SAF-IPRADIO
144 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString ifEntry |
| SNMPv2-TC | DateAndTime |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7571 | Nodesaf | |||
| 1.3.6.1.4.1.7571.100 | Nodetehnika | |||
| 1.3.6.1.4.1.7571.100.1 | NodemicrowaveRadio | |||
| 1.3.6.1.4.1.7571.100.1.1 | NodepointToPoint | |||
| 1.3.6.1.4.1.7571.100.1.1.5 | Nodesafip | |||
| 1.3.6.1.4.1.7571.100.1.1.5.1 | NodeipRadio | |||
| 1.3.6.1.4.1.7571.100.1.1.5.1.1 | NodeipRadioCfg | |||
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1 | NodeipRadioCfgGeneral | |||
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.1 | Scalarproduct | read-only | mandatory | Name of the model. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.2 | Scalardescription | read-only | mandatory | Description of the model. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.3 | Scalarhostname | read-write | mandatory | The name of the host. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.4 | ScalarsysDateAndTime | read-write | mandatory | Current date and time set. For SET tenths of seconds ignored. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.5 | ScalarsysTemperature | read-only | mandatory | Unit temperature in degrees by Celsius. NB - sw before 2009.03.18 shows in *10 degrees |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.6 | Scalarlicense | read-write | mandatory | To set license information. Read allways 'OK'. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.7 | ScalarlicenseMask | read-only | mandatory | Read license mask. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.8 | ScalarlicenseUpdateStatus | read-only | mandatory | Status of last license update operation by setting license using snmp. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10 | TableradioTable | not-accessible | mandatory | Radio table. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1 | RowradioEntry | not-accessible | mandatory | Entry containing objects in radio table. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.1 | ColumnradioIndex | read-only | mandatory | A unique value for each radio. Its value represents UNIT: 1 - for 'local'; 2 - for 'remote' |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.2 | ColumnradioGenStatus | read-only | mandatory | A General status of each radio: 1 - 'OK'; 2 - 'error' |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.3 | ColumnradioSide | read-write | mandatory | Side for duplex communication. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.4 | ColumnradioTxPower | read-write | mandatory | Tx power of radio transmitter in dBm. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.5 | ColumnradioRxLevel | read-only | mandatory | Received signal level in dBm. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.6 | ColumnradioDuplexShift | read-write | mandatory | Utilized duplex shift in KHz. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.7 | ColumnradioLoopback | read-only | mandatory | Radio loopback on/off. To set use loopback command. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.8 | ColumnradioTxMute | read-write | mandatory | Status of 'Tx mute': 1 - Tx is muted; 2 - Tx is not muted. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.9 | ColumnradioTxFrequency | read-write | mandatory | Tx frequency in kHz. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.10.1.10 | ColumnradioRxFrequency | read-only | mandatory | Rx frequency in kHz. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11 | TableaTPCTable | not-accessible | mandatory | ATPC table |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1 | RowaTPCEntry | not-accessible | mandatory | Entry containing objects in ATPC table. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1.1 | ColumnatpcIndex | read-only | mandatory | Its value represents UNIT 1 for 'local'; 2 for 'remote'. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1.2 | ColumnatpcEnabled | read-write | mandatory | ATPC status: 1 for 'on'; 2 for 'off'. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.11.1.3 | ColumnatpcTxPowerCorrection | read-only | mandatory | ATPC Tx power correction in dBm. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12 | TablemodemTable | not-accessible | mandatory | CFIP modem table. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1 | RowmodemEntry | not-accessible | mandatory | Entry containing objects in modem table. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.1 | ColumnmodemIndex | read-only | mandatory | Value represents UNIT: 1 for local; 2 for remote. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.2 | ColumnmodemGeneralStatus | read-only | mandatory | A General status of each modem: 1 - 'OK'; 2 - 'error' |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.3 | ColumnmodemBandwith | read-write | mandatory | Modem bandwidth set in KHz. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.4 | ColumnmodemE1T1Channels | read-write | mandatory | Number of E1 or T1 channels set. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.5 | ColumnmodemModulation | read-only | mandatory | Modem modulation set. Modulution values are following: QPSK - 1, 8PSK - 2, 16QAM - 3, 32QAM - 4, 64QAM - 5, 128QAM - 6, 256QAM - 7. The combination of wide ban… |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.6 | ColumnmodemTotalCapacity | read-only | mandatory | Total capacity set in Kbps. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.7 | ColumnmodemEthernetCapacity | read-only | mandatory | Ethernet capacity set in Kbps. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.8 | ColumnmodemAcqStatus | read-only | mandatory | |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.9 | ColumnmodemLastAcqError | read-only | mandatory | |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.10 | ColumnmodemRadialMSE | read-only | mandatory | Radial mean square error value *10 in dB. Radial MSE is a method for estimating the signal to noise ratio. ACM engine uses normalized MSE, which is the inverse… |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.11 | ColumnmodemInternalAGCgain | read-only | mandatory | dBm |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.12 | ColumnmodemCarrierOffset | read-only | mandatory | Carrier frequency offset in Hz. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.13 | ColumnmodemSymbolRateTx | read-only | mandatory | kHz |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.14 | ColumnmodemSymbolRateRx | read-only | mandatory | kHz |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.15 | ColumnmodemLDPCdecoderStress | read-only | mandatory | The load of LDPC (low-density parity-check code) decoder. The LDPC is monitored for the number of errors being corrected on the input of LDPC decoder. LDPC str… |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.16 | ColumnmodemACMengine | read-only | mandatory | Status of ACM engine. When 'on', value '1' is shown, when 'off' - value is '2'. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.17 | ColumnmodemACMmodulationMin | read-write | mandatory | Modem modulation set. Modulution values are following: QPSK - 1, 8PSK - 2, 16QAM - 3, 32QAM - 4, 64QAM - 5, 128QAM - 6, 256QAM - 7. The combination of wide ban… |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.18 | ColumnmodemACMtotalCapacity | read-only | mandatory | Total capacity in Kbps set by ACM. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.19 | ColumnmodemACMethernetCapacity | read-only | mandatory | Ethernet capacity in Kbps set by ACM. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.20 | ColumnmodemStandard | read-write | mandatory | Modem operational standard ETSI or ANSI |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.21 | ColumnmodemE1T1ChannelMask | read-write | mandatory | E1 or T1 channel mask 0x00 - 0x0f |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.22 | ColumnmodemACMmodulationMax | read-write | mandatory | Modem modulation set. Modulution values are following: QPSK - 1, 8PSK - 2, 16QAM - 3, 32QAM - 4, 64QAM - 5, 128QAM - 6, 256QAM - 7. The combination of wide ban… |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.12.1.23 | ColumnmodemRowStatus | read-write | mandatory | Row status - to update written data for modemBandwith, modemACMmodulationMin, modemACMmodulationMax, modemE1T1ChannelMask. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.13 | ScalarvlansEnabled | read-write | mandatory | unit temperature *10 degrees Celsius |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14 | TablevlanTable | not-accessible | mandatory | Vlan table |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1 | RowvlanEntry | not-accessible | mandatory | entry containing vlan objects |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.1 | ColumnvlanNumber | read-write | mandatory | A unique value for each vlan. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.2 | ColumnvlanPortType | read-write | mandatory | VLAN port type management, traffic or endpoint |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.3 | ColumnvlanPortmap | read-only | mandatory | display port bindings bitfield 111(bin) |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.4 | ColumnvlanFid | read-only | optional | a filtering identifier (assigned automagically) |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.5 | ColumnvlanCfgStat | read-write | mandatory | enable/disable vlan # or clear row data |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.1.14.1.6 | ColumnvlanRowStatus | read-write | mandatory | Row status (execute configuration on active) Changing any table value sets this value into state notReady. To update row status write value active(1) into this… |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.2 | NodeipRadioCfgNetwork | |||
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.2.1 | ScalarlocalIp | read-write | mandatory | IPv4 Ethernet address of the local unit in a number format(XXX.XXX.XXX.XXX) |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.2.2 | ScalarlocalIpMask | read-write | mandatory | IPv4 Ethernet mask of the local unit in a number format (XXX.XXX.XXX.XXX) |
| 1.3.6.1.4.1.7571.100.1.1.5.1.1.2.3 | ScalarremoteIp | read-write | mandatory | IPv4 Ethernet address of the remote unit in a number format (XXX.XXX.XXX.XXX). |
| 1.3.6.1.4.1.7571.100.1.1.5.1.2 | NodeipRadioMgmt | |||
| 1.3.6.1.4.1.7571.100.1.1.5.1.2.1 | ScalarwriteConfig | write-only | mandatory | Write Config |
| 1.3.6.1.4.1.7571.100.1.1.5.1.2.2 | Scalarrestartcpu | write-only | mandatory | Restart of Mng CPU. Values: 1 - 'cold' restart; 3 - sw |
| 1.3.6.1.4.1.7571.100.1.1.5.1.2.3 | Scalarloopbacks | read-write | mandatory | Set loopback for 1 minute. value error(1) is not writable. Status of loopbacks. Values: 1 - 'error' (not writable); 2 - 'off'; 3 - 'rf' (radio frequency loopba… |
| 1.3.6.1.4.1.7571.100.1.1.5.1.2.4 | Scalarloopback-tributary-mask | read-only | mandatory | Loopback mask for E1/T1 channels |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3 | NodeipRadioStat | |||
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2 | NodeipRadioStatEth | |||
