SITEBOSS-570-STD-MIB
1294 objects
MIB module for managing Asentria SiteBoss 570
Imported Objects
| ASENTRIA-ROOT-MIB | asentria |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.1.3.13.1 | TableactionCallNumberTable | not-accessible | current | Table of phone numbers to dial for modem actions |
| 1.3.1.3.13.1.1 | RowactionCallNumberEntry | not-accessible | current | Entry for table of phone numbers to dial for modem actions |
| 1.3.1.3.13.1.1.1 | ColumnactionCallNumberIndex | read-only | current | Index for table of phone numbers to dial for modem actions |
| 1.3.1.3.13.1.1.2 | ColumnactionCallNumber | read-write | current | The number to dial for this action slot |
| 1.3.1.3.13.2 | TableactionPagerTable | not-accessible | current | Table of pager configurations |
| 1.3.1.3.13.2.1 | RowactionPagerEntry | not-accessible | current | Entry for table of pager configurations |
| 1.3.1.3.13.2.1.1 | ColumnactionPagerIndex | read-only | current | index for table of pager configurations |
| 1.3.1.3.13.2.1.2 | ColumnactionPagerType | read-write | current | type of this pager configuration |
| 1.3.1.3.13.2.1.3 | ColumnactionPagerNumber | read-write | current | phone number to dial for this pager configuration |
| 1.3.1.3.13.2.1.4 | ColumnactionPagerID | read-write | current | ID to use for this pager configuration |
| 1.3.1.3.13.2.1.5 | ColumnactionPagerMessage | read-write | current | message to use for this pager configuration |
| 1.3.1.3.13.2.1.6 | ColumnactionPagerPostCalloutDelay | read-write | current | Seconds to wait after dialing before sending ID |
| 1.3.1.3.13.2.1.7 | ColumnactionPagerPostIDDelay | read-write | current | Seconds to wait after sending ID to send message |
| 1.3.1.3.13.6 | TableactionHostTable | not-accessible | current | Table of network hosts to use for network-based actions |
| 1.3.1.3.13.6.1 | RowactionHostEntry | not-accessible | current | Entry for table of network hosts to use for network-based actions |
| 1.3.1.3.13.6.1.1 | ColumnactionHostIndex | read-only | current | Index for table of network hosts to use for network-based actions |
| 1.3.1.3.13.6.1.2 | ColumnactionHost | read-write | current | Hostname/IP address used as destination for network-based action (e.g., trap) |
| 1.3.1.3.13.7 | TableactionEmailTable | not-accessible | current | Table of email addresses to use for email actions |
| 1.3.1.3.13.7.1 | RowactionEmailEntry | not-accessible | current | Entry for table of email addresses to use for email actions |
| 1.3.1.3.13.7.1.1 | ColumnactionEmailIndex | read-only | current | Index for table of email addresses to use for email actions |
| 1.3.1.3.13.7.1.2 | ColumnactionEmail | read-write | current | email address |
| 1.3.1.3.13.8 | ScalaractionParseError | read-only | current | When a user attempts to configure an invalid action setting/ object, this object says why it was invalid. |
| 1.3.6.1.4.1.43.35.8.4.8.3 | ScalarmodemStatus | read-only | current | status of modem (idle, dialing, connected, etc.) |
| 1.3.6.1.4.1.43.35.8.4.8.4 | TablemodemCLIDLogTable | not-accessible | current | Table of numbers of recent dialing parties |
| 1.3.6.1.4.1.43.35.8.4.8.4.1 | RowmodemCLIDLogEntry | not-accessible | current | Entry for table of CLID log entries |
| 1.3.6.1.4.1.43.35.8.4.8.4.1.1 | ColumnmodemCLIDLogIndex | read-only | current | Index for table of CLID log entries |
| 1.3.6.1.4.1.43.35.8.4.8.4.1.2 | ColumnmodemCLIDLogNumber | read-write | current | recently logged number of dialing party |
| 1.3.6.1.4.1.43.45.1.2.2.1.1.2.2 | ScalartrapAuthFailEnable | read-write | current | ON/OFF enable trap sent upon SNMP authentication failure |
| 1.3.6.1.4.1.45.8.1.1.12.3.1 | ScalarconsoleDuplex | read-write | current | ON/OFF characters echoed on telnet command session |
| 1.3.6.1.4.1.45.8.1.1.12.3.2 | ScalarconsoleTimeout | read-write | current | Minutes of inactivity after which telnet command session is terminated |
| 1.3.6.1.4.1.45.8.1.1.12.3.4 | ScalarconsoleBaud | read-write | current | Console baud rate |
| 1.3.6.1.4.1.45.8.1.1.12.3.5 | ScalarconsoleFormat | read-write | current | Console data format (8N1,7E1,7O1,7N1,8O2) |
| 1.3.6.1.4.1.45.8.1.1.12.3.6 | ScalarconsoleHsk | read-write | current | Console handshaking mode |
| 1.3.6.1.4.1.45.8.1.1.12.3.7 | ScalarconsoleConfirm | read-write | current | ON/OFF Prompt to confirm certain actions |
| 1.3.6.1.4.1.171.10.37.37.4.5.1 | ScalarwebEnable | read-write | current | ON/OFF for the web interface |
| 1.3.6.1.4.1.171.10.37.37.4.5.2 | ScalarwebPort | read-write | current | TCP port on which web interface listens |
| 1.3.6.1.4.1.171.10.37.37.4.5.3 | ScalarwebTimeout | read-write | current | Web interface session timeout (seconds) |
| 1.3.6.1.4.1.272.4.17.3 | ScalarsysMTU | read-write | current | Maximum transfer unit for ethernet interfaces |
| 1.3.6.1.4.1.272.4.17.4 | ScalarsysAnswerString | read-write | current | String displayed upon login |
| 1.3.6.1.4.1.272.4.17.6 | ScalarsysEventFileID | read-write | current | ID string for events file |
| 1.3.6.1.4.1.272.4.17.7 | ScalarsysEscapeCharacter | read-write | current | Decimal ASCII code of the system escape character |
| 1.3.6.1.4.1.272.4.17.11 | ScalarsysCharMask | read-write | current | Character mask used for ignoring certain characters on serial ports when assembling data records (when port mode is ASCII) |
| 1.3.6.1.4.1.272.4.17.12 | ScalarsysPrompt | read-write | current | Prompt to use in a commnand session |
| 1.3.6.1.4.1.272.4.17.13 | ScalarsysBootStatus | read-only | current | String describing the boot status of the unit (Booted OK/ still booting |
| 1.3.6.1.4.1.2435.2.4.3.100.1 | ScalarwirelessMode | read-write | current | Wireless mode (OFF,PERMANENT-EDGE) |
| 1.3.6.1.4.1.2435.2.4.3.100.2 | ScalarwirelessAPN | read-write | current | Wireless access point name |
| 1.3.6.1.4.1.2435.2.4.3.100.3 | ScalarwirelessIdleTimeout | read-write | current | Wireless idle timeout |
| 1.3.6.1.4.1.2435.2.4.3.100.5 | ScalarwirelessPIN | read-write | current | Wireless modem SIM PIN |
| 1.3.6.1.4.1.2435.2.4.3.100.9 | ScalarwirelessDRE | read-write | current | Default route enable for wireless network interface. When this is ON, the wireless link, if up, becomes the default route, overriding the default route setting… |
| 1.3.6.1.4.1.2435.2.4.3.100.10 | ScalarwirelessPPPUsername | read-write | current | Username for PPP-based wireless modem connections. |
| 1.3.6.1.4.1.2435.2.4.3.100.11 | ScalarwirelessFirewall | read-write | current | Enable wireless modem firewall. |
| 1.3.6.1.4.1.2435.2.4.3.100.12 | ScalarwirelessKeepaliveThreshold | read-write | current | Minutes of no RX activity before sending keep-alive. |
| 1.3.6.1.4.1.2435.2.4.3.100.13 | ScalarwirelessPPPDebug | read-write | current | Enable wireless modem PPP debug. |
| 1.3.6.1.4.1.2544.1.11.7.3.1.100.1.1 | Scalaripv6DefaultRouter | read-write | current | The IPv6 default router in use. |
| 1.3.6.1.4.1.3052.6.1.1.1 | Identitys570 | MIB module for managing Asentria SiteBoss 570 | ||
| 1.3.6.1.4.1.3052.6.1.1.1.1 | ScalaresPointEntry | not-accessible | current | Entry for EventSensor point table |
| 1.3.6.1.4.1.3052.6.1.1.1.1.1 | ScalaresIndexES | read-only | current | The part of the point index that refers to an EventSensor. The point index is a string of 3 numbers separated by periods. It contains all the information neces… |
| 1.3.6.1.4.1.3052.6.1.1.1.1.2 | ScalaresIndexPC | read-only | current | The part of the point index that refers to point class. The point index is a string of 3 numbers separated by periods. It contains all the information necessar… |
| 1.3.6.1.4.1.3052.6.1.1.1.1.3 | ScalaresIndexPoint | read-only | current | The part of the point index that delineates which sensor on the EventSensor. So this combined with esIndexPC (Point Class or type) and esIndexES (which EventSe… |
| 1.3.6.1.4.1.3052.6.1.1.1.1.4 | ScalaresPointName | read-write | current | The name of the point on an EventSensor. For example, 'AC temp' (in the case of the temperature sensor on an EventSensor). There can be multiple points of the … |
| 1.3.6.1.4.1.3052.6.1.1.1.1.5 | ScalaresPointInEventState | read-write | current | A number referring to the event state of a point on an EventSensor. This number can have different meanings depending on the point class. If the point class is… |
| 1.3.6.1.4.1.3052.6.1.1.1.1.6 | ScalaresPointValueInt | read-write | current | A read-only number referring to the value of a point on an EventSensor. If the point class is temperature, then this object is the temperature in its configure… |
| 1.3.6.1.4.1.3052.6.1.1.1.1.7 | ScalaresPointValueStr | read-only | current | A string referring to the value of a point on an EventSensor. For contact closures this object is either 'Open' or 'Closed'. For outputs this object is a conca… |
| 1.3.6.1.4.1.3052.6.1.1.1.1.8 | ScalaresPointTimeLastChange | read-only | current | The time of the last time an event was triggerred for a point on an EventSensor in MM/DD/YY HH:MM:SS format. For contact closures, the possible events are Acti… |
| 1.3.6.1.4.1.3052.6.1.1.1.1.9 | ScalaresPointTimetickLastChange | read-only | current | The time of the last time an event was triggerred for a point on an EventSensor in 100ths of seconds since reset. For contact closures, the possible events are… |
| 1.3.6.1.4.1.3052.6.1.1.1.4 | ScalarkeyInterface | read-write | current | This object represents a setting key interface. When setting this object, the value to set is the 'sk' command you would enter on the command line (without the… |
| 1.3.6.1.4.1.3052.6.1.1.1.110 | Notifications570StockContactClosureTrap | current | A stock contact closure trap is issued when a contact closure event happens. | |
| 1.3.6.1.4.1.3052.6.1.1.1.120 | Notifications570StockTempTrap | current | A stock temperature trap is issued when a temperature event happens. | |
| 1.3.6.1.4.1.3052.6.1.1.1.130 | Notifications570StockHumidityTrap | current | A stock humidity trap is issued when a humidity event happens. | |
| 1.3.6.1.4.1.3052.6.1.1.1.140 | Notifications570StockAnalogTrap | current | A stock analog trap is issued when an analog sensor event happens. | |
| 1.3.6.1.4.1.3052.6.1.1.1.150 | Notifications570StockOutputTrap | current | A stock output trap is issued when an output event happens. That is, depending on the configuration, when an output changes state for any reason, this trap wil… | |
| 1.3.6.1.4.1.3052.6.1.1.1.503 | Notifications570StockDataAlarmTrap | current | The stock data alarm trap is issued when a data alarm happens. | |
| 1.3.6.1.4.1.3052.6.1.1.1.505 | Notifications570StockNoDataAlarmTrap | current | The stock no-data alarm trap is issued when the unit has received no data for a configured interval within a configured schedule. | |
| 1.3.6.1.4.1.3052.6.1.1.1.506 | Notifications570StockSchedTrap | current | The stock scheduled alarm trap is issued when the current time reaches the scheduled alarm time. | |
| 1.3.6.1.4.1.3052.6.1.1.1.507 | Notifications570StockImmediateTrap | current | The stock immediate alarm trap is issued when the user enters the DOTRAP command. | |
| 1.3.6.1.4.1.3052.6.1.1.1.510 | Notifications570StockCTSTrap | current | A stock CTS trap is issued when an RS-232 CTS event happens. | |
| 1.3.6.1.4.1.3052.6.1.1.1.511 | Notifications570CPEDownTrap | current | A stock CPE Down trap is issued when a CPE Down event happens. | |
| 1.3.6.1.4.1.3052.6.1.1.1.515 | Notifications570FuelSensorDisconnectTrap | current | A stock Fuel Sensor Disconnect trap is issued when a Fuel Sensor Disconnect or Connect (Return to Normal) event happens. | |
| 1.3.6.1.4.1.3052.6.1.1.1.519 | Notifications570FuelSensorVolumeTrap | current | A stock Fuel Sensor Volume trap is issued when a Fuel Sensor Volume event happens | |
| 1.3.6.1.4.1.3052.6.1.1.1.520 | Notifications570ACPowerMonitorAvgVoltageTrap | current | A stock AC power monitor average voltage trap is issued when an AC power monitor average voltage event happens. | |
| 1.3.6.1.4.1.3052.6.1.1.1.521 | Notifications570ACPowerMonitorAvgCurrentTrap | current | A stock AC power monitor average current trap is issued when an AC power monitor average current event happens. | |
| 1.3.6.1.4.1.3052.6.1.1.1.522 | Notifications570ACPowerMonitorFrequencyTrap | current | A stock AC power monitor frequency trap is issued when an AC power monitor frequency event happens. | |
| 1.3.6.1.4.1.3052.6.1.1.1.523 | Notifications570ACPowerMonitorTRPTrap | current | A stock AC power monitor TRP (total real power) trap is issued when an AC power monitor TRP event happens. | |
| 1.3.6.1.4.1.3052.6.1.1.1.524 | Notifications570ACPowerMonitorDisconnectTrap | current | A stock AC power monitor disconnect trap is issued when an AC power monitor disconnect event happens. | |
| 1.3.6.1.4.1.3052.6.1.1.1.525 | Notifications570StockLoadSheddingTrap | current | A stock Load Shedding trap is issued when a Load Shedding event happens. | |
| 1.3.6.1.4.1.3052.6.1.1.1.526 | Notifications570StockScriptTrap | current | A stock script trap is issued when a script triggers an event via a_lib.PostEvent() called with no trap number (or this trap number) specified. | |
| 1.3.6.1.4.1.3052.6.1.1.1.540 | Notifications570ACTotalPowerFactorTrap | current | A stock AC power monitor total power factor trap is issued when an AC power monitor total power factor event happens. | |
| 1.3.6.1.4.1.3052.6.1.1.1.543 | Notifications570ResetTrap | current | A stock reset trap is issued when a reset event happens. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1000 | Notifications570UserTrap1000 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1000. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1001 | Notifications570UserTrap1001 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1001. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1002 | Notifications570UserTrap1002 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1002. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1003 | Notifications570UserTrap1003 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1003. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1004 | Notifications570UserTrap1004 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1004. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1005 | Notifications570UserTrap1005 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1005. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1006 | Notifications570UserTrap1006 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1006. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1007 | Notifications570UserTrap1007 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1007. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1008 | Notifications570UserTrap1008 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1008. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1009 | Notifications570UserTrap1009 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1009. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1010 | Notifications570UserTrap1010 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1010. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1011 | Notifications570UserTrap1011 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1011. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1012 | Notifications570UserTrap1012 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1012. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1013 | Notifications570UserTrap1013 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1013. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1014 | Notifications570UserTrap1014 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1014. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1015 | Notifications570UserTrap1015 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1015. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1016 | Notifications570UserTrap1016 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1016. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1017 | Notifications570UserTrap1017 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1017. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1018 | Notifications570UserTrap1018 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1018. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1019 | Notifications570UserTrap1019 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1019. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1020 | Notifications570UserTrap1020 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1020. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1021 | Notifications570UserTrap1021 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1021. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1022 | Notifications570UserTrap1022 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1022. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1023 | Notifications570UserTrap1023 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1023. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1024 | Notifications570UserTrap1024 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1024. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1025 | Notifications570UserTrap1025 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1025. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1026 | Notifications570UserTrap1026 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1026. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1027 | Notifications570UserTrap1027 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1027. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1028 | Notifications570UserTrap1028 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1028. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1029 | Notifications570UserTrap1029 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1029. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1030 | Notifications570UserTrap1030 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1030. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1031 | Notifications570UserTrap1031 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1031. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1032 | Notifications570UserTrap1032 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1032. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1033 | Notifications570UserTrap1033 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1033. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1034 | Notifications570UserTrap1034 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1034. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1035 | Notifications570UserTrap1035 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1035. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1036 | Notifications570UserTrap1036 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1036. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1037 | Notifications570UserTrap1037 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1037. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1038 | Notifications570UserTrap1038 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1038. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1039 | Notifications570UserTrap1039 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1039. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1040 | Notifications570UserTrap1040 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1040. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1041 | Notifications570UserTrap1041 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1041. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1042 | Notifications570UserTrap1042 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1042. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1043 | Notifications570UserTrap1043 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1043. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1044 | Notifications570UserTrap1044 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1044. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1045 | Notifications570UserTrap1045 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1045. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1046 | Notifications570UserTrap1046 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1046. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1047 | Notifications570UserTrap1047 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1047. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1048 | Notifications570UserTrap1048 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1048. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1049 | Notifications570UserTrap1049 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1049. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1050 | Notifications570UserTrap1050 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1050. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1051 | Notifications570UserTrap1051 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1051. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1052 | Notifications570UserTrap1052 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1052. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1053 | Notifications570UserTrap1053 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1053. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1054 | Notifications570UserTrap1054 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1054. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1055 | Notifications570UserTrap1055 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1055. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1056 | Notifications570UserTrap1056 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1056. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1057 | Notifications570UserTrap1057 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1057. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1058 | Notifications570UserTrap1058 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1058. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1059 | Notifications570UserTrap1059 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1059. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1060 | Notifications570UserTrap1060 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1060. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1061 | Notifications570UserTrap1061 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1061. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1062 | Notifications570UserTrap1062 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1062. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1063 | Notifications570UserTrap1063 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1063. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1064 | Notifications570UserTrap1064 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1064. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1065 | Notifications570UserTrap1065 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1065. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1066 | Notifications570UserTrap1066 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1066. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1067 | Notifications570UserTrap1067 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1067. