RUBYTECH-GS2108C-MIB
188 objects
The MIB module for Ruby Tech.
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5205 | Identityrubytech | The MIB module for Ruby Tech. | ||
| 1.3.6.1.4.1.5205.2 | Nodeswitch | |||
| 1.3.6.1.4.1.5205.2.18 | Nodegs2108cProductID | |||
| 1.3.6.1.4.1.5205.2.18.1 | Nodegs2108cProduces | |||
| 1.3.6.1.4.1.5205.2.18.1.1 | Nodegs2108cSystem | |||
| 1.3.6.1.4.1.5205.2.18.1.1.1 | Nodegs2108cCommonSys | |||
| 1.3.6.1.4.1.5205.2.18.1.1.1.1 | Scalargs2108cReboot | read-write | current | reboot the system. Get this oid always return zero. 0 - do nothing 1 - reboot without saving start 2 - reboot with saving start |
| 1.3.6.1.4.1.5205.2.18.1.1.1.2 | Scalargs2108cBiosVsersion | read-only | current | Get the BIOS version of the system. |
| 1.3.6.1.4.1.5205.2.18.1.1.1.3 | Scalargs2108cFirmwareVersion | read-only | current | Get the firmware version of the system. |
| 1.3.6.1.4.1.5205.2.18.1.1.1.4 | Scalargs2108cHardwareVersion | read-only | current | Get the hardware version of the system. |
| 1.3.6.1.4.1.5205.2.18.1.1.1.5 | Scalargs2108cMechanicalVersion | read-only | current | Get the mechanical version of the system. |
| 1.3.6.1.4.1.5205.2.18.1.1.1.6 | Scalargs2108cSeriesNumber | read-only | current | Get the series number of the system. |
| 1.3.6.1.4.1.5205.2.18.1.1.1.7 | Scalargs2108cHostMacAddress | read-only | current | Get the MAC address of the system. |
| 1.3.6.1.4.1.5205.2.18.1.1.1.8 | Scalargs2108cDevicePort | read-only | current | Get the quantity of ports that this system owns now. |
| 1.3.6.1.4.1.5205.2.18.1.1.1.9 | Scalargs2108cRamSize | read-only | current | Get the RAM size of the system. |
| 1.3.6.1.4.1.5205.2.18.1.1.1.10 | Scalargs2108cFlashSize | read-only | current | Get the flash size of the system. |
| 1.3.6.1.4.1.5205.2.18.1.1.2 | Nodegs2108cIP | |||
| 1.3.6.1.4.1.5205.2.18.1.1.2.1 | Scalargs2108cDhcpSetting | read-write | current | Get/Set DHCP status of the system. 0 - DHCP disable 1 - DHCP enable |
| 1.3.6.1.4.1.5205.2.18.1.1.2.2 | Scalargs2108cIPAddress | read-write | current | Get/Set the IP address of the system. Can't Set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.18.1.1.2.3 | Scalargs2108cNetMask | read-write | current | Get/Set the netmask of the system. Can't Set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.18.1.1.2.4 | Scalargs2108cDefaultGateway | read-write | current | Get/Set the default gateway of the system. Can't Set this OID if DHCP status is enabled. |
| 1.3.6.1.4.1.5205.2.18.1.1.2.5 | Scalargs2108cDnsSetting | read-write | current | Get/Set the source of DNS server. Can't Set this OID if DHCP status is disabled. 0 - manual, the DNS server is from manaul setting 1 - auto, the DNS server is … |
| 1.3.6.1.4.1.5205.2.18.1.1.2.6 | Scalargs2108cDnsServer | read-write | current | Get/Set the DNS server of the system. |
| 1.3.6.1.4.1.5205.2.18.1.1.3 | Nodegs2108cTime | |||
| 1.3.6.1.4.1.5205.2.18.1.1.3.1 | Scalargs2108cSystemCurrentTime | read-only | current | Get the current time in the system. |
| 1.3.6.1.4.1.5205.2.18.1.1.3.2 | Scalargs2108cManualTimeSetting | read-write | current | Get/Set the system time of the device. The input format is 'Year/Month/Day/Hour/Minute/Second'. ex: 2004/1/1/12/34/25 means 2004/1/1 - 12:24:25 . value range: … |
