SIAE-LLF-MIB
28 objects
SIAE's Link Loss Forwarding MIB.
Imported Objects
| IF-MIB | InterfaceIndex |
| SIAE-ALARM-MIB | AlarmSeverityCode AlarmStatus |
| SIAE-TREE-MIB | siaeMib |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3373.1103.85 | Identityllf | SIAE's Link Loss Forwarding MIB. | ||
| 1.3.6.1.4.1.3373.1103.85.1 | ScalarllfMibVersion | read-only | current | Numerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.0… |
| 1.3.6.1.4.1.3373.1103.85.2 | TablellfTable | not-accessible | current | Table with SIAE's LLF entries. |
| 1.3.6.1.4.1.3373.1103.85.2.1 | RowllfEntry | not-accessible | current | SIAE's LLF entry. |
| 1.3.6.1.4.1.3373.1103.85.2.1.1 | ColumnllfIndex | not-accessible | current | A unique value, greater than zero, for each interface supporting LLF. This object is identical to the ifIndex of the standard MIB-2 ifTable. |
| 1.3.6.1.4.1.3373.1103.85.2.1.2 | ColumnllfEnable | read-create | current | On interfaces supporting LLF, this object is used to disable or enable LLF towards local LAN interfaces. |
| 1.3.6.1.4.1.3373.1103.85.2.1.3 | ColumnllfUnidirectionalFault | read-create | current | When enable is set, a local link fault causes LLF on both local and remote interfaces. |
| 1.3.6.1.4.1.3373.1103.85.2.1.4 | ColumnllfDelayTime | read-create | current | The LLF delay time specifies the time interval (in seconds) to wait for to actuate or to remove the Link Loss Forwarding condition. |
| 1.3.6.1.4.1.3373.1103.85.2.1.5 | ColumnllfProtectionMode | read-create | current | When protection mode is enabled, LLF alarm is issued only when all radio links or circuits connected to interface are alarmed. |
| 1.3.6.1.4.1.3373.1103.85.2.1.6 | ColumnllfAlarm | read-only | current | Interface Link Loss Forwarding alarm status. |
| 1.3.6.1.4.1.3373.1103.85.2.1.7 | ColumnllfRowStatus | read-create | current | Status of this row of llfTable. This object may not be set to destroy until at least a circuit belong to this LLF interface. In other words, circuits must be d… |
| 1.3.6.1.4.1.3373.1103.85.3 | TablellfMapTable | not-accessible | current | This table map llf interface on llf circuits. |
| 1.3.6.1.4.1.3373.1103.85.3.1 | RowllfMapEntry | not-accessible | current | SIAE's llf cross-connection entry. |
| 1.3.6.1.4.1.3373.1103.85.3.1.1 | ColumnllfMapLinkIndex | read-only | current | Radio link identifier. With llfMapPolIndex and llfMapCircuitIndex it points to a specific instance of llfCircuitTable. |
| 1.3.6.1.4.1.3373.1103.85.3.1.2 | ColumnllfMapPolIndex | read-only | current | Radio polarization identifier. With llfMapLinkIndex and llfMapCircuitIndex it points to a specific instance of llfCircuitTable. |
| 1.3.6.1.4.1.3373.1103.85.3.1.3 | ColumnllfMapCircuitIndex | read-only | current | LLF circuit identifier. With llfMapLinkIndex and llfMapPolIndex it points to a specific instance of llfCircuitTable. |
| 1.3.6.1.4.1.3373.1103.85.3.1.4 | ColumnllfMapLosInsertion | read-create | current | Enable or disable insertion of interface LOS into a specified circuit. The inserted LOS is transported through the radio link. |
| 1.3.6.1.4.1.3373.1103.85.3.1.5 | ColumnllfMapInsertionMode | read-create | current | In single mode, LOS is inserted in the circuit if the relative interface has a LOS alarm. In group mode, LOS is inserted when all (grouped) interfaces mapped t… |
| 1.3.6.1.4.1.3373.1103.85.3.1.6 | ColumnllfMapSignalFail | read-only | current | Alarm condition detected on specified circuit. |
| 1.3.6.1.4.1.3373.1103.85.3.1.7 | ColumnllfMapRowStatus | read-create | current | Status of this row of llfMapTable |
| 1.3.6.1.4.1.3373.1103.85.4 | TablellfCircuitTable | not-accessible | current | Table describing llf circuits available over each link. This circuits can be connected to available interfaces via llfMapTable. |
| 1.3.6.1.4.1.3373.1103.85.4.1 | RowllfCircuitEntry | not-accessible | current | SIAE's llf circuit entry. |
| 1.3.6.1.4.1.3373.1103.85.4.1.1 | ColumnllfCircuitLinkIndex | read-only | current | Radio link identifier. |
| 1.3.6.1.4.1.3373.1103.85.4.1.2 | ColumnllfCircuitPolIndex | read-only | current | Radio polarization identifier. |
| 1.3.6.1.4.1.3373.1103.85.4.1.3 | ColumnllfCircuitIndex | read-only | current | LLF circuit identifier. |
| 1.3.6.1.4.1.3373.1103.85.4.1.4 | ColumnllfCircuitLinkLabel | read-only | current | ASCII string used to assign a name to the radio link and polarization. |
| 1.3.6.1.4.1.3373.1103.85.4.1.5 | ColumnllfCircuitRowStatus | read-create | current | Status of this row of llfCircuitTable |
| 1.3.6.1.4.1.3373.1103.85.5 | ScalarllfAlarmSeverityCode | read-write | current | Defines the severity associated to the llfAlarm and enables/disables the trap generation on status change event. |