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1068 | Notifications570UserTrap1068 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1068. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1069 | Notifications570UserTrap1069 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1069. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1070 | Notifications570UserTrap1070 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1070. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1071 | Notifications570UserTrap1071 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1071. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1072 | Notifications570UserTrap1072 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1072. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1073 | Notifications570UserTrap1073 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1073. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1074 | Notifications570UserTrap1074 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1074. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1075 | Notifications570UserTrap1075 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1075. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1076 | Notifications570UserTrap1076 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1076. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1077 | Notifications570UserTrap1077 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1077. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1078 | Notifications570UserTrap1078 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1078. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1079 | Notifications570UserTrap1079 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1079. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1080 | Notifications570UserTrap1080 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1080. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1081 | Notifications570UserTrap1081 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1081. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1082 | Notifications570UserTrap1082 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1082. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1083 | Notifications570UserTrap1083 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1083. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1084 | Notifications570UserTrap1084 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1084. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1085 | Notifications570UserTrap1085 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1085. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1086 | Notifications570UserTrap1086 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1086. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1087 | Notifications570UserTrap1087 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1087. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1088 | Notifications570UserTrap1088 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1088. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1089 | Notifications570UserTrap1089 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1089. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1090 | Notifications570UserTrap1090 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1090. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1091 | Notifications570UserTrap1091 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1091. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1092 | Notifications570UserTrap1092 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1092. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1093 | Notifications570UserTrap1093 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1093. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1094 | Notifications570UserTrap1094 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1094. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1095 | Notifications570UserTrap1095 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1095. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1096 | Notifications570UserTrap1096 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1096. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1097 | Notifications570UserTrap1097 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1097. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1098 | Notifications570UserTrap1098 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1098. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1099 | Notifications570UserTrap1099 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1099. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1100 | Notifications570UserTrap1100 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1100. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1101 | Notifications570UserTrap1101 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1101. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1102 | Notifications570UserTrap1102 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1102. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1103 | Notifications570UserTrap1103 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1103. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1104 | Notifications570UserTrap1104 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1104. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1105 | Notifications570UserTrap1105 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1105. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1106 | Notifications570UserTrap1106 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1106. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1107 | Notifications570UserTrap1107 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1107. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1108 | Notifications570UserTrap1108 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1108. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1109 | Notifications570UserTrap1109 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1109. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1110 | Notifications570UserTrap1110 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1110. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1111 | Notifications570UserTrap1111 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1111. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1112 | Notifications570UserTrap1112 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1112. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1113 | Notifications570UserTrap1113 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1113. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1114 | Notifications570UserTrap1114 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1114. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1115 | Notifications570UserTrap1115 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1115. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1116 | Notifications570UserTrap1116 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1116. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1117 | Notifications570UserTrap1117 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1117. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1118 | Notifications570UserTrap1118 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1118. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1119 | Notifications570UserTrap1119 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1119. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1120 | Notifications570UserTrap1120 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1120. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1121 | Notifications570UserTrap1121 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1121. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1122 | Notifications570UserTrap1122 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1122. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1123 | Notifications570UserTrap1123 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1123. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1124 | Notifications570UserTrap1124 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1124. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1125 | Notifications570UserTrap1125 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1125. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1126 | Notifications570UserTrap1126 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1126. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1127 | Notifications570UserTrap1127 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1127. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1128 | Notifications570UserTrap1128 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1128. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1129 | Notifications570UserTrap1129 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1129. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1130 | Notifications570UserTrap1130 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1130. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1131 | Notifications570UserTrap1131 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1131. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1132 | Notifications570UserTrap1132 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1132. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1133 | Notifications570UserTrap1133 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1133. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1134 | Notifications570UserTrap1134 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1134. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1135 | Notifications570UserTrap1135 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1135. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1136 | Notifications570UserTrap1136 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1136. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1137 | Notifications570UserTrap1137 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1137. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1138 | Notifications570UserTrap1138 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1138. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1139 | Notifications570UserTrap1139 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1139. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1140 | Notifications570UserTrap1140 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1140. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1141 | Notifications570UserTrap1141 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1141. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1142 | Notifications570UserTrap1142 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1142. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1143 | Notifications570UserTrap1143 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1143. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1144 | Notifications570UserTrap1144 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1144. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1145 | Notifications570UserTrap1145 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1145. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1146 | Notifications570UserTrap1146 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1146. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1147 | Notifications570UserTrap1147 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1147. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1148 | Notifications570UserTrap1148 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1148. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1149 | Notifications570UserTrap1149 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1149. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1150 | Notifications570UserTrap1150 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1150. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1151 | Notifications570UserTrap1151 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1151. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1152 | Notifications570UserTrap1152 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1152. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1153 | Notifications570UserTrap1153 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1153. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1154 | Notifications570UserTrap1154 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1154. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1155 | Notifications570UserTrap1155 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1155. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1156 | Notifications570UserTrap1156 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1156. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1157 | Notifications570UserTrap1157 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1157. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1158 | Notifications570UserTrap1158 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1158. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1159 | Notifications570UserTrap1159 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1159. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1160 | Notifications570UserTrap1160 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1160. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1161 | Notifications570UserTrap1161 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1161. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1162 | Notifications570UserTrap1162 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1162. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1163 | Notifications570UserTrap1163 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1163. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1164 | Notifications570UserTrap1164 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1164. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1165 | Notifications570UserTrap1165 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1165. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1166 | Notifications570UserTrap1166 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1166. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1167 | Notifications570UserTrap1167 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1167. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1168 | Notifications570UserTrap1168 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1168. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1169 | Notifications570UserTrap1169 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1169. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1170 | Notifications570UserTrap1170 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1170. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1171 | Notifications570UserTrap1171 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1171. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1172 | Notifications570UserTrap1172 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1172. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1173 | Notifications570UserTrap1173 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1173. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1174 | Notifications570UserTrap1174 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1174. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1175 | Notifications570UserTrap1175 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1175. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1176 | Notifications570UserTrap1176 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1176. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1177 | Notifications570UserTrap1177 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1177. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1178 | Notifications570UserTrap1178 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1178. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1179 | Notifications570UserTrap1179 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1179. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1180 | Notifications570UserTrap1180 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1180. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1181 | Notifications570UserTrap1181 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1181. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1182 | Notifications570UserTrap1182 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1182. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1183 | Notifications570UserTrap1183 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1183. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1184 | Notifications570UserTrap1184 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1184. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1185 | Notifications570UserTrap1185 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1185. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1186 | Notifications570UserTrap1186 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1186. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1187 | Notifications570UserTrap1187 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1187. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1188 | Notifications570UserTrap1188 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1188. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1189 | Notifications570UserTrap1189 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1189. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1190 | Notifications570UserTrap1190 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1190. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1191 | Notifications570UserTrap1191 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1191. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1192 | Notifications570UserTrap1192 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1192. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1193 | Notifications570UserTrap1193 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1193. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1194 | Notifications570UserTrap1194 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1194. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1195 | Notifications570UserTrap1195 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1195. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1196 | Notifications570UserTrap1196 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1196. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1197 | Notifications570UserTrap1197 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1197. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1198 | Notifications570UserTrap1198 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1198. | |
| 1.3.6.1.4.1.3052.6.1.1.1.1199 | Notifications570UserTrap1199 | current | This user-defined trap is issued when an event happens that causes a trap with specific trap type 1199. | |
| 1.3.6.1.4.1.3052.6.2.1.1 | ScalaresNumberEventSensors | read-only | current | The number of EventSensors recognized by the unit, including the internal EventSensor. Range: 1-17 |
| 1.3.6.1.4.1.3052.6.2.1.2 | TableesTable | not-accessible | current | The table of what EventSensors are attached to the unit, including the internal EventSensor |
| 1.3.6.1.4.1.3052.6.2.1.2.1 | RowesEntry | not-accessible | current | Table entry for EventSensor table |
| 1.3.6.1.4.1.3052.6.2.1.2.1.1 | ColumnesIndex | read-only | current | This number refers to an EventSensor; it has the same meaning as the esIndexES object (see above), except that this object is used only within the esTable bran… |
| 1.3.6.1.4.1.3052.6.2.1.2.1.2 | ColumnesName | read-only | current | The name of the EventSensor |
| 1.3.6.1.4.1.3052.6.2.1.2.1.3 | ColumnesID | read-only | current | The factory-assigned ID of the EventSensor |
| 1.3.6.1.4.1.3052.6.2.1.2.1.4 | ColumnesNumberTempSensors | read-only | current | The number of temperature sensors on the EventSensor |
| 1.3.6.1.4.1.3052.6.2.1.2.1.5 | ColumnesTempReportingMode | read-only | current | Description of how temperature values should be interpreted. |
| 1.3.6.1.4.1.3052.6.2.1.2.1.6 | ColumnesNumberCCs | read-only | current | The number of contact closures on the EventSensor. |
| 1.3.6.1.4.1.3052.6.2.1.2.1.7 | ColumnesCCReportingMode | read-only | current | Description of how CC values should be interpreted. |
| 1.3.6.1.4.1.3052.6.2.1.2.1.8 | ColumnesNumberHumidSensors | read-only | current | The number of humidity sensors on the EventSensor. |
| 1.3.6.1.4.1.3052.6.2.1.2.1.9 | ColumnesHumidReportingMode | read-only | current | Description of how humidity sensor values should be interpreted. |
| 1.3.6.1.4.1.3052.6.2.1.2.1.10 | ColumnesNumberNoiseSensors | read-only | current | The number of noise sensors on the EventSensor. |
| 1.3.6.1.4.1.3052.6.2.1.2.1.11 | ColumnesNoiseReportingMode | read-only | current | Description of how noise sensor values should be interpreted. |
| 1.3.6.1.4.1.3052.6.2.1.2.1.12 | ColumnesNumberAirflowSensors | read-only | current | The number of airflow sensors on the EventSensor. |
| 1.3.6.1.4.1.3052.6.2.1.2.1.13 | ColumnesAirflowReportingMode | read-only | current | Description of how airflow sensor values should be interpreted. |
| 1.3.6.1.4.1.3052.6.2.1.2.1.14 | ColumnesNumberAnalog | read-only | current | The number of analog inputs on the EventSensor. |
| 1.3.6.1.4.1.3052.6.2.1.2.1.15 | ColumnesAnalogReportingMode | read-only | current | Description of how analog input values should be interpreted. |
| 1.3.6.1.4.1.3052.6.2.1.2.1.16 | ColumnesNumberOutputs | read-only | current | The number of outputs (relay or power) on the EventSensor |
| 1.3.6.1.4.1.3052.6.2.1.2.1.17 | ColumnesOutputReportingMode | read-only | current | Description of how output values should be interpreted. |
| 1.3.6.1.4.1.3052.6.2.1.2.1.18 | ColumnesTempCombinedStatus | read-only | current | Combined status string intended to be parsed by NMS: name`value`scale`eventState`eventColorCode |
| 1.3.6.1.4.1.3052.6.2.1.2.1.19 | ColumnesCCCombinedStatusBlock1 | read-only | current | Combined status string intended to be parsed by NMS: numInBlock~name1`value1`eventColorCode1`alias1~name2`value2`eventColorCode2`alias2~...name8`value8`eventCo… |
| 1.3.6.1.4.1.3052.6.2.1.2.1.20 | ColumnesCCCombinedStatusBlock2 | read-only | current | Combined status string intended to be parsed by NMS: numInBlock~name9`value9`eventColorCode9`alias9~name10`value10`eventColorCode10`alias10~...name16`value16`e… |
| 1.3.6.1.4.1.3052.6.2.1.2.1.21 | ColumnesCCCombinedStatusBlock3 | read-only | current | Combined status string intended to be parsed by NMS: numInBlock~name17`value17`eventColorCode17`alias17~name18`value18`eventColorCode18`alias18~...name24`value… |
