S5-AGENT-MIB
276 objects
S5000 Agent MIB Copyright 1995 - 2015 Avaya, Inc. All rights reserved. This Bay Networks SNMP Management Information Base Specification (Specification) embodies Bay Networks' confidential and proprietary intellectual property. Bay Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Bay Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.6.4.1 | Nodes5AgentHw | |||
| 1.3.6.1.4.1.45.1.6.4.1.1 | Scalars5AgMyGrpIndx | read-only | current | The index of the group containing the agent. |
| 1.3.6.1.4.1.45.1.6.4.1.2 | Scalars5AgMyComIndx | read-only | current | The index of the component containing the agent. |
| 1.3.6.1.4.1.45.1.6.4.2 | Nodes5AgentInfo | |||
| 1.3.6.1.4.1.45.1.6.4.2.1 | Nodes5AgentGbl | |||
| 1.3.6.1.4.1.45.1.6.4.2.1.1 | Scalars5AgInfoReBoot | read-write | current | Action object to reboot the agent. The following values can only be read: other(1).....agent in unknown or other state running(2)...agent running The following… |
| 1.3.6.1.4.1.45.1.6.4.2.1.2 | Scalars5AgInfoWriteCfg | read-write | current | Action object to cause current configuration settings to be written to local nonvolatile storage. The following values can only be read: other(1)...some unknow… |
| 1.3.6.1.4.1.45.1.6.4.2.1.3 | Scalars5AgInfoMgmtProtocolNxtBoot | read-write | current | The transport protocol(s) to use after the next boot of the agent. The following value is read-only: other(1)....unknown or some other protocol The following v… |
| 1.3.6.1.4.1.45.1.6.4.2.1.4 | Scalars5AgInfoMgmtProtocolCur | read-write | current | The current transport protocol(s) that are being supported by the agent. The following value is read-only: other(1)....unknown or some other protocol The follo… |
| 1.3.6.1.4.1.45.1.6.4.2.1.5 | Scalars5AgInfoBootMode | read-write | current | The source for initial protocol configuration information at next boot. For IP, a setting of net(3), netWhenNeeded(4), or netOrLastAddress(5) means that BOOTP … |
| 1.3.6.1.4.1.45.1.6.4.2.1.6 | Scalars5AgInfoCfgLoadMode | read-write | current | The source from which to load configuration information at next boot. The following value is read-only: other(1)...not applicable or some other case The follow… |
| 1.3.6.1.4.1.45.1.6.4.2.1.7 | Scalars5AgInfoImgLoadMode | read-write | current | The source from which to load the agent image at next boot. The following value is read-only: other(1)...not applicable or some other case The following values… |
| 1.3.6.1.4.1.45.1.6.4.2.1.8 | Scalars5AgInfoImgSaveMode | read-write | current | Indicates what to do with the image (when loaded from the network) on the next boot. The following value can only be read: notAvail(1)...the save operation is … |
| 1.3.6.1.4.1.45.1.6.4.2.1.9 | Scalars5AgInfoImgSaveStatus | read-only | current | Indicates what happened to the image file on the last boot. The following values are returned: notAvail(1).....the save operation is not available noSave(2)...… |
| 1.3.6.1.4.1.45.1.6.4.2.1.10 | Scalars5AgInfoVer | read-only | current | The version of the agent in the form 'major.minor.maintenance[letters]'. This is an alias for the value of the object s5ChasStoreCntntVer for the RAM of the mo… |
| 1.3.6.1.4.1.45.1.6.4.2.1.11 | Scalars5AgInfoLocStorVer | read-only | current | The version of the agent image saved in local storage such as flash memory in the form 'major.minor.maintenance[letters]'. If not known or not available, then … |
| 1.3.6.1.4.1.45.1.6.4.2.1.12 | Scalars5AgInfoNxtBootDfltGwAddr | read-write | current | The IP address of the default gateway (router) for the agent to use after the next boot. (NOTE: the current default router is the value of object s5AgInfoCurDf… |
| 1.3.6.1.4.1.45.1.6.4.2.1.13 | Scalars5AgInfoCurDfltGwAddr | read-write | current | The IP address of the current default gateway (router). (NOTE: this is an alias for the object ipRouteNextHop in the row of the table ipRouteTable which has ob… |
| 1.3.6.1.4.1.45.1.6.4.2.1.14 | Scalars5AgInfoDramUsage | read-only | current | An indication of the percentage of DRAM currently in use by this agent. If this information is not available the agent shall return -1, otherwise the percentag… |
| 1.3.6.1.4.1.45.1.6.4.2.1.15 | Scalars5AgInfoLoadProtocolNxtBoot | read-write | current | The transport protocol(s) over which the agent is to use to load the configuration information and the agent image at the next boot of the agent. The following… |
| 1.3.6.1.4.1.45.1.6.4.2.1.16 | Scalars5AgInfoLoadProtocolLast | read-only | current | The transport protocol over which the agent image and configuration information were last loaded. The following values are read-only: reserved(1)...reserved ip… |
| 1.3.6.1.4.1.45.1.6.4.2.1.17 | Scalars5AgInfoSlotScope | read-only | current | This object contains information about all the slots an agent can manage. The value is encoded in an octet string. One byte has information about 8 slots. If a… |
| 1.3.6.1.4.1.45.1.6.4.2.1.18 | Scalars5AgInfoImgType | read-only | current | Indicates the type of agent image. This object is meant to distinguish between agents having the same version number running on the same hardware, but with dis… |
| 1.3.6.1.4.1.45.1.6.4.2.1.19 | Scalars5AgInfoScheduleBootTime | read-write | current | The time, measured in minutes, remaining until the action(s) set by s5AgInfoReBoot will be performed. This value must be set in the same set request as the val… |
| 1.3.6.1.4.1.45.1.6.4.2.1.20 | Scalars5AgInfoScheduleBootCancel | read-write | current | Cancel a scheduled s5AgInfoReboot action. The following value is read-only: other(1)...not applicable or some other case This is always the value that return w… |
| 1.3.6.1.4.1.45.1.6.4.2.1.21 | Scalars5AgInfoNumBootBanks | read-only | current | The number of local storage locations (or flash memory banks) available on this device for operational code images. Devices without local image capability or n… |
| 1.3.6.1.4.1.45.1.6.4.2.1.22 | Scalars5AgInfoNextBootBank | read-write | current | The source of the image to be loaded upon the next boot of the device. If a value is set larger than s5AgInfoNumBootBanks, a badValue error should be returned.… |
| 1.3.6.1.4.1.45.1.6.4.2.1.23 | Scalars5AgInfoDstLoadBank | read-write | current | The local storage bank where the next system image image is downloaded to. Devices without local image capability or not supporting this attribute shall return… |
| 1.3.6.1.4.1.45.1.6.4.2.1.24 | Scalars5AgInfoFileAction | read-write | current | This object is used to copy a config file or an image file. Typically, the copy is to/from a TFTP server, though other types of sources/destinations are possib… |
| 1.3.6.1.4.1.45.1.6.4.2.1.25 | Scalars5AgInfoFileStatus | read-only | current | This object is used to get the status of the latest action as shown by s5AgInfoFileAction. The values that can be read are: other(1) ......... if no action tak… |
