode | read-only | current | Get data code of the sfp. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2.1.12 | Columnfgs2924rSFPTemperature | read-only | current | Get current temperature of the sfp. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2.1.13 | Columnfgs2924rSFPVcc | read-only | current | Get current internal supply voltage of the sfp. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2.1.14 | Columnfgs2924rSFPTxBias | read-only | current | Get current TX Bias of the sfp. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2.1.15 | Columnfgs2924rSFPTxPWR | read-only | current | Get current TX output power of the sfp. |
| 1.3.6.1.4.1.5205.2.34.1.9.3.2.1.16 | Columnfgs2924rSFPRxPWR | read-only | current | Get current Received Power of the sfp. |
| 1.3.6.1.4.1.5205.2.34.1.10 | Nodefgs2924rMirror | |||
| 1.3.6.1.4.1.5205.2.34.1.10.1 | Scalarfgs2924rMirroringPort | read-write | current | Get/Set the mirroring port. The port range is from 1 to 24. |
| 1.3.6.1.4.1.5205.2.34.1.10.2 | Tablefgs2924rMirroredPortsTable | not-accessible | current | This is a list of port configuration entry. The numbers of entries are given by the value of fgs2924rPortConfNumber. |
| 1.3.6.1.4.1.5205.2.34.1.10.2.1 | Rowfgs2924rMirroredPortsEntry | not-accessible | current | This is the Entry(s) for port configuration information. |
| 1.3.6.1.4.1.5205.2.34.1.10.2.1.1 | Columnfgs2924rMirroredPortIndex | read-only | current | This is the index of the mirrored port. |
| 1.3.6.1.4.1.5205.2.34.1.10.2.1.2 | Columnfgs2924rMirroredPortSrouceEnable | read-write | current | Set monitor source port. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.34.1.10.2.1.3 | Columnfgs2924rMirroredPortDestinationEnable | read-write | current | Set monitor destination port. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.34.1.11 | Nodefgs2924rMaxPktLen | |||
| 1.3.6.1.4.1.5205.2.34.1.11.1 | Scalarfgs2924rMaxPktLenPortNumber | read-only | current | Get the number of Max. packet length. |
| 1.3.6.1.4.1.5205.2.34.1.11.2 | Tablefgs2924rMaxPktLenConfTable | not-accessible | current | This is a list of Max. packet length entry. The numbers of entries are given by the value of fgs2924rMaxPktLenPortNumber. |
| 1.3.6.1.4.1.5205.2.34.1.11.2.1 | Rowfgs2924rMaxPktLenConfEntry | not-accessible | current | Entry(s) for Max. packet length information. |
| 1.3.6.1.4.1.5205.2.34.1.11.2.1.1 | Columnfgs2924rMaxPktLenConfIndex | read-only | current | This is the index of the Max. packet length entry. |
| 1.3.6.1.4.1.5205.2.34.1.11.2.1.2 | Columnfgs2924rMaxPktLenConfSetting | read-write | current | Get/Set the Max. packet length. The Max. packet length is 1518~9600. |
| 1.3.6.1.4.1.5205.2.34.1.12 | Nodefgs2924rLoopDetectedConf | |||
| 1.3.6.1.4.1.5205.2.34.1.12.1 | Scalarfgs2924rLoopDetectedNumber | read-only | current | Get the number of loop detected entry. |
| 1.3.6.1.4.1.5205.2.34.1.12.2 | Tablefgs2924rLoopDetectedTable | not-accessible | current | A list of loop detected entry. The numbers of entries are given by the value of fgs2924rLoopDetectedNumber. |
| 1.3.6.1.4.1.5205.2.34.1.12.2.1 | Rowfgs2924rLoopDetectedEntry | not-accessible | current | Entry(s) for loop detected information. |
| 1.3.6.1.4.1.5205.2.34.1.12.2.1.1 | Columnfgs2924rLoopDetectedfIndex | read-only | current | The index of the loop detected entry. |
| 1.3.6.1.4.1.5205.2.34.1.12.2.1.2 | Columnfgs2924rLoopDetectedPort | read-write | current | The state of the loop detected entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.34.1.12.2.1.3 | Columnfgs2924rLoopDetectedLockedPort | read-write | current | The current status of the loop detected port. Get: 0 - unlocked 1 - locked due to the loop condition Set: 0 - unlock the port 1 - do nothing |
| 1.3.6.1.4.1.5205.2.34.1.13 | Nodefgs2924rManagementPolicy | |||
| 1.3.6.1.4.1.5205.2.34.1.13.1 | Scalarfgs2924rManagementSecurityNumber | read-only | current | This is the index of the management security entry. |
| 1.3.6.1.4.1.5205.2.34.1.13.2 | Scalarfgs2924rManagementSecurityEntryCreate | read-write | current | Create management security entry |
| 1.3.6.1.4.1.5205.2.34.1.13.3 | Tablefgs2924rManagementSecurityTable | not-accessible | current | This is a list of FGS2924RManagementSecurityEntry. The numbers of entries are given by ManagementSecurityNumber. |
| 1.3.6.1.4.1.5205.2.34.1.13.3.1 | Rowfgs2924rManagementSecurityEntry | not-accessible | current | This is the Entry(s) for Management Security configuration information. |
| 1.3.6.1.4.1.5205.2.34.1.13.3.1.1 | Columnfgs2924rManagementSecurityIndex | read-only | current | This is the index of the management policy configuration entry. |
| 1.3.6.1.4.1.5205.2.34.1.13.3.1.2 | Columnfgs2924rManagementSecurityName | read-write | current | This is the username of the management security entry. |
| 1.3.6.1.4.1.5205.2.34.1.13.3.1.3 | Columnfgs2924rManagementSecurityIpRange | read-write | current | This is the ip range of the management security entry. |
| 1.3.6.1.4.1.5205.2.34.1.13.3.1.4 | Columnfgs2924rManagementSecurityIncomigPort | read-write | current | This is the incoming port of the management security entry. |
| 1.3.6.1.4.1.5205.2.34.1.13.3.1.5 | Columnfgs2924rManagementSecurityAccessType | read-write | current | Set management security access type. 0 - any. 1 - http. 2 - telnet 3 - snmp |
| 1.3.6.1.4.1.5205.2.34.1.13.3.1.6 | Columnfgs2924rManagementSecurityAction | read-write | current | Set management security action. 0 - deny. 1 - accept. |
| 1.3.6.1.4.1.5205.2.34.1.13.3.1.7 | Columnfgs2924rManagementSecurityEntryAction | read-write | current | The row status of management security entry. 1 - active. 2 - notInService. 3 - delete. |
| 1.3.6.1.4.1.5205.2.34.1.14 | Nodefgs2924rVLAN | |||
| 1.3.6.1.4.1.5205.2.34.1.14.1 | Nodefgs2924rVlanConf | |||
| 1.3.6.1.4.1.5205.2.34.1.14.1.1 | Scalarfgs2924rVlanMode | read-write | current | This is the VLAN Mode configuration, default is tag base. 0 - tag-base 1 - port-base |
| 1.3.6.1.4.1.5205.2.34.1.14.1.2 | Scalarfgs2924rManagementVlan | read-write | current | To specify a vlan id that can communicate with the device. |
| 1.3.6.1.4.1.5205.2.34.1.14.1.3 | Scalarfgs2924rPortIsolation | read-write | current | Selected port(s) only can communicate with unselected port(s). Selected port(s) will be isolated with each other. |
| 1.3.6.1.4.1.5205.2.34.1.14.1.4 | Scalarfgs2924rTagIdentifier | read-write | current | Set double tag type. 0: 0x8100 1: 0x88a8 |
| 1.3.6.1.4.1.5205.2.34.1.14.2 | Nodefgs2924rTagBaseVlanGroup | |||
| 1.3.6.1.4.1.5205.2.34.1.14.2.1 | Scalarfgs2924rTagBaseVlanNumber | read-write | current | The number of tagged-based VLAN. |
| 1.3.6.1.4.1.5205.2.34.1.14.2.2 | Scalarfgs2924rTagBaseVlanGroupEntryCreate | read-write | current | To create a VLAN entry in the tagged-based VLAN table. 0 : none, 1~4094 : specify the vid of the created VLAN. |
| 1.3.6.1.4.1.5205.2.34.1.14.2.3 | Tablefgs2924rTagBaseVlanGroupTable | not-accessible | current | A list of tagged-based VLAN group entry. The number of entries can be taken from fgs2924rTagBaseVlanNumber. |
| 1.3.6.1.4.1.5205.2.34.1.14.2.3.1 | Rowfgs2924rTagBaseVlanGroupEntry | not-accessible | current | This is the Entry(s) for Tag Base VLAN Group configuration information. |
| 1.3.6.1.4.1.5205.2.34.1.14.2.3.1.1 | Columnfgs2924rTagBaseVlanVid | not-accessible | current | This is the index of the Tag Base VLAN Group configuration entry. |
| 1.3.6.1.4.1.5205.2.34.1.14.2.3.1.2 | Columnfgs2924rTagBaseVlanName | read-write | current | This is the name of the VLAN. |
| 1.3.6.1.4.1.5205.2.34.1.14.2.3.1.3 | Columnfgs2924rTagBaseVlanIgmpProxy | read-write | current | To support IGMP proxy in this VLAN. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.34.1.14.2.3.1.4 | Columnfgs2924rTagBaseVlanPrivateVlan | read-write | current | To apply the port isolation configuration. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.34.1.14.2.3.1.5 | Columnfgs2924rTagBaseVlanGvrp | read-write | current | This VLAN can be propagated by gvrp. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.34.1.14.2.3.1.6 | Columnfgs2924rTagBaseVlanMemberPort | read-write | current | The member port(s) of this VLAN. |
| 1.3.6.1.4.1.5205.2.34.1.14.2.3.1.7 | Columnfgs2924rTagBaseVlanEntryAction | read-write | current | The row status of VLAN. 1 - active 2 - notInService 3 - delete |
| 1.3.6.1.4.1.5205.2.34.1.14.3 | Tablefgs2924rVlanPortConfTable | not-accessible | current | This is the port parameters for tagged-based VLAN. |
| 1.3.6.1.4.1.5205.2.34.1.14.3.1 | Rowfgs2924rVlanPortConfEntry | not-accessible | current | These are the tagged-based VLAN parameters for each ports. |
| 1.3.6.1.4.1.5205.2.34.1.14.3.1.1 | Columnfgs2924rVlanPortConfIndex | not-accessible | current | This is the index of the Port Base VLAN Group configuration entry. |
| 1.3.6.1.4.1.5205.2.34.1.14.3.1.2 | Columnfgs2924rVlanPortConfVlanAware | read-write | current | Set vlan awareness. 0 - Ignore incoming VLAN tag, using pvid as VLAN classification. 1 - Using VLAN tag information first. |
| 1.3.6.1.4.1.5205.2.34.1.14.3.1.3 | Columnfgs2924rVlanPortConfIngressFiltering | read-write | current | If the packet is tagged with VLAN information, the ingress port will first determine if the ingress port itself is a member of the tagged VLAN. 0 - Disable, do… |
| 1.3.6.1.4.1.5205.2.34.1.14.3.1.4 | Columnfgs2924rVlanPortConfFrameType | read-write | current | To determine what kind of packet the port should accept. 0 - All 1 - Only tagged packet |
| 1.3.6.1.4.1.5205.2.34.1.14.3.1.5 | Columnfgs2924rVlanPortConfPvid | read-write | current | Each physical port has a parameter called PVID. All untagged frames are assigned to the LAN specified in the PVID parameter. When a tagged frame is received by… |
| 1.3.6.1.4.1.5205.2.34.1.14.3.1.6 | Columnfgs2924rVlanPortConfRole | read-write | current | Set egress rule: configure the port role. 0 - Access: won't send packet with tag. 1 - Trunk: always send packet with tag. 2 - Hybrid: always send packet with t… |
| 1.3.6.1.4.1.5205.2.34.1.14.3.1.7 | Columnfgs2924rVlanPortConfUntagVid | read-write | current | Won't send packet with tag in one specific vid. Only available in hybrid mode. |
| 1.3.6.1.4.1.5205.2.34.1.14.3.1.8 | Columnfgs2924rVlanPortConfDoubleTag | read-write | current | This is the double tag configuration for ports. 0 1 2 |
| 1.3.6.1.4.1.5205.2.34.1.14.4 | Nodefgs2924rPortBaseVlanGroup | |||
| 1.3.6.1.4.1.5205.2.34.1.14.4.1 | Scalarfgs2924rPortBaseVlanNumber | read-write | current | Total numbers for port based vlan. |
| 1.3.6.1.4.1.5205.2.34.1.14.4.2 | Scalarfgs2924rPortBaseVlanGroupEntryCreate | read-write | current | Create a temp vlan in port-based vlan table. 0 : none, 1 : create a new port-based vlan. |
