SIM-MIB
276 objects
The MIB module for defining DVB Simulcrypt Conditional Access System configuration information.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | BITS Counter32 enterprises IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2696.1.1 | IdentitysimMIB | The MIB module for defining DVB Simulcrypt Conditional Access System configuration information. | ||
| 1.3.6.1.4.1.2696.1.1.1 | NodesimMIBObjects | |||
| 1.3.6.1.4.1.2696.1.1.1.1 | NodesimIdent | |||
| 1.3.6.1.4.1.2696.1.1.1.1.1 | ScalarsimSofwareVersion | read-only | current | This contains a display string that defines the current version of the software for this unit. |
| 1.3.6.1.4.1.2696.1.1.1.1.2 | ScalarsimMIBVersion | read-only | current | This contains a display string that defines the current version of the MIB. |
| 1.3.6.1.4.1.2696.1.1.1.1.3 | ScalarsimMIBPrivateVersion | read-only | current | This contains a display string that defines the current private version of the MIB. |
| 1.3.6.1.4.1.2696.1.1.1.1.4 | ScalarsimAgentVersion | read-only | current | This contains a display string that defines the current version of the agent. |
| 1.3.6.1.4.1.2696.1.1.1.2 | NodesimECMG | |||
| 1.3.6.1.4.1.2696.1.1.1.2.1 | TablesimEcmgTable | not-accessible | current | This table specifies the IP addresses and Port numbers of ECM Generators to be used by headend managers to configure SCSs. This table is to be used in ECM Gene… |
| 1.3.6.1.4.1.2696.1.1.1.2.1.1 | RowsimEcmgEntry | not-accessible | current | Information about a single table entry. Depending on whether this is an ECMG agent or ECMG proxy agent different table entries can be omitted. |
| 1.3.6.1.4.1.2696.1.1.1.2.1.1.1 | ColumnsimEcmgIndex | read-only | current | The ECM Generator Table unique index. |
| 1.3.6.1.4.1.2696.1.1.1.2.1.1.2 | ColumnsimEcmgIpAddress | read-only | current | IP address of the host of the ECMG. |
| 1.3.6.1.4.1.2696.1.1.1.2.1.1.3 | ColumnsimEcmgTcpPort | read-only | current | TCP port of the ECMG. |
| 1.3.6.1.4.1.2696.1.1.1.2.1.1.4 | ColumnsimEcmgSuCasId | read-only | current | The Super_VAS_ID is formed by concatenation of the CA_system_id (16 bit) and the CA_subsystem_ID (16 bit). It defines uniquely a set of ECMGs for a given SCS. |
| 1.3.6.1.4.1.2696.1.1.1.2.1.1.5 | ColumnsimEcmgChannels | read-only | current | The total number of channels this ECMG is currently maintaining. |
| 1.3.6.1.4.1.2696.1.1.1.2.1.1.6 | ColumnsimEcmgCwPrs | read-only | current | The total number of CW provisioning requests received by this ECMG. |
| 1.3.6.1.4.1.2696.1.1.1.2.1.1.7 | ColumnsimEcmgErrs | read-only | current | The total number of communications errors for this ECMG. |
| 1.3.6.1.4.1.2696.1.1.1.2.1.1.8 | ColumnsimEcmgTargetCpsig | read-only | current | The index into the C(P)SIG table identifying the C(P)SIG associated with this ECMG. |
| 1.3.6.1.4.1.2696.1.1.1.2.1.1.9 | ColumnsimEcmgCaMib | read-only | current | The pointer to a provider proprietary MIB (like ifSpecific in the interfaces group of MIB II. |
| 1.3.6.1.4.1.2696.1.1.1.2.2 | TablesimEcmgCTable | not-accessible | current | This table specifies information relating to ECMG/SCS channels including the IP addresses and Port numbers of SCSs communicating with the ECMG Generators. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1 | RowsimEcmgCEntry | not-accessible | current | Information about a single table entry. Depending on whether this is an ECMG agent or ECMG proxy agent different table entries can be omitted. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.1 | ColumnsimEcmgChannelId | read-only | current | The ECMG/SCS Channel identifier. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.2 | ColumnsimEcmgCScsIpAddress | read-only | current | IP address of the SCS. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.3 | ColumnsimEcmgCScsTcpPort | read-only | current | TCP port of the SCS. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.4 | ColumnsimEcmgCStreams | read-only | current | The total number of streams this ECMG is currently maintaining on this channel. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.5 | ColumnsimEcmgCCwPrs | read-only | current | The total number of CW provisioning requests received by this ECMG on this channel. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.6 | ColumnsimEcmgCErrs | read-only | current | The total number of communications errors for this ECMG on this channel. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.7 | ColumnsimEcmgCSuCasId | read-only | current | The SuperCASId of the current Channel. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.8 | ColumnsimEcmgFormat | read-only | current | Format of datagrams : section or TS Packet. