S5-SWITCH-BAYSECURE-MIB
68 objects
BaySecure MIB - MAC-based Security MIB Copyright 1999-2012 Avaya All rights reserved. This Avaya SNMP Management Information Base Specification (Specification) embodies Avaya's confidential and proprietary intellectual property. Avaya retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Avaya makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Imported Objects
| S5-ROOT-MIB | s5Com |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | MacAddress TEXTUAL-CONVENTION TimeInterval TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.1.6.5.3 | Identitys5SbsAuth | BaySecure MIB - MAC-based Security MIB Copyright 1999-2012 Avaya All rights reserved. This Avaya SNMP Management Information Base Specification (Specification)… | ||
| 1.3.6.1.4.1.45.1.6.5.3.1 | Scalars5SbsAuthSecurityLock | read-only | current | If s5SbsAuthSecurityLock is locked(2), the agent will refuse all requests to modify the 'security configuration'. Objects in s5SbsAuth, the Switch BaySecure MI… |
| 1.3.6.1.4.1.45.1.6.5.3.2 | Scalars5SbsAuthCtlPartTime | read-write | current | If the value of s5SbsAuthCfgActionMode is partitionPort or partitionPortAndSendTrap, time partition will be done if this value is greater than 0. The value ind… |
| 1.3.6.1.4.1.45.1.6.5.3.3 | Scalars5SbsSecurityStatus | read-write | current | Indicates whether the switch security feature is enabled or not. |
| 1.3.6.1.4.1.45.1.6.5.3.4 | Scalars5SbsSecurityMode | read-write | current | The mode of switch security. singleMACperPort(1) indicates that the switch is in single-MAC-per-port mode which means it allows to configure only one MAC addre… |
| 1.3.6.1.4.1.45.1.6.5.3.5 | Scalars5SbsSecurityAction | read-write | current | Action performed by software when a violation occurs (if s5SbsSecurityStatus is enabled). The security action specified here applies to all ports of the switch… |
| 1.3.6.1.4.1.45.1.6.5.3.6 | Scalars5SbsCurrNodesAllowed | read-only | current | The current number of entries of the nodes allowed in the s5SbsAuthCfgTable. |
| 1.3.6.1.4.1.45.1.6.5.3.7 | Scalars5SbsMaxNodesAllowed | read-only | current | The maximum number of entries of the nodes allowed in the s5SbsAuthCfgTable. |
| 1.3.6.1.4.1.45.1.6.5.3.8 | Scalars5SbsCurrNodesBlocked | read-only | current | The current number of entries of the nodes blocked in the s5SbsAuthCfgTable. |
| 1.3.6.1.4.1.45.1.6.5.3.9 | Scalars5SbsMaxNodesBlocked | read-only | current | The maximum number of entries of the nodes blocked in the s5SbsAuthCfgTable. |
| 1.3.6.1.4.1.45.1.6.5.3.10 | Tables5SbsAuthCfgTable | not-accessible | current | A table containing a list of boards and ports and MAC addresses that constitute the security configuration. |
| 1.3.6.1.4.1.45.1.6.5.3.10.1 | Rows5SbsAuthCfgEntry | not-accessible | current | An entry in this table indicates the security configuration for a specified MAC address and a specified port and a specified board. A SNMP SET PDU for a row of… |
| 1.3.6.1.4.1.45.1.6.5.3.10.1.1 | Columns5SbsAuthCfgBrdIndx | read-only | current | The index of the slot containing the board on which the port is located. This value is meaningful only if s5SbsAuthCfgSecureList value is zero. For other Secur… |
| 1.3.6.1.4.1.45.1.6.5.3.10.1.2 | Columns5SbsAuthCfgPortIndx | read-only | current | The index of the port on the board. This value is meaningful only if s5SbsAuthCfgSecureList value is zero. For other SecureList values it should have the value… |
| 1.3.6.1.4.1.45.1.6.5.3.10.1.3 | Columns5SbsAuthCfgMACIndx | read-only | current | The index of source MAC address of allowed station or not-allowed station. |
