SL-MAIN-MIB
130 objects
This MIB module describes the Main Board
Imported Objects
| IF-MIB | InterfaceIndex |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount PerfTotalCount |
| SL-NE-MIB | sitelight |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Opaque TimeTicks |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4515.1.3 | IdentityslMain | This MIB module describes the Main Board | ||
| 1.3.6.1.4.1.4515.1.3.1 | NodeslmSys | |||
| 1.3.6.1.4.1.4515.1.3.1.1 | ScalarslmSysGatewayAddr | read-write | current | Gateway node IP Address. |
| 1.3.6.1.4.1.4515.1.3.1.2 | ScalarslmSysSubnetMask | read-write | current | Subnetwork Mask IP Address. |
| 1.3.6.1.4.1.4515.1.3.1.3 | ScalarslmSysIpAddr | read-write | current | Node IP Address. |
| 1.3.6.1.4.1.4515.1.3.1.4 | ScalarslmSysAlmAct | read-write | current | Alarm Activation Time specified in Half-Seconds units. Alarm will be considered active only if it has been stable for that time. |
| 1.3.6.1.4.1.4515.1.3.1.5 | ScalarslmSysAlmDeact | read-write | current | Alarm Clearance Time specified in Half-Seconds units. Alarm will be considered clear only if it has been stable for that time. |
| 1.3.6.1.4.1.4515.1.3.1.6 | ScalarslmSysAdminStatus | read-write | current | Instruct the system to perform the boot according to the specified type. |
| 1.3.6.1.4.1.4515.1.3.1.7 | ScalarslmSysOperStatus | read-only | current | The operational system state. |
| 1.3.6.1.4.1.4515.1.3.1.8 | ScalarslmBoxSize | read-only | current | The box size as was configured in the SEEP. |
| 1.3.6.1.4.1.4515.1.3.1.9 | ScalarslmSysCalendarTime | read-write | current | The system calendar time. |
| 1.3.6.1.4.1.4515.1.3.1.10 | ScalarslmSysPmStartOfDay | read-write | current | The time of day that marks the beginning of each 1-day interval used in the performance monitoring parameters for all interfaces in the NE. This time is on an … |
| 1.3.6.1.4.1.4515.1.3.1.11 | ScalarslmSysActiveSwVersion | read-write | current | Determines the active software version. This is the version that will be loaded by rebooted cards. It is not legal to set this object to the id of an illegal s… |
| 1.3.6.1.4.1.4515.1.3.1.12 | TableslmSwRevTable | not-accessible | current | This table keeps the information about the system software revisions. |
| 1.3.6.1.4.1.4515.1.3.1.12.1 | RowslmSwRevEntry | not-accessible | current | An entry exist per system revsion type (A or B). |
| 1.3.6.1.4.1.4515.1.3.1.12.1.1 | ColumnslmSwRevDirectory | read-only | current | The directory name A or B of this system software revision. |
| 1.3.6.1.4.1.4515.1.3.1.12.1.2 | ColumnslmSwRevStatus | read-only | current | The status of the system software directory content. The value valid(1) means that the data of this entry is valid and that the software is loaded correctly an… |
| 1.3.6.1.4.1.4515.1.3.1.12.1.3 | ColumnslmSwRevName | read-only | current | The identification string of the system software revision. This value is taken from the content of the system software configuration data that is downloded wit… |
| 1.3.6.1.4.1.4515.1.3.1.12.1.4 | ColumnslmSwRevDate | read-only | current | The release date of the system software revision. This value is taken from the content of the system software configuration data that is downloded with the res… |
| 1.3.6.1.4.1.4515.1.3.1.13 | ScalarslmConfigSysUptime | read-only | current | The number of timer ticks at the last configuration command. |
| 1.3.6.1.4.1.4515.1.3.1.14 | ScalarslmConfigSysSignalType | read-write | current | This variable identifies whether a SONET or a SDH signal is used across this node. This value is configured by the NMS. |