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.9 | ColumnsimACDelayStart | read-only | current | Value of AC_Delay_Start parameter in ECMG protocol, imposed by CAS. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.10 | ColumnsimACDelayStop | read-only | current | Value of AC_Delay_Stop parameter in ECMG protocol, imposed by CAS. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.11 | ColumnsimDelayStart | read-only | current | Value of Delay_Start parameter in ECMG protocol, imposed by CAS. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.12 | ColumnsimDelayStop | read-only | current | Value of Delay_Stop parameter in ECMG protocol, imposed by CAS. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.13 | ColumnsimTransitionDelayStart | read-only | current | Value of Transition_Delay_Start parameter in ECMG protocol, imposed by CAS. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.14 | ColumnsimTransitionDelayStop | read-only | current | Value of Transition_Delay_Stop parameter in ECMG protocol, imposed by CAS. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.15 | ColumnsimECMRepPeriod | read-only | current | Repeating period of ECM defined by CAS and applied by SCS. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.16 | ColumnsimMaxStreams | read-only | current | Max number of streams supported by the ECMG. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.17 | ColumnsimMinCPDuration | read-only | current | Min crypto-period length supported by the ECMG. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.18 | ColumnsimLeadCW | read-only | current | Number of CW the ecmg needs in advance. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.19 | ColumnsimCWPerMsg | read-only | current | Number of CW the ecmg needs in each ECM request. |
| 1.3.6.1.4.1.2696.1.1.1.2.2.1.20 | ColumnsimMaxCompTime | read-only | current | Max delay supported by the ECMG for providing an ECM. |
| 1.3.6.1.4.1.2696.1.1.1.2.3 | TablesimEcmgSTable | not-accessible | current | This table specifies information relating to ECMG/SCS streams. |
| 1.3.6.1.4.1.2696.1.1.1.2.3.1 | RowsimEcmgSEntry | not-accessible | current | Information about a single table entry. Depending on whether this is an ECMG agent or ECMG proxy agent different table entries can be omitted. |
| 1.3.6.1.4.1.2696.1.1.1.2.3.1.1 | ColumnsimEcmgStreamId | read-only | current | The ECMG/SCS Stream identifier. |
| 1.3.6.1.4.1.2696.1.1.1.2.3.1.2 | ColumnsimEcmgEcmId | read-only | current | The unique ECM flow identifier. |
| 1.3.6.1.4.1.2696.1.1.1.2.3.1.3 | ColumnsimEcmgSLastCp | read-only | current | The number of the crypto-period last processed on this stream. |
| 1.3.6.1.4.1.2696.1.1.1.2.3.1.4 | ColumnsimEcmgSCwPrs | read-only | current | The total number of CW provisioning requests received by this ECMG on this stream. |
| 1.3.6.1.4.1.2696.1.1.1.2.3.1.5 | ColumnsimEcmgSErrs | read-only | current | The total number of communications errors for this ECMG on this stream. |
| 1.3.6.1.4.1.2696.1.1.1.3 | NodesimEMMG | |||
| 1.3.6.1.4.1.2696.1.1.1.3.1 | TablesimEmOrPdTable | not-accessible | current | This table defines the EMMG or PDG interfaces to the MUX and is to be used in EMMGs/PDGs and optionally the multiplexer. |
| 1.3.6.1.4.1.2696.1.1.1.3.1.1 | RowsimEmOrPdEntry | not-accessible | current | Information about a single table entry. Depending on whether this is an EMMG/PDG or multiplexer agent different table entries can be omitted. |
| 1.3.6.1.4.1.2696.1.1.1.3.1.1.1 | ColumnsimEmOrPdIndex | read-only | current | Unique index into the EMMG or PDG table. |
| 1.3.6.1.4.1.2696.1.1.1.3.1.1.2 | ColumnsimEmOrPdDataType | read-only | current | Data_type: Type of data handled by this EMMG/PDG. |
| 1.3.6.1.4.1.2696.1.1.1.3.1.1.3 | ColumnsimEmOrPdClientId | read-only | current | Client_ID: The Client_ID is a 32-bit identifier. It shall identify uniquely an EMMG/PDG across all the EMMGs/PDGs connected to a given MUX. To facilitate uniqu… |
| 1.3.6.1.4.1.2696.1.1.1.3.1.1.4 | ColumnsimEmOrPdCommCapability | read-only | current | Communication capability between EMMG/PDG and the multiplexer. Currently TCP or UDP or both. |
| 1.3.6.1.4.1.2696.1.1.1.3.1.1.5 | ColumnsimEmOrPdErrs | read-only | current | The total number of communications errors for this EMMG/PDG. |
| 1.3.6.1.4.1.2696.1.1.1.3.1.1.6 | ColumnsimEmOrPdTargetCpsig | read-create | current | The index into the C(P)SIG table identifying the C(P)SIG associated with this EMMG/PDG. |
| 1.3.6.1.4.1.2696.1.1.1.3.1.1.7 | ColumnsimEmOrPdCaMib | read-create | current | Pointer to a vendor proprietary extension to the EMMG/PDG MIB group. |
| 1.3.6.1.4.1.2696.1.1.1.3.2 | TablesimEmOrPdLapTable | not-accessible | current | This table is used for configuration of EMM/PD Generators. |
