SENAO-WLAN-AP-MIB
56 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress mgmt NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.14125 | NodesenaoMIB | |||
| 1.3.6.1.4.1.14125.1 | NodesenaoRFC1213Group | |||
| 1.3.6.1.4.1.14125.1.1 | Nodeip | |||
| 1.3.6.1.4.1.14125.1.1.1 | ScalaripInReceives | read-only | mandatory | The total number of input datagrams received from interfaces, including those received in error. @GET-FUNC=get_ip_row |
| 1.3.6.1.4.1.14125.1.1.2 | ScalaripForwDatagrams | read-only | mandatory | The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward the… |
| 1.3.6.1.4.1.14125.1.2 | Nodeicmp | |||
| 1.3.6.1.4.1.14125.1.2.1 | ScalaricmpInMsgs | read-only | mandatory | The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors. @GET-FUNC=get_icmp_row |
| 1.3.6.1.4.1.14125.1.2.2 | ScalaricmpOutMsgs | read-only | mandatory | The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. @GET-FUNC=get_icmp_r… |
| 1.3.6.1.4.1.14125.1.3 | Nodetcp | |||
| 1.3.6.1.4.1.14125.1.3.1 | ScalartcpInSegs | read-only | mandatory | The total number of segments received, including those received in error. This count includes segments received on currently established connections. @GET-FUNC… |
| 1.3.6.1.4.1.14125.1.3.2 | ScalartcpOutSegs | read-only | mandatory | The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets. @GET-FUNC=get_tcp_row |
| 1.3.6.1.4.1.14125.1.4 | Nodeudp | |||
| 1.3.6.1.4.1.14125.1.4.1 | ScalarudpInDatagrams | read-only | mandatory | The total number of UDP datagrams delivered to UDP users. @GET-FUNC=get_udp_row |
| 1.3.6.1.4.1.14125.1.4.2 | ScalarudpOutDatagrams | read-only | mandatory | The total number of UDP datagrams sent from this entity. @GET-FUNC=get_udp_row |
| 1.3.6.1.4.1.14125.2 | NodestatusInformationGroup | |||
| 1.3.6.1.4.1.14125.2.1 | ScalarconnectedToSSID | read-write | mandatory | This attribute reflects the Service Set ID. This value may be modified by an external management entity and used by the local SME to make decisions about the S… |
| 1.3.6.1.4.1.14125.2.2 | ScalarusingChannel | read-only | mandatory | The operating frequency channel. Valid numbers are as defind in ISO/IEC 8802-11:1999, 15.4.6.2. @GET-FUNC=get_statusInfo_group |
| 1.3.6.1.4.1.14125.2.3 | ScalaraccessPointMACAddress | read-only | mandatory | The MAC address of the Access Point (BSS identifier) with which the radio should Connected or Associated. @GET-FUNC=get_statusInfo_group |
| 1.3.6.1.4.1.14125.2.4 | ScalarcurrentTransmissionRate | read-only | mandatory | The transmit bit rates operated, corresponding to data rates from 1 Mb/s to 54 Mb/s. @GET-FUNC=get_statusInfo_group |
| 1.3.6.1.4.1.14125.2.5 | ScalarcurrentIPAddress | read-only | mandatory | The IP address of this device used over its Ethernet interface in Routing mode or Bridge interface in Bridgeing mode. @GET-FUNC=get_statusInfo_group |
| 1.3.6.1.4.1.14125.2.6 | ScalarcurrentTXPower | read-write | mandatory | The Transmit Power of this device used. @GET-FUNC=get_statusInfo_group @SET-FUNC=set_statusInfo_group |
| 1.3.6.1.4.1.14125.3 | NodecountersGroup | |||
| 1.3.6.1.4.1.14125.3.1 | ScalarreceivedPacketsGoodCount | read-only | mandatory | The number of good packets received on the radio interface, including unicast, broadcast and multicast packets. @GET-FUNC=get_counters_group |
| 1.3.6.1.4.1.14125.3.2 | ScalarreceivedPacketsBadCount | read-only | mandatory | The number of inbound bad packets of the radio interface were chosen to be discarded even though no errors had been detected to prevent their being received. O… |
| 1.3.6.1.4.1.14125.3.3 | ScalarsendPacketsGoodCount | read-only | mandatory | The number of good packets transmitted on the radio interface, including unicast, broadcast and multicast packets. @GET-FUNC=get_counters_group |
| 1.3.6.1.4.1.14125.3.4 | ScalarsendPacketsBadCount | read-only | mandatory | The number of outbound bad packets of the radio interface were chosen to be discarded even though no errors had been detected to prevent their being transmitte… |
| 1.3.6.1.4.1.14125.4 | NodeprivacySettingsGroup | |||
| 1.3.6.1.4.1.14125.4.1 | ScalarwepEnabled | read-write | mandatory | When this attribute is enable, it shall indicate that the IEEE 802.11 WEP mechanism is used for transmitting frames of type Data. The default value of this att… |
| 1.3.6.1.4.1.14125.4.2 | ScalarwepKeyLength | read-write | mandatory | The length of WEP key that is used for transmitting and received frames of type Data. The value of 0 denotes WEP64bit Hex. Key; 1 stands for WEP128bit Hex. Key… |
| 1.3.6.1.4.1.14125.4.3 | ScalarwepKeyNumber | read-write | mandatory | This attribute shall indicate the use of the first, second, third, or fourth element of the WEPDefaultKeys array when set to values of 1, 2, 3, or 4. The defau… |