| 1.3.6.1.4.1.3052.6.2.1.2.1.22 | ColumnesCCCombinedStatusBlock4 | read-only | current | Combined status string intended to be parsed by NMS: numInBlock~name25`value25`eventColorCode25`alias25~name26`value26`eventColorCode26`alias26~...name32`value… |
| 1.3.6.1.4.1.3052.6.2.1.2.1.23 | ColumnesCCCombinedStatusBlock5 | read-only | current | Combined status string intended to be parsed by NMS: numInBlock~name33`value33`eventColorCode33`alias33~name34`value34`eventColorCode34`alias35~...name40`value… |
| 1.3.6.1.4.1.3052.6.2.1.2.1.24 | ColumnesCCCombinedStatusBlock6 | read-only | current | Combined status string intended to be parsed by NMS: numInBlock~name41`value41`eventColorCode41`alias41~name42`value42`eventColorCode42`alias43~...name48`value… |
| 1.3.6.1.4.1.3052.6.2.1.2.1.25 | ColumnesCCCombinedStatusBlock7 | read-only | current | Combined status string intended to be parsed by NMS: numInBlock~name49`value49`eventColorCode49`alias49~name50`value50`eventColorCode50`alias50~...name56`value… |
| 1.3.6.1.4.1.3052.6.2.1.2.1.26 | ColumnesCCCombinedStatusBlock8 | read-only | current | Combined status string intended to be parsed by NMS: numInBlock~name57`value57`eventColorCode57`alias57~name57`value57`eventColorCode564`alias57~...name64`valu… |
| 1.3.6.1.4.1.3052.6.2.1.2.1.27 | ColumnesHumidCombinedStatus | read-only | current | Combined status string intended to be parsed by NMS: name`value`eventState`eventColorCode |
| 1.3.6.1.4.1.3052.6.2.1.2.1.28 | ColumnesAnalogCombinedStatusBlock1 | read-only | current | Combined status string intended to be parsed by NMS: numInBlock~name1`value1`units1`eventState`eventColorCode1~name2`value2`units2`eventState`eventColorCode2~.… |
| 1.3.6.1.4.1.3052.6.2.1.2.1.29 | ColumnesAnalogCombinedStatusBlock2 | read-only | current | Combined status string intended to be parsed by NMS: numInBlock~name9`value9`units9`eventState9`eventColorCode9~... |
| 1.3.6.1.4.1.3052.6.2.1.2.1.30 | ColumnesAnalogCombinedStatusBlock3 | read-only | current | Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~... |
| 1.3.6.1.4.1.3052.6.2.1.2.1.31 | ColumnesAnalogCombinedStatusBlock4 | read-only | current | Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~... |
| 1.3.6.1.4.1.3052.6.2.1.2.1.32 | ColumnesAnalogCombinedStatusBlock5 | read-only | current | Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~... |
| 1.3.6.1.4.1.3052.6.2.1.2.1.33 | ColumnesAnalogCombinedStatusBlock6 | read-only | current | Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~... |
| 1.3.6.1.4.1.3052.6.2.1.2.1.34 | ColumnesOutputCombinedStatusBlock1 | read-only | current | Combined status string intended to be parsed by NMS: numInBlock~namex`valuex`unitsx`eventStatex`eventColorCodex~... |
| 1.3.6.1.4.1.3052.6.2.1.2.1.35 | ColumnesOutputCombinedStatusBlock2 | read-only | current | Combined status string intended to be parsed by NMS: numInBlock`namex`valuex`aliasx~namey`valuey`aliasy~...namez`valuez`aliasz |
| 1.3.6.1.4.1.3052.6.2.1.3 | ScalaresNewSensors | read-only | current | String representing the number of new (attached but unconfigured) EventSensors |
| 1.3.6.1.4.1.3052.6.3.1 | ScalarsiteName | read-only | current | Site Name string; Max 40 characters. |
| 1.3.6.1.4.1.3052.6.3.2 | ScalarthisProduct | read-only | current | This is a factory configured string for the product name. |
| 1.3.6.1.4.1.3052.6.3.3 | ScalarstockTrapString | read-only | current | The message defined for the event that triggers a trap. |
| 1.3.6.1.4.1.3052.6.3.4 | ScalartrapEventTypeNumber | read-only | current | The user-defined trap variable for the type of event that happened. Here are the definitions: 1 Data Alarm 2 CRDBFULL 3 NODATA 4 SCHEDULED 5 IPRCSOCKETDOWN 7 S… |
| 1.3.6.1.4.1.3052.6.3.5 | ScalartrapEventTypeName | read-only | current | The user-defined trap variable for the string corresponding to the event type. |
| 1.3.6.1.4.1.3052.6.3.6 | ScalartrapIncludedValue | read-only | current | The user-defined trap variable for the generic included value. |
| 1.3.6.1.4.1.3052.6.3.7 | ScalartrapIncludedString | read-only | current | The user-defined trap variable for the generic included string. |
| 1.3.6.1.4.1.3052.6.3.8 | ScalartrapTypeString | read-only | current | The cause of the trap, added for DL880 compatibility. |
| 1.3.6.1.4.1.3052.6.3.9 | ScalartrapEventClassNumber | read-only | current | The user-defined trap variable for the configurable class number associated with the triggering event. |
| 1.3.6.1.4.1.3052.6.3.10 | ScalartrapEventClassName | read-only | current | The user-defined trap variable for the configurable class name associated with the class number. |
| 1.3.6.1.4.1.3052.12.2.4.10.1.1 | ScalarpppDialEnable | read-write | current | ON/OFF PPP dialout enabled |
| 1.3.6.1.4.1.3052.12.2.4.10.1.2 | ScalarpppDialNumber | read-write | current | phone number to dial |
| 1.3.6.1.4.1.3052.12.2.4.10.1.5 | ScalarpppDialIdleTimeout | read-write | current | Seconds of inactivity after which the unit disconnects |
| 1.3.6.1.4.1.3052.12.2.4.10.1.6 | ScalarpppDialRetries | read-write | current | Number of dialing retries for PPP |
| 1.3.6.1.4.1.3052.12.2.4.10.1.7 | ScalarpppDialCDTimeout | read-write | current | Number of seconds to wait after dialing for CD before giving up |
| 1.3.6.1.4.1.3052.12.2.4.10.1.8 | ScalarpppDialLoginTimeout | read-write | current | Seconds to wait to negotiate PPP after connecting |
| 1.3.6.1.4.1.3052.12.2.4.10.1.9 | ScalarpppDialMdmInit | read-write | current | Modem init string to use when dialing PPP |
| 1.3.6.1.4.1.3052.12.2.4.10.1.10 | ScalarpppDialSuggestIP | read-write | current | IP address to suggest as the unit's end (local end) of the PPP link |
| 1.3.6.1.4.1.3052.12.2.4.10.1.11 | ScalarpppDialPlainLogin | read-write | current | ON/OFF look for login/password prompt before negotiating PPP |
| 1.3.6.1.4.1.3052.12.2.4.10.2.1 | ScalarpppHostEnable | read-write | current | ON/OFF Unit accepts PPP negotiation |
| 1.3.6.1.4.1.3052.12.2.4.10.2.2 | ScalarpppHostIdleTimeout | read-write | current | Seconds of inactivity after which PPP-hosted link will terminate |
| 1.3.6.1.4.1.3052.12.2.4.10.2.3 | ScalarpppHostLocalIP | read-write | current | Local IP address to negotiate |
| 1.3.6.1.4.1.3052.12.2.4.10.2.4 | ScalarpppHostRemoteIP | read-write | current | Remote IP address to hand out to PPP peer |
| 1.3.6.1.4.1.3052.12.2.4.15.1 | ScalarrouteTestEnable | read-write | current | ON/OFF enable route testing |
| 1.3.6.1.4.1.3052.12.2.4.15.2 | ScalarrouteTestPeriod | read-write | current | The period which a route is considered valid |
| 1.3.6.1.4.1.3052.12.2.4.15.3 | TablerouteTestAddressTable | not-accessible | current | Table of route testing addresses |
| 1.3.6.1.4.1.3052.12.2.4.15.3.1 | RowrouteTestAddressEntry | not-accessible | current | Entry for table of RTS files |
| 1.3.6.1.4.1.3052.12.2.4.15.3.1.1 | ColumnrouteTestAddressIndex | read-only | current | Index for table of RTS files |
| 1.3.6.1.4.1.3052.12.2.4.15.3.1.2 | ColumnrouteTestAddress | read-write | current | Address to ping to see if the route to it is valid |
| 1.3.6.1.4.1.3052.12.2.4.20.1 | ScalarethExpanIp | read-write | current | IPv4 address of the unit reachable by nodes on the network interface consisting of the Ethernet Expansion Card(s). If this is default (0.0.0.0), then each card… |
| 1.3.6.1.4.1.3052.12.2.4.20.2 | ScalarethExpanMask | read-write | current | IPv4 subnet mask for the Ethernet Expansion network interface. |
| 1.3.6.1.4.1.3052.12.2.4.20.3 | TableethExpanCardTable | not-accessible | current | Table of Ethernet Expansion cards |
| 1.3.6.1.4.1.3052.12.2.4.20.3.1 | RowethExpanCardEntry | not-accessible | current | Entry for table of Ethernet Expansion cards |
| 1.3.6.1.4.1.3052.12.2.4.20.3.1.1 | ColumnethExpanCardIndex | read-only | current | Index for table of Ethernet Expansion cards |
| 1.3.6.1.4.1.3052.12.2.4.20.3.1.2 | ColumnethExpanCardMAC | read-only | current | MAC address for each Ethernet Expansion Card that is bridged together to form the Ethernet Expansion network interface. |
| 1.3.6.1.4.1.3052.12.2.4.20.6.1 | ScalarethExpanDHCPStartIp | read-write | current | Starting IP address for serving DHCP addresses on the Ethernet Expansion network interface. If this is default (0.0.0.0) then the unit will not run DHCP to ser… |
| 1.3.6.1.4.1.3052.12.2.4.20.6.2 | ScalarethExpanDHCPLeaseTime | read-write | current | Lease time for Ethernet Expansion DHCP clients in minutes. |
| 1.3.6.1.4.1.3052.12.2.5.8.1 | ScalarmodemCLIDEnable | read-write | current | ON/OFF Calling Line Identification security |
| 1.3.6.1.4.1.3052.12.2.5.8.2 | TablemodemCLIDNumberTable | not-accessible | current | Table of authorized callers identified by phone number |
| 1.3.6.1.4.1.3052.12.2.5.8.2.1 | RowmodemCLIDNumberEntry | not-accessible | current | Entry for table of CLID numbers |
| 1.3.6.1.4.1.3052.12.2.5.8.2.1.1 | ColumnmodemCLIDNumberIndex | read-only | current | Index for table of CLID numbers |
| 1.3.6.1.4.1.3052.12.2.5.8.2.1.2 | ColumnmodemCLIDNumber | read-write | current | auhorized CLID number |
| 1.3.6.1.4.1.3052.12.2.12.2.1.1 | ScalarevdExitOnTrue | read-write | current | ON/OFF: Data alarm evaluator stops checking record against alarm equations when it finds an equation that matches |
| 1.3.6.1.4.1.3052.12.2.12.2.1.2 | ScalarevdFilterAction | read-write | current | What happens to a record that matches an equation: REJECT/ACCEPT |
| 1.3.6.1.4.1.3052.12.2.12.2.1.3 | ScalarevdWildCardChar | read-write | current | Character (in decimal ASCII code format) used to indicate wildcards in data alarm equation |
| 1.3.6.1.4.1.3052.12.2.12.2.2 | TableevdTable | not-accessible | current | Table of data events |
| 1.3.6.1.4.1.3052.12.2.12.2.2.1 | RowevdEntry | not-accessible | current | Entry for table of data events |
| 1.3.6.1.4.1.3052.12.2.12.2.2.1.1 | ColumnevdIndex | read-only | current | Index for table of data events |
| 1.3.6.1.4.1.3052.12.2.12.2.2.1.2 | ColumnevdEnable | read-write | current | ON/OFF enable this data event |
| 1.3.6.1.4.1.3052.12.2.12.2.2.1.3 | ColumnevdName | read-write | current | Name for this data event |
| 1.3.6.1.4.1.3052.12.2.12.2.2.1.4 | ColumnevdEquation | read-write | current | Equation for this data event |
| 1.3.6.1.4.1.3052.12.2.12.2.2.1.5 | ColumnevdThreshold | read-write | current | Number of equation matches that must happen to trigger this data event |
| 1.3.6.1.4.1.3052.12.2.12.2.2.1.6 | ColumnevdAutoClear | read-write | current | ON/OFF this data alarm is automatically cleared (re-armed) upon reaching the threshold number of matches |
| 1.3.6.1.4.1.3052.12.2.12.2.2.1.7 | ColumnevdClearInterval | read-write | current | Interval at which this alarm is automatically cleared (no bearing with evdAutoClear) |
| 1.3.6.1.4.1.3052.12.2.12.2.2.1.8 | ColumnevdClearTime | read-write | current | Tie of day (HH:MM) at which this data alarm is cleared (no bearing with evdAutoClear) |
| 1.3.6.1.4.1.3052.12.2.12.2.2.1.9 | ColumnevdActions | read-write | current | Actions for this data event |
| 1.3.6.1.4.1.3052.12.2.12.2.2.1.10 | ColumnevdClass | read-write | current | Class for this data event |
| 1.3.6.1.4.1.3052.12.2.12.2.2.1.11 | ColumnevdTrapNum | read-write | current | Trap number for this event |
| 1.3.6.1.4.1.3052.12.2.12.2.2.1.12 | ColumnevdMode | read-write | current | ALARM/FILTER: what is happens when this data event triggers: either generate actions (mode=ALARM) )or ACCEPT/REJECT (via evdFilterAction) the record (mode=FILT… |
| 1.3.6.1.4.1.3052.12.2.12.2.3 | TableevdFieldTable | not-accessible | current | Table of data event fields |
| 1.3.6.1.4.1.3052.12.2.12.2.3.1 | RowevdFieldEntry | not-accessible | current | Entry for table of data event fields |
| 1.3.6.1.4.1.3052.12.2.12.2.3.1.1 | ColumnevdFieldIndex | read-only | current | Index for table of data event fields |
| 1.3.6.1.4.1.3052.12.2.12.2.3.1.2 | ColumnevdFieldStart | read-write | current | Start position (1-based) for this data event field |
| 1.3.6.1.4.1.3052.12.2.12.2.3.1.3 | ColumnevdFieldLength | read-write | current | Number of characters this data event field occupies |
| 1.3.6.1.4.1.3052.12.2.12.2.3.1.4 | ColumnevdFieldName | read-write | current | Start position (1-based) for this data event field |
| 1.3.6.1.4.1.3052.12.2.12.2.3.1.5 | ColumnevdFieldLine | read-write | current | Line number (1-based, for multiline records) for this data event field |
| 1.3.6.1.4.1.3052.12.2.12.2.3.1.6 | ColumnevdFieldType | read-write | current | Alpha/Numeric type for this data event field |
| 1.3.6.1.4.1.3052.12.2.12.2.4 | TableevdMacroTable | not-accessible | current | Table of data event macros |
| 1.3.6.1.4.1.3052.12.2.12.2.4.1 | RowevdMacroEntry | not-accessible | current | Entry for table of data event macros |
| 1.3.6.1.4.1.3052.12.2.12.2.4.1.1 | ColumnevdMacroIndex | read-only | current | Index for table of data event macros |
| 1.3.6.1.4.1.3052.12.2.12.2.4.1.2 | ColumnevdMacroName | read-write | current | Name of this macro for use in data event equations |
| 1.3.6.1.4.1.3052.12.2.12.2.4.1.3 | ColumnevdMacroEquation | read-write | current | Equation for this data event macro |
| 1.3.6.1.4.1.3052.12.2.12.3.1 | ScalarevNoData1Enable | read-write | current | ON/OFF enable this no data event |
| 1.3.6.1.4.1.3052.12.2.12.3.2 | ScalarevNoData1Actions | read-write | current | Actions for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.3.3 | ScalarevNoData1Message | read-write | current | Message for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.3.4 | ScalarevNoData1TrapNum | read-write | current | Trap number for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.3.5 | ScalarevNoData1Class | read-write | current | Class for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.3.6 | ScalarevNoData1Sched1Begin | read-write | current | Schedule 1 begin time (HH:MM) for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.3.7 | ScalarevNoData1Sched1End | read-write | current | Schedule 1 end time (HH:MM) for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.3.8 | ScalarevNoData1Sched1Duration | read-write | current | Duration (minutes) for schedule 1 of this no data event |
| 1.3.6.1.4.1.3052.12.2.12.3.9 | ScalarevNoData1Sched2Begin | read-write | current | Schedule 2 begin time (HH:MM) for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.3.10 | ScalarevNoData1Sched2End | read-write | current | Schedule 2 end time (HH:MM) for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.3.11 | ScalarevNoData1Sched2Duration | read-write | current | Duration (minutes) for schedule 2 of this no data event |
| 1.3.6.1.4.1.3052.12.2.12.3.12 | TableevNoData1PortEnableTable | not-accessible | current | Table of no data event 1 port enables |
| 1.3.6.1.4.1.3052.12.2.12.3.12.1 | RowevNoData1PortEnableEntry | not-accessible | current | Entry for table of no data event 1 port enables |
| 1.3.6.1.4.1.3052.12.2.12.3.12.1.1 | ColumnevNoData1PortEnableIndex | read-only | current | Index for table of no data event 1 port enables |
| 1.3.6.1.4.1.3052.12.2.12.3.12.1.2 | ColumnevNoData1PortEnable | read-write | current | ON/OFF: no data event 1 observes this port |
| 1.3.6.1.4.1.3052.12.2.12.3.13 | ScalarevNoData1Exclusions | read-write | current | Exclusions (space-separated MM/DD-formatted dates) for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.3.14 | ScalarevNoData1Days | read-write | current | Days of the week on which this no event is active |
| 1.3.6.1.4.1.3052.12.2.12.4.1 | ScalarevNoData2Enable | read-write | current | ON/OFF enable this no data event |
| 1.3.6.1.4.1.3052.12.2.12.4.2 | ScalarevNoData2Actions | read-write | current | Actions for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.4.3 | ScalarevNoData2Message | read-write | current | Message for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.4.4 | ScalarevNoData2TrapNum | read-write | current | Trap number for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.4.5 | ScalarevNoData2Class | read-write | current | Class for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.4.6 | ScalarevNoData2Sched1Begin | read-write | current | Schedule 1 begin time (HH:MM) for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.4.7 | ScalarevNoData2Sched1End | read-write | current | Schedule 1 end time (HH:MM) for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.4.8 | ScalarevNoData2Sched1Duration | read-write | current | Duration (minutes) for schedule 1 of this no data event |
| 1.3.6.1.4.1.3052.12.2.12.4.9 | ScalarevNoData2Sched2Begin | read-write | current | Schedule 2 begin time (HH:MM) for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.4.10 | ScalarevNoData2Sched2End | read-write | current | Schedule 2 end time (HH:MM) for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.4.11 | ScalarevNoData2Sched2Duration | read-write | current | Duration (minutes) for schedule 2 of this no data event |
| 1.3.6.1.4.1.3052.12.2.12.4.12 | TableevNoData2PortEnableTable | not-accessible | current | Table of no data event 2 port enables |
| 1.3.6.1.4.1.3052.12.2.12.4.12.1 | RowevNoData2PortEnableEntry | not-accessible | current | Entry for table of no data event 2 port enables |
| 1.3.6.1.4.1.3052.12.2.12.4.12.1.1 | ColumnevNoData2PortEnableIndex | read-only | current | Index for table of no data event 2 port enables |
| 1.3.6.1.4.1.3052.12.2.12.4.12.1.2 | ColumnevNoData2PortEnable | read-write | current | ON/OFF: no data event 2 observes this port |
| 1.3.6.1.4.1.3052.12.2.12.4.13 | ScalarevNoData2Exclusions | read-write | current | Exclusions (space-separated MM/DD-formatted dates) for this no data event |
| 1.3.6.1.4.1.3052.12.2.12.4.14 | ScalarevNoData2Days | read-write | current | Days of the week on which this no event is active |
| 1.3.6.1.4.1.3052.12.2.16.15.1 | ScalarsysAMManufacturer | read-only | current | Device manufacturer |
| 1.3.6.1.4.1.3052.12.2.16.15.2 | ScalarsysAMProduct | read-only | current | Device product description (i.e., model or model number) |
| 1.3.6.1.4.1.3052.12.2.16.15.3 | ScalarsysAMSerialNumber | read-only | current | Manufacturer serial number for device |
| 1.3.6.1.4.1.3052.12.2.16.15.4 | ScalarsysAMHardwareOptions | read-only | current | Hardware options currently installed on device |
| 1.3.6.1.4.1.3052.12.2.16.15.5 | ScalarsysAMSoftwareVersion | read-only | current | Currently-running software version on device |
| 1.3.6.1.4.1.3052.12.2.16.15.6 | ScalarsysAMSiteName | read-write | current | Site Name of device (user definable, also known as the siteName object under the productIds branch. |
| 1.3.6.1.4.1.3052.17.2.4.13.2.1 | ScalarrtsAlarmsMode | read-write | current | RTS mode (OFF,LISTEN,PUSH) for alarms file |
| 1.3.6.1.4.1.3052.17.2.4.13.2.2 | ScalarrtsAlarmsShowAnswer | read-write | current | Show answer string upon RTS connect for alarms file |
| 1.3.6.1.4.1.3052.17.2.4.13.2.3 | ScalarrtsAlarmsReqXON | read-write | current | ON/OFF require XON to start flow for alarms file |
| 1.3.6.1.4.1.3052.17.2.4.13.2.4 | ScalarrtsAlarmsTimeout | read-write | current | Idle connection close timer (0 means no timeout) for alarms file |
| 1.3.6.1.4.1.3052.17.2.4.13.2.5 | ScalarrtsAlarmsEmptyClose | read-write | current | ON/OFF close the socket when this file is empty for alarms file |
| 1.3.6.1.4.1.3052.17.2.4.13.2.6 | ScalarrtsAlarmsPushHost | read-write | current | Host to which alarms file should be pushed via RTS |
| 1.3.6.1.4.1.3052.17.2.4.13.2.7 | ScalarrtsAlarmsPushPort | read-write | current | TCP port to which alarms file should be pushed via RTS |
| 1.3.6.1.4.1.3052.17.2.4.13.2.8 | ScalarrtsAlarmsPushRetryTimer | read-write | current | Retry timer (seconds) for retrying failed RTS push connect attempts |
| 1.3.6.1.4.1.3052.18.1.2.1 | TabledeStatusTable | not-accessible | current | Data Event Status Table |
| 1.3.6.1.4.1.3052.18.1.2.1.1 | RowdeStatusEntry | not-accessible | current | EventSensor status entry |
| 1.3.6.1.4.1.3052.18.1.2.1.1.1 | ColumndeStatusIndex | read-only | current | Index for Data Events |
| 1.3.6.1.4.1.3052.18.1.2.1.1.2 | ColumndeStatusName | read-only | current | Data Event name |
| 1.3.6.1.4.1.3052.18.1.2.1.1.3 | ColumndeStatusCounter | read-only | current | Number of times a data record has matched this event's equation. Range: 1-999999999 |
| 1.3.6.1.4.1.3052.18.1.2.1.1.4 | ColumndeStatusThreshold | read-only | current | Number of times the equation is matched before an event is triggered. Range: 1-999999999 |
| 1.3.6.1.4.1.3052.18.1.6.1 | TablefsStatusTable | not-accessible | current | Fuel sensor status table |
| 1.3.6.1.4.1.3052.18.1.6.1.1 | RowfsStatusEntry | not-accessible | current | Fuel sensor status table entry |
| 1.3.6.1.4.1.3052.18.1.6.1.1.1 | ColumnfsStatusIndex | read-only | current | Index for fuel sensors |
| 1.3.6.1.4.1.3052.18.1.6.1.1.2 | ColumnfsStatusName | read-only | current | Fuel sensor name |
| 1.3.6.1.4.1.3052.18.1.6.1.1.3 | ColumnfsStatusDeviceState | read-only | current | Fuel sensor device state |
| 1.3.6.1.4.1.3052.18.1.6.1.1.4 | ColumnfsStatusVolumeValueString | read-only | current | Fuel volume. Range is -2,147,483,648 to 2,147,483,647. This value reads -999 when the fuel sensor is disconnected |
| 1.3.6.1.4.1.3052.18.1.6.1.1.7 | ColumnfsStatusVolumePercentLevel | read-only | current | Height of the fluid in the tank expressed as a percentage of the tank height, in hundredths of a percent. |
| 1.3.6.1.4.1.3052.18.1.6.1.1.8 | ColumnfsStatusVolumeInEventState | read-only | current | Current event status of the fuel sensor. |
| 1.3.6.1.4.1.3052.18.1.6.1.1.9 | ColumnfsStatusCombined | read-only | current | Combined status string intended to be parsed by NMS: deviceState`deviceStateColorCode`percentRounded`valueAsFloat`volumeEventState`volumeEventStateColorCode`ca… |
| 1.3.6.1.4.1.3052.18.1.7.1 | ScalarwmsStatus | read-only | current | Wireless modem status |
| 1.3.6.1.4.1.3052.18.1.7.2 | ScalarwmsSignal | read-only | current | Wireless modem Signal strength |
| 1.3.6.1.4.1.3052.18.1.7.3 | ScalarwmsRSSI | read-only | current | Wireless modem Signal strength (RSSI) |
| 1.3.6.1.4.1.3052.18.1.7.4 | ScalarwmsBER | read-only | current | Wireless modem Bit Error Rate |
| 1.3.6.1.4.1.3052.18.1.7.5 | ScalarwmsUpdated | read-only | current | Wireless modem info last update time |
| 1.3.6.1.4.1.3052.18.1.7.6 | ScalarwmsRegistration | read-only | current | Wireless modem registration status |
| 1.3.6.1.4.1.3052.18.1.7.7 | ScalarwmsLAC | read-only | current | Wireless modem Location Area Code |
| 1.3.6.1.4.1.3052.18.1.7.8 | ScalarwmsCellID | read-only | current | Wireless modem Cell ID |
| 1.3.6.1.4.1.3052.18.1.7.9 | ScalarwmsIMSI | read-only | current | Wireless modem Internation Mobile Subscriber Identity number |
| 1.3.6.1.4.1.3052.18.1.7.10 | ScalarwmsPhnum | read-only | current | Wireless modem phone number |
| 1.3.6.1.4.1.3052.18.1.7.11 | ScalarwmsLocalIP | read-only | current | Local IP address of modem on wireless network |
| 1.3.6.1.4.1.3052.18.1.7.12 | ScalarwmsMgfID | read-only | current | Wireless modem manufacturer ID |
| 1.3.6.1.4.1.3052.18.1.7.13 | ScalarwmsModelID | read-only | current | Wireless modem model ID |
| 1.3.6.1.4.1.3052.18.1.7.14 | ScalarwmsIMEI | read-only | current | Wireless modem International Mobile Equipment Identity number |
| 1.3.6.1.4.1.3052.18.1.7.15 | ScalarwmsRevID | read-only | current | Wireless modem revision ID |
| 1.3.6.1.4.1.3052.18.1.7.16 | ScalarwmsNetName | read-only | current | Wireless modem network name |