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.1 | ScalarethRXTruncatedFrames | read-only | mandatory | Number of truncated received frames since unit start or statistics reset. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.2 | ScalarethRXLongEvents | read-only | mandatory | Number of frames having byte count greater than MAXIMUM FRAME SIZE parameter (1518, 1536 or 1916 bytes) since unit start or statistics reset. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.3 | ScalarethRXVlanTagsDetected | read-only | mandatory | Number of VLAN Tags detected since unit start or statistics reset. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.4 | ScalarethRXUnsupOpcodes | read-only | mandatory | Number of frames recognized as control frames but contained an Unknown Opcode since unit start or statistics reset. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.5 | ScalarethRXPauseFrames | read-only | mandatory | Number of frames received as control frames with valid PAUSE opcodes since unit start or statistics reset. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.6 | ScalarethRXControlFrames | read-only | mandatory | Number of frames received as control frames since unit start or statistics reset. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.7 | ScalarethRXDribleNibbles | read-only | mandatory | Indicates that following the end of the packet additional 1 to 7 bits are received. A single nibble, named the dribble nibble, is formed but not sent to the sy… |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.8 | ScalarethRXBroadcasts | read-only | mandatory | Number of packets, which destination address contained broadcast address, since unit start or statiistics reset. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.9 | ScalarethRXMulticasts | read-only | mandatory | Number of packets, which destination address contained multicast address since unit start or statistics reset. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.10 | ScalarethRXDones | read-only | mandatory | Reception of packets successfully completed. Number of completed packets since unit start or statistics reset. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.11 | ScalarethRXOutOfRangeErrors | read-only | mandatory | Number of frames where Type/Length field larger than 1518 (Type Field) bytes since unit start or statistics reset. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.12 | ScalarethRXLengthCheckerrorsErrors | read-only | mandatory | Number of frames where frame length field in the packet does not match the actual data byte length and is not a Type Field since unit start or statistics reset. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.13 | ScalarethRXCRCErrors | read-only | mandatory | Number of frames where frame CRC do not match the internally generated CRC since unit start or statistics reset |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.14 | ScalarethRXCodeErrors | read-only | mandatory | Number of packets where one or more nibbles are signalled as errors during reception of the packet since unit start or statistics reset. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.15 | ScalarethRXFalseCarrierErrors | read-only | mandatory | Indicates that following the last receive statistics vector, a false carrier was detected, noted and reported with this the next receive statistics. The false … |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.16 | ScalarethRXDvEvent | read-only | mandatory | Number of the last receive (Rx) events seen being too short to be valid packets since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.17 | ScalarethRXPrevPktDropped | read-only | mandatory | Indicates that since the last receive (Rx), a packet is dropped (i.e. interframe gap too small). |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.18 | ScalarethRXByteCounterHi | read-only | mandatory | Total number of bytes received (Rx) on the wire since the last unit (re)start or purification of statistics, not counting collided bytes (bits 31:0). |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.19 | ScalarethRXByteCounterLow | read-only | mandatory | Total number of bytes received (Rx) on the wire since the last unit (re)start or purification of statistics, not counting collided bytes (bits 62:32). |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.21 | ScalarethTXVlanTags | read-only | mandatory | Number of VLAN tagged Tx packets since the last unit (re)start or purification of statistics. 32-bit counter. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.22 | ScalarethTXBackpresEvents | read-only | mandatory | Number of times Tx carrier-sense-method backpressure was previously applied since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.23 | ScalarethTXPauseFrames | read-only | mandatory | Number of frames transmitted (Tx) as control frames with valid PAUSE opcodes since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.24 | ScalarethTXControlFrames | read-only | mandatory | Number of frames transmitted (Tx) as control frames since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.25 | ScalarethTXWireByteCounterHi | read-only | mandatory | Total number of bytes transmitted (Tx) on the wire since the last unit (re)start or purification of statistics, including all bytes from collided attempts (bit… |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.26 | ScalarethTXWireByteCounterLow | read-only | mandatory | Total number of bytes transmitted (Tx) on the wire since the last unit (re)start or purification of statistics, including all bytes from collided attempts (bit… |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.28 | ScalarethTXUnderruns | read-only | mandatory | Number of underruns occured during frame transmission (Tx) since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.29 | ScalarethTXGiants | read-only | mandatory | Number of Tx frames having byte count greater than the MAXIMUM FRAME SIZE parameter (1516, 1536 or 1916 bytes) since the last unit (re)start or purification of… |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.30 | ScalarethTXLateCollisions | read-only | mandatory | Number of Tx collisions occurred beyond the collision window (512 bit times) since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.31 | ScalarethTXMaxCollisions | read-only | mandatory | Number of Tx packets aborted after number of collisions exceeded the RETRANSMISSION MAXIMUM parameter since the last unit (re)start or purification of statisti… |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.32 | ScalarethTXExcessiveDefers | read-only | mandatory | Number of Tx packets deferred in excess of 6,071 nibble times in 100 Mbps mode, or 24,287 bit-times in 10 Mbps mode since the last unit (re)start or purificati… |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.33 | ScalarethTXNonExcessiveDefers | read-only | mandatory | Number of Tx packets deferred for at least one attempt, but less than an excessive defer since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.34 | ScalarethTXBroadcasts | read-only | mandatory | Number of Tx packets since the last unit (re)start or purification of statistics, which destination address contained broadcast address. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.35 | ScalarethTXMulticasts | read-only | mandatory | Number of Tx packets since the last unit (re)start or purification of statistics, which destination address contained multicast address. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.36 | ScalarethTXDones | read-only | mandatory | Number of packets successfully transmitted (Tx) since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.38 | ScalarethTXLengthCheckErrors | read-only | mandatory | Number of Tx frames since the last unit (re)start or purification of statistics, where length field in the packet does not match the actual data byte length an… |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.39 | ScalarethTXCRCErrors | read-only | mandatory | Number of Tx frames since the last unit (re)start or purification of statistics, where CRC does not match the internally generated CRC. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.40 | ScalarethTXCollisions | read-only | mandatory | Number of collisions the current packet incurred during transmission (Tx) attempts. Note: Bits 19 through 16 are the collision count on any successfully transm… |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.41 | ScalarethTXByteCounterHi | read-only | mandatory | Total count of bytes transmitted (Tx) on the wire not including collided bytes (bits 31:0) since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.42 | ScalarethTXByteCounterLow | read-only | mandatory | Total count of bytes transmitted (Tx) on the wire not including collided bytes (bits 62:32) since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.44 | ScalarethGFPFCSErrors | read-only | mandatory | Number of generic framing procedure (GFP) frames with CRC errors received by the de-encapsulation block since the last unit (re)start or purification of statis… |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.45 | ScalarethGFPCHECErrors | read-only | mandatory | Number of generic framing procedure (GFP) frames with CHEC errors received by the de-encapsulation block since the last unit (re)start or purification of stati… |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.46 | ScalarethGFPDropedFrames | read-only | mandatory | Number of generic framing procedure (GFP) frames that were dropped in the de-encapsulation block since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.47 | ScalarethGFPDelineationErrors | read-only | mandatory | Number of 'lost of synchronization' events since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.48 | ScalarethQOSRXQ1Frames | read-only | mandatory | Number of frames received on Q1 since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.49 | ScalarethQOSRXQ1Dropped | read-only | mandatory | Number of frames dropped on Q1 since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.50 | ScalarethQOSRXQ2Frames | read-only | mandatory | Number of frames received on Q2 since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.51 | ScalarethQOSRXQ2Dropped | read-only | mandatory | Number of frames dropped on Q2 since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.52 | ScalarethQOSTXFrames | read-only | mandatory | Number of frames passed through TX FIFO since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.2.53 | ScalarethQOSTXDropped | read-only | mandatory | Number of frames dropped in TX FIFO since the last unit (re)start or purification of statistics. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.3 | Tablee1t1StatTable | not-accessible | mandatory | E1 (T1) status Table. |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1 | Rowe1t1StatEntry | not-accessible | mandatory | Entry containing objects in E1 (T1) table |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1.1 | Columne1t1LOS | read-only | mandatory | if signal loss present |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1.2 | Columne1t1AIS | read-only | mandatory | if AIS present |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.3.1.3 | Columne1t1ChannelNr | read-only | mandatory | e1 channel number (it is not associated with interface number - ifEntry) |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.4 | NodemodemStatistics | |||
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.1 | ScalarmodemCountTime | read-only | mandatory | Count time in seconds |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.2 | ScalarmodemErroredBlock | read-only | mandatory | Errored block |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.3 | ScalarmodemErroredSecond | read-only | mandatory | Errored second |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.4 | ScalarmodemSeverelyErroredSecond | read-only | mandatory | Severely errored second |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.5 | ScalarmodemBackgroundBlockErrror | read-only | mandatory | Background Block Error |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.6 | ScalarmodemTotalBlockNumber | read-only | mandatory | Total Block Number |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.7 | ScalarmodemErroredSecondRatio | read-only | mandatory | Errored Second Ratio |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.8 | ScalarmodemSeverelyErroredSecondRatio | read-only | mandatory | Severely Errored Second Ratio |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.9 | ScalarmodemBackgroundBlockErrorRatio | read-only | mandatory | Background Block Error Ratio |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.10 | ScalarmodemUptime | read-only | mandatory | Uptime (s) |
| 1.3.6.1.4.1.7571.100.1.1.5.1.3.4.11 | ScalarmodemUnavailtime | read-only | mandatory | Unavailtime (s) |