| 1.3.6.1.4.1.2696.1.1.1.3.2.1 | RowsimEmOrPdLapEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.2696.1.1.1.3.2.1.1 | ColumnsimEmOrPdLapIndex | read-only | current | Unique Logical Access Point (LAP) identifier. |
| 1.3.6.1.4.1.2696.1.1.1.3.2.1.2 | ColumnsimEmOrPdLapAdminState | read-create | current | Used by an authorized manager to lock a conceptual row for exclusive write and create access. |
| 1.3.6.1.4.1.2696.1.1.1.3.2.1.3 | ColumnsimEmOrPdLapCommType | read-create | current | Type of communication between EMMG/PDG and the multiplexer. Currently TCP or UDP. |
| 1.3.6.1.4.1.2696.1.1.1.3.2.1.4 | ColumnsimEmOrPdLapMuxIpAddress | read-create | current | IP address of the multiplexer for EMMG/PDG TCP communication. |
| 1.3.6.1.4.1.2696.1.1.1.3.2.1.5 | ColumnsimEmOrPdLapMuxPort | read-create | current | Port number (TCP) of the multiplexer for EMMG/PDG TCP communication. |
| 1.3.6.1.4.1.2696.1.1.1.3.2.1.6 | ColumnsimEmOrPdLapStatus | read-create | current | Used for table row creation management. |
| 1.3.6.1.4.1.2696.1.1.1.3.2.1.7 | ColumnsimEmOrPdLapMuxUIpAddress | read-create | current | IP address of the multiplexer for EMMG/PDG UDP communication. |
| 1.3.6.1.4.1.2696.1.1.1.3.2.1.8 | ColumnsimEmOrPdLapMuxUPort | read-create | current | Port number (UDP) of the multiplexer for EMMG/PDG UDP communication. |
| 1.3.6.1.4.1.2696.1.1.1.3.3 | TablesimEmOrPdLapGTable | not-accessible | current | This table is used for configuration of EMM/PD Generators. |
| 1.3.6.1.4.1.2696.1.1.1.3.3.1 | RowsimEmOrPdLapGEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.2696.1.1.1.3.3.1.1 | ColumnsimEmOrPdLapGroup | read-only | current | Logical Access Point (LAP) group. |
| 1.3.6.1.4.1.2696.1.1.1.3.3.1.2 | ColumnsimEmOrPdLapGAdminState | read-create | current | Used by an authorized manager to lock a conceptual row for exclusive write and create access. |
| 1.3.6.1.4.1.2696.1.1.1.3.3.1.3 | ColumnsimEmOrPdLapGStatus | read-create | current | Used for table row creation management. |
| 1.3.6.1.4.1.2696.1.1.1.3.4 | TablesimEmOrPdCTable | not-accessible | current | This table is used for monitoring of channels between Muxes and EMMGs/PDGs. |
| 1.3.6.1.4.1.2696.1.1.1.3.4.1 | RowsimEmOrPdCEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.2696.1.1.1.3.4.1.1 | ColumnsimEmOrPdChannelId | read-only | current | Data_channel_ID: This identifier uniquely identifies a EMM/Private Data channel within a client_ID. |
| 1.3.6.1.4.1.2696.1.1.1.3.4.1.2 | ColumnsimEmOrPdCommType | read-create | current | Communications type: TCP or UDP. |
| 1.3.6.1.4.1.2696.1.1.1.3.4.1.3 | ColumnsimEmOrPdCIpAddress | read-only | current | IP address of the host of the EMMG or PDG. |
| 1.3.6.1.4.1.2696.1.1.1.3.4.1.4 | ColumnsimEmOrPdCPort | read-only | current | Port number *TCP or UDP of the EMMG or PDG. |
| 1.3.6.1.4.1.2696.1.1.1.3.4.1.5 | ColumnsimEmOrPdCErrs | read-only | current | The total number of communications errors on this channel. |
| 1.3.6.1.4.1.2696.1.1.1.3.4.1.6 | ColumnsimEmOrPdCFormat | read-only | current | Format of datagrams : section or TS Packet. |
| 1.3.6.1.4.1.2696.1.1.1.3.4.1.7 | ColumnsimEmOrPdCUIpAddress | read-only | current | IP address of the host of the EMMG or PDG for UDP. |
| 1.3.6.1.4.1.2696.1.1.1.3.4.1.8 | ColumnsimEmOrPdCUPort | read-only | current | Port number (UDP) of the EMMG or PDG. |
| 1.3.6.1.4.1.2696.1.1.1.3.5 | TablesimEmOrPdSTable | not-accessible | current | This table is used for monitoring of streams between Muxes and EMMGs/PDGs. |
| 1.3.6.1.4.1.2696.1.1.1.3.5.1 | RowsimEmOrPdSEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.2696.1.1.1.3.5.1.1 | ColumnsimEmOrPdDataId | read-create | current | DataID: This identifier uniquely identifies a EMM/Private Data stream. |
| 1.3.6.1.4.1.2696.1.1.1.3.5.1.2 | ColumnsimEmOrPdSChannelId | read-create | current | Channel identifier. |
| 1.3.6.1.4.1.2696.1.1.1.3.5.1.3 | ColumnsimEmOrPdBwidth | read-create | current | Negotiated Bandwidth. |
| 1.3.6.1.4.1.2696.1.1.1.3.5.1.4 | ColumnsimEmOrPdStreamId | read-only | current | Data_stream_ID: This identifier uniquely identifies a EMM/Private Data stream within a channel. |
| 1.3.6.1.4.1.2696.1.1.1.3.5.1.5 | ColumnsimEmOrPdSErrs | read-only | current | The total number of communications errors on this stream. |
| 1.3.6.1.4.1.2696.1.1.1.3.5.1.6 | ColumnsimEmOrPdSBytes | read-only | current | The total number of bytes sent by this EMMG/PDG on this stream. |
| 1.3.6.1.4.1.2696.1.1.1.3.5.1.7 | ColumnsimEmOrPdSReqBwidth | read-create | current | Bandwidth as requested by CAS. |
| 1.3.6.1.4.1.2696.1.1.1.4 | NodesimCPSI | |||
| 1.3.6.1.4.1.2696.1.1.1.4.1 | TablesimCpsigTable | not-accessible | current | This table defines the C(P)SIG) interfaces to the Mux and is to be used in the C(P)SIG and optionally the multiplexer. |