| 1.3.6.1.4.1.5205.2.18.1.1.3.3 | Scalargs2108cNTPServer | read-write | current | Get/Set the NTP Time Server. You can use the IP address or domain name. |
| 1.3.6.1.4.1.5205.2.18.1.1.3.4 | Scalargs2108cNTPTimeZone | read-write | current | Get/Set the NTP Time Zone. value range is between -12 and 13 -12 - GMT -12:00, -11 - GMT -11:00, -10 - GMT -10:00, -9 - GMT -09:00, -8 - GMT -08:00, -7 - GMT -… |
| 1.3.6.1.4.1.5205.2.18.1.1.3.5 | Scalargs2108cNTPTimeSync | read-write | current | Sync time from NTP Server. Get this oid always return zero. Setting the Time Server and TimeZone before doing time sync. Notice that time server must be correc… |
| 1.3.6.1.4.1.5205.2.18.1.1.3.6 | Scalargs2108cDaylightSavingTime | read-write | current | Get/Set the daylight saveing time. value range is between -5 and 5. unit: hour. |
| 1.3.6.1.4.1.5205.2.18.1.1.3.7 | Scalargs2108cDaylightStartTime | read-write | current | Get/Set the Start time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 10/01… |
| 1.3.6.1.4.1.5205.2.18.1.1.3.8 | Scalargs2108cDaylightEndTime | read-write | current | Get/Set the End time of Daylight Saving. The input format is 'MM/DD/HH', and daylight saving start month can't equal end month. example: month/day/hour 04/01/0… |
| 1.3.6.1.4.1.5205.2.18.1.1.4 | Nodegs2108cAccount | |||
| 1.3.6.1.4.1.5205.2.18.1.1.4.1 | Scalargs2108cAccountNumber | read-only | current | Get the current account number(s) of the system. |
| 1.3.6.1.4.1.5205.2.18.1.1.4.2 | Tablegs2108cAccountTable | not-accessible | current | A list of GS2108CAccountEntry. The number of entries are given by the value of gs2108cAccountNumber. |
| 1.3.6.1.4.1.5205.2.18.1.1.4.2.1 | Rowgs2108cAccountEntry | not-accessible | current | Entry(s) for account informaion. |
| 1.3.6.1.4.1.5205.2.18.1.1.4.2.1.1 | Columngs2108cAccountIndex | read-only | current | The index of the account entry. |
| 1.3.6.1.4.1.5205.2.18.1.1.4.2.1.2 | Columngs2108cAccountAuthorization | read-only | current | The authorization of the account entry. |
| 1.3.6.1.4.1.5205.2.18.1.1.4.2.1.3 | Columngs2108cAccountName | read-write | current | The username of the account entry. |
| 1.3.6.1.4.1.5205.2.18.1.1.4.2.1.4 | Columngs2108cAccountPassword | read-write | current | The password of the account entry. The return value is always '********'. |
| 1.3.6.1.4.1.5205.2.18.1.1.4.3 | Scalargs2108cAccountAddName | read-write | current | The account name for adding operation. |
| 1.3.6.1.4.1.5205.2.18.1.1.4.4 | Scalargs2108cAccountAddPassword | read-write | current | The account password for adding operation. The return value is aloways '********'. |
| 1.3.6.1.4.1.5205.2.18.1.1.4.5 | Scalargs2108cDoAccountAdd | read-write | current | Add account name. OID gs2108cAccountAddName and gs2108cAccountAddPassword must be filled first. Get this oid always return zero. 1 - add account. 0 - do nothin… |
| 1.3.6.1.4.1.5205.2.18.1.1.4.6 | Scalargs2108cAccountDel | read-write | current | Delete account. The value is valid gs2108cAccountIndex(Can't delete administrator). |
| 1.3.6.1.4.1.5205.2.18.1.2 | Nodegs2108cSnmp | |||
| 1.3.6.1.4.1.5205.2.18.1.2.1 | Scalargs2108cGetCommunity | read-write | current | Get/Set the get-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.18.1.2.2 | Scalargs2108cSetCommunity | read-write | current | Get/Set the set-community of the SNMP. |