| 1.3.6.1.4.1.5205.2.34.1.14.4.3 | Tablefgs2924rPortBaseVlanGroupTable | not-accessible | current | A list of port base vlan group entry. The numbers of entries are given by the value of fgs2924rPortBaseVlanNumber. |
| 1.3.6.1.4.1.5205.2.34.1.14.4.3.1 | Rowfgs2924rPortBaseVlanGroupEntry | not-accessible | current | This is the Entry(s) for Port Base VLAN Group configuration information. |
| 1.3.6.1.4.1.5205.2.34.1.14.4.3.1.1 | Columnfgs2924rPortBaseVlanGroupIndex | not-accessible | current | This is the index of the Port Base VLAN Group configuration entry. |
| 1.3.6.1.4.1.5205.2.34.1.14.4.3.1.2 | Columnfgs2924rPortBaseVlanGroupName | read-write | current | The name of vlan. |
| 1.3.6.1.4.1.5205.2.34.1.14.4.3.1.3 | Columnfgs2924rPortBaseVlanGroupMembers | read-write | current | The member of vlan. |
| 1.3.6.1.4.1.5205.2.34.1.14.4.3.1.4 | Columnfgs2924rPortBaseVlanGroupEntryAction | read-write | current | The row status of vlan. 1 - active 2 - notInService 3 - delete |
| 1.3.6.1.4.1.5205.2.34.1.15 | Nodefgs2924rMacTableInfo | |||
| 1.3.6.1.4.1.5205.2.34.1.15.1 | Nodefgs2924rMacTableConf | |||
| 1.3.6.1.4.1.5205.2.34.1.15.1.1 | Scalarfgs2924rMacAgeTime | read-write | current | Set the Mac Table Aging Time (10~1000000 Secs). 0 : Disable. |
| 1.3.6.1.4.1.5205.2.34.1.15.1.2 | Tablefgs2924rMacTableLearningConfTable | not-accessible | current | A list of Mac Learning entry. |
| 1.3.6.1.4.1.5205.2.34.1.15.1.2.1 | Rowfgs2924rMacTableLearningConfEntry | not-accessible | current | This is the Entry(s) for Mac Learning table information. |
| 1.3.6.1.4.1.5205.2.34.1.15.1.2.1.1 | Columnfgs2924rMacTableLearningConfIndex | not-accessible | current | This is the index of the Learning MAC Table Group configuration entry. |
| 1.3.6.1.4.1.5205.2.34.1.15.1.2.1.2 | Columnfgs2924rMacTableLearningConfstate | read-write | current | Set mac table learning. 0 - Auto 1 - Disable 2 - Secure |
| 1.3.6.1.4.1.5205.2.34.1.15.2 | Nodefgs2924rMacTableStaticFilter | |||
| 1.3.6.1.4.1.5205.2.34.1.15.2.1 | Scalarfgs2924rMacTableStaticFilterNumber | read-only | current | Total numbers for static filter entry of Mac Table. |
| 1.3.6.1.4.1.5205.2.34.1.15.2.2 | Scalarfgs2924rMacTableStaticFilterEntryCreate | read-write | current | Create a temp Filter entry in Mac Table. 0 : none, 1 : create a new entry |
| 1.3.6.1.4.1.5205.2.34.1.15.2.3 | Tablefgs2924rMacTableStaticFilterTable | not-accessible | current | A list of static filter entry. The numbers of entries are given by the value of fgs2924rMacTableStaticFilterNumber. |
| 1.3.6.1.4.1.5205.2.34.1.15.2.3.1 | Rowfgs2924rMacTableStaticFilterEntry | not-accessible | current | This is the Entry(s) for static filter information. |
| 1.3.6.1.4.1.5205.2.34.1.15.2.3.1.1 | Columnfgs2924rMacTableStaticFilterIndex | not-accessible | current | This is the index of the Static Filter MAC Table Group configuration entry. |
| 1.3.6.1.4.1.5205.2.34.1.15.2.3.1.2 | Columnfgs2924rMacTableStaticFilterMac | read-write | current | The static filter mac in Mac Table |
| 1.3.6.1.4.1.5205.2.34.1.15.2.3.1.3 | Columnfgs2924rMacTableStaticFilterVid | read-write | current | The filter vid in Mac Table |
| 1.3.6.1.4.1.5205.2.34.1.15.2.3.1.4 | Columnfgs2924rMacTableStaticFilterAlias | read-write | current | The filter alias name in Mac Table |
| 1.3.6.1.4.1.5205.2.34.1.15.2.3.1.5 | Columnfgs2924rMacTableStaticFilterEntryAction | read-write | current | The row status of filter entry. 1 - active 2 - notInService 3 - delete |
| 1.3.6.1.4.1.5205.2.34.1.15.3 | Nodefgs2924rMacTableStaticForward | |||
| 1.3.6.1.4.1.5205.2.34.1.15.3.1 | Scalarfgs2924rMacTableStaticForwardNumber | read-only | current | Total numbers for static forward entry of Mac Table. |
| 1.3.6.1.4.1.5205.2.34.1.15.3.2 | Scalarfgs2924rMacTableStaticForwardEntryCreate | read-write | current | Create a temp forward entry in Mac Table. 0 : none, 1 : create a new entry |
| 1.3.6.1.4.1.5205.2.34.1.15.3.3 | Tablefgs2924rMacTableStaticForwardTable | not-accessible | current | A list of static forward entry. The numbers of entries are given by the value of fgs2924rMacTableStaticForwardNumber. |
| 1.3.6.1.4.1.5205.2.34.1.15.3.3.1 | Rowfgs2924rMacTableStaticForwardEntry | not-accessible | current | A list of static forwarding table entry. |
| 1.3.6.1.4.1.5205.2.34.1.15.3.3.1.1 | Columnfgs2924rMacTableStaticForwardIndex | not-accessible | current | This is the index of the Static Forward MAC Table Group configuration entry. |
| 1.3.6.1.4.1.5205.2.34.1.15.3.3.1.2 | Columnfgs2924rMacTableStaticForwardMac | read-write | current | The static forwarding Mac in Mac Table |
| 1.3.6.1.4.1.5205.2.34.1.15.3.3.1.3 | Columnfgs2924rMacTableStaticForwardPort | read-write | current | To specify a destination port for a mac address in mac table. |
| 1.3.6.1.4.1.5205.2.34.1.15.3.3.1.4 | Columnfgs2924rMacTableStaticForwardVid | read-write | current | To specify a VLAN ID for a mac address in mac table. |
| 1.3.6.1.4.1.5205.2.34.1.15.3.3.1.5 | Columnfgs2924rMacTableStaticForwardAlias | read-write | current | To specify an alias for a mac address in mac table. |
| 1.3.6.1.4.1.5205.2.34.1.15.3.3.1.6 | Columnfgs2924rMacTableStaticForwardEntryAction | read-write | current | The row status of filter entry. 1 - active 2 - notInService 3 - delete |
| 1.3.6.1.4.1.5205.2.34.1.15.4 | Nodefgs2924rMacAlias | |||
| 1.3.6.1.4.1.5205.2.34.1.15.4.1 | Scalarfgs2924rMacAliasNumber | read-only | current | Mac Alias Total Number(0~1024). |
| 1.3.6.1.4.1.5205.2.34.1.15.4.2 | Scalarfgs2924rMacAliasEntryCreate | read-only | current | Create a temp Mac alias entry in Mac Table. 0 : none, 1 : create a new entry |
| 1.3.6.1.4.1.5205.2.34.1.15.4.3 | Tablefgs2924rMacAliasTable | not-accessible | current | A list of Mac Alias entry. The numbers of entries are given by the value of fgs2924rMacAliasNumber. |
| 1.3.6.1.4.1.5205.2.34.1.15.4.3.1 | Rowfgs2924rMacAliasEntry | not-accessible | current | Entry(s) for Mac Alias. |
| 1.3.6.1.4.1.5205.2.34.1.15.4.3.1.1 | Columnfgs2924rMacAliasIndex | not-accessible | current | The index of the static mac alias entry. |
| 1.3.6.1.4.1.5205.2.34.1.15.4.3.1.2 | Columnfgs2924rAliasMac | read-write | current | The Mac of the static mac alias entry. |
| 1.3.6.1.4.1.5205.2.34.1.15.4.3.1.3 | Columnfgs2924rAliasName | read-write | current | The alias name of the static mac alias entry. |
| 1.3.6.1.4.1.5205.2.34.1.15.4.3.1.4 | Columnfgs2924rMacAliasEntryAction | read-write | current | The row status of mac alias entry. 1 - active 2 - notInService 3 - delete |
| 1.3.6.1.4.1.5205.2.34.1.16 | Nodefgs2924rGVRPInfo | |||
| 1.3.6.1.4.1.5205.2.34.1.16.1 | Nodefgs2924rGvrpConf | |||
| 1.3.6.1.4.1.5205.2.34.1.16.1.1 | Scalarfgs2924rGvrpConfState | read-write | current | The GVRP state 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.34.1.16.1.2 | Tablefgs2924rGvrpConfTable | not-accessible | current | A list of GVRP entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.1.2.1 | Rowfgs2924rGvrpConfEntry | not-accessible | current | This is the Entry(s) for gvrp information. |
| 1.3.6.1.4.1.5205.2.34.1.16.1.2.1.1 | Columnfgs2924rGvrpConfIndex | not-accessible | current | This is the index of the gvrp entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.1.2.1.2 | Columnfgs2924rGvrpConfJoinTime | read-write | current | This is the join-time of the gvrp entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.1.2.1.3 | Columnfgs2924rGvrpConfLeaveTime | read-write | current | This is the leave-time of the gvrp entry. default:60 centisecond |
| 1.3.6.1.4.1.5205.2.34.1.16.1.2.1.4 | Columnfgs2924rGvrpConfLeaveAllTime | read-write | current | Set GVRP leave_all_time. default: 1000 unit time |
| 1.3.6.1.4.1.5205.2.34.1.16.1.2.1.5 | Columnfgs2924rGvrpConfDefaultAppMode | read-write | current | Set GVRP applicant. [default: Normal] 0 - Normal 1 - Non-Participant |
| 1.3.6.1.4.1.5205.2.34.1.16.1.2.1.6 | Columnfgs2924rGvrpConfDefaultRegMode | read-write | current | Set GVRP registrar. [default: Normal] 0 - Normal 1 - Fixed 2 - Forbidden |
| 1.3.6.1.4.1.5205.2.34.1.16.1.2.1.7 | Columnfgs2924rGvrpConfRestrictedMode | read-write | current | Set GVRP restricted. [default: Disable] 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.34.1.16.2 | Nodefgs2924rGvrpCounter | |||
| 1.3.6.1.4.1.5205.2.34.1.16.2.1 | Tablefgs2924rGvrpCounterTable | not-accessible | current | This is a list of FGS2924RGvrpCounterEntry. |
| 1.3.6.1.4.1.5205.2.34.1.16.2.1.1 | Rowfgs2924rGvrpCounterEntry | not-accessible | current | This is the Entry(s) for gvrp counter information. |
| 1.3.6.1.4.1.5205.2.34.1.16.2.1.1.1 | Columnfgs2924rGvrpCounterIndex | not-accessible | current | This is the index of the gvrp counter entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.2.1.1.2 | Columnfgs2924rGvrpCounterRxTotalGvrpPkts | read-only | current | Get the amount of all received gvrp packets of the gvrp counter entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.2.1.1.3 | Columnfgs2924rGvrpCounterRxInvalidGvrpPkts | read-only | current | Get the amount of received invalid gvrp packets of the gvrp counter entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.2.1.1.4 | Columnfgs2924rGvrpCounterRxLeaveAllMsg | read-only | current | Get the amount of received leave-all-message of the gvrp counter entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.2.1.1.5 | Columnfgs2924rGvrpCounterRxJoinEmptyMsg | read-only | current | Get the amount of received join-empty-message of the gvrp counter entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.2.1.1.6 | Columnfgs2924rGvrpCounterRxJoinInMsg | read-only | current | Get the amount of received join-in-message of the gvrp counter entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.2.1.1.7 | Columnfgs2924rGvrpCounterRxLeaveEmptyMsg | read-only | current | Get the amount of received leave-empty-message of the gvrp counter entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.2.1.1.8 | Columnfgs2924rGvrpCounterRxEmptyMsg | read-only | current | Get the amount of received empty-message of the gvrp counter entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.2.1.1.9 | Columnfgs2924rGvrpCounterTxTotalGvrpPkts | read-only | current | Get the amount of all transmitted gvrp packets of the gvrp counter entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.2.1.1.10 | Columnfgs2924rGvrpCounterTxLeaveAllMsg | read-only | current | Get the amount of transmitted leave-all-message of the gvrp counter entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.2.1.1.11 | Columnfgs2924rGvrpCounterTxJoinEmptyMsg | read-only | current | Get the amount of transmitted join-empty-message of the gvrp counter entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.2.1.1.12 | Columnfgs2924rGvrpCounterTxJoinInMsg | read-only | current | Get the amount of transmitted join-in-message of the gvrp counter entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.2.1.1.13 | Columnfgs2924rGvrpCounterTxLeaveEmptyMsg | read-only | current | Get the amount of transmitted leave-empty-message of the gvrp counter entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.2.1.1.14 | Columnfgs2924rGvrpCounterTxEmptyMsg | read-only | current | Get the amount of transmitted empty-message of the gvrp counter entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.3 | Nodefgs2924rGvrpGroup | |||