| 1.3.6.1.4.1.2696.1.1.1.4.1.1 | RowsimCpsigEntry | not-accessible | current | Information about a single table entry. Depending on whether this is an EMMG/PDG or multiplexer agent different table entries can be omitted. |
| 1.3.6.1.4.1.2696.1.1.1.4.1.1.1 | ColumnsimCpsigIndex | read-only | current | Unique index into the Cpsig table. |
| 1.3.6.1.4.1.2696.1.1.1.4.1.1.2 | ColumnsimCpsigSuperCasId | read-only | current | super_CAS_id |
| 1.3.6.1.4.1.2696.1.1.1.4.1.1.3 | ColumnsimCpsigErrs | read-only | current | The total number of communication errors for this C(P)SIG). |
| 1.3.6.1.4.1.2696.1.1.1.4.1.1.4 | ColumnsimCpsigChannels | read-only | current | The total number of channels for this C(P)SIG). |
| 1.3.6.1.4.1.2696.1.1.1.4.1.1.5 | ColumnsimCpsigCpsigIpAddress | read-only | current | The IP Address of the C(P)SIG). |
| 1.3.6.1.4.1.2696.1.1.1.4.1.1.6 | ColumnsimCpsigCpsigPort | read-only | current | The TCP port number of the C(P)SIG). |
| 1.3.6.1.4.1.2696.1.1.1.4.1.1.7 | ColumnsimCpsigCaMib | read-only | current | Pointer to a vendor proprietary extension to the C(P)SIG) MIB group. |
| 1.3.6.1.4.1.2696.1.1.1.4.2 | TablesimCpsigCTable | not-accessible | current | This table is used for monitoring of channels between (P)SIGs and C(P)SIGs. |
| 1.3.6.1.4.1.2696.1.1.1.4.2.1 | RowsimCpsigCEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.2696.1.1.1.4.2.1.1 | ColumnsimCpsigChannelId | read-only | current | ChannelId identifies the C(P)SIG channel. |
| 1.3.6.1.4.1.2696.1.1.1.4.2.1.2 | ColumnsimCpsigPsigIpAddress | read-only | current | IP address of the host of the (P)SIG. |
| 1.3.6.1.4.1.2696.1.1.1.4.2.1.3 | ColumnsimCpsigPsigPort | read-only | current | TCP Port number of the (P)SIG. |
| 1.3.6.1.4.1.2696.1.1.1.4.2.1.4 | ColumnsimCpsigCErrs | read-only | current | The total number of communication errors on this channel. |
| 1.3.6.1.4.1.2696.1.1.1.4.2.1.5 | ColumnsimCpsigCTstrms | read-only | current | The total number of transport streams on this channel. |
| 1.3.6.1.4.1.2696.1.1.1.4.2.1.6 | ColumnsimCpsigCSstrms | read-only | current | The total number of service streams on this channel. |
| 1.3.6.1.4.1.2696.1.1.1.4.3 | TablesimCpsigStreamTable | not-accessible | current | This table is used for monitoring of streams between Muxes and C(P)SIG)s. |
| 1.3.6.1.4.1.2696.1.1.1.4.3.1 | RowsimCpsigStreamEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.2696.1.1.1.4.3.1.1 | ColumnsimCpsigStreamId | not-accessible | current | This identifier uniquely identifies a C(P)SIG) stream |
| 1.3.6.1.4.1.2696.1.1.1.4.3.1.2 | ColumnsimCpsigStreamTStreamId | read-only | current | This identifier uniquely identifies a C(P)SIG transport stream |
| 1.3.6.1.4.1.2696.1.1.1.4.3.1.3 | ColumnsimCpsigStreamNid | read-only | current | This identifier uniquely identifies the network id associated with the stream |
| 1.3.6.1.4.1.2696.1.1.1.4.3.1.4 | ColumnsimCpsigStreamOnid | read-only | current | This identifier uniquely identifies the original network id associated with the stream |
| 1.3.6.1.4.1.2696.1.1.1.4.3.1.5 | ColumnsimCpsigStreamMaxCompTime | read-only | current | Max Computation time by the C(P)SIG. |
| 1.3.6.1.4.1.2696.1.1.1.4.3.1.6 | ColumnsimCpsigStreamTriggerEnable | read-only | current | Triggers enabled by the C(P)SIG. |
| 1.3.6.1.4.1.2696.1.1.1.4.3.1.7 | ColumnsimCpsigStreamLastTrigger | read-only | current | Last trigger processed by the C(P)SIG. |
| 1.3.6.1.4.1.2696.1.1.1.4.3.1.8 | ColumnsimCpsigStreamLastEventId | read-only | current | Last event id processed by the C(P)SIG. |
| 1.3.6.1.4.1.2696.1.1.1.4.3.1.9 | ColumnsimCpsigStreamLastServiceId | read-only | current | Last service id processed by the C(P)SIG. |
| 1.3.6.1.4.1.2696.1.1.1.4.3.1.10 | ColumnsimCpsigStreamLastEsId | read-only | current | Last elementary stream id processed by the C(P)SIG. |
| 1.3.6.1.4.1.2696.1.1.1.4.3.1.11 | ColumnsimCpsigStreamLastEcmPid | read-only | current | Last ECM pid processed by the C(P)SIG. |
| 1.3.6.1.4.1.2696.1.1.1.4.3.1.12 | ColumnsimCpsigStreamErrs | read-only | current | The total number of communication errors on this stream. |
| 1.3.6.1.4.1.2696.1.1.1.4.3.1.13 | ColumnsimCpsigStreamBytes | read-only | current | The total number of bytes sent by this EMMG/PDG on this stream. |
| 1.3.6.1.4.1.2696.1.1.1.5 | NodesimPSI | |||
| 1.3.6.1.4.1.2696.1.1.1.5.1 | TablesimPsigTable | not-accessible | current | This table advertises the (P)SIG configuration information. |
| 1.3.6.1.4.1.2696.1.1.1.5.1.1 | RowsimPsigEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.2696.1.1.1.5.1.1.1 | ColumnsimPsigIndex | read-only | current | The unique index into the table. |