| 1.3.6.1.4.1.5205.2.18.1.2.3 | Scalargs2108cTrapHostNumber | read-only | current | Get the number of trap hosts. |
| 1.3.6.1.4.1.5205.2.18.1.2.4 | Tablegs2108cTrapHostTable | not-accessible | current | A list of trap host entry. The number of entries are given by the value of gs2108cTrapHostNumber. |
| 1.3.6.1.4.1.5205.2.18.1.2.4.1 | Rowgs2108cTrapHostEntry | not-accessible | current | Entry information for trap host. |
| 1.3.6.1.4.1.5205.2.18.1.2.4.1.1 | Columngs2108cTrapHostIndex | read-only | current | The index of the trap host entry. |
| 1.3.6.1.4.1.5205.2.18.1.2.4.1.2 | Columngs2108cTrapHostIP | read-write | current | The IP of the trap host. |
| 1.3.6.1.4.1.5205.2.18.1.2.4.1.3 | Columngs2108cTrapHostPort | read-write | current | The receiving-port number of the trap host. |
| 1.3.6.1.4.1.5205.2.18.1.2.4.1.4 | Columngs2108cTrapHostCommunity | read-write | current | The community name for the trap PDU. |
| 1.3.6.1.4.1.5205.2.18.1.3 | Nodegs2108cAlarm | |||
| 1.3.6.1.4.1.5205.2.18.1.3.1 | Nodegs2108cEvent | |||
| 1.3.6.1.4.1.5205.2.18.1.3.1.1 | Scalargs2108cEventNumber | read-only | current | Get the total number of alarm events. |
| 1.3.6.1.4.1.5205.2.18.1.3.1.2 | Tablegs2108cEventTable | not-accessible | current | A list of alarm event entry. The number of entries are given by the value of gs2108cEventNumber. |
| 1.3.6.1.4.1.5205.2.18.1.3.1.2.1 | Rowgs2108cEventEntry | not-accessible | current | Entry infomation for alarm event. |
| 1.3.6.1.4.1.5205.2.18.1.3.1.2.1.1 | Columngs2108cEventIndex | read-only | current | The index of the alarm event entry. |
| 1.3.6.1.4.1.5205.2.18.1.3.1.2.1.2 | Columngs2108cEventName | read-only | current | The alarm event name. |
| 1.3.6.1.4.1.5205.2.18.1.3.1.2.1.3 | Columngs2108cEventSendEmail | read-write | current | Send email when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.18.1.3.1.2.1.4 | Columngs2108cEventSendSMS | read-write | current | Send sms when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.18.1.3.1.2.1.5 | Columngs2108cEventSendTrap | read-write | current | Send trap when alarm event is triggered. |
| 1.3.6.1.4.1.5205.2.18.1.3.2 | Nodegs2108cEmail | |||
| 1.3.6.1.4.1.5205.2.18.1.3.2.1 | Scalargs2108cEmailServer | read-write | current | SMTP server for alarm event. |
| 1.3.6.1.4.1.5205.2.18.1.3.2.2 | Scalargs2108cEmailUsername | read-write | current | Username of smtp server. |
| 1.3.6.1.4.1.5205.2.18.1.3.2.3 | Scalargs2108cEmailPassword | read-write | current | User password of smtp server. |
| 1.3.6.1.4.1.5205.2.18.1.3.2.4 | Scalargs2108cEmailUserNumber | read-only | current | The number of the email users that you want to send the alarm notification. |
| 1.3.6.1.4.1.5205.2.18.1.3.2.5 | Tablegs2108cEmailUserTable | not-accessible | current | A list of email user entry. The number of entries are given by the value of gs2108cEmailUserNumber. |
| 1.3.6.1.4.1.5205.2.18.1.3.2.5.1 | Rowgs2108cEmailUserEntry | not-accessible | current | Entry information for email user entry. |
| 1.3.6.1.4.1.5205.2.18.1.3.2.5.1.1 | Columngs2108cEmailUserIndex | read-only | current | The index of the email user entry. |
| 1.3.6.1.4.1.5205.2.18.1.3.2.5.1.2 | Columngs2108cEmailUserAddress | read-write | current | The email address of the email user entry. |
