SIAE-DEBUG-MIB
37 objects
Maintenance of software releases loaded on SIAE equiment.
Imported Objects
| SIAE-ALARM-MIB | AlarmSeverityCode AlarmStatus alarmTrap |
| SIAE-EQUIP-MIB | equipIpSnmpAgentAddress |
| SIAE-TREE-MIB | siaeMib |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3373.1103.0.4103 | NotificationuploadDownloadFTPStatusTrap | current | This event is generated by ALFOHD-NE when the status of FTP transfer is changed. The data passed with the event are: 1) equipIpSnmpAgentAddress 2) UploadDownlo… | |
| 1.3.6.1.4.1.3373.1103.41 | Identitydebug | Maintenance of software releases loaded on SIAE equiment. | ||
| 1.3.6.1.4.1.3373.1103.41.1 | ScalardebugMibVersion | read-only | current | Numerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.0… |
| 1.3.6.1.4.1.3373.1103.41.2 | TabledeviceTable | not-accessible | current | Table with device (FPGA, Gate array...) records. |
| 1.3.6.1.4.1.3373.1103.41.2.1 | RowdeviceEntry | not-accessible | current | Device records. |
| 1.3.6.1.4.1.3373.1103.41.2.1.1 | ColumndeviceId | read-only | current | Device identifier is used as the index for the device table. |
| 1.3.6.1.4.1.3373.1103.41.2.1.2 | ColumndeviceType | read-write | current | Device type. Writing this object for a not existing deviceId (serial or parallel option) creates a new device record. 'delete' option deletes the existing devi… |
| 1.3.6.1.4.1.3373.1103.41.2.1.3 | ColumndeviceLabel | read-write | current | ASCII string used by the operator to identify the device. The default value is DEVICE-deviceId. |
| 1.3.6.1.4.1.3373.1103.41.2.1.4 | ColumndeviceStartAddressBase | read-write | current | With deviceStartAddressOffset it defines the device registry start address. |
| 1.3.6.1.4.1.3373.1103.41.2.1.5 | ColumndeviceStartAddressOffset | read-write | current | With deviceStartAddressBase it defines the device registry start address. |
| 1.3.6.1.4.1.3373.1103.41.2.1.6 | ColumndeviceEndAddressBase | read-write | current | With deviceEndAddressOffset it defines the device registry end address. |
| 1.3.6.1.4.1.3373.1103.41.2.1.7 | ColumndeviceEndAddressOffset | read-write | current | With deviceEndAddressBase it defines the device registry end address. |
| 1.3.6.1.4.1.3373.1103.41.3 | TablememoryTable | not-accessible | current | Table with memoryEntry records. |
| 1.3.6.1.4.1.3373.1103.41.3.1 | RowmemoryEntry | not-accessible | current | MemoryEntry record. |
| 1.3.6.1.4.1.3373.1103.41.3.1.1 | ColumnmemoryIdNumber | read-only | current | Memory Id is used as the index for the memory table Three records are automatically created at Sw start-up. |
| 1.3.6.1.4.1.3373.1103.41.3.1.2 | ColumnmemoryAddressBase | read-write | current | With memoryAddressOffset it defines the memory address. |
| 1.3.6.1.4.1.3373.1103.41.3.1.3 | ColumnmemoryAddressOffset | read-write | current | With memoryAddressBase it defines the memory address. |
| 1.3.6.1.4.1.3373.1103.41.3.1.4 | ColumnmemoryValue | read-write | current | Value (one byte) to be written at memoryAddrees. |
| 1.3.6.1.4.1.3373.1103.41.3.1.5 | ColumnmemoryDumpEnable | read-write | current | It is used to enable periodically memory dump. The 'enable-until-trigger' parameter changes in 'disable'parameter after the trigger. |
| 1.3.6.1.4.1.3373.1103.41.3.1.6 | ColumnmemoryDumpSize | read-write | current | It rappresent the number of bytes (max 256) to put im memoryDump parameter. |
| 1.3.6.1.4.1.3373.1103.41.3.1.7 | ColumnmemoryDump | read-only | current | It rappresents the memory area to read. The dump area begins from memoryAddress and it's long memoryDumpSize bytes. The dump don't exceed the lenght of FPGA. T… |
| 1.3.6.1.4.1.3373.1103.41.3.1.8 | ColumntriggerMemoryAddressBase | read-write | current | With memoryAddressOffset it defines the memory address to be checked for trigger. |
| 1.3.6.1.4.1.3373.1103.41.3.1.9 | ColumntriggerMemoryAddressOffset | read-write | current | With memoryAddressBase it defines the memory address to be checked for trigger. |
| 1.3.6.1.4.1.3373.1103.41.3.1.10 | ColumntriggerMemoryValue | read-write | current | Memory value (one byte) to be checked for trigger. |
| 1.3.6.1.4.1.3373.1103.41.3.1.11 | ColumntriggerMemoryMask | read-write | current | Memory Mask (one byte) to select the bits to be checked (0xFF means all bits). |
| 1.3.6.1.4.1.3373.1103.41.3.1.12 | ColumntriggerEnable | read-write | current | It is used to enable the trigger. Writing this object reset the trigger Alarms. |
| 1.3.6.1.4.1.3373.1103.41.3.1.13 | ColumntriggerAlarm | read-only | current | It reports to the trigger condition |
| 1.3.6.1.4.1.3373.1103.41.4 | ScalartriggerAlarmSeverityCode | read-write | current | Defines the severity associated to trigger Alarm and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.3373.1103.41.5 | ScalaruploadMemoryAddressBaseStart | read-write | current | With UploadMemoryAddressOffsetStart it defines the memory start address for the upload. |
| 1.3.6.1.4.1.3373.1103.41.6 | ScalaruploadMemoryAddressOffsetStart | read-write | current | With UploadMemoryAddressBaseStart it defines the memory start address for the upload. |
| 1.3.6.1.4.1.3373.1103.41.7 | ScalaruploadMemoryAddressBaseEnd | read-write | current | With UploadMemoryAddressOffsetEnd it defines the memory end address for the upload. |
| 1.3.6.1.4.1.3373.1103.41.8 | ScalaruploadMemoryAddressOffsetEnd | read-write | current | With UploadMemoryAddressBaseend it defines the memory end address for the upload. |
| 1.3.6.1.4.1.3373.1103.41.9 | ScalaruploadDownloadActionRequest | read-write | current | This object is used to upload/download the configuration file. |
| 1.3.6.1.4.1.3373.1103.41.10 | ScalaruploadDownloadFTPfile | read-write | current | Path and file name of the file to be uploaded or downloaded. |
| 1.3.6.1.4.1.3373.1103.41.11 | ScalaruploadDownloadFTPStatus | read-only | current | Status of upload/download operation. |
| 1.3.6.1.4.1.3373.1103.41.12 | ScalaruploadDownloadFTPStatusTrapNotification | read-write | current | Enables/disables the trap generation on FTP tranfer operation. |
| 1.3.6.1.4.1.3373.1103.41.13 | ScalardebugEnable | read-write | current | Debug enable. |