| 1.3.6.1.4.1.2696.1.1.1.5.1.1.2 | ColumnsimPsigType | read-only | current | Psig type |
| 1.3.6.1.4.1.2696.1.1.1.5.1.1.3 | ColumnsimPsigTriggerSupport | read-only | current | Identifies which trigger types the PSIG supports. |
| 1.3.6.1.4.1.2696.1.1.1.5.1.1.4 | ColumnsimPsigNetworkId | read-only | current | Network identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.1.1.5 | ColumnsimPsigONetworkId | read-only | current | Original Network identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.1.1.6 | ColumnsimPsigTransStreamId | read-only | current | Transport Stream identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.1.1.7 | ColumnsimPsigTSServices | read-only | current | List of service identifies on the transport stream. |
| 1.3.6.1.4.1.2696.1.1.1.5.2 | TablesimPsigConfigTable | not-accessible | current | This table configures the (P)SIG/(C)PSIG communication. |
| 1.3.6.1.4.1.2696.1.1.1.5.2.1 | RowsimPsigConfigEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.2696.1.1.1.5.2.1.1 | ColumnsimPsigConfigIndex | not-accessible | current | The unique index into the table. |
| 1.3.6.1.4.1.2696.1.1.1.5.2.1.2 | ColumnsimPsigConfigAdminState | read-create | current | Used by an authorized manager to lock a conceptual row for exclusive write and create access. |
| 1.3.6.1.4.1.2696.1.1.1.5.2.1.3 | ColumnsimPsigConfigCpsigType | read-create | current | C(P)SIG type. |
| 1.3.6.1.4.1.2696.1.1.1.5.2.1.4 | ColumnsimPsigConfigCustCasId | read-create | current | Custom CAS Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.2.1.5 | ColumnsimPsigConfigMaxCompTime | read-create | current | Maximum Computing Time. |
| 1.3.6.1.4.1.2696.1.1.1.5.2.1.6 | ColumnsimPsigConfigServiceId | read-create | current | Service identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.2.1.7 | ColumnsimPsigConfigTriggerEnable | read-create | current | Trigger types enabled. |
| 1.3.6.1.4.1.2696.1.1.1.5.2.1.8 | ColumnsimPsigConfigCADInsMode | read-create | current | Conditional Access Descriptor Insert mode. |
| 1.3.6.1.4.1.2696.1.1.1.5.2.1.9 | ColumnsimPsigConfigEntryStatus | read-create | current | Used for table row creation management. |
| 1.3.6.1.4.1.2696.1.1.1.5.3 | TablesimPsigEcmTrTable | not-accessible | current | This table contains all the active ECM Triggers. |
| 1.3.6.1.4.1.2696.1.1.1.5.3.1 | RowsimPsigEcmTrEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.2696.1.1.1.5.3.1.1 | ColumnsimPsigEcmTrIndex | not-accessible | current | The trigger index. |
| 1.3.6.1.4.1.2696.1.1.1.5.3.1.2 | ColumnsimPsigEcmTrNetworkId | read-create | current | The Network Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.3.1.3 | ColumnsimPsigEcmTrONetworkId | read-create | current | The Original Network Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.3.1.4 | ColumnsimPsigEcmTrTransStreamId | read-create | current | Transport Stream Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.3.1.5 | ColumnsimPsigEcmTrServiceId | read-create | current | Service Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.3.1.6 | ColumnsimPsigEcmTrEsId | read-create | current | Elementary Stream Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.3.1.7 | ColumnsimPsigEcmTrType | read-create | current | ECM Trigger Type. |
| 1.3.6.1.4.1.2696.1.1.1.5.3.1.8 | ColumnsimPsigEcmTrSuCasId | read-create | current | ECM Client Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.3.1.9 | ColumnsimPsigEcmTrEcmId | read-create | current | ECM Stream Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.3.1.10 | ColumnsimPsigEcmTrEcmPid | read-create | current | ECM PID |
| 1.3.6.1.4.1.2696.1.1.1.5.3.1.11 | ColumnsimPsigEcmTrAccessCriteria | read-create | current | Access criteria. |
| 1.3.6.1.4.1.2696.1.1.1.5.4 | TablesimPsigFlowTrTable | not-accessible | current | This table contains all the active Flow Triggers. |
| 1.3.6.1.4.1.2696.1.1.1.5.4.1 | RowsimPsigFlowTrEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.2696.1.1.1.5.4.1.1 | ColumnsimPsigFlowTrIndex | read-create | current | The trigger index. |
| 1.3.6.1.4.1.2696.1.1.1.5.4.1.2 | ColumnsimPsigFlowTrType | read-create | current | Flow Type. |
| 1.3.6.1.4.1.2696.1.1.1.5.4.1.3 | ColumnsimPsigFlowTrSuCasId | read-create | current | Flow Super CAS identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.4.1.4 | ColumnsimPsigFlowTrFlowId | read-create | current | Flow Stream Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.4.1.5 | ColumnsimPsigFlowTrFlowPID | read-create | current | Flow PID |
| 1.3.6.1.4.1.2696.1.1.1.5.5 | TablesimPsigEvntTrTable | not-accessible | current | This table contains all the active EVNT Triggers. |
| 1.3.6.1.4.1.2696.1.1.1.5.5.1 | RowsimPsigEvntTrEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.2696.1.1.1.5.5.1.1 | ColumnsimPsigEvntTrIndex | not-accessible | current | The event trigger index. |