| 1.3.6.1.4.1.5205.2.18.1.3.3 | Nodegs2108cSMS | |||
| 1.3.6.1.4.1.5205.2.18.1.3.3.1 | Scalargs2108cSMSServer | read-write | current | SMS server for alarm event. |
| 1.3.6.1.4.1.5205.2.18.1.3.3.2 | Scalargs2108cSMSUsername | read-write | current | Username of SMS server. |
| 1.3.6.1.4.1.5205.2.18.1.3.3.3 | Scalargs2108cSMSPassword | read-write | current | User password of SMS server. |
| 1.3.6.1.4.1.5205.2.18.1.3.3.4 | Scalargs2108cSMSUserNumber | read-only | current | The number of the SMS users that you want to send the alarm notification. |
| 1.3.6.1.4.1.5205.2.18.1.3.3.5 | Tablegs2108cSMSUserTable | not-accessible | current | A list of SMS user entry. The number of entries are given by the value of gs2108cSMSUserNumber. |
| 1.3.6.1.4.1.5205.2.18.1.3.3.5.1 | Rowgs2108cSMSUserEntry | not-accessible | current | Entry information for SMS user entry. |
| 1.3.6.1.4.1.5205.2.18.1.3.3.5.1.1 | Columngs2108cSMSUserIndex | read-only | current | The index of the SMS user entry. |
| 1.3.6.1.4.1.5205.2.18.1.3.3.5.1.2 | Columngs2108cSMSUserMobilePhone | read-write | current | The SMS phone number of the SMS user entry. |
| 1.3.6.1.4.1.5205.2.18.1.4 | Nodegs2108cTftp | |||
| 1.3.6.1.4.1.5205.2.18.1.4.1 | Scalargs2108cTftpServer | read-write | current | Get/Set the tftp server. |
| 1.3.6.1.4.1.5205.2.18.1.5 | Nodegs2108cConfiguration | |||
| 1.3.6.1.4.1.5205.2.18.1.5.1 | Nodegs2108cSaveRestore | |||
| 1.3.6.1.4.1.5205.2.18.1.5.1.1 | Scalargs2108cSaveStart | read-write | current | Save current configuration into flash memory (start section). Get this oid always return zero. 1 - save. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.18.1.5.1.2 | Scalargs2108cSaveUser | read-write | current | Save current configuration into flash memory (user config section). Get this oid always return zero. 1 - save. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.18.1.5.1.3 | Scalargs2108cRestoreDefault | read-write | current | Restore factory default configurtion. Get this oid always return zero. 2 - restore default included default ip address. 1 - restore default without changing cu… |
| 1.3.6.1.4.1.5205.2.18.1.5.1.4 | Scalargs2108cRestoreUser | read-write | current | Restore user configurtion. Get this oid always return zero. 1 - retore. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.18.1.5.2 | Nodegs2108cConfigFile | |||
| 1.3.6.1.4.1.5205.2.18.1.5.2.1 | Scalargs2108cExportConfigName | read-write | current | Get/Set export config file path and name. |
| 1.3.6.1.4.1.5205.2.18.1.5.2.2 | Scalargs2108cDoExportConfig | read-write | current | Do export-config. Get this oid always return zero. 1 - export start section. 2 - export user-conf section. |
| 1.3.6.1.4.1.5205.2.18.1.5.2.3 | Scalargs2108cImportConfigName | read-write | current | Get/Set export config file path and name. |
| 1.3.6.1.4.1.5205.2.18.1.5.2.4 | Scalargs2108cDoImportConfig | read-write | current | Do import-config. Get this oid always return zero. 1 - import start section. 2 - import user-conf section. |
| 1.3.6.1.4.1.5205.2.18.1.6 | Nodegs2108cDiagnostic | |||
| 1.3.6.1.4.1.5205.2.18.1.6.1 | Scalargs2108cEEPROMTest | read-only | current | EEPROM access test. |
| 1.3.6.1.4.1.5205.2.18.1.6.2 | Scalargs2108cUartTest | read-only | current | UART access test. |