| 1.3.6.1.4.1.4515.1.3.1.16 | ScalarslmRebootDelay | read-write | current | The number of seconds to wait before reboot. When this number equal to 0 the reboot should occur immediately. After the reboot command is initiated, the value … |
| 1.3.6.1.4.1.4515.1.3.1.17 | ScalarslmVcatDelay | read-only | current | The value of the VCAT delay as was read from the SEEP. |
| 1.3.6.1.4.1.4515.1.3.1.18 | ScalarslmTid | read-write | current | The SL TL1 name. |
| 1.3.6.1.4.1.4515.1.3.1.19 | ScalarslmPsuNumber | read-write | current | Let the NMS to configure the number of PSU in the system. If this number mismatch the reality, a mismatch alarm is declared. |
| 1.3.6.1.4.1.4515.1.3.1.20 | ScalarslmOemType | read-only | current | This value tells the NMS the type of the OEM. This value is read from the SEEP. |
| 1.3.6.1.4.1.4515.1.3.1.21 | ScalarslmSysName | read-only | current | This value is the shadow of the sysName object. |
| 1.3.6.1.4.1.4515.1.3.1.22 | ScalarslmSysLocation | read-only | current | This value is the shadow of the sysLocation object. |
| 1.3.6.1.4.1.4515.1.3.1.23 | ScalarslmSysResetPm | read-write | current | Writing 1 to this object reset the system PM counters. |
| 1.3.6.1.4.1.4515.1.3.1.24 | ScalarslmSysUplinkRate | read-write | current | This object is used to configure the rate of the Uplink. The configured rate applies to both Uplink ports. |
| 1.3.6.1.4.1.4515.1.3.1.25 | ScalarslmSysChassisId | read-write | current | This object is used to configure the chassis-id. Node with the same value are considered to be stacked. |
| 1.3.6.1.4.1.4515.1.3.1.26 | ScalarslmSysNetworkPrefix | read-write | current | This object is used to configure the Network Prefix. The prefix is used when the IP address of the node is assigned automatically. The automatic IP address of … |
| 1.3.6.1.4.1.4515.1.3.1.27 | ScalarslmSysLanIpAddr | read-write | current | Node LAN IP Address. |
| 1.3.6.1.4.1.4515.1.3.1.28 | ScalarslmSysLanSubnetAddr | read-write | current | Node LAN Subnet Address. |
| 1.3.6.1.4.1.4515.1.3.1.29 | ScalarslmPmAvailable | read-only | current | This value tells the NMS if the PM support is available. The value is taken from the SEEP and can not be changed. |
| 1.3.6.1.4.1.4515.1.3.1.30 | ScalarslmPortsNumber | read-only | current | The number of ports in the system. The value is taken from the SEEP. |
| 1.3.6.1.4.1.4515.1.3.1.31 | ScalarslmEdfaNumber | read-only | current | The number of EDFA units in the system. The value is taken from the SEEP. |
| 1.3.6.1.4.1.4515.1.3.1.32 | ScalarslmMuxNumber | read-only | current | The number of MUX units in the system. The value is taken from the SEEP. |
| 1.3.6.1.4.1.4515.1.3.1.33 | ScalarslmOpticalSwitchExist | read-only | current | Should an Optical Switch unit exist in the system. The value is taken from the SEEP. |
| 1.3.6.1.4.1.4515.1.3.1.34 | ScalarslmReadCommunity | read-write | current | The SNMP read-only community. This object should be accessible only by the Admin users of the Web. |
| 1.3.6.1.4.1.4515.1.3.1.35 | ScalarslmWriteCommunity | read-write | current | The SNMP read-write community. This object should be accessible only by the Admin users of the Web. |
| 1.3.6.1.4.1.4515.1.3.1.36 | ScalarslmSysEffectiveSubnetMask | read-only | current | Effective Management subnetwork mask IP Address. |
| 1.3.6.1.4.1.4515.1.3.1.37 | ScalarslmSysEffectiveIpAddr | read-only | current | Effective Management IP Address. |
| 1.3.6.1.4.1.4515.1.3.1.38 | ScalarslmSysLanEffectiveIpAddr | read-only | current | Effective LAN IP Address. |
| 1.3.6.1.4.1.4515.1.3.1.39 | ScalarslmSysLanEffectiveSubnetAddr | read-only | current | Effective LAN subnetwork mask address. |