| 1.3.6.1.4.1.45.1.6.5.3.10.1.4 | Columns5SbsAuthCfgAccessCtrlType | read-write | current | This Node Access Control Type represents whether the node entry is node allowed or node blocked type. A MAC address may be allowed on multiple ports. |
| 1.3.6.1.4.1.45.1.6.5.3.10.1.5 | Columns5SbsAuthCfgStatus | read-write | current | The status of the AuthCfg entry. The primary use of this object is for modifying the AuthCfg table. Values that can be written create(2), delete(3), modify(4).… |
| 1.3.6.1.4.1.45.1.6.5.3.10.1.6 | Columns5SbsAuthCfgSecureList | read-write | current | The index of the security list. This value is meaningful only if s5SbsAuthCfgBrdIndx and s5SbsAuthCfgPortIndx values are zero. For other board and port index v… |
| 1.3.6.1.4.1.45.1.6.5.3.10.1.7 | Columns5SbsAuthCfgSource | read-only | current | This object indicates the source of an entry. A value of static(1) indicates that the entry was manually created by a user. A value of autoLearn(2) indicates t… |
| 1.3.6.1.4.1.45.1.6.5.3.10.1.8 | Columns5SbsAuthCfgLifetime | read-only | current | This object indicates the lifetime of an auto-learned entry. This is the time until the entry is automatically deleted by the system. This object does not appl… |
| 1.3.6.1.4.1.45.1.6.5.3.10.1.9 | Columns5SbsAuthCfgTrunk | read-write | current | The trunk on which a MAC address is allowed or disallowed. This value must be 0 if the value of any of these objects is non-zero: s5SbsAuthCfgBrdIndx s5SbsAuth… |
| 1.3.6.1.4.1.45.1.6.5.3.11 | Tables5SbsAuthStatusTable | not-accessible | current | A table containing a snapshot of the authorized boards and ports status data collection. Port security information consists of an action to be performed when a… |
| 1.3.6.1.4.1.45.1.6.5.3.11.1 | Rows5SbsAuthStatusEntry | not-accessible | current | An entry in this table may represent a single MAC address, all MAC addresses on a single port, a single port, all the ports on a single board, a particuler por… |
| 1.3.6.1.4.1.45.1.6.5.3.11.1.1 | Columns5SbsAuthStatusBrdIndx | read-only | current | The index of the board. This corresponds to the index of the slot containing the board if the index is greater than zero. A zero index is a wild card. |
| 1.3.6.1.4.1.45.1.6.5.3.11.1.2 | Columns5SbsAuthStatusPortIndx | read-only | current | The index of the port on the board. This corresponds to the index of the last manageable port on the board if the index is greater than zero. A zero index is a… |
| 1.3.6.1.4.1.45.1.6.5.3.11.1.3 | Columns5SbsAuthStatusMACIndx | read-only | current | The index of MAC address on the port. This corresponds to the index of the MAC address on the port if the index is greater than zero. A zero index is a wild ca… |
| 1.3.6.1.4.1.45.1.6.5.3.11.1.4 | Columns5SbsCurrentAccessCtrlType | read-only | current | This Node Access Control Type represents whether the node entry is node allowed or node blocked type. |
| 1.3.6.1.4.1.45.1.6.5.3.11.1.5 | Columns5SbsCurrentActionMode | read-only | current | An integer value representing the type of information contained in this s5SbsAuthStatusEntry. noAction(1) represents that port does not have any security assig… |
| 1.3.6.1.4.1.45.1.6.5.3.11.1.6 | Columns5SbsCurrentPortSecurStatus | read-only | current | This represents the current port security status. If s5SbsSecurityStatus is disable, notApplicable(1) will be returned. The port in a normal situation returns … |