| 1.3.6.1.4.1.3052.18.1.7.17 | ScalarwmsGPRSStatus | read-only | current | Wireless modem (E)GPRS status |
| 1.3.6.1.4.1.3052.18.1.7.18 | ScalarwmsBand | read-only | current | Wireless modem band |
| 1.3.6.1.4.1.3052.18.1.7.19 | ScalarwmsChannel | read-only | current | Wireless modem channel |
| 1.3.6.1.4.1.3052.18.1.7.20 | ScalarwmsCountryCode | read-only | current | Wireless modem country code |
| 1.3.6.1.4.1.3052.18.1.7.21 | ScalarwmsNetCode | read-only | current | Wireless modem network code |
| 1.3.6.1.4.1.3052.18.1.7.22 | ScalarwmsPLMNColor | read-only | current | Wireless modem PLMN color |
| 1.3.6.1.4.1.3052.18.1.7.23 | ScalarwmsBScolor | read-only | current | Wireless modem BS color |
| 1.3.6.1.4.1.3052.18.1.7.24 | ScalarwmsMpRACH | read-only | current | Wireless modem max power RACH |
| 1.3.6.1.4.1.3052.18.1.7.25 | ScalarwmsMinRxLevel | read-only | current | Wireless modem minimum receive level |
| 1.3.6.1.4.1.3052.18.1.7.26 | ScalarwmsBaseCoeff | read-only | current | Wireless modem base coefficient |
| 1.3.6.1.4.1.3052.18.1.7.27 | ScalarwmsSIMStatus | read-only | current | WWireless modem SIM status |
| 1.3.6.1.4.1.3052.18.1.7.28 | ScalarwmsICCID | read-only | current | Wireless modem SIM ICCID |
| 1.3.6.1.4.1.3052.18.1.7.29 | ScalarwmsModemType | read-only | current | Wireless modem type |
| 1.3.6.1.4.1.3052.18.1.8.1 | TableacpmStatusTable | not-accessible | current | AC power monitor status table |
| 1.3.6.1.4.1.3052.18.1.8.1.1 | RowacpmStatusEntry | not-accessible | current | AC power monitor status table entry |
| 1.3.6.1.4.1.3052.18.1.8.1.1.1 | ColumnacpmsIndex | read-only | current | Index for AC power monitors |
| 1.3.6.1.4.1.3052.18.1.8.1.1.2 | ColumnacpmsName | read-only | current | Name for the AC power monitor device. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.3 | ColumnacpmsAvgVoltageValueStr | read-only | current | Average voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1). This could be either the average of the phase voltages, or the sum… |
| 1.3.6.1.4.1.3052.18.1.8.1.1.4 | ColumnacpmsAvgVoltageMinStr | read-only | current | Minimum average voltage value since last reset, in volts. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.5 | ColumnacpmsAvgVoltageMaxStr | read-only | current | Maximum average voltage value since last reset, in volts. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.6 | ColumnacpmsAvgVoltageAvgStr | read-only | current | Average average voltage value since last reset, in volts. This is the unit's average of its measurements of the average voltage reported by the AC power monito… |
| 1.3.6.1.4.1.3052.18.1.8.1.1.7 | ColumnacpmsAvgVoltageInEventState | read-only | current | Event state of this AC power monitor voltage (Low, Normal, High, etc.). |
| 1.3.6.1.4.1.3052.18.1.8.1.1.8 | ColumnacpmsVoltagePhaseAValueStr | read-only | current | Phase A voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1). |
| 1.3.6.1.4.1.3052.18.1.8.1.1.9 | ColumnacpmsVoltagePhaseBValueStr | read-only | current | Phase B voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1). |
| 1.3.6.1.4.1.3052.18.1.8.1.1.10 | ColumnacpmsVoltagePhaseCValueStr | read-only | current | Phase C voltage, in volts. This is calculated using the formula (register * PT ratio * 0.1). |
| 1.3.6.1.4.1.3052.18.1.8.1.1.11 | ColumnacpmsAvgCurrentValueStr | read-only | current | Average current, in amps. This is calculated using the formula (register * CT ratio * 0.001). This could be either the average of the phase currents, or the su… |
| 1.3.6.1.4.1.3052.18.1.8.1.1.12 | ColumnacpmsAvgCurrentMinStr | read-only | current | Minimum average current value since last reset, in amps. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.13 | ColumnacpmsAvgCurrentMaxStr | read-only | current | Maximum average current value since last reset, in amps. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.14 | ColumnacpmsAvgCurrentAvgStr | read-only | current | Average average current value since last reset, in amps. This is the unit's average of its measurements of the average current reported by the AC power monitor… |
| 1.3.6.1.4.1.3052.18.1.8.1.1.15 | ColumnacpmsAvgCurrentInEventState | read-only | current | Event state of this AC power monitor current (Low, Normal, High, etc.). |
| 1.3.6.1.4.1.3052.18.1.8.1.1.16 | ColumnacpmsCurrentPhaseAValueStr | read-only | current | Phase A current, in amps. This is calculated using the formula (register * CT ratio * 0.001). |
| 1.3.6.1.4.1.3052.18.1.8.1.1.17 | ColumnacpmsCurrentPhaseBValueStr | read-only | current | Phase B current, in amps. This is calculated using the formula (register * CT ratio * 0.001). |
| 1.3.6.1.4.1.3052.18.1.8.1.1.18 | ColumnacpmsCurrentPhaseCValueStr | read-only | current | Phase C current, in amps. This is calculated using the formula (register * CT ratio * 0.001). |
| 1.3.6.1.4.1.3052.18.1.8.1.1.19 | ColumnacpmsAvgFreqValueStr | read-only | current | Frequency, in hertz. On the YD2010, this is calculated using the formula (register * 0.00106813). On the WattsOn, this is calculated using the formula (registe… |
| 1.3.6.1.4.1.3052.18.1.8.1.1.20 | ColumnacpmsAvgFreqMinStr | read-only | current | Minimum frequency value since last reset, in hertz. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.21 | ColumnacpmsAvgFreqMaxStr | read-only | current | Maximum frequency value since last reset, in hertz. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.22 | ColumnacpmsAvgFreqAvgStr | read-only | current | Average frequency value since last reset, in hertz. This is the unit's average of its measurements of the average frequency reported by the AC power monitor de… |
| 1.3.6.1.4.1.3052.18.1.8.1.1.23 | ColumnacpmsAvgFreqInEventState | read-only | current | Event state of this AC power monitor frequency (Low, Normal, High, etc.). |
| 1.3.6.1.4.1.3052.18.1.8.1.1.24 | ColumnacpmsTRPValueStr | read-only | current | Total real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range ta… |
| 1.3.6.1.4.1.3052.18.1.8.1.1.25 | ColumnacpmsTRPMinStr | read-only | current | Minimum total real power value since last reset, in watts. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.26 | ColumnacpmsTRPMaxStr | read-only | current | Maximum total real power value since last reset, in watts. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.27 | ColumnacpmsTRPAvgStr | read-only | current | Average total real power value since last reset, in watts. This is the unit's average of its measurements of the average total real power reported by the AC po… |
| 1.3.6.1.4.1.3052.18.1.8.1.1.28 | ColumnacpmsTRPInEventState | read-only | current | Event state of this AC power monitor total real power (Low, Normal, High, etc.). |
| 1.3.6.1.4.1.3052.18.1.8.1.1.29 | ColumnacpmsRPPhaseAValueStr | read-only | current | Phase A real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range … |
| 1.3.6.1.4.1.3052.18.1.8.1.1.30 | ColumnacpmsRPPhaseBValueStr | read-only | current | Phase B real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range … |
| 1.3.6.1.4.1.3052.18.1.8.1.1.31 | ColumnacpmsRPPhaseCValueStr | read-only | current | Phase C real power, in watts. On the YD2010, this is calculated using the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is the voltage range … |
| 1.3.6.1.4.1.3052.18.1.8.1.1.32 | ColumnacpmsCombined | read-only | current | Combined status string intended to be parsed by NMS: name`deviceState`deviceStateColorCode`voltage`current`frequency`power~voltageEventState`voltageColorCode`c… |
| 1.3.6.1.4.1.3052.18.1.8.1.1.33 | ColumnacpmsTPFValueStr | read-only | current | Total power factor. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.34 | ColumnacpmsTPFMinStr | read-only | current | Total power factor minimum value since last reset. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.35 | ColumnacpmsTPFMaxStr | read-only | current | Total power factor maximum value since last reset. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.36 | ColumnacpmsTPFAvgStr | read-only | current | Total power factor average value since last reset. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.37 | ColumnacpmsTPFInEventState | read-only | current | Total power factor event state. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.38 | ColumnacpmsPFPhaseAValueStr | read-only | current | Phase A power factor. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.39 | ColumnacpmsPFPhaseBValueStr | read-only | current | Phase B power factor. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.40 | ColumnacpmsPFPhaseCValueStr | read-only | current | Phase C power factor. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.41 | ColumnacpmsTRcPValueStr | read-only | current | Total reactive power, in VAR. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.42 | ColumnacpmsTRcPMinStr | read-only | current | Total reactive power minimum value since last reset, in VAR. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.43 | ColumnacpmsTRcPMaxStr | read-only | current | Total reactive power maximum value since last reset, in VAR. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.44 | ColumnacpmsTRcPAvgStr | read-only | current | Total reactive power average value since last reset, in VAR. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.45 | ColumnacpmsRcPPhaseAValueStr | read-only | current | Phase A reactive power, in VAR. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.46 | ColumnacpmsRcPPhaseBValueStr | read-only | current | Phase B reactive power, in VAR. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.47 | ColumnacpmsRcPPhaseCValueStr | read-only | current | Phase C reactive power, in VAR. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.48 | ColumnacpmsTAPValueStr | read-only | current | Total apparent power, in VA. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.49 | ColumnacpmsTAPMinStr | read-only | current | Total apparent power minimum value since last reset, in VA. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.50 | ColumnacpmsTAPMaxStr | read-only | current | Total apparent power maximum value since last reset, in VA. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.51 | ColumnacpmsTAPAvgStr | read-only | current | Total apparent power average value since last reset, in VA. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.52 | ColumnacpmsAPPhaseAValueStr | read-only | current | Phase A apparent power, in VA. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.53 | ColumnacpmsAPPhaseBValueStr | read-only | current | Phase B apparent power, in VA. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.54 | ColumnacpmsAPPhaseCValueStr | read-only | current | Phase C apparent power, in VA. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.55 | ColumnacpmsTotalEnergyWh | read-only | current | Total energy, in Wh. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.56 | ColumnacpmsTotalEnergyVAR | read-only | current | Total reactive energy, in VAR. |
| 1.3.6.1.4.1.3052.18.1.8.1.1.57 | ColumnacpmsTotalEnergyVA | read-only | current | Total apparent energy, in VA. |
| 1.3.6.1.4.1.3052.18.2.3.1 | ScalarnumberPorts | read-only | current | Number of RS-232 ports found. Range: 2 or 4 |
| 1.3.6.1.4.1.3052.18.2.3.2 | TableportConfigTable | not-accessible | current | Port config table |
| 1.3.6.1.4.1.3052.18.2.3.2.1 | RowportConfigEntry | not-accessible | current | Port config entry |
| 1.3.6.1.4.1.3052.18.2.3.2.1.1 | ColumnportConfigIndex | read-only | current | Index for ports |
| 1.3.6.1.4.1.3052.18.2.3.2.1.2 | ColumnportConfigBaud | read-write | current | Baud rate, 19200, 9600, etc. |
| 1.3.6.1.4.1.3052.18.2.3.2.1.3 | ColumnportConfigDataFormat | read-write | current | Value representing word length, parity, and stop bits: 0=8N1, 1=7E1, 2=7O1, 3=7N1, 4=8O2 |
| 1.3.6.1.4.1.3052.18.2.3.2.1.4 | ColumnportConfigStripPtOutputLfs | read-write | current | Strip passthrough LFs sent to device on this port: 1=yes, 0=no. |
| 1.3.6.1.4.1.3052.18.2.3.2.1.5 | ColumnportConfigStripPtInputLfs | read-write | current | Strip passthrough LFs received from device on this port: 1=yes, 0=no. |
| 1.3.6.1.4.1.3052.18.2.3.2.1.7 | ColumnportConfigMaskEnable | read-write | current | 1=Use the character mask on this port. 0=Do not use the mask. When the mask is enabled, the following ASCII characters are ignored on the port: 0, 1, 4-9, 11, … |
| 1.3.6.1.4.1.3052.18.2.3.2.1.8 | ColumnportConfigDAEnable | read-write | current | 1=Enable the Data Alarm Evaluator for data on this port. 0=Do not evaluate data on this port. |
| 1.3.6.1.4.1.3052.18.2.3.2.1.9 | ColumnportConfigStoreAlarmsDPT | read-write | current | ON/OFF: store alarms received during passthrough |
| 1.3.6.1.4.1.3052.18.2.3.2.1.10 | ColumnportConfigRecordTimeout | read-write | current | Timeout after last unterminated data received upon which data collected so far is stored as a record. |
| 1.3.6.1.4.1.3052.18.2.3.2.1.11 | ColumnportConfigDataType | read-write | current | How the port interprets incoming data: ASCII/BINARY |
| 1.3.6.1.4.1.3052.18.2.3.2.1.12 | ColumnportConfigEtxToCRLF | read-write | current | ON/OFF whether the port translates incoming ETX to CRLF |
| 1.3.6.1.4.1.3052.18.2.3.2.1.13 | ColumnportConfigMLREnable | read-write | current | ON/OFF Whether Multiline Records are collected on this port. |
| 1.3.6.1.4.1.3052.18.2.3.2.1.14 | ColumnportConfigMLRStartField1Pos | read-write | current | Position of MLR start field 1 |
| 1.3.6.1.4.1.3052.18.2.3.2.1.15 | ColumnportConfigMLRStartField1Text | read-write | current | Text to match MLR start field 1 |
| 1.3.6.1.4.1.3052.18.2.3.2.1.16 | ColumnportConfigMLRStartField2Pos | read-write | current | Position of MLR start field 2 |
| 1.3.6.1.4.1.3052.18.2.3.2.1.17 | ColumnportConfigMLRStartField2Text | read-write | current | Text to match MLR start field 2 |
| 1.3.6.1.4.1.3052.18.2.3.2.1.18 | ColumnportConfigMLRNumLinesBefore | read-write | current | Number of lines before the starting line which should be included in the MLR |
| 1.3.6.1.4.1.3052.18.2.3.2.1.19 | ColumnportConfigMLREndDetection | read-write | current | How the MLR parser determines what ends an MLR: by FORMULA, number of lines received so far (COUNT), or number of blank lines received so far (BLANKS) |
| 1.3.6.1.4.1.3052.18.2.3.2.1.20 | ColumnportConfigMLRLineCount | read-write | current | Number of lines in the MLR (used by the end detection mode) |
| 1.3.6.1.4.1.3052.18.2.3.2.1.21 | ColumnportConfigMLREndField1Pos | read-write | current | Position of MLR end field 1 |
| 1.3.6.1.4.1.3052.18.2.3.2.1.22 | ColumnportConfigMLREndField1Text | read-write | current | Text to match MLR end field 1 |
| 1.3.6.1.4.1.3052.18.2.3.2.1.23 | ColumnportConfigMLREndField2Pos | read-write | current | Position of MLR end field 2 |
| 1.3.6.1.4.1.3052.18.2.3.2.1.24 | ColumnportConfigMLREndField2Text | read-write | current | Text to match MLR end field 2 |
| 1.3.6.1.4.1.3052.18.2.3.2.1.25 | ColumnportConfigMLRUseComplexRules | read-write | current | ON/OFF MLR parser uses complex rules (field possitions/ formulas, etc.) |
| 1.3.6.1.4.1.3052.18.2.3.2.1.26 | ColumnportConfigBufferPT | read-write | current | ON/OFF records received during passthrough mode are buffered/stored in the database |
| 1.3.6.1.4.1.3052.18.2.3.2.1.27 | ColumnportConfigId | read-write | current | The text identifer for the port |
| 1.3.6.1.4.1.3052.18.2.3.2.1.28 | ColumnportConfigMode | read-write | current | Mode of the serial port. |
| 1.3.6.1.4.1.3052.18.2.3.2.1.29 | ColumnportConfigHsk | read-write | current | Handshaking mode of the serial port. |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.1 | Scalareth1Mode | read-only | current | Mode of the Ethernet1 interface: STATIC,DHCP,VLAN |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.2 | Scalareth1Address | read-write | current | Ethernet1 IP address |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.3 | Scalareth1SubnetMask | read-write | current | Ethernet1 subnet mask |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.4 | Scalareth1Router | read-write | current | Ethernet1 router |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.1.1 | Scalareth1VLAN1ID | read-write | current | Ethernet1 VLAN1 ID |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.1.2 | Scalareth1VLAN1Priority | read-write | current | Ethernet1 VLAN1 priority |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.1.3 | Scalareth1VLAN1Address | read-write | current | Ethernet1 VLAN1 IP address |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.1.4 | Scalareth1VLAN1SubnetMask | read-write | current | Ethernet1 VLAN1 subnet mask |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.1.5 | Scalareth1VLAN1Router | read-write | current | Ethernet1 VLAN1 router |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.2.1 | Scalareth1VLAN2ID | read-write | current | Ethernet1 VLAN2 ID |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.2.2 | Scalareth1VLAN2Priority | read-write | current | Ethernet1 VLAN2 priority |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.2.3 | Scalareth1VLAN2Address | read-write | current | Ethernet1 VLAN2 IP address |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.2.4 | Scalareth1VLAN2SubnetMask | read-write | current | Ethernet1 VLAN2 subnet mask |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.2.5 | Scalareth1VLAN2Router | read-write | current | Ethernet1 VLAN2 router |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.3.1 | Scalareth1VLAN3ID | read-write | current | Ethernet1 VLAN3 ID |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.3.2 | Scalareth1VLAN3Priority | read-write | current | Ethernet1 VLAN3 priority |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.3.3 | Scalareth1VLAN3Address | read-write | current | Ethernet1 VLAN3 IP address |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.3.4 | Scalareth1VLAN3SubnetMask | read-write | current | Ethernet1 VLAN3 subnet mask |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.3.5 | Scalareth1VLAN3Router | read-write | current | Ethernet1 VLAN3 router |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.4.1 | Scalareth1VLAN4ID | read-write | current | Ethernet1 VLAN4 ID |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.4.2 | Scalareth1VLAN4Priority | read-write | current | Ethernet1 VLAN4 priority |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.4.3 | Scalareth1VLAN4Address | read-write | current | Ethernet1 VLAN4 IP address |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.4.4 | Scalareth1VLAN4SubnetMask | read-write | current | Ethernet1 VLAN4 subnet mask |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.4.5 | Scalareth1VLAN4Router | read-write | current | Ethernet1 VLAN4 router |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.5.1 | Scalareth1VLAN5ID | read-write | current | Ethernet1 VLAN5 ID |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.5.2 | Scalareth1VLAN5Priority | read-write | current | Ethernet1 VLAN5 priority |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.5.3 | Scalareth1VLAN5Address | read-write | current | Ethernet1 VLAN5 IP address |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.5.4 | Scalareth1VLAN5SubnetMask | read-write | current | Ethernet1 VLAN5 subnet mask |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.5.5 | Scalareth1VLAN5Router | read-write | current | Ethernet1 VLAN5 router |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.6.1 | Scalareth1VLAN6ID | read-write | current | Ethernet1 VLAN6 ID |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.6.2 | Scalareth1VLAN6Priority | read-write | current | Ethernet1 VLAN6 priority |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.6.3 | Scalareth1VLAN6Address | read-write | current | Ethernet1 VLAN6 IP address |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.6.4 | Scalareth1VLAN6SubnetMask | read-write | current | Ethernet1 VLAN6 subnet mask |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.5.6.5 | Scalareth1VLAN6Router | read-write | current | Ethernet1 VLAN6 router |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.6 | Scalareth1MAC | read-only | current | Ethernet1 MAC |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.7.1 | Scalareth1IPv6Mode | read-write | current | Controls IPv6 operation for this Ethernet interface. |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.7.2.1 | Scalareth1IPv6StaticAddress | read-write | current | he static IPv6 address to use for this interface when in operating in STATIC mode. |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.7.2.2 | Scalareth1IPv6StaticRouter | read-write | current | The IPv6 router to engage as the default router when this interface operates in STATIC mode. |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.7.3.1 | Scalareth1IPv6AutoAddress1 | read-only | current | One of the automatically-acquired IPv6 addresses. |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.7.3.2 | Scalareth1IPv6AutoAddress2 | read-only | current | One of the automatically-acquired IPv6 addresses. |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.7.3.3 | Scalareth1IPv6AutoAddress3 | read-only | current | One of the automatically-acquired IPv6 addresses. |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.7.3.4 | Scalareth1IPv6AutoAddress4 | read-only | current | One of the automatically-acquired IPv6 addresses. |
