RUCKUS-TC-MIB
47 objects
This is the mib module for defining all the textual conventions.
Imported Objects
| RUCKUS-ROOT-MIB | ruckusCommonTCModule |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25053.1.1.1.1 | IdentityruckusTCMIB | This is the mib module for defining all the textual conventions. | ||
| 1.3.6.1.4.1.25053.1.1.1.1.1 | NoderuckusTCObjects | |||
| 1.3.6.1.4.1.25053.1.1.1.1.2 | NoderuckusTCEvents | |||
| 1.3.6.1.4.1.25053.1.1.1.1.3 | NoderuckusTCConf | |||
| 1.3.6.1.4.1.25053.1.1.1.1.3.1 | NoderuckusTCGroups | |||
| 1.3.6.1.4.1.25053.1.1.1.1.3.2 | NoderuckusTCCompls |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RuckusAAAServiceType | INTEGER { active-directory(1), ldap-directory(2), aaa-authentication(3), aaa-accounting(4) } | current | The Ruckus AAA Server Service type. |
| RuckusAdminStatus | INTEGER { enable(1), disable(2) } | current | Administrative status for ruckus managed object. |
| RuckusAPApproveMode | INTEGER { approved(1), not-approved(2) } | current | ZD managed AP approve mode. |
| RuckusAPIpAddressSettingMode | INTEGER { admin-by-zd(1), admin-by-dhcp(2), admin-by-ap(3) } | current | The AP IP address setting mode, admin-by-zd : ZD configure the AP IP address, admin-by-dhcp : DHCP server configure the AP IP address, admin-by-ap : AP configure its IP address locally. |
| RuckusAPMeshConfigurationMode | INTEGER { auto(1), root-ap(2), mesh-ap(3), disabled(4) } | current | The Ruckus AP unit Mesh wireless configuration mode. |
| RuckusAPRadioTxPowerLevel | INTEGER { auto(1), full(2), half-full(3), quarter-full(4), one-eighth-full(5), one-tenth-full(6) } | current | The Ruckus AP unit wireless Radio Tx Power level setting. |
| RuckusAPRadioType | INTEGER { ieee80211bg(1), ieee80211na(2), ieee80211a(3), ieee80211n(4) } | current | The Ruckus AP unit wireless Radio type. |
| RuckusAPRadioType24 | INTEGER { ieee80211b(1), ieee80211g(2), ieee80211bg(3), ieee80211ng(4) } | current | The Ruckus AP unit wireless Radio type 2.4G. |
| RuckusAPRadioType5 | INTEGER { ieee80211a(1), ieee80211n(2), ieee80211nag(3)} | current | The Ruckus AP unit wireless Radio type 5G. |
| RuckusAPUplinkSelectionMode | INTEGER { smart(1), manual(2) } | current | The Ruckus AP unit wireless uplink selection mode. |
| RuckusAPWirelessChannel | Integer32 (0..11) | current | The AP radio channel, selectable 0, 1-11, 0 : auto channel selection, 1-11 : specific channel selection. |
| RuckusAuthenticationType | INTEGER { open(1), shared(2), eap(3), mac-address(4), eap-mac-mix(5) } | current | The Authentication types supported on Ruckus Wireless systems. |
| RuckusAuthStatusType | INTEGER { unauthorized(1), authorized(2)} | current | The authorized status. |
| RuckusChannelWidthType | INTEGER { cw10(10), cw20(20), cw2040(2040), cw40(40), cw80(80), cw160(160)} | current | Specifies the channel width. |
| RuckusCountryCode | OCTET STRING (SIZE (2)) | current | Specifies the country code. Each country represented as a two character. Here is the lsit: ALBANIA -> AL ALGERIA -> DZ ARGENTINA -> AR ARMENIA -> AM AUSTRALIA -> AU AUSTRIA -> AT AZERBAIJAN -> AZ BAHRAIN -> BH BELARUS -… |
| RuckusdB | Integer32 | current | Used to express values of type dB. |
| RuckusEncryptionType | INTEGER { wpa(1), wpa2(2), wpa-Mixed(3), wep-64(4), wep-128(5), none-enc(6) } | current | The Encryption types supported on Ruckus Wireless systems. |
| RuckusFequency | Integer32 (2412..5805) | current | This data type represents the frequency value that are expressed in MHz. Units are in thousands of a MHz. 2412 - 5805 MHz For example: 2.412 GHz would be represented as 2412 MHz |
