SA-CM-MIB
97 objects
Cisco Cable Modem MIB definition
Imported Objects
| IF-MIB | -- RFC2571 ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus TAddress TDomain TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1429 | Nodesa | |||
| 1.3.6.1.4.1.1429.77 | IdentitysaCmMib | Cisco Cable Modem MIB definition | ||
| 1.3.6.1.4.1.1429.77.1 | NodedpxCmMibObjects | |||
| 1.3.6.1.4.1.1429.77.1.2 | NodecmVendorInfo | |||
| 1.3.6.1.4.1.1429.77.1.2.6 | ScalarvendorDefaultDSfreq | read-write | current | DOCSIS: initial downstream frequency, range: 93000000 to 855000000 Hz EuroDOCSIS: initial downstream frequency, range: 88000000 to 859000000 Hz |
| 1.3.6.1.4.1.1429.77.1.2.7 | ScalarvendorDSLEDTreatment | read-write | current | This MIB is only valid in DOCSIS 3.0 enabled modems with dual LEDs. This MIB determines the DS LED color, green or amber, to be used to indicate DS state. sign… |
| 1.3.6.1.4.1.1429.77.1.2.8 | ScalarvendorLINKLEDTreatment | read-write | current | This MIB will determine Link Speed using blink rate for DOCSIS 2.0 modems or using LED color for DOCSIS 3.0 Modems as seen with the LINK LED. default: LINK LED… |
| 1.3.6.1.4.1.1429.77.1.2.9 | ScalarvendorUSLEDTreatment | read-write | current | This MIB is only valid in DOCSIS 3.0 enabled modems with dual LEDs. This MIB determines the US LED color, green or amber to be used to indicate US state. signa… |
| 1.3.6.1.4.1.1429.77.1.2.10 | ScalarvendorONLINELEDTreatment | read-write | current | This MIB is only valid in DOCSIS 3.0 enabled modems with dual LEDs. This MIB provides a way to select the ONLINE LED color, green or amber to distinguish betwe… |
| 1.3.6.1.4.1.1429.77.1.3 | NodecmAPInfo | |||
| 1.3.6.1.4.1.1429.77.1.3.1 | ScalarcmAPIgmp | read-write | current | 0: disable IGMP proxy, 1: enable IGMP proxy |
| 1.3.6.1.4.1.1429.77.1.3.4 | ScalarcmAPAgingOut | read-write | current | 0: disable ARP aging out 1: enable ARP aging out |
| 1.3.6.1.4.1.1429.77.1.3.13 | ScalarcmAPMulticastPromiscuousMode | read-write | current | Support for transparent multicast pass-thru using Promiscuous Multicast Mode. The setting will be stored in non-volatile memory and will be retained through a … |
| 1.3.6.1.4.1.1429.77.1.3.15 | ScalarcmAPInternalInterface | read-write | current | Controls the state of local interface. 0: Shut down local interface, 1: Leave local interface as is. |
| 1.3.6.1.4.1.1429.77.1.3.18 | ScalarcmAPFactoryReset | read-write | current | Can be set with a sequence of values to activate a remote factory reset. This is the same as a sustained ( 3 seconds or more ) reset switch. Reading this objec… |
| 1.3.6.1.4.1.1429.77.1.3.19 | ScalarsaCmArpRateLimit | read-write | current | Setting ARP rate-limit defines the number of ARP packets that can be processed per second. Limitation of this number prevents denial-of-service attacks. A valu… |
| 1.3.6.1.4.1.1429.77.1.3.20 | ScalarsaCmInternalDhcpServer | read-write | current | Controls the DHCP server that is used when CM is offline. 0: disable internal DHCP server 1: enable internal DHCP server |
| 1.3.6.1.4.1.1429.77.1.4 | NodecmInterfaceInfo | |||
| 1.3.6.1.4.1.1429.77.1.4.7 | ScalarcmConsoleMode | read-write | current | To Control console port is disabled, read only, or read write |
| 1.3.6.1.4.1.1429.77.1.4.8 | ScalarcmTimerT4 | read-write | current | T4 timeout definition. |
| 1.3.6.1.4.1.1429.77.1.4.9 | ScalarsaCmTodRenewal | read-write | current | Defines how often to update time with ToD protocol. 0: never 1: together with DHCP renewal 2-11: reserved 12+: number of hours |