| 1.3.6.1.4.1.3052.18.2.4.1.1.1.7.4 | Scalareth1LinkLocalAddress | read-only | current | The link local IPv6 address for this interface. This is present when the IPv6 mode is not OFF. |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.1 | Scalareth2Mode | read-only | current | Mode of the Ethernet2 interface: STATIC,DHCP,VLAN |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.2 | Scalareth2Address | read-write | current | Ethernet2 IP address |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.3 | Scalareth2SubnetMask | read-write | current | Ethernet2 subnet mask |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.4 | Scalareth2Router | read-write | current | Ethernet2 router |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.1.1 | Scalareth2VLAN1ID | read-write | current | Ethernet2 VLAN1 ID |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.1.2 | Scalareth2VLAN1Priority | read-write | current | Ethernet2 VLAN1 priority |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.1.3 | Scalareth2VLAN1Address | read-write | current | Ethernet2 VLAN1 IP address |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.1.4 | Scalareth2VLAN1SubnetMask | read-write | current | Ethernet2 VLAN1 subnet mask |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.1.5 | Scalareth2VLAN1Router | read-write | current | Ethernet2 VLAN1 router |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.2.1 | Scalareth2VLAN2ID | read-write | current | Ethernet2 VLAN2 ID |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.2.2 | Scalareth2VLAN2Priority | read-write | current | Ethernet2 VLAN2 priority |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.2.3 | Scalareth2VLAN2Address | read-write | current | Ethernet2 VLAN2 IP address |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.2.4 | Scalareth2VLAN2SubnetMask | read-write | current | Ethernet2 VLAN2 subnet mask |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.2.5 | Scalareth2VLAN2Router | read-write | current | Ethernet2 VLAN2 router |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.3.1 | Scalareth2VLAN3ID | read-write | current | Ethernet2 VLAN3 ID |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.3.2 | Scalareth2VLAN3Priority | read-write | current | Ethernet2 VLAN3 priority |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.3.3 | Scalareth2VLAN3Address | read-write | current | Ethernet2 VLAN3 IP address |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.3.4 | Scalareth2VLAN3SubnetMask | read-write | current | Ethernet2 VLAN3 subnet mask |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.3.5 | Scalareth2VLAN3Router | read-write | current | Ethernet2 VLAN3 router |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.4.1 | Scalareth2VLAN4ID | read-write | current | Ethernet2 VLAN4 ID |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.4.2 | Scalareth2VLAN4Priority | read-write | current | Ethernet2 VLAN4 priority |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.4.3 | Scalareth2VLAN4Address | read-write | current | Ethernet2 VLAN4 IP address |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.4.4 | Scalareth2VLAN4SubnetMask | read-write | current | Ethernet2 VLAN4 subnet mask |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.4.5 | Scalareth2VLAN4Router | read-write | current | Ethernet2 VLAN4 router |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.5.1 | Scalareth2VLAN5ID | read-write | current | Ethernet2 VLAN5 ID |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.5.2 | Scalareth2VLAN5Priority | read-write | current | Ethernet2 VLAN5 priority |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.5.3 | Scalareth2VLAN5Address | read-write | current | Ethernet2 VLAN5 IP address |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.5.4 | Scalareth2VLAN5SubnetMask | read-write | current | Ethernet2 VLAN5 subnet mask |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.5.5 | Scalareth2VLAN5Router | read-write | current | Ethernet2 VLAN5 router |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.6.1 | Scalareth2VLAN6ID | read-write | current | Ethernet2 VLAN6 ID |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.6.2 | Scalareth2VLAN6Priority | read-write | current | Ethernet2 VLAN6 priority |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.6.3 | Scalareth2VLAN6Address | read-write | current | Ethernet2 VLAN6 IP address |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.6.4 | Scalareth2VLAN6SubnetMask | read-write | current | Ethernet2 VLAN6 subnet mask |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.5.6.5 | Scalareth2VLAN6Router | read-write | current | Ethernet2 VLAN6 router |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.6 | Scalareth2MAC | read-only | current | Ethernet2 MAC |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.7.1 | Scalareth2IPv6Mode | read-write | current | Controls IPv6 operation for this Ethernet interface. |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.7.2.1 | Scalareth2IPv6StaticAddress | read-write | current | he static IPv6 address to use for this interface when in operating in STATIC mode. |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.7.2.2 | Scalareth2IPv6StaticRouter | read-write | current | The IPv6 router to engage as the default router when this interface operates in STATIC mode. |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.7.3.1 | Scalareth2IPv6AutoAddress1 | read-only | current | One of the automatically-acquired IPv6 addresses. |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.7.3.2 | Scalareth2IPv6AutoAddress2 | read-only | current | One of the automatically-acquired IPv6 addresses. |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.7.3.3 | Scalareth2IPv6AutoAddress3 | read-only | current | One of the automatically-acquired IPv6 addresses. |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.7.3.4 | Scalareth2IPv6AutoAddress4 | read-only | current | One of the automatically-acquired IPv6 addresses. |
| 1.3.6.1.4.1.3052.18.2.4.1.1.2.7.4 | Scalareth2LinkLocalAddress | read-only | current | The link local IPv6 address for this interface. This is present when the IPv6 mode is not OFF. |
| 1.3.6.1.4.1.3052.18.2.4.8.7.1 | ScalarsnmpNtfnAttempts | read-write | current | Maximum of times the unit attempts to send a notification (trap/inform) in 1 cycle |
| 1.3.6.1.4.1.3052.18.2.4.8.7.2 | ScalarsnmpNtfnTimeout | read-write | current | Number of seconds between retries of sending a notification |
| 1.3.6.1.4.1.3052.18.2.4.8.7.3 | ScalarsnmpNtfnCycles | read-write | current | Number of times the unit attempts a group of attempts to send a notification (a cycle) |
| 1.3.6.1.4.1.3052.18.2.4.8.7.4 | ScalarsnmpNtfnSnooze | read-write | current | Minutes between cycles |
| 1.3.6.1.4.1.3052.18.2.4.9.1 | ScalarftpPushEnable | read-write | current | Enable FTP push for REGULAR (protocol: FTP) or SECURE (protocol: SFTP) operation, or disable it (OFF) |
| 1.3.6.1.4.1.3052.18.2.4.9.2 | ScalarftpPushServer | read-write | current | FTP server to which data should be pushed |
| 1.3.6.1.4.1.3052.18.2.4.9.5 | ScalarftpPushAccount | read-write | current | FTP push account |
| 1.3.6.1.4.1.3052.18.2.4.9.6 | ScalarftpPushDirectory | read-write | current | FTP push directory |
| 1.3.6.1.4.1.3052.18.2.4.9.7 | ScalarftpPushperiod | read-write | current | Minutes between pushes |
| 1.3.6.1.4.1.3052.18.2.4.9.8 | TableftpPushPushFileTable | not-accessible | current | Table of files to push |
| 1.3.6.1.4.1.3052.18.2.4.9.8.1 | RowftpPushPushFileEntry | not-accessible | current | Entry for table of files to push |
| 1.3.6.1.4.1.3052.18.2.4.9.8.1.1 | ColumnftpPushPushFileIndex | read-only | current | Index for table of files to push |
| 1.3.6.1.4.1.3052.18.2.4.9.8.1.2 | ColumnftpPushPushFile | read-write | current | ON/OFF push this local FILEx |
| 1.3.6.1.4.1.3052.18.2.4.9.9 | ScalarftpPushPushAudit | read-write | current | ON/OFF push the audit log |
| 1.3.6.1.4.1.3052.18.2.4.9.10 | ScalarftpPushPushAlarms | read-write | current | ON/OFF push the alarms/events file |
| 1.3.6.1.4.1.3052.18.2.4.9.11 | TableftpPushRemoteFileTable | not-accessible | current | Table of remote names of files to push |
| 1.3.6.1.4.1.3052.18.2.4.9.11.1 | RowftpPushRemoteFileEntry | not-accessible | current | Entry for table of remote names of files to push |
| 1.3.6.1.4.1.3052.18.2.4.9.11.1.1 | ColumnftpPushRemoteFileIndex | read-only | current | Index for table of remote names of files to push |
| 1.3.6.1.4.1.3052.18.2.4.9.11.1.2 | ColumnftpPushRemoteFileName | read-write | current | remote name of pushed FILEx (name on server) |
| 1.3.6.1.4.1.3052.18.2.4.9.12 | ScalarftpPushRemoteAlarmName | read-write | current | Filename on server for alarms |
| 1.3.6.1.4.1.3052.18.2.4.9.13 | ScalarftpPushPassive | read-write | current | ON/OFF use ftp passive mode |
| 1.3.6.1.4.1.3052.18.2.4.9.14 | ScalarftpPushIncludeDate | read-write | current | ON/OFF include the date in the name of the pushed file |
| 1.3.6.1.4.1.3052.18.2.4.9.15 | ScalarftpPushIncludeTime | read-write | current | ON/OFF include the time in the name of the pushed file |
| 1.3.6.1.4.1.3052.18.2.4.9.16 | ScalarftpPushIncludeSeq | read-write | current | ON/OFF include a sequence number in the name of the pushed file |
| 1.3.6.1.4.1.3052.18.2.4.12.1.1 | TableipRestrictionTable | not-accessible | current | Table of IP restrictions |
| 1.3.6.1.4.1.3052.18.2.4.12.1.1.1 | RowipRestrictionEntry | not-accessible | current | Entry for table of IP restrictions |
| 1.3.6.1.4.1.3052.18.2.4.12.1.1.1.1 | ColumnipRestrictionIndex | read-only | current | Index for table of IP restrictions |
| 1.3.6.1.4.1.3052.18.2.4.12.1.1.1.2 | ColumnipRestrictionEnable | read-write | current | ON/OFF enable this IP restriction |
| 1.3.6.1.4.1.3052.18.2.4.12.1.1.1.3 | ColumnipRestrictionMask | read-write | current | IP restriction mask |
| 1.3.6.1.4.1.3052.18.2.4.14.1.1 | ScalartrapIncludeDateTime | read-write | current | ON/OFF include date and time in stock trap message |
| 1.3.6.1.4.1.3052.18.2.4.14.1.2 | ScalartrapIncludeSiteName | read-write | current | ON/OFF include site name in stock trap message |
| 1.3.6.1.4.1.3052.18.2.4.14.1.3 | ScalartrapIncludeSensorID | read-write | current | ON/OFF include sensor ID in stock trap message |
| 1.3.6.1.4.1.3052.18.2.4.14.1.4 | ScalartrapIncludeUDName | read-write | current | ON/OFF include user defined name in stock trap message |
| 1.3.6.1.4.1.3052.18.2.4.14.1.5 | ScalartrapIncludeUDState | read-write | current | ON/OFF include user defined state in stock trap message |
| 1.3.6.1.4.1.3052.18.2.4.14.1.6 | ScalartrapIncludeSourceAddress | read-write | current | ON/OFF include source IP address in stock trap message |
| 1.3.6.1.4.1.3052.18.2.4.16.20.1 | ScalarwirelessConnEnable | read-write | current | Enable wireless modem connectivity check. |
| 1.3.6.1.4.1.3052.18.2.4.16.20.2 | ScalarwirelessConnCheckInterval | read-write | current | Wireless connectivity check interval in minutes. |
| 1.3.6.1.4.1.3052.18.2.4.16.20.3 | ScalarwirelessConnFailThreshold | read-write | current | Wireless connectivity fail threshold. |
| 1.3.6.1.4.1.3052.18.2.4.16.20.10 | ScalarwirelessConnIP1 | read-write | current | Wireless connectivity check IP address 1. |
| 1.3.6.1.4.1.3052.18.2.4.16.20.11 | ScalarwirelessConnIP2 | read-write | current | Wireless connectivity check IP address 2. |
| 1.3.6.1.4.1.3052.18.2.4.18.1 | ScalararpFilter | read-write | current | ARP filter code |
| 1.3.6.1.4.1.3052.18.2.11.1.1 | ScalarscShowPasswordPrompt | read-write | current | ON/OFF show password prompt upon login |
| 1.3.6.1.4.1.3052.18.2.11.1.2 | ScalarscConsoleLoginRequired | read-write | current | ON/OFF login required upon connecting via console |
| 1.3.6.1.4.1.3052.18.2.11.1.3 | ScalarscModemLoginRequired | read-write | current | ON/OFF login required upon connecting via modem |
| 1.3.6.1.4.1.3052.18.2.11.1.4 | ScalarscTelnetLoginRequired | read-write | current | ON/OFF login required upon connecting via Telnet |
| 1.3.6.1.4.1.3052.18.2.11.1.5 | ScalarscTelnetPTLoginRequired | read-write | current | ON/OFF login required upon connecting via Telnet to pass- through ports (TCP ports 210x) |
| 1.3.6.1.4.1.3052.18.2.11.1.6 | ScalarscRTSLoginRequired | read-write | current | ON/OFF login required upon connecting to RTS (TCP ports 220x) |
| 1.3.6.1.4.1.3052.18.2.11.1.7 | ScalarscAuthMode | read-write | current | Authentication mode (USERNAME/PW,PW/USERNAME,PASSWORD ONLY) |
| 1.3.6.1.4.1.3052.18.2.11.1.8 | ScalarscRightsGroup | read-write | current | The set of aliases used for the 8 available rights levels |
| 1.3.6.1.4.1.3052.18.2.11.1.9 | ScalarscSecret | read-write | current | Shared secret for challenges |
| 1.3.6.1.4.1.3052.18.2.11.2 | TablesecUserTable | not-accessible | current | Table of users |
| 1.3.6.1.4.1.3052.18.2.11.2.1 | RowsecUserEntry | not-accessible | current | Entry for table of users |
| 1.3.6.1.4.1.3052.18.2.11.2.1.1 | ColumnsecUserIndex | read-only | current | Index for table of users |
| 1.3.6.1.4.1.3052.18.2.11.2.1.2 | ColumnsecUserEnable | read-write | current | ON/OFF enable user |
| 1.3.6.1.4.1.3052.18.2.11.2.1.5 | ColumnsecUserConnectVia | read-write | current | Methods by which user is allowed to connect: L=local (console) T=Telnet M=modem F=FTP R=RTS S=SSH |
| 1.3.6.1.4.1.3052.18.2.11.2.1.6 | ColumnsecUserLoginTo | read-write | current | The function presented to the user upon login (COMMAND, PASSTHROUGH,MENU) |
| 1.3.6.1.4.1.3052.18.2.11.2.1.7 | ColumnsecUserAccessFile | read-write | current | The default access file associated with the user |
| 1.3.6.1.4.1.3052.18.2.11.2.1.9 | ColumnsecUserPTEscapeTo | read-write | current | The function presented to the user upon escaping pass- through: currently only MENU |
| 1.3.6.1.4.1.3052.18.2.11.2.1.10 | ColumnsecUserPPPType | read-write | current | The kind of PPP access allowed to this user cannot connect via PPP (NONE), can connect but only to the unit (LOCAL), or can connect and route to Ethernet (ROUT… |
| 1.3.6.1.4.1.3052.18.2.11.2.1.11 | ColumnsecUserRights | read-write | current | The rights level granted to this user |
| 1.3.6.1.4.1.3052.18.2.11.2.1.13 | ColumnsecUserEventsReadAccess | read-write | current | DENY/ALLOW user to read the events/alarms file |
| 1.3.6.1.4.1.3052.18.2.11.2.1.14 | ColumnsecUserAuditReadAccess | read-write | current | DENY/ALLOW user to read the audit log |
| 1.3.6.1.4.1.3052.18.2.11.2.1.16 | ColumnsecUserEventsWriteAccess | read-write | current | DENY/ALLOW user to delete the events file |
| 1.3.6.1.4.1.3052.18.2.11.2.1.17 | ColumnsecUserAuditWriteAccess | read-write | current | DENY/ALLOW user to write to the audit log |
| 1.3.6.1.4.1.3052.18.2.11.2.1.18 | ColumnsecUserExpiration | read-write | current | Expiration date/time of this user |
| 1.3.6.1.4.1.3052.18.2.11.2.1.19 | ColumnsecUserCallbackNumber1 | read-write | current | Number slot 1 the unit calls for dialback |
| 1.3.6.1.4.1.3052.18.2.11.2.1.20 | ColumnsecUserCallbackNumber2 | read-write | current | Number slot 2 the unit calls for dialback |
| 1.3.6.1.4.1.3052.18.2.11.2.1.21 | ColumnsecUserCallbackNumber3 | read-write | current | Number slot 3 the unit calls for dialback |
| 1.3.6.1.4.1.3052.18.2.11.2.1.22 | ColumnsecUserChallengeTelnetMode | read-write | current | Telnet challenge mode: when user logs in via telnet, unit allows access (OFF), presents a challenge (CHALLENGE), or unit sends a one-time-password (SEND PASSWO… |
| 1.3.6.1.4.1.3052.18.2.11.2.1.23 | ColumnsecUserChallengeModemMode | read-write | current | Modem challenge mode: when user logs in via modem, unit allows access (OFF), presents a challenge (CHALLENGE), sends a one-time-password (SEND PASSWORD) to a d… |
| 1.3.6.1.4.1.3052.18.2.11.2.1.24 | ColumnsecUserChallengeConsoleMode | read-write | current | Console challenge mode: when user logs in via console, unit allows access (OFF), or presents a challenge (CHALLENGE) |
| 1.3.6.1.4.1.3052.18.2.11.2.1.25 | ColumnsecUserChallengeTelnetSendTo | read-write | current | Email action used as the destination address for one-time- password when a user logs in with a challenge mode of SEND PASSWORD |
| 1.3.6.1.4.1.3052.18.2.11.2.1.26 | ColumnsecUserChallengeModemSendTo | read-write | current | Modem action used as the destination phone number for one- time-password when a user logs in with a challenge mode of SEND PASSWORD |
| 1.3.6.1.4.1.3052.18.2.11.2.1.27 | ColumnsecUserChallengeExpiration | read-write | current | Time (in minutes) after which a one-time-password is sent that it can be used to log in |
| 1.3.6.1.4.1.3052.18.2.11.3.1 | ScalarsfEnable | read-write | current | ON/OFF enable factory access |
| 1.3.6.1.4.1.3052.18.2.11.3.2 | ScalarsfSecret | read-write | current | Secret used for factory access |
| 1.3.6.1.4.1.3052.18.2.12.1.1 | TableevClassNameTable | not-accessible | current | Table of classes |
| 1.3.6.1.4.1.3052.18.2.12.1.1.1 | RowevClassNameEntry | not-accessible | current | Entry for table of classes |
| 1.3.6.1.4.1.3052.18.2.12.1.1.1.1 | ColumnevClassNameIndex | read-only | current | Index for table of classes |
| 1.3.6.1.4.1.3052.18.2.12.1.1.1.2 | ColumnevClassName | read-write | current | Class name for this slot |
| 1.3.6.1.4.1.3052.18.2.12.1.2 | ScalarevReminderInterval | read-write | current | Interval (minutes) between EventSensor reminder events |
| 1.3.6.1.4.1.3052.18.2.12.1.3.1 | ScalarevLogEnable | read-write | current | ON/OFF enable event log |
| 1.3.6.1.4.1.3052.18.2.12.1.3.2 | ScalarevLogStoreAlarm | read-write | current | ON/OFF store data alarms in event log |
| 1.3.6.1.4.1.3052.18.2.12.1.3.3 | ScalarevLogMaxSize | read-write | current | max size (in KB) of event log |
| 1.3.6.1.4.1.3052.18.2.12.1.3.4 | ScalarevLogStoreSensor | read-write | current | ON/OFF store EventSensor events in event log |
| 1.3.6.1.4.1.3052.18.2.12.1.3.5 | ScalarevLogTimeStampAlarms | read-write | current | ON/OFF put timestamps on event log entries |
| 1.3.6.1.4.1.3052.18.2.12.1.3.6 | ScalarevLogPrependName | read-write | current | ON/OFF prepend data event name to data alarm records in event log |
| 1.3.6.1.4.1.3052.18.2.12.1.4.3 | ScalarevMgmtReprocess | read-write | current | Number of sensors that have generated events since reset. Write this to reprocess each sensor's last generated event since reset. The value to write determines… |
| 1.3.6.1.4.1.3052.18.2.12.5.1 | ScalarevSched1Enable | read-write | current | ON/OFF enable this scheduled event |
| 1.3.6.1.4.1.3052.18.2.12.5.2 | ScalarevSched1Actions | read-write | current | Actions for this scheduled event |
| 1.3.6.1.4.1.3052.18.2.12.5.3 | ScalarevSched1Message | read-write | current | Message for this scheduled event |
| 1.3.6.1.4.1.3052.18.2.12.5.4 | ScalarevSched1TrapNum | read-write | current | Trap number for this scheduled event |
| 1.3.6.1.4.1.3052.18.2.12.5.5 | ScalarevSched1Class | read-write | current | Class for this scheduled event |
| 1.3.6.1.4.1.3052.18.2.12.5.6 | ScalarevSched1Sunday | read-write | current | Time on Sunday (HH:MM) when this scheduled event triggers |
| 1.3.6.1.4.1.3052.18.2.12.5.7 | ScalarevSched1Monday | read-write | current | Time on Monday (HH:MM) when this scheduled event triggers |
| 1.3.6.1.4.1.3052.18.2.12.5.8 | ScalarevSched1Tuesday | read-write | current | Time on Tuesday (HH:MM) when this scheduled event triggers |
| 1.3.6.1.4.1.3052.18.2.12.5.9 | ScalarevSched1Wednesday | read-write | current | Time on Wednesday (HH:MM) when this scheduled event triggers |
| 1.3.6.1.4.1.3052.18.2.12.5.10 | ScalarevSched1Thursday | read-write | current | Time on Thursday (HH:MM) when this scheduled event triggers |
| 1.3.6.1.4.1.3052.18.2.12.5.11 | ScalarevSched1Friday | read-write | current | Time on Friday (HH:MM) when this scheduled event triggers |
| 1.3.6.1.4.1.3052.18.2.12.5.12 | ScalarevSched1Saturday | read-write | current | Time on Saturday (HH:MM) when this scheduled event triggers |
| 1.3.6.1.4.1.3052.18.2.12.5.13 | ScalarevSched1Exclusions | read-write | current | Exclusions (space-separated MM/DD-formatted dates) for this scheduled event |
| 1.3.6.1.4.1.3052.18.2.12.6.1 | ScalarevSched2Enable | read-write | current | ON/OFF enable this scheduled event |
| 1.3.6.1.4.1.3052.18.2.12.6.2 | ScalarevSched2Actions | read-write | current | Actions for this scheduled event |
| 1.3.6.1.4.1.3052.18.2.12.6.3 | ScalarevSched2Message | read-write | current | Message for this scheduled event |
| 1.3.6.1.4.1.3052.18.2.12.6.4 | ScalarevSched2TrapNum | read-write | current | Trap number for this scheduled event |
| 1.3.6.1.4.1.3052.18.2.12.6.5 | ScalarevSched2Class | read-write | current | Class for this scheduled event |
| 1.3.6.1.4.1.3052.18.2.12.6.6 | ScalarevSched2Sunday | read-write | current | Time on Sunday (HH:MM) when this scheduled event triggers |
| 1.3.6.1.4.1.3052.18.2.12.6.7 | ScalarevSched2Monday | read-write | current | Time on Monday (HH:MM) when this scheduled event triggers |
| 1.3.6.1.4.1.3052.18.2.12.6.8 | ScalarevSched2Tuesday | read-write | current | Time on Tuesday (HH:MM) when this scheduled event triggers |
| 1.3.6.1.4.1.3052.18.2.12.6.9 | ScalarevSched2Wednesday | read-write | current | Time on Wednesday (HH:MM) when this scheduled event triggers |
| 1.3.6.1.4.1.3052.18.2.12.6.10 | ScalarevSched2Thursday | read-write | current | Time on Thursday (HH:MM) when this scheduled event triggers |
| 1.3.6.1.4.1.3052.18.2.12.6.11 | ScalarevSched2Friday | read-write | current | Time on Friday (HH:MM) when this scheduled event triggers |
| 1.3.6.1.4.1.3052.18.2.12.6.12 | ScalarevSched2Saturday | read-write | current | Time on Saturday (HH:MM) when this scheduled event triggers |
| 1.3.6.1.4.1.3052.18.2.12.6.13 | ScalarevSched2Exclusions | read-write | current | Exclusions (space-separated MM/DD-formatted dates) for this scheduled event |
| 1.3.6.1.4.1.3052.18.2.12.9.1 | ScalarevNoSensorTimeout | read-write | current | Timeout (seconds) after which an EventSensor becomes unresponsive that this event is triggered |
| 1.3.6.1.4.1.3052.18.2.12.9.2 | ScalarevNoSensorActions | read-write | current | Actions for no sensor event |
| 1.3.6.1.4.1.3052.18.2.12.9.3 | ScalarevNoSensorTrapNum | read-write | current | Trap number for no sensor event |
| 1.3.6.1.4.1.3052.18.2.12.9.4 | ScalarevNoSensorClass | read-write | current | Class for no sensor event |
| 1.3.6.1.4.1.3052.18.2.12.11.1 | TablefuelSensorGeneralTable | not-accessible | current | This table organizes general fuel sensor attributes. |
| 1.3.6.1.4.1.3052.18.2.12.11.1.1 | RowfsGenEntry | not-accessible | current | Entry for fuel sensor general config table. |
| 1.3.6.1.4.1.3052.18.2.12.11.1.1.1 | ColumnfsGenIndex | read-only | current | Which fuel sensor in the fuel sensor general config table. |
| 1.3.6.1.4.1.3052.18.2.12.11.1.1.2 | ColumnfsGenName | read-write | current | Fuel sensor name. |
| 1.3.6.1.4.1.3052.18.2.12.11.1.1.3 | ColumnfsGenSensorType | read-write | current | Type of fuel sensor in use; NONE disables the fuel sensor. |
| 1.3.6.1.4.1.3052.18.2.12.11.1.1.4 | ColumnfsGenDistanceUnit | read-write | current | Distance units in use when setting and indicating tank dimensions. |
| 1.3.6.1.4.1.3052.18.2.12.11.1.1.5 | ColumnfsGenRawValueTop | read-write | current | Analog input reading corresponding to the SENSOR FULL point. |
| 1.3.6.1.4.1.3052.18.2.12.11.1.1.6 | ColumnfsGenTopOffset | read-write | current | Distance, in the specified distance unit, between the SENSOR FULL point and the TANK FULL point. The value is positive if the SENSOR FULL point is above the TA… |
| 1.3.6.1.4.1.3052.18.2.12.11.1.1.7 | ColumnfsGenRawValueBottom | read-write | current | Analog input reading corresponding to the minimum fluid height measurable by the fuel sensor. |
| 1.3.6.1.4.1.3052.18.2.12.11.1.1.8 | ColumnfsGenBottomOffset | read-write | current | Distance, in the specified distance unit, between the SENSOR EMPTY point and the TANK EMPTY point. The value is positive if the SENSOR EMPTY point is above the… |
| 1.3.6.1.4.1.3052.18.2.12.11.1.1.9 | ColumnfsGenInputES | read-write | current | Which eventsensor contains the analog input associated with this fuel sensor. Allowed values are 200 (for internal ES), or 1-16. |
| 1.3.6.1.4.1.3052.18.2.12.11.1.1.10 | ColumnfsGenInputPoint | read-write | current | Which analog input point, on the specified eventsensor, that is associated with the fuel sensor. |
| 1.3.6.1.4.1.3052.18.2.12.11.1.1.11 | ColumnfsGenFilterAveraging | read-write | current | Fuel sensor filter averaging factor. |
| 1.3.6.1.4.1.3052.18.2.12.11.1.1.12 | ColumnfsGenSysrepEnable | read-write | current | Fuel sensor System Reporting enable. |
| 1.3.6.1.4.1.3052.18.2.12.11.1.1.13 | ColumnfsGenSysrepThreshold | read-write | current | Fuel sensor System Reporting threshold (floating point value). |
| 1.3.6.1.4.1.3052.18.2.12.11.1.1.14 | ColumnfsGenSysrepLimit | read-write | current | Fuel sensor System Reporting limit. |
| 1.3.6.1.4.1.3052.18.2.12.11.1.1.15 | ColumnfsGenSysrepPackage | read-write | current | Fuel sensor System Reporting package number. |
| 1.3.6.1.4.1.3052.18.2.12.11.1.1.16 | ColumnfsGenSysrepType | read-write | current | Fuel sensor ASM profile type. |
| 1.3.6.1.4.1.3052.18.2.12.11.2 | TablefuelSensorTankTable | not-accessible | current | This table organizes tank-specific fuel sensor attributes. |