| RuckusMeshRoles | INTEGER { disable(0), rap(1), map(2), emap(3), mesh-is-down(4), mesh-role-is-undefined(5) } | current | AP Mesh Roles. |
| RuckusNameString | OCTET STRING (SIZE (1..128)) | current | The general (128 characters) Name String defined on Ruckus Wireless systems. |
| RuckusPassPhrase | OCTET STRING (SIZE (8..64)) | current | The general (64 characters) passphrase defined on Ruckus Wireless systems. |
| RuckusRadioMode | INTEGER { ieee802dot11b(1), ieee802dot11g(2), ieee802dot11Mixed(3), ieee802dot11a(4), ieee802dot11ng(5), ieee802dot11na(6), ieee802dot11ac(7), ieee802dot11ax(8) } | current | Specifies the physical type of the radio. |
| RuckusRate | OCTET STRING (SIZE (1..126)) | current | This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 127, corresponding to data rates … |
| RuckusRateLimiting | INTEGER { disable(0), rate100Kbps(1), rate250Kbps(2), rate500Kbps(3), rate1Mbps(4), rate2Mbps(5), rate5Mbps(6), rate10Mbps(7), rate20Mbps(8), rate50Mbps(9) } | current | Used to express values of Rate limiting. |
| RuckusSNMPv3AuthenticationType | INTEGER { md5(1), sha(2) } | current | The SNMP v3 authentication type supported on Ruckus Wireless systems. |
| RuckusSNMPv3EncryptionType | INTEGER { des(1), aes(2) } | current | The SNMP v3 encryption type supported on Ruckus Wireless systems. |
| RuckusSNMPVersionType | INTEGER { v2(1), v3(2) } | current | The SNMP Version type supported on Ruckus Wireless systems. |
| RuckusSSID | OCTET STRING (SIZE (2..32)) | current | Ruckus service set identifier. |
| RuckusSysLogLevel | INTEGER { more(1), warning-and-critical(2), critical-only(3) } | current | The sysLog reporting levels supported on Ruckus Wireless systems. |
| RuckusSystemClusterStatus | INTEGER { in-service(0), out-of-service(1), maintenance(2), network-partition-suspected(4) } | current | The Cluster status. |
| RuckusSystemNodeStatus | INTEGER { out-of-service(0), in-service(8)} | current | The System status. |
| RuckusUUID | OCTET STRING (SIZE (16)) | current | Represents a UUID over 16 hex number |
| RuckusUUIDType | INTEGER { domain(1), zone(2), apgroup(3)} | current | UUID type of RuckusSummaryApTable index |
| RuckusWEPKey | OCTET STRING (SIZE (5 | 13 | 10 | 26)) | current | Specifies the WEP key. |
| RuckusWLANAuthMethodType | INTEGER { open(1), wep-shared(2), auto(3), wpa-eap-802-1x(4)} | current | Specifies the security mode. if wep, only open; if wpa, open,wpa-eap-802-1x,auto ; for auto,is open,wpa-eap-802-1x |
| RuckusWLANEncryptionType | INTEGER { open(1), wep(2), wpa(3)} | current | Specifies the security mode of this WLAN. |
| RuckusWLANServicePriority | INTEGER { high(1), low(2) } | current | The LAN QoS Service levels supported on Ruckus Wireless systems. |
| RuckusWLANServiceType | INTEGER { standardUsage(1), guestAccess(2), hotSpotService(3) } | current | The WLAN Service types supported on Ruckus Wireless systems. |
| RuckusWPACipherType | INTEGER { tkip(1), aes(2), auto(3), none(4) } | current | The WPA Encryption Cipher methods supported on Ruckus Wireless systems. |
| RuckusWPAPassPhrase | OCTET STRING (SIZE (8..63 | 64)) | current | Specifies the WPA PSK (Wi-Fi Protected Access Pre Shared key). If the key length is 64 then all 64 characters should be in hex, otherwise the key assumed to be ascii. |
| RuckusZDAPManagementAdminControl | INTEGER { delete(1), associated(2) } | current | The ZD management control of an AP. |