SENAO-ENTERPRISE-INDOOR-AP-CB-MIB
109 objects
The MIB module defines Senao implementation-specific metrics useful in managing IEEE 802.11 on Senao devices. This is used as a supplement to the standard 802.11 MIB proposed by IEEE.
Imported Objects
| SNMPv2-SMI | Counter32 enterprises IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString MacAddress TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14125 | Identitysenao | The MIB module defines Senao implementation-specific metrics useful in managing IEEE 802.11 on Senao devices. This is used as a supplement to the standard 802.… | ||
| 1.3.6.1.4.1.14125.100 | NodeindoorWirelessDevice | |||
| 1.3.6.1.4.1.14125.100.1 | NodeentSystem | |||
| 1.3.6.1.4.1.14125.100.1.2 | ScalarentPassword | write-only | mandatory | Administration password |
| 1.3.6.1.4.1.14125.100.1.3 | ScalarentSysModel | read-only | mandatory | System model |
| 1.3.6.1.4.1.14125.100.1.4 | ScalarentSysMode | read-only | mandatory | System mode, 0:AP router, 1:Repeater, 2: AP bridge, 3: Client bridge, 4: Client router, 5: WDS bridge |
| 1.3.6.1.4.1.14125.100.1.5 | ScalarentSysUpTime | read-only | mandatory | System uptime |
| 1.3.6.1.4.1.14125.100.1.6 | ScalarentHwVersion | read-only | mandatory | The version of the hardware |
| 1.3.6.1.4.1.14125.100.1.7 | ScalarentSN | read-only | mandatory | Serial Number |
| 1.3.6.1.4.1.14125.100.1.8 | ScalarentKenelVersion | read-only | mandatory | The version of the kernel |
| 1.3.6.1.4.1.14125.100.1.9 | ScalarentAppVersion | read-only | mandatory | The version of the system application |
| 1.3.6.1.4.1.14125.100.1.10 | ScalarentReset | write-only | mandatory | Setting this attribute TRUE causes the AP rebooted |
| 1.3.6.1.4.1.14125.100.1.11 | ScalarentResetToDefault | write-only | mandatory | Setting this attribute TRUE will Reboot the system and change settings to factory default |
| 1.3.6.1.4.1.14125.100.1.12 | ScalarentApplyModules | write-only | mandatory | Setting this attribute TRUE will apply the changed modules to reload |
| 1.3.6.1.4.1.14125.100.2 | NodeentLAN | |||
| 1.3.6.1.4.1.14125.100.2.1 | ScalarentLANIP | read-write | mandatory | LAN IP address |
| 1.3.6.1.4.1.14125.100.2.2 | ScalarentLANSubnetMask | read-write | mandatory | LAN subnet mask |
| 1.3.6.1.4.1.14125.100.2.3 | ScalarentSTPEnable | read-write | mandatory | Set this attribute TRUE will enable 802.1d Spanning Tree. |
| 1.3.6.1.4.1.14125.100.2.4 | ScalarentDHCPEnable | read-write | mandatory | When system mode is not 1(Repeater) and 5(WDS bridge), set this attribute TRUE will enable the DHCP server function of device |
| 1.3.6.1.4.1.14125.100.2.5 | ScalarentIPPoolStart | read-write | mandatory | TWhen system mode is not 1(Repeater) and 5(WDS bridge), set the start address of DHCP IP pool |
| 1.3.6.1.4.1.14125.100.2.6 | ScalarentIPPoolEnd | read-write | mandatory | When system mode is not 1(Repeater) and 5(WDS bridge), set the end address of DHCP IP pool |
| 1.3.6.1.4.1.14125.100.2.7 | ScalarentIPLeaseTime | read-write | mandatory | When system mode is not 1(Repeater) and 5(WDS bridge), the time period client can have the IP address assigned by DHCP server 0(half hour), 1(one hour) 2(two h… |
| 1.3.6.1.4.1.14125.100.3 | NodeentWAN | |||
| 1.3.6.1.4.1.14125.100.3.1 | ScalarentRouterEnable | read-write | mandatory | Only When op mode is 0(AP) or (Client bridge), can set this attribute. Set TRUE will enable the router. |
| 1.3.6.1.4.1.14125.100.4 | NodeentMacFilter | |||
| 1.3.6.1.4.1.14125.100.4.1 | ScalarentLanMacFilteringEnable | read-write | mandatory | Set this attribute TRUE will enable the LAN MAC filtering |
| 1.3.6.1.4.1.14125.100.4.2 | ScalarentLanMacFilteringMode | read-write | mandatory | The mode of LAN MAC filtering can be 0(white list), 1(black list) |
| 1.3.6.1.4.1.14125.100.4.3 | TableentLanMacFilterTable | not-accessible | current | This table provides one row for each LAN MAC filtering. Each row contains the enterprise LAN MAC filtering table for that LAN MAC filtering. |