| 1.3.6.1.4.1.5205.2.34.1.16.3.1 | Scalarfgs2924rGvrpGroupNumber | read-only | current | Get the number of the gvrp group entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.3.2 | Tablefgs2924rGvrpGroupTable | not-accessible | current | This is a list of FGS2924RGvrpGroupEntry. |
| 1.3.6.1.4.1.5205.2.34.1.16.3.2.1 | Rowfgs2924rGvrpGroupEntry | not-accessible | current | This is the Entry(s) for gvrp group information. |
| 1.3.6.1.4.1.5205.2.34.1.16.3.2.1.1 | Columnfgs2924rGvrpGroupId | read-only | current | This is the index of the gvrp group entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.3.2.1.2 | Columnfgs2924rGvrpGroupVid | read-only | current | This is the vlan id of the gvrp grout entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.3.2.1.3 | Columnfgs2924rGvrpGroupMemberPort | read-only | current | The member ports of the gvrp grout entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.3.3 | Tablefgs2924rGvrpGroupAdministrativeCtrlTable | not-accessible | current | This is a list of FGS2924RGvrpGroupAdministrativeCtrlEntry. |
| 1.3.6.1.4.1.5205.2.34.1.16.3.3.1 | Rowfgs2924rGvrpGroupAdministrativeCtrlEntry | not-accessible | current | This is the Entry(s) for gvrp group administrative information. |
| 1.3.6.1.4.1.5205.2.34.1.16.3.3.1.1 | Columnfgs2924rGvrpGroupAdministrativeCtrlVid | read-only | current | This is the vlan id of the gvrp-group-admin entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.3.3.1.2 | Columnfgs2924rGvrpGroupAdministrativeCtrlPort | read-only | current | This is the port number of the gvrp-group-admin entry. |
| 1.3.6.1.4.1.5205.2.34.1.16.3.3.1.3 | Columnfgs2924rGvrpGroupAdministrativeCtrlApp | read-write | current | Set gvrp applicant. 0 - Normal 1 - Non-Participant |
| 1.3.6.1.4.1.5205.2.34.1.16.3.3.1.4 | Columnfgs2924rGvrpGroupAdministrativeCtrlReg | read-write | current | Set gvrp registrar. 0 - Normal 1 - Fixed 2 - Forbidden |
| 1.3.6.1.4.1.5205.2.34.1.17 | Nodefgs2924rQosInfo | |||
| 1.3.6.1.4.1.5205.2.34.1.17.1 | Nodefgs2924rQosPortConf | |||
| 1.3.6.1.4.1.5205.2.34.1.17.1.1 | Scalarfgs2924rQosNumOfClasses | read-write | current | Effective class number, it can be set 1, 2, or 4. 1 means only one class available, all packets will be treat the same. 2 means two classes available, packets … |
| 1.3.6.1.4.1.5205.2.34.1.17.1.2 | Tablefgs2924rQosPortConfTable | not-accessible | current | QoS parameter for ports. |
| 1.3.6.1.4.1.5205.2.34.1.17.1.2.1 | Rowfgs2924rQosPortConfEntry | not-accessible | current | QoS parameter for ports. |
| 1.3.6.1.4.1.5205.2.34.1.17.1.2.1.1 | Columnfgs2924rQosPortConfIndex | not-accessible | current | This is the port number for QoS configuration. |
| 1.3.6.1.4.1.5205.2.34.1.17.1.2.1.2 | Columnfgs2924rQosPortConfDefaultClasses | read-write | current | This is the default class for packets mismatch the specified QCL setting. 0 - Low 1 - Normal 2 - Medium 3 - High |
| 1.3.6.1.4.1.5205.2.34.1.17.1.2.1.3 | Columnfgs2924rQosPortConfQCL | read-write | current | Designate the QCL for the specific port. QCL is from 1 to 24. |
| 1.3.6.1.4.1.5205.2.34.1.17.1.2.1.4 | Columnfgs2924rQosPortConfUserPriority | read-write | current | This is the default ingress VLAN tag priority. Priority is from 0 to 7. |
| 1.3.6.1.4.1.5205.2.34.1.17.1.2.1.5 | Columnfgs2924rQosPortConfQueuingMode | read-write | current | Set qos port queuing mode. 0 - Strict Priority 1 - Weighted Fair |
| 1.3.6.1.4.1.5205.2.34.1.17.1.2.1.6 | Columnfgs2924rQosPortConfQueueWeightedLow | read-write | current | To specify how many quotas the low queue can be distributed. Only available when the queuing mode is Weighted Fair. QueueWeighted is 1, 2, 4, 8. |
| 1.3.6.1.4.1.5205.2.34.1.17.1.2.1.7 | Columnfgs2924rQosPortConfQueueWeightedNormal | read-write | current | To specify how many quotas the normal queue can be distributed. Only available when the queuing mode is Weighted Fair. QueueWeighted is 1, 2, 4, 8. |
| 1.3.6.1.4.1.5205.2.34.1.17.1.2.1.8 | Columnfgs2924rQosPortConfQueueWeightedMedium | read-write | current | To specify how many quotas the medium queue can be distributed. Only available when the queuing mode is Weighted Fair. QueueWeighted is 1, 2, 4, 8. |
| 1.3.6.1.4.1.5205.2.34.1.17.1.2.1.9 | Columnfgs2924rQosPortConfQueueWeightedHigh | read-write | current | To specify how many quotas the high queue can be distributed. Only available when the queuing mode is Weighted Fair. QueueWeighted is 1, 2, 4, 8. |
| 1.3.6.1.4.1.5205.2.34.1.17.3 | Nodefgs2924rQosRateLimiters | |||
| 1.3.6.1.4.1.5205.2.34.1.17.3.1 | Tablefgs2924rQosRateLimitersTable | not-accessible | current | This is the port bandwidth configuration. |
| 1.3.6.1.4.1.5205.2.34.1.17.3.1.1 | Rowfgs2924rQosRateLimitersEntry | not-accessible | current | This is the port bandwidth configuration. |
| 1.3.6.1.4.1.5205.2.34.1.17.3.1.1.1 | Columnfgs2924rQosRateLimitersIndex | not-accessible | current | This is the port number for rate limit configuration |
| 1.3.6.1.4.1.5205.2.34.1.17.3.1.1.2 | Columnfgs2924rQosRateLimitersPolicer | read-write | current | This is the ingress bandwidth function for specific port. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.34.1.17.3.1.1.3 | Columnfgs2924rQosRateLimitersPolicerRate | read-write | current | To set the ingress bandwidth for specific port. Available value is from 500k to 1000000k |
| 1.3.6.1.4.1.5205.2.34.1.17.3.1.1.4 | Columnfgs2924rQosRateLimitersShaper | read-write | current | This is the egress bandwidth function for specific port. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.34.1.17.3.1.1.5 | Columnfgs2924rQosRateLimitersShaperRate | read-write | current | To set the ingress bandwidth for specific port. Available value is from 500k to 1000000k |
| 1.3.6.1.4.1.5205.2.34.1.17.4 | Nodefgs2924rQosStormCtrl | |||
| 1.3.6.1.4.1.5205.2.34.1.17.4.1 | Scalarfgs2924rQosStromCtrlFloodedUnicastStatus | read-write | current | This is the flooded unicast suppression function for this device. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.34.1.17.4.2 | Scalarfgs2924rQosStromCtrlFloodedUnicastRate | read-write | current | To set the flooded unicast suppression for this device. 1 | 2 | 4 | 8 | 16 | 32 | 64 | 128 | 256 | 512 | 1k | 2k | 4k | 8k | 16k | 32k |64k | 128k | 256k | 512… |
| 1.3.6.1.4.1.5205.2.34.1.17.4.3 | Scalarfgs2924rQosStromCtrlMulticastStatus | read-write | current | This is the multicast suppression function for this device. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.34.1.17.4.4 | Scalarfgs2924rQosStromCtrlMulticastRate | read-write | current | To set the multicast suppression for this device. 1 | 2 | 4 | 8 | 16 | 32 | 64 | 128 | 256 | 512 | 1k | 2k | 4k | 8k | 16k | 32k |64k | 128k | 256k | 512k | 10… |
| 1.3.6.1.4.1.5205.2.34.1.17.4.5 | Scalarfgs2924rQosStromCtrlBroadcastStatus | read-write | current | This is the broadcast suppression function for this device. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.34.1.17.4.6 | Scalarfgs2924rQosStromCtrlBroadcastRate | read-write | current | To set the broadcast suppression for this device. 1 | 2 | 4 | 8 | 16 | 32 | 64 | 128 | 256 | 512 | 1k | 2k | 4k | 8k | 16k | 32k |64k | 128k | 256k | 512k | 10… |
| 1.3.6.1.4.1.5205.2.34.1.17.5 | Nodefgs2924rQosQCL | |||
| 1.3.6.1.4.1.5205.2.34.1.17.5.1 | Scalarfgs2924rQosQclCreate | read-write | current | Specify a QCL number where the QCE will be created. Parameter is available from 1 ~ 24. |
| 1.3.6.1.4.1.5205.2.34.1.17.5.2 | Tablefgs2924rQosQclTable | not-accessible | current | This is the Qcl table. |
| 1.3.6.1.4.1.5205.2.34.1.17.5.2.1 | Rowfgs2924rQosQclEntry | not-accessible | current | This is the Entry(s) for qcl entry information. |
| 1.3.6.1.4.1.5205.2.34.1.17.5.2.1.1 | Columnfgs2924rQosQclNo | not-accessible | current | Display which QCL is specified. |
| 1.3.6.1.4.1.5205.2.34.1.17.5.2.1.2 | Columnfgs2924rQosQclQceListNo | not-accessible | current | Index of qce entry. |
| 1.3.6.1.4.1.5205.2.34.1.17.5.2.1.3 | Columnfgs2924rQosQclQceMoveTo | not-accessible | current | Designate the position where the QCE will be moved to. |
| 1.3.6.1.4.1.5205.2.34.1.17.5.2.1.4 | Columnfgs2924rQosQclQceType | read-write | current | Specify the qce type. 0:EthernetType 1:VLAN ID 2:UDP/TCP Port 3:DSCP 4:Tos 5:TagPriority |
| 1.3.6.1.4.1.5205.2.34.1.17.5.2.1.5 | Columnfgs2924rQosQclQceValue | read-write | current | Specify the qce entry value. Only available for 0:EthernetType 1:VLAN ID 2:UDP/TCP Port 3:DSCP. Input numbers in hexadecimal for 0:Ethernet Type, decimal for 1… |
| 1.3.6.1.4.1.5205.2.34.1.17.5.2.1.6 | Columnfgs2924rQosQclQceTrafficClass | read-write | current | Specify the qce entry traffic class. Available options are: low, normal, medium and high. |
| 1.3.6.1.4.1.5205.2.34.1.17.5.2.1.7 | Columnfgs2924rQosQclQcePriority0Class | read-write | current | Specify the qce entry traffic class. Available options are: low, normal, medium and high. Only works on 4:Tos 5:TagPriority. |
| 1.3.6.1.4.1.5205.2.34.1.17.5.2.1.8 | Columnfgs2924rQosQclQcePriority1Class | read-write | current | Specify the qce entry traffic class. Available options are: low, normal, medium and high. Only works on 4:Tos 5:TagPriority. |
| 1.3.6.1.4.1.5205.2.34.1.17.5.2.1.9 | Columnfgs2924rQosQclQcePriority2Class | read-write | current | Specify the qce entry traffic class. Available options are: low, normal, medium and high. Only works on 4:Tos 5:TagPriority. |
| 1.3.6.1.4.1.5205.2.34.1.17.5.2.1.10 | Columnfgs2924rQosQclQcePriority3Class | read-write | current | Specify the qce entry traffic class. Available options are: low, normal, medium and high. Only works on 4:Tos 5:TagPriority. |
| 1.3.6.1.4.1.5205.2.34.1.17.5.2.1.11 | Columnfgs2924rQosQclQcePriority4Class | read-write | current | Specify the qce entry traffic class. Available options are: low, normal, medium and high. Only works on 4:Tos 5:TagPriority. |
| 1.3.6.1.4.1.5205.2.34.1.17.5.2.1.12 | Columnfgs2924rQosQclQcePriority5Class | read-write | current | Specify the qce entry traffic class. Available options are: low, normal, medium and high. Only works on 4:Tos 5:TagPriority. |
