SCTE-HMS-COMMON-MIB
46 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter NetworkAddress |
| RFC1213-MIB | DisplayString |
| SCTE-HMS-ROOTS | commonIdent |
| SCTE-ROOT | scteHmsTree |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5591.1.0 | NodehmsColdStart | A hmsColdStart trap signifies that the sending protocol entity is reinitializing itself such that the agent's configuration or the protocol entity implementati… | ||
| 1.3.6.1.4.1.5591.1.2 | NodehmsWarmStart | A hmsWarmStart trap signifies that the sending protocol entity is reinitializing itself such that neither the agent's configuration nor the protocol entity imp… | ||
| 1.3.6.1.4.1.5591.1.3.1 | NodecommonAdminGroup | |||
| 1.3.6.1.4.1.5591.1.3.1.1 | ScalarcommonLogicalID | read-write | mandatory | Specifies the logical ID for the network element used by network management systems. The ID will often remain with a specific location regardless of any specif… |
| 1.3.6.1.4.1.5591.1.3.1.2 | ScalarcommonVendor | read-only | mandatory | Displays the manufacturer of the network element. Displayed in human-readable format. |
| 1.3.6.1.4.1.5591.1.3.1.3 | ScalarcommonModelNumber | read-only | mandatory | Displays the model number of the network element. Displayed in human-readable format. |
| 1.3.6.1.4.1.5591.1.3.1.4 | ScalarcommonSerialNumber | read-only | mandatory | Returns the Serial Number of the Network Element. Displayed in human-readable format. |
| 1.3.6.1.4.1.5591.1.3.1.5 | ScalarcommonVendorInfo | read-only | optional | Returns vendor-specific information. Displayed in human-readable format. |
| 1.3.6.1.4.1.5591.1.3.1.6 | ScalarcommonNEStatus | read-only | mandatory | Bit mask, identical to that used in the Status field of the STATRESP PDU. See SCTE 25-2 (formerly HMS004). Bit 0: CHNLRQST Bit 1: CNTNRM Bit 2: CNTCUR Bit 3: M… |
| 1.3.6.1.4.1.5591.1.3.1.7 | ScalarcommonReset | read-write | mandatory | This object is used to reset the NE by writing 1 to it. Other values written to the object have no effect. Reading the object returns a 1, and has no effect on… |
| 1.3.6.1.4.1.5591.1.3.1.8 | ScalarcommonAlarmDetectionControl | read-write | mandatory | This object is used to control the detection of alarms in this NE. When a threshold from either the property table or the discrete property table is crossed in… |
| 1.3.6.1.4.1.5591.1.3.1.9 | ScalarcommonNetworkAddress | read-only | mandatory | This variable reports the network address (e.g., IP address) of the NE. This object was added to support the generation of traps. The value is retained in non-… |
| 1.3.6.1.4.1.5591.1.3.1.10 | ScalarcommonCheckCode | read-write | mandatory | This object reports the Check Code for the transponder's configuration. The check code is generated from objects which are stored in non-volatile memory as wel… |
| 1.3.6.1.4.1.5591.1.3.1.11 | ScalarcommonTrapCommunityString | read-write | mandatory | This object defines the community string reported in a trap. The default value is 'public'. Use of this object does not preclude the use of enterprise specific… |
| 1.3.6.1.4.1.5591.1.3.1.12 | ScalarcommonTamperStatus | read-only | optional | Returns the status of the anti-tamper device of the network element. this object requires an entry in the Discrete Property Table. the intact(1) value represen… |
| 1.3.6.1.4.1.5591.1.3.1.13 | ScalarcommonInternalTemperature | read-only | optional | Measured temperature inside the NE's case/housing. Units degrees Celsius. This item requires an entry in the properties MIB |
| 1.3.6.1.4.1.5591.1.3.1.14 | ScalarcommonTime | read-only | optional | All values are unsigned 32 bit integers. Time since the Epoch (00:00:00 UTC, January 1, 1970), measured in seconds(POSIX). |
| 1.3.6.1.4.1.5591.1.3.1.15 | ScalarcommonVarBindings | read-only | mandatory | This object indicates the maximum number of entries in the variable-binding list which can be accepted by the unit. A value of 0 indicates no specified limit. |
| 1.3.6.1.4.1.5591.1.3.1.16 | ScalarcommonResetCause | read-only | mandatory | This object reports the cause of the last reset. |
| 1.3.6.1.4.1.5591.1.3.1.17 | ScalarcommonCraftStatus | read-only | mandatory | This object reports the state of the craft interface. The status of this object does not imply any change to the transponder functionality through the MAC inte… |
| 1.3.6.1.4.1.5591.1.3.2 | NodecommonMACGroup | |||