| 1.3.6.1.4.1.3052.18.2.12.11.2.1 | RowfsTankEntry | not-accessible | current | Entry for fuel sensor tank config table. |
| 1.3.6.1.4.1.3052.18.2.12.11.2.1.1 | ColumnfsTankIndex | read-only | current | Which fuel sensor in the fuel sensor tank config table. |
| 1.3.6.1.4.1.3052.18.2.12.11.2.1.2 | ColumnfsTankHeight | read-write | current | Height of the tank, from the TANK EMPTY point to the TANK FULL point, in the specified distance unit (i.e. TANK HEIGHT). This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.11.2.1.3 | ColumnfsTankDimA | read-write | current | Tank dimension measurement A for certain tank profiles. For HORIZ OVAL, this is the length of the straight section. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.11.2.1.4 | ColumnfsTankDimB | read-write | current | Tank dimension measurement B for certain tank profiles. For HORIZ OVAL, this is the radius of the curved section. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.11.2.1.5 | ColumnfsTankVolume | read-write | current | How many volume units the tank contains, when full. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.11.2.1.6 | ColumnfsTankVolumeUnit | read-write | current | Name of the unit representing fluid volume in the tank. This is only used for display purposes; it does not affect the volume calculation. |
| 1.3.6.1.4.1.3052.18.2.12.11.2.1.7 | ColumnfsTankShape | read-write | current | The shape of the fuel tank. A value of LINEAR produces a fluid volume reading that is directly proportional to fluid height. The HORIZ CYL and HORIZ OVAL setti… |
| 1.3.6.1.4.1.3052.18.2.12.11.3 | TablefuelSensorCustomTankTable | not-accessible | current | This table organizes the custom tank strapping table. Each fuel sensor has a table of height/volume pairs in service only when the tank shape (fsTankShape) in … |
| 1.3.6.1.4.1.3052.18.2.12.11.3.1 | RowfsCustomTankEntry | not-accessible | current | Entry for fuel sensor custom tank config table. |
| 1.3.6.1.4.1.3052.18.2.12.11.3.1.1 | ColumnfsCustomTankIndexFS | read-only | current | Which fuel sensor in the fuel sensor tank config table. This is the first of two indexes for this SNMP table. |
| 1.3.6.1.4.1.3052.18.2.12.11.3.1.2 | ColumnfsCustomTankIndexDatum | read-only | current | Which hight/volume pair: there are 32 pairs per fuel sensor. This is the second of two indexes for this SNMP table. |
| 1.3.6.1.4.1.3052.18.2.12.11.3.1.3 | ColumnfsCustomTankHeight | read-write | current | Height of custom tank height/volume pair. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.11.3.1.4 | ColumnfsCustomTankVolume | read-write | current | Volume of custom tank height/volume pair. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.11.4 | TablefuelSensorVolumeTable | not-accessible | current | This table organizes volume-event-specific fuel sensor attributes. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1 | RowfsVolumeEntry | not-accessible | current | Entry for fuel sensor volume event config table. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.1 | ColumnfsVolumeIndex | read-only | current | Which fuel sensor in the fuel sensor volume event config table. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.2 | ColumnfsVolumeEnable | read-write | current | Enable fuel sensor volume events. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.3 | ColumnfsVolumeDeadband | read-write | current | Fuel sensor deadband (hysteresis). This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.4 | ColumnfsVolumeVHighValue | read-write | current | Fuel sensor volume very high event threshold value. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.5 | ColumnfsVolumeVHighActions | read-write | current | Fuel sensor volume very high event threshold actions. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.6 | ColumnfsVolumeVHighTrapNum | read-write | current | Fuel sensor volume very high event threshold trap number. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.7 | ColumnfsVolumeVHighClass | read-write | current | Fuel sensor volume very high event threshold class (severity). |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.8 | ColumnfsVolumeHighValue | read-write | current | Fuel sensor volume high event threshold value. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.9 | ColumnfsVolumeHighActions | read-write | current | Fuel sensor volume high event threshold actions. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.10 | ColumnfsVolumeHighTrapNum | read-write | current | Fuel sensor volume high event threshold trap number. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.11 | ColumnfsVolumeHighClass | read-write | current | Fuel sensor volume high event threshold class (severity). |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.12 | ColumnfsVolumeNormalActions | read-write | current | Fuel sensor volume return to normal actions. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.13 | ColumnfsVolumeNormalTrapNum | read-write | current | Fuel sensor volume return to normal trap number. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.14 | ColumnfsVolumeNormalClass | read-write | current | Fuel sensor volume return to normal class (severity). |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.15 | ColumnfsVolumeLowValue | read-write | current | Fuel sensor volume low event threshold value. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.16 | ColumnfsVolumeLowActions | read-write | current | Fuel sensor volume low event threshold actions. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.17 | ColumnfsVolumeLowTrapNum | read-write | current | Fuel sensor volume low event threshold trap number. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.18 | ColumnfsVolumeLowClass | read-write | current | Fuel sensor volume low event threshold class (severity). |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.19 | ColumnfsVolumeVLowValue | read-write | current | Fuel sensor volume very low event threshold value. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.20 | ColumnfsVolumeVLowActions | read-write | current | Fuel sensor volume very low event threshold actions. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.21 | ColumnfsVolumeVLowTrapNum | read-write | current | Fuel sensor volume very low event threshold trap number. |
| 1.3.6.1.4.1.3052.18.2.12.11.4.1.22 | ColumnfsVolumeVLowClass | read-write | current | Fuel sensor volume very low event threshold class (severity). |
| 1.3.6.1.4.1.3052.18.2.12.11.5 | TablefuelSensorDisconnectTable | not-accessible | current | This table organizes disconnect-event-specific fuel sensor attributes. |
| 1.3.6.1.4.1.3052.18.2.12.11.5.1 | RowfsDiscEntry | not-accessible | current | Entry for fuel sensor disconnect event config table. |
| 1.3.6.1.4.1.3052.18.2.12.11.5.1.1 | ColumnfsDiscIndex | read-only | current | Which fuel sensor in the fuel sensor disconnect event config table. |
| 1.3.6.1.4.1.3052.18.2.12.11.5.1.2 | ColumnfsDiscEnable | read-write | current | Fuel sensor disconnect event enable. |
| 1.3.6.1.4.1.3052.18.2.12.11.5.1.3 | ColumnfsDiscHighValue | read-write | current | High end of input value range when fuel sensor is disconnected. This is in the units of the analog input value. |
| 1.3.6.1.4.1.3052.18.2.12.11.5.1.4 | ColumnfsDiscLowValue | read-write | current | Low end of input value range when fuel sensor is disconnected. This is in the units of the analog input value. |
| 1.3.6.1.4.1.3052.18.2.12.11.5.1.5 | ColumnfsDiscActions | read-write | current | Fuel sensor disconnect event actions. |
| 1.3.6.1.4.1.3052.18.2.12.11.5.1.6 | ColumnfsDiscTrapNum | read-write | current | Fuel sensor disconnect event trap number. |
| 1.3.6.1.4.1.3052.18.2.12.11.5.1.7 | ColumnfsDiscClass | read-write | current | Fuel sensor disconnect event class (severity). |
| 1.3.6.1.4.1.3052.18.2.12.11.5.1.8 | ColumnfsDiscNormalActions | read-write | current | Fuel sensor disconnect return to normal actions. |
| 1.3.6.1.4.1.3052.18.2.12.11.5.1.9 | ColumnfsDiscNormalTrapNum | read-write | current | Fuel sensor disconnect return to normal trap number. |
| 1.3.6.1.4.1.3052.18.2.12.11.5.1.10 | ColumnfsDiscNormalClass | read-write | current | Fuel sensor disconnect return to normal class (severity). |
| 1.3.6.1.4.1.3052.18.2.12.12.1 | TableacpmGeneralTable | not-accessible | current | This table organizes general AC power monitor attributes. |
| 1.3.6.1.4.1.3052.18.2.12.12.1.1 | RowacpmGenEntry | not-accessible | current | Entry for AC power monitor general config table. |
| 1.3.6.1.4.1.3052.18.2.12.12.1.1.1 | ColumnacpmGenIndex | read-only | current | Which AC power monitor in the AC power monitor general config table. |
| 1.3.6.1.4.1.3052.18.2.12.12.1.1.2 | ColumnacpmGenDevice | read-write | current | Model of the AC power monitor device. The unit needs this setting to know which registers to poll for the various data items, among other things. |
| 1.3.6.1.4.1.3052.18.2.12.12.1.1.3 | ColumnacpmGenName | read-write | current | Name for the AC power monitor device. |
| 1.3.6.1.4.1.3052.18.2.12.12.1.1.4 | ColumnacpmGenAddress | read-write | current | Modbus address of the AC power monitor device. |
| 1.3.6.1.4.1.3052.18.2.12.12.1.1.5 | ColumnacpmGenPtRatio | read-write | current | Ratio of secondary turns to primary turns on potential transformers (PT). |
| 1.3.6.1.4.1.3052.18.2.12.12.1.1.6 | ColumnacpmGenCtRatio | read-write | current | Ratio of secondary turns to primary turns on current transformers (CT). |
| 1.3.6.1.4.1.3052.18.2.12.12.1.1.7 | ColumnacpmGenPowerType | read-write | current | Type of power being monitored. |
| 1.3.6.1.4.1.3052.18.2.12.12.1.1.8 | ColumnacpmGenSysrepPackage | read-write | current | System reporting package number. |
| 1.3.6.1.4.1.3052.18.2.12.12.1.1.9 | ColumnacpmGenSysrepType | read-write | current | ASM profile type. |
| 1.3.6.1.4.1.3052.18.2.12.12.1.1.10 | ColumnacpmGenEnable | read-write | current | AC power monitor enable. |
| 1.3.6.1.4.1.3052.18.2.12.12.2 | TableacpmAvgVoltageTable | not-accessible | current | This table organizes AC power monitor average voltage attributes. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1 | RowacpmAvgVoltageEntry | not-accessible | current | Entry for AC power monitor average voltage config table. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.1 | ColumnacpmAvgVoltageIndex | read-only | current | Which AC power monitor in the AC power monitor average voltage config table. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.2 | ColumnacpmAvgVoltageEnable | read-write | current | Enable AC power monitor average voltage events. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.3 | ColumnacpmAvgVoltageDeadband | read-write | current | Deadband (hysteresis) for average voltage event. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.4 | ColumnacpmAvgVoltageVHighValue | read-write | current | Very high event threshold. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.5 | ColumnacpmAvgVoltageVHighActions | read-write | current | Very high event actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.6 | ColumnacpmAvgVoltageVHighTrapNum | read-write | current | Very high event trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.7 | ColumnacpmAvgVoltageVHighClass | read-write | current | Very high event class. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.8 | ColumnacpmAvgVoltageHighValue | read-write | current | High event threshold. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.9 | ColumnacpmAvgVoltageHighActions | read-write | current | High event actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.10 | ColumnacpmAvgVoltageHighTrapNum | read-write | current | High event trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.11 | ColumnacpmAvgVoltageHighClass | read-write | current | High event class. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.12 | ColumnacpmAvgVoltageNormalActions | read-write | current | Return to normal actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.13 | ColumnacpmAvgVoltageNormalTrapNum | read-write | current | Return to normal trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.14 | ColumnacpmAvgVoltageNormalClass | read-write | current | Return to normal class. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.15 | ColumnacpmAvgVoltageLowValue | read-write | current | Low event threshold. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.16 | ColumnacpmAvgVoltageLowActions | read-write | current | Low event actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.17 | ColumnacpmAvgVoltageLowTrapNum | read-write | current | Low event trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.18 | ColumnacpmAvgVoltageLowClass | read-write | current | Low event class. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.19 | ColumnacpmAvgVoltageVLowValue | read-write | current | Very low event threshold. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.20 | ColumnacpmAvgVoltageVLowActions | read-write | current | Very low event actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.21 | ColumnacpmAvgVoltageVLowTrapNum | read-write | current | Very low event trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.22 | ColumnacpmAvgVoltageVLowClass | read-write | current | Very low event class. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.23 | ColumnacpmAvgVoltageSysrepEnable | read-write | current | System reporting enable for average voltage telemetry. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.24 | ColumnacpmAvgVoltageSysrepThreshold | read-write | current | System reporting threshold for average voltage telemetry. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.2.1.25 | ColumnacpmAvgVoltageSysrepLimit | read-write | current | System reporting limit for average voltage telemetry. |
| 1.3.6.1.4.1.3052.18.2.12.12.3 | TableacpmAvgCurrentTable | not-accessible | current | This table organizes AC power monitor average current attributes. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1 | RowacpmAvgCurrentEntry | not-accessible | current | Entry for AC power monitor average current config table. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.1 | ColumnacpmAvgCurrentIndex | read-only | current | Which AC power monitor in the AC power monitor average current config table. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.2 | ColumnacpmAvgCurrentEnable | read-write | current | Enable AC power monitor average current events. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.3 | ColumnacpmAvgCurrentDeadband | read-write | current | Deadband (hysteresis) for average current event. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.4 | ColumnacpmAvgCurrentVHighValue | read-write | current | Very high event threshold. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.5 | ColumnacpmAvgCurrentVHighActions | read-write | current | Very high event actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.6 | ColumnacpmAvgCurrentVHighTrapNum | read-write | current | Very high event trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.7 | ColumnacpmAvgCurrentVHighClass | read-write | current | Very high event class. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.8 | ColumnacpmAvgCurrentHighValue | read-write | current | High event threshold. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.9 | ColumnacpmAvgCurrentHighActions | read-write | current | High event actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.10 | ColumnacpmAvgCurrentHighTrapNum | read-write | current | High event trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.11 | ColumnacpmAvgCurrentHighClass | read-write | current | High event class. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.12 | ColumnacpmAvgCurrentNormalActions | read-write | current | Return to normal actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.13 | ColumnacpmAvgCurrentNormalTrapNum | read-write | current | Return to normal trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.14 | ColumnacpmAvgCurrentNormalClass | read-write | current | Return to normal class. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.15 | ColumnacpmAvgCurrentLowValue | read-write | current | Low event threshold. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.16 | ColumnacpmAvgCurrentLowActions | read-write | current | Low event actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.17 | ColumnacpmAvgCurrentLowTrapNum | read-write | current | Low event trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.18 | ColumnacpmAvgCurrentLowClass | read-write | current | Low event class. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.19 | ColumnacpmAvgCurrentVLowValue | read-write | current | Very low event threshold. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.20 | ColumnacpmAvgCurrentVLowActions | read-write | current | Very low event actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.21 | ColumnacpmAvgCurrentVLowTrapNum | read-write | current | Very low event trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.22 | ColumnacpmAvgCurrentVLowClass | read-write | current | Very low event class. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.23 | ColumnacpmAvgCurrentSysrepEnable | read-write | current | System reporting enable for average current telemetry. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.24 | ColumnacpmAvgCurrentSysrepThreshold | read-write | current | System reporting threshold for average current telemetry. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.3.1.25 | ColumnacpmAvgCurrentSysrepLimit | read-write | current | System reporting limit for average current telemetry. |
| 1.3.6.1.4.1.3052.18.2.12.12.4 | TableacpmFreqTable | not-accessible | current | This table organizes AC power monitor frequency attributes. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1 | RowacpmFreqEntry | not-accessible | current | Entry for AC power monitor frequency config table. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.1 | ColumnacpmFreqIndex | read-only | current | Which AC power monitor in the AC power monitor frequency config table. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.2 | ColumnacpmFreqEnable | read-write | current | Enable AC power monitor frequency events. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.3 | ColumnacpmFreqDeadband | read-write | current | Deadband (hysteresis) for frequency event. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.4 | ColumnacpmFreqVHighValue | read-write | current | Very high event threshold. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.5 | ColumnacpmFreqVHighActions | read-write | current | Very high event actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.6 | ColumnacpmFreqVHighTrapNum | read-write | current | Very high event trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.7 | ColumnacpmFreqVHighClass | read-write | current | Very high event class. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.8 | ColumnacpmFreqHighValue | read-write | current | High event threshold. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.9 | ColumnacpmFreqHighActions | read-write | current | High event actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.10 | ColumnacpmFreqHighTrapNum | read-write | current | High event trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.11 | ColumnacpmFreqHighClass | read-write | current | High event class. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.12 | ColumnacpmFreqNormalActions | read-write | current | Return to normal actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.13 | ColumnacpmFreqNormalTrapNum | read-write | current | Return to normal trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.14 | ColumnacpmFreqNormalClass | read-write | current | Return to normal class. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.15 | ColumnacpmFreqLowValue | read-write | current | Low event threshold. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.16 | ColumnacpmFreqLowActions | read-write | current | Low event actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.17 | ColumnacpmFreqLowTrapNum | read-write | current | Low event trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.18 | ColumnacpmFreqLowClass | read-write | current | Low event class. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.19 | ColumnacpmFreqVLowValue | read-write | current | Very low event threshold. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.20 | ColumnacpmFreqVLowActions | read-write | current | Very low event actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.21 | ColumnacpmFreqVLowTrapNum | read-write | current | Very low event trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.22 | ColumnacpmFreqVLowClass | read-write | current | Very low event class. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.23 | ColumnacpmFreqSysrepEnable | read-write | current | System reporting enable for frequency telemetry. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.24 | ColumnacpmFreqSysrepThreshold | read-write | current | System reporting threshold for frequency telemetry. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.4.1.25 | ColumnacpmFreqSysrepLimit | read-write | current | System reporting limit for frequency telemetry. |
| 1.3.6.1.4.1.3052.18.2.12.12.5 | TableacpmTotalRealPowerTable | not-accessible | current | This table organizes AC power monitor total real power attributes. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1 | RowacpmTRPEntry | not-accessible | current | Entry for AC power monitor total real power config table. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.1 | ColumnacpmTRPIndex | read-only | current | Which AC power monitor in the AC power monitor total real power config table. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.2 | ColumnacpmTRPEnable | read-write | current | Enable AC power monitor total real power events. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.3 | ColumnacpmTRPDeadband | read-write | current | Deadband (hysteresis) for total real power event. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.4 | ColumnacpmTRPVHighValue | read-write | current | Very high event threshold. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.5 | ColumnacpmTRPVHighActions | read-write | current | Very high event actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.6 | ColumnacpmTRPVHighTrapNum | read-write | current | Very high event trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.7 | ColumnacpmTRPVHighClass | read-write | current | Very high event class. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.8 | ColumnacpmTRPHighValue | read-write | current | High event threshold. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.9 | ColumnacpmTRPHighActions | read-write | current | High event actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.10 | ColumnacpmTRPHighTrapNum | read-write | current | High event trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.11 | ColumnacpmTRPHighClass | read-write | current | High event class. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.12 | ColumnacpmTRPNormalActions | read-write | current | Return to normal actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.13 | ColumnacpmTRPNormalTrapNum | read-write | current | Return to normal trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.14 | ColumnacpmTRPNormalClass | read-write | current | Return to normal class. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.15 | ColumnacpmTRPLowValue | read-write | current | Low event threshold. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.16 | ColumnacpmTRPLowActions | read-write | current | Low event actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.17 | ColumnacpmTRPLowTrapNum | read-write | current | Low event trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.18 | ColumnacpmTRPLowClass | read-write | current | Low event class. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.19 | ColumnacpmTRPVLowValue | read-write | current | Very low event threshold. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.20 | ColumnacpmTRPVLowActions | read-write | current | Very low event actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.21 | ColumnacpmTRPVLowTrapNum | read-write | current | Very low event trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.22 | ColumnacpmTRPVLowClass | read-write | current | Very low event class. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.23 | ColumnacpmTRPSysrepEnable | read-write | current | System reporting enable for total real power telemetry. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.24 | ColumnacpmTRPSysrepThreshold | read-write | current | System reporting threshold for total real power telemetry. This is a floating point value. |