| 1.3.6.1.4.1.5205.2.34.1.17.5.2.1.13 | Columnfgs2924rQosQclQcePriority6Class | read-write | current | Specify the qce entry traffic class. Available options are: low, normal, medium and high. Only works on 4:Tos 5:TagPriority. |
| 1.3.6.1.4.1.5205.2.34.1.17.5.2.1.14 | Columnfgs2924rQosQclQcePriority7Class | read-write | current | Specify the qce entry traffic class. Available options are: low, normal, medium and high. Only works on 4:Tos 5:TagPriority. |
| 1.3.6.1.4.1.5205.2.34.1.17.5.2.1.15 | Columnfgs2924rQosQclQceEntryAction | read-write | current | Set qce entry state. 1:active 2:notInService or edit 3:delete |
| 1.3.6.1.4.1.5205.2.34.1.18 | Nodefgs2924rAclInfo | |||
| 1.3.6.1.4.1.5205.2.34.1.18.1 | Tablefgs2924rAclPortsConfTable | not-accessible | current | This is a list of port configuration entry. |
| 1.3.6.1.4.1.5205.2.34.1.18.1.1 | Rowfgs2924rAclPortsConfEntry | not-accessible | current | This is the Entry(s) for ACL port information. |
| 1.3.6.1.4.1.5205.2.34.1.18.1.1.1 | Columnfgs2924rAclPortsConfIndex | not-accessible | current | This is the port number of the ACL port entry. |
| 1.3.6.1.4.1.5205.2.34.1.18.1.1.2 | Columnfgs2924rAclPortsConfPolicyId | read-write | current | This is the policy id of the ACL port entry.(1-8) |
| 1.3.6.1.4.1.5205.2.34.1.18.1.1.3 | Columnfgs2924rAclPortsConfAction | read-write | current | Set the action of the ACL port entry. 0 - Deny 1 - Permit |
| 1.3.6.1.4.1.5205.2.34.1.18.1.1.4 | Columnfgs2924rAclPortsConfRateLimiterId | read-write | current | Set the rate limiter id of the ACL port entry.(1-16) 0 - Disable |
| 1.3.6.1.4.1.5205.2.34.1.18.1.1.5 | Columnfgs2924rAclPortsConfPortCopy | read-write | current | Set the mirror port of the ACL port entry.(1-24) 0 - Disable |
| 1.3.6.1.4.1.5205.2.34.1.18.1.1.6 | Columnfgs2924rAclPortsConfCounter | read-only | current | This is the port counter of the ACL port entry. |
| 1.3.6.1.4.1.5205.2.34.1.18.2 | Nodefgs2924rAclRateLimiter | |||
| 1.3.6.1.4.1.5205.2.34.1.18.2.1 | Tablefgs2924rAclRateLimiterTable | not-accessible | current | This is a list of FGS2924RRateLimiterEntry. |
| 1.3.6.1.4.1.5205.2.34.1.18.2.1.1 | Rowfgs2924rAclRateLimiterEntry | not-accessible | current | This is the Entry(s) for rate limiter information. |
| 1.3.6.1.4.1.5205.2.34.1.18.2.1.1.1 | Columnfgs2924rAclRateLimiterIndex | not-accessible | current | This is the index of the rate limiter entry. |
| 1.3.6.1.4.1.5205.2.34.1.18.2.1.1.2 | Columnfgs2924rAclRateLimiterRate | read-write | current | Set acl rate limite. (pps) 1 | 2 | 4 | 8 | 16 | 32 | 64 | 128 | 256 | 512 | 1k | 2k | 4k | 8k | 16k | 32k |64k | 128k | 256k | 512k | 1024k |
| 1.3.6.1.4.1.5205.2.34.1.18.3 | Tablefgs2924rAclInfoViewTable | not-accessible | current | This is a list of FGS2924RAclInfoViewEntry. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1 | Rowfgs2924rAclInfoViewEntry | not-accessible | current | Show acl entry information. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.1 | Columnfgs2924rAclInfoViewNo | not-accessible | current | Index of the ACL entry. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.2 | Columnfgs2924rAceIngressPort | read-only | current | Ace ingress port number. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.3 | Columnfgs2924rAceFrameType | read-only | current | Ace frame type. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.4 | Columnfgs2924rAceAction | read-only | current | Ace action. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.5 | Columnfgs2924rAceRateLimiter | read-only | current | Ace rate limiter number. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.6 | Columnfgs2924rAcePortCopy | read-only | current | Specify the port which packet will be copied to. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.7 | Columnfgs2924rAceCounter | read-only | current | Display the number of packets hit this ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.8 | Columnfgs2924rSmacFilter | read-only | current | Display the source mac field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.9 | Columnfgs2924rDmacFilter | read-only | current | Display the destination mac field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.10 | Columnfgs2924rVlanIdFilter | read-only | current | Display the vid field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.11 | Columnfgs2924rVlanTagPriority | read-only | current | Display the vlan tag priority field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.12 | Columnfgs2924rEtherTypeFilter | read-only | current | Display the ether type field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.13 | Columnfgs2924rArpRarp | read-only | current | Display the arp and rarp field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.14 | Columnfgs2924rArpRequestReply | read-only | current | Display the arp-request and arp-replay field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.15 | Columnfgs2924rArpSenderIpFilter | read-only | current | Display the arp sender ip filter field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.16 | Columnfgs2924rArpSenderIpAddress | read-only | current | Display the arp sender ip address field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.17 | Columnfgs2924rArpSenderIpMask | read-only | current | Display the arp sender ip mask field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.18 | Columnfgs2924rArpTargetIpFilter | read-only | current | Display the arp target ip filter field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.19 | Columnfgs2924rArpTargetIpAddress | read-only | current | Display the arp target ip address field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.20 | Columnfgs2924rArpTargetIpMask | read-only | current | Display the arp target ip mask field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.21 | Columnfgs2924rArpSmacMatch | read-only | current | Display the arp smac match field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.22 | Columnfgs2924rArpRarpDmacMatch | read-only | current | Display the rarp dmac match field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.23 | Columnfgs2924rArpIpEthernetLength | read-only | current | Display the rarp ethernet length field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.24 | Columnfgs2924rArpIp | read-only | current | Display the arp ip field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.25 | Columnfgs2924rArpEthernet | read-only | current | Display the arp ethernet field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.26 | Columnfgs2924rIpProtocolFilter | read-only | current | Display the ip protocol filter field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.27 | Columnfgs2924rIpProtocolValue | read-only | current | Display the ip protocol value field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.28 | Columnfgs2924rIpTTL | read-only | current | Display the ip ttl field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.29 | Columnfgs2924rIpFragment | read-only | current | Display the ip fragment field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.30 | Columnfgs2924rIpOption | read-only | current | Display the ip option field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.31 | Columnfgs2924rSipFilter | read-only | current | Display the sip filter field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.32 | Columnfgs2924rSipAddress | read-only | current | Display the sip address field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.33 | Columnfgs2924rSipMask | read-only | current | Display the sip mask field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.34 | Columnfgs2924rDipFilter | read-only | current | Display the dip filter field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.35 | Columnfgs2924rDipAddress | read-only | current | Display the dip address field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.36 | Columnfgs2924rDipMask | read-only | current | Display the dip mask field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.37 | Columnfgs2924rIcmpTypeFilter | read-only | current | Display the icmp type field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.38 | Columnfgs2924rIcmpCodeFilter | read-only | current | Display the icmp code field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.39 | Columnfgs2924rUdpSourcePortFilter | read-only | current | Display the udp source port field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.40 | Columnfgs2924rUdpDestPortFilter | read-only | current | Display the udp destination port field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.41 | Columnfgs2924rTcpSourcePortFilter | read-only | current | Display the tcp source port field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.42 | Columnfgs2924rTcpDestPortFilter | read-only | current | Display the tcp destination port field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.43 | Columnfgs2924rTcpFIN | read-only | current | Display the tcp fin field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.44 | Columnfgs2924rTcpSYN | read-only | current | Display the tcp syn field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.45 | Columnfgs2924rTcpRST | read-only | current | Display the tcp rst field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.46 | Columnfgs2924rTcpPSH | read-only | current | Display the tcp psh field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.47 | Columnfgs2924rTcpACK | read-only | current | Display the tcp ack field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.48 | Columnfgs2924rTcpURG | read-only | current | Display the tcp urg field of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.3.1.49 | Columnfgs2924rAclInfoEntryAction | read-write | current | 1. set the entry active / the entry is active when get state. 2. edit the specific entry. 3. delete the specific entry. 4. undo. free the buffer. |
| 1.3.6.1.4.1.5205.2.34.1.18.4 | Nodefgs2924rAclInfoConf | |||
| 1.3.6.1.4.1.5205.2.34.1.18.4.1 | Scalarfgs2924rAceNo | read-write | current | set 1 will create an ACL entry for edit, and return the entry index. others will return 0. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.2 | Scalarfgs2924rAceMoveTo | read-write | current | Move the ace entry. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.3 | Scalarfgs2924rAceIngressPortConf | read-write | current | This is the ingress port number of the ace. Available parameter: any, Policy1~8, Port1~8. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.4 | Scalarfgs2924rAceFrameTypeConf | read-write | current | This is the frame type of the ace. 0:any 1: ethernet type 2:ARP 3:Ipv4 [default:0] |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5 | Nodefgs2924rAceFrameTypeParameters | |||