| 1.3.6.1.4.1.4515.1.3.1.40 | ScalarslmSysGatewayEffectiveIpAddr | read-only | current | Effective Gateway IP Address. |
| 1.3.6.1.4.1.4515.1.3.1.41 | ScalarslmSysMode | read-write | current | System Mode configuration (this object applies to muxponder). |
| 1.3.6.1.4.1.4515.1.3.1.42 | ScalarslmSysTrapFormat | read-write | current | The format of the sent trap: 1 - the full ifIndex is sent. 2 - only the port number part of the ifIndex is sent. |
| 1.3.6.1.4.1.4515.1.3.1.43 | ScalarslmSysTemperature | read-only | current | The temperature of the PL device in Celsius. |
| 1.3.6.1.4.1.4515.1.3.1.44 | ScalarslmNetworkMode | read-write | current | 1 - means that the LAN is define on a different vlan than the L2 Inband. 2 - means that the LAN is on the same vlan and the MNG ports |
| 1.3.6.1.4.1.4515.1.3.1.45 | Scalarslm40GConf | read-write | current | g40(0) - No 40G ports (service ports 3..10 are disabled) g41(1) - Single 40G Port 1 (service ports 7,8,9,10 are disabled) g42(2) - Single 40G Port 2 (service p… |
| 1.3.6.1.4.1.4515.1.3.1.46 | ScalarslmRstpEnabled | read-write | current | Enable/Disable the RSTP protocol. Defalut value is TRUE. |
| 1.3.6.1.4.1.4515.1.3.1.47 | ScalarslmTopologyEnabled | read-write | current | Enable/Disable the topology discovery protocol. Defalut value is TRUE. |
| 1.3.6.1.4.1.4515.1.3.1.48 | ScalarslmAdminCommunity | read-write | current | The SNMP admin community. This object should be accessible only by the Admin users of the Web. |
| 1.3.6.1.4.1.4515.1.3.1.49 | ScalarslmTrapCommunity | read-write | current | The SNMP v1/v2c trap community. This object should be accessible only by the Admin users of the Web. |
| 1.3.6.1.4.1.4515.1.3.1.50 | ScalarslmSysSnmpVersion | read-write | current | The format of the sent trap: 3 - allow only SNMPv3 pdus. 4 - allow all pdus (coexistance mode). |
| 1.3.6.1.4.1.4515.1.3.1.51 | ScalarslmSysEncryptionCapability | read-only | current | The encryption capability: 1 - No Encryption. 2 - Encryption Supported. |
| 1.3.6.1.4.1.4515.1.3.1.52 | ScalarslmSysMaxExpirationTime | read-write | current | The maximal GUI and CLI session expiration time in seconds. |
| 1.3.6.1.4.1.4515.1.3.1.53 | ScalarslmInbandMode | read-write | current | 1 - L2 Inband: IP over Ethernet (default). 2 - L3 Inband: IP over PPP over Ethernet |
| 1.3.6.1.4.1.4515.1.3.1.54 | ScalarslmPublicCommunity | read-write | current | The public community string. Default is public. |
| 1.3.6.1.4.1.4515.1.3.1.55 | ScalarslmSysLogMessageLevel | read-write | current | The level of logging messages. 0 - None 1 - Fatal 2 - Traps 3 - Detailed 4 - debug |
| 1.3.6.1.4.1.4515.1.3.2 | NodeslmAdmin | |||
| 1.3.6.1.4.1.4515.1.3.2.1 | TableslmAdminTable | not-accessible | current | The admin table is used to supply the access level for the user login. |
| 1.3.6.1.4.1.4515.1.3.2.1.1 | RowslmAdminEntry | not-accessible | current | An entry exist per user. |
| 1.3.6.1.4.1.4515.1.3.2.1.1.3 | ColumnslmAdminLogin | read-create | current | The user login. |
| 1.3.6.1.4.1.4515.1.3.2.1.1.4 | ColumnslmAdminPassword | read-create | current | The user password. |
| 1.3.6.1.4.1.4515.1.3.2.1.1.5 | ColumnslmAdminRowStatus | read-create | current | This object is used to create and delete rows in the slmAdminTable. |
| 1.3.6.1.4.1.4515.1.3.2.1.1.6 | ColumnslmAdminAccess | read-create | current | The user access level. |
| 1.3.6.1.4.1.4515.1.3.2.1.1.7 | ColumnslmSnmpv3Auth | read-create | current | The user SNMP v3 authentication mode. |
| 1.3.6.1.4.1.4515.1.3.2.1.1.8 | ColumnslmSnmpv3Priv | read-create | current | The user SNMP v3 privacy mode. |