| 1.3.6.1.4.1.45.1.6.5.3.12 | Tables5SbsViolationStatusTable | not-accessible | current | A table containing a list of boards, ports where network access violations have occurred. Information also contains the offending MAC addrersses. |
| 1.3.6.1.4.1.45.1.6.5.3.12.1 | Rows5SbsViolationStatusEntry | not-accessible | current | An entry in this table |
| 1.3.6.1.4.1.45.1.6.5.3.12.1.1 | Columns5SbsViolationStatusBrdIndx | read-only | current | The index of the board. This corresponds to the slot containing the board. This index will be 1 where it is not applicable, e.g., ByaStack 303/304. |
| 1.3.6.1.4.1.45.1.6.5.3.12.1.2 | Columns5SbsViolationStatusPortIndx | read-only | current | The index of the port on the board. This corresponds to the port on which a security violation was seen. |
| 1.3.6.1.4.1.45.1.6.5.3.12.1.3 | Columns5SbsViolationStatusMACAddress | read-only | current | The MAC address of the device attempting unauthorized network access. (MAC addrees-based security) |
| 1.3.6.1.4.1.45.1.6.5.3.13 | Scalars5SbsMgmViolationType | read-only | current | Type of management access attempted when the violation occurred. |
| 1.3.6.1.4.1.45.1.6.5.3.14 | Scalars5SbsMgmViolationIpAddress | read-only | current | IP Address of the station attempting unauthorized management access. |
| 1.3.6.1.4.1.45.1.6.5.3.15 | Scalars5SbsPortSecurityStatus | read-write | current | The set of ports for which security is enabled. The bitwise AND of s5SbsPortSecurityStatus and s5SbsPortLearnStatus must be the empty set. |
| 1.3.6.1.4.1.45.1.6.5.3.16 | Scalars5SbsPortLearnStatus | read-write | current | The set of ports for which auto learning is enabled. Note that a port's bit in this object may not be turned on if the port's value of s5SbsAutoLearningConfigE… |
| 1.3.6.1.4.1.45.1.6.5.3.17 | Scalars5SbsCurrSecurityLists | read-only | current | The current number of entries of the Security lists in the s5SbsSecurityListTable. |
| 1.3.6.1.4.1.45.1.6.5.3.18 | Scalars5SbsMaxSecurityLists | read-only | current | The maximum number of entries of the Security lists in the s5SbsSecurityListTable. |
| 1.3.6.1.4.1.45.1.6.5.3.19 | Tables5SbsSecurityListTable | not-accessible | current | A table containing a list of Security port lists. |
| 1.3.6.1.4.1.45.1.6.5.3.19.1 | Rows5SbsSecurityListEntry | not-accessible | current | An entry in this table |
| 1.3.6.1.4.1.45.1.6.5.3.19.1.1 | Columns5SbsSecurityListIndx | read-only | current | The index of the security list. This corresponds to the Security port list which can be used as index into s5SbsAuthCfgTable. |
| 1.3.6.1.4.1.45.1.6.5.3.19.1.2 | Columns5SbsSecurityListMembers | read-write | current | The set of ports that are currently members in this Port list. |
| 1.3.6.1.4.1.45.1.6.5.3.19.1.3 | Columns5SbsSecurityListStatus | read-write | current | The status of the SecurityList entry. The primary use of this object is for modifying the SecurityList table. Values that can be written create(2), delete(3), … |
| 1.3.6.1.4.1.45.1.6.5.3.20 | Nodes5SbsMacViolation | |||
| 1.3.6.1.4.1.45.1.6.5.3.20.1 | Scalars5SbsMacViolationClear | read-write | current | This object is used to clear all entries in the s5SbsMacViolationTable. Setting it to clear(2) will clear all entries in that table. Setting it to other(1) has… |
| 1.3.6.1.4.1.45.1.6.5.3.20.2 | Tables5SbsMacViolationTable | not-accessible | current | A table containing a list of Security port lists. |
| 1.3.6.1.4.1.45.1.6.5.3.20.2.1 | Rows5SbsMacViolationEntry | not-accessible | current | An entry in this table |
| 1.3.6.1.4.1.45.1.6.5.3.20.2.1.1 | Columns5SbsMacViolationAddress | read-only | current | The MAC address that caused an access violation. |