| 1.3.6.1.4.1.1429.77.1.4.10 | ScalarsaCmAutoResetNoActivity | read-write | current | Setting this object to any value N > 0 will cause the CM to reboot autonomously 3/4th of N minutes after the modem has detected that there is no connectivity t… |
| 1.3.6.1.4.1.1429.77.1.4.11 | ScalarsaCmCpeMacAging | read-write | current | Setting this object to any value N > 0 will cause the CM to remove a MAC address from its CPE table N seconds after the modem has detected no traffic from it. … |
| 1.3.6.1.4.1.1429.77.1.4.12 | ScalarsaCmBpiForward | read-write | current | This object controls whether to forward traffic that is not destined for any CPE (not in CPE table) when running BPI. 1: follow DOCSIS rules. Do not forward tr… |
| 1.3.6.1.4.1.1429.77.1.4.14 | ScalarsaCmForceDualscan | read-write | current | The MIB will choose whether to force dualscan operation for the device. Dualscan refers to the CM ability to automatically scan for both 6MHz and 8MHz carriers… |
| 1.3.6.1.4.1.1429.77.1.4.15 | ScalarsaCmDsBonding | read-write | current | The MIB will choose whether to enable downstream channel bonding for bonding-capable modems. Non-bonding modems will ignore this MIB object. 0 : Disable downst… |
| 1.3.6.1.4.1.1429.77.1.4.33 | ScalarsaCmDocsisCapableVersion | read-only | current | Displays the string value for CM DHCP DISCOVER option 60 text. This mib is only readable through SNMP.This MIB object can queried to identify the device's docs… |
| 1.3.6.1.4.1.1429.77.1.4.34 | ScalarsaOorDsidOverride | read-write | current | This MIB is only valid on DOCSIS 3.0 capable modems. This feature is disabled by default. This MIB will modify the handling of OOR (Out of Range) DSID packets.… |
| 1.3.6.1.4.1.1429.77.1.4.39 | ScalarsaCmCpeL2VpnMacAging | read-write | current | This MIB defines same functionality as TLV 65 for L2VPN implementation. When the value is is set to 1 (Enable), Mac aging implementation is as per cablelabs sp… |
| 1.3.6.1.4.1.1429.77.1.4.40 | ScalarsaCmL2VpnUsForwardingCriteria | read-write | current | Applicable to L2VPN enabled CMs only. This MIB defines the policy that the CM should use when forwarding packets that do not match the upstream classifier crit… |
| 1.3.6.1.4.1.1429.77.1.4.41 | TablecmEthernetOperTable | not-accessible | current | Table for Ethernet interface link speed, duplex, mode, and operation. |
| 1.3.6.1.4.1.1429.77.1.4.41.1 | RowcmEthernetOperEntry | not-accessible | current | Entries for Ethernet interface link speed, duplex, mode and operation. |
| 1.3.6.1.4.1.1429.77.1.4.41.1.1 | ColumncmEthernetOperIndex | not-accessible | current | Index used for the interfaces. |
| 1.3.6.1.4.1.1429.77.1.4.41.1.2 | ColumncmEthernetOperSetting | read-only | current | Displays the current Ethernet port link speed and duplex. 0: link-down(0), 1: half-duplex-10Mbps(1), 2: full-duplex-10Mbps(2), 3: half-duplex-100Mbps(3), 4: fu… |
| 1.3.6.1.4.1.1429.77.1.4.41.1.3 | ColumncmEthernetOperMode | read-only | current | Displays the current Ethernet port speed and duplex link Mode. 1: Auto-negotiate(0) 2: Manual(1) |
| 1.3.6.1.4.1.1429.77.1.4.41.1.4 | ColumncmEthernetIfAdminStatus | read-write | current | For RG Mode this MIB provides a way to force the ifAdminStatus.x MIB settings for the individual Ethernet ports to the values stored in cmEthernetAdminStatus.x… |