| 1.3.6.1.4.1.14125.100.4.3.1 | RowentLanMacFilterEntry | not-accessible | current | An entry in the entLanMacFilterTable. |
| 1.3.6.1.4.1.14125.100.4.3.1.1 | ColumnentMacAddressIndex | read-only | current | The auxiliary variable used to identify instances of columnar objects in the LAN MAC Filtering Table |
| 1.3.6.1.4.1.14125.100.4.3.1.2 | ColumnentMacAddress | read-only | current | MAC address list in the LAN MAC filtering table |
| 1.3.6.1.4.1.14125.100.4.3.1.3 | ColumnentMacFilteringValid | read-only | current | The validity status of each corresponding MAC address in LAN MAC filtering table |
| 1.3.6.1.4.1.14125.100.5 | NodeentWlan | |||
| 1.3.6.1.4.1.14125.100.5.1 | NodeentWlanCommonInfo | |||
| 1.3.6.1.4.1.14125.100.5.1.1 | ScalarentOpMode | read-write | mandatory | Set op mode: 0(AP), 1(Client bridge), 2(WDS bridge), 3(Repeater) |
| 1.3.6.1.4.1.14125.100.5.1.2 | ScalarentRadio | read-write | mandatory | Set this attribute TRUE will enable the radio |
| 1.3.6.1.4.1.14125.100.5.1.3 | ScalarentAPMode | read-write | mandatory | Only when op mode is 0(AP), we can set AP mode: 0(AP), 1(WDS) |
| 1.3.6.1.4.1.14125.100.5.1.4 | ScalarentBand | read-write | mandatory | The wireless mode: 0(802.11 b/g), 1(802.11 b), 2(802.11 a), 4(802.11 g), 6(802.11 n), 7(802.11 g/n), 8(802.11 a/n), 9(802.11 b/g/n) |
| 1.3.6.1.4.1.14125.100.5.1.5 | ScalarentESSIDNum | read-write | mandatory | Set the Number of multiple ESSID |
| 1.3.6.1.4.1.14125.100.5.1.6 | ScalarentChannel | read-write | mandatory | The current operating frequency channel |
| 1.3.6.1.4.1.14125.100.5.1.7 | ScalarentDataRate | read-write | mandatory | This attribute specifies the data rate at which the station may transmit data in Mbps 0(Auto), 1(1Mbps), 2(2Mbps), 5(5.5Mbps), 11(11Mbps), 6(6Mbps), 9(9Mbps), … |
| 1.3.6.1.4.1.14125.100.5.1.8 | ScalarentNDataRate | read-write | mandatory | This attribute specifies the 11n data rate |
| 1.3.6.1.4.1.14125.100.5.1.9 | ScalarentTxPower | read-write | mandatory | The transmit power level: 10(%), 25(%), 50(%), 75(%), 90(%), 100(%) |
| 1.3.6.1.4.1.14125.100.5.1.10 | ScalarentBeaconInterval | read-write | mandatory | This attribute specifies the number of TU that a station shall use for scheduling Beacon transmissions |
| 1.3.6.1.4.1.14125.100.5.1.11 | ScalarentDTIMPeriod | read-write | mandatory | This attribute specifies the number of beacon intervals |
| 1.3.6.1.4.1.14125.100.5.1.12 | ScalarentFragmentationThreshold | read-write | mandatory | This attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to the PHY |
| 1.3.6.1.4.1.14125.100.5.1.13 | ScalarentRTSThreshold | read-write | mandatory | This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. |
| 1.3.6.1.4.1.14125.100.5.1.14 | ScalarentChannelBandwidth | read-write | mandatory | This attribute specifies the channel bandwidth: 0(Auto 20/40 MHZ), 1(20 MHZ) |
| 1.3.6.1.4.1.14125.100.5.1.15 | ScalarentPreambleType | read-write | mandatory | This attribute specifies the preamble type: 1(Short), 2(Long) |
| 1.3.6.1.4.1.14125.100.5.1.16 | ScalarentCTSProtection | read-write | mandatory | This attribute specifies the CTS protection: 0(Auto), 1(Always), 2(None) |
| 1.3.6.1.4.1.14125.100.5.2 | TableentWlanESSIDInfoTable | not-accessible | current | This table provides one row for each ESSID information. Each row contains the enterprise ESSID information Table for that ESSID information. |
| 1.3.6.1.4.1.14125.100.5.2.1 | RowentWlanESSIDInfoEntry | not-accessible | current | An entry in the entWlanESSIDInfoTable. |
| 1.3.6.1.4.1.14125.100.5.2.1.1 | ColumnentWlanESSIDInfoIndex | read-only | current | The auxiliary variable used to identify instances of columnar objects in the ESSID information Table |
| 1.3.6.1.4.1.14125.100.5.2.1.2 | ColumnentESSID | read-write | current | This attribute reflects the Service Set ID used in the Desired- SSID parameter of the most recent MLME_Scan.request |