| 1.3.6.1.4.1.45.1.6.4.2.1.26 | Scalars5AgInfoStackBootpMACUsage | read-write | current | This object is used to get/set which MAC address is used by a stackable system when performing BOOTP requests during bootup. A value of useBaseUnitMACAddress(2… |
| 1.3.6.1.4.1.45.1.6.4.2.1.27 | Scalars5AgInfoImgDownloadStatus | read-only | current | This object indicates the current operational status of the software image download process. |
| 1.3.6.1.4.1.45.1.6.4.2.1.28 | Scalars5AgInfoImgDownloadPercentComplete | read-only | current | This object indicates the percentage complete of the current phase of the software image download process. |
| 1.3.6.1.4.1.45.1.6.4.2.2 | Tables5AgMyIfTable | not-accessible | current | A table that provides additional information about the agent's interfaces. The number of entries in the table is determined by the number of interfaces on the … |
| 1.3.6.1.4.1.45.1.6.4.2.2.1 | Rows5AgMyIfEntry | not-accessible | current | A row in the table of additional information about the agent's interfaces. Entries can not be created or deleted via SNMP requests. |
| 1.3.6.1.4.1.45.1.6.4.2.2.1.1 | Columns5AgMyIfIndx | read-only | current | The index of the interface. This has the same value as ifIndex for the interface. |
| 1.3.6.1.4.1.45.1.6.4.2.2.1.2 | Columns5AgMyIfNxtBootIpAddr | read-write | current | For the next boot, the IP address of the the interface. If not used, then the value is 0.0.0.0. (NOTE: the current IP address for the interface is found in tab… |
| 1.3.6.1.4.1.45.1.6.4.2.2.1.3 | Columns5AgMyIfNxtBootNetMask | read-write | current | For the next boot, the subnet mask for the interface. If not used, then the value is 0.0.0.0. (NOTE: the current subnet mask for the interface is found in tabl… |
| 1.3.6.1.4.1.45.1.6.4.2.2.1.4 | Columns5AgMyIfCfgFname | read-write | current | Name of the configuration file currently associated with the interface. When not used, the value is a zero length string. |
| 1.3.6.1.4.1.45.1.6.4.2.2.1.5 | Columns5AgMyIfLdSvrAddr | read-write | current | The IP address of the load server for the configuration file and/or the image file. If not used, then the value is 0.0.0.0 |
| 1.3.6.1.4.1.45.1.6.4.2.2.1.6 | Columns5AgMyIfImgFname | read-write | current | Name of the image file(s) currently associated with the interface. Some agents in special situations may support a value which contains multiple file names ins… |
| 1.3.6.1.4.1.45.1.6.4.2.2.1.7 | Columns5AgMyIfValidFlag | read-only | current | Indicates if the configuration and/or image file(s) were downloaded from this interface and if the file names have not been changed. The following values can b… |
| 1.3.6.1.4.1.45.1.6.4.2.2.1.8 | Columns5AgMyIfNxtBootIpxAddr | read-only | current | For the next boot, the IPX address of the the interface. If the IPX protocol is not used, then the value is 00000000:000000000000. NOTE: The current IPX addres… |
| 1.3.6.1.4.1.45.1.6.4.2.2.1.9 | Columns5AgMyIfBootRouterAddr | read-write | current | The IP address of the boot router for the configuration file and/or the image file. If not used, then the value is 0.0.0.0 |
| 1.3.6.1.4.1.45.1.6.4.2.2.1.10 | Columns5AgMyIfMacAddr | read-only | current | The MAC address of the interface. The value is 00:00:00:00:00:00 if there is no interface. |
| 1.3.6.1.4.1.45.1.6.4.2.3 | Tables5AgOthIfTable | not-accessible | current | A table that provides information about each interface for each agent in the chassis. The number of entries in the table is determined by the number of agents … |
| 1.3.6.1.4.1.45.1.6.4.2.3.1 | Rows5AgOthIfEntry | not-accessible | current | A row in the table of information about interface information for all agents in the chassis. Entries can not be created or deleted via SNMP requests. |
| 1.3.6.1.4.1.45.1.6.4.2.3.1.1 | Columns5AgOthIfGrpIndx | read-only | current | The index of the group containing the component containing the agent. |
| 1.3.6.1.4.1.45.1.6.4.2.3.1.2 | Columns5AgOthIfComIndx | read-only | current | The index of the component in the group containing the agent. |
| 1.3.6.1.4.1.45.1.6.4.2.3.1.3 | Columns5AgOthIfIndx | read-only | current | The index of the interface. This is the same value as ifIndex. |
| 1.3.6.1.4.1.45.1.6.4.2.3.1.4 | Columns5AgOthIfIpAddr | read-write | current | The IP address of the interface. If not used, then the value is 0.0.0.0. |
| 1.3.6.1.4.1.45.1.6.4.2.3.1.5 | Columns5AgOthIfIpxAddr | read-write | current | The IPX address of the interface. If the IPX protocol is not used, then the value is 00000000:000000000000. |
| 1.3.6.1.4.1.45.1.6.4.2.4 | Scalars5AgIpRtrDefaultTimeToLive | read-write | current | The lifetime of IP router entries in seconds. The maximum length of time that a IP router is to be considered alive in the absence of further positive advice. … |
| 1.3.6.1.4.1.45.1.6.4.2.5 | Scalars5AgIpDefaultRtrSelectionMode | read-write | current | The method used to select a default IP router. The following value is read-only: other(1).......not applicable or other case The following values are read-writ… |
| 1.3.6.1.4.1.45.1.6.4.2.6 | Scalars5AgIpRtrDiscoverySolicitMode | read-write | current | The router discovery solicitation mode to use when the default router selection mode is dynamic. This solicitation mode determines the IP address for ICMP rout… |
| 1.3.6.1.4.1.45.1.6.4.2.7 | Tables5AgDataCollectTable | not-accessible | current | A table of control information and statistics for the data collection (promiscuous data capturing) per source of detection. |
| 1.3.6.1.4.1.45.1.6.4.2.7.1 | Rows5AgDataCollectEntry | not-accessible | current | A row in the data collection table. Entries can not be created or deleted via SNMP. |
| 1.3.6.1.4.1.45.1.6.4.2.7.1.1 | Columns5AgDataCollectIfIndex | read-only | current | An integer value representing the source that collects data from the network. A value greater than zero is the index of the agent's interface on the NMM. This … |
| 1.3.6.1.4.1.45.1.6.4.2.7.1.2 | Columns5AgDataCollectSnTimeStamp | read-only | current | The value of sysUpTime at the last time a node was added or deleted from the Show Node table. |
| 1.3.6.1.4.1.45.1.6.4.2.7.1.3 | Columns5AgDataCollectNetworkAddrStatus | read-write | current | A switch to enable or disable the collecting of network layer addresses for the network address mapping table (s5CmNetAddrTable ). The following value is read-… |
| 1.3.6.1.4.1.45.1.6.4.2.8 | Scalars5AgUnAuthIpAddr | read-only | current | This object contains the IP address of the last station that tried to access this agent with an invalid community string. This object is used as a VarBind in a… |
| 1.3.6.1.4.1.45.1.6.4.2.9 | Scalars5AgUnAuthIpxAddr | read-only | current | This object contains the IPX address of the last station that tried to access this agent with an invalid community string. This object is used as a VarBind in … |
| 1.3.6.1.4.1.45.1.6.4.2.10 | Scalars5AgUnAuthComm | read-only | current | This object contains the community string of the last unauthenticated attempt to access this agent. This object is used as a VarBind in an Authentication Trap … |