| 1.3.6.1.4.1.5205.2.18.1.6.3 | Scalargs2108cDramTest | read-only | current | DRAM access test. |
| 1.3.6.1.4.1.5205.2.18.1.6.4 | Scalargs2108cFlashTest | read-only | current | Flash memory access test. |
| 1.3.6.1.4.1.5205.2.18.1.6.5 | Scalargs2108cInternalLoopbackTest | read-only | current | Internel loopback test. |
| 1.3.6.1.4.1.5205.2.18.1.6.6 | Scalargs2108cExternalLoopbackTest | read-only | current | Externel loopback test. |
| 1.3.6.1.4.1.5205.2.18.1.6.7 | Scalargs2108cPingTest | read-write | current | Set the host address that you want to ping and the system will return the test result. |
| 1.3.6.1.4.1.5205.2.18.1.7 | Nodegs2108cLog | |||
| 1.3.6.1.4.1.5205.2.18.1.7.1 | Scalargs2108cClearLog | read-write | current | Clear system log. Get this oid always return zero. 1 - clear log. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.18.1.7.2 | Scalargs2108cUploadLog | read-write | current | Upload current system log. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this oid always return zero.… |
| 1.3.6.1.4.1.5205.2.18.1.7.3 | Scalargs2108cAutoUploadLogState | read-write | current | Enable log auto-upload function. Set the correct tftp server first. The format of log file is 'ModelName_SerialNumbuer_YYMMDD_HHMM'. Get this oid always return… |
| 1.3.6.1.4.1.5205.2.18.1.7.4 | Scalargs2108cLogNumber | read-only | current | Get the number of current system log. |
| 1.3.6.1.4.1.5205.2.18.1.7.5 | Tablegs2108cLogTable | not-accessible | current | A list of log entry. The number of entries are given by the value of gs2108cLogNumber. |
| 1.3.6.1.4.1.5205.2.18.1.7.5.1 | Rowgs2108cLogEntry | not-accessible | current | Entry information for system log. |
| 1.3.6.1.4.1.5205.2.18.1.7.5.1.1 | Columngs2108cLogIndex | read-only | current | The index of the log entry. |
| 1.3.6.1.4.1.5205.2.18.1.7.5.1.2 | Columngs2108cLogEvent | read-only | current | The detail information of the log entry. |
| 1.3.6.1.4.1.5205.2.18.1.8 | Nodegs2108cFirmware | |||
| 1.3.6.1.4.1.5205.2.18.1.8.1 | Scalargs2108cFirmwareFileName | read-write | current | Get/Set the path and filename for firmware upgrading. |
| 1.3.6.1.4.1.5205.2.18.1.8.2 | Scalargs2108cDoFirmwareUpgrade | read-write | current | Do firmware upgrade. Get this oid always return zero. 1 - do firmware upgrade. 0 - do nothing. |
| 1.3.6.1.4.1.5205.2.18.1.9 | Nodegs2108cPort | |||
| 1.3.6.1.4.1.5205.2.18.1.9.1 | Nodegs2108cPortStatus | |||
| 1.3.6.1.4.1.5205.2.18.1.9.1.1 | Scalargs2108cPortStatusNumber | read-only | current | Get the number of port state. |
| 1.3.6.1.4.1.5205.2.18.1.9.1.2 | Tablegs2108cPortStatusTable | not-accessible | current | A list of port status entry. The number of entries are given by the value of gs2108cPortStatusNumber. |
| 1.3.6.1.4.1.5205.2.18.1.9.1.2.1 | Rowgs2108cPortStatusEntry | not-accessible | current | Entry(s) for port status informaion. |
| 1.3.6.1.4.1.5205.2.18.1.9.1.2.1.1 | Columngs2108cPortStatusIndex | read-only | current | The index of the port status entry. |
| 1.3.6.1.4.1.5205.2.18.1.9.1.2.1.2 | Columngs2108cPortStatusMedia | read-only | current | The port media type of the port status entry. |
| 1.3.6.1.4.1.5205.2.18.1.9.1.2.1.3 | Columngs2108cPortStatusLink | read-only | current | The port link of the port status entry. |