| 1.3.6.1.4.1.14125.100.5.2.1.3 | ColumnentBroadcastESSID | read-write | mandatory | Set this attribute TRUE will enable the hidden SSID |
| 1.3.6.1.4.1.14125.100.5.2.1.4 | ColumnentWMM | read-write | mandatory | Set this attribute TRUE will enable WMM |
| 1.3.6.1.4.1.14125.100.5.2.1.5 | ColumnentEncryption | read-write | current | The WLAN encryption: 0(none), 1(WEP), 2(TKIP), 3(AES), 4(TKIPAES) |
| 1.3.6.1.4.1.14125.100.5.2.1.6 | ColumnentWlanAuthenticationType | read-write | current | The current authentication algorithms: 0 (openSystem), 1(wepAuto), 2(sharedKey), 3(WPAPSK), 4(WPA), 5(WPA2PSK), 6(WPA2), 7(WPA1WPA2), 8(WPA1PSKWPA2PSK) |
| 1.3.6.1.4.1.14125.100.5.3 | TableentWlanWepInfoTable | not-accessible | current | This table provides one row for each WEP information. Each row contains the enterprise WEP information Table for that WEP information. |
| 1.3.6.1.4.1.14125.100.5.3.1 | RowentWlanWepInfoEntry | not-accessible | current | An entry in the entWlanWepInfoTable. |
| 1.3.6.1.4.1.14125.100.5.3.1.1 | ColumnentWlanESSIDIndex | read-only | current | The auxiliary variable used to identify instances of columnar objects in the WEP information Table |
| 1.3.6.1.4.1.14125.100.5.3.1.2 | ColumnentWlanWepKeyID | read-write | current | This attribute shall indicate the use of the first, second, third, or fourth element of the WEPDefaultKeys array |
| 1.3.6.1.4.1.14125.100.5.3.1.3 | ColumnentWlanWepKey1Value | read-write | current | Set key1 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| 1.3.6.1.4.1.14125.100.5.3.1.4 | ColumnentWlanWepKey2Value | read-write | current | Set key2 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| 1.3.6.1.4.1.14125.100.5.3.1.5 | ColumnentWlanWepKey3Value | read-write | current | Set key3 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| 1.3.6.1.4.1.14125.100.5.3.1.6 | ColumnentWlanWepKey4Value | read-write | current | Set key4 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| 1.3.6.1.4.1.14125.100.5.4 | TableentWlanWPAInfoTable | not-accessible | current | This table provides one row for each WPA information. Each row contains the enterprise WPA information Table for that WPA information. |
| 1.3.6.1.4.1.14125.100.5.4.1 | RowentWlanWPAInfoEntry | not-accessible | current | An entry in the entWlanWPAInfoTable. |
| 1.3.6.1.4.1.14125.100.5.4.1.1 | ColumnentWlanWPAESSIDIndex | read-only | current | The auxiliary variable used to identify instances of columnar objects in the WPA information Table |
| 1.3.6.1.4.1.14125.100.5.4.1.2 | ColumnentPresharedKey | write-only | current | The WPA Pre-Shared key. (8~63 ASCII or 64 HEX) |
| 1.3.6.1.4.1.14125.100.5.5 | Tableent802dot1xInfoTable | not-accessible | current | This table provides one row for each 802.1x information. Each row contains the enterprise 802.1x information Table for that 802.1x information. |
| 1.3.6.1.4.1.14125.100.5.5.1 | Rowent802dot1xInfoEntry | not-accessible | current | An entry in the ent802dot1xInfoTable. |
| 1.3.6.1.4.1.14125.100.5.5.1.1 | ColumnentWlan802dot1xESSIDIndex | read-only | current | The auxiliary variable used to identify instances of columnar objects in the 802.1x information Table |
| 1.3.6.1.4.1.14125.100.5.5.1.2 | ColumnentRADIUSServerIPAddress | read-write | current | The address of RADIUS Server |
| 1.3.6.1.4.1.14125.100.5.5.1.3 | ColumnentRADIUSServerPort | read-write | current | The port of RADIUS Server |
| 1.3.6.1.4.1.14125.100.5.5.1.4 | ColumnentRADIUSServerPassword | write-only | current | The password of RADIUS Server |
| 1.3.6.1.4.1.14125.100.5.5.1.5 | ColumnentWlan802dot1xEnable | read-write | current | Set this attribute TRUE will enable 802.1x |
| 1.3.6.1.4.1.14125.100.5.6 | TableentWlanClientListInfoTable | not-accessible | current | This table provides one row for Wlan client list information. |