| 1.3.6.1.4.1.3052.18.2.12.12.5.1.25 | ColumnacpmTRPSysrepLimit | read-write | current | System reporting limit for total real power telemetry. |
| 1.3.6.1.4.1.3052.18.2.12.12.6 | TableacpmDisconnectTable | not-accessible | current | This table organizes AC power monitor device disconnect event attributes. |
| 1.3.6.1.4.1.3052.18.2.12.12.6.1 | RowacpmDisconnectEntry | not-accessible | current | Entry for AC power monitor device disconnect event config table. |
| 1.3.6.1.4.1.3052.18.2.12.12.6.1.1 | ColumnacpmDisconnectIndex | read-only | current | Which AC power monitor in the AC power monitor device disconnect event config table. |
| 1.3.6.1.4.1.3052.18.2.12.12.6.1.2 | ColumnacpmDisconnectEnable | read-write | current | Enable AC power monitor device disconnect event. |
| 1.3.6.1.4.1.3052.18.2.12.12.6.1.3 | ColumnacpmDisconnectActions | read-write | current | Actions for disconnect event. |
| 1.3.6.1.4.1.3052.18.2.12.12.6.1.4 | ColumnacpmDisconnectTrapNum | read-write | current | Trap number for disconnect event. |
| 1.3.6.1.4.1.3052.18.2.12.12.6.1.5 | ColumnacpmDisconnectClass | read-write | current | Class for disconnect event. |
| 1.3.6.1.4.1.3052.18.2.12.12.6.1.6 | ColumnacpmDisconnectNormalActions | read-write | current | Actions for disconnect return to normal event. |
| 1.3.6.1.4.1.3052.18.2.12.12.6.1.7 | ColumnacpmDisconnectNormalTrapNum | read-write | current | Trap number for disconnect return to normal event. |
| 1.3.6.1.4.1.3052.18.2.12.12.6.1.8 | ColumnacpmDisconnectNormalClass | read-write | current | Class for disconnect return to normal event. |
| 1.3.6.1.4.1.3052.18.2.12.12.7 | TableacpmTotalPowerFactorTable | not-accessible | current | This table organizes AC power monitor device total power factor event attributes. |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1 | RowacpmTPFEntry | not-accessible | current | Entry for AC power monitor device total power factor event config table. |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1.1 | ColumnacpmTPFIndex | read-only | current | Which AC power monitor in the AC power monitor device disconnect event config table. |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1.2 | ColumnacpmTPFEnable | read-write | current | Enable AC power monitor device disconnect event. |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1.3 | ColumnacpmTPFDeadband | read-write | current | Deadband (hysteresis). |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1.4 | ColumnacpmTPFNormalActions | read-write | current | Normal actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1.5 | ColumnacpmTPFNormalTrapNum | read-write | current | Normal trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1.6 | ColumnacpmTPFNormalClass | read-write | current | Normal class. |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1.7 | ColumnacpmTPFLowValue | read-write | current | Low threshold. |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1.8 | ColumnacpmTPFLowActions | read-write | current | Low actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1.9 | ColumnacpmTPFLowTrapNum | read-write | current | Low trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1.10 | ColumnacpmTPFLowClass | read-write | current | Low class. |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1.11 | ColumnacpmTPFVLowValue | read-write | current | Very Low threshold. |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1.12 | ColumnacpmTPFVLowActions | read-write | current | Very Low actions. |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1.13 | ColumnacpmTPFVLowTrapNum | read-write | current | Very Low trap number. |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1.14 | ColumnacpmTPFVLowClass | read-write | current | Very Low class. |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1.15 | ColumnacpmTPFSysrepEnable | read-write | current | System reporting enable. |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1.16 | ColumnacpmTPFSysrepThreshold | read-write | current | System reporting threshold. |
| 1.3.6.1.4.1.3052.18.2.12.12.7.1.17 | ColumnacpmTPFSysrepLimit | read-write | current | System reporting limit. |
| 1.3.6.1.4.1.3052.18.2.12.16.1 | ScalarevResetEnable | read-write | current | Enable/disable reset event. This event is triggered when the unit finishes booting. |
| 1.3.6.1.4.1.3052.18.2.12.16.2 | ScalarevResetDelay | read-write | current | Number of seconds to wait after unit finishes booting before triggering the reset event. |
| 1.3.6.1.4.1.3052.18.2.12.16.3 | ScalarevResetActions | read-write | current | Actions for reset event. |
| 1.3.6.1.4.1.3052.18.2.12.16.4 | ScalarevResetMessage | read-write | current | Message for reset event. |
| 1.3.6.1.4.1.3052.18.2.12.16.5 | ScalarevResetTrapnum | read-write | current | Trap number for reset event. |
| 1.3.6.1.4.1.3052.18.2.12.16.6 | ScalarevResetClass | read-write | current | Class (severity) for reset event. |
| 1.3.6.1.4.1.3052.18.2.14.3.1 | ScalaractionSchedEnable | read-write | current | ON/OFF enable action schedule |
| 1.3.6.1.4.1.3052.18.2.14.3.2 | ScalaractionSchedBegin | read-write | current | action schedule begin time (HH:MM) |
| 1.3.6.1.4.1.3052.18.2.14.3.3 | ScalaractionSchedEnd | read-write | current | action schedule end time (HH:MM) |
| 1.3.6.1.4.1.3052.18.2.14.3.4 | ScalaractionSchedWeekdaysOnly | read-write | current | ON/OFF whether the action schedule applies to weekdays only (ON) or all days (OFF) |
| 1.3.6.1.4.1.3052.18.2.14.4.1 | ScalaractionAsentriaRequireAck | read-write | current | ON/OFF Asentria action requires an ack from the receiver |
| 1.3.6.1.4.1.3052.18.2.14.4.2 | ScalaractionAsentriaVersion | read-write | current | version 1.0 or 1.1 |
| 1.3.6.1.4.1.3052.18.2.14.4.3 | ScalaractionAsentriaTCPPort | read-write | current | TCP port used for TCP-based Asentria alarms |
| 1.3.6.1.4.1.3052.18.2.16.1.4.1 | ScalarsysTimeNetEnable | read-write | current | Network time mode |
| 1.3.6.1.4.1.3052.18.2.16.1.4.2 | TablesysTimeNetHostTable | not-accessible | current | Table of hosts to use for network time services |
| 1.3.6.1.4.1.3052.18.2.16.1.4.2.1 | RowsysTimeNetHostEntry | not-accessible | current | Entry for table of hosts to use for network time services |
| 1.3.6.1.4.1.3052.18.2.16.1.4.2.1.1 | ColumnsysTimeNetHostIndex | read-only | current | Index for table of hosts to use for network time services |
| 1.3.6.1.4.1.3052.18.2.16.1.4.2.1.2 | ColumnsysTimeNetHost | read-write | current | host to use for network time services |
| 1.3.6.1.4.1.3052.18.2.16.2.1 | ScalarsysPTTimeout | read-write | current | Timeout (minutes) of inactivity after which a pass-through session is terminated (0 means it never terminates) |
| 1.3.6.1.4.1.3052.18.2.16.2.2 | ScalarsysPTEndPause | read-write | current | number of 16ths of a second between escape characters received on pass-through origin IO handle that are reuired for the escape characters to register as pass-… |
| 1.3.6.1.4.1.3052.18.2.16.2.3 | ScalarsysPTJoinable | read-write | current | Enable joinable pass-through sessions. |
| 1.3.6.1.4.1.3052.18.2.16.8.1 | ScalarsysTimeStampTimeFormat | read-write | current | Format of time stamp: HH:MM,HH:MM:SS,BLANK |
| 1.3.6.1.4.1.3052.18.2.16.8.2 | ScalarsysTimeStampDateFormat | read-write | current | Format of date stamp: MM/DD,MM/DD/YY,MM/DD/YYYY,BLANK |
| 1.3.6.1.4.1.3052.18.2.16.8.3 | ScalarsysTimeStampSpaceAfter | read-write | current | ON/OFF Inlude a space after timestamp |
| 1.3.6.1.4.1.3052.18.2.16.9.1 | ScalarsysLogMode | read-write | current | Syslog mode: disabled, emit UDP (REMOTE), save in a rotating file set (FILE), or emit on a listening socket (SERVER) |
| 1.3.6.1.4.1.3052.18.2.16.9.2 | ScalarsysLoghost | read-write | current | Syslog host: destination machine when syslog mode is REMOTE |
| 1.3.6.1.4.1.3052.18.2.16.9.3 | ScalarsysLogFilter | read-write | current | String describing what functions place data in the syslog |
| 1.3.6.1.4.1.3052.18.2.16.9.4 | ScalarsysLogFileSize | read-write | current | Size (in KB) of syslog files (when syslog mode is SERVER or FILE) |
| 1.3.6.1.4.1.3052.18.2.16.9.5 | ScalarsysLogFileCount | read-write | current | Number of files in syslog file set (when syslog mode is SERVER or FILE) |
| 1.3.6.1.4.1.3052.18.2.16.9.6 | ScalarsysLogListenPort | read-write | current | TCP port on which the unit listens for a connection on which syslog data is dumped (when syslog mode is SERVER) |
| 1.3.6.1.4.1.3052.18.2.16.10.1 | ScalarsysCRDBCapacity | read-only | current | Capacity of Call Record Database (in KB) |
| 1.3.6.1.4.1.3052.18.2.16.10.2 | ScalarsysCRDBPercentFull | read-only | current | Percent of the CRDB used |
| 1.3.6.1.4.1.3052.18.2.16.10.3 | TablesysCRDBFileIDTable | not-accessible | current | Table of CRDB file IDs |
| 1.3.6.1.4.1.3052.18.2.16.10.3.1 | RowsysCRDBFileIDEntry | not-accessible | current | Entry for table of CRDB file IDs |
| 1.3.6.1.4.1.3052.18.2.16.10.3.1.1 | ColumnsysCRDBFileIDIndex | read-only | current | Index for table of CRDB file IDs |
| 1.3.6.1.4.1.3052.18.2.16.10.3.1.2 | ColumnsysCRDBFileID | read-write | current | ID of CRDB file for this port-associated file x |
| 1.3.6.1.4.1.3052.18.2.16.10.4 | TablesysCRDBFileEnforceMinTable | not-accessible | current | Table of CRDB file minimum size enforcement settings |
| 1.3.6.1.4.1.3052.18.2.16.10.4.1 | RowsysCRDBFileEnforceMinEntry | not-accessible | current | Entry for table of CRDB file minimum size enforcement settings |
| 1.3.6.1.4.1.3052.18.2.16.10.4.1.1 | ColumnsysCRDBFileEnforceMinIndex | read-only | current | Index for table of CRDB file minimum size enforcement settings |
| 1.3.6.1.4.1.3052.18.2.16.10.4.1.2 | ColumnsysCRDBFileEnforceMin | read-write | current | ON/OFF: enforce minimum size for this CRDB file x |
| 1.3.6.1.4.1.3052.18.2.16.14.1 | ScalarsysLocLatitude | read-write | current | Latitude portion of geographic coordinates as string |
| 1.3.6.1.4.1.3052.18.2.16.14.2 | ScalarsysLocLongitude | read-write | current | Longitude portion of geographic coordinates as string |
| 1.3.6.1.4.1.3052.18.2.16.14.3 | ScalarsysLocXOffset | read-write | current | X-offset portion of geographic coordinates as string |
| 1.3.6.1.4.1.3052.18.2.16.14.4 | ScalarsysLocYOffset | read-write | current | Y offset portion of geographic coordinates as string |
| 1.3.6.1.4.1.3052.18.2.16.14.5 | ScalarsysLocAngle | read-write | current | Angle portion of geographic coordinates as string |
| 1.3.6.1.4.1.3052.18.2.16.14.6 | ScalarsysLocAltitude | read-write | current | Altitude portion of geographic coordinates as string |
| 1.3.6.1.4.1.3052.18.2.17.1 | ScalarauditLogEnable | read-write | current | ON/OFF enable audit log |
| 1.3.6.1.4.1.3052.18.2.17.2 | ScalarauditLogStoreResets | read-write | current | ON/OFF audit log stores when the unit resets |
| 1.3.6.1.4.1.3052.18.2.17.3 | ScalarauditLogStoreCommands | read-write | current | ON/OFF audit log stores commands entered in a command session |
| 1.3.6.1.4.1.3052.18.2.17.4 | ScalarauditLogStoreOutputs | read-write | current | ON/OFF audit log stores output (relay output and power output) activity |
| 1.3.6.1.4.1.3052.18.2.17.5 | ScalarauditLogStoreAlarmActions | read-write | current | ON/OFF audit log stores action delivery activity |
| 1.3.6.1.4.1.3052.18.2.17.6 | ScalarauditLogStorePwdFailures | read-write | current | ON/OFF audit log stores when user was denied login |
| 1.3.6.1.4.1.3052.18.2.17.7 | ScalarauditLogStoreLogins | read-write | current | ON/OFF audit log stores when a user was allowed login |
| 1.3.6.1.4.1.3052.18.2.17.8 | ScalarauditLogStoreSHSK | read-write | current | ON/OFF audit log stores serial handshaking status (regardless of serial handshaking event) |
| 1.3.6.1.4.1.3052.18.2.17.9 | ScalarauditLogStorePassthrough | read-write | current | ON/OFF audit log stores pass-through activity |
| 1.3.6.1.4.1.3052.18.2.17.10 | ScalarauditLogStoreInactivity | read-write | current | ON/OFF audit log stores when sessions expire due to inactivity |
| 1.3.6.1.4.1.3052.18.2.17.11 | ScalarauditLogStorePolling | read-write | current | ON/OFF audit log stores CRDB polling activity |
| 1.3.6.1.4.1.3052.18.2.17.12 | ScalarauditLogMaxSize | read-write | current | Maximum size (in KB) of audit log |
| 1.3.6.1.4.1.3052.18.2.18.1 | ScalarscrGlobalEnable | read-write | current | ON/OFF enable scripting |
| 1.3.6.1.4.1.3052.18.2.18.2 | TablescrDTRCtrlPortEnableTable | not-accessible | current | Table of DTR control port enables |
| 1.3.6.1.4.1.3052.18.2.18.2.1 | RowscrDTRCtrlPortEnableEntry | not-accessible | current | Entry for table of DTR control port enables |
| 1.3.6.1.4.1.3052.18.2.18.2.1.1 | ColumnscrDTRCtrlPortEnableIndex | read-only | current | Index for table of DTR control port enables |
| 1.3.6.1.4.1.3052.18.2.18.2.1.2 | ColumnscrDTRCtrlPortEnable | read-write | current | ON/OFF enable DTR control of scripting for this port |
| 1.3.6.1.4.1.3052.18.2.18.3 | TablescrTable | not-accessible | current | Table of scripts |
| 1.3.6.1.4.1.3052.18.2.18.3.1 | RowscrEntry | not-accessible | current | Entry for table of scripts |
| 1.3.6.1.4.1.3052.18.2.18.3.1.1 | ColumnscrIndex | read-only | current | Index for table of scripts |
| 1.3.6.1.4.1.3052.18.2.18.3.1.2 | ColumnscrEnable | read-write | current | ON/OFF enable this script |
| 1.3.6.1.4.1.3052.18.2.18.3.1.3 | ColumnscrName | read-write | current | Name of this script |
| 1.3.6.1.4.1.3052.18.2.18.3.1.4 | ColumnscrFilename | read-write | current | Filename for this script |
| 1.3.6.1.4.1.3052.18.2.18.3.1.5 | ColumnscrRunAlways | read-write | current | ON/OFF: this script always runs |
| 1.3.6.1.4.1.3052.18.2.18.3.1.6 | ColumnscrRunAtStartup | read-write | current | ON/OFF: this script runs at startup |
| 1.3.6.1.4.1.3052.18.2.18.3.1.7 | ColumnscrRunScheduled | read-write | current | ON/OFF: this script runs at a certain time of day |
| 1.3.6.1.4.1.3052.18.2.18.3.1.8 | ColumnscrScheduleTime | read-write | current | Time of day (HH:MM) this script is scheduled to run |
| 1.3.6.1.4.1.3052.18.2.18.3.1.9 | ColumnscrArguments | read-write | current | Arguments for this script |
| 1.3.6.1.4.1.3052.18.2.18.3.1.10 | ColumnscrRepeatInterval | read-write | current | How often this script runs (minutes) |
| 1.3.6.1.4.1.3052.18.2.18.4 | TablescrVolatileStringTable | not-accessible | current | Table of volatile string settings for use in scripts. |
| 1.3.6.1.4.1.3052.18.2.18.4.1 | RowscrVolatileStringEntry | not-accessible | current | Entry for table of volatile script string settings |
| 1.3.6.1.4.1.3052.18.2.18.4.1.1 | ColumnscrVolatileStringIndex | read-only | current | Index for table of volatile script string settings |
| 1.3.6.1.4.1.3052.18.2.18.4.1.2 | ColumnscrVolatileString | read-write | current | Volatile string for use in scripts. Use this object to cache frequently-changing string values or string values that do not need to persist through reset. This… |
| 1.3.6.1.4.1.3052.18.2.18.5 | TablescrVolatileIntTable | not-accessible | current | Table of volatile integer settings for use in scripts. |
| 1.3.6.1.4.1.3052.18.2.18.5.1 | RowscrVolatileIntEntry | not-accessible | current | Entry for table of volatile script integer settings |
| 1.3.6.1.4.1.3052.18.2.18.5.1.1 | ColumnscrVolatileIntIndex | read-only | current | Index for table of volatile script integer settings |
| 1.3.6.1.4.1.3052.18.2.18.5.1.2 | ColumnscrVolatileInt | read-write | current | Volatile integer for use in scripts. Use this object to cache frequently-changing integer values or integer values that do not need to persist through reset. T… |
| 1.3.6.1.4.1.3052.18.2.18.6 | TablescrNonVolatileStringTable | not-accessible | current | Table of non-volatile string settings for use in scripts. |
| 1.3.6.1.4.1.3052.18.2.18.6.1 | RowscrNonVolatileStringEntry | not-accessible | current | Entry for table of non-volatile script string settings |
| 1.3.6.1.4.1.3052.18.2.18.6.1.1 | ColumnscrNonVolatileStringIndex | read-only | current | Index for table of non-volatile script string settings |
| 1.3.6.1.4.1.3052.18.2.18.6.1.2 | ColumnscrNonVolatileString | read-write | current | Non-volatile string for use in scripts. Use this object to store values that need to persist through reset. This object corresponds to the scripting.nvstring[]… |
| 1.3.6.1.4.1.3052.18.2.18.7 | TablescrNonVolatileIntTable | not-accessible | current | Table of non-volatile integer settings for use in scripts. |
| 1.3.6.1.4.1.3052.18.2.18.7.1 | RowscrNonVolatileIntEntry | not-accessible | current | Entry for table of non-volatile script integer settings |
| 1.3.6.1.4.1.3052.18.2.18.7.1.1 | ColumnscrNonVolatileIntIndex | read-only | current | Index for table of non-volatile script integer settings |
| 1.3.6.1.4.1.3052.18.2.18.7.1.2 | ColumnscrNonVolatileInt | read-write | current | Non-volatile integer for use in scripts. Use this object to store integer values that need to persist through reset. This object corresponds to the scripting.n… |
| 1.3.6.1.4.1.3052.43.2.2.1 | TableesPointConfigTempTable | not-accessible | current | This table organizes 3 basic attributes of temperature sensor points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in thi… |
| 1.3.6.1.4.1.3052.43.2.2.1.1 | RowesPointConfigTempEntry | not-accessible | current | Entry for EventSensor point config temperature table |
| 1.3.6.1.4.1.3052.43.2.2.1.1.1 | ColumnespcTempIndexES | read-only | current | The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the informati… |
| 1.3.6.1.4.1.3052.43.2.2.1.1.2 | ColumnespcTempIndexPoint | read-only | current | The part of the point index that delineates which sensor on the EventSensor. So this combined with espcTempIndexES (which EventSensor) uniquely defines each po… |
| 1.3.6.1.4.1.3052.43.2.2.1.1.3 | ColumnespcTempEnable | read-write | current | ON/OFF enable this temperature sensor |
| 1.3.6.1.4.1.3052.43.2.2.1.1.4 | ColumnespcTempScale | read-write | current | Scale (C/F) for this temperature sensor |
| 1.3.6.1.4.1.3052.43.2.2.1.1.5 | ColumnespcTempDeadband | read-write | current | Deadband for this temperature sensor (in floating-point format) |
| 1.3.6.1.4.1.3052.43.2.2.1.1.6 | ColumnespcTempVHighTemp | read-write | current | Very high temperature event threshold for this temperature sensor (in floating-point format) |
| 1.3.6.1.4.1.3052.43.2.2.1.1.7 | ColumnespcTempVHighActions | read-write | current | Very high temperature event actions for this temperature sensor |
| 1.3.6.1.4.1.3052.43.2.2.1.1.8 | ColumnespcTempVHighTrapnum | read-write | current | Very high temperature event trap number for this temperature sensor |
| 1.3.6.1.4.1.3052.43.2.2.1.1.9 | ColumnespcTempVHighClass | read-write | current | Very high temperature event class for this temperature sensor |
| 1.3.6.1.4.1.3052.43.2.2.1.1.10 | ColumnespcTempHighTemp | read-write | current | High temperature event threshold for this temperature sensor (in floating-point format) |
| 1.3.6.1.4.1.3052.43.2.2.1.1.11 | ColumnespcTempHighActions | read-write | current | High temperature event actions for this temperature sensor |
| 1.3.6.1.4.1.3052.43.2.2.1.1.12 | ColumnespcTempHighTrapnum | read-write | current | High temperature event trap number for this temperature sensor |
| 1.3.6.1.4.1.3052.43.2.2.1.1.13 | ColumnespcTempHighClass | read-write | current | High temperature event class for this temperature sensor |
| 1.3.6.1.4.1.3052.43.2.2.1.1.14 | ColumnespcTempNormalActions | read-write | current | Return-to-normal event actions for this temperature sensor |
| 1.3.6.1.4.1.3052.43.2.2.1.1.15 | ColumnespcTempNormalTrapnum | read-write | current | Return-to-normal event trap number for this temperature sensor |
| 1.3.6.1.4.1.3052.43.2.2.1.1.16 | ColumnespcTempNormalClass | read-write | current | Return-to-normal event class for this temperature sensor |
| 1.3.6.1.4.1.3052.43.2.2.1.1.17 | ColumnespcTempLowTemp | read-write | current | Low temperature event threshold for this temperature sensor (in floating-point format) |
| 1.3.6.1.4.1.3052.43.2.2.1.1.18 | ColumnespcTempLowActions | read-write | current | Low temperature event actions for this temperature sensor |
| 1.3.6.1.4.1.3052.43.2.2.1.1.19 | ColumnespcTempLowTrapnum | read-write | current | Low temperature event trap number for this temperature sensor |
| 1.3.6.1.4.1.3052.43.2.2.1.1.20 | ColumnespcTempLowClass | read-write | current | Low temperature event class for this temperature sensor |
| 1.3.6.1.4.1.3052.43.2.2.1.1.21 | ColumnespcTempVLowTemp | read-write | current | Very Low temperature event threshold for this temperature sensor (in floating-point format) |
| 1.3.6.1.4.1.3052.43.2.2.1.1.22 | ColumnespcTempVLowActions | read-write | current | Very Low temperature event actions for this temperature sensor |
| 1.3.6.1.4.1.3052.43.2.2.1.1.23 | ColumnespcTempVLowTrapnum | read-write | current | Very Low temperature event trap number for this temperature sensor |
| 1.3.6.1.4.1.3052.43.2.2.1.1.24 | ColumnespcTempVLowClass | read-write | current | Very Low temperature event class for this temperature sensor |
| 1.3.6.1.4.1.3052.43.2.2.2 | TableesPointConfigCCTable | not-accessible | current | This table organizes 3 basic attributes of contact closure points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this t… |
| 1.3.6.1.4.1.3052.43.2.2.2.1 | RowesPointConfigCCEntry | not-accessible | current | Entry for EventSensor point config contact closure table |
| 1.3.6.1.4.1.3052.43.2.2.2.1.1 | ColumnespcCCIndexES | read-only | current | The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the informati… |
| 1.3.6.1.4.1.3052.43.2.2.2.1.2 | ColumnespcCCIndexPoint | read-only | current | The part of the point index that delineates which sensor on the EventSensor. So this combined with espcCCIndexES (which EventSensor) uniquely defines each poin… |
| 1.3.6.1.4.1.3052.43.2.2.2.1.3 | ColumnespcCCEnable | read-write | current | ON/OFF enable for this contact closure |
