RUCKUS-PPPOE-MIB
10 objects
Ruckus PPPoE mib objects.
Imported Objects
| IF-MIB | InterfaceIndex |
| RUCKUS-ROOT-MIB | ruckusCommonPPPOEModule |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25053.1.1.8.1 | IdentityruckusPPPOEMIB | Ruckus PPPoE mib objects. | ||
| 1.3.6.1.4.1.25053.1.1.8.1.1 | NoderuckusPPPOEObjects | |||
| 1.3.6.1.4.1.25053.1.1.8.1.1.1 | NoderuckusPPPOEInfo | |||
| 1.3.6.1.4.1.25053.1.1.8.1.1.1.1 | ScalarruckusPPPOEUserName | read-write | current | Specifies PPPoE user name. But it will not be effective unless you set apply(1) to ruckusPPPOEApply. |
| 1.3.6.1.4.1.25053.1.1.8.1.1.1.2 | ScalarruckusPPPOEPassword | read-write | current | Specifies PPPoE password. But it will not be effective unless you set apply(1) to ruckusPPPOEApply. |
| 1.3.6.1.4.1.25053.1.1.8.1.1.1.3 | ScalarruckusPPPOEConnectionStatus | read-only | current | Specifies PPPoE connection status. Return up(1) if connection is up, down(2) if connection is down, disabled(3) if PPPoE is disabled. |
| 1.3.6.1.4.1.25053.1.1.8.1.1.1.4 | ScalarruckusPPPOEConnection | read-write | current | Set connect(1) to connect or re-connect and disConnect(2) to PPPoE server. On read, return enabled(3) if PPPoE is enabled, or disabled(4) if PPPoE is disabled. |
| 1.3.6.1.4.1.25053.1.1.8.1.1.1.5 | ScalarruckusPPPOEIfindex | read-only | current | Specifies the interface index, in the ifTable. |
| 1.3.6.1.4.1.25053.1.1.8.1.1.1.6 | ScalarruckusPPPOEApply | read-write | current | Set apply(1) to apply the change of username and password for PPPoE . Firstly, set the mib nodes : ruckusPPPOEUserName and ruckusPPPOEPassword . Secondly, set … |
| 1.3.6.1.4.1.25053.1.1.8.1.2 | NoderuckusPPPOEEvents |