SIAE-SYNC-MIB
73 objects
Timing Source Management.
Imported Objects
| IF-MIB | ifIndex InterfaceIndexOrZero |
| SIAE-ALARM-MIB | AlarmSeverityCode AlarmStatus |
| SIAE-TREE-MIB | siaeMib |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3373.1103.28 | Identitysync | clause | clause | Timing Source Management. |
| 1.3.6.1.4.1.3373.1103.28.1 | ScalarsyncMibVersion | read-only | current | Numerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.0… |
| 1.3.6.1.4.1.3373.1103.28.2 | TabletimingGeneratorTable | not-accessible | current | Table with TimingGenerator records. |
| 1.3.6.1.4.1.3373.1103.28.2.1 | RowtimingGeneratorRecord | not-accessible | current | TimingGenerator record. |
| 1.3.6.1.4.1.3373.1103.28.2.1.1 | ColumntimingGeneratorId | read-only | current | This object is used as Index of the Timing Generator Table. |
| 1.3.6.1.4.1.3373.1103.28.2.1.2 | ColumntimingGeneratorT4vsT0 | read-create | current | This object is used to set or reset the condition T4 equal T0. |
| 1.3.6.1.4.1.3373.1103.28.2.1.3 | ColumntimingGeneratorHoldOffTime | read-create | current | HoldOff time in milliseconds (300..1800). |
| 1.3.6.1.4.1.3373.1103.28.2.1.4 | ColumntimingGeneratorWtrTime | read-create | current | Wait Time to Restore in minutes (0..12). |
| 1.3.6.1.4.1.3373.1103.28.2.1.5 | ColumntimingGeneratorSinkLosSet | read-create | current | Wait time (seconds) before to set Los of reference signal. |
| 1.3.6.1.4.1.3373.1103.28.2.1.6 | ColumntimingGeneratorSinkLosReset | read-create | current | Wait time (seconds) before to reset Los of reference signal. |
| 1.3.6.1.4.1.3373.1103.28.2.1.7 | ColumntimingGeneratorT0SquelchAlarm | read-only | current | T0 squelch Alarm (Probable cause = xxx) with associated severity. |
| 1.3.6.1.4.1.3373.1103.28.2.1.8 | ColumntimingGeneratorT4SquelchAlarm | read-only | current | T4 squelch Alarm (Probable cause = xxx) with associated severity. |
| 1.3.6.1.4.1.3373.1103.28.2.1.9 | ColumntimingGeneratorFreeRunningStatus | read-only | current | Free running status (Probable cause = xxx) with associated severity. |
| 1.3.6.1.4.1.3373.1103.28.2.1.10 | ColumntimingGeneratorHoldoverStatus | read-only | current | Holdover status (Probable cause = xxx) with associated severity. |
| 1.3.6.1.4.1.3373.1103.28.2.1.11 | ColumntimingGeneratorActiveStatus | read-only | current | Active status (Probable cause = xxx) with associated severity. |
| 1.3.6.1.4.1.3373.1103.28.2.1.12 | ColumntimingGeneratorT0CurrentQuality | read-only | current | Current quality on T0. |
| 1.3.6.1.4.1.3373.1103.28.2.1.13 | ColumntimingGeneratorT4CurrentQuality | read-only | current | Current quality on T4. |
| 1.3.6.1.4.1.3373.1103.28.2.1.14 | ColumntimingGeneratorT4MinimumQuality | read-create | current | If the Quality Level of the signal used to derive T4 falls below timingGeneratorT4MinimumQuality then the output will be squelched. The value ql-DNU inhibits T… |
| 1.3.6.1.4.1.3373.1103.28.2.1.15 | ColumntimingGeneratorT0PreferredSource | read-create | current | Object identifier of the leaf timingSinkGenId of the timingSink instance selected as preferential clock source of T0. If no preferential timing sink is selecte… |
| 1.3.6.1.4.1.3373.1103.28.2.1.16 | ColumntimingGeneratorT4PreferredSource | read-create | current | Object identifier of the leaf timingSinkGenId of the timingSink instance selected as preferential clock source of T4. If no preferential timing sink is selecte… |
| 1.3.6.1.4.1.3373.1103.28.2.1.17 | ColumntimingGeneratorRowStatus | read-create | current | Status of this row of timingGeneratorTable. |
| 1.3.6.1.4.1.3373.1103.28.3 | TabletimingGeneratorMaintTable | not-accessible | current | Table with TimingGenerator records. |
| 1.3.6.1.4.1.3373.1103.28.3.1 | RowtimingGeneratorMaintRecord | not-accessible | current | TimingGenerator record. |
| 1.3.6.1.4.1.3373.1103.28.3.1.1 | ColumntimingGeneratorT4Squelch | read-write | current | This object is used to enable/disable T4 squelch. |
| 1.3.6.1.4.1.3373.1103.28.3.1.2 | ColumntimingGeneratorStatusControl | read-write | current | Clock generator operating mode control. This item is linked to a manual operation (ManOpRecord) instance. |
| 1.3.6.1.4.1.3373.1103.28.3.1.3 | ColumntimingGeneratorT0ForcedSource | read-write | current | Object identifier of the leaf timingSinkGenId of the timingSink instance selected as forced clock source of T0. If no forced timing sink is selected, the value… |