| 1.3.6.1.4.1.3052.43.2.2.2.1.4 | ColumnespcCCName | read-write | current | Name for this contact closure |
| 1.3.6.1.4.1.3052.43.2.2.2.1.5 | ColumnespcCCEventState | read-write | current | Event state for this contact closure |
| 1.3.6.1.4.1.3052.43.2.2.2.1.6 | ColumnespcCCThreshold | read-write | current | Event threshold (seconds) for this contact closure |
| 1.3.6.1.4.1.3052.43.2.2.2.1.7 | ColumnespcCCEventActions | read-write | current | Event actions for this contact closure |
| 1.3.6.1.4.1.3052.43.2.2.2.1.8 | ColumnespcCCEventTrapnum | read-write | current | Event trap number for this contact closure |
| 1.3.6.1.4.1.3052.43.2.2.2.1.9 | ColumnespcCCEventClass | read-write | current | Event class for this contact closure |
| 1.3.6.1.4.1.3052.43.2.2.2.1.10 | ColumnespcCCNormalActions | read-write | current | Return-to-normal actions for this contact closure |
| 1.3.6.1.4.1.3052.43.2.2.2.1.11 | ColumnespcCCNormalTrapnum | read-write | current | Return-to-normal trap number for this contact closure |
| 1.3.6.1.4.1.3052.43.2.2.2.1.12 | ColumnespcCCNormalClass | read-write | current | Return-to-normal class for this contact closure |
| 1.3.6.1.4.1.3052.43.2.2.2.1.13 | ColumnespcCCAlarmAlias | read-write | current | Event alias for this contact closure |
| 1.3.6.1.4.1.3052.43.2.2.2.1.14 | ColumnespcCCNormalAlias | read-write | current | Return-to-normal alias for this contact closure |
| 1.3.6.1.4.1.3052.43.2.2.2.1.15 | ColumnespcCCNormalThreshold | read-write | current | Event threshold (seconds) for this contact closure to return to normal |
| 1.3.6.1.4.1.3052.43.2.2.2.1.16 | ColumnespcCCOverrideGlobalReminder | read-write | current | Override global reminder interval (evReminderInterval) for this CC. |
| 1.3.6.1.4.1.3052.43.2.2.2.1.17 | ColumnespcCCReminderInterval | read-write | current | Individual reminder interval for this CC, applicable when the global reminder is overriden. |
| 1.3.6.1.4.1.3052.43.2.2.3 | TableesPointConfigHumidTable | not-accessible | current | This table organizes 3 basic attributes of humidity points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this table ar… |
| 1.3.6.1.4.1.3052.43.2.2.3.1 | RowesPointConfigHumidEntry | not-accessible | current | Entry for EventSensor point config humidity table |
| 1.3.6.1.4.1.3052.43.2.2.3.1.1 | ColumnespcHumidIndexES | read-only | current | The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the informati… |
| 1.3.6.1.4.1.3052.43.2.2.3.1.2 | ColumnespcHumidIndexPoint | read-only | current | The part of the point index that delineates which sensor on the EventSensor. So this combined with espcHumidIndexES (which EventSensor) uniquely defines each p… |
| 1.3.6.1.4.1.3052.43.2.2.3.1.3 | ColumnespcHumidEnable | read-write | current | ON/OFF enable for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.4 | ColumnespcHumidDeadband | read-write | current | Deadband for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.5 | ColumnespcHumidVHighHumid | read-write | current | Very high event threshold for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.6 | ColumnespcHumidVHighActions | read-write | current | Very high event actions for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.7 | ColumnespcHumidVHighTrapnum | read-write | current | Very high event trap number for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.8 | ColumnespcHumidVHighClass | read-write | current | Very high event class for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.9 | ColumnespcHumidHighHumid | read-write | current | High event threshold for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.10 | ColumnespcHumidHighActions | read-write | current | High event actions for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.11 | ColumnespcHumidHighTrapnum | read-write | current | High event trap number for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.12 | ColumnespcHumidHighClass | read-write | current | High event class for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.13 | ColumnespcHumidNormalActions | read-write | current | Return-to-normal actions for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.14 | ColumnespcHumidNormalTrapnum | read-write | current | Return-to-normal trap number for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.15 | ColumnespcHumidNormalClass | read-write | current | Return-to-normal class for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.16 | ColumnespcHumidLowHumid | read-write | current | Low event threshold for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.17 | ColumnespcHumidLowActions | read-write | current | Low event actions for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.18 | ColumnespcHumidLowTrapnum | read-write | current | Low event trap number for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.19 | ColumnespcHumidLowClass | read-write | current | Low event class for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.20 | ColumnespcHumidVLowHumid | read-write | current | Very low event threshold for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.21 | ColumnespcHumidVLowActions | read-write | current | Very low event actions for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.22 | ColumnespcHumidVLowTrapnum | read-write | current | Very low event trap number for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.3.1.23 | ColumnespcHumidVLowClass | read-write | current | Very low event class for this humidity sensor |
| 1.3.6.1.4.1.3052.43.2.2.5 | TableesPointConfigAITable | not-accessible | current | This table organizes 3 basic attributes of analog input points. A point is a particular sensor on an EventSensor. The 3 point attributes organizes in this tabl… |
| 1.3.6.1.4.1.3052.43.2.2.5.1 | RowesPointConfigAIEntry | not-accessible | current | Entry for EventSensor point config analog input table |
| 1.3.6.1.4.1.3052.43.2.2.5.1.1 | ColumnespcAIIndexES | read-only | current | The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the informati… |
| 1.3.6.1.4.1.3052.43.2.2.5.1.2 | ColumnespcAIIndexPoint | read-only | current | The part of the point index that delineates which sensor on the EventSensor. So this combined with espcAIIndexES (which EventSensor) uniquely defines each poin… |
| 1.3.6.1.4.1.3052.43.2.2.5.1.3 | ColumnespcAIEnable | read-write | current | ON/OFF for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.5 | ColumnespcAIDeadband | read-write | current | Deadband for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.6 | ColumnespcAIVhighValue | read-write | current | Very high event threshold (decivolts or tenths of milliamps) for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.7 | ColumnespcAIVhighActions | read-write | current | Very high event actions for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.8 | ColumnespcAIVhighTrapnum | read-write | current | Very high event trap number for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.9 | ColumnespcAIVhighClass | read-write | current | Very high event class for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.10 | ColumnespcAIHighValue | read-write | current | High event threshold (decivolts or tenths of milliamps) for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.11 | ColumnespcAIHighActions | read-write | current | High event actions for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.12 | ColumnespcAIHighTrapnum | read-write | current | High event trap number for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.13 | ColumnespcAIHighClass | read-write | current | High event class for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.14 | ColumnespcAINormalActions | read-write | current | Return-to-normal actions for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.15 | ColumnespcAINormalTrapnum | read-write | current | Return-to-normal trap number for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.16 | ColumnespcAINormalClass | read-write | current | Return-to-normal class for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.17 | ColumnespcAILowValue | read-write | current | Low event threshold (decivolts or tenths of milliamps) for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.18 | ColumnespcAILowActions | read-write | current | Low event actions for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.19 | ColumnespcAILowTrapnum | read-write | current | Low event trap number for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.20 | ColumnespcAILowClass | read-write | current | Low event class for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.21 | ColumnespcAIVlowValue | read-write | current | Very low event threshold (decivolts or tenths of milliamps) for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.22 | ColumnespcAIVlowActions | read-write | current | Very low event actions for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.23 | ColumnespcAIVlowTrapnum | read-write | current | Very low event actions for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.24 | ColumnespcAIVlowClass | read-write | current | Very low event class for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.25 | ColumnespcAIConvUnitName | read-write | current | Converstion unit name for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.26 | ColumnespcAIConvHighValue | read-write | current | Conversion high value for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.27 | ColumnespcAIConvHighUnit | read-write | current | Conversion high unit value for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.29 | ColumnespcAIConvLowValue | read-write | current | Conversion low value for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.30 | ColumnespcAIConvLowUnit | read-write | current | Conversion unit low unit value for this analog input sensor |
| 1.3.6.1.4.1.3052.43.2.2.5.1.32 | ColumnespcAIDisplayFormat | read-write | current | Analog input display format |
| 1.3.6.1.4.1.3052.43.2.2.6 | TableesPointConfigOutputTable | not-accessible | current | This table organizes configuration items for output points. A point is a particular sensor on an EventSensor. The 3 point attributes organized in this table ar… |
| 1.3.6.1.4.1.3052.43.2.2.6.1 | RowesPointConfigOutputEntry | not-accessible | current | Entry for EventSensor point config output table |
| 1.3.6.1.4.1.3052.43.2.2.6.1.1 | ColumnespcOutputIndexES | read-only | current | The part of the point index that refers to an EventSensor. The point config index is a string of 2 numbers separated by a period. It contains all the informati… |
| 1.3.6.1.4.1.3052.43.2.2.6.1.2 | ColumnespcOutputIndexPoint | read-only | current | The part of the point index that delineates which sensor on the EventSensor. So this combined with espcOutputIndexES (which EventSensor) uniquely defines each … |
| 1.3.6.1.4.1.3052.43.2.2.6.1.3 | ColumnespcOutputEnable | read-write | current | Enables the output event for this output. This has no effect on whether the relay changes state, only on whether a state change triggers an event. |
| 1.3.6.1.4.1.3052.43.2.2.6.1.4 | ColumnespcOutputActiveState | read-write | current | Which state is considered the active state: energized/de-energized. |
| 1.3.6.1.4.1.3052.43.2.2.6.1.5 | ColumnespcOutputType | read-only | current | Output type: RELAY, POWER, SSR, TTL. |
| 1.3.6.1.4.1.3052.43.2.2.6.1.6 | ColumnespcOutputAliasValue | read-only | current | Output alias corresponding to its event state. |
| 1.3.6.1.4.1.3052.43.2.2.6.1.7 | ColumnespcOutputAliasColor | read-only | current | Output color corresponding to its event state. |
| 1.3.6.1.4.1.3052.43.2.2.6.1.10 | ColumnespcOutputActiveAlias | read-write | current | Alias for the output active state. |
| 1.3.6.1.4.1.3052.43.2.2.6.1.11 | ColumnespcOutputActiveColor | read-write | current | Output color (as rendered in the web UI, in RGB hex format) corresponding to the output active state. |
| 1.3.6.1.4.1.3052.43.2.2.6.1.12 | ColumnespcOutputActiveActions | read-write | current | Actions for the output active event. |
| 1.3.6.1.4.1.3052.43.2.2.6.1.13 | ColumnespcOutputActiveTrapnum | read-write | current | Actions for the output active event. |
| 1.3.6.1.4.1.3052.43.2.2.6.1.14 | ColumnespcOutputActiveClass | read-write | current | Class (severity) for the output active event. |
| 1.3.6.1.4.1.3052.43.2.2.6.1.20 | ColumnespcOutputInactiveAlias | read-write | current | Alias for the output inactive state. |
| 1.3.6.1.4.1.3052.43.2.2.6.1.21 | ColumnespcOutputInactiveColor | read-write | current | Output color (as rendered in the web UI, in RGB hex format) corresponding to the output inactive state. |
| 1.3.6.1.4.1.3052.43.2.2.6.1.22 | ColumnespcOutputInactiveActions | read-write | current | Actions for the output inactive event. |
| 1.3.6.1.4.1.3052.43.2.2.6.1.23 | ColumnespcOutputInactiveTrapnum | read-write | current | Actions for the output inactive event. |
| 1.3.6.1.4.1.3052.43.2.2.6.1.24 | ColumnespcOutputInactiveClass | read-write | current | Class (severity) for the output inactive event. |
| 1.3.6.1.4.1.3699.1.1.11.1.1.1.1 | ScalarsysTimeAutoDST | read-write | current | ON/OFF automatically adjust for Daylight Savings Time |
| 1.3.6.1.4.1.3699.1.1.11.1.1.1.2 | ScalarsysTimeGMTOffset | read-write | current | Absolute value of offset (hours) from GMT of the timezone |
| 1.3.6.1.4.1.3699.1.1.11.1.1.1.3 | ScalarsysTimeGMTDirection | read-write | current | Direction (AHEAD/BEHIND) of timezone relative to GMT |
| 1.3.6.1.4.1.5454.1.80.2.1 | ScalarmodemFormat | read-write | current | Modem data format (8N1,7E1,7O1,7N1) |
| 1.3.6.1.4.1.5454.1.80.2.2 | ScalarmodemInitString | read-write | current | Init string for modem |
| 1.3.6.1.4.1.5454.1.80.2.4 | ScalarmodemCallAttempts | read-write | current | Max mumber of times the modem should try to call out until successful connect |
| 1.3.6.1.4.1.5454.1.80.2.5 | ScalarmodemCallDelay | read-write | current | Minimum delay (seconds) between callouts |
| 1.3.6.1.4.1.5454.1.80.2.6 | ScalarmodemCmdTimout | read-write | current | Number of minutes after which an idle command session via modem is terminated |
| 1.3.6.1.4.1.5454.1.80.2.7 | ScalarmodemGoto | read-write | current | When a user connects, where that user is routed (command session, passthrough to port 1, passthrough to port 2, etc.) |
| 1.3.6.1.4.1.5454.1.80.2.9 | ScalarmodemTAPInitString | read-write | current | Init string to use for TAP (pager) connections |
| 1.3.6.1.4.1.5454.1.80.2.10 | ScalarmodemTAP8N1 | read-write | current | ON/OFF: use 8N1 data/parity/stop for TAP connections |
| 1.3.6.1.4.1.5951.1.14.1 | TablecpeTable | not-accessible | current | Table of CPEs |
| 1.3.6.1.4.1.5951.1.14.1.1 | RowcpeEntry | not-accessible | current | Entry for table of CPEs |
| 1.3.6.1.4.1.5951.1.14.1.1.1 | ColumncpeIndex | read-only | current | Index for table of CPEs |
| 1.3.6.1.4.1.5951.1.14.1.1.2 | ColumncpeHost | read-write | current | CPE host (IP address or DNS name) |
| 1.3.6.1.4.1.5951.1.14.1.1.3 | ColumncpeName | read-write | current | CPE name, informational only |
| 1.3.6.1.4.1.5951.1.14.1.1.4 | ColumncpeDescription | read-write | current | CPE description, informational only |
| 1.3.6.1.4.1.5951.1.14.1.1.5 | ColumncpeKeepalive | read-write | current | Number of seconds between each successful ping request. |
| 1.3.6.1.4.1.5951.1.14.1.1.6 | ColumncpeThreshold | read-write | current | Number of unsuccessful pings that triggers the CPE event. |
| 1.3.6.1.4.1.5951.1.14.1.1.7 | ColumncpeEventReminderInterval | read-write | current | CPE event reminder interval (minutes). |
| 1.3.6.1.4.1.5951.1.14.1.1.20 | ColumncpeKeepaliveTicks | read-write | current | CPE ping period in 16ths of a second (nonzero overrides keepalive). |
| 1.3.6.1.4.1.5951.1.14.1.1.21 | ColumncpePingSize | read-write | current | Number of bytes in CPE ping payload |
| 1.3.6.1.4.1.5951.1.14.1.1.30 | ColumncpeInfoReset | read-only | current | Set any number to reset CPE ping stats. |
| 1.3.6.1.4.1.5951.1.14.1.1.31 | ColumncpeInfoNumReq | read-only | current | Total number of requests transmitted. |
| 1.3.6.1.4.1.5951.1.14.1.1.32 | ColumncpeInfoNumGoodResp | read-only | current | Total number of non-corrupt responses. |
| 1.3.6.1.4.1.5951.1.14.1.1.33 | ColumncpeInfoNumBadResp | read-only | current | Total number of corrupt responses. |
| 1.3.6.1.4.1.5951.1.14.1.1.34 | ColumncpeInfoNumLostResp | read-only | current | Total number of requests with no response. |
| 1.3.6.1.4.1.5951.1.14.1.1.35 | ColumncpeInfoPercentLoss | read-only | current | Percent loss (missing responses / total requests). |
| 1.3.6.1.4.1.5951.1.14.1.1.36 | ColumncpeInfoPercentBad | read-only | current | Percent corrupt (corrupt responses / total requests). |
| 1.3.6.1.4.1.17471.1.1.3.1.1 | ScalaremailServer | read-write | current | SMTP server to which the unit sends email |
| 1.3.6.1.4.1.17471.1.1.3.1.2 | ScalaremailDomain | read-write | current | Domain to use in recipient address |
| 1.3.6.1.4.1.17471.1.1.3.1.3 | ScalaremailAuthEnable | read-write | current | ON/OFF enable SMTP authentication |
| 1.3.6.1.4.1.17713.21.3.16.1 | ScalarpppRoutingEnable | read-write | current | ON/OFF unit routes IP traffic from PPP/Wireless to Ethernet |
| 1.3.6.1.4.1.17713.21.3.16.2 | ScalarethRoutingEnable | read-write | current | ON/OFF unit routes IP traffic from Ethernet to PPP/Wireless |
| 1.3.6.1.4.1.17713.21.3.16.3 | ScalarethRoutingNATEnable | read-write | current | ON/OFF unit applies NAT on routed IP frames egressing the unit on its PPP interface |
| 1.3.6.1.4.1.17713.21.3.16.4 | ScalarroutingInterface | read-write | current | When Ethernet routing is enabled (routing.1), this is the Ethernet interface to which IP frames received on PPP are routed |
| 1.3.6.1.4.1.17713.21.3.16.5 | Scalareth2WanRoutingEnable | read-write | current | Make ETH2 operate as a WAN port to route outbound traffic arriving on ETH1. |
| 1.3.6.1.4.1.21317.1.21.2 | ScalardefaultRouter | read-write | current | The default router/gateway |
| 1.3.6.1.4.1.21317.1.21.3 | TablednsTable | not-accessible | current | DNS server address table |
| 1.3.6.1.4.1.21317.1.21.3.1 | RowdnsEntry | not-accessible | current | DNS server address entry |
| 1.3.6.1.4.1.21317.1.21.3.1.1 | ColumndnsIndex | read-only | current | Index for DNS server address |
| 1.3.6.1.4.1.21317.1.21.3.1.2 | ColumndnsAddress | read-write | current | DNS server address |
| 1.3.6.1.4.1.21317.1.21.4 | Scalarhostname | read-write | current | The hostname of the unit |
| 1.3.6.1.4.1.21317.1.21.5 | TablehostTable | not-accessible | current | Static host table |
| 1.3.6.1.4.1.21317.1.21.5.1 | RowhostEntry | not-accessible | current | Static host entry |
| 1.3.6.1.4.1.21317.1.21.5.1.1 | ColumnhostIndex | read-only | current | Index for static host |
| 1.3.6.1.4.1.21317.1.21.5.1.2 | ColumnhostDeclaration | read-write | current | Static host declaration string (i.e. 'address hostname') |
| 1.3.6.1.4.1.21317.1.21.6 | ScalarncpDuplex | read-write | current | For network command processor: 1=Input characters are echoed; 0=no echo. |
| 1.3.6.1.4.1.21317.1.21.7 | ScalarncpTimeout | read-write | current | Network command processor inactivity timeout |
| 1.3.6.1.4.1.23937.2.3.1.15.1 | TablertsFileTable | not-accessible | current | Table of RTS files |
| 1.3.6.1.4.1.23937.2.3.1.15.1.1 | RowrtsFileEntry | not-accessible | current | Entry for table of RTS files |
| 1.3.6.1.4.1.23937.2.3.1.15.1.1.1 | ColumnrtsFileIndex | read-only | current | Index for table of RTS files |
| 1.3.6.1.4.1.23937.2.3.1.15.1.1.2 | ColumnrtsFileMode | read-write | current | RTS mode (OFF,LISTEN,PUSH) for FILEx |
| 1.3.6.1.4.1.23937.2.3.1.15.1.1.3 | ColumnrtsFileShowAnswer | read-write | current | Show answer string upon RTS connect for FILEx |
| 1.3.6.1.4.1.23937.2.3.1.15.1.1.4 | ColumnrtsFileReqXON | read-write | current | ON/OFF require XON to start flow for FILEx |
| 1.3.6.1.4.1.23937.2.3.1.15.1.1.5 | ColumnrtsFileTimeout | read-write | current | Idle connection close timer (0 means no timeout) for FILEx |
| 1.3.6.1.4.1.23937.2.3.1.15.1.1.6 | ColumnrtsFileEmptyClose | read-write | current | ON/OFF close the socket when FILEx is empty |
| 1.3.6.1.4.1.23937.2.3.1.15.1.1.7 | ColumnrtsFilePushHost | read-write | current | Host to which FILEx should be pushed via RTS |
| 1.3.6.1.4.1.23937.2.3.1.15.1.1.8 | ColumnrtsFilePushPort | read-write | current | TCP port to which FILEx should be pushed via RTS |
| 1.3.6.1.4.1.23937.2.3.1.15.1.1.9 | ColumnrtsFilePushRetryTimer | read-write | current | Retry timer (seconds) for retrying failed RTS push connect attempts |
| 1.3.6.1.4.1.37963.1.1.27.1 | Scalarclock | read-write | current | Text string for date and time; e.g. 'SUN 01/02/98 12:34:27'. When setting this object, only the date and time are required; the unit will ignore a specified da… |
| 1.3.6.1.4.1.40083.5.7 | TableevShskLowTable | not-accessible | current | Table of serial handshaking low events |
| 1.3.6.1.4.1.40083.5.7.1 | RowevShskLowEntry | not-accessible | current | Entry for table of serial handshaking low events |
| 1.3.6.1.4.1.40083.5.7.1.1 | ColumnevShskLowIndex | read-only | current | Index for table of serial handshaking low events |
| 1.3.6.1.4.1.40083.5.7.1.2 | ColumnevShskLowEnable | read-write | current | ON/OFF: enable the serial handshaking low event for this port |
| 1.3.6.1.4.1.40083.5.7.1.3 | ColumnevShskLowActions | read-write | current | Actions for the serial handshaking low event for this port |
| 1.3.6.1.4.1.40083.5.7.1.4 | ColumnevShskLowMessage | read-write | current | Message for the serial handshaking low event for this port |
| 1.3.6.1.4.1.40083.5.7.1.5 | ColumnevShskLowClass | read-write | current | Class for the serial handshaking low event for this port |
| 1.3.6.1.4.1.40083.5.7.1.6 | ColumnevShskLowTrapNum | read-write | current | Trap number for the serial handshaking low event for this port |
| 1.3.6.1.4.1.40083.5.8 | TableevShskHighTable | not-accessible | current | Table of serial handshaking high events |
| 1.3.6.1.4.1.40083.5.8.1 | RowevShskHighEntry | not-accessible | current | Entry for table of serial handshaking high events |
| 1.3.6.1.4.1.40083.5.8.1.1 | ColumnevShskHighIndex | read-only | current | Index for table of serial handshaking high events |
| 1.3.6.1.4.1.40083.5.8.1.2 | ColumnevShskHighEnable | read-write | current | ON/OFF: enable the serial handshaking high event for this port |
| 1.3.6.1.4.1.40083.5.8.1.3 | ColumnevShskHighActions | read-write | current | Actions for the serial handshaking high event for this port |
| 1.3.6.1.4.1.40083.5.8.1.4 | ColumnevShskHighMessage | read-write | current | Message for the serial handshaking high event for this port |
| 1.3.6.1.4.1.40083.5.8.1.5 | ColumnevShskHighClass | read-write | current | Class for the serial handshaking high event for this port |
| 1.3.6.1.4.1.40083.5.8.1.6 | ColumnevShskHighTrapNum | read-write | current | Trap number for the serial handshaking high event for this port |
| 1.3.6.1.4.1.41010.1.9.1 | ScalarsnmpAgentEnable | read-write | current | ON/OFF for snmp agent |
| 1.3.6.1.4.1.41010.1.9.5 | ScalarsnmpNotificationCaptureEnable | read-write | current | ON/OFF unit receives and stores SNMP traps/informs |
| 1.3.6.1.4.1.41010.1.9.6 | ScalarsnmpNotificationCaptureFile | read-write | current | File to which unit stores received SNMP traps/informs |