SCTE-HMS-GEN-MIB
32 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| SCTE-HMS-ROOTS | genIdent |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5591.1.6.1 | ScalargenNumberOfGenerators | read-only | mandatory | Number of generators connected to this NE. |
| 1.3.6.1.4.1.5591.1.6.2 | TablegenDeviceTable | not-accessible | mandatory | Table containing information about the individual generators being monitored |
| 1.3.6.1.4.1.5591.1.6.2.1 | RowgenDeviceEntry | not-accessible | mandatory | List of information about each generator being monitored. |
| 1.3.6.1.4.1.5591.1.6.2.1.1 | ColumngenDeviceAddress | read-only | mandatory | Index into the psDeviceTable. Address of Generator on the RS-485 Path |
| 1.3.6.1.4.1.5591.1.6.2.1.2 | ColumngenProtocolVersion | read-only | mandatory | Version of the SCTE HMS protocol implemented in the monitored equipment. The 'Protocol Version' implementation will comply with the defined protocol in the SCT… |
| 1.3.6.1.4.1.5591.1.6.2.1.3 | ColumngenSoftwareVersion | read-only | mandatory | The contents of this field are vendor specific. The intent is to provide a text representation of the power supply or generator system software version. Any pr… |
| 1.3.6.1.4.1.5591.1.6.2.1.4 | ColumngenDeviceId | read-only | mandatory | The content of this field is vendor specific. The intent is to provide manufacturer and/or product specific ASCII text information that will propagate to the m… |
| 1.3.6.1.4.1.5591.1.6.2.1.5 | ColumngenGasHazardOption | read-only | mandatory | Defines if gas hazard sensor is installed. |
| 1.3.6.1.4.1.5591.1.6.2.1.6 | ColumngenWaterIntrusionOption | read-only | mandatory | Defines if water intrusion sensor is installed. |
| 1.3.6.1.4.1.5591.1.6.2.1.7 | ColumngenPadShearOption | read-only | mandatory | Defines if pad shear sensor is installed. |
| 1.3.6.1.4.1.5591.1.6.2.1.8 | ColumngenDoorOption | read-only | mandatory | Defines if separate generator door is installed. |
| 1.3.6.1.4.1.5591.1.6.2.1.9 | ColumngenChargerOption | read-only | mandatory | Defines if charger fail signal is supported. |
| 1.3.6.1.4.1.5591.1.6.2.1.10 | ColumngenFuelOption | read-only | mandatory | Defines if low fuel detection is supported. |
| 1.3.6.1.4.1.5591.1.6.2.1.11 | ColumngenVBatIgnitionOption | read-only | mandatory | Defines if engine ignition battery voltage is monitored. |
| 1.3.6.1.4.1.5591.1.6.2.1.12 | ColumngenTempOption | read-only | mandatory | Defines if engine enclosure temperature is monitored. |
| 1.3.6.1.4.1.5591.1.6.2.1.13 | ColumngenGeneratorStatus | read-only | mandatory | Defines the current state of generator operation. 1 = Off 2 = Running(test) 3 = Running 4 = Fail (A condition preventing the generator from functioning) This i… |
| 1.3.6.1.4.1.5591.1.6.2.1.14 | ColumngenGasHazard | read-only | mandatory | The concentration of hydrocarbon fuel in the generator enclosure has exceeded safe limits. Generator operation is suspended. The alarm is cleared when the sens… |
| 1.3.6.1.4.1.5591.1.6.2.1.15 | ColumngenWaterIntrusion | read-only | mandatory | Water level within the generator or fuel enclosure has exceeded safe limits for generator operation. Generator operation is suspended while this alarm is activ… |
| 1.3.6.1.4.1.5591.1.6.2.1.16 | ColumngenPadShear | read-only | mandatory | Indicates that the generator or fuel enclosure has shifted from its mounting position. Generator operation is suspended. The alarm is reset when the unit its r… |
| 1.3.6.1.4.1.5591.1.6.2.1.17 | ColumngenEnclosureDoor | read-only | mandatory | Indicates current status of the generator and/or auxiliary fuel enclosure door. This item requires entries in the discrete property table. |
| 1.3.6.1.4.1.5591.1.6.2.1.18 | ColumngenCharger | read-only | mandatory | Indicates if the ignition battery charger is operating. This item requires entries in the discrete property table. |
| 1.3.6.1.4.1.5591.1.6.2.1.19 | ColumngenFuel | read-only | mandatory | Indicates if the engine's fuel supply is sufficient for extended operation. Alarm is reset when fuel is replenished. This item requires entries in the discrete… |
| 1.3.6.1.4.1.5591.1.6.2.1.20 | ColumngenVBatIgnition | read-only | mandatory | Scaled representation of the generator's ignition battery in 1/100 Volts. This item requires an entry in the property table. |
| 1.3.6.1.4.1.5591.1.6.2.1.21 | ColumngenEnclosureTemperature | read-only | mandatory | Temperature inside generator's enclosure in degrees C. This item requires an entry in the property table. |
| 1.3.6.1.4.1.5591.1.6.2.1.22 | ColumngenEquipmentControl | read-write | optional | When written, the appropriate corresponding command action is sent to the generator. 1 = End generator test 2 = Start generator test 3 = Reset latched generato… |
| 1.3.6.1.4.1.5591.1.6.2.1.23 | ColumngenOilOption | read-only | mandatory | Defines if oil pressure is monitored. |
| 1.3.6.1.4.1.5591.1.6.2.1.24 | ColumngenMinorAlarmSupport | read-only | mandatory | Defines if the minor alarm indicator is supported. |
| 1.3.6.1.4.1.5591.1.6.2.1.25 | ColumngenMajorAlarmSupport | read-only | mandatory | Defines if the major alarm indicator is supported. |
| 1.3.6.1.4.1.5591.1.6.2.1.26 | ColumngenOil | read-only | optional | Indicates if the engine's oil is adequate for safe operation. Alarm is reset when the condition returns to normal. This item requires entries in the discrete p… |
| 1.3.6.1.4.1.5591.1.6.2.1.27 | ColumngenMinorAlarm | read-only | optional | Indicates if the generator is indicating a minor alarm. The generator requires attention, but does not require an immediate visit to the generator. This item r… |
| 1.3.6.1.4.1.5591.1.6.2.1.28 | ColumngenMajorAlarm | read-only | optional | Indicates if the generator is indicating a major alarm. The generator requires immediate attention, and should be visited immediately to remedy the situation. … |
| 1.3.6.1.4.1.5591.1.6.2.1.29 | ColumngenVendorOID | read-only | optional | This object provides a means for a vendor to point to a vendor specific extension of this MIB. |