| 1.3.6.1.4.1.45.1.6.4.2.11 | Tables5AgTrapFilterTable | not-accessible | current | Agent Trap filter configuration table. |
| 1.3.6.1.4.1.45.1.6.4.2.11.1 | Rows5AgTrapFilterEntry | not-accessible | current | A list of trap filter entries that determine the filtering of traps. For example, an instance of the s5AgtTrapFilterStatus will be named s5AgTrapFilterStatus.8 |
| 1.3.6.1.4.1.45.1.6.4.2.11.1.1 | Columns5AgTrapFilterIndex | read-only | current | An index that uniquely identifies an entry in the s5AgTrapFilterTable. |
| 1.3.6.1.4.1.45.1.6.4.2.11.1.2 | Columns5AgTrapFilterTrapOID | read-write | current | The OID of the trap. This variable is requried for row creation. |
| 1.3.6.1.4.1.45.1.6.4.2.11.1.3 | Columns5AgTrapFilterTrapInitiator1 | read-write | current | A value that determines the first condition for filtering a trap.This entry is the value of the first varbind for a particular trap in most cases. We need to s… |
| 1.3.6.1.4.1.45.1.6.4.2.11.1.4 | Columns5AgTrapFilterTrapInitiator2 | read-write | current | A value that determines the second condition for filtering a trap. This entry is the value of the second varbind for most traps. If the value of this initiator… |
| 1.3.6.1.4.1.45.1.6.4.2.11.1.5 | Columns5AgTrapFilterTrapInitiator3 | read-write | current | A value that determines the third condition for filtering a trap. This entry is the value of the third varbind for most traps. If the value of this initiator i… |
| 1.3.6.1.4.1.45.1.6.4.2.11.1.6 | Columns5AgTrapFilterStatus | read-write | current | Indicates whether this trap is enabled or not. enabled(1) indicates that if this type of event occurs, a trap that is generated will be queued for transmit. di… |
| 1.3.6.1.4.1.45.1.6.4.2.11.1.7 | Columns5AgTrapFilterDelayTime | read-write | current | The time delay period required to be met, between each consecutive occurences of this event. Traps recieved within this period will be dropped. |
| 1.3.6.1.4.1.45.1.6.4.2.11.1.8 | Columns5AgTrapEntryStatus | read-write | current | A manager is restricted to change the state of an entry base on the following table: create under To: valid Request Creation invalid From: valid OK NO OK OK cr… |
| 1.3.6.1.4.1.45.1.6.4.2.12 | Scalars5AgTrapFilterGlobalStatus | read-write | current | This value is the status of all the traps that supported by this trap-filter system. If the value is 1 (enable all) , all traps in the system are enabled. If t… |
| 1.3.6.1.4.1.45.1.6.4.2.13 | Scalars5AgUnAuthInetAddressType | read-only | current | This object indicates the type of address stored in the related object s5AgUnAuthInetAddress. |
| 1.3.6.1.4.1.45.1.6.4.2.14 | Scalars5AgUnAuthInetAddress | read-only | current | This object contains the IP address of the last station that tried to access this agent with an invalid community string. This object is used as a VarBind in a… |
| 1.3.6.1.4.1.45.1.6.4.3 | Nodes5AgentMgmt | |||
| 1.3.6.1.4.1.45.1.6.4.3.1 | Scalars5AgTrpRcvrMaxEnt | read-only | current | The maximum number of rows in the trap receiver table. |
| 1.3.6.1.4.1.45.1.6.4.3.2 | Scalars5AgTrpRcvrCurEnt | read-only | current | The current number of rows in the trap receiver table. |
| 1.3.6.1.4.1.45.1.6.4.3.3 | Scalars5AgTrpRcvrNext | read-only | current | The index of the next available row to be created in the trap receiver table. A value of zero means that the table is full and no more rows can be added. |
| 1.3.6.1.4.1.45.1.6.4.3.4 | Tables5AgTrpRcvrTable | not-accessible | current | A table of managers which to send traps. |
| 1.3.6.1.4.1.45.1.6.4.3.4.1 | Rows5AgTrpRcvrEntry | not-accessible | current | A row in the trap receiver table. The column s5AgTrpRcvrStatus is used to create and delete rows in the table. Creation requires a SET PDU with objects s5AgTrp… |
| 1.3.6.1.4.1.45.1.6.4.3.4.1.1 | Columns5AgTrpRcvrIndx | read-only | current | The index of the row in the table. |
| 1.3.6.1.4.1.45.1.6.4.3.4.1.2 | Columns5AgTrpRcvrStatus | read-write | current | This object is used to create and delete rows in the table and control if they are used. The values that can be written are: valid(2)....makes an existing row … |
| 1.3.6.1.4.1.45.1.6.4.3.4.1.3 | Columns5AgTrpRcvrAddrType | read-write | current | The type of address that is stored in the object s5AgTrpRcvrNetAddr. The value is: ip(1)....IP address ipx(2)...IPX address. Note: When changing the value of t… |
| 1.3.6.1.4.1.45.1.6.4.3.4.1.4 | Columns5AgTrpRcvrNetAddr | read-write | current | The network address (in network order) for SNMP manager that is to receive the trap. |
| 1.3.6.1.4.1.45.1.6.4.3.4.1.5 | Columns5AgTrpRcvrComm | read-write | current | Community string to use. |
| 1.3.6.1.4.1.45.1.6.4.3.4.1.6 | Columns5AgTrpRcvrAgeTime | read-write | current | The time interval used to age entries out of the trap receiver table. The default value if not specified will be 0, or infinite, never to be aged out. |
| 1.3.6.1.4.1.45.1.6.4.3.5 | Nodes5AgRemoteLoginMgmt | |||
| 1.3.6.1.4.1.45.1.6.4.3.5.1 | Scalars5AgRemoteLoginIp | read-only | current | This value indicates the last IP address remote login to this system. If the last such address is not an IPv4 address, the value will be 0.0.0.0. |
| 1.3.6.1.4.1.45.1.6.4.3.5.2 | Scalars5AgRemoteLoginStatus | read-only | current | This value indicates the status of remote login to this system. |
| 1.3.6.1.4.1.45.1.6.4.3.5.3 | Scalars5AgRemoteLoginInetAddressType | read-only | current | This value indicates the type of the last IP address remote login to this system. The indicates the type of address contained in s5AgRemoteLoginInetAddress. |
| 1.3.6.1.4.1.45.1.6.4.3.5.4 | Scalars5AgRemoteLoginInetAddress | read-only | current | This value indicates the last IP address remote login to this system. The type of address is specified in s5AgRemoteLoginInetAddressType. |
| 1.3.6.1.4.1.45.1.6.4.3.6 | Scalars5AgSnmpMaxPktSize | read-write | current | The maximum value of the SNMP packet size. |
| 1.3.6.1.4.1.45.1.6.4.4 | Nodes5AgentSystem | |||
| 1.3.6.1.4.1.45.1.6.4.4.1 | Scalars5AgSysAutoPvid | read-write | current | This value indicates whether adding a port as a member of a VLAN automatically results in its PVID being set to be the same as that VLAN ID. Some exceptions ap… |
| 1.3.6.1.4.1.45.1.6.4.4.2 | Scalars5AgSysCurrentOperationalMode | read-only | current | Indicates the stacking mode. Pure stack mode does not allow BS450 and BS410 units to join stack and provides some advanced features that are not available in H… |
| 1.3.6.1.4.1.45.1.6.4.4.3 | Scalars5AgSysNextBootOperationalMode | read-write | current | Indicates the stacking mode at the next boot. A change to this object will modify the stacking mode after the system is reset/rebooted. |
| 1.3.6.1.4.1.45.1.6.4.4.4 | Scalars5AgSysBinaryConfigFilename | read-write | current | Name of the binary configuration file that will be downloaded/uploaded when the s5AgInfoFileAction object is set to dnldConfig(2), upldConfig(4), dlndConfigFro… |