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.1 | Scalarfgs2924rEthernetTypeFilter | read-write | current | This is the ethernet type of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.2 | Nodefgs2924rAclArpParameters | |||
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.2.1 | Scalarfgs2924rAceArpRarp | read-write | current | This is the arp type of the ace. 0:Any 1:Arp 2:Rarp 3:Other [default:0] |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.2.2 | Scalarfgs2924rAceArpRequestReply | read-write | current | 0:Any 1:Request 2:Reply [default:0] |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.2.3 | Scalarfgs2924rAceArpSenderIpFilter | read-write | current | 0:Any 1:Host 2:Network |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.2.4 | Scalarfgs2924rAceArpSenderIpAddress | read-write | current | This is the arp sender ip address of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.2.5 | Scalarfgs2924rAceArpSenderIpMask | read-write | current | This is the arp sender ip mask of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.2.6 | Scalarfgs2924rAceArpTargetIpFilter | read-write | current | 0:Any 1:Host 2:Network |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.2.7 | Scalarfgs2924rAceArpTargetIpAddress | read-write | current | 0:Any 1:Host 2:Network |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.2.8 | Scalarfgs2924rAceArpTargetIpMask | read-write | current | This is the arp target ip address of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.2.9 | Scalarfgs2924rAceArpSmacMatch | read-write | current | any / 0 / 1 |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.2.10 | Scalarfgs2924rAceArpRarpDmacMatch | read-write | current | any / 0 / 1 |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.2.11 | Scalarfgs2924rAceArpIpEthernetLength | read-write | current | any / 0 / 1 |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.2.12 | Scalarfgs2924rAceArpIp | read-write | current | any / 0 / 1 |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.2.13 | Scalarfgs2924rAceArpEthernet | read-write | current | any / 0 / 1 |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3 | Nodefgs2924rAclIpParameters | |||
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.1 | Scalarfgs2924rAceIpProtocolFilter | read-write | current | This is the ip protocol of the ace. 0:Any 1:ICMP 2:UDP 3:TCP 4:Other |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.2 | Nodefgs2924rAceIpProtocolFilterParameters | |||
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.2.1 | Nodefgs2924rAceIcmpParameters | |||
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.2.1.1 | Scalarfgs2924rAceIcmpTypeFilter | read-write | current | This is the icmp type filter of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.2.1.2 | Scalarfgs2924rAceIcmpCodeFilter | read-write | current | This is the icmp code filter of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.2.2 | Nodefgs2924rAceUdpParameters | |||
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.2.2.1 | Scalarfgs2924rUdpSourcePortFilterConf | read-write | current | This is the udp source port of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.2.2.2 | Scalarfgs2924rUdpDestPortFilterConf | read-write | current | This is the udp destination port of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.2.3 | Nodefgs2924rAceTcpParameters | |||
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.2.3.1 | Scalarfgs2924rTcpSourcePortFilterConf | read-write | current | This is the tcp source port of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.2.3.2 | Scalarfgs2924rTcpDestPortFilterConf | read-write | current | This is the tcp destination port of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.2.3.3 | Scalarfgs2924rTcpFINConf | read-write | current | This is the tcp fin of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.2.3.4 | Scalarfgs2924rTcpSYNConf | read-write | current | This is the tcp syn of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.2.3.5 | Scalarfgs2924rTcpRSTConf | read-write | current | This is the tcp rst of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.2.3.6 | Scalarfgs2924rTcpPSHConf | read-write | current | This is the tcp psh of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.2.3.7 | Scalarfgs2924rTcpACKConf | read-write | current | This is the tcp ack of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.2.3.8 | Scalarfgs2924rTcpURGConf | read-write | current | This is the tcp urg of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.3 | Scalarfgs2924rAceIpProtocolValue | read-write | current | This is the tcp protocol value of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.4 | Scalarfgs2924rAceIpTTL | read-write | current | Any / Zero / Non-zero |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.5 | Scalarfgs2924rAceIpFragment | read-write | current | Any/ Yes / No |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.6 | Scalarfgs2924rAceIpOption | read-write | current | Any/ Yes / No |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.7 | Scalarfgs2924rAceSipFilter | read-write | current | 0:Any 1:Host 2:Network |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.8 | Scalarfgs2924rAceSipAddress | read-write | current | This is the source ip address of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.9 | Scalarfgs2924rAceSipMask | read-write | current | This is the source ip mask of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.10 | Scalarfgs2924rAceDipFilter | read-write | current | 0:Any 1:Host 2:Network |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.11 | Scalarfgs2924rAceDipAddress | read-write | current | This is the destination ip address of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.5.3.12 | Scalarfgs2924rAceDipMask | read-write | current | This is the destination ip mask of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.6 | Scalarfgs2924rAceActionConf | read-write | current | 0:Deny 1:Permit [default:1] |
| 1.3.6.1.4.1.5205.2.34.1.18.4.7 | Scalarfgs2924rAceRateLimiterConf | read-write | current | Specify a rate limiter which is available from 0 to 16(0 means disable) for an ACE. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.8 | Scalarfgs2924rAcePortCopyConf | read-write | current | Packets will be copied to this port if hit this ACE rule. Port number is available from 0 to 24(0 means disable). |
| 1.3.6.1.4.1.5205.2.34.1.18.4.9 | Nodefgs2924rAceMacParameters | |||
| 1.3.6.1.4.1.5205.2.34.1.18.4.9.1 | Scalarfgs2924rAceSmacFilter | read-write | current | This is the source mac of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.9.2 | Scalarfgs2924rAceDmacFilter | read-write | current | This is the destination mac of the ace. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.10 | Nodefgs2924rAceVlanParameters | |||
| 1.3.6.1.4.1.5205.2.34.1.18.4.10.1 | Scalarfgs2924rAceVlanIdFilter | read-write | current | Specify the VID for the ACE. Available parameter: any, 1~4094. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.10.2 | Scalarfgs2924rAceTagPriority | read-write | current | Specify the tag priority for the ACE. Available parameter: any, 0~7. |
| 1.3.6.1.4.1.5205.2.34.1.18.4.11 | Scalarfgs2924rAceInfoEntryAction | read-write | current | 1:active 2:notInService 3:delete 4:Undo |
| 1.3.6.1.4.1.5205.2.34.1.19 | Nodefgs2924rIpMacBind | |||
| 1.3.6.1.4.1.5205.2.34.1.19.1 | Nodefgs2924rIpMacBindConf | |||
| 1.3.6.1.4.1.5205.2.34.1.19.1.1 | Scalarfgs2924rIpMacBindstate | read-write | current | Set ip mac binding state. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.34.1.19.1.2 | Scalarfgs2924rIpMacBindTrustPort | read-write | current | Set trustport, Port range : 1,5-7, available from 1 to 24 |
| 1.3.6.1.4.1.5205.2.34.1.19.2 | Nodefgs2924rIpMacBindSetting | |||
| 1.3.6.1.4.1.5205.2.34.1.19.2.1 | Scalarfgs2924rIpMacBindSettingNumber | read-write | current | Get the amount of ip_mac_binding entry. |
| 1.3.6.1.4.1.5205.2.34.1.19.2.2 | Scalarfgs2924rIpMacBindSettingEntryCreate | read-write | current | Create ip_mac_binding entry. 0: none 1: creat a entry. |
| 1.3.6.1.4.1.5205.2.34.1.19.2.3 | Tablefgs2924rIpMacBindSettingTable | not-accessible | current | This is a list of FGS2924RIpMacBindSettingEntry. |
| 1.3.6.1.4.1.5205.2.34.1.19.2.3.1 | Rowfgs2924rIpMacBindSettingEntry | not-accessible | current | This is the entry of the ip_mac_binding information. |
| 1.3.6.1.4.1.5205.2.34.1.19.2.3.1.1 | Columnfgs2924rIpMacBindSettingIndex | not-accessible | current | This is the index of the ip_mac_binding entry. |
| 1.3.6.1.4.1.5205.2.34.1.19.2.3.1.2 | Columnfgs2924rIpMacBindSettingMAC | read-write | current | This is the mac address of the ip_mac_binding entry. |
| 1.3.6.1.4.1.5205.2.34.1.19.2.3.1.3 | Columnfgs2924rIpMacBindSettingIP | read-write | current | This is the ip address of the ip_mac_binding entry. |
| 1.3.6.1.4.1.5205.2.34.1.19.2.3.1.4 | Columnfgs2924rIpMacBindSettingPort | read-write | current | This is the port number of the ip_mac_binding entry. |
| 1.3.6.1.4.1.5205.2.34.1.19.2.3.1.5 | Columnfgs2924rIpMacBindSettingVID | read-write | current | This is the vid of the ip_mac_binding entry. |
| 1.3.6.1.4.1.5205.2.34.1.19.2.3.1.6 | Columnfgs2924rIpMacBindSettingEntryAction | read-write | current | This is the action of the ip_mac_binding entry. 1 - active 2 - notInService 3 - delete |
| 1.3.6.1.4.1.5205.2.34.1.20 | Nodefgs2924rTrapEntry | |||
| 1.3.6.1.4.1.5205.2.34.1.20.1 | Notificationfgs2924rUserLogin | current | Send the trap when one user logins the system. | |
| 1.3.6.1.4.1.5205.2.34.1.20.2 | Notificationfgs2924rUserLogout | current | Send the trap when one user logouts the system. | |
| 1.3.6.1.4.1.5205.2.34.1.20.3 | Notificationfgs2924rModuleInserted | current | Send the trap when a module is inserted to the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.34.1.20.4 | Notificationfgs2924rModuleRemoved | current | Send the trap when a module is removed from the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.34.1.20.5 | Notificationfgs2924rDualMediaSwapped | current | Send the trap when the dual media port changed. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.34.1.20.6 | Notificationfgs2924rLoopDetected | current | Send the trap when loop condition has been detected. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.34.1.20.7 | Notificationfgs2924rStpStateDisabled | current | Send the trap when the operational state of STP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.34.1.20.8 | Notificationfgs2924rStpStateEnabled | current | Send the trap when the operational state of STP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.34.1.20.9 | Notificationfgs2924rStpTopologyChanged | current | Send the trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces … | |
| 1.3.6.1.4.1.5205.2.34.1.20.10 | Notificationfgs2924rLacpStateDisabled | current | Send the trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.34.1.20.11 | Notificationfgs2924rLacpStateEnabled | current | Send the trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.34.1.20.12 | Notificationfgs2924rLacpPortAdded | current | Send the trap when the state of port is in 'trunk ready'. | |
| 1.3.6.1.4.1.5205.2.34.1.20.13 | Notificationfgs2924rLacpPortTrunkFailure | current | Send the trap when one port is not able to be aggregated due to duplex-mode of the port. | |
| 1.3.6.1.4.1.5205.2.34.1.20.14 | Notificationfgs2924rGvrpStateDisabled | current | Send the trap when the operational state of GVRP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.34.1.20.15 | Notificationfgs2924rGvrpStateEnabled | current | Send the trap when the operational state of LACP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.34.1.20.17 | Notificationfgs2924rVlanPortBaseEnabled | current | Send the trap when the operational state of vlan is changed to port-based vlan. | |
| 1.3.6.1.4.1.5205.2.34.1.20.18 | Notificationfgs2924rVlanTagBaseEnabled | current | Send the trap when the operational state of vlan is changed to tag-based vlan. | |
| 1.3.6.1.4.1.5205.2.34.1.20.19 | Notificationfgs2924rIpmbStateEnabled | current | Send trap when ip_mac_binding is enabled. | |
| 1.3.6.1.4.1.5205.2.34.1.20.20 | Notificationfgs2924rIpmbStateDisabled | current | Send trap when ip_mac_binding is disabled. | |
| 1.3.6.1.4.1.5205.2.34.1.20.21 | Notificationfgs2924rIpmbEntryFailure | current | Send trap when ip_mac_binding entry is not exist. | |
| 1.3.6.1.4.1.5205.2.34.1.21 | Nodefgs2924rTrapVariable | |||
| 1.3.6.1.4.1.5205.2.34.1.21.1 | Scalarusername | read-only | current | System account name. |
| 1.3.6.1.4.1.5205.2.34.1.21.2 | ScalargroupId | read-only | current | The Trunk group ID of LACP. |
| 1.3.6.1.4.1.5205.2.34.1.21.3 | Scalaractorkey | read-only | current | This is the actor key information for LACP. |
| 1.3.6.1.4.1.5205.2.34.1.21.4 | Scalarpartnerkey | read-only | current | This is the partner key information for LACP. |
| 1.3.6.1.4.1.5205.2.34.1.21.6 | Scalarswapto | read-only | current | A notification for dual port changes media type. |
| 1.3.6.1.4.1.5205.2.34.1.21.7 | ScalaripmacIp | read-only | current | IP address of the ip_mac_binding entry. |
| 1.3.6.1.4.1.5205.2.34.1.21.8 | ScalaripmacMac | read-only | current | MAC address of the ip_mac_binding entry. |
| 1.3.6.1.4.1.5205.2.34.1.23 | Nodefgs2924rDot1X | |||
| 1.3.6.1.4.1.5205.2.34.1.23.1 | Nodefgs2924rDot1XServerConf | |||
| 1.3.6.1.4.1.5205.2.34.1.23.1.1 | Scalarfgs2924rDot1XServerConfAuthenticationServerIp | read-write | current | Get/Set authentication server ip |
| 1.3.6.1.4.1.5205.2.34.1.23.1.2 | Scalarfgs2924rDot1XServerConfAuthenticationUdpPort | read-write | current | Get/Set IEEE 802.1X authentication UDP port number |
| 1.3.6.1.4.1.5205.2.34.1.23.1.3 | Scalarfgs2924rDot1XServerConfAuthenticationServerIp2 | read-write | current | Get/Set authentication server ip 2 |
| 1.3.6.1.4.1.5205.2.34.1.23.1.4 | Scalarfgs2924rDot1XServerConfAuthenticationUdpPort2 | read-write | current | Get/Set IEEE 802.1X authentication UDP port number |
| 1.3.6.1.4.1.5205.2.34.1.23.1.5 | Scalarfgs2924rDot1XServerConfAuthenticationSecretKey | read-write | current | Get/Set IEEE 802.1X authentication secret key |
| 1.3.6.1.4.1.5205.2.34.1.23.1.6 | Scalarfgs2924rDot1XServerConfAccountingServerIp | read-write | current | Get/Set IEEE 802.1X accounting service IP |
| 1.3.6.1.4.1.5205.2.34.1.23.1.7 | Scalarfgs2924rDot1XServerConfAccountingUdpPort | read-write | current | Get/Set IEEE 802.1X accounting UDP port number |
| 1.3.6.1.4.1.5205.2.34.1.23.1.8 | Scalarfgs2924rDot1XServerConfAccountingServerIp2 | read-write | current | Get/Set IEEE 802.1X accounting service IP 2 |
| 1.3.6.1.4.1.5205.2.34.1.23.1.9 | Scalarfgs2924rDot1XServerConfAccountingUdpPort2 | read-write | current | Get/Set IEEE 802.1X accounting UDP port number |
| 1.3.6.1.4.1.5205.2.34.1.23.1.10 | Scalarfgs2924rDot1XServerConfAccountingSecretKey | read-write | current | Get/Set IEEE 802.1X accounting secret key |
| 1.3.6.1.4.1.5205.2.34.1.23.2 | Tablefgs2924rDot1XPortConfTable | not-accessible | current | A table that contains the configuration objects for the Authenticator PAE associated with each port. |
| 1.3.6.1.4.1.5205.2.34.1.23.2.1 | Rowfgs2924rDot1XPortConfEntry | not-accessible | current | The configuration information for an Authenticator PAE. |
| 1.3.6.1.4.1.5205.2.34.1.23.2.1.1 | Columnfgs2924rDot1XPort | read-write | current | The port index of 802.1X port configuration table. |
| 1.3.6.1.4.1.5205.2.34.1.23.2.1.2 | Columnfgs2924rDot1XPortMode | read-write | current | Get/Set IEEE 802.1X port mode. 0 - Disable 1 - Normal 2 - Advanced 3 - Clientless 4 - Auto |
| 1.3.6.1.4.1.5205.2.34.1.23.2.1.3 | Columnfgs2924rDot1XPortControl | read-write | current | The current value of the controlled Port control parameter of the Port. 0 : ForceUnauthorized, 1 : ForceAuthorized, 2 : Auto |
| 1.3.6.1.4.1.5205.2.34.1.23.2.1.4 | Columnfgs2924rDot1XPortreAuthMax | read-write | current | The value of the reAuthMax constant currently in use by the Authenticator PAE state machine. Value : 1-10. |
| 1.3.6.1.4.1.5205.2.34.1.23.2.1.5 | Columnfgs2924rDot1XPorttxPeriod | read-write | current | The value, in seconds, of the txPeriod constant currently in use by the Authenticator PAE state machine. Value : 1-65535. |
| 1.3.6.1.4.1.5205.2.34.1.23.2.1.6 | Columnfgs2924rDot1XPortquietPeriod | read-write | current | The value, in seconds, of the quietPeriod constant currently in use by the Authenticator PAE state machine. Value : 0-65535. |
| 1.3.6.1.4.1.5205.2.34.1.23.2.1.7 | Columnfgs2924rDot1XPortreAuthEnabled | read-write | current | The enable/disable control used by the Reauthentication Timer state machine. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.34.1.23.2.1.8 | Columnfgs2924rDot1XPortreAuthPeriod | read-write | current | The value(1..65535), in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine. |
| 1.3.6.1.4.1.5205.2.34.1.23.2.1.9 | Columnfgs2924rDot1XPortmaxReq | read-write | current | The value(1..10) of the maxReq constant currently in use by the Backend Authentication state machine. |
| 1.3.6.1.4.1.5205.2.34.1.23.2.1.10 | Columnfgs2924rDot1XPortsuppTimeout | read-write | current | The value(1..255), in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine. |
| 1.3.6.1.4.1.5205.2.34.1.23.2.1.11 | Columnfgs2924rDot1XPortserverTimeout | read-write | current | The value(1..255), in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine. |
| 1.3.6.1.4.1.5205.2.34.1.23.2.1.12 | Columnfgs2924rDot1XPortVlanAssignment | read-write | current | Get/Set IEEE 802.1X's VlanAssignment mode. 0 - Disable 1 - Enable |
| 1.3.6.1.4.1.5205.2.34.1.23.2.1.13 | Columnfgs2924rDot1XPortGuestVlan | read-write | current | Get/Set IEEE 802.1X Guest Vlan. 0 : N/A 1~4094 : The VlanID |
| 1.3.6.1.4.1.5205.2.34.1.23.2.1.14 | Columnfgs2924rDot1XPortAuthFailedVlan | read-write | current | Get/Set IEEE 802.1X Authentication Failed Vlan. 0 : N/A 1~4094 : The VlanID |
| 1.3.6.1.4.1.5205.2.34.1.23.3 | Tablefgs2924rDot1XStatusTable | not-accessible | current | A table that contains the status objects for the Authenticator PAE associated with each port. |
| 1.3.6.1.4.1.5205.2.34.1.23.3.1 | Rowfgs2924rDot1XStatusEntry | not-accessible | current | The status information for an Authenticator PAE. |
| 1.3.6.1.4.1.5205.2.34.1.23.3.1.1 | Columnfgs2924rDot1XStatusIndex | not-accessible | current | The port index of 802.1X status table. |
| 1.3.6.1.4.1.5205.2.34.1.23.3.1.2 | Columnfgs2924rDot1XStatusMode | read-only | current | The current mode of the controlled port. |
| 1.3.6.1.4.1.5205.2.34.1.23.3.1.3 | Columnfgs2924rDot1XStatusStatus | read-only | current | The current status of the controlled port. |
| 1.3.6.1.4.1.5205.2.34.1.23.3.1.4 | Columnfgs2924rDot1XVlanPolicy | read-only | current | The current Vlan Policy of the controlled port. |
| 1.3.6.1.4.1.5205.2.34.1.23.4 | Tablefgs2924rDot1XStatisticsTable | not-accessible | current | A table that contains the statistics objects for the Authenticator PAE associated with each port. |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1 | Rowfgs2924rDot1XStatisticsEntry | not-accessible | current | The statistics information for an Authenticator PAE. |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.1 | Columnfgs2924rDot1XStatisticsIndex | not-accessible | current | The port index of the 802.1X statistics table. |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.2 | Columnfgs2924rDot1XClearCounter | read-write | current | Reset the 802.1X counter associated with this port. 0 - do nothing 1 - clear |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.3 | Columnfgs2924rDot1XAuthEntersConnecting | read-only | current | Counts the number of times that the state machine transitions to the CONNECTING state from any other state. |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.4 | Columnfgs2924rDot1XauthEapLogoffsWhileConnecting | read-only | current | Counts the number of times that the state machine transitions from CONNECTING to DISCONNECTED as a result of receiving an EAPOL-Logoff message. |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.5 | Columnfgs2924rDot1XAuthEntersAuthenticating | read-only | current | Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received… |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.6 | Columnfgs2924rDot1XAuthAuthSuccessesWhileAuthenticating | read-only | current | Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine ind… |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.7 | Columnfgs2924rDot1XAuthAuthTimeoutsWhileAuthenticating | read-only | current | Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of the Backend Authentication state machine indicati… |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.8 | Columnfgs2924rDot1XAuthAuthFailWhileAuthenticating | read-only | current | Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating a… |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.9 | Columnfgs2924rDot1XAuthAuthEapStartsWhileAuthenticating | read-only | current | Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Su… |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.10 | Columnfgs2924rDot1XAuthAuthEapLogoffWhileAuthenticating | read-only | current | Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message being received from the