| 1.3.6.1.4.1.1429.77.1.4.42 | ScalarcmEthernetIfAdminOverride | read-write | current | For RG Mode enabling this MIB forces the index values of cmEthernetifAdminStatus.x stored in non-vol into ifAdminStatus.x For Bridge Mode the ports are exclusi… |
| 1.3.6.1.4.1.1429.77.1.4.43 | ScalarsaCmUsBonding | read-only | current | The MIB will choose whether to advertise upstream channel bonding for bonding-capable modems in the modem capabilitiies during registration. Non-DOCSIS 3.0 mod… |
| 1.3.6.1.4.1.1429.77.1.4.44 | ScalarsaCmIcmpRateLimit | read-write | current | Setting ICMP rate-limit defines the number of ICMP packets that can be processed per second. Limitation of this number prevents denial-of-service attacks. Sett… |
| 1.3.6.1.4.1.1429.77.1.4.46 | ScalarsaCmTftpBlockSizeV4 | read-write | current | This MIB controls the TFTP block size in IPv4 operation. Valid values are 0, 8-8192. A value of 0 means to use the default block size of 1448 and do not negoti… |
| 1.3.6.1.4.1.1429.77.1.4.47 | ScalarsaCmTftpBlockSizeV6 | read-write | current | This MIB controls the TFTP block size in IPv4 operation. Valid values are 0, 8-8192. A value of 0 means to use the default block size of 1428 and do not negoti… |
| 1.3.6.1.4.1.1429.77.1.4.48 | ScalarsaCmUsPowerLimit | read-write | current | This MIB controls the upstream power limit imposed on the cable modem (in dB). |
| 1.3.6.1.4.1.1429.77.1.6 | NodesaCmSoftwareDownload | |||
| 1.3.6.1.4.1.1429.77.1.6.1 | TablesaCmSoftwareTable | not-accessible | current | Table for hardware specific software download. |
| 1.3.6.1.4.1.1429.77.1.6.1.1 | RowsaCmSoftwareEntry | not-accessible | current | Entries for hardware specific software download. |
| 1.3.6.1.4.1.1429.77.1.6.1.1.1 | ColumnsaCmSwIndex | not-accessible | current | Index used to order the application of access entries. |
| 1.3.6.1.4.1.1429.77.1.6.1.1.2 | ColumnsaCmSwModel | not-accessible | current | Model name of the cable modem product. If not set, applies to all models. example: DPC2100 |
| 1.3.6.1.4.1.1429.77.1.6.1.1.3 | ColumnsaCmSwHwVer | not-accessible | current | Hardware version of the cable modem product. If not set, applies to all versions. |
| 1.3.6.1.4.1.1429.77.1.6.1.1.4 | ColumnsaCmSwBootLoader | not-accessible | current | Boot loader version of the cable modem product. If not set, applies to all versions. |
| 1.3.6.1.4.1.1429.77.1.6.1.1.5 | ColumnsaCmSwProtocol | not-accessible | current | Protocol used in cable modem product. |
| 1.3.6.1.4.1.1429.77.1.6.1.1.6 | ColumnsaCmSwFilename | not-accessible | current | Filename of the software image. |
| 1.3.6.1.4.1.1429.77.1.6.1.1.7 | ColumnsaCmSwServer | not-accessible | deprecated | TFTP server IP address where software image is located. |
| 1.3.6.1.4.1.1429.77.1.6.1.1.8 | ColumnsaCmSwAdminStatus | not-accessible | current | See docsDevSwAdminStatus for details. |
| 1.3.6.1.4.1.1429.77.1.6.1.1.9 | ColumnsaCmSwMethod | not-accessible | current | Method of software download. |
| 1.3.6.1.4.1.1429.77.1.6.1.1.11 | ColumnsaCmSwServerAddressType | not-accessible | current | This MIB defines the type of internet address to be used for the TFTP Server. 0: An unknown address type. This value MUST be used if the value of the correspon… |
| 1.3.6.1.4.1.1429.77.1.6.1.1.12 | ColumnsaCmSwServerAddress | not-accessible | current | TFTP server IP address where software image is located. |