| 1.3.6.1.4.1.45.1.6.4.4.5 | Scalars5AgSysTftpServerAddress | read-write | current | The IP address of the TFTP server for all TFTP operations. If not used, then the value is 0.0.0.0. Further, if the value of s5AgTftpServerInetAddressType is no… |
| 1.3.6.1.4.1.45.1.6.4.4.6 | Scalars5AgSysAsciiConfigFilename | read-write | deprecated | Name of the ascii configuration file that will be downloaded/uploaded either at boot time when the s5AgSysAsciiConfigAutoDownload object is set to useConfig(3)… |
| 1.3.6.1.4.1.45.1.6.4.4.7 | Scalars5AgSysAsciiConfigAutoDownload | read-write | deprecated | Indicates whether an ASCII configuration file should be downloaded at boot time. The file can be downloaded using either the configured filename and TFTP serve… |
| 1.3.6.1.4.1.45.1.6.4.4.8 | Scalars5AgSysAsciiConfigAutoDldStatus | read-only | deprecated | Indicates the status of the last automatic ASCII configuration file download at boot time. If no automatic download at boot time has been attempted, the value … |
| 1.3.6.1.4.1.45.1.6.4.4.9 | Scalars5AgSysAsciiConfigManualDownload | read-write | deprecated | Indicates the status of the last manual attempt to download an ASCII configuration file. The value of this object when retrieved can be either passed(1), inPro… |
| 1.3.6.1.4.1.45.1.6.4.4.10 | Scalars5AgSysCpuIpAddress | read-write | current | The system's CPU IP address. Note that for a stackable system in standalone mode, this will be the standalone IP address, but in stack mode, this will be the s… |
| 1.3.6.1.4.1.45.1.6.4.4.11 | Scalars5AgSysStackIpAddress | read-write | current | The stack IP address of a stackable system. A non-stackable system should never return an instance of this object, nor allow writes to this object. Note that i… |
| 1.3.6.1.4.1.45.1.6.4.4.12 | Scalars5AgSysCpuNetMask | read-write | current | The system's CPU subnet mask. |
| 1.3.6.1.4.1.45.1.6.4.4.13 | Scalars5AgSysManagementVlanId | read-write | current | The VLAN ID of the system's management VLAN. |
| 1.3.6.1.4.1.45.1.6.4.4.14 | Scalars5AgSysBinaryConfigUnitNumber | read-write | current | When in standalone mode, and loading a binary configuration file that was created from a stack, this object specifies the unit number of the portion of the con… |
| 1.3.6.1.4.1.45.1.6.4.4.15 | Scalars5AgSysStackInsertionUnitNumber | read-write | current | When in stack mode, this object specifies the unit number to be assigned to the next unit that joins the stack. The value may not be set to the unit number of … |
| 1.3.6.1.4.1.45.1.6.4.4.16 | Scalars5AgSysSpanningTreeOperMode | read-only | current | This object indicates the current spanning-tree mode of the system. The meaning of specific values is: avayaStpg(1) .. The older proprietary mode which support… |
| 1.3.6.1.4.1.45.1.6.4.4.17 | Scalars5AgSysSpanningTreeAdminMode | read-write | current | This object indicates the desired spanning-tree mode of the system. The meaning of specific values is: avayaStpg(1) .. The older proprietary mode which support… |
| 1.3.6.1.4.1.45.1.6.4.4.18 | Scalars5AgSysAutoUnitReplacementEnabled | read-write | current | This object indicates whether the auto-unit-replacement feature is enabled or disabled. The value when retrieved will always be true(1) or false(2). Setting th… |
| 1.3.6.1.4.1.45.1.6.4.4.19 | Scalars5AgSysAsciiConfigManualUpload | read-write | deprecated | Indicates the status of the last manual attempt to upload an ASCII configuration file. The value of this object when retrieved can be either passed(1), inProgr… |
| 1.3.6.1.4.1.45.1.6.4.4.20 | Scalars5AgSysSpanningTreePathCostCalculationMode | read-write | current | This object indicates the current spanning-tree path cost calculation mode of the system. Note that this object can only take the value ieee802dot1dCompatible(… |
| 1.3.6.1.4.1.45.1.6.4.4.21 | Scalars5AgSysUsbTargetUnit | read-write | current | This object indicates the unit number of the USB port to be use in file upload/download operations. |
| 1.3.6.1.4.1.45.1.6.4.4.22 | Scalars5AgSysSpanningTreePortMode | read-write | current | This object indicates the current spanning-tree port mode. |
| 1.3.6.1.4.1.45.1.6.4.4.23 | Scalars5AgSysLicenseFilename | read-write | current | Name of the license file that will be downloaded/uploaded when the s5AgInfoFileAction object is set to dnldLicense(18), upldLicense(19), dlndLicenseFromUsb(20)… |
| 1.3.6.1.4.1.45.1.6.4.4.24 | Scalars5AgSysSpanningTreeAdminCompatibility | read-write | current | This object controls the compatibility mode for various features. Note that for some features, the actual operational mode might not change until after a syste… |
| 1.3.6.1.4.1.45.1.6.4.4.25 | Scalars5AgSysSpanningTreeOperCompatibility | read-only | current | This object indicates the operational compatibility mode for various features controlled by the associated object, s5AgSysSpanningTreeAdminCompatibility. |
| 1.3.6.1.4.1.45.1.6.4.4.26 | Scalars5AgSysGlobalFlowControlEnabled | read-write | current | This object controls whether flow control for ethernet ports is globally enabled or disabled. This object is only used on systems for which flow control cannot… |
| 1.3.6.1.4.1.45.1.6.4.4.27 | Scalars5AgSysAutosaveToNvramEnabled | read-write | current | This object controls whether autosaving to NVRAM is enabled. Autosaving normally occurs periodically in a background task if any configuration changes have bee… |
| 1.3.6.1.4.1.45.1.6.4.4.28 | Scalars5AgSysFlushMacAddrTableAll | read-write | current | Setting this object to flush(1) will flush the CDT MAC address table. Setting it to dynamic(2) will flush only dynamically learned addresses. Setting it to sta… |
| 1.3.6.1.4.1.45.1.6.4.4.29 | Scalars5AgSysFlushMacAddrTableByPortList | read-write | current | Setting this object will flush the CDT MAC address for all ports specified in the value. On retrieval, the value is the last value set, or a zero-length octet … |
| 1.3.6.1.4.1.45.1.6.4.4.30 | Scalars5AgSysFlushMacAddrTableByVlan | read-write | current | Setting this object will flush the CDT MAC address table for the specified VLAN. On retrieval, the value is the last value set, or 1 if it has never been set. |
| 1.3.6.1.4.1.45.1.6.4.4.31 | Scalars5AgSysFlushMacAddrTableByTrunk | read-write | current | Setting this object will flush the CDT MAC address table for the specified trunk. On retrieval, the value is the last value set, or 1 if it has never been set. |
| 1.3.6.1.4.1.45.1.6.4.4.32 | Scalars5AgSysFlushMacAddrTableByAddress | read-write | current | Setting this object will flush the specified MAC address from the CDT MAC address table. On retrieval, its value is the last value set, or 00:00:00:00:00:00 if… |
| 1.3.6.1.4.1.45.1.6.4.4.33 | Scalars5AgSysVlanConfigControl | read-write | current | This object controls the VLAN configuration control mode: automatic - AutoPVID and automatic change to membership of port-based VLANs autopvid flexible strict … |
| 1.3.6.1.4.1.45.1.6.4.4.34 | Scalars5AgSysJumboFramesEnabled | read-write | current | This object controls whether jumbo frames are supported. |