| 1.3.6.1.4.1.5205.2.18.1.9.1.2.1.4 | Columngs2108cPortStatusPortState | read-only | current | The port state of the port status entry. |
| 1.3.6.1.4.1.5205.2.18.1.9.1.2.1.5 | Columngs2108cPortStatusAutoNego | read-only | current | The auto negotiation of the port status entry. |
| 1.3.6.1.4.1.5205.2.18.1.9.1.2.1.6 | Columngs2108cPortStatusSpdDpx | read-only | current | The speed/duplex of the port status entry. |
| 1.3.6.1.4.1.5205.2.18.1.9.1.2.1.7 | Columngs2108cPortStatusFlwCtrl | read-only | current | The flow control of the port status entry. |
| 1.3.6.1.4.1.5205.2.18.1.9.1.2.1.8 | Columngs2108cPortStatusWaitState | read-only | current | The wait state of the port status entry. |
| 1.3.6.1.4.1.5205.2.18.1.9.2 | Nodegs2108cPortConf | |||
| 1.3.6.1.4.1.5205.2.18.1.9.2.1 | Scalargs2108cPortConfNumber | read-only | current | Get the number of port configuration. |
| 1.3.6.1.4.1.5205.2.18.1.9.2.2 | Tablegs2108cPortConfTable | not-accessible | current | A list of port configuration entry. The number of entries are given by the value of gs2108cPortConfNumber. |
| 1.3.6.1.4.1.5205.2.18.1.9.2.2.1 | Rowgs2108cPortConfEntry | not-accessible | current | Entry(s) for port configuration informaion. |
| 1.3.6.1.4.1.5205.2.18.1.9.2.2.1.1 | Columngs2108cPortConfIndex | read-only | current | The index of the port configuration entry. |
| 1.3.6.1.4.1.5205.2.18.1.9.2.2.1.2 | Columngs2108cPortConfPortState | read-write | current | The port state of the port configuration entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.18.1.9.2.2.1.3 | Columngs2108cPortConfSpdDpx | read-write | current | The speed/duplex of the port configuration entry. 0 - auto. 1 - 10M/Half. 2 - 10M/Full. 3 - 100M/Half. 4 - 100M/Full. 5 - 1G/Full. |
| 1.3.6.1.4.1.5205.2.18.1.9.2.2.1.4 | Columngs2108cPortConfFlwCtrl | read-write | current | The flow control of the port configuration entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.18.1.9.2.2.1.5 | Columngs2108cPortConfWaitState | read-write | current | The wait state of the port configuration entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.18.1.10 | Nodegs2108cMirror | |||
| 1.3.6.1.4.1.5205.2.18.1.10.1 | Scalargs2108cMirrorMode | read-write | current | Get/Set the Mirror mode. 0 - disabled. 1 - enable. |
| 1.3.6.1.4.1.5205.2.18.1.10.2 | Scalargs2108cMirroringPort | read-write | current | Get/Set the mirroring port. The port range from 1 to 8. |
| 1.3.6.1.4.1.5205.2.18.1.10.3 | Scalargs2108cMirroredPorts | read-write | current | Get/Set the monitored ports. The port range from 1 to 8, and the syntax is 1,5-7. |
| 1.3.6.1.4.1.5205.2.18.1.11 | Nodegs2108cMaxPktLen | |||
| 1.3.6.1.4.1.5205.2.18.1.11.1 | Nodegs2108cMaxPktLen1 | |||
| 1.3.6.1.4.1.5205.2.18.1.11.1.1 | Scalargs2108cMaxPktLenPortNumber | read-only | current | Get the number of Max. packet length. |
| 1.3.6.1.4.1.5205.2.18.1.11.1.2 | Tablegs2108cMaxPktLenConfTable | not-accessible | current | A list of Max. packet length entry. The number of entries are given by the value of gs2108cMaxPktLenPortNumber. |
| 1.3.6.1.4.1.5205.2.18.1.11.1.2.1 | Rowgs2108cMaxPktLenConfEntry | not-accessible | current | Entry(s) for Max. packet length informaion. |
| 1.3.6.1.4.1.5205.2.18.1.11.1.2.1.1 | Columngs2108cMaxPktLenConfIndex | read-only | current | The index of the Max. packet length entry. |