| 1.3.6.1.4.1.3373.1103.28.3.1.4 | ColumntimingGeneratorT4ForcedSource | read-write | current | Object identifier of the leaf timingSinkGenId of the timingSink instance selected as forced clock source of T4. If no forced timing sink is selected, the value… |
| 1.3.6.1.4.1.3373.1103.28.3.1.5 | ColumntimingGeneratorWtrClearSource | read-write | current | Object identifier of the leaf timingSinkGenId of the timingSink instance selected to clear WTR time. On read, this object return alvays an OBJECT IDENTIFIER {0… |
| 1.3.6.1.4.1.3373.1103.28.4 | TabletimingSinkTable | not-accessible | current | Table with TimingSink records. |
| 1.3.6.1.4.1.3373.1103.28.4.1 | RowtimingSinkRecord | not-accessible | current | TimingSink record. |
| 1.3.6.1.4.1.3373.1103.28.4.1.1 | ColumntimingSinkGenId | read-only | current | This object is used as Index of the timingGeneratorTable and defines in union with timingSinkType and timingSinkId the reference signal. |
| 1.3.6.1.4.1.3373.1103.28.4.1.2 | ColumntimingSinkId | read-only | current | This object is used as Index of the timingSinkTable and defines in union with timingSinkType and timingSinkGenId the reference signal. |
| 1.3.6.1.4.1.3373.1103.28.4.1.3 | ColumntimingSinkType | read-only | current | This object is used as Index of the timingSinkTable and defines if the reference signal is used to generate T0 or T4 system clock. |
| 1.3.6.1.4.1.3373.1103.28.4.1.4 | ColumntimingSinkIfIndex | read-only | current | The ifIndex value the agent selected for this timingSink interface. |
| 1.3.6.1.4.1.3373.1103.28.4.1.5 | ColumntimingSinkSelector | read-create | current | This object is used to select one of the possible clock source connected to this timingSink. Valid values are listed in timingSinkSelectorTable: only values of… |
| 1.3.6.1.4.1.3373.1103.28.4.1.6 | ColumntimingSinkPriority | read-create | current | This object is used to set the priority of the reference signal (p1 is the highest priority). |
| 1.3.6.1.4.1.3373.1103.28.4.1.7 | ColumntimingSinkLabel | read-only | current | ASCII string used to describe the reference signal when a trap is sent. |
| 1.3.6.1.4.1.3373.1103.28.4.1.8 | ColumntimingSinkLosAlarm | read-only | current | Loss of reference signal (Probable cause = xxx) alarm with associated severity. |
| 1.3.6.1.4.1.3373.1103.28.4.1.9 | ColumntimingSinkDriftAlarm | read-only | current | Drift of reference signal (Probable cause = xxx) alarm with associated severity. |
| 1.3.6.1.4.1.3373.1103.28.4.1.10 | ColumntimingSinkActiveStatus | read-only | current | Active status (Probable cause = xxx) status for the reference signal. |
| 1.3.6.1.4.1.3373.1103.28.4.1.11 | ColumntimingSinkCurrentQuality | read-only | current | Current quality on sink instance. |
| 1.3.6.1.4.1.3373.1103.28.4.1.12 | ColumntimingSinkOverwriteTxQuality | read-create | current | Forcing of Tx quality parameter. |
| 1.3.6.1.4.1.3373.1103.28.4.1.13 | ColumntimingSinkOverwriteRxQuality | read-create | current | Forcing of Rx quality parameter. |
| 1.3.6.1.4.1.3373.1103.28.4.1.14 | ColumntimingSinkSentQuality | read-only | current | Quality level written in the S1 byte of the outgoing STM-n. |
| 1.3.6.1.4.1.3373.1103.28.4.1.15 | ColumntimingSinkE1Sabit | read-create | current | Specifies the San synchronization status bit used to indicate the clock quality level. Meaningful when the Sink source is an E1 |
| 1.3.6.1.4.1.3373.1103.28.4.1.16 | ColumntimingSinkEthPortRole | read-create | deprecated | This item configures how to handle the role of a 1000BASE-T port when it is used as a source of timing: choosing 'static', the role is set according ethLanPhyT… |
| 1.3.6.1.4.1.3373.1103.28.4.1.17 | ColumntimingSinkRowStatus | read-create | current | Status of this row of timingSinkTable |
| 1.3.6.1.4.1.3373.1103.28.5 | ScalartimingGeneratorManualSwitch | read-write | current | timingGeneratorId of the forced timingGenerator instance. If no preferred timing generator is selected, the value should be set to 0. |
| 1.3.6.1.4.1.3373.1103.28.6 | ScalartimingGeneratorForcedSwitch | read-write | current | timingGeneratorId of the forced timingGenerator instance. If no forced timing generator is selected, the value should be set to 0. |