| 1.3.6.1.4.1.45.1.6.4.4.35 | Scalars5AgSysAutoUnitReplacementSaveEnabled | read-write | current | This object indicates whether auto-unit-replacement automatic saving of unit images to the base unit is enabled. |
| 1.3.6.1.4.1.45.1.6.4.4.36 | Scalars5AgSysAutoUnitReplacementRestore | read-write | current | This object is used to force the configuration of a unit to be restored from the saved configuration on the base unit. Setting the value to a unit number will … |
| 1.3.6.1.4.1.45.1.6.4.4.37 | Scalars5AgSysAutoUnitReplacementForceSave | read-write | current | This object is used to force the configuration of a non-base unit to be saved to the base unit. Setting it to a particular unit number will force the save of t… |
| 1.3.6.1.4.1.45.1.6.4.4.38 | Scalars5AgSysTftpServerInetAddressType | read-write | current | This object indicates the type of address stored in the related object s5AgSysTftpServerInetAddress. |
| 1.3.6.1.4.1.45.1.6.4.4.39 | Scalars5AgSysTftpServerInetAddress | read-write | current | This object contains the IP address of the TFTP server for all TFTP operations. |
| 1.3.6.1.4.1.45.1.6.4.4.40 | Scalars5AgSysTelnetSessionLoginAuthenType | read-write | current | This object controls the authentication method used for telnet session logins. The values of this object have the following meanings: none(1) local(2) to authe… |
| 1.3.6.1.4.1.45.1.6.4.4.41 | Scalars5AgSysSerialConsoleLoginAuthenType | read-write | current | This object controls the authentication method used for serial console logins. The values of this object have the following meanings: none(1) local(2) to authe… |
| 1.3.6.1.4.1.45.1.6.4.4.42 | Scalars5AgSysSshAuthKeyFilename | read-write | current | Name of the Ssh authentication key file that will be downloaded when the s5AgInfoFileAction object is set to dnldSshDsaAuthKeyFromUsb(23), dnldSshRsaAuthKeyFro… |
| 1.3.6.1.4.1.45.1.6.4.4.43 | Scalars5AgSysAsciiConfigManualUploadApplications | read-write | current | This objects is used to specify the set of applications to be included an an ASCII configure file when it is uploaded. |
| 1.3.6.1.4.1.45.1.6.4.4.44 | Scalars5AgSysOperationalLicense | read-only | current | The type of license currently in effect. |
| 1.3.6.1.4.1.45.1.6.4.4.45 | Scalars5AgSysInstalledLicense | read-only | current | The type of license currently installed. |
| 1.3.6.1.4.1.45.1.6.4.4.46 | Scalars5AgSysCpuIpv6Address | read-write | current | The system's CPU IPv6 address. Note that for a stackable system in standalone mode, this will be the standalone IPv6 address, but in stack mode, this will be t… |
| 1.3.6.1.4.1.45.1.6.4.4.47 | Scalars5AgSysStackIpv6Address | read-write | current | The stack IPv6 address of a stackable system. A non-stackable system should never return an instance of this object, nor allow writes to this object. Note that… |
| 1.3.6.1.4.1.45.1.6.4.4.48 | Scalars5AgSysCpuIpv6NetMask | read-write | current | The system's CPU IPv6 subnet mask. |
| 1.3.6.1.4.1.45.1.6.4.4.49 | Scalars5AgSysStackIpv6NetMask | read-write | current | The system's CPU IPv6 subnet mask. |
| 1.3.6.1.4.1.45.1.6.4.4.50 | Scalars5AgSysIpv6DefaultGateway | read-write | current | The system's IPv6 default gateway. |
| 1.3.6.1.4.1.45.1.6.4.4.51 | Scalars5AgSysSpanningTreeBpduFilterIgnoreSelf | read-write | current | This object indicates if bridge's own BPDUs should be ignored or not when BPDU FIltering decisions are made. If the value is set to true, bridge's own BPDUs ar… |
| 1.3.6.1.4.1.45.1.6.4.4.52 | Scalars5AgSysIdentifyUnits | read-write | current | This object is used to tell a stackable system to identify the numbering of units in the stack by flashing the appropriate number of LEDs on the front panel of… |
| 1.3.6.1.4.1.45.1.6.4.4.53 | Scalars5AgSysMacAddrTableLearningPorts | read-write | current | This object controls the list of ports on which MAC address learning is enabled. |
| 1.3.6.1.4.1.45.1.6.4.4.54 | Scalars5AgSysSerialSecurityEnable | read-write | current | This object enables/disables the serial security feature. |
| 1.3.6.1.4.1.45.1.6.4.4.55 | Scalars5AgSysMgmtStackIpAddress | read-write | current | The management stack IP address of a stackable system. This address applies to the out-of-band, dedicated management ports. Its counterpart for in-band access … |
| 1.3.6.1.4.1.45.1.6.4.4.56 | Scalars5AgSysAuditEnable | read-write | current | This object enables/disables CLI audit logging. |
| 1.3.6.1.4.1.45.1.6.4.4.57 | Scalars5AgSysQuickConfigEnable | read-write | current | This object enables/disables quick config. |
| 1.3.6.1.4.1.45.1.6.4.4.58 | Scalars5AgSysStackIpv6MgmtAddress | read-write | current | The stack IP address of a stackable system. A non-stackable system should never return an instance of this object, nor allow writes to this object. Note that i… |
| 1.3.6.1.4.1.45.1.6.4.4.59 | Scalars5AgSysStackIpv6MgmtNetMask | read-write | current | The stack IP address of a stackable system. A non-stackable system should never return an instance of this object, nor allow writes to this object. Note that i… |
| 1.3.6.1.4.1.45.1.6.4.4.60 | Scalars5AgSysIpv6MgmtGateway | read-write | current | The IP address of the default gateway associated with the physical dedicated management port (out of band management port) of a component. |
| 1.3.6.1.4.1.45.1.6.4.4.61 | Scalars5AgSysBlinkLeds | read-write | current | This object is used to start or stop the flashing of LEDs from the front panel of a unit. When setting the object, s5AgSysBlinkLedsUnit specifies the unit numb… |
| 1.3.6.1.4.1.45.1.6.4.4.62 | Scalars5AgSysBlinkLedsUnit | read-write | current | This object specifies the unit number used in the blink-leds action. |
| 1.3.6.1.4.1.45.1.6.4.4.63 | Scalars5AgSysBlinkLedsTimeThreshold | read-write | current | This object specifies the time threshold used in the blink-leds action. |
| 1.3.6.1.4.1.45.1.6.4.4.64 | Scalars5AgSysJumboFramesSize | read-write | current | This object represents the maximum Ethernet frame size to be used when jumbo frames are supported & enabled ( see s5AgSysJumboFramesEnabled ). Default settings… |
| 1.3.6.1.4.1.45.1.6.4.4.65 | Scalars5AgSysDiagnosticsQuickModeEnabled | read-write | current | This object controls diagnostics tests mode at boot sequence. |
| 1.3.6.1.4.1.45.1.6.4.4.66 | Scalars5AgSysTimeStampEnabled | read-write | current | This object indicates whether the UTC stamp is displayed in 'show *' output or not. A TRUE(1) value means that the time stamp is displayed, a FALSE(2) value in… |
| 1.3.6.1.4.1.45.1.6.4.4.67 | Scalars5AgSysForcedStackModeEnabled | read-write | current | This object indicates whether the Forced Stack Mode feature is enabled. |
| 1.3.6.1.4.1.45.1.6.4.4.68 | Scalars5AgSysSflowGlobalEnable | read-write | current | This object globally enables or disables sflow. |
| 1.3.6.1.4.1.45.1.6.4.5 | Nodes5AgentBanner | |||