| 1.3.6.1.4.1.4515.1.3.2.1.1.9 | ColumnslmSnmpv3Password | read-create | current | The SNMP v3 Password |
| 1.3.6.1.4.1.4515.1.3.3 | NodeslmAuth | |||
| 1.3.6.1.4.1.4515.1.3.3.1 | TableslmAuthTable | not-accessible | current | The authentication table is used for creating authentication requests. |
| 1.3.6.1.4.1.4515.1.3.3.1.1 | RowslmAuthEntry | not-accessible | current | The entry is used to compute the slmAuthCommunity based on the indexes Login and Password. Note that the table contains no data, and when using GetNext it apea… |
| 1.3.6.1.4.1.4515.1.3.3.1.1.1 | ColumnslmAuthLogin | not-accessible | current | The user login. |
| 1.3.6.1.4.1.4515.1.3.3.1.1.2 | ColumnslmAuthPassword | not-accessible | current | The user password. |
| 1.3.6.1.4.1.4515.1.3.3.1.1.3 | ColumnslmAuthCommunity | read-only | current | The user community name correponds to slmAuthLogin and slmAuthPassword and which defines user'a access scope. The value of this object is available for reading… |
| 1.3.6.1.4.1.4515.1.3.4 | NodeslmLogin | |||
| 1.3.6.1.4.1.4515.1.3.5 | NodeslmTrap | |||
| 1.3.6.1.4.1.4515.1.3.5.1 | TableslmTrapDestTable | not-accessible | current | A list of trap destination entries. |
| 1.3.6.1.4.1.4515.1.3.5.1.1 | RowslmTrapDestEntry | not-accessible | current | This entry includes a destination IP address to which to send traps for this community. An entry in the table is created by the NMS. In order to keep the entry… |
| 1.3.6.1.4.1.4515.1.3.5.1.1.1 | ColumnslmTrapDestAddress | read-create | current | A copy of slmTrapDestIpAddress represented as an integer. Needed due to VxWorks failure to handle an ip address as a table index. |
| 1.3.6.1.4.1.4515.1.3.5.1.1.2 | ColumnslmTrapDestRowStatus | read-create | current | This object is used to create and delete rows in the trapDestTable. |
| 1.3.6.1.4.1.4515.1.3.5.1.1.3 | ColumnslmTrapDestCommunity | read-create | current | A community to which this destination address belongs. This entry is associated with any eventEntries in the RMON MIB whose value of eventCommunity is equal to… |
| 1.3.6.1.4.1.4515.1.3.5.1.1.4 | ColumnslmTrapDestProtVersion | read-create | current | The SNMP version of the traps which this manager expects to receive. |
| 1.3.6.1.4.1.4515.1.3.5.1.1.5 | ColumnslmTrapUserLogin | read-create | current | The user login. This is used to describe to the manager the current active login sessions. The NMS should read this value periodicaly in order to refresh its e… |
| 1.3.6.1.4.1.4515.1.3.5.1.1.6 | ColumnslmTrapUserAccess | read-create | current | The user access. |
| 1.3.6.1.4.1.4515.1.3.5.1.1.7 | ColumnslmTrapEnable | read-create | current | TRUE - means that that the alarms are allowed. FALSE - means that all alarms should not be sent for this session. |
| 1.3.6.1.4.1.4515.1.3.5.1.1.8 | ColumnslmTrapPort | read-create | current | The destination port for to send the trap. The default value is 162. |
| 1.3.6.1.4.1.4515.1.3.5.1.1.9 | ColumnslmTrapDestIpAddress | read-create | current | The address to send traps on behalf of this entry. This object may not be modified if the associated slmTrapDestStatus object is equal to active(1). |
| 1.3.6.1.4.1.4515.1.3.5.2 | TableslmTrapLogTable | not-accessible | current | A list of trap log entries. |
| 1.3.6.1.4.1.4515.1.3.5.2.1 | RowslmTrapLogEntry | not-accessible | current | An entry in the table keeps the log of a single trap. |
| 1.3.6.1.4.1.4515.1.3.5.2.1.1 | ColumnslmTrapLogId | read-only | current | The trap log id. The id increments each time a new log entry arrives. |
| 1.3.6.1.4.1.4515.1.3.5.2.1.2 | ColumnslmTrapLogName | read-only | current | The object id of the trap. |
