RUGGEDCOM-SYS-INFO-MIB
62 objects
RuggedCom system information MIB.
Imported Objects
| RUGGEDCOM-MIB | ruggedcomMgmt |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.15004.4.2 | IdentityrcSysInfo | RuggedCom system information MIB. | ||
| 1.3.6.1.4.1.15004.4.2.1 | IdentityrcDeviceError | current | The main subtree for various errors detected in RuggedCom devices. | |
| 1.3.6.1.4.1.15004.4.2.1.1 | ScalarrcDeviceErrBootupError | read-only | current | The error discovered during bootup process. If there was no error during device bootup, zero length string will be retreived. |
| 1.3.6.1.4.1.15004.4.2.1.2 | ScalarrcDeviceErrWatchdogReset | read-only | current | Indicates whether the last device reboot was caused by wachdog. |
| 1.3.6.1.4.1.15004.4.2.1.3 | ScalarrcDeviceErrConfigurationFailure | read-only | current | Indicates whether errors were detected while applying configuration settings from configuration file. Configuration is updated from the configureation file at … |
| 1.3.6.1.4.1.15004.4.2.1.4 | ScalarrcDeviceErrCrashLogCreated | read-only | current | Indicates whether the device error that caused creation of an entry in crashlog.txt file was detected. Whenever the value of this object changes from false(2) … |
| 1.3.6.1.4.1.15004.4.2.1.5 | ScalarrcDeviceErrStackOverflow | read-only | current | Indicates whether the stack of any of the system tasks is used over the system threshold. Whenever the value of this object changes from false(2) to true(1), t… |
| 1.3.6.1.4.1.15004.4.2.1.6 | ScalarrcDeviceErrHeapError | read-only | current | Indicates whether the system memory corruption was detected. Whenever the value of this object changes from false(2) to true(1), the device will generate gener… |
| 1.3.6.1.4.1.15004.4.2.1.7 | ScalarrcDeviceErrDateAndTimeSetFailed | read-only | current | Indicates whether the date and time setting in the device falied. Whenever the value of this object changes from false(2) to true(1), the device will generate … |
| 1.3.6.1.4.1.15004.4.2.1.8 | ScalarrcDeviceErrNtpServerUnreachable | read-only | current | Indicates whether the NTP server (if required) can be reached. Whenever the value of this object changes from false(2) to true(1), the device will generate gen… |
| 1.3.6.1.4.1.15004.4.2.1.9 | ScalarrcDeviceErrBootPTftpTrFailed | read-only | current | Indicates whether the the file was transfered properly after obtaining IP address from the BootP server. Whenever the value of this object changes from false(2… |
| 1.3.6.1.4.1.15004.4.2.1.10 | ScalarrcDeviceErrRadiusServerUnreachable | read-only | current | Indicates whether the RADIUS server (if required) can be reached. Whenever the value of this object changes from false(2) to true(1), the device will generate … |
| 1.3.6.1.4.1.15004.4.2.1.11 | ScalarrcDeviceErrTacacsServerUnreachable | read-only | current | Indicates whether the TACACS+ server (if required) can be reached. Whenever the value of this object changes from false(2) to true(1), the device will generate… |
| 1.3.6.1.4.1.15004.4.2.2 | IdentityrcDeviceStatus | current | The main subtree for various status information detected in RuggedCom devices. | |
| 1.3.6.1.4.1.15004.4.2.2.1 | ScalarrcDeviceStsCpuUsage | read-only | current | The percentage in tenths of percent of available CPU cycles used for device operation as measured over the last second when object was retreived. |
| 1.3.6.1.4.1.15004.4.2.2.2 | ScalarrcDeviceStsAvailableRam | read-only | current | The total number of bytes of RAM still available in the system control CPU. |
| 1.3.6.1.4.1.15004.4.2.2.3 | ScalarrcDeviceStsTemperature | read-only | current | The temperature measured in the device. |
| 1.3.6.1.4.1.15004.4.2.2.4 | ScalarrcDeviceStsPowerSupply1 | read-only | current | Indicates the status of Power Supply Module 1. Whenever the value of this object changes from functional(2) to notFunctional(3), or from notFunctionl(3) to fun… |
| 1.3.6.1.4.1.15004.4.2.2.5 | ScalarrcDeviceStsPowerSupply2 | read-only | current | Indicates the status of Power Supply Module 2. Whenever the value of this object changes from functional(2) to notFunctional(3), or from notFunctionl(3) to fun… |