| 1.3.6.1.4.1.2696.1.1.1.5.5.1.2 | ColumnsimPsigEvntTrNetworkId | read-create | current | The Network Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.5.1.3 | ColumnsimPsigEvntTrONetworkId | read-create | current | The Original Network Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.5.1.4 | ColumnsimPsigEvntTrTransStreamId | read-create | current | Transport Stream Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.5.1.5 | ColumnsimPsigEvntTrServiceId | read-create | current | Event trigger service identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.5.1.6 | ColumnsimPsigEvntTrEventId | read-create | current | Event Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.5.1.7 | ColumnsimPsigEvntTrStartTime | read-create | current | Event start time. |
| 1.3.6.1.4.1.2696.1.1.1.5.5.1.8 | ColumnsimPsigEvntTrDuration | read-create | current | Event duration. |
| 1.3.6.1.4.1.2696.1.1.1.5.5.1.9 | ColumnsimPsigEvntTrPrivateData | read-create | current | EVNT Channel Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.6 | TablesimPsigDescInsTable | not-accessible | current | This table contains all the information related to descriptor insertion. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1 | RowsimPsigDescInsEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.1 | ColumnsimPsigDescInsIndex | read-create | current | The unique index into the table. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.2 | ColumnsimPsigDescInsAdminState | read-create | current | Used by an authorized manager to lock a conceptual row for exclusive write and create access. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.3 | ColumnsimPsigDescInsTrIndex | read-create | current | The unique index into the corresponding trigger table. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.4 | ColumnsimPsigDescInsTrType | read-create | current | The type of the trigger that caused this descriptor insert. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.5 | ColumnsimPsigDescInsLocationId | read-create | current | The type of target table for insertion. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.6 | ColumnsimPsigDescInsNetworkId | read-create | current | The Network Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.7 | ColumnsimPsigDescInsONetworkId | read-create | current | The Original Network Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.8 | ColumnsimPsigDescInsTransStreamId | read-create | current | Transport Stream Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.9 | ColumnsimPsigDescInsServiceId | read-create | current | Service Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.10 | ColumnsimPsigDescInsElmStreamId | read-create | current | Elementary stream identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.11 | ColumnsimPsigDescInsBouquetId | read-create | current | Event trigger bouquet identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.12 | ColumnsimPsigDescInsEventId | read-create | current | EVNT Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.13 | ColumnsimPsigDescInsONetworkId2loop | read-create | current | The Original Network Identifier second loop. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.14 | ColumnsimPsigDescInsNetworkIdOther | read-create | current | The Network Identifier other. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.15 | ColumnsimPsigDescInsTransStreamId2OrO | read-create | current | Transport Stream Identifier second loop or other. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.16 | ColumnsimPsigDescInsDelayType | read-create | current | Delay type, immediate or synchronized. |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.17 | ColumnsimPsigDescInsDelay | read-create | current | Insert delay |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.18 | ColumnsimPsigDescPrivDataSpfier | read-create | current | Private data specifier |
| 1.3.6.1.4.1.2696.1.1.1.5.6.1.19 | ColumnsimPsigDescInsEntryStatus | read-create | current | Other transport stream identifiers. |
| 1.3.6.1.4.1.2696.1.1.1.5.7 | TablesimPsigDescInsDescTable | not-accessible | current | This table contains all the descriptors to be inserted. |
| 1.3.6.1.4.1.2696.1.1.1.5.7.1 | RowsimPsigDescInsDescEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.2696.1.1.1.5.7.1.1 | ColumnsimPsigDescInsDescIndex | read-create | current | The unique index into the table. |
| 1.3.6.1.4.1.2696.1.1.1.5.7.1.2 | ColumnsimPsigDescInsDescAdminState | read-create | current | Used by an authorized manager to lock a conceptual row for exclusive write and create access. |
| 1.3.6.1.4.1.2696.1.1.1.5.7.1.3 | ColumnsimPsigDescInsDescriptor | read-create | current | The descriptor to be inserted. |