| 1.3.6.1.4.1.3373.1103.28.7 | ScalartimingGeneratorT0SquelchAlarmSeverityCode | read-write | current | Defines the severity associated to the TimingGeneratorT0SquelchAlarm and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.3373.1103.28.8 | ScalartimingGeneratorT4SquelchAlarmSeverityCode | read-write | current | Defines the severity associated to the timingGeneratorT4SquelchAlarm and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.3373.1103.28.9 | ScalartimingGeneratorFreeRunningStatusSeverityCode | read-write | current | Defines the severity associated to the timingGeneratorFreeRunningStatus and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.3373.1103.28.10 | ScalartimingGeneratorHoldoverStatusSeverityCode | read-write | current | Defines the severity associated to the timingGeneratorHoldoverStatus and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.3373.1103.28.11 | ScalartimingGeneratorActiveStatusSeverityCode | read-write | current | Defines the severity associated to the timingGeneratorActiveStatus and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.3373.1103.28.12 | ScalartimingGeneratorQualityEnable | read-write | current | Quality policy enable |
| 1.3.6.1.4.1.3373.1103.28.13 | ScalartimingSinkLosAlarmSeverityCode | read-write | current | Defines the severity associated to the TimingSinkLosAlarm and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.3373.1103.28.14 | ScalartimingSinkDriftAlarmSeverityCode | read-write | current | Defines the severity associated to the TimingSinkDriftAlarm and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.3373.1103.28.15 | ScalartimingSinkActiveStatusSeverityCode | read-write | current | Defines the severity associated to the timingSinkActiveStatus and enables/disables the trap generation on status change event. |
| 1.3.6.1.4.1.3373.1103.28.16 | TabletimingSinkSelectorTable | not-accessible | current | Table with TimingSinkSelector records. |
| 1.3.6.1.4.1.3373.1103.28.16.1 | RowtimingSinkSelectorRecord | not-accessible | current | TimingSinkSelector entry. Several instances of this entry can be create for each instance of timingSinkTable. Each entry represents a possible source selected … |
| 1.3.6.1.4.1.3373.1103.28.16.1.1 | ColumntimingSinkSelectorId | read-only | current | This object is used as Index of the timingSinkSelectorTable and defines in union with timingSinkGenId, timingSinkType and timingSinkId the selected source by a… |
| 1.3.6.1.4.1.3373.1103.28.16.1.2 | ColumntimingSinkSelectorLabel | read-only | current | ASCII string used to describe the selectable timing source. |
| 1.3.6.1.4.1.3373.1103.28.17 | TableesmcTable | not-accessible | current | Table with TimingSinkSelector records. |
| 1.3.6.1.4.1.3373.1103.28.17.1 | RowesmcRecord | not-accessible | current | esmcTable entry. Every entries describes an ESMC channel of a TE interface. |
| 1.3.6.1.4.1.3373.1103.28.17.1.1 | ColumnesmcSsmEnable | read-create | current | This object enables SSM messaging on this ifIndex. |
| 1.3.6.1.4.1.3373.1103.28.17.1.2 | ColumnesmcQlRx | read-only | current | This object show quality received on ESMC-PDU this interface. |
| 1.3.6.1.4.1.3373.1103.28.17.1.3 | ColumnesmcQlTx | read-only | current | This object show quality transmitted in ESMC-PDU on this interface. |
| 1.3.6.1.4.1.3373.1103.28.17.1.4 | ColumnesmcPktsRx | read-only | current | This object contains the total number of received ESMC-PDU packets on this interface. |
| 1.3.6.1.4.1.3373.1103.28.17.1.5 | ColumnesmcPktsTx | read-only | current | This object contains the total number of transmitted ESMC-PDU packets on this interface. |
| 1.3.6.1.4.1.3373.1103.28.17.1.6 | ColumnesmcPktsRxDropped | read-only | current | This object contains the total number of dropped ESMC-PDU packets on this interface. |
| 1.3.6.1.4.1.3373.1103.28.17.1.7 | ColumnesmcPktsRxErrored | read-only | current | This object contains the total number of dropped ESMC-PDU packets whose processing(decoding) resulted into error. |
| 1.3.6.1.4.1.3373.1103.28.17.1.8 | Columnesmc1000BaseTRole | read-create | current | This object allows to input the clock generator role of a 1000BaseT interface. This objects is applicable when the quality management is disabled (timingGenera… |
| 1.3.6.1.4.1.3373.1103.28.17.1.9 | ColumnesmcRowStatus | read-create | current | Status of this row of esmcTable. |