| 1.3.6.1.4.1.15004.4.2.2.6 | ScalarrcDeviceStsCpuUsagePercent | read-only | current | The percentage of available CPU cycles used for device operation as measured over the last second when object was retreived. |
| 1.3.6.1.4.1.15004.4.2.2.7 | ScalarrcDeviceStsFailSafeRelay | read-only | current | Indicates status of fail safe relay in the device. Fail safe relay is deEnergized(2) if there is at least one active alarm recorded in the device. |
| 1.3.6.1.4.1.15004.4.2.2.8 | ScalarrcDeviceStsErrorAlarm | read-only | current | Indicates that at least one alarm of level ERROR, ALERT or CRITICAL is active in the device. |
| 1.3.6.1.4.1.15004.4.2.2.9 | ScalarrcDeviceStsNoOfActiveAlarms | read-only | current | Number of active alarms currently recorded in device. |
| 1.3.6.1.4.1.15004.4.2.2.10 | ScalarrcDeviceStsFanBank1 | read-only | current | Indicates the status of Fan Bank Module 1. |
| 1.3.6.1.4.1.15004.4.2.2.11 | ScalarrcDeviceStsFanBank2 | read-only | current | Indicates the status of Fan Bank Module 2. |
| 1.3.6.1.4.1.15004.4.2.2.12 | ScalarrcDeviceStsPwdsWeak | read-only | current | Indicates if any of passwords is configured as 'weak'. Change in the value of the bit in this object from '0' to '1' will generate weakPasswordTrap. |
| 1.3.6.1.4.1.15004.4.2.2.13 | ScalarrcDeviceStsKeysDflt | read-only | current | Indicates if any of secure services uses default keys and/or certificates. Customer is advised to update keys for secure services if defaults are used. Change … |
| 1.3.6.1.4.1.15004.4.2.3 | IdentityrcDeviceInfo | current | The main subtree for RuggedCom devices manufacturing information. | |
| 1.3.6.1.4.1.15004.4.2.3.1 | ScalarrcDeviceInfoSerialNumber | read-only | current | The manufacturing serial number of the device. |
| 1.3.6.1.4.1.15004.4.2.3.2 | ScalarrcDeviceInfoBootSwVersion | read-only | current | The version and the build date of the boot loader software. |
| 1.3.6.1.4.1.15004.4.2.3.3 | ScalarrcDeviceInfoMainSwVersion | read-only | current | The version and the build date of the main operating system software. |
| 1.3.6.1.4.1.15004.4.2.3.4 | ScalarrcDeviceInfoMainBoardType | read-only | current | The identification code of the device main board. |
| 1.3.6.1.4.1.15004.4.2.3.5 | ScalarrcDeviceInfoTotalRam | read-only | current | The total number of bytes of RAM in the system control CPU. |
| 1.3.6.1.4.1.15004.4.2.3.6 | ScalarrcDeviceInfoPendingBootSwVersion | read-only | current | The version and the build date of the boot loader software that has been loaded to the device and is pending reboot. Whenever the value of this object changes … |
| 1.3.6.1.4.1.15004.4.2.3.7 | ScalarrcDeviceInfoPendingMainSwVersion | read-only | current | The version and the build date of the main operating system software that has been loaded to the device and is pending reboot. Whenever the value of this objec… |
| 1.3.6.1.4.1.15004.4.2.3.8 | ScalarrcDeviceInfoCfgRevision | read-only | current | The configuration file revision. The revision number will be updated whenever file is saved to the flash memory. This number is recorded in config.csv at the t… |
| 1.3.6.1.4.1.15004.4.2.3.9 | ScalarrcDeviceInfoMinBootSwVer | read-only | current | The minimum version of the boot loader software required by ROS device. If this version is not newer than the version retreived as a value of object rcDeviceIn… |
| 1.3.6.1.4.1.15004.4.2.4 | IdentityrcDeviceCommands | current | The main subtree for device control commands. | |
| 1.3.6.1.4.1.15004.4.2.4.1 | ScalarrcDeviceCommReset | read-write | current | Setting the value of this object to 'true(1)' will cause device to reboot. As a result of Read request the agent will return value 'false(2)'. |
| 1.3.6.1.4.1.15004.4.2.4.2 | ScalarrcDeviceCommLoadDefaultCfg | read-write | current | Setting the value of this object to 'true(1)' will force device to load default configuration to all tables. As a result of Read request the agent will return … |
| 1.3.6.1.4.1.15004.4.2.4.3 | ScalarrcDeviceCommClearAlarms | read-write | current | Setting the value of this object to 'true(1)' will cause device to clear all alarms. As a result of Read request the agent will return value 'false(2)'. |