S… |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.11 | Columnfgs2924rDot1XAuthAuthReauthsWhileAuthenticated | read-only | current | Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request. |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.12 | Columnfgs2924rDot1XAuthAuthEapStartsWhileAuthenticated | read-only | current | Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the S… |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.13 | Columnfgs2924rDot1XAuthAuthEapLogoffWhileAuthenticated | read-only | current | Counts the number of times that the state machine transitions from AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-Logoff message being received from th… |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.14 | Columnfgs2924rDot1XBackendResponses | read-only | current | Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry… |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.15 | Columnfgs2924rDot1XBackendAccessChallenges | read-only | current | Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing … |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.16 | Columnfgs2924rDot1XBackendOtherRequestsToSupplicant | read-only | current | Counts the number of times that the state machine sends an EAP-Request packet (other than Identity, Notification, Failure or Success message) to the Supplicant… |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.17 | Columnfgs2924rDot1XBackendAuthSuccesses | read-only | current | Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transi… |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.18 | Columnfgs2924rDot1XBackendAuthFails | read-only | current | Counts the number of times that the state machine receives an EAP-Failure message from the Authentication Server (i.e., aFail becomes TRUE, causing a transitio… |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.19 | Columnfgs2924rDot1XAuthEapolFramesRx | read-only | current | The number of valid EAPOL frames of any type that have been received by this Authenticator. |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.20 | Columnfgs2924rDot1XAuthEapolFramesTx | read-only | current | The number of valid EAPOL frames of any type that have been transmitted by this Authenticator. |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.21 | Columnfgs2924rDot1XAuthEapolStartFramesRx | read-only | current | The number of EAPOL Start frames that have been received by this Authenticator. |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.22 | Columnfgs2924rDot1XAuthEapolLogoffFramesRx | read-only | current | The number of EAPOL Logoff frames that have been received by this Authenticator. |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.23 | Columnfgs2924rDot1XAuthEapolRespIdFramesRx | read-only | current | The number of EAP Resp/Id frames that have been received by this Authenticator. |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.24 | Columnfgs2924rDot1XAuthEapolRespFramesRx | read-only | current | The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator. |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.25 | Columnfgs2924rDot1XAuthEapolReqIdFramesTx | read-only | current | The number of EAP Req/Id frames that have been transmitted by this Authenticator. |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.26 | Columnfgs2924rDot1XAuthEapolReqFramesTx | read-only | current | The number of valid EAP Request frames (other than Req/Id frames) that have been transmitted by this Authenticator. |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.27 | Columnfgs2924rDot1XAuthInvalidEapolFramesRx | read-only | current | The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized. |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.28 | Columnfgs2924rDot1XAuthEapLengthErrorFramesRx | read-only | current | The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid. |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.29 | Columnfgs2924rDot1XAuthLastEapolFrameVersion | read-only | current | The protocol version number carried in the most recently received EAPOL frames. |
| 1.3.6.1.4.1.5205.2.34.1.23.4.1.30 | Columnfgs2924rDot1XAuthLastEapolFrameSource | read-only | current | The source MAC address carried in the most recently received EAPOL frames. |
| 1.3.6.1.4.1.5205.2.34.1.24 | Nodefgs2924rTrunkInfo | |||
| 1.3.6.1.4.1.5205.2.34.1.24.1 | Nodefgs2924rTrunkPort | |||
| 1.3.6.1.4.1.5205.2.34.1.24.1.1 | Tablefgs2924rTrunkPortTable | not-accessible | current | This is a list of FGS2924RTrunkPortEntry. |
| 1.3.6.1.4.1.5205.2.34.1.24.1.1.1 | Rowfgs2924rTrunkPortEntry | not-accessible | current | Entry(s) for trunk table. |
| 1.3.6.1.4.1.5205.2.34.1.24.1.1.1.1 | Columnfgs2924rTrunkPortIndex | not-accessible | current | The port index of trunk table. |
| 1.3.6.1.4.1.5205.2.34.1.24.1.1.1.2 | Columnfgs2924rTrunkPortMethod | read-write | current | The method of trunk port. 0 : None, 1 : LACP, 2 : Static. |
| 1.3.6.1.4.1.5205.2.34.1.24.1.1.1.3 | Columnfgs2924rTrunkPortGroup | read-write | current | The group(0~12) of trunk port. |
| 1.3.6.1.4.1.5205.2.34.1.24.1.1.1.4 | Columnfgs2924rTrunkPortActiveLacp | read-write | current | The active lacp mode of trunk port. 0 : Passive, 1 : Active. |
| 1.3.6.1.4.1.5205.2.34.1.24.1.1.1.5 | Columnfgs2924rTrunkPortAggtr | read-only | current | The Aggtr of trunk port. |
| 1.3.6.1.4.1.5205.2.34.1.24.1.1.1.6 | Columnfgs2924rTrunkPortStatus | read-only | current | The status of trunk port. 0 : None, 1 : Ready. |
| 1.3.6.1.4.1.5205.2.34.1.24.1.1.1.7 | Columnfgs2924rTrunkPortCurrentMode | read-write | current | The current mode of trunk port entry. 0 : Active mode, 1 : Edit mode, 2 : Do edit. |
| 1.3.6.1.4.1.5205.2.34.1.24.2 | Nodefgs2924rAggregatorView | |||
| 1.3.6.1.4.1.5205.2.34.1.24.2.1 | Tablefgs2924rAggregatorViewTable | not-accessible | current | This is a list of FGS2924RAggregatorViewEntry. |
| 1.3.6.1.4.1.5205.2.34.1.24.2.1.1 | Rowfgs2924rAggregatorViewEntry | not-accessible | current | Entry(s) for aggregator view table. |
| 1.3.6.1.4.1.5205.2.34.1.24.2.1.1.1 | Columnfgs2924rAggregatorViewIndex | not-accessible | current | The port index of aggregator view table. |
| 1.3.6.1.4.1.5205.2.34.1.24.2.1.1.2 | Columnfgs2924rAggregatorViewMethod | read-only | current | The method of aggregator view table. 0 : None, 1 : LACP, 2 : Static. |
| 1.3.6.1.4.1.5205.2.34.1.24.2.1.1.3 | Columnfgs2924rAggregatorViewMemberPorts | read-only | current | The member ports of aggregator view table. |
| 1.3.6.1.4.1.5205.2.34.1.24.2.1.1.4 | Columnfgs2924rAggregatorViewReadyPorts | read-only | current | The ready ports of aggregator view table. |
| 1.3.6.1.4.1.5205.2.34.1.24.3 | Scalarfgs2924rLacpSystemPriority | read-write | current | Set lacp system priority. (Range:1~65535) |
| 1.3.6.1.4.1.5205.2.34.1.24.4 | Nodefgs2924rAggregationHashMode | |||
| 1.3.6.1.4.1.5205.2.34.1.24.4.1 | Scalarfgs2924rHashCodeSourceMacAddress | read-write | current | Set hash mode : Source MAC Hash Enable. |
| 1.3.6.1.4.1.5205.2.34.1.24.4.2 | Scalarfgs2924rHashCodeDestinationMacAddress | read-write | current | Set hash mode : Destination MAC Hash Enable. |
| 1.3.6.1.4.1.5205.2.34.1.24.4.3 | Scalarfgs2924rHashCodeIpAddress | read-write | current | Set hash mode : IP Hash Enable. |
| 1.3.6.1.4.1.5205.2.34.1.24.4.4 | Scalarfgs2924rHashCodeTcpUdpPortNumber | read-write | current | Set hash mode : TCP/UDP Port Hash Enable. |
| 1.3.6.1.4.1.5205.2.34.1.25 | Nodefgs2924rMulticastInfo | |||
| 1.3.6.1.4.1.5205.2.34.1.25.1 | Scalarfgs2924rIGMPMode | read-write | current | Get/Set the IGMP Proxy/Snooping state. 0 - disabled. 1 - proxy. 2 - snooping. |
| 1.3.6.1.4.1.5205.2.34.1.25.2 | Nodefgs2924rIGMPGroupAllowConf | |||
| 1.3.6.1.4.1.5205.2.34.1.25.2.1 | Scalarfgs2924rIGMPGroupAllowNumber | read-only | current | Get the amount of the IGMP group allow. |
| 1.3.6.1.4.1.5205.2.34.1.25.2.2 | Scalarfgs2924rIGMPGroupAllowEntryCreate | read-write | current | Create IGMP group allow entry. |
| 1.3.6.1.4.1.5205.2.34.1.25.2.3 | Tablefgs2924rIGMPGroupAllowTable | not-accessible | current | Display IGMP group allow information. |
| 1.3.6.1.4.1.5205.2.34.1.25.2.3.1 | Rowfgs2924rIGMPGroupAllowEntry | not-accessible | current | This is the Entry(s) for IGMP Group Allow configuration information. |
| 1.3.6.1.4.1.5205.2.34.1.25.2.3.1.1 | Columnfgs2924rIGMPGroupAllowNo | not-accessible | current | The index of IGMP Group Allow table. |
| 1.3.6.1.4.1.5205.2.34.1.25.2.3.1.2 | Columnfgs2924rIGMPGroupAllowVid | read-write | current | Add group allow for this IGMP. |
| 1.3.6.1.4.1.5205.2.34.1.25.2.3.1.3 | Columnfgs2924rIGMPGroupAllowStartAddress | read-write | current | Add start address of IGMP group allow. |
| 1.3.6.1.4.1.5205.2.34.1.25.2.3.1.4 | Columnfgs2924rIGMPGroupAllowEndAddress | read-write | current | Add end address of IGMP group allow. |
| 1.3.6.1.4.1.5205.2.34.1.25.2.3.1.5 | Columnfgs2924rIGMPGroupAllowEntryAction | read-write | current | 1 - active 2 - notInService 3 - delete 4 - undo |
| 1.3.6.1.4.1.5205.2.34.1.25.3 | Nodefgs2924rIGMPProxy | |||
| 1.3.6.1.4.1.5205.2.34.1.25.3.1 | Scalarfgs2924rIgmpProxyConfGeneralQueryInterval | read-write | current | Get/Set IGMP general query interval(Unit: second). |
| 1.3.6.1.4.1.5205.2.34.1.25.3.2 | Scalarfgs2924rIgmpProxyConfGeneralQueryRepTimeout | read-write | current | Get/Set IGMP general query response timeout(Unit: second). |
| 1.3.6.1.4.1.5205.2.34.1.25.3.3 | Scalarfgs2924rIgmpProxyConfGeneralQueryMaxRepTime | read-write | current | Get/Set IGMP general query maximum response time(Unit: second). |
| 1.3.6.1.4.1.5205.2.34.1.25.3.4 | Scalarfgs2924rIgmpProxyConfLastMemberQueryCount | read-write | current | Get/Set IGMP specific query robust count. |
| 1.3.6.1.4.1.5205.2.34.1.25.3.5 | Scalarfgs2924rIgmpProxyConfLastMemberQueryInterval | read-write | current | Get/Set IGMP specific query interval(Unit: second). |
| 1.3.6.1.4.1.5205.2.34.1.25.3.6 | Scalarfgs2924rIgmpProxyConfLastMemberQueryMaxRepTime | read-write | current | Get/Set IGMP specific query maximum response time(Unit: second). |
| 1.3.6.1.4.1.5205.2.34.1.25.3.7 | Scalarfgs2924rIgmpProxyConfRouterPorts | read-write | current | Get/Set IGMP router port(s). |
| 1.3.6.1.4.1.5205.2.34.1.25.3.8 | Scalarfgs2924rIgmpProxyGroupMembershipNumber | read-write | current | Get the amount of multicast group membership. |
| 1.3.6.1.4.1.5205.2.34.1.25.3.9 | Tablefgs2924rIgmpProxyGroupMembershipTable | not-accessible | current | Get multicast group membership. |
| 1.3.6.1.4.1.5205.2.34.1.25.3.9.1 | Rowfgs2924rIgmpProxyGroupMembershipEntry | not-accessible | current | Entry(s) for Igmp Proxy Group Membership table. |
| 1.3.6.1.4.1.5205.2.34.1.25.3.9.1.1 | Columnfgs2924rIgmpProxyGroupNo | not-accessible | current | The port index of Igmp Proxy Group Membership table. |