| 1.3.6.1.4.1.1429.77.1.6.3 | ScalarsaCmSoftwareDownloadTFTPServer | read-only | current | When CM configuration file initiated software upgrade is needed, the TFTP request will be sent to SwUpgradeServer IP address. When the value of SwUpgradeServer… |
| 1.3.6.1.4.1.1429.77.1.7 | NodesaCmWebAccess | |||
| 1.3.6.1.4.1.1429.77.1.7.2 | TablesaCmWebAccessUserIfTypeTable | not-accessible | current | Table for various user/if type web access levels. |
| 1.3.6.1.4.1.1429.77.1.7.2.1 | RowsaCmWebAccessUserIfTypeEntry | not-accessible | current | Entries for various users/if type web access levels. |
| 1.3.6.1.4.1.1429.77.1.7.2.1.1 | ColumnsaCmWebAccessUserTypeIndex | read-only | current | Access level for various user types. home-user(1): This is intended to be used for home users cus-admin(5): This is intended to be used for the CUSADMIN adv-us… |
| 1.3.6.1.4.1.1429.77.1.7.2.1.2 | ColumnsaCmWebAccessIfTypeIndex | read-only | current | Web access over various interface types. lan(1): This will control the CPE interface on the lan side. rf-cm(2): This will control the remote access to the web … |
| 1.3.6.1.4.1.1429.77.1.7.2.1.3 | ColumnsaCmWebAccessUserIfLevel | read-write | current | Access levels for web pages. not-applicable(-1) - This will be displayed if access level can not be determined for any interface/user. In the case when the var… |
| 1.3.6.1.4.1.1429.77.1.7.3 | ScalarsaCmWebAccessHomeUsername | read-write | current | Defines the username for home-user. This parameter is stored in non-vol and is blank by default. NOTE: This should be a hidden value in SNMPGET/SNMPWALK but us… |
| 1.3.6.1.4.1.1429.77.1.7.4 | ScalarsaCmWebAccessHomeUserPassword | read-write | current | Defines the password for home-user. If user's password matches the default password (meaning user has not changed the password), a change password page comes o… |
| 1.3.6.1.4.1.1429.77.1.7.5 | ScalarsaCmWebAccessAdvancedType | read-only | current | Type of password for advnaced pages. |
| 1.3.6.1.4.1.1429.77.1.7.6 | ScalarsaCmWebAccessAdvancedUsername | read-only | current | Username for advanced web pages. NOTE: This should be a hidden value in SNMPGET/SNMPWALK but user should be able to set this using SNMPSET |
| 1.3.6.1.4.1.1429.77.1.7.7 | ScalarsaCmWebAccessAdvancedPassword | not-accessible | current | Password (depends on type) for advanced web pages. If type = 1, the password is the string value. If type = 2, the password is the 16-byte octet (hex) string o… |
| 1.3.6.1.4.1.1429.77.1.7.8 | ScalarsaCmWebAccessNoActivityTimeout | read-write | current | Timeout for a web session if no activity is present. If the timer expires, user will be logged out of Advanced webpage. If 0, web session will not timeout. Val… |
| 1.3.6.1.4.1.1429.77.1.7.9 | ScalarsaCmWebAccessHomeUserClearPassword | read-write | current | Clears home-user passwords if set to true (clear=set to default). Always returns false when read. |
| 1.3.6.1.4.1.1429.77.1.10 | NodesaPUF | |||
| 1.3.6.1.4.1.1429.77.1.10.1 | TablesaPUFTable | not-accessible | current | A table of PowerUp Frequencies scanned first. |
| 1.3.6.1.4.1.1429.77.1.10.1.1 | RowsaPUFEntry | not-accessible | current | A row in the table that specifies a single frequency. |
| 1.3.6.1.4.1.1429.77.1.10.1.1.1 | ColumnsaPUFIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.1429.77.1.10.1.1.2 | ColumnsaPUFRowStatus | read-write | current | Controls and reflects the status of rows in this table. Rows in this table may be created by either the create-and-go or create-and-wait paradigms. There is no… |