| 1.3.6.1.4.1.5205.2.18.1.11.1.2.1.2 | Columngs2108cMaxPktLenConfSetting | read-write | current | Get/Set the Max. packet length. The Max. packet length is 1518,1532,or 9216. |
| 1.3.6.1.4.1.5205.2.18.1.12 | Nodegs2108cBandwidth | |||
| 1.3.6.1.4.1.5205.2.18.1.12.1 | Nodegs2108cBandwidth1 | |||
| 1.3.6.1.4.1.5205.2.18.1.12.1.1 | Scalargs2108cBandwidthPortNumber | read-only | current | Get the number of bandwidth management configuration. |
| 1.3.6.1.4.1.5205.2.18.1.12.1.2 | Tablegs2108cBandwidthConfTable | not-accessible | current | A list of bandwidth management configuration entry. The number of entries are given by the value of gs2108cBandwidthPortNumber. |
| 1.3.6.1.4.1.5205.2.18.1.12.1.2.1 | Rowgs2108cBandwidthConfEntry | not-accessible | current | Entry(s) for bandwidth management configuration informaion. |
| 1.3.6.1.4.1.5205.2.18.1.12.1.2.1.1 | Columngs2108cBandwidthConfIndex | read-only | current | The index of the bandwidth management configuration entry. |
| 1.3.6.1.4.1.5205.2.18.1.12.1.2.1.2 | Columngs2108cBandwidthConfIgressState | read-write | current | The igress state of the bandwidth management configurateion entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.18.1.12.1.2.1.3 | Columngs2108cBandwidthConfIgressBW | read-write | current | Get/Set the igress rate of the bandwidth management configuration. The igrees rate is from 0 to 1000. |
| 1.3.6.1.4.1.5205.2.18.1.12.1.2.1.4 | Columngs2108cBandwidthConfStormState | read-write | current | The storm state of the bandwidth management configurateion entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.18.1.12.1.2.1.5 | Columngs2108cBandwidthConfStormBW | read-write | current | Get/Set the storm rate of the bandwidth management configuration. The storm rate is from 0 to 1000. |
| 1.3.6.1.4.1.5205.2.18.1.12.1.2.1.6 | Columngs2108cBandwidthConfEgressState | read-write | current | The egress state of the bandwidth management configurateion entry. 0 - disabled. 1 - enabled. |
| 1.3.6.1.4.1.5205.2.18.1.12.1.2.1.7 | Columngs2108cBandwidthConfEgressBW | read-write | current | Get/Set the egress rate of the bandwidth management configuration. The egress rate is from 0 to 1000. |
| 1.3.6.1.4.1.5205.2.18.1.20 | Nodegs2108cTrapEntry | |||
| 1.3.6.1.4.1.5205.2.18.1.20.1 | Notificationgs2108cModuleInserted | current | Send this trap when a moudle is inserted to the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.18.1.20.2 | Notificationgs2108cModuleRemoved | current | Send this trap when a moudule is removed from the system. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.18.1.20.3 | Notificationgs2108cDualMediaSwapped | current | Send this trap when the dual media port changed. The OID value means the port number. | |
| 1.3.6.1.4.1.5205.2.18.1.20.100 | Notificationgs2108cStpStateDisabled | current | Send this trap when the operational state of STP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.18.1.20.101 | Notificationgs2108cStpStateEnabled | current | Send this trap when the operational state of STP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.18.1.20.102 | Notificationgs2108cStpTopologyChanged | current | Send this trap when RSTP determines a port should enter the FORWARDING state (a topology change occurs). The OID value is the ifIndex of the port that produces… | |
