SIAE-RADIO-SYSTEM-MIB
348 objects
Radio System MIB.
Imported Objects
| IF-MIB | InterfaceIndexOrZero |
| SIAE-ALARM-MIB | AlarmSeverityCode AlarmStatus alarmTrap |
| SIAE-EQUIP-MIB | equipIpSnmpAgentAddress |
| SIAE-TREE-MIB | siaeMib |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus StorageType TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5 | IdentityradioSystem | clause | Radio System MIB. | |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.7 | TablelinkChTable | not-accessible | current | A list of link channel entries. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.7.1 | RowlinkChEntry | not-accessible | current | An entry containing management information applicable to a particular link channel. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.7.1.1 | ColumnlinkChIndex | read-only | current | Link Channel Index. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.7.1.2 | ColumnlinkChRadioIdx | read-create | current | Radio channel index that corresponds to an available radio interface in radioTable. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.7.1.3 | ColumnlinkChRadioSettingsIdx | read-create | current | Radio Settings Index. This object is a foreign key for a corresponding radioSettingsTable entry, which is automatically created by agent. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.7.1.4 | ColumnlinkChRowstatus | read-create | current | Status of this row of linkChTable. This object is used to manage the creation and deletion of conceptual rows in linkChTable. To create a row in this table, a … |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.8 | TablelinkSettingsTable | not-accessible | current | Table with link settings entries. This table contains all parameters of a radio frequency link. The content of this table can be changed by a manager if linkRo… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.8.1 | RowlinkSettingsEntry | not-accessible | current | Radio link entry |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.8.1.1 | ColumnlinkBandwidthAndModulation | read-create | current | Link Modulation and Bandwidth (channel spacing). The value of this object value is computed by: 65536*modulation+bandwidth where bandwidth selection is: 0 = 3.… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.8.1.2 | ColumnlinkAcmEngineEnable | read-create | current | This object is used to enable/disable the ACM engine |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.8.1.3 | ColumnlinkTxUpperProfile | read-create | current | The object (and linkTxLowerProfile object) is used to restrict the TX profile range when ACM is enabled. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.8.1.4 | ColumnlinkTxLowerProfile | read-create | current | The object (and linkTxUpperProfile object) is used to restrict the TX profile range when ACM is enabled. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.8.1.5 | ColumnlinkId | read-create | current | Link Identification (value 0..255) |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.8.1.6 | ColumnlinkTxPwrThresh | read-create | current | Threshold (value +3 , +15 dB) relative to nominal value of the TX power below wich the related alarm is set. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.8.1.7 | ColumnlinkRxPwrThresh | read-create | current | Threshold (value -40 , -99 dBm) for RX power below wich the related alarm is set. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.8.1.8 | ColumnlinkSynchSetupProtocolEnable | read-create | current | Synchronization Setup Protocol (SSP) control |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.8.1.9 | ColumnlinkProfilesSetSelection | read-create | current | Selection of the working profile set between high gain (max robustness) profile set and high throughput (max capacity) profile set. The set of profiles high ga… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.8.1.10 | ColumnlinkXpicControlProcedure | read-create | current | Set by manager to enable\disable XPIC alarm control procedure. Only for XPIC configurations. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.9 | TableradioSettingsTable | not-accessible | current | Table with radio settings entries. This table contains all parameters of a radio terminal. The content of this table can be changed only linkRowStatus is notIn… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.9.1 | RowradioSettingsEntry | not-accessible | current | Radio terminal entry |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.9.1.1 | ColumnradioSettingsIndex | read-only | current | Radio settings index. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.9.1.2 | ColumnradioSettingsRowStatus | read-create | current | Status of this row. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.9.1.3 | ColumnradioSettingsLabel | read-only | current | A textual string containing information about the radio interface. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.9.1.4 | ColumnradioTxFrequency | read-create | current | Transmitted frequency in KHz. Null value means invalid frequency. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.9.1.5 | ColumnradioDuplexFrequency | read-create | current | Value of duplex frequency in KHz. -2 means not set. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.9.1.6 | ColumnradioTxAttenuation | read-create | current | Transmitter attenuation relative to nominal power (dBm). |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.9.1.7 | ColumnradioAtpcManual | read-create | current | Enables/disables Atpc Manual operation. When the feature is enabled there are 2 behaviour: - (enable) after an air los the ODU transmits the maximum available … |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.9.1.8 | ColumnradioAtpcPwrHigh | read-create | current | ATPC Control - Local Rx Power High (dBm range -30 to -80) -. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.9.1.9 | ColumnradioAtpcPwrLow | read-create | current | ATPC Control - Local Rx Power Low (dBm range -30 to -80) -. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.9.1.10 | ColumnradioAtpcRange | read-create | current | Defines the range of the ATPC regulation (expressed in dB) with respect to the current value of maximum Tx output, that is intended as the upper limit of the r… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.9.1.11 | ColumnradioFreqTableSelection | read-create | current | RadioFrequencyTable key (channel spacing & modulation) selection. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.10 | TabletdmSettingsTable | not-accessible | current | Table with tdm settings entries. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.10.1 | RowtdmSettingsEntry | not-accessible | current | An entry containing tdm parameters for a particular link. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.10.1.1 | ColumntdmPolIndex | read-only | current | Polarization index. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.10.1.2 | ColumntdmE1Channel | read-write | current | Number of E1 channels. This object is used to define the capacity of E1 tributaries assigned to a given radio link. The capacity is changed in steps of E1 (2Mb… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.10.1.3 | ColumntdmE1Framer | read-write | current | This object is used to attach the framer to a given E1. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.11 | TableradioCapabilitiesTable | not-accessible | current | Table with RadioCapabilities entries: there is an entry for each radioTable rows. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.11.1 | RowradioCapabilitiesEntry | not-accessible | current | RadioCapabilities entry. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.11.1.1 | ColumnradioCapabilitiesCapability | read-only | current | Bit map to describe the radio features. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.11.1.2 | ColumnradioCapabilitiesTxMinFrequency | read-only | current | Minimum of available channel frequency in KHz. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.11.1.3 | ColumnradioCapabilitiesTxMaxFrequency | read-only | current | Maximum of available channel frequency in KHz. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.11.1.4 | ColumnradioCapabilitiesStepFrequency | read-only | current | Minimum frequency step in KHz. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.11.1.5 | ColumnradioCapabilitiesMinPtxNominalValue | read-only | current | Minimum nominal Ptx in dBm. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.11.1.6 | ColumnradioCapabilitiesMaxPtxNominalValue | read-only | current | Maximum nominal Ptx in dBm. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.11.1.7 | ColumnradioCapabilitiesExtendedMinPwr | read-only | current | Minimum extended Ptx power for fade margin. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12 | TableradioStatusTable | not-accessible | current | Table with RadioStatus records: one record for 1+0 configuration and two record for 1+1 configuration. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1 | RowradioStatusEntry | not-accessible | current | RadioStatus record. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.1 | ColumnradioCurrentDuplexFrequency | read-only | current | Spacing between transmitted and received frequency in KHz. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.2 | ColumnradioTxChannelSpacing | read-only | current | Half of transmitted signal channel spacing in KHz. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.3 | ColumnradioPrx | read-only | current | Received power level (dBm). |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.4 | ColumnradioPtx | read-only | current | Transmitted power level (dBm). |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.5 | ColumnradioNormalizedMse | read-only | current | Normalized MSE (Mean Squared Error) is an indicator of the Signal to Noise (S/N) ratio. It's in 0.1 dB steps |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.6 | ColumnradioRxActiveStatus | read-only | current | Receiver Active status with associated Severity In 1+1 Hot Standby radio system, only one RX is active. RXs are active in other configurations of the radio sys… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.7 | ColumnradioTxActiveStatus | read-only | current | Transmitter Active status with associated Severity. In 1+1 Hot Standby radio system, only one TX is active. TXs are active in other configurations of the radio… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.8 | ColumnradioCableOpenAlarm | read-only | current | Cable connnecting ODU is open: alarm status with associated severity. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.9 | ColumnradioCableShortAlarm | read-only | current | Cable connnecting ODU is in short-circuit: alarm status with associated severity. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.10 | ColumnradioInvalidFrequencyAlarm | read-only | current | Invalid frequency alarm with associated severity. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.11 | ColumnradioBaseBandRxAlarm | read-only | current | Base Band Rx alarm status with associated severity. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.12 | ColumnradioModulatorFailAlarm | read-only | current | Modulator Fail Alarm status with associated severity. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.13 | ColumnradioDemodulatorFailAlarm | read-only | current | Demodulator Fail Alarm status with associated severity. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.14 | ColumnradioRxPowerLowAlarm | read-only | current | Receiver power low alarm status with associated severity. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.15 | ColumnradioTxPowerLowAlarm | read-only | current | Transmitter power low alarm status with associated severity. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.16 | ColumnradioRemDemodulatorFailAlarm | read-only | current | Remote Demodulator Fail Alarm status with associated severity. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.17 | ColumnradioVcoFailAlarm | read-only | current | RT VCO fail alarm status with associated severity. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.18 | ColumnradioRxIFAgcAlarm | read-only | current | RT Rx IF AGC fail alarm status with associated severity. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.19 | ColumnradioTxIFAgcAlarm | read-only | current | RT Tx IF AGC fail alarm status with associated severity. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.20 | ColumnradioIduOduCommunicationAlarm | read-only | current | Communication from IDU towards ODU is down |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.21 | ColumnradioOduIduCommunicationAlarm | read-only | current | Communication from ODU towards IDU is down |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.22 | ColumnradioLocalOduAlarmSynthesis | read-only | current | Local ODU alarm synthesis with associated severity. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.23 | ColumnradioRemoteOduAlarmSynthesis | read-only | current | Local ODU alarm synthesis alarm status with associated severity. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.24 | ColumnradioConfigMismatchAlarm | read-only | current | Config Mismatch alarm status with associated severity and related map. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.25 | ColumnradioConfigAlarmReason | read-only | current | Bit map to describe the Config Mismatch Alarm |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.26 | ColumnradioRxQualityLowAlarm | read-only | current | High BER Alarm status with associated severity. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.27 | ColumnradioRxQualityWarningAlarm | read-only | current | The RX signal is close to cause errors on payload. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.28 | ColumnradioXpd | read-only | current | Cross-Polarization Discrimination, in tenths of dB, is the difference between the received signal power of the co-polarized main beam, and it componemt receive… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.12.1.29 | ColumnradioXpicAlarm | read-only | current | This alarm raises when the xpic configuration isn't working on the specified radioIndex. This could be due to an external issue in case of cable connection or … |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.13 | TableradioMaintTable | not-accessible | current | Table with Command for maintenance of radio branch. Objects in this table is not persistent. An Instance of this table is created on creation of radioBranchEnt… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.13.1 | RowradioMaintEntry | not-accessible | current | Radio branch Maintenance record. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.13.1.1 | ColumnradioTxStatus | read-write | current | Transmitter status control. The value transmitterOff(1) is related to a manual operation. The value permanentOff(3) is persistent across restart. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.13.1.2 | ColumnradioCarrierOnly | read-write | current | Carrier only transmission control. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.13.1.3 | ColumnradioLoop | read-write | current | Enables/disables the Radio Branch loops. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.13.1.4 | ColumnradioRFLoopTestResult | read-only | current | Radio branch RT loop test result. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.13.1.5 | ColumnradioRFLoopTestPercTime | read-only | current | Radio branch RT loop test time percentage |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.13.1.6 | ColumnradioRtPsuOff | read-write | current | It switches on/off the Rt power supply |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.13.1.7 | ColumnradioLom | read-write | current | It is used to enable the IP packet forwarding towards Radio. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.13.1.8 | ColumnradioXpic | read-write | current | Enable of the cross polarization interference cancellation of this radio. The value disable is tied to a manual operation (ManOpRecord). This object is applica… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.14 | TableradioFrequencyTable | not-accessible | current | Availables channels for selected channel spacing and modulation (see leaf radioFreqTableSelection). |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.14.1 | RowradioFreqTabEntry | not-accessible | current | RadioFreqTab record. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.14.1.1 | ColumnradioFreqChannelId | read-only | current | Index of the table |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.14.1.2 | ColumnradioFreqChannelNum | read-only | current | Available channel number. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.14.1.3 | ColumnradioFreqValue | read-only | current | Frequency related to radioFreqChannelNum. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.15 | TableradioDuplexFrequencyTable | not-accessible | current | Table with available duplex frequencies. Duplex frequency is the absolute value of difference between RX and TX frequency. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.15.1 | RowradioDuplexFreqEntry | not-accessible | current | Duplex Frequency entry. There is an entry for each available duplex frequency. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.15.1.1 | ColumnradioDuplexFreqId | read-only | current | Index of the table. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.15.1.2 | ColumnradioDuplexFreqValue | read-only | current | Duplex frequency in KHz. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.16 | TableradioModulationTable | not-accessible | current | List of modulations related to channel spacing. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.16.1 | RowradioModulationEntry | not-accessible | current | radioModulation record. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.16.1.1 | ColumnradioChannelSpacing | read-only | current | This object identifies the channel spacing. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.16.1.2 | ColumnradioModulationMap | read-only | current | List of modulations in the radioChanSpacing |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.16.1.3 | ColumnradioRefModulationMap | read-only | current | List of modulations that can be selected as reference in the radioChanSpacingId |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17 | TablelinkStatusTable | not-accessible | current | Table with LinkStatusEntry. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1 | RowlinkStatusEntry | not-accessible | current | Link status entry |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.1 | ColumnlinkPolIndex | read-only | current | This object identifies the radio polarization. In XPIC radio link identifies one of the polarizations. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.2 | ColumnlinkAcmRxProfile | read-only | current | This object reports the ACM profile number in use in the radio Rx. It is the linkAcmProfileId of linkAcmTable. Label is linkAcmProfileLabel from linkAcmTable |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.3 | ColumnlinkAcmTxProfile | read-only | current | This object reports the ACM profile number in use in the radio Tx. It is the linkAcmProfileId of linkAcmTable. Label is linkAcmProfileLabel from linkAcmTable |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.4 | ColumnlinkAcmRxProfileLabel | read-only | current | ASCII string used to describe current acm rx profile |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.5 | ColumnlinkAcmTxProfileLabel | read-only | current | ASCII string used to describe current acm tx profile |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.6 | ColumnlinkAcmRxModulation | read-only | current | This object is the type of modulation of the Rx profile in use. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.7 | ColumnlinkAcmTxModulation | read-only | current | This object is the type of modulation of the Tx profile in use. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.8 | ColumnlinkAcmRxCode | read-only | current | This object is the type of codificator of the Rx profile in use. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.9 | ColumnlinkAcmTxCode | read-only | current | This object is the type of codificator of the Tx profile in use. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.10 | ColumnlinkTxETHCapacity | read-only | current | This object reports (in Kbits/sec) the transmitted payload capacity used by the Ethernet |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.11 | ColumnlinkRxETHCapacity | read-only | current | This object reports (in Kbits/sec) the received payload capacity used by the Ethernet |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.12 | ColumnlinkTxTDMCapacity | read-only | current | This object reports the capacity in kbit/sec reserved to TDM tributaries in tx ACM profile. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.13 | ColumnlinkRxTDMCapacity | read-only | current | This object reports the capacity in kbit/sec reserved to TDM tributaries in rx ACM profile. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.14 | ColumnlinkRescueModulation | read-only | current | This object is the modulation used when the remote terminal is unreachable, ie traffic on radio link is down. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.15 | ColumnlinkReducedCapacityAlarm | read-only | current | The equipment works in reduced capacity |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.16 | ColumnlinkLinkTelemetryFailAlarm | read-only | current | Fail of link telemetry communication channel with associated Severity |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.17 | ColumnlinkIdMismatchAlarm | read-only | current | Link Identification Alarm with associated Severity |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.18 | ColumnlinkRadioEocAlarm | read-only | current | Fail of Radio Eoc link communication channel with associated Severity |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.19 | ColumnlinkSetupMismatchAlarm | read-only | current | The local setup doesn't match the setup of remote terminal |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.20 | ColumnlinkRescueSetupAlarm | read-only | current | The equipment is using the setup relative to the rescue modulation |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.21 | ColumnlinkXpicProcedureBlockAlarm | read-only | current | Only for XPIC equipment configurations. Equipment Controller XPIC procedure Alarm control with associated Severity |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.22 | ColumnlinkXpicRemTxOffAlarm | read-only | current | Only for XPIC equipment configurations. Remote TX OFF command with associated Severity |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.23 | ColumnlinkRemoteIduAlarmSynthesis | read-only | current | Synthesis of the remote IDU alarms |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.24 | ColumnlinkNotMatchingRadiosAlarm | read-only | current | Radios of the link does not have matched parameters. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.25 | ColumnlinkConfigurationInProgress | read-only | current | The link is being configured and the table linkSettingsTable is not available for modifying parameters. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.17.1.26 | ColumnlinkXpd | read-only | deprecated | Cross-Polarization Discrimination, in tenths of dB, is the difference between the received signal power of the co-polarized main beam, and it componemt receive… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.18 | TablelinkTfcTable | not-accessible | deprecated | Transmitter Fail Check feature. In 1+1 HS configuration, the radio terminal that doesn't receive signals on both receivers, requests the remote transmitter swi… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.18.1 | RowlinkTfcEntry | not-accessible | deprecated | Radio link TFC entry. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.18.1.1 | ColumnlinkTfcAction | read-create | deprecated | reset: to clear the forced switch generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.18.1.2 | ColumnlinkTfcControl | read-create | deprecated | It enables the Tx switch from remote equipment (only if 1+1 configuration and ISO system). |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.18.1.3 | ColumnlinkTfcWatchWindow | read-create | deprecated | Watch Window (in seconds) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.18.1.4 | ColumnlinkTfcAlarmThreshold | read-create | deprecated | Alarm Threshold (number of seconds with both remote RX in fail) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.18.1.5 | ColumnlinkTfcAlarm | read-only | deprecated | Transmission switch alarm generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.18.1.6 | ColumnlinkTfcRowStatus | read-create | deprecated | Status of this conceptual row in linkTfcTable. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.19 | TablelinkMaintTable | not-accessible | current | Table with commands for maintenance of radio link. Objects in this table is not persistent. An Instance of this table is created on creation of linkStatusEntry |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.19.1 | RowlinkMaintEntry | not-accessible | current | Radio link maintenance entry. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.19.1.1 | ColumnlinkBerStart | read-write | current | Stop, Start (resetting errors and counters) the pattern. This item is linked to a manual operation (ManOpRecord) instance. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.19.1.2 | ColumnlinkBaseBandLom | read-write | current | It is used to enable the IP packet forwarding towards modems. This item is linked to a manual operation (ManOpRecord) instance. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.19.1.3 | ColumnlinkFadeMarginMeasure | read-write | deprecated | Set by manager to start/stop fade margin measure. This item is linked to a manual operation (ManOpRecord) instance. This object is deprecated and replaced by f… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.19.1.4 | ColumnlinkXpicControlProcedureReset | read-write | current | Set by manager to reset the XPIC control procedure after a blocking action. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.20 | TablelinkBerTable | not-accessible | current | Table with Command to estimate BER of radio equipment. Every objects in this table is not persistent. An Instance of this table is created on creation of linkS… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.20.1 | RowlinkBerEntry | not-accessible | current | Radio equipment BER estimate record. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.20.1.1 | ColumnlinkBerErrorCounterH | read-only | current | High 32 bit part of the 64 bit error counter. Bit 32-63. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.20.1.2 | ColumnlinkBerErrorCounterL | read-only | current | Low 32 bit part of the 64 bit error counter. Bit 0-31. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.20.1.3 | ColumnlinkBerDataCounterH | read-only | current | High 32 bit part of the 64 bit data counter. Bit 32-63. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.20.1.4 | ColumnlinkBerDataCounterL | read-only | current | Low 32 bit part of the 64 bit data counter. Bit 0-31. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.20.1.5 | ColumnlinkBerSyncLossAlarm | read-only | current | BER sync loss alarm. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.20.1.6 | ColumnlinkBerSyncLossAlarmCounter | read-only | current | BER sync loss events counter. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.20.1.7 | ColumnlinkBerElapsedTime | read-only | current | BER measure elapsed time. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.21 | TablelinkAcmTable | not-accessible | current | Table with link records. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.21.1 | RowlinkAcmEntry | not-accessible | current | ACM entries. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.21.1.1 | ColumnlinkAcmProfileId | read-only | current | This object identifies the profile number for the radio selected by the object linkAcmId. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.21.1.2 | ColumnlinkAcmProfileModulation | read-only | current | This object is the modulation of the profile. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.21.1.3 | ColumnlinkAcmProfileCode | read-only | current | This object is the type of codificator of the profile. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.21.1.4 | ColumnlinkAcmProfileCapacity | read-only | current | This object is used to contain total capacity of profile (in kbits/sec). |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.21.1.5 | ColumnlinkAcmProfileLabel | read-write | current | ASCII string used to assign a name to profile. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.21.1.6 | ColumnlinkAcmProfileEnable | read-only | current | The object is used to contain if the use of this profile is enabled or disabled |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.21.1.7 | ColumnlinkAcmMaxTDMCapacity | read-only | deprecated | This object reports the maximum capacity that can be assigned to the TDM traffic. The capacity is specified in number of E1 (2Mbit/s). This object has been sup… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.21.1.8 | ColumnlinkAcmPowerScaling | read-only | deprecated | This object contains the difference (in eighth of dB) between the TX power at this profile modulation and the TX power at the reference modulation. The power s… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.21.1.9 | ColumnlinkAcmDownshiftThreshold | read-only | current | The object is used to contain the downshift threshold in dB/10. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.21.1.10 | ColumnlinkAcmUpshiftThreshold | read-only | current | The object is used to contain the upshift threshold in dB/10. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.21.1.11 | ColumnlinkAcmActiveProfile | read-only | current | This object is used to contain the active status of this profile. The value of the object is related to linkAcmRxProfile and linkAcmTxProfile of the LinkStatus… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.21.1.12 | ColumnlinkAcmTDMCapacity | read-only | current | This object reports current TDM capacity (in kbits/sec) of the profile. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.21.1.13 | ColumnlinkAcmETHCapacity | read-only | current | This object reports current ETH capacity (in Kbits/sec) of the profile. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.21.1.14 | ColumnlinkAcmAtpcRxPowerScaling | read-only | deprecated | This object contains the difference (in eighth of dB) between the ATPC RX level thresholds at this profile modulation and the ATPC RX level thresholds at the u… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.21.1.15 | ColumnlinkAcmPowerRange | read-only | deprecated | This object contains (in dB) the current value of ATPC range. This object is deprecated: see combinedRadioPowerScalingTable. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.22 | TablelinkProTable | not-accessible | deprecated | A list of protection link entries. This table was deprecated and replaced by linkProV2Table. It is a view of the rows of the linkProV2Table with the same linkI… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.22.1 | RowlinkProEntry | not-accessible | deprecated | An entry containing management information applicable to a protected link. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.22.1.1 | ColumnlinkProProtectionTxChIdx | read-create | deprecated | This object identifies the tx protection channel of a protected link. This object is not applicable in case of not-revertive protection. For N+1 links a value … |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.22.1.2 | ColumnlinkProProtectionRxChIdx | read-create | deprecated | This object identifies the rx protection channel of a protected link. This object is not applicable in case of not-revertive protection. For N+1 links a value … |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.22.1.3 | ColumnlinkProTxWtrTime | read-create | deprecated | It defines the Wait Time (in minutes) to Restore in transmission when revertive protection is enabled. Zero value means no switch. If switch is not supported o… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.22.1.4 | ColumnlinkProRxWtrTime | read-create | deprecated | It defines the Wait Time (in minutes) to Restore in reception when revertive protection is enabled. Zero value means no switch. If switch is not supported or p… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.22.1.5 | ColumnlinkProTxSwitchedChIdx | read-only | deprecated | This object reports the index of tx channel switched to protection. This object is applicable only for N+1 protection schema. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.22.1.6 | ColumnlinkProRxSwitchedChIdx | read-only | deprecated | This object reports the index of rx channel switched to protection. This object is applicable only for N+1 protection schema. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.22.1.7 | ColumnlinkProTxRevertive | read-create | deprecated | It defines if tx protection is revertive or not revertive. In case of N+1 protection, protection is always revertive. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.22.1.8 | ColumnlinkProRxRevertive | read-create | deprecated | It defines if rx protection is revertive or not revertive. In case of N+1 protection, protection is always revertive. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.22.1.9 | ColumnlinkProExtraTraffic | read-create | deprecated | This object enables or disables the transfer of extra traffic on the protection channel in a N+1 link. This object must be set to disabled in case of architect… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.22.1.10 | ColumnlinkProRowStatus | read-create | deprecated | Status of this conceptual row in linkProTable. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.23 | TablelinkProMaintTable | not-accessible | deprecated | A list of maintenance commands for protected links. A row in this table is added on creation of a row in linkProTable. This table was deprecated and replaced b… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.23.1 | RowlinkProMaintEntry | not-accessible | deprecated | An entry containing maintenance commands applicable to a protected link. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.23.1.1 | ColumnlinkProMaintTxLockout | read-write | deprecated | Command to enable/disable tx lockout. This object is applicable only in case of N+1 protections. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.23.1.2 | ColumnlinkProMaintRxLockout | read-write | deprecated | Command to enable/disable rx lockout. This object is applicable only in case of N+1 protections. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.23.1.3 | ColumnlinkProMaintTxForced | read-write | deprecated | Command to force switch to a given transmission channel. Zero value means no switch. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.23.1.4 | ColumnlinkProMaintRxForced | read-write | deprecated | Command to force switch to a given receiving channel. Zero value means no switch. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.23.1.5 | ColumnlinkProMaintTxWtrReset | read-write | deprecated | Clear wait time to restore making the revertive path immediately available. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.23.1.6 | ColumnlinkProMaintRxWtrReset | read-write | deprecated | Clear wait time to restore making the revertive path immediately available. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.24 | TablelinkCapabilitiesTable | not-accessible | deprecated | Table with RadioCapabilities entries: there is an entry for each linkTable row. In 1+1 HS and XPIC radio links, this table contains only values supported by bo… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.24.1 | RowlinkCapabilitiesEntry | not-accessible | deprecated | LinkCapabilities entry. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.24.1.1 | ColumnlinkCapabilitiesCapability | read-only | deprecated | Bit map to describe the radio features. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.24.1.2 | ColumnlinkCapabilitiesTxMinFrequency | read-only | deprecated | Minimum of available channel frequency in KHz. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.24.1.3 | ColumnlinkCapabilitiesTxMaxFrequency | read-only | deprecated | Maximum of available channel frequency in KHz. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.24.1.4 | ColumnlinkCapabilitiesStepFrequency | read-only | deprecated | Minimum frequency step in KHz. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.24.1.5 | ColumnlinkCapabilitiesMinPtxNominalValue | read-only | deprecated | Minimum nominal Ptx in dBm. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.24.1.6 | ColumnlinkCapabilitiesMaxPtxNominalValue | read-only | deprecated | Maximum nominal Ptx in dBm. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.24.1.7 | ColumnlinkCapabilitiesExtendedMinPwr | read-only | deprecated | Minimum extended Ptx power for fade margin. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.25 | TablelinkFrequencyTable | not-accessible | deprecated | Availables channels for selected channel spacing and modulation In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. In 1+… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.25.1 | RowlinkFreqTabEntry | not-accessible | deprecated | LinkFreqTab record. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.25.1.1 | ColumnlinkFreqChannelId | read-only | deprecated | Index of the table |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.25.1.2 | ColumnlinkFreqChannelNum | read-only | deprecated | Available channel number. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.25.1.3 | ColumnlinkFreqValue | read-only | deprecated | Frequency related to linkFreqChannelNum. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.26 | TablelinkDuplexFrequencyTable | not-accessible | deprecated | Table with available duplex frequencies. Duplex frequency is the absolute value of difference between RX and TX frequency. In 1+1 HS and XPIC radio links, this… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.26.1 | RowlinkDuplexFreqEntry | not-accessible | deprecated | Duplex Frequency entry. For each available duplex frequency |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.26.1.1 | ColumnlinkDuplexFreqId | read-only | deprecated | Index of the table. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.26.1.2 | ColumnlinkDuplexFreqValue | read-only | deprecated | Duplex frequency in KHz. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.27 | TablelinkModulationTable | not-accessible | current | List of modulation related to channel spacing. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.27.1 | RowlinkModulationEntry | not-accessible | current | linkModulation record. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.27.1.1 | ColumnlinkChannelSpacing | read-only | current | This object identifies the channel spacing. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.27.1.2 | ColumnlinkModulationMap | read-only | current | List of modulation in the linkChanSpacing |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.27.1.3 | ColumnlinkRefModulationMap | read-only | current | List of modulations that can be selected as reference in the linkChanSpacingId |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.28 | TablecombinedRadioCapabilitiesTable | not-accessible | current | Table with RadioCapabilities entries: there is an entry for each radioSettingTable row. In 1+1 HS and XPIC radio links, this table contains only values support… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.28.1 | RowcombinedRadioCapabilitiesEntry | not-accessible | current | combinedRadioCapabilities entry. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.28.1.1 | ColumncombinedRadioCapabilitiesCapability | read-only | current | Bit map to describe the radio features. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.28.1.2 | ColumncombinedRadioCapabilitiesTxMinFrequency | read-only | current | Minimum of available channel frequency in KHz. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.28.1.3 | ColumncombinedRadioCapabilitiesTxMaxFrequency | read-only | current | Maximum of available channel frequency in KHz. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.28.1.4 | ColumncombinedRadioCapabilitiesStepFrequency | read-only | current | Minimum frequency step in KHz. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.28.1.5 | ColumncombinedRadioCapabilitiesMinPtxNominalValue | read-only | current | Minimum nominal Ptx in dBm. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.28.1.6 | ColumncombinedRadioCapabilitiesMaxPtxNominalValue | read-only | current | Maximum nominal Ptx in dBm. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.28.1.7 | ColumncombinedRadioCapabilitiesExtendedMinPwr | read-only | current | Minimum extended Ptx power for fade margin. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.29 | TablecombinedRadioFrequencyTable | not-accessible | current | Availables channels for selected channel spacing and modulation In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.29.1 | RowcombinedRadioFreqTabEntry | not-accessible | current | combinedRadioFreqTab record. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.29.1.1 | ColumncombinedRadioFreqChannelId | read-only | current | Index of the table |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.29.1.2 | ColumncombinedRadioFreqChannelNum | read-only | current | Available channel number. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.29.1.3 | ColumncombinedRadioFreqValue | read-only | current | Frequency related to combinedRadioFreqChannelNum. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.30 | TablecombinedRadioDuplexFrequencyTable | not-accessible | current | Table with available duplex frequencies. Duplex frequency is the absolute value of difference between RX and TX frequency. In 1+1 HS and XPIC radio links, this… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.30.1 | RowcombinedRadioDuplexFreqEntry | not-accessible | current | Duplex Frequency entry. There is an entry for each available duplex frequency. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.30.1.1 | ColumncombinedRadioDuplexFreqId | read-only | current | Index of the table. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.30.1.2 | ColumncombinedRadioDuplexFreqValue | read-only | current | Duplex frequency in KHz. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.31 | TablecombinedRadioPowerScalingTable | not-accessible | current | List of modulation related to channel spacing. In 1+1 HS and XPIC radio links, this table contains only values supported by both radios. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.31.1 | RowcombinedRadioPowerScalingEntry | not-accessible | current | radioPowerScaling record. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.31.1.1 | ColumncombinedRadioPowerScaling | read-only | current | This object contains the difference (in eighth of dB) between the TX power at this profile modulation and the TX power at the reference modulation. The power s… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.31.1.2 | ColumncombinedRadioAtpcRxPowerScaling | read-only | current | This object contains the difference (in eighth of dB) between the ATPC RX level thresholds at this profile modulation and the ATPC RX level thresholds at the u… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.31.1.3 | ColumncombinedRadioPowerRange | read-only | current | This object contains (in dB) the current value of ATPC range. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.32 | Tablestm1BulkMappingTable | not-accessible | current | Table with entries containing stm-1 bulk transport parameters for a particular link. For each link are present as many rows as the STM-1 that the link can carr… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.32.1 | Rowstm1BulkMappingEntry | not-accessible | current | An row in stm1BulkSettingsTable. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.32.1.1 | Columnstm1BulkPolIndex | read-only | current | Polarization index. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.32.1.2 | Columnstm1BulkChanIndex | read-only | current | STM-1 channel index. The range of this object is from 1 to N, where N is the number of STM-1 that a link can carry in bulk mode. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.32.1.3 | Columnstm1BulkChannel | read-write | current | Index of the stm-1 in stm1Table. The SNMP agent will accept only index of a STM-1 present in stm1Table with stm1Structure set to opaque(4). |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.33 | TablelinkE1vsSTM1CapacityTable | not-accessible | current | Table with entries containing the E1 cpacity according to the tributaries STM-1 configured to be carried in bulk mode. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.33.1 | RowlinkE1vsSTM1CapacityEntry | not-accessible | current | An row in linkE1vsSTM1CapacityTable. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.33.1.1 | ColumnlinkE1vsSTM1CapacityStm1 | not-accessible | current | Number of tributaries STM-1 configured to be transported in bulk mode. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.33.1.2 | ColumnlinkE1vsSTM1CapacityE1 | read-only | current | Number of E1 that can be carried by this profile according to the the tributaries STM-1 carried in bulk mode. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.34 | TablelinkTfcV2Table | not-accessible | current | Transmitter Fail Check feature. In 1+1 HS configuration, the radio terminal that doesn't receive signals on both receivers, requests the remote transmitter swi… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.34.1 | RowlinkTfcV2Entry | not-accessible | current | Radio link TFC entry. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.34.1.1 | ColumnlinkTfcV2Action | read-create | current | reset: to clear the forced switch generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.34.1.2 | ColumnlinkTfcV2Control | read-create | current | It enables the Tx switch from remote equipment (only if 1+1 configuration and ISO system). |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.34.1.3 | ColumnlinkTfcV2WatchWindow | read-create | current | Watch Window (in seconds) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.34.1.4 | ColumnlinkTfcV2AlarmThreshold | read-create | current | Alarm Threshold (number of seconds with both remote RX in fail) related to Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.34.1.5 | ColumnlinkTfcV2Alarm | read-only | current | Transmission switch alarm generated by Trasmission Fail Check algorithm (only if 1+1 configuration and ISO system). |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.34.1.6 | ColumnlinkTfcV2RowStatus | read-create | current | Status of this conceptual row in linkTfcV2Table. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.35 | TablelinkProV2Table | not-accessible | current | A list of protection link entries. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.35.1 | RowlinkProV2Entry | not-accessible | current | An entry containing management information applicable to a protected link. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.35.1.1 | ColumnlinkProV2ProtectionTxChIdx | read-create | current | This object identifies the tx protection channel of a protected link. This object is not applicable in case of not-revertive protection. For N+1 links a value … |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.35.1.2 | ColumnlinkProV2ProtectionRxChIdx | read-create | current | This object identifies the rx protection channel of a protected link. This object is not applicable in case of not-revertive protection. For N+1 links a value … |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.35.1.3 | ColumnlinkProV2TxWtrTime | read-create | current | It defines the Wait Time (in minutes) to Restore in transmission when revertive protection is enabled. Zero value means no switch. If switch is not supported o… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.35.1.4 | ColumnlinkProV2RxWtrTime | read-create | current | It defines the Wait Time (in minutes) to Restore in reception when revertive protection is enabled. Zero value means no switch. If switch is not supported or p… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.35.1.5 | ColumnlinkProV2TxSwitchedChIdx | read-only | current | This object reports the index of tx channel switched to protection. This object is applicable only for N+1 protection schema. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.35.1.6 | ColumnlinkProV2RxSwitchedChIdx | read-only | current | This object reports the index of rx channel switched to protection. This object is applicable only for N+1 protection schema. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.35.1.7 | ColumnlinkProV2TxRevertive | read-create | current | It defines if tx protection is revertive or not revertive. In case of N+1 protection, protection is always revertive. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.35.1.8 | ColumnlinkProV2RxRevertive | read-create | current | It defines if rx protection is revertive or not revertive. In case of N+1 protection, protection is always revertive. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.35.1.9 | ColumnlinkProV2ExtraTraffic | read-create | current | This object enables or disables the transfer of extra traffic on the protection channel in a N+1 link. This object must be set to disabled in case of architect… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.35.1.10 | ColumnlinkProV2RowStatus | read-create | current | Status of this conceptual row in linkProV2Table. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.36 | TablelinkProMaintV2Table | not-accessible | current | A list of maintenance commands for protected links. A row in this table is added on creation of a row in linkProV2Table. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.36.1 | RowlinkProMaintV2Entry | not-accessible | current | An entry containing maintenance commands applicable to a protected link. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.36.1.1 | ColumnlinkProMaintV2TxLockout | read-write | current | Command to enable/disable tx lockout. This object is applicable only in case of N+1 protections. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.36.1.2 | ColumnlinkProMaintV2RxLockout | read-write | current | Command to enable/disable rx lockout. This object is applicable only in case of N+1 protections. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.36.1.3 | ColumnlinkProMaintV2TxForced | read-write | current | Command to force switch to a given transmission channel. Zero value means no switch. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.36.1.4 | ColumnlinkProMaintV2RxForced | read-write | current | Command to force switch to a given receiving channel. Zero value means no switch. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.36.1.5 | ColumnlinkProMaintV2TxWtrReset | read-write | current | Clear wait time to restore making the revertive path immediately available. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.36.1.6 | ColumnlinkProMaintV2RxWtrReset | read-write | current | Clear wait time to restore making the revertive path immediately available. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.37 | TablesspTable | not-accessible | current | A list of operative and administrative set of parameters. This table holds three row for every link (and its polarizations) configured in the NE: 1) administat… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.37.1 | RowsspEntry | not-accessible | current | An entry containing SSP relevant parameters. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.37.1.1 | ColumnsspParameterType | not-accessible | current | This object identifies what parameters are for. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.37.1.2 | ColumnsspLinkBandwidth | read-only | current | Link Bandwidth (channel spacing). |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.37.1.3 | ColumnsspLinkModulation | read-only | current | Link reference modulation. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.37.1.4 | ColumnsspLinkAcmEngineEnable | read-only | current | This object is used to enable/disable the ACM engine. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.37.1.5 | ColumnsspLinkTxUpperProfile | read-only | current | The object (and linkTxLowerProfile object) is used to restrict the TX profile range when ACM is enabled. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.37.1.6 | ColumnsspLinkTxLowerProfile | read-only | current | The object (and linkTxUpperProfile object) is used to restrict the TX profile range when ACM is enabled. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.37.1.7 | ColumnsspLinkSynchSetupProtocolEnable | read-only | current | Synchronization Setup Protocol (SSP) control. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.37.1.8 | ColumnsspLinkProfilesSetSelection | read-only | current | Selection of the working profile set between high gain (max robustness) profile set and high throughput (max capacity) profile set. The set of profiles high ga… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.37.1.9 | ColumnsspTdmE1Channel | read-only | current | Number of E1 channels. This object is used to define the capacity of E1 tributaries assigned to a given radio link. The capacity is changed in steps of E1 (2Mb… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.37.1.10 | ColumnsspTdmStm1Channel | read-only | current | Number of STM-1 channels transported in bulk mode. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.38 | TableradioLoopCapabilityTable | not-accessible | current | This table shows which group a radio loop belongs to. Radios with the same group number (identifier) close loop simultaneously. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.38.1 | RowradioLoopCapabilityEntry | not-accessible | current | An entry containing a group identifier for each radio loop type. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.38.1.1 | ColumnradioLoopRfGroup | read-only | current | The group to which the radio RF loop belong to. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.38.1.2 | ColumnradioLoopIqGroup | read-only | current | The group to which the radio IQ loop belong to. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.38.1.3 | ColumnradioLoopBaseBandGroup | read-only | current | The group to which the radio base loop belong to. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.39 | TableradioRxBerThresholdTable | not-accessible | current | This table shows the nominal and measured values of RX power at a bit error rate (BER) equal to 10e-6. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.39.1 | RowradioRxBerThresholdEntry | not-accessible | current | An entry containing the RX power thresholds. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.39.1.1 | ColumnradioRxBerThresholdStatus | read-only | current | This object shows whether the following objects are significant. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.39.1.2 | ColumnradioNominalRxBerThreshold | read-only | current | The nominal value of RX power @ BER equal to 10e-6 |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.39.1.3 | ColumnradioMeasuredRxBerThreshold | read-only | current | The measured value of RX power @ BER equal to 10e-6. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.40 | TableradioEchoCancelerTable | not-accessible | current | Table with radio settings entries for Echo Canceler procedure. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.40.1 | RowradioEchoCancelerEntry | not-accessible | current | Radio echo canceler. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.40.1.1 | ColumnradioEchoCancelerFunctionEn | read-write | current | This object is used to enable or disable echo canceler calibration function.. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.40.1.2 | ColumnradioEchoCancelerCableLenMin | read-write | current | Minimum cable len (Meter range 0 to 300) -. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.40.1.3 | ColumnradioEchoCancelerCableLenMax | read-write | current | Maximum cable len (Meter range 0 to 300) -. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.40.1.4 | ColumnradioEchoCancelerDelayLine1 | read-write | current | Echo canceler line 1 delay (retrieved by calibration function) -. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.40.1.5 | ColumnradioEchoCancelerDelayLine2 | read-write | current | Echo canceler line 2 delay (retrieved by calibration function) -. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.40.1.6 | ColumnradioEchoCancStatus | read-only | current | Current echo canceler calibration status. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.40.1.7 | ColumnradioEchoCancStart | read-write | current | Echo canceler calibration function trigger. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.50 | ScalarradioRemDemodulatorFailAlarmSeverityCode | read-write | current | Defines the severity associated to the radioRemDemodulatorFailAlarm and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.51 | ScalarradioRxActiveStatusTrapNotification | read-write | current | Enable/disables (statusTrapEnable or statusTrapDisable) the trap generation on status change event for radioRxActivestatus |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.52 | ScalarradioTxActiveStatusTrapNotification | read-write | current | Define the severity associated to the radioTxActivestatus and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.53 | ScalarradioCableOpenAlarmSeverityCode | read-write | current | Defines the severity associated to the radioCableOpen and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.54 | ScalarradioCableShortAlarmSeverityCode | read-write | current | Defines the severity associated to the radioCableShort and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.55 | ScalarradioInvalidFrequencyAlarmSeverityCode | read-write | current | Defines the severity associated to the radioInvalidFrequencyAlarm and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.56 | ScalarradioBaseBandRxAlarmSeverityCode | read-write | current | Defines the severity associated to the radioBaseBandRxAlarm and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.57 | ScalarradioModulatorFailAlarmSeverityCode | read-write | current | Defines the severity associated to the radioModulatorFailAlarm and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.58 | ScalarradioDemodulatorFailAlarmSeverityCode | read-write | current | Defines the severity associated to the radioDemodulatorFailAlarm and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.59 | ScalarradioRxPowerLowAlarmSeverityCode | read-write | current | Defines the severity associated to the radioRxPowerLowAlarm and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.60 | ScalarradioTxPowerLowAlarmSeverityCode | read-write | current | Defines the severity associated to the radioTxPowerLowAlarm and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.61 | ScalarradioVcoFailAlarmSeverityCode | read-write | current | Defines the severity associated to the radioVcoFailAlarm and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.62 | ScalarradioRxIFAgcAlarmSeverityCode | read-write | current | Defines the severity associated to the radioRxIFAgcAlarm and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.63 | ScalarradioTxIFAgcAlarmSeverityCode | read-write | current | Defines the severity associated to the radioTxIFAgcAlarm and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.64 | ScalarradioIduOduCommunicationAlarmSeverityCode | read-write | current | Define the severity associated to the radioIduOduCommunicationAlarm and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.65 | ScalarradioOduIduCommunicationAlarmSeverityCode | read-write | current | Define the severity associated to the radioOduIduCommunicationAlarm and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.66 | ScalarradioLocalOduAlarmSynthesisSeverityCode | read-write | current | Define the severity associated to the radioLocalOduAlarmSynthesis and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.67 | ScalarradioRemoteOduAlarmSynthesisSeverityCode | read-write | current | Define the severity associated to the radioRemoteOduAlarmSynthesis and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.68 | ScalarradioConfigMismatchAlarmSeverityCode | read-write | current | Defines the severity associated to the radioConfigMismatchAlarm and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.69 | ScalarradioPrxHysteresisValue | read-write | current | Defines the delta value associated to the radioPrx before having a new trap generation (radioPtxChange TRAP). The zero value is not allowed. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.70 | ScalarradioPtxHysteresisValue | read-write | current | Defines the delta value associated to the radioPtx before having a new trap generation (radioPtxChange TRAP). The zero value is not allowed. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.71 | ScalarradioPrxHysteresisValueTrapNotification | read-write | current | Enables/disables the Rx change trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.72 | ScalarradioPtxHysteresisValueTrapNotification | read-write | current | Enables/disables the Tx change trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.73 | ScalarradioRxQualityLowAlarmSeverityCode | read-write | current | Define the severity associated to the radioRxQualityLowAlarm and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.74 | ScalarradioRxQualityWarningAlarmSeverityCode | read-write | current | Define the severity associated to the radioRxQualityWarningAlarm and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.75 | ScalarlinkReducedCapacityAlarmSeverityCode | read-write | current | Define the severity associated to the linkReducedCapacityAlarm and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.76 | ScalarlinkLinkTelemetryFailAlarmSeverityCode | read-write | current | Define the severity associated to the linkLinkTelemetryFailAlarm and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.77 | ScalarlinkIdMismatchAlarmSeverityCode | read-write | current | Define the severity associated to the linkIdMismatchAlarm and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.78 | ScalarlinkRadioEocAlarmSeverityCode | read-write | current | Define the severity associated to the linkRadioEocAlarm and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.79 | ScalarlinkSetupMismatchAlarmSeverityCode | read-write | current | Define the severity associated to the linkSetupMismatchAlarm and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.80 | ScalarlinkRescueSetupAlarmSeverityCode | read-write | current | Define the severity associated to the linkRescueSetupAlarm and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.81 | ScalarlinkXpicProcedureBlockAlarmSeverityCode | read-write | current | Define the severity associated to the linkXpicProcedureBlockAlarm and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.82 | ScalarlinkXpicRemTxOffAlarmAlarmSeverityCode | read-write | current | Define the severity associated to the linkXpicRemTxOffAlarm and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.83 | ScalarlinkLocalIduAlarmSynthesis | read-only | current | Synthesis of the local IDU alarms |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.84 | ScalarlinkLocalIduAlarmSynthesisSeverityCode | read-write | current | Define the severity associated to the linkLocalIduAlarmSynthesis and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.85 | ScalarlinkRemoteIduAlarmSynthesisSeverityCode | read-write | current | Define the severity associated to the linkLocalIduAlarmSynthesis and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.86 | ScalarlinkTfcAlarmSeverityCode | read-write | current | Define the severity associated to the linkTfcV2Alarm (linkTfcAlarm) and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.87 | ScalarlinkBerSyncLossAlarmSeverityCode | read-write | current | Define the severity associated to the linkBerSyncLossAlarm and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.88 | ScalarlinkNotMatchingRadiosAlarmSeverityCode | read-write | current | Define the severity associated to the linkNotMatchingRadiosAlarm and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.89 | ScalarchannelSpacingSelection | read-write | current | his object selects which channel spacings the radio link has to support: - etsi: Compliant with European Telecommunication Standards Institute - fcc: Compliant… |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.90 | ScalarfadeMarginMeasure | read-write | current | Set by manager to start/stop fade margin measure. This item is linked to a manual operation (ManOpRecord) instance. |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.91 | ScalarlinkConfigurationInProgressTrapNotification | read-write | current | Enable/disables (statusTrapEnable or statusTrapDisable) the trap generation on status change event for linkConfigurationInProgress |
| 1.3.6.1.4.1.2544.1.11.7.3.5.1.1.5.92 | ScalarradioXpicAlarmSeverityCode | read-write | current | Define the severity associated to the radioXpicAlarm and enable/disable the trap generation on status change event. |
| 1.3.6.1.4.1.3373.1103.0.8001 | NotificationradioPrxChange | current | This event is generated when radioPrx is changed, in modulus, more than radioPtxHysteresisValue from last TRAP. The data passed with the event are: 1) equipIpS… | |
| 1.3.6.1.4.1.3373.1103.0.8002 | NotificationradioPtxChange | current | This event is generated when radioPtx is changed, in modulus, more than radioPtxHysteresisValue from last TRAP. The data passed with the event are: 1) equipIpS… |