| 1.3.6.1.4.1.5205.2.34.1.25.3.9.1.2 | Columnfgs2924rIgmpProxyGroupAddress | read-only | current | The group address of multicast group membership entry. |
| 1.3.6.1.4.1.5205.2.34.1.25.3.9.1.3 | Columnfgs2924rIgmpProxyGroupVLANId | read-only | current | The vlan id of multicast group membership entry. |
| 1.3.6.1.4.1.5205.2.34.1.25.3.9.1.4 | Columnfgs2924rIgmpProxyGroupPortMembers | read-only | current | The port member of multicast group membership entry. |
| 1.3.6.1.4.1.5205.2.34.1.25.4 | Nodefgs2924rIGMPSnooping | |||
| 1.3.6.1.4.1.5205.2.34.1.25.4.1 | Scalarfgs2924rIgmpSnoopingConfHostTimeout | read-write | current | This is the host timeout of the igmp snooping. |
| 1.3.6.1.4.1.5205.2.34.1.25.4.2 | Scalarfgs2924rIgmpSnoopingConfFastLeave | read-write | current | This is the fast-leave of the igmp snooping. |
| 1.3.6.1.4.1.5205.2.34.1.25.4.3 | Scalarfgs2924rIgmpSnoopingConfRouterPorts | read-write | current | These ports are router ports of the igmp snooping. |
| 1.3.6.1.4.1.5205.2.34.1.25.4.4 | Scalarfgs2924rIgmpSnoopingGroupMembershipNumber | read-write | current | These are groups membership of the igmp snooping. |
| 1.3.6.1.4.1.5205.2.34.1.25.4.5 | Tablefgs2924rIgmpSnoopingGroupMembershipTable | not-accessible | current | Display group menbership information. |
| 1.3.6.1.4.1.5205.2.34.1.25.4.5.1 | Rowfgs2924rIgmpSnoopingGroupMembershipEntry | not-accessible | current | Entry(s) for Igmp Snooping Group Membership table. |
| 1.3.6.1.4.1.5205.2.34.1.25.4.5.1.1 | Columnfgs2924rIgmpSnoopingGroupNo | not-accessible | current | The port index of Igmp Snooping Group Membership table. |
| 1.3.6.1.4.1.5205.2.34.1.25.4.5.1.2 | Columnfgs2924rIgmpSnoopingGroupAddress | read-only | current | This is the group address of the igmp snooping. |
| 1.3.6.1.4.1.5205.2.34.1.25.4.5.1.3 | Columnfgs2924rIgmpSnoopingGroupVLANId | read-only | current | The vlan id of igmp snooping group. |
| 1.3.6.1.4.1.5205.2.34.1.25.4.5.1.4 | Columnfgs2924rIgmpSnoopingGroupPortMembers | read-only | current | The members of igmp snooping group. |
| 1.3.6.1.4.1.5205.2.34.1.25.5 | Nodefgs2924rMVR | |||
| 1.3.6.1.4.1.5205.2.34.1.25.5.1 | Scalarfgs2924rMVRMode | read-write | current | Get/Set the MVR state. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.2 | Scalarfgs2924rMVRConfHostTimeout | read-write | current | This is the host timeout of the mvr. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.3 | Scalarfgs2924rMVRConfFastLeave | read-write | current | This is the fast-leave of the mvr. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.4 | Nodefgs2924rMVIDConf | |||
| 1.3.6.1.4.1.5205.2.34.1.25.5.4.1 | Scalarfgs2924rMVIDNumber | read-only | current | The vid of mvr group. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.4.2 | Scalarfgs2924rMVIDEntryCreate | read-write | current | Create mvr group entry. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.4.3 | Tablefgs2924rMVIDGroupTable | not-accessible | current | Display mvid group information. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.4.3.1 | Rowfgs2924rMVIDGroupEntry | not-accessible | current | This is the Entry(s) for MVID Group configuration information. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.4.3.1.1 | Columnfgs2924rMVID | not-accessible | current | This is the index of the MVID Group configuration entry. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.4.3.1.2 | Columnfgs2924rMVIDMemberPort | read-write | current | Member ports of the mvid group. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.4.3.1.3 | Columnfgs2924rMVIDRouterPorts | read-write | current | Router ports of the mvid group. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.4.3.1.4 | Columnfgs2924rMVIDEntryAction | read-write | current | 1 - active 2 - notInService 3 - delete 4 - undo |
| 1.3.6.1.4.1.5205.2.34.1.25.5.5 | Nodefgs2924rMVIDGroupAllowConf | |||
| 1.3.6.1.4.1.5205.2.34.1.25.5.5.1 | Scalarfgs2924rMVIDGroupAllowNumber | read-only | current | Get the amount of the mvid group allow. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.5.2 | Scalarfgs2924rMVIDGroupAllowEntryCreate | read-write | current | Create mvid group allow entry. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.5.3 | Tablefgs2924rMVIDGroupAllowTable | not-accessible | current | Display mvid group allow information. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.5.3.1 | Rowfgs2924rMVIDGroupAllowEntry | not-accessible | current | This is the Entry(s) for MVID Group Allow configuration information. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.5.3.1.1 | Columnfgs2924rMVIDGroupAllowNo | not-accessible | current | The index of MVID Group Allow table. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.5.3.1.2 | Columnfgs2924rMVIDGroupAllowMvid | read-write | current | Add group allow for this mvid. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.5.3.1.3 | Columnfgs2924rMVIDGroupAllowStartAddress | read-write | current | Add start address of mvid group allow. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.5.3.1.4 | Columnfgs2924rMVIDGroupAllowEndAddress | read-write | current | Add end address of mvid group allow. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.5.3.1.5 | Columnfgs2924rMVIDGroupAllowEntryAction | read-write | current | 1 - active 2 - notInService 3 - delete 4 - undo |
| 1.3.6.1.4.1.5205.2.34.1.25.5.6 | Scalarfgs2924rMVRGroupMembershipNumber | read-only | current | Get the amount of mvr group membership. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.7 | Tablefgs2924rMVRGroupMembershipTable | not-accessible | current | Get mvr group membership. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.7.1 | Rowfgs2924rMVRGroupMembershipEntry | not-accessible | current | Entry(s) for MVR Group Membership table. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.7.1.1 | Columnfgs2924rMVRGroupNo | not-accessible | current | The port index of MVR Group Membership table. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.7.1.2 | Columnfgs2924rMVRGroupAddress | read-only | current | The group address of mvr group membership entry. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.7.1.3 | Columnfgs2924rMVRGroupVLANId | read-only | current | The vlan id of mvr group membership entry. |
| 1.3.6.1.4.1.5205.2.34.1.25.5.7.1.4 | Columnfgs2924rMVRGroupPortMembers | read-only | current | The port member of mvr group membership entry. |
| 1.3.6.1.4.1.5205.2.34.1.26 | Nodefgs2924rDhcpSnooping | |||
| 1.3.6.1.4.1.5205.2.34.1.26.1 | Scalarfgs2924rDhcpSnoopingState | read-write | current | Get/Set the Dhcp Snooping state. 0 - disabled. 1 - enable. |
| 1.3.6.1.4.1.5205.2.34.1.26.2 | Nodefgs2924rDhcpSnoopingInfo | |||
| 1.3.6.1.4.1.5205.2.34.1.26.2.1 | Scalarfgs2924rDhcpSnoopingCreate | read-write | current | create DHCP Snooping entry. 0 - none. 1 - create. |
| 1.3.6.1.4.1.5205.2.34.1.26.2.2 | Tablefgs2924rDhcpSnoopingTable | not-accessible | current | This is a list of DhcpSnoopingEntry. |
| 1.3.6.1.4.1.5205.2.34.1.26.2.2.1 | Rowfgs2924rDhcpSnoopingEntry | not-accessible | current | Entry(s) for Dhcp Snooping table. |
| 1.3.6.1.4.1.5205.2.34.1.26.2.2.1.1 | Columnfgs2924rDhcpSnoopingIndex | not-accessible | current | The index of Dhcp Snooping table. |
| 1.3.6.1.4.1.5205.2.34.1.26.2.2.1.2 | Columnfgs2924rDhcpSnoopingVID | read-write | current | The vid of the dhcp snooping entry. |
| 1.3.6.1.4.1.5205.2.34.1.26.2.2.1.3 | Columnfgs2924rDhcpSnoopingTrustPort1 | read-write | current | The trust port1 of the dhcp snooping entry. 0:disable |
| 1.3.6.1.4.1.5205.2.34.1.26.2.2.1.4 | Columnfgs2924rDhcpSnoopingTrustPort2 | read-write | current | The trust port2 of the dhcp snooping entry. 0:disable |
| 1.3.6.1.4.1.5205.2.34.1.26.2.2.1.5 | Columnfgs2924rDhcpSnoopingServerIP | read-write | current | The server ip of the dhcp snooping entry. |
| 1.3.6.1.4.1.5205.2.34.1.26.2.2.1.6 | Columnfgs2924rDhcpSnoopingOption82 | read-write | current | 0:disable 1:enable |
| 1.3.6.1.4.1.5205.2.34.1.26.2.2.1.7 | Columnfgs2924rDhcpSnoopingAction | read-write | current | 0:keep 1: drop 2: replace |
| 1.3.6.1.4.1.5205.2.34.1.26.2.2.1.8 | Columnfgs2924rDhcpSnoopingEntryAction | read-write | current | The current mode of Dhcp Snooping default entry. 0 : Active mode, 1 : Edit mode, 2 : Do edit. |
| 1.3.6.1.4.1.5205.2.34.1.26.2.3 | Nodefgs2924rDhcpSnoopingDefaultData | |||
| 1.3.6.1.4.1.5205.2.34.1.26.2.3.1 | Scalarfgs2924rDhcpSnoopingDefaultVID | read-write | current | The vid of the dhcp_snooping default entry. |
| 1.3.6.1.4.1.5205.2.34.1.26.2.3.2 | Scalarfgs2924rDhcpSnoopingDefaultTrustPort1 | read-write | current | The trust port1 of the dhcp_snooping default entry. 0:disable |
| 1.3.6.1.4.1.5205.2.34.1.26.2.3.3 | Scalarfgs2924rDhcpSnoopingDefaultTrustPort2 | read-write | current | The trust port2 of the dhcp_snooping default entry. 0:disable |
| 1.3.6.1.4.1.5205.2.34.1.26.2.3.4 | Scalarfgs2924rDhcpSnoopingDefaultServerIP | read-write | current | The server ip of the dhcp_snooping default entry. |
| 1.3.6.1.4.1.5205.2.34.1.26.2.3.5 | Scalarfgs2924rDhcpSnoopingDefaultOption82 | read-write | current | 0:disable 1:enable |
| 1.3.6.1.4.1.5205.2.34.1.26.2.3.6 | Scalarfgs2924rDhcpSnoopingDefaultAction | read-write | current | 0:keep 1: drop 2: replace |
| 1.3.6.1.4.1.5205.2.34.1.26.2.3.7 | Scalarfgs2924rDhcpSnoopingDefaultEntryAction | read-write | current | The current mode of Dhcp Snooping default entry. 0 : Active mode, 1 : Edit mode, 2 : Do edit, 3 : Undo. |
| 1.3.6.1.4.1.5205.2.34.1.26.3 | Tablefgs2924rDhcpSnoopingClientTable | not-accessible | current | The list of the DhcpSnoopingClientEntry. |
| 1.3.6.1.4.1.5205.2.34.1.26.3.1 | Rowfgs2924rDhcpSnoopingClientEntry | not-accessible | current | Entry(s) for Dhcp Snooping Client table. |
| 1.3.6.1.4.1.5205.2.34.1.26.3.1.1 | Columnfgs2924rDhcpSnoopingClientIndex | not-accessible | current | The index of Dhcp Snooping Client table. |
| 1.3.6.1.4.1.5205.2.34.1.26.3.1.2 | Columnfgs2924rDhcpSnoopingClientMac | read-only | current | The mac address of the dhcp_snooping client entry. |
| 1.3.6.1.4.1.5205.2.34.1.26.3.1.3 | Columnfgs2924rDhcpSnoopingClientVID | read-only | current | The vid of the dhcp_snooping client entry. |
| 1.3.6.1.4.1.5205.2.34.1.26.3.1.4 | Columnfgs2924rDhcpSnoopingClientPort | read-only | current | The port number of the dhcp_snooping client entry. |
| 1.3.6.1.4.1.5205.2.34.1.26.3.1.5 | Columnfgs2924rDhcpSnoopingClientIP | read-only | current | The ip address of the dhcp_snooping client entry. |
| 1.3.6.1.4.1.5205.2.34.1.26.3.1.6 | Columnfgs2924rDhcpSnoopingClientLease | read-only | current | The dhcp lease time of the dhcp_snooping client entry. |