| 1.3.6.1.4.1.14125.4.4 | ScalarwepKey | read-write | mandatory | A WEP secret key value. 10 Hex. Keys for WEP 64Bits/26 Hex. Keys for WEP128Bits. @GET-FUNC=get_privacy_group @SET-FUNC=set_privacy_group |
| 1.3.6.1.4.1.14125.5 | NodesystemSettingsGroup | |||
| 1.3.6.1.4.1.14125.5.1 | ScalaroperationMode | read-only | mandatory | This defines the type of role of a wireless device. The device types are: Bridge(1) AP+WDS(2) @GET-FUNC=get_system_group |
| 1.3.6.1.4.1.14125.5.2 | ScalaripAddress | read-write | mandatory | The IP address of this device used over its Ethernet interface in AP mode. The IP address must NOT to set [x.x.x.0] or [x,x.x.255]. @GET-FUNC=get_system_group … |
| 1.3.6.1.4.1.14125.5.3 | ScalarsubnetMask | read-write | mandatory | The IP Network mask used by the IP entity when accessing devices through any of its Ethernet interface in Routing mode or Bridge interface in Bridgeing mode. T… |
| 1.3.6.1.4.1.14125.5.4 | ScalaripGateway | read-write | mandatory | The IP address of this device's Gateway. The value of IP Gateway must NOT set to 0 or 255 @GET-FUNC=get_system_group @SET-FUNC=set_system_group |
| 1.3.6.1.4.1.14125.5.5 | ScalardeviceName | read-write | mandatory | The description name of this device. The deviceName length is limit between 1~32 characters. @GET-FUNC=get_system_group @SET-FUNC=set_system_group |
| 1.3.6.1.4.1.14125.5.6 | ScalarsaveReboot | read-write | mandatory | Save and Reboot System. The save Reboot value must set to 1 when you enable this function. @GET-FUNC=get_system_group @SET-FUNC=set_system_group |
| 1.3.6.1.4.1.14125.6 | NodewebAdministratorSettingsGroup | |||
| 1.3.6.1.4.1.14125.6.1 | ScalaruserName | read-write | mandatory | User Name assigned to the system for use when authenticating with Web browser. The username length limit is 15 characters. @GET-FUNC=get_webAdmin_group @SET-FU… |
| 1.3.6.1.4.1.14125.6.2 | Scalarpassword | read-write | mandatory | User Password assigned to the system for use when authenticating with Web browser. The password length limit is 15 characters. @GET-FUNC=get_webAdmin_group @SE… |
| 1.3.6.1.4.1.14125.7 | NodedhcpSettingsGroup | |||
| 1.3.6.1.4.1.14125.7.1 | ScalardhcpEnabled | read-write | mandatory | When this attribute is enable, it shall indicate that the DHCP mechanism is used. The default value of this attribute shall be disable. @GET-FUNC=get_dhcp_grou… |
| 1.3.6.1.4.1.14125.7.2 | ScalardhcpLeaseTimes | read-write | mandatory | The value indicates how many minutes for DHCP lease time. The value should be set between 1 and 65535. @GET-FUNC=get_dhcp_group @SET-FUNC=set_dhcp_group |
| 1.3.6.1.4.1.14125.7.3 | ScalardhcpIPAddressFrom | read-write | mandatory | To set DHCP IP address range between dhcpIPAddressFrom and dhcpIPAddressTo. The IP address must NOT to set [x.x.x.0] or [x,x.x.255].And the DHCP address range … |
| 1.3.6.1.4.1.14125.7.4 | ScalardhcpIPAddressTo | read-write | mandatory | To set DHCP IP address range between dhcpIPAddressFrom and dhcpIPAddressTo. The IP address must NOT to set [x.x.x.0] or [x,x.x.255].And the DHCP address range … |
| 1.3.6.1.4.1.14125.8 | NodewdsSettingsGroup | |||
| 1.3.6.1.4.1.14125.8.1 | ScalarwdsEnabled | read-write | mandatory | When this attribute is enable, it shall indicate that the WDS mechanism is used. The default value of this attribute shall be disable. @GET-FUNC=get_wds_group … |
| 1.3.6.1.4.1.14125.8.2 | ScalarwdsAPMACAddress1 | read-write | mandatory | To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group … |
| 1.3.6.1.4.1.14125.8.3 | ScalarwdsAPMACAddress2 | read-write | mandatory | To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group … |
| 1.3.6.1.4.1.14125.8.4 | ScalarwdsAPMACAddress3 | read-write | mandatory | To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group … |
| 1.3.6.1.4.1.14125.8.5 | ScalarwdsAPMACAddress4 | read-write | mandatory | To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group … |
| 1.3.6.1.4.1.14125.8.6 | ScalarwdsAPMACAddress5 | read-write | mandatory | To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group … |
| 1.3.6.1.4.1.14125.8.7 | ScalarwdsAPMACAddress6 | read-write | mandatory | To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group … |
| 1.3.6.1.4.1.14125.8.8 | ScalarwdsKeyUsed | read-only | mandatory | WDS only supports None or WEP security mode. When this attribute is wep, it shall indicate that the IEEE 802.11 WEP mechanism is used for transmitting frames o… |
| 1.3.6.1.4.1.14125.8.9 | ScalarwdsKeyType | read-only | mandatory | WDS only supports None or WEP security mode. The length of WEP key that is used for transmitting and received frames of type Data. The value of 2 denotes WEP64… |