| 1.3.6.1.4.1.45.1.6.4.5.1 | Scalars5AgBannerControl | read-write | current | s5AgBannerControl specifies the banner to be displayed to a user upon connection to a Baystack device. The static(1) option will cause the predefined static ba… |
| 1.3.6.1.4.1.45.1.6.4.5.2 | Tables5AgCustomBannerTable | not-accessible | current | Table describing a custom banner to be displayed to users upon the establishment of a connection to a Baystack device. The banner can be upto 15 lines of text … |
| 1.3.6.1.4.1.45.1.6.4.5.2.1 | Rows5AgCustomBannerEntry | not-accessible | current | An entry describing one line of a 15-line banner. |
| 1.3.6.1.4.1.45.1.6.4.5.2.1.1 | Columns5AgCustomBannerType | not-accessible | current | Identifies the banner type. The table can store 2 separate banners, one for use in switch/stand-alone mode (with a type of switch(1)), and one for use in stack… |
| 1.3.6.1.4.1.45.1.6.4.5.2.1.2 | Columns5AgCustomBannerId | not-accessible | current | Identifies the line of text within a custom banner. |
| 1.3.6.1.4.1.45.1.6.4.5.2.1.3 | Columns5AgCustomBannerLine | read-write | current | One line of a fifteen line banner. If the line contains non-printable ASCII characters then the string will be rejected and an error response returned. |
| 1.3.6.1.4.1.45.1.6.4.6 | Nodes5AgentSntp | |||
| 1.3.6.1.4.1.45.1.6.4.6.1 | Scalars5AgSntpState | read-write | current | This object is used to control whether the device uses the Simple Network Time Protocol (SNTP), to synchronize the device's clock to the Coordinated Universal … |
| 1.3.6.1.4.1.45.1.6.4.6.2 | Scalars5AgSntpPrimaryServerAddress | read-write | current | The IPv4 address of the primary SNTP server. If this value is 0.0.0.0, refer to the values of these objects: s5AgSntpPrimaryServerInetAddressType s5AgSntpPrima… |
| 1.3.6.1.4.1.45.1.6.4.6.3 | Scalars5AgSntpSecondaryServerAddress | read-write | current | The IPv4 address of the secondary SNTP server. If this value is 0.0.0.0, refer to the values of these objects: s5AgSntpSecondaryServerInetAddressType s5AgSntpS… |
| 1.3.6.1.4.1.45.1.6.4.6.4 | Scalars5AgSntpSyncInterval | read-write | current | This object controls the frequency, in hours relative to s5AgSntpLastSyncTime, that the device will attempt to synchronize with the NTP servers. If this value … |
| 1.3.6.1.4.1.45.1.6.4.6.5 | Scalars5AgSntpManualSyncRequest | read-write | current | This object is used to force the device to immediately attempt to synchronize with the NTP servers. The value returned on a get is always requestSync(1). |
| 1.3.6.1.4.1.45.1.6.4.6.6 | Scalars5AgSntpLastSyncTime | read-only | current | This object returns the Coordinated Universal Time (UTC) when the device last synchronized with an NTP server. If the device has never successfully synchronize… |
| 1.3.6.1.4.1.45.1.6.4.6.7 | Scalars5AgSntpLastSyncSource | read-only | current | This object returns the IPv4 source address of the NTP server with which this device last synchronized. If the value of this object is 0.0.0.0, refer to the va… |
| 1.3.6.1.4.1.45.1.6.4.6.8 | Scalars5AgSntpNextSyncTime | read-only | current | This object returns the Coordinated Universal Time (UTC) at which the next synchronization is scheduled. For each synchronization attempt, this value is update… |
| 1.3.6.1.4.1.45.1.6.4.6.9 | Scalars5AgSntpPrimaryServerSyncFailures | read-only | current | This object returns the number of times this device failed to synchronize with the primary, s5AgSntpPrimaryServerAddress, NTP server. Synchronization with the … |
| 1.3.6.1.4.1.45.1.6.4.6.10 | Scalars5AgSntpSecondaryServerSyncFailures | read-only | current | This object returns the number of times this device failed to synchronize with the secondary, s5AgSntpSecondaryServerAddress, NTP server. |
| 1.3.6.1.4.1.45.1.6.4.6.11 | Scalars5AgSntpCurrentTime | read-only | current | This object returns the device's current Coordinated Universal Time (UTC). If the device has not successfully synchronized with an NTP server, this value will … |
| 1.3.6.1.4.1.45.1.6.4.6.12 | Scalars5AgSntpTimeZone | read-write | current | This object specifies the time zone of the switch, measured as an offset in 15-minute increments from Greenwich Mean Time (GMT). For example, a value of -20 me… |
| 1.3.6.1.4.1.45.1.6.4.6.13 | Scalars5AgSntpSyncRetryInterval | read-write | current | This object specifies the number of seconds the switch will wait before retrying a failed SNTP sync request. The switch will continue retrying a sync request u… |
| 1.3.6.1.4.1.45.1.6.4.6.14 | Scalars5AgSntpTimeZoneAcronym | read-write | current | This object contains a time zone acronym. It is not used for any operational purposes, it is only used for display. |
| 1.3.6.1.4.1.45.1.6.4.6.15 | Scalars5AgSntpPrimaryServerInetAddressType | read-write | current | The type of internet address contained in the object s5AgSntpPrimaryServerInetAddress. Together, these two objects specify the IP address of the primary SNTP s… |
| 1.3.6.1.4.1.45.1.6.4.6.16 | Scalars5AgSntpPrimaryServerInetAddress | read-write | current | The IP address of the primary SNTP server. |
| 1.3.6.1.4.1.45.1.6.4.6.17 | Scalars5AgSntpSecondaryServerInetAddressType | read-write | current | The type of internet address contained in the object s5AgSntpSecondaryServerInetAddress. Together, these two objects specify the IP address of the secondary SN… |
| 1.3.6.1.4.1.45.1.6.4.6.18 | Scalars5AgSntpSecondaryServerInetAddress | read-write | current | The IP address of the secondary SNTP server. |
| 1.3.6.1.4.1.45.1.6.4.6.19 | Scalars5AgSntpLastSyncSourceInetAddressType | read-only | current | The type of internet address contained in the object s5AgSntpLastSyncSourceInetAddress. Together, these two objects specify the IP address of the NTP server wi… |
| 1.3.6.1.4.1.45.1.6.4.6.20 | Scalars5AgSntpLastSyncSourceInetAddress | read-only | current | The IP source address of the NTP server with which this device last synchronized. |
| 1.3.6.1.4.1.45.1.6.4.7 | Nodes5AgentSsl | |||
| 1.3.6.1.4.1.45.1.6.4.7.1 | Nodes5AgentSslScalars | |||
| 1.3.6.1.4.1.45.1.6.4.7.1.1 | Scalars5AgSslEnabled | read-write | current | This object indicates whether SSL is enabled or disabled. |
| 1.3.6.1.4.1.45.1.6.4.7.1.3 | Scalars5AgSslCertificateControl | read-write | current | This object is used to create and delete SSL certificates. Setting the value to create(1) will create an SSL certificate. Setting the value to delete(2) will d… |
| 1.3.6.1.4.1.45.1.6.4.7.1.4 | Scalars5AgSslCertificateExists | read-write | current | This object indicates whether a valid SSL certificate has been created. A valid of true(1) indicates that a valid certificate has been created. A value of fals… |
| 1.3.6.1.4.1.45.1.6.4.7.1.5 | Scalars5AgSslCertificateData | read-write | current | This object returns data about the SSL certificate currently in use. Note that the actual certificate data may be longer than the 1024 bytes allowed in this ob… |
| 1.3.6.1.4.1.45.1.6.4.7.1.6 | Scalars5AgSslCertificateControlStatus | read-only | current | This object indicates the status of the most recent attempt to create or delete a certificate, i.e., the most recent set of the s5AgSslCertificateControl objec… |