| 1.3.6.1.4.1.15004.4.2.4.4 | ScalarrcDeviceCommClearSyslog | read-write | current | Setting the value of this object to 'true(1)' will cause device to clear syslog.txt file. As a result of Read request the agent will return value 'false(2)'. |
| 1.3.6.1.4.1.15004.4.2.4.5 | ScalarrcDeviceCommClearLogs | read-write | current | Setting the value of this object to 'true(1)' will cause device to clear syslog.txt and crashlog.txt files. As a result of Read request the agent will return v… |
| 1.3.6.1.4.1.15004.4.2.4.6 | ScalarrcDeviceCommIdentify | read-write | current | Time Period in seconds for which the device should continue flashing the LEDs when possible so that device is visually recognized. Setting this value to any va… |
| 1.3.6.1.4.1.15004.4.2.5 | NodercSysInfoConformance | |||
| 1.3.6.1.4.1.15004.4.2.5.2 | NodercSysInfoGroups | |||
| 1.3.6.1.4.1.15004.4.2.5.2.1 | GrouprcSysErrObjectsGroup | current | A group of objects providing information about irregularities in the device. | |
| 1.3.6.1.4.1.15004.4.2.5.2.2 | GrouprcSysStsObjectsGroup | current | A group of objects providing information device resources. | |
| 1.3.6.1.4.1.15004.4.2.5.2.3 | GrouprcSysStsObjectsTemperatureGroup | current | This group is created to allow MIBs for products that do not have temperature sensore installed to exclude rcDeviceStsTemperature object. | |
| 1.3.6.1.4.1.15004.4.2.5.2.4 | GrouprcSysStsPowerSupplyGroup | current | A group of objects providing information about power supply modules in the device. This group is mandatory for products with redundant power supply. | |
| 1.3.6.1.4.1.15004.4.2.5.2.5 | GrouprcSysInfoDeviceInfoGroup | current | A group of object providing manufacturer's information about product's main board hardware, software, identification. | |
| 1.3.6.1.4.1.15004.4.2.5.2.6 | GrouprcSysDeviceCommGroup | current | A group of object providing device control commands. | |
| 1.3.6.1.4.1.15004.4.2.5.2.7 | GrouprcSysDeviceCommIdentifyGroup | current | A group of object providing device control commands for visual recognisation of the device (LED flashing). | |
| 1.3.6.1.4.1.15004.4.2.5.2.8 | GrouprcSysStsObjectsGroup1 | current | A group of objects providing information device resources. | |
| 1.3.6.1.4.1.15004.4.2.5.2.9 | GrouprcSysStsFanBankGroup | current | A group of objects providing information about fan bank modules in the device. This group is mandatory for products with redundant fan banks. | |
| 1.3.6.1.4.1.15004.4.2.5.2.10 | GrouprcSysDeviceSecurityGroup | current | A group of object providing device control commands. | |
| 1.3.6.1.4.1.15004.4.2.5.2.11 | GrouprcSysDeviceSecurityGroup01 | current | A group of object providing device control commands. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RcFanStatus | INTEGER { notPresent(1), failed(2), standby(3), off(4), on(5) } | current | The status of a fan-bank. |
| RcHardwareStatus | INTEGER { notPresent(1), functional(2), notFunctional(3), notConnected(4) } | current | A status of a hardware module in the RuggedCom device. |
| RcHotswapModuleSlot | INTEGER { pm1(1), lm1(2), lm2(3), lm3(4), cm(5), sm(6), lm4(7), lm5(8), lm6(9), pm2(10), main(11), em(12) } | current | A physical slot holding the hotswapable module (ROX 2 specific). As the value 0 is forbidden in SNMP enumerations, this value is the value 1 higher than some other ROX 2 slot values |
| RcHotswapModuleState | INTEGER { empty(1), disabled(2), resetting(3), operating(4), failed(5), unknown(255) } | current | A status of a hardware module in the RuggedCom device. |
| RcMainBoard | INTEGER { rsMCPU2(1), rs400revB2(2), rmc30(3), rs900revB1F(4), rs900revB1noF(5), rs1600M(6), rs400revC1(7), rsG2100(8), rs900G(9), rsG2200(10), rs969(11), rs900v2F(12), rs900v2noF(13), rs416(15), rsRMC30Ksz80001(16), rs930(17), rs969v2(18), rs910(19), rs920(20), rs940G(21), rsi80x(22), rsG2300(23), rs416v2(24), rsg2288(25), rp110(26), rs900GP(27), rs900M(28), rs950G(29), rsG2488(61), rsG2488v2(62), rsG2488v3(63), rmc8388A(64), rmc8388B(65), rmc8388C(66), rsG920P(67), rsMCPU(255), rx1000(256), rx1100(257), rx1500(258), rx1501(259), rx1510(260), rx1511(261), rx1512(262), rx5000(263), mx5000(264), rx1400(265) } | current | A main board type code. This textual convention will be updated any time when new main board type is developed. |