| 1.3.6.1.4.1.5591.1.3.2.1 | ScalarcommonBackoffPeriod | read-write | mandatory | The backoff period in millseconds. This parameter is used as part of the random backoff period as defined by the Media Access Control Layer specification SCTE … |
| 1.3.6.1.4.1.5591.1.3.2.2 | ScalarcommonACKTimeoutWindow | read-write | mandatory | The Acknowledgement timeout window in milliseconds. Initial Power up default: 19 milliseconds. The value for this object is maintained in non-volatile memory. |
| 1.3.6.1.4.1.5591.1.3.2.3 | ScalarcommonMaximumMACLayerRetries | read-write | mandatory | The maximum number of retries a NE can make for a specific packet. This limit is intended to protect the network from a unit with a faulty receiver. Initial Po… |
| 1.3.6.1.4.1.5591.1.3.2.4 | ScalarcommonMaxPayloadSize | read-only | mandatory | This object reports the maximum length of the payload supported for a packet on the reverse or forward channel. |
| 1.3.6.1.4.1.5591.1.3.2.5 | ScalarcommonBackoffMinimumExponent | read-write | mandatory | This object is used to define the minimum value of the exponent used for the Backoff Algorithm as defined by the Media Access Control Layer specification SCTE … |
| 1.3.6.1.4.1.5591.1.3.2.6 | ScalarcommonBackoffMaximumExponent | read-write | mandatory | This object is used to define the maximum value of the exponent used for the Backoff Algorithm as defined by the Media Access Control Layer specification SCTE … |
| 1.3.6.1.4.1.5591.1.3.2.7 | ScalarcommonPhysAddress | read-only | mandatory | This variable reports the media dependant 'physical' address of the NE. This object was added to support the generation of traps. |
| 1.3.6.1.4.1.5591.1.3.3 | NodecommonMulticastGroup | |||
| 1.3.6.1.4.1.5591.1.3.3.1 | ScalarcommonMaxMulticastAddresses | read-only | mandatory | Maximum number of multicast data link layer addresses supported by this NE. |
| 1.3.6.1.4.1.5591.1.3.3.2 | TablecommonMulticastAddressTable | not-accessible | mandatory | The table containing the multicast addresses. The value for all objects in this table are maintained in non-volatile memory. |
| 1.3.6.1.4.1.5591.1.3.3.2.1 | RowcommonMulticastAddressEntry | not-accessible | mandatory | A list of information for multicast addresses. |
| 1.3.6.1.4.1.5591.1.3.3.2.1.1 | ColumncommonMulticastAddressIndex | read-only | mandatory | Index into commonMulticastAddressTable. |
| 1.3.6.1.4.1.5591.1.3.3.2.1.2 | ColumncommonMulticastAddressNumber | read-write | mandatory | The multicast address. Only entries with the I/G bit set are accepted values. An empty entry is designated by setting the object to the broadcast address. |
| 1.3.6.1.4.1.5591.1.3.4 | NodecommonStatsGroup | |||
| 1.3.6.1.4.1.5591.1.3.4.1 | NodecommonMacStats | |||
| 1.3.6.1.4.1.5591.1.3.4.1.1 | ScalarcommonForwardPathLOSEvents | read-write | optional | Count of forward path loss of signal (LOS) events. Can be reset to 0. |
| 1.3.6.1.4.1.5591.1.3.4.1.2 | ScalarcommonForwardPathFramingErrors | read-write | optional | Count of framing errors on the forward path. Can be reset to 0. |
| 1.3.6.1.4.1.5591.1.3.4.1.3 | ScalarcommonForwardPathCRCErrors | read-write | optional | Count of CRC errors on the forward path. Can be reset to 0. |
| 1.3.6.1.4.1.5591.1.3.4.1.4 | ScalarcommonInvalidMacCmds | read-write | optional | Count of invalid MAC commands. Can be reset to 0. |
| 1.3.6.1.4.1.5591.1.3.5 | NodecommonRfGroup | |||
| 1.3.6.1.4.1.5591.1.3.5.1 | ScalarcommonReturnPathFrequency | read-only | mandatory | Return path frequency. Units 1 Hz. The value for this object is maintained in non-volatile memory. |
| 1.3.6.1.4.1.5591.1.3.5.2 | ScalarcommonForwardPathFrequency | read-only | mandatory | Forward path frequency. Units 1 Hz. The value for this object is maintained in non-volatile memory. |
| 1.3.6.1.4.1.5591.1.3.5.3 | ScalarcommonProvisionedReturnPowerLevel | read-write | mandatory | Return path power level to be used. Units 0.1 dBmV. The value used internally will be rounded to the nearest supported value. The object reports the requested … |
| 1.3.6.1.4.1.5591.1.3.5.4 | ScalarcommonForwardPathReceiveLevel | read-only | optional | Returns the received forward path power level. Units 0.1 dBmV. |
| 1.3.6.1.4.1.5591.1.3.5.5 | ScalarcommonMaxReturnPower | read-write | mandatory | The maximum return path power to be used by the NE. Units 0.1 dBmV. The value for this object is maintained in non-volatile memory. |