| 1.3.6.1.4.1.45.1.6.4.7.1.7 | Scalars5AgSslServerControl | read-write | current | This object is used to reset the SSL server, forcing the server to use the latest key value that was stored in NVRAM. Note that the server cannot be reset whil… |
| 1.3.6.1.4.1.45.1.6.4.8 | Identitys5AgentMib | S5000 Agent MIB Copyright 1995 - 2015 Avaya, Inc. All rights reserved. This Bay Networks SNMP Management Information Base Specification (Specification) embodie… | ||
| 1.3.6.1.4.1.45.1.6.4.9 | Nodes5AgentDaylightSavings | |||
| 1.3.6.1.4.1.45.1.6.4.9.1 | Scalars5AgDaylightSavingsEnabled | read-write | current | This object indicates whether the device will observe Daylight Savings Time. |
| 1.3.6.1.4.1.45.1.6.4.9.2 | Scalars5AgDaylightSavingsStartMonth | read-write | current | This object specifies the month of each year when Daylight Savings time will start. |
| 1.3.6.1.4.1.45.1.6.4.9.3 | Scalars5AgDaylightSavingsStartDay | read-write | current | This object specifies the day of the month indicated by s5AgDaylightSavingsStartMonth when Daylight Savings time will start. |
| 1.3.6.1.4.1.45.1.6.4.9.4 | Scalars5AgDaylightSavingsStartHour | read-write | current | This object specifies the hour of the day indicated by s5AgDaylightSavingsStartDay when Daylight Savings time will start. |
| 1.3.6.1.4.1.45.1.6.4.9.5 | Scalars5AgDaylightSavingsEndMonth | read-write | current | This object specifies the month of each year when Daylight Savings time will end. |
| 1.3.6.1.4.1.45.1.6.4.9.6 | Scalars5AgDaylightSavingsEndDay | read-write | current | This object specifies the day of the month indicated by s5AgDaylightSavingsEndMonth when Daylight Savings time will end. |
| 1.3.6.1.4.1.45.1.6.4.9.7 | Scalars5AgDaylightSavingsEndHour | read-write | current | This object specifies the hour of the day indicated by s5AgDaylightSavingsEndDay when Daylight Savings time will end. |
| 1.3.6.1.4.1.45.1.6.4.9.8 | Scalars5AgDaylightSavingsOffset | read-write | current | This object specifies the number of minutes by which the time will be changed when daylight savings begins and ends. This value is added to the current time wh… |
| 1.3.6.1.4.1.45.1.6.4.9.9 | Scalars5AgDaylightSavingsStartMinutes | read-write | current | This object specifies the minutes of the hour indicated by s5AgDaylightSavingsStartHour when Daylight Savings time will start. |
| 1.3.6.1.4.1.45.1.6.4.9.10 | Scalars5AgDaylightSavingsEndMinutes | read-write | current | This object specifies the minutes of the hour indicated by s5AgDaylightSavingsEndHour when Daylight Savings time will end. |
| 1.3.6.1.4.1.45.1.6.4.9.11 | Scalars5AgDaylightSavingsStartYear | read-write | current | This object specifies the year when Daylight Savings time will start. This is only used when the value of s5AgDaylightSavingsRecurring is false(2). |
| 1.3.6.1.4.1.45.1.6.4.9.12 | Scalars5AgDaylightSavingsEndYear | read-write | current | This object specifies the year when Daylight Savings time will end. This is only used when the value of s5AgDaylightSavingsRecurring is false(2). |
| 1.3.6.1.4.1.45.1.6.4.9.13 | Scalars5AgDaylightSavingsRecurring | read-write | current | This object specifies whether the Daylight Savings start and end times are yearly reoccuring times, or a single occurrence on specific dates. If the value is t… |
| 1.3.6.1.4.1.45.1.6.4.9.14 | Scalars5AgDaylightSavingsTimeZoneAcronym | read-write | current | This object contains a time zone acronym. It is not used for any operational purposes, it is only used for display. |
| 1.3.6.1.4.1.45.1.6.4.9.15 | Scalars5AgDaylightSavingsRecurringStartWeek | read-write | current | This object specifies the week of the month when Daylight Savings time will start. A value of -1 means the last week of the month. This object is only used whe… |
| 1.3.6.1.4.1.45.1.6.4.9.16 | Scalars5AgDaylightSavingsRecurringStartDay | read-write | current | This object specifies the day of the week when Daylight Savings time will start. This is only used when the value of s5AgDaylightSavingsRecurring is true(1). |
| 1.3.6.1.4.1.45.1.6.4.9.17 | Scalars5AgDaylightSavingsRecurringStartMonth | read-write | current | This object specifies the month when Daylight Savings time will start. This is only used when the value of s5AgDaylightSavingsRecurring is true(1). |
| 1.3.6.1.4.1.45.1.6.4.9.18 | Scalars5AgDaylightSavingsRecurringStartHour | read-write | current | This object specifies the hour when Daylight Savings time will start. This is only used when the value of s5AgDaylightSavingsRecurring is true(1). |
| 1.3.6.1.4.1.45.1.6.4.9.19 | Scalars5AgDaylightSavingsRecurringStartMinute | read-write | current | This object specifies the minute when Daylight Savings time will start. This is only used when the value of s5AgDaylightSavingsRecurring is true(1). |
| 1.3.6.1.4.1.45.1.6.4.9.20 | Scalars5AgDaylightSavingsRecurringEndWeek | read-write | current | This object specifies the week of the month when Daylight Savings time will end. A value of -1 means the last week of the month. This object is only used when … |
| 1.3.6.1.4.1.45.1.6.4.9.21 | Scalars5AgDaylightSavingsRecurringEndDay | read-write | current | This object specifies the day of the week when Daylight Savings time will end. This is only used when the value of s5AgDaylightSavingsRecurring is true(1). |
| 1.3.6.1.4.1.45.1.6.4.9.22 | Scalars5AgDaylightSavingsRecurringEndMonth | read-write | current | This object specifies the month when Daylight Savings time will end. This is only used when the value of s5AgDaylightSavingsRecurring is true(1). |
| 1.3.6.1.4.1.45.1.6.4.9.23 | Scalars5AgDaylightSavingsRecurringEndHour | read-write | current | This object specifies the hour when Daylight Savings time will end. This is only used when the value of s5AgDaylightSavingsRecurring is true(1). |
| 1.3.6.1.4.1.45.1.6.4.9.24 | Scalars5AgDaylightSavingsRecurringEndMinute | read-write | current | This object specifies the minute when Daylight Savings time will end. This is only used when the value of s5AgDaylightSavingsRecurring is true(1). |
| 1.3.6.1.4.1.45.1.6.4.9.25 | Scalars5AgDaylightSavingsRecurringOffset | read-write | current | This object specifies the offset when Daylight Savings time will end. This is only used when the value of s5AgDaylightSavingsRecurring is true(1). |
| 1.3.6.1.4.1.45.1.6.4.10 | Nodes5AgentBootConfig | |||
| 1.3.6.1.4.1.45.1.6.4.10.1 | Nodes5AgentBootConfigScalars | |||
| 1.3.6.1.4.1.45.1.6.4.10.1.1 | Scalars5AgBootCfgSaveToBlock | read-write | current | This object is used to force the current running configuration to be saved to a particular configuration block. Setting the object to a value corresponding to … |
| 1.3.6.1.4.1.45.1.6.4.10.1.2 | Scalars5AgBootCfgNextBootBlock | read-write | current | This object specifies the configuration block that is configured to be used at the next boot. Setting this object may cause the system to reset. If this object… |