| 1.3.6.1.4.1.45.1.6.5.3.20.2.1.2 | Columns5SbsMacViolationBrd | read-only | current | The last board/slot/unit number on which the MAC address caused an access violation. |
| 1.3.6.1.4.1.45.1.6.5.3.20.2.1.3 | Columns5SbsMacViolationPort | read-only | current | The last port number on which the MAC address caused an access violation. |
| 1.3.6.1.4.1.45.1.6.5.3.21 | Scalars5SbsAutoLearningAgingTime | read-write | current | The lifetime for MAC addresses which are auto-learned. This is measured in minutes. A value of 0 means addresses are not aged out. |
| 1.3.6.1.4.1.45.1.6.5.3.22 | Tables5SbsAutoLearningConfigTable | not-accessible | current | A table containing per-port configuration for auto-learning. Entries exist in the table for each ethernet port in the system. |
| 1.3.6.1.4.1.45.1.6.5.3.22.1 | Rows5SbsAutoLearningConfigEntry | not-accessible | current | An entry in this table |
| 1.3.6.1.4.1.45.1.6.5.3.22.1.1 | Columns5SbsAutoLearningConfigBrd | not-accessible | current | The board/slot/unit number. |
| 1.3.6.1.4.1.45.1.6.5.3.22.1.2 | Columns5SbsAutoLearningConfigPort | not-accessible | current | The port number. |
| 1.3.6.1.4.1.45.1.6.5.3.22.1.3 | Columns5SbsAutoLearningConfigEnabled | read-write | current | This object indicates whether auto-learning is enabled on the port. Note that this object may not be set to true(1) for a port whose bit is turned on in s5SbsP… |
| 1.3.6.1.4.1.45.1.6.5.3.22.1.4 | Columns5SbsAutoLearningConfigMaxMacs | read-write | current | This object indicates the maximum number of MAC addresses that may be learned on the port. |
| 1.3.6.1.4.1.45.1.6.5.3.23 | Scalars5SbsAutoLearningPorts | read-write | current | This object specifies the set of ports for which auto- learning is enabled. It is an alternative to s5SbsAutoLearningConfigEnabled. |
| 1.3.6.1.4.1.45.1.6.5.3.24 | Scalars5SbsAutoLearningSticky | read-write | current | This object controls whether the 'sticky-mac' feature is enabled. |
| 1.3.6.1.4.1.45.1.6.5.3.25 | Scalars5SbsSecurityLockoutPortList | read-write | current | This object controls the set of ports that are locked such that they cannot have mac-security enabled. |
| 1.3.6.1.4.1.45.1.6.5.3.26 | Tables5SbsDaFilteringTable | not-accessible | current | A table containing a list of destination MAC addresses based on which MAC Security will filter the frames. |
| 1.3.6.1.4.1.45.1.6.5.3.26.1 | Rows5SbsDaFilteringEntry | not-accessible | current | An entry in the MAC Security MAC-DA-Filter table. |
| 1.3.6.1.4.1.45.1.6.5.3.26.1.1 | Columns5SbsDaFilteringIndx | not-accessible | current | The index of the MAC Destination Address. This corresponds to the destination MAC address table index which is an index into s5sbsDaFilteringTable. |
| 1.3.6.1.4.1.45.1.6.5.3.26.1.2 | Columns5SbsDaFilteringAddress | read-create | current | The destination MAC address based on which the MAC Security will filter the frames which will match any of the addresses in the MAC-DA-Filtering table. This ob… |
| 1.3.6.1.4.1.45.1.6.5.3.26.1.3 | Columns5SbsDaFilteringStatus | read-create | current | The status of the MAC-DA-Filtering entry. The primary use of this object is for modifying the MAC-DA-Filtering table. Values that can be written add(2), remove… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PortSet | OCTET STRING (SIZE (0..256)) | current | The string is a variable length string which may vary from 0 to 256 octets long. The user must use the OCTET STRING length field in order to convey/determine how many octets are being used. Each bit corresponds to a por… |