SL-DRY-CON-MIB
21 objects
This MIB module describes the Dry Contacts.
Imported Objects
| IF-MIB | ifIndex InterfaceIndex |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount PerfTotalCount |
| SL-NE-MIB | sitelight |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4515.1.7 | IdentityslDryConMib | This MIB module describes the Dry Contacts. | ||
| 1.3.6.1.4.1.4515.1.7.1 | NodeslDryConOut | |||
| 1.3.6.1.4.1.4515.1.7.1.1 | ScalarslDryConAlarmCutoff | read-write | current | Setting this variable cause to Alarms Cutoff. |
| 1.3.6.1.4.1.4515.1.7.1.2 | TableslDryConOutTable | not-accessible | current | The Dry Contact Out table configure the dry contact outputs. |
| 1.3.6.1.4.1.4515.1.7.1.2.1 | RowslDryConOutEntry | not-accessible | current | There is an entry for each Output Dry Contact |
| 1.3.6.1.4.1.4515.1.7.1.2.1.1 | ColumnslDryConOutIndex | read-only | current | The index of the output dry contact. |
| 1.3.6.1.4.1.4515.1.7.1.2.1.2 | ColumnslDryConOutCommand | read-write | current | Setting this object controls the output dry contact state: activate(1) - activate the output dry contact deactivate(2) - dectivate the output dry contact clear… |
| 1.3.6.1.4.1.4515.1.7.1.2.1.3 | ColumnslDryConOutActiveStatus | read-only | current | The current status of the output dry contact: TRUE - means that it is currently active FLASE - means that it is not active |
| 1.3.6.1.4.1.4515.1.7.2 | NodeslDryConIn | |||
| 1.3.6.1.4.1.4515.1.7.2.1 | ScalarslDryConLastChange | read-only | current | The Sys Uptime at the last input change. |
| 1.3.6.1.4.1.4515.1.7.2.2 | TableslDryConInTable | not-accessible | current | The Dry Contact In table describes the dry contacts inputs. |
| 1.3.6.1.4.1.4515.1.7.2.2.1 | RowslDryConInEntry | not-accessible | current | There is an entry for each Input Dry Contact |
| 1.3.6.1.4.1.4515.1.7.2.2.1.1 | ColumnslDryConInIndex | read-only | current | The index of the input dry contact. |
| 1.3.6.1.4.1.4515.1.7.2.2.1.2 | ColumnslDryConInDescription | read-write | current | A textual description of the input dry contact alarm. |
| 1.3.6.1.4.1.4515.1.7.2.2.1.3 | ColumnslDryConInSeverity | read-write | current | A severity of the input dry contact alarm. |
| 1.3.6.1.4.1.4515.1.7.2.2.1.4 | ColumnslDryConInEnable | read-write | current | Enable/Disable the input dry contact alarm report generation. |
| 1.3.6.1.4.1.4515.1.7.2.2.1.5 | ColumnslDryConInPolarity | read-write | current | Determines the input dry contact alarm polarity. |
| 1.3.6.1.4.1.4515.1.7.2.2.1.6 | ColumnslDryConInStatus | read-only | current | Describe the current input dry contact alarm status. |
| 1.3.6.1.4.1.4515.1.7.2.2.1.7 | ColumnslDryConInAlmType | read-write | current | Describe the current input dry contact alarm type. |
| 1.3.6.1.4.1.4515.1.7.3 | NodeslDryConTraps | |||
| 1.3.6.1.4.1.4515.1.7.3.1 | NotificationslDryConStatusChangeTrap | current | An slDryConStatusChangeTrap notification is sent when the the Status of an input dry contact is changed and the corresponding alarm is enabled. In order to sho… |