| 1.3.6.1.4.1.2696.1.1.1.5.7.1.4 | ColumnsimPsigDescInsDescriptorStatus | read-create | current | The insertion status of the descriptor. |
| 1.3.6.1.4.1.2696.1.1.1.5.7.1.5 | ColumnsimPsigDescInsDescEntryStatus | read-create | current | Other transport stream identifiers. |
| 1.3.6.1.4.1.2696.1.1.1.5.8 | TablesimPsigTblProvTable | not-accessible | current | This table is the interface to obtaining all PSI/SI information. |
| 1.3.6.1.4.1.2696.1.1.1.5.8.1 | RowsimPsigTblProvEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.2696.1.1.1.5.8.1.1 | ColumnsimPsigTblProvIndex | read-only | current | The unique index into the table. |
| 1.3.6.1.4.1.2696.1.1.1.5.8.1.2 | ColumnsimPsigTblProvTableId | read-only | current | The table identifier of the table. |
| 1.3.6.1.4.1.2696.1.1.1.5.8.1.3 | ColumnsimPsigTblNetworkId | read-create | current | The Network Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.8.1.4 | ColumnsimPsigTblONetworkId | read-create | current | The Original Network Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.8.1.5 | ColumnsimPsigTblTransStreamId | read-create | current | Transport Stream Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.8.1.6 | ColumnsimPsigTblServiceId | read-create | current | Service Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.8.1.7 | ColumnsimPsigTblBouquetId | read-create | current | Event trigger bouquet identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.8.1.8 | ColumnsimPsigTblEventId | read-create | current | Event Identifier |
| 1.3.6.1.4.1.2696.1.1.1.5.8.1.9 | ColumnsimPsigTblONetworkId2loop | read-create | current | The Original Network Identifier second loop. |
| 1.3.6.1.4.1.2696.1.1.1.5.8.1.10 | ColumnsimPsigTblNetworkIdOther | read-create | current | The Network Identifier other. |
| 1.3.6.1.4.1.2696.1.1.1.5.8.1.11 | ColumnsimPsigTblTransStreamId2OrO | read-create | current | Transport Stream Identifier second loop or other. |
| 1.3.6.1.4.1.2696.1.1.1.5.8.1.12 | ColumnsimPsigTblSegmentNr | read-create | current | Segment Number |
| 1.3.6.1.4.1.2696.1.1.1.5.8.1.13 | ColumnsimPsigTblProvPart | read-create | current | Event Identifier |
| 1.3.6.1.4.1.2696.1.1.1.5.8.1.14 | ColumnsimPsigTblProvPartNumber | read-create | current | Each table is subdivided into parts for SNMP transport if necessary. The part number identifies the table part of this entry. |
| 1.3.6.1.4.1.2696.1.1.1.5.9 | TablesimPsigPIDProvTable | not-accessible | current | This is the PID provisioning table. |
| 1.3.6.1.4.1.2696.1.1.1.5.9.1 | RowsimPsigPIDProvEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.2696.1.1.1.5.9.1.1 | ColumnsimPsigPIDProvFlowType | read-only | current | Flow Type. |
| 1.3.6.1.4.1.2696.1.1.1.5.9.1.2 | ColumnsimPsigPIDProvSuCasId | read-only | current | Flow Super CAS identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.9.1.3 | ColumnsimPsigPIDProvFlowId | read-only | current | Flow Stream Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.9.1.4 | ColumnsimPsigPIDProvFlowPID | read-only | current | Flow PID |
| 1.3.6.1.4.1.2696.1.1.1.5.10 | TablesimPsigPdTrTable | not-accessible | current | This table contains all the active Private Data Triggers. |
| 1.3.6.1.4.1.2696.1.1.1.5.10.1 | RowsimPsigPdTrEntry | not-accessible | current | Information about a single table entry. |
| 1.3.6.1.4.1.2696.1.1.1.5.10.1.1 | ColumnsimPsigPdTrIndex | not-accessible | current | The trigger index. |
| 1.3.6.1.4.1.2696.1.1.1.5.10.1.2 | ColumnsimPsigPdTrNetworkId | read-create | current | The Network Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.10.1.3 | ColumnsimPsigPdTrONetworkId | read-create | current | The Original Network Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.10.1.4 | ColumnsimPsigPdTrTransStreamId | read-create | current | Transport Stream Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.10.1.5 | ColumnsimPsigPdTrServiceId | read-create | current | Service Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.10.1.6 | ColumnsimPsigPdTrEsId | read-create | current | Elementary Stream Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.10.1.7 | ColumnsimPsigPdTrType | read-create | current | ECM Trigger Type. |
| 1.3.6.1.4.1.2696.1.1.1.5.10.1.8 | ColumnsimPsigPdTrSuCasId | read-create | current | ECM Client Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.10.1.9 | ColumnsimPsigPdTrPdId | read-create | current | ECM Stream Identifier. |
| 1.3.6.1.4.1.2696.1.1.1.5.10.1.10 | ColumnsimPsigPdTrPdPid | read-create | current | ECM PID |
| 1.3.6.1.4.1.2696.1.1.1.5.10.1.11 | ColumnsimPsigPdTrPdStreamType | read-create | current | Stream type of Private Data Stream |