| 1.3.6.1.4.1.14125.100.5.6.1 | RowentWlanClientListInfoEntry | not-accessible | current | An entry in the entWlanClientListInfoTable. |
| 1.3.6.1.4.1.14125.100.5.6.1.1 | ColumnentCLInfoIndex | read-only | current | The auxiliary variable used to identify instances of columnar objects in the ClientList information Table |
| 1.3.6.1.4.1.14125.100.5.6.1.2 | ColumnentCLInterface | read-write | current | The Client connected SSID |
| 1.3.6.1.4.1.14125.100.5.6.1.3 | ColumnentCLMAC | read-write | current | The Client MAC |
| 1.3.6.1.4.1.14125.100.5.6.1.4 | ColumnentCLRx | read-write | current | The Rx value |
| 1.3.6.1.4.1.14125.100.5.6.1.5 | ColumnentCLTx | read-write | current | The Tx value |
| 1.3.6.1.4.1.14125.100.5.6.1.6 | ColumnentCLSignal | read-write | current | The Client Wlan Signal |
| 1.3.6.1.4.1.14125.100.5.6.1.7 | ColumnentCLConnectedTime | read-write | current | The Client connected time |
| 1.3.6.1.4.1.14125.100.5.6.1.8 | ColumnentCLIdleTime | read-write | current | The Client idle time |
| 1.3.6.1.4.1.14125.100.6 | NodeentSNMP | |||
| 1.3.6.1.4.1.14125.100.6.1 | ScalarentSNMPStatus | read-write | mandatory | The status of current SNMP agent.0:disable, 1:Enable |
| 1.3.6.1.4.1.14125.100.6.2 | ScalarentSNMPVerType | read-write | mandatory | The version of current SNMP agent.0:all, 1: v1, 2:v2c, 3:v3 |
| 1.3.6.1.4.1.14125.100.6.3 | TableentSNMPCommunityTable | not-accessible | current | This table provides one row for each SNMP community. Each row contains the enterprise SNMP community table for that SNMP community. |
| 1.3.6.1.4.1.14125.100.6.3.1 | RowentSNMPCommunityEntry | not-accessible | current | An entry in the entSNMPCommunityTable. |
| 1.3.6.1.4.1.14125.100.6.3.1.1 | ColumnentSNMPCommunityIndex | read-only | current | The auxiliary variable used to identify instances of columnar objects in the SNMP Community Table |
| 1.3.6.1.4.1.14125.100.6.3.1.2 | ColumnentSNMPCommunityName | read-write | current | The community name used to access SNMP device. |
| 1.3.6.1.4.1.14125.100.6.3.1.3 | ColumnentSNMPCommunityType | read-only | current | The auxiliary variable used to identify instances of columnar objects in the SNMP Community Table |
| 1.3.6.1.4.1.14125.100.6.3.1.4 | ColumnentSNMPCommunityValid | read-only | current | Display the validity information of corresponding community index |
| 1.3.6.1.4.1.14125.100.6.4 | NodeentSNMPTrap | |||
| 1.3.6.1.4.1.14125.100.6.4.1 | ScalarentTrapStatus | read-write | mandatory | The trap status of current SNMP agent.0:disable, 1:Enable |
| 1.3.6.1.4.1.14125.100.6.4.2 | ScalarentTrapVer | read-write | mandatory | The trap version of current SNMP agent.0:all, 1: v1, 2:v2c, 3:v3 |
| 1.3.6.1.4.1.14125.100.6.4.3 | ScalarentTrapReceiverIPAddress | read-write | mandatory | Specify the IP address(host) to receive the trap report |
| 1.3.6.1.4.1.14125.100.6.4.4 | ScalarentTrapReceiverCommunityName | read-write | mandatory | Specify the community name for SNMP manager to receive the trap report |
| 1.3.6.1.4.1.14125.100.20 | NodeentTraps | |||
| 1.3.6.1.4.1.14125.100.20.1 | NodeentSystemTraps | |||
| 1.3.6.1.4.1.14125.100.20.1.1 | NotificationentSystemTrapsReboot | current | The trap is generated when the system is rebooted. | |
| 1.3.6.1.4.1.14125.100.20.1.2 | NotificationentSystemTrapsRestoreToDefault | current | The trap is generated when the default configuration of the system is restored. | |
| 1.3.6.1.4.1.14125.100.20.1.3 | NotificationentSystemTrapsReloadModules | current | The trap is generated when the system modules are reloaded. | |
| 1.3.6.1.4.1.14125.100.20.2 | NodeentWanTraps | |||
| 1.3.6.1.4.1.14125.100.20.2.1 | NotificationentWanTrapsLinkDisconnect | current | The trap is generated when the PHY of WAN is disconnected and it was connected. | |
| 1.3.6.1.4.1.14125.100.20.2.2 | NotificationentWanTrapsLinkRecover | current | The trap is generated when the PHY of WAN is connected and it was disconnected |