| 1.3.6.1.4.1.45.1.6.4.10.1.3 | Scalars5AgBootCfgCurrentBootBlock | read-only | current | This object returns the configuration block that was used when the system last booted. |
| 1.3.6.1.4.1.45.1.6.4.10.2 | Tables5AgBootCfgBlocksTable | not-accessible | current | This table contains an entry for each available configuration boot block. |
| 1.3.6.1.4.1.45.1.6.4.10.2.1 | Rows5AgBootCfgBlocksEntry | not-accessible | current | An entry describing one configuration boot block. |
| 1.3.6.1.4.1.45.1.6.4.10.2.1.1 | Columns5AgBootCfgBlocksIndex | not-accessible | current | Index of the table, this is the block number. |
| 1.3.6.1.4.1.45.1.6.4.10.2.1.2 | Columns5AgBootCfgBlocksName | read-write | current | The name of the configuration boot block. |
| 1.3.6.1.4.1.45.1.6.4.10.2.1.3 | Columns5AgBootCfgBlocksTime | read-only | current | The time when the configuration block was last saved. Note that if configuration data has never been saved to this block, the value will contain all 0 value by… |
| 1.3.6.1.4.1.45.1.6.4.10.2.1.4 | Columns5AgBootCfgBlocksValid | read-only | current | This object indicates whether the configuration block contains a valid configuration. |
| 1.3.6.1.4.1.45.1.6.4.11 | Nodes5AgentAsciiConfig | |||
| 1.3.6.1.4.1.45.1.6.4.11.1 | Tables5AgAsciiConfigScriptTable | not-accessible | current | A table of paths to ASCII configuration script files. |
| 1.3.6.1.4.1.45.1.6.4.11.1.1 | Rows5AgAsciiConfigScriptEntry | not-accessible | current | A row in the ASCII configuration file paths table. |
| 1.3.6.1.4.1.45.1.6.4.11.1.1.1 | Columns5AgAsciiConfigScriptIndex | not-accessible | current | The index of an ASCII confiuration script file path. |
| 1.3.6.1.4.1.45.1.6.4.11.1.1.2 | Columns5AgAsciiConfigScriptBootPriority | read-write | current | A value between 1-127 indicates the priority with which the entry will be used at bootup. Entries with lower values will be used before entries with higher val… |
| 1.3.6.1.4.1.45.1.6.4.11.1.1.3 | Columns5AgAsciiConfigScriptSource | read-write | current | The source of the script. This is an ASCII string similar to a URL, and must be in one of the following formats: - 'bootp://' - the source of the script will b… |
| 1.3.6.1.4.1.45.1.6.4.11.1.1.4 | Columns5AgAsciiConfigScriptManual | read-write | current | This object is used to manually download and run a script, or to upload the current configuration. Setting it to download(2) will force the script to be loaded… |
| 1.3.6.1.4.1.45.1.6.4.11.1.1.5 | Columns5AgAsciiConfigScriptOperStatus | read-only | current | This object indicates the current operational status of this entry. The value will reflect the status of the last operation performed using a particular entry.… |
| 1.3.6.1.4.1.45.1.6.4.11.1.1.6 | Columns5AgAsciiConfigScriptLastStatusChange | read-only | current | The value of snmpEngineTime at the time of the last status change of this entry, i.e., the last time the value of the corresponding instance of s5AgAsciiConfig… |
| 1.3.6.1.4.1.45.1.6.4.11.1.1.7 | Columns5AgAsciiConfigScriptUploadApplications | read-write | current | This objects is used to specify the set of applications to be included an an ASCII configuration file when it is uploaded. |
| 1.3.6.1.4.1.45.1.6.4.12 | Nodes5AgentLicense | |||
| 1.3.6.1.4.1.45.1.6.4.12.1 | Tables5AgentLicenseTable | not-accessible | current | A table of information about software licenses. |
| 1.3.6.1.4.1.45.1.6.4.12.1.1 | Rows5AgentLicenseEntry | not-accessible | current | Information about a software license. |
| 1.3.6.1.4.1.45.1.6.4.12.1.1.1 | Columns5AgentLicenseIndex | not-accessible | current | The index of license file which now can vary between 0 and 9, a total of 10 licenses. |
| 1.3.6.1.4.1.45.1.6.4.12.1.1.2 | Columns5AgentLicenseType | read-only | current | License type/level. |
| 1.3.6.1.4.1.45.1.6.4.12.1.1.3 | Columns5AgentLicenseVersion | read-only | current | License data version. |
| 1.3.6.1.4.1.45.1.6.4.12.1.1.4 | Columns5AgentLicenseMd5Key | read-only | current | MD5 Digest of encryption key. |
| 1.3.6.1.4.1.45.1.6.4.12.1.1.5 | Columns5AgentLicenseMd5File | read-only | current | MD5 Digest of entire license file. |
| 1.3.6.1.4.1.45.1.6.4.12.1.1.6 | Columns5AgentLicenseTimeBase | read-only | current | Time field used for time limited licenses. |
| 1.3.6.1.4.1.45.1.6.4.12.1.1.7 | Columns5AgentLicenseTimeModify | read-only | current | Time field used for time limited licenses. |
| 1.3.6.1.4.1.45.1.6.4.12.1.1.8 | Columns5AgentLicenseTimeExpiration | read-only | current | Time field used for time limited licenses. Shows the expiring date of the current license. |
| 1.3.6.1.4.1.45.1.6.4.12.1.1.9 | Columns5AgentLicenseNumUniqueIds | read-only | current | Number of unique IDs(MAC addresses) associated with license. |
| 1.3.6.1.4.1.45.1.6.4.12.1.1.10 | Columns5AgentLicenseFlags | read-only | current | Flags to indicate license type/functionality. |
| 1.3.6.1.4.1.45.1.6.4.12.1.1.11 | Columns5AgentLicenseMemo | read-only | current | Memo field to allow text message to be added. |
| 1.3.6.1.4.1.45.1.6.4.12.1.1.12 | Columns5AgentLicenseStatus | read-write | current | This object specifies the status of a license. At retrieval, the status is set to active(1). When setting the remove(2) value, the object deletes the specified… |
| 1.3.6.1.4.1.45.1.6.4.13 | Nodes5AgentScript | |||
| 1.3.6.1.4.1.45.1.6.4.13.1 | Tables5AgentScriptTable | not-accessible | current | A table of information about agent scripts. |
| 1.3.6.1.4.1.45.1.6.4.13.1.1 | Rows5AgentScriptEntry | not-accessible | current | A row in the agent script table. |
| 1.3.6.1.4.1.45.1.6.4.13.1.1.1 | Columns5AgentScriptIndex | not-accessible | current | The index of an agent script. |
| 1.3.6.1.4.1.45.1.6.4.13.1.1.2 | Columns5AgentScriptParameters | read-write | current | This object is used to specify the agent script parameters, as strings separated by ';' character. If the string for a parameter is left empty (e.g '42;;255.25… |
| 1.3.6.1.4.1.45.1.6.4.13.1.1.3 | Columns5AgentScriptStatus | read-only | current | The status of an agent script. |
| 1.3.6.1.4.1.45.1.6.4.13.1.1.4 | Columns5AgentScriptRun | read-write | current | This object runs a script. When setting default(1) value, the script runs its default configuration. When setting the verbose(2) value, the script runs the par… |
| 1.3.6.1.4.1.45.1.6.4.14 | Nodes5AgentClock | |||
| 1.3.6.1.4.1.45.1.6.4.14.1 | Scalars5AgClockSystemTime | read-only | current | System current time. |
| 1.3.6.1.4.1.45.1.6.4.14.2 | Scalars5AgClockRtcSyncWithNtp | read-write | current | Specifies whether the RTC should synchronize with (S)NTP. |
| 1.3.6.1.4.1.45.1.6.4.14.3 | Scalars5AgClockSource | read-write | current | Specifies the clock source. |
| 1.3.6.1.4.1.45.1.6.4.14.4 | Scalars5AgClockNtpTime | read-only | current | NTP time. |
| 1.3.6.1.4.1.45.1.6.4.14.5 | Scalars5AgClockSntpTime | read-only | current | SNTP time. |
| 1.3.6.1.4.1.45.1.6.4.14.6 | Scalars5AgClockRtcTime | read-write | current | RTC time. |