| 1.3.6.1.4.1.2696.1.1.1.5.10.1.12 | ColumnsimPsigPdTrPrivateData | read-create | current | Private Data string. |
| 1.3.6.1.4.1.2696.1.1.2 | NodesimMIBConformance | |||
| 1.3.6.1.4.1.2696.1.1.2.1 | NodesimCompliances | |||
| 1.3.6.1.4.1.2696.1.1.2.1.1 | CompliancesimEcmgCompliance | current | The compliance statement for SNMP Entities which host or represent ECMGs | |
| 1.3.6.1.4.1.2696.1.1.2.1.2 | CompliancesimEmOrPdCompliance | current | The compliance statement for SNMP Entities which host or represent EMMGs or PDGs | |
| 1.3.6.1.4.1.2696.1.1.2.1.3 | CompliancesimCpsigCompliance | current | The compliance statement for SNMP Entities which host or represent C(P)SIG)s | |
| 1.3.6.1.4.1.2696.1.1.2.1.4 | CompliancesimPsigCompliance | current | The compliance statement for SNMP Entities which host or represent (P)SIG)s | |
| 1.3.6.1.4.1.2696.1.1.2.2 | NodesimGroups | |||
| 1.3.6.1.4.1.2696.1.1.2.2.1 | GroupsimIdentGroup | current | A collection of objects providing software configuration infomation. | |
| 1.3.6.1.4.1.2696.1.1.2.2.2 | GroupsimEcmgGroup | current | A collection of objects providing ECMG infomation. | |
| 1.3.6.1.4.1.2696.1.1.2.2.3 | GroupsimEmOrPdGroup | current | A collection of objects providing EMMG/PDG infomation. | |
| 1.3.6.1.4.1.2696.1.1.2.2.4 | GroupsimEmOrPdLapGGroup | current | A collection of objects providing LAPG infomation. | |
| 1.3.6.1.4.1.2696.1.1.2.2.5 | GroupsimCpsigGroup | current | A collection of objects providing C(P)SIG) infomation. | |
| 1.3.6.1.4.1.2696.1.1.2.2.6 | GroupsimPsigGroup | current | A collection of objects providing (P)SIG) infomation. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AdministrativeState | BITS { locked(0), unlocked(1), shuttingDown(2) } | current | Administrative state as defined by ITU-T Recommendation X.734 |
| CaDescInsMode | BITS { psigInsertion(0), noPsigInsertion(1) } | current | Conditional Access Descriptor Insertion Type. |
| DelayType | BITS { immediate(0), synchronized(1) } | current | Delay type. |
| DescriptorStatus | BITS { success(0), unknownTrigger(1), unknownLocation(2), unsupportedDelay(3), unknownContext(4), unknownOtherTS(5), unknownNetwork(6), unknownTS(7), unknownES(8), unknownBouquet(9), unknownEvent(10), tableNotSupported(11), tableFull(12), other(13) } | current | The return status of descriptor insertion. |
| ECMGChannelId | INTEGER (0..65535) | current | The ECM_channel_ID is represented as a 2 bytes unsigned integer. |
| ECMGCSuCasId | Unsigned32 | current | Adding this to fix compile issue |
| ECMGDelayValue | Signed16 | current | The value od xxx_Delay_Start / _Stop in ECMG protocol. |
| ECMTriggerType | BITS { ecmStreamOpen(0), ecmStreamClose(1), ecmStreamChange(2), accessCriteriaChange(3) } | current | The type of an ECM trigger in a PSI generator. |
| EMMGChannelId | INTEGER (0..65535) | current | Indicates the Data Channel Id. |
| EMMGCommCapability | BITS { both(0), tcp(1), udp(2) } | current | Type of communications capability between EMMG/PDG and Multiplexer: TCP or UDP or both. |
| EMMGCommType | BITS { tcp(0), udp(1) } | current | Type of communications capability between EMMG/PDG and Multiplexer: TCP or UDP. |
| EMMGDataType | BITS { emm(0), other(1) } | current | Type of data carried in the EMMG/PDG Multiplexer stream. |
| FlowId | INTEGER (0..65535) | current | The flow identifier is represented as a 2 bytes unsigned integer. |
| FlowType | BITS { ecm(0), emm(1), privatedata(2) } | current | Type of Flow: EMM, ECM, or private data. |
| InsertLocation | BITS { pmtLoop1(0), pmtLoop2(1), cat(2), nitLopp1ActualNet(3), nitLoop2ActualNet(4), nitLopp1OtherNet(5), nitLoop2OtherNet(6), batLoop1(7), batLoop2(8), sdtActualTS(9), sdtOtherTS(10), eitPFActualTS(11), eitPFOtherTS(12), eitScheduleActualTS(13), eitScheduleOtherTS(14) } | current | Descriptor insertion location. |
| ProvTableId | BITS { pat(0), cat(1), pmt(2), nitActualNet(3), nitOtherNet(4), bat(5), sdtActualTS(6), sdtOtherTS(7), eitPFActualTS(8), eitPFOtherTS(9), eitScheduleActualTS(10), eitScheduleOtherTS(11) } | current | Provision table identifier. |
| PsigType | BITS { sig(0), psig(1), psisig(2) } | current | Psig type. |
| SectionTSPktFlag | BITS { section(0), tspacket(1) } | current | Format of ECM, EMM, Private data datagrams: section or TS packet. |
| Signed16 | INTEGER (0..65535) | current | Adding this to fix compile issue |
| StreamId | INTEGER (0..65535) | current | The Stream_ID is represented as a 2 bytes unsigned integer. |
| SuperCasId | Unsigned32 | current | SuperCASId / Client_ID: a unsigned 32-bit identifier. |
| TriggerType | BITS { dvbEvent(0), futureDvbEvent(1), newEcmStream(2), flowPidChange(3), accessCriteriaChange(4), ecmStreamClosure(5), pdStreamCEvent(6) } | current | The type of a trigger in a PSI generator. |