SCTE-HMS-HEADENDIDENT-MIB
22 objects
The MIB module is for representing optical equipment present in the headend (or indoor) and is supported by a SNMP agent. This module defines the root OID (under the scteHmsTree) for the indoor optic device MIBs such as Optical transmitters, receivers, amplifiers etc. This module also defines textual conventions that are common across indoor devices.
Imported Objects
| SCTE-HMS-ROOTS | insidePlantIdent |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-IDENTITY Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5591.1.11.0 | IdentityheadEndIdentMib | The MIB module is for representing optical equipment present in the headend (or indoor) and is supported by a SNMP agent. This module defines the root OID (und… | ||
| 1.3.6.1.4.1.5591.1.11.1 | IdentityheOptics | current | Defines the base OID for the inside plant optical equipment (see SCTE 83-1, formerly HMS108) including, but not limited to, optical transmitters (see SCTE 85-1… | |
| 1.3.6.1.4.1.5591.1.11.2 | IdentityheBaseIdent | current | Defines the base OID for the common part of the inside plant equipment (see SCTE 84-1; formerly HMS111) including, but not limited to, power supplies (see SCTE… | |
| 1.3.6.1.4.1.5591.1.11.2.1 | IdentityheCommon | current | Defines the base OID for the modelling of all indoor equipment(see SCTE 84-1; formerly HMS111). | |
| 1.3.6.1.4.1.5591.1.11.2.2 | IdentityhePowerSupply | current | Defines the base OID for the modelling of indoor Power Supply(see SCTE 84-2; formerly HMS116). | |
| 1.3.6.1.4.1.5591.1.11.2.3 | IdentityheFans | current | Defines the base OID for the modelling of indoor Fans (see SCTE 84-3; formerly HMS117). | |
| 1.3.6.1.4.1.5591.1.11.3 | IdentityheHMTS | current | Defines the base of the HMTS (see SCTE 83-3; formerly HMS120). | |
| 1.3.6.1.4.1.5591.1.11.4 | IdentityheRF | current | Defines the base OID for the inside plant RF equipment (see SCTE 83-4, formerly HMS133) including, but not limited to, RF amplifiers (see SCTE 94-1, formerly H… | |
| 1.3.6.1.4.1.5591.1.11.5 | IdentityheDigital | current | Defines the base OID for the inside plant Digital devices including QAM, Encoders, Decoders, MPEG, IP etc .... | |
| 1.3.6.1.4.1.5591.1.11.6 | IdentityheManagedServer | current | Defines the base OID for the inside plant Managed Servers. Servers can be any machine that is used to serve data such as a video server, a timing server, a res… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HeFaultStatus | INTEGER { normal(1), fault(2) } | current | An enumerated value that provides a fault status of a particular hardware or software parameter that usually represent some sort of condition. A value normal(1) indicates the normal condition. A value fault(2) indicates… |
| HeHundredthNanoMeter | Unsigned32 | current | This data type represents wavelength values that are normally expressed in nano meters. Units are in hundredths of a NanoMeter; for example, 1550.56 nm will be represented as 155056. |
| HeHundredthWatts | Unsigned32 | current | This data type represents power values that are normally expressed in watts. Units are in hundredths of a watt; for example, 420 watts will be represented as 42000. |
| HeLaserType | DisplayString | current | Laser type. Some example values are: unisolated FP, isolated FP, uncooled DFB, cooled DFB, ITU (up to 32 colors). |
| HeMilliAmp | Unsigned32 | current | This data type represents current levels that are normally expressed in amperes. Units are in milliamperes; for example, 2.1 Amperes would be expressed as 2100. |
| HeOnOffControl | INTEGER { off(1), on(2), meaningless(3) } | current | An enumerated value that provides a control of a particular hardware or software parameter that usually represent some sort of switch. A SET request with a value off(1) will cause the switch to be shut off. A SET reques… |
| HeOnOffStatus | INTEGER { off(1), on(2) } | current | An enumerated value that provides a status of a particular hardware or software parameter that usually represent some sort of switch. A value off(1) indicates the switch is off. A value on(2) indicates the switch is on. |
| HeTenthCentigrade | Integer32 | current | This data type represents temperature values that are normally expressed in Centigrade. Units are in tenths of a Centigrade; for example, -5.1 Centigrade will be represented as -51. |
| HeTenthdB | Integer32 | current | This data type represents power levels that are normally expressed in dB. Units are in tenths of a dB; for example, -5.1 dB will be represented as -51. |
| HeTenthdBm | Integer32 | current | This data type represents power levels that are normally expressed in dBm. Units are in tenths of a dBm; for example, -5.1 dBm will be represented as -51. |
| HeTenthdBmV | Integer32 | current | This data type represents power levels that are normally expressed in dBmV. Units are in tenths of a dBmV; for example, -5.1 dBmV will be represented as -51. |
| HeTenthVolt | Integer32 | current | This data type represents voltage levels that are normally expressed in volts. Units are in tenths of a volt; for example, -48.1 volts will be represented as -481. |