RUCKUS-UPGRADE-MIB
15 objects
This is the software upgrade management objects.
Imported Objects
| RUCKUS-ROOT-MIB | ruckusCommonUpgradeModule |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25053.1.1.5.1 | IdentityruckusUpgradeMIB | This is the software upgrade management objects. | ||
| 1.3.6.1.4.1.25053.1.1.5.1.1 | NoderuckusUpgradeObjects | |||
| 1.3.6.1.4.1.25053.1.1.5.1.1.1 | NoderuckusFileTransfer | |||
| 1.3.6.1.4.1.25053.1.1.5.1.1.1.1 | ScalarruckusFileTransferMethod | read-write | current | Specifies the file tranfer method. ruckusFileTransferFTPUsername and ruckusFileTransferFTPPassword must be specified if FTP(2) is elected |
| 1.3.6.1.4.1.25053.1.1.5.1.1.1.2 | ScalarruckusFileTransferHostName | read-write | current | Specifies the name of the host where the control file is residing.It is the same as 'ruckusFileTransferHostAddr' when it is a ipv4/ipv6 address. the value is i… |
| 1.3.6.1.4.1.25053.1.1.5.1.1.1.3 | ScalarruckusFileTransferHostAddr | read-write | current | Specifies the IP(V6) address of the host. This IP(V6) address shall be used when DNS resolution fails with ruckusFileTransferHostName. This node is the same as… |
| 1.3.6.1.4.1.25053.1.1.5.1.1.1.4 | ScalarruckusFileTransferControlFileName | read-write | current | Specifies the name of the control file. |
| 1.3.6.1.4.1.25053.1.1.5.1.1.1.5 | ScalarruckusFileTransferFTPUsername | read-write | current | Specifies username for FTP file transfer. |
| 1.3.6.1.4.1.25053.1.1.5.1.1.1.6 | ScalarruckusFileTransferFTPPassword | read-write | current | Specifies password for FTP file transfer. |
| 1.3.6.1.4.1.25053.1.1.5.1.1.1.7 | ScalarruckusFileTransferUpgradeNow | read-write | current | Setting this object to true(1) would cause upgrade to take place immediately. Always returns false(2) on read. |
| 1.3.6.1.4.1.25053.1.1.5.1.1.1.8 | ScalarruckusFileTransferTakeEffectImmediately | read-write | current | Setting this object to true(1) sets a flag such that the device will reboot upon successful completion of the transfer. Reading it returns the state of that fl… |
| 1.3.6.1.4.1.25053.1.1.5.1.1.2 | NoderuckusAutoUpgrade | |||
| 1.3.6.1.4.1.25053.1.1.5.1.1.2.1 | ScalarruckusAutoUpgradeInitialCheckInterval | read-write | current | Specifies initial check interval. |
| 1.3.6.1.4.1.25053.1.1.5.1.1.2.2 | ScalarruckusAutoUpgradeCheckInterval | read-write | current | Specifies the interval in minutes, to check if there is a new software available at the host. If the interval is zero, means that the software download is disa… |
| 1.3.6.1.4.1.25053.1.1.5.1.1.2.3 | ScalarruckusAutoUpgradeStatus | read-write | current | To enable/disable automatic upgrade capability. |