SL-ALS-MIB
18 objects
This MIB module describes the SiteLight ALS feature.
Imported Objects
| IF-MIB | ifIndex InterfaceIndex |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount PerfTotalCount |
| SL-NE-MIB | sitelight |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4515.1.12 | IdentityslAlsMib | This MIB module describes the SiteLight ALS feature. | ||
| 1.3.6.1.4.1.4515.1.12.1 | NodeslAlsConfig | |||
| 1.3.6.1.4.1.4515.1.12.1.1 | TableslAlsConfigTable | not-accessible | current | The ALS configuration Table. |
| 1.3.6.1.4.1.4515.1.12.1.1.1 | RowslAlsConfigEntry | not-accessible | current | The entries exist for active optical inetfaces ifType = 196. The objects in this table are used to configure the ALS algorithm. |
| 1.3.6.1.4.1.4515.1.12.1.1.1.1 | ColumnslAlsMode | read-write | current | Enable/Disable the ALS algorithm. When the Laser Admin Status is 'down' the ALS not operational. |
| 1.3.6.1.4.1.4515.1.12.1.1.1.2 | ColumnslAlsLosDeclareTime | read-write | current | Time to declare optical LOS present or clear |
| 1.3.6.1.4.1.4515.1.12.1.1.1.3 | ColumnslAlsTestPulseTime | read-write | current | Manual restart for test Pulse time (in manual restart) - 90+-10 sec. |
| 1.3.6.1.4.1.4515.1.12.1.1.1.4 | ColumnslAlsManualPulseTime | read-write | current | |
| 1.3.6.1.4.1.4515.1.12.1.1.1.5 | ColumnslAlsAutomaticPulseTime | read-write | current | |
| 1.3.6.1.4.1.4515.1.12.1.1.1.6 | ColumnslAlsAutomaticDelayTime | read-write | current | In Automatic mode. The delay between two laser re-activations. |
| 1.3.6.1.4.1.4515.1.12.1.1.1.7 | ColumnslAlsLaserTestActivate | read-write | current | Activate the laser for test operation. |
| 1.3.6.1.4.1.4515.1.12.1.1.1.8 | ColumnslAlsLaserManualActivate | read-write | current | Activate the laser manual operation. |
| 1.3.6.1.4.1.4515.1.12.1.1.1.9 | ColumnslAlsOperStatus | read-only | current | The operational status of the ALS algorithm. When the Laser Admin Status is 'down' the ALS not operational. |
| 1.3.6.1.4.1.4515.1.12.1.1.1.10 | ColumnslAlsResetParams | read-write | current | Setting this variable to 1 will reset the ALS parameters to the factory defaults. |
| 1.3.6.1.4.1.4515.1.12.2 | NodeslAlsTraps | |||
| 1.3.6.1.4.1.4515.1.12.2.1 | NotificationslAlsStatusChangeTrap | current | A slAlsStatusChangeTrap is sent when the TX laser status is changed. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlsAutomaticPulseTimeType | INTEGER { ms1750(1), ms2000(2), ms2250(3) } | current | Automatic restart Pulse time (in automatic mode) - 2+-0.25 sec. |
| AlsManualPulseTimeType | INTEGER { ms1750(1), ms2000(2), ms2250(3) } | current | Manual restart Pulse time (in manual mode) - 2+-0.25 sec. |