| 1.3.6.1.4.1.5205.2.18.1.20.110 | Notificationgs2108cRmonRisingAlarm | current | Send this trap when an RMON rising alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that exceeds its own Risi… | |
| 1.3.6.1.4.1.5205.2.18.1.20.111 | Notificationgs2108cRmonFallingAlarm | current | Send this trap when an RMON falling alarm happened. The OID value is the value of another OID variable sampled by the RMON Alarm Group that is smaller than its… | |
| 1.3.6.1.4.1.5205.2.18.1.20.120 | Notificationgs2108cLacpStateDisabled | current | Send this trap when the operational state of LACP is from enabled to disabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.18.1.20.121 | Notificationgs2108cLacpStateEnabled | current | Send this trap when the operational state of LACP is from disabled to enabled. The OID value means the disabled Group ID. | |
| 1.3.6.1.4.1.5205.2.18.1.20.123 | Notificationgs2108cLacpPortAdded | current | Send this trap when the state of port is in 'trunk ready'. | |
| 1.3.6.1.4.1.5205.2.18.1.20.124 | Notificationgs2108cLacpPortTrunkFailure | current | Send this trap when one port is not able to be aggregated due to duplex-mode of the port. | |
| 1.3.6.1.4.1.5205.2.18.1.20.140 | Notificationgs2108cGvrpStateDisabled | current | Send this trap when the operational state of GVRP is from enabled to disabled. | |
| 1.3.6.1.4.1.5205.2.18.1.20.141 | Notificationgs2108cGvrpStateEnabled | current | Send this trap when the operational state of LACP is from disabled to enabled. | |
| 1.3.6.1.4.1.5205.2.18.1.20.150 | Notificationgs2108cVlanStateDisabled | current | Send this trap when the operational state of vlan is from enabled to disabled. The OID value means the enabled Group ID. | |
| 1.3.6.1.4.1.5205.2.18.1.20.151 | Notificationgs2108cVlanPortBaseEnabled | current | Send this trap when the operational state of vlan is changed to port-based vlan. | |
| 1.3.6.1.4.1.5205.2.18.1.20.152 | Notificationgs2108cVlanTagBaseEnabled | current | Send this trap when the operational state of vlan is changed to tag-based vlan. | |
| 1.3.6.1.4.1.5205.2.18.1.20.153 | Notificationgs2108cVlanMetroModeEnabled | current | Send this trap when the operational state of vlan is changed to Metro-mode vlan. The OID vlaue means the uplink port with this metro-mode vlan. | |
| 1.3.6.1.4.1.5205.2.18.1.20.154 | Notificationgs2108cVlanDoubleTagEnabled | current | Send this trap when the operational state of vlan is changed to Double-tag vlan. | |
| 1.3.6.1.4.1.5205.2.18.1.20.200 | Notificationgs2108cUserLogin | current | Send this trap when one user logins the system. | |
| 1.3.6.1.4.1.5205.2.18.1.20.201 | Notificationgs2108cUserLogout | current | Send this trap when one user logouts the system. | |
| 1.3.6.1.4.1.5205.2.18.1.21 | Nodegs2108cTrapVariable | |||
| 1.3.6.1.4.1.5205.2.18.1.21.1 | Scalarusername | read-only | current | System account name. |
| 1.3.6.1.4.1.5205.2.18.1.21.2 | ScalargroupId | read-only | current | The Trunk group ID of LACP. |
| 1.3.6.1.4.1.5205.2.18.1.21.3 | Scalaractorkey | read-only | current | The actor key information for LACP. |
| 1.3.6.1.4.1.5205.2.18.1.21.4 | Scalarpartnerkey | read-only | current | The partner key information for LACP. |
| 1.3.6.1.4.1.5205.2.18.1.21.5 | Scalaruplink | read-only | current | Uplink port(s) in the metro-mode vlan. |