| 1.3.6.1.4.1.1429.77.1.10.1.1.3 | ColumnsaPUFFrequency | read-create | current | Frequency in Hz |
| 1.3.6.1.4.1.1429.77.1.10.1.1.4 | ColumnsaPUFAnnex | read-write | current | Annex mode for the frequency |
| 1.3.6.1.4.1.1429.77.1.10.1.1.5 | ColumnsaPUFScanNow | read-write | current | Setting an index of this object to true(1) causes the modem to immediately go offline and scan for the frequency stored in saPUFFrequency.x. The results and ti… |
| 1.3.6.1.4.1.1429.77.1.10.1.1.6 | ColumnsaPUFScanOnNextBoot | read-write | current | Setting an index of this object to set(1) causes the modem to scan for the frequency stored in saPUFFrequency.x on the next reboot and record the results to no… |
| 1.3.6.1.4.1.1429.77.1.10.1.1.7 | ColumnsaPUFScanResults | read-only | current | Indicates if RF energy was detected on the last scan. This value is stored in non-volatile memory. |
| 1.3.6.1.4.1.1429.77.1.10.1.1.8 | ColumnsaPUFScanTimestamp | read-only | current | Reports the timestamp (YYYYMMDDHHMM) of the last scan. This value is stored in non-volatile memory. |
| 1.3.6.1.4.1.1429.77.1.10.1.1.9 | ColumnsaPUFScanResultsType | read-only | current | Indicates the type of RF energy that was detected on the last scan. This value is stored in non-volatile memory. |
| 1.3.6.1.4.1.1429.77.1.10.2 | ScalarsaPUFTrapServer | read-write | current | Defines the IP address of the server to send SNMP traps after running a scan. This value is stored in non-volatile memory. |
| 1.3.6.1.4.1.1429.77.1.10.3 | ScalarsaPUFTrapControl | read-write | current | Send a trap: - If RF energy is detected - enableOnEnergyDetection(1), - If RF energy is not detected - enableOnNoEnergyDetected(2), - When a scan is run - enab… |
| 1.3.6.1.4.1.1429.77.1.10.4 | ScalarsaPUFScanAllNow | read-write | current | Setting this object to true(1) causes the modem to immediately go offline and scan all the frequencies stored in the saPUFFrequency table. Results and timestam… |
| 1.3.6.1.4.1.1429.77.1.10.5 | ScalarsaPUFEntriesClearOnRFD | read-only | current | By Default, reset to factory default (RFD) would clear all the PUF entries to factory values. Setting this value to false(2) would mean that the saPUF table fr… |
| 1.3.6.1.4.1.1429.77.1.11 | NodesaLKF | |||
| 1.3.6.1.4.1.1429.77.1.11.1 | TablesaLKFTable | not-accessible | current | A table of Last Known Frequencies. |
| 1.3.6.1.4.1.1429.77.1.11.1.1 | RowsaLKFEntry | not-accessible | current | A row in the table that specifies a single frequency. |
| 1.3.6.1.4.1.1429.77.1.11.1.1.1 | ColumnsaLKFIndex | not-accessible | current | Indicates the instance of this table row. |
| 1.3.6.1.4.1.1429.77.1.11.1.1.2 | ColumnsaLKFFrequency | read-create | current | Frequency in Hz |
| 1.3.6.1.4.1.1429.77.1.14 | NodesaSoftwareIdentity | |||
| 1.3.6.1.4.1.1429.77.1.14.1 | TablesaSoftwareTable | not-accessible | current | A Table of SW features support in the running image |
| 1.3.6.1.4.1.1429.77.1.14.1.1 | RowsaSoftwareTableEntry | not-accessible | current | A row in the table that specifies a single reset entry. |
| 1.3.6.1.4.1.1429.77.1.14.1.1.1 | ColumnsaSoftwareIndex | not-accessible | current | Index for the table. |
| 1.3.6.1.4.1.1429.77.1.14.1.1.2 | ColumnsaSoftwareBaseVersion | read-only | current | Defines the SoC vendor base version for the feature, if any |
| 1.3.6.1.4.1.1429.77.1.14.1.1.3 | ColumnsaSoftwareFeatureName | read-only | current | Shows the features present in the software. Also provides Cisco specific compile options used |