| 1.3.6.1.4.1.4515.1.3.5.2.1.3 | ColumnslmTrapLogTimeStamp | read-only | current | The trap time stamp. |
| 1.3.6.1.4.1.4515.1.3.5.2.1.4 | ColumnslmTrapLogParam1 | read-only | current | The first parameter of the trap. |
| 1.3.6.1.4.1.4515.1.3.5.2.1.5 | ColumnslmTrapLogParam2 | read-only | current | The second parameter of the trap. |
| 1.3.6.1.4.1.4515.1.3.5.2.1.6 | ColumnslmTrapLogParam3 | read-only | current | The third parameter of the trap. |
| 1.3.6.1.4.1.4515.1.3.5.2.1.7 | ColumnslmTrapLogParam4 | read-only | current | The forth parameter of the trap. |
| 1.3.6.1.4.1.4515.1.3.5.2.1.8 | ColumnslmTrapLogParam5 | read-only | current | The fifth parameter of the trap. |
| 1.3.6.1.4.1.4515.1.3.5.2.1.9 | ColumnslmTrapLogParam6 | read-only | current | The sixth parameter of the trap. |
| 1.3.6.1.4.1.4515.1.3.5.4 | NotificationslmTrapSoftwareStatusChange | current | A slmTrapSoftwareStatusChange trap is sent when the value of the slmSwRevStatus of one of the directories changes. | |
| 1.3.6.1.4.1.4515.1.3.5.5 | NotificationslmTrapSysNameChange | current | A slmTrapSysNameChange trap is sent when the value of the slmSysName is changed. | |
| 1.3.6.1.4.1.4515.1.3.5.6 | NotificationslmTrapSysLocationChange | current | A slmTrapSysLocationChange trap is sent when the value of the slmSysLocation is changed. | |
| 1.3.6.1.4.1.4515.1.3.5.7 | TableslmSyslogDestTable | not-accessible | current | A list of syslog destination entries. |
| 1.3.6.1.4.1.4515.1.3.5.7.1 | RowslmSyslogDestEntry | not-accessible | current | This entry includes a destination IP addresses to which to send log messages. |
| 1.3.6.1.4.1.4515.1.3.5.7.1.1 | ColumnslmSyslogDestAddress | read-create | current | A copy of slmSyslogDestTable represented as an integer. Needed due to VxWorks failure to handle an ip address as a table index. |
| 1.3.6.1.4.1.4515.1.3.5.7.1.2 | ColumnslmSyslogDestRowStatus | read-create | current | This object is used to create and delete rows in the slmSyslogDestTable. |
| 1.3.6.1.4.1.4515.1.3.5.7.1.3 | ColumnslmSyslogLevel | read-create | current | The level of log messages which this manager expects to receive. |
| 1.3.6.1.4.1.4515.1.3.5.7.1.4 | ColumnslmSyslogPort | read-create | current | The destination port for to send the log message. The default value is 514. |
| 1.3.6.1.4.1.4515.1.3.5.7.1.5 | ColumnslmSyslogDestIpAddress | read-create | current | The address to send log messages on behalf of this entry. |
| 1.3.6.1.4.1.4515.1.3.8 | NodeslmLogFile | |||
| 1.3.6.1.4.1.4515.1.3.9 | NodeslmConfigFile | |||
| 1.3.6.1.4.1.4515.1.3.12 | NodeslmChPass | |||
| 1.3.6.1.4.1.4515.1.3.12.1 | TableslmChPassTable | not-accessible | current | The table is used for changing the user passowrd. |
| 1.3.6.1.4.1.4515.1.3.12.1.1 | RowslmChPassEntry | not-accessible | current | The entry is used to set the slmChPassNewPass. Note that the table contains no data, and when using GetNext it apears to be empty. To change the password, the … |
| 1.3.6.1.4.1.4515.1.3.12.1.1.1 | ColumnslmChPassLogin | not-accessible | current | The user login. |
| 1.3.6.1.4.1.4515.1.3.12.1.1.2 | ColumnslmChPassOldPass | not-accessible | current | The user password. |
| 1.3.6.1.4.1.4515.1.3.12.1.1.3 | ColumnslmChPassNewPass | read-write | current | The user password. |
| 1.3.6.1.4.1.4515.1.3.17 | NodeslmLicense | |||
| 1.3.6.1.4.1.4515.1.3.17.1 | TableslmLicenseTable | not-accessible | current | A list of License entries. |
| 1.3.6.1.4.1.4515.1.3.17.1.1 | RowslmLicenseEntry | not-accessible | current | An entry in the table correspond to installed license. |
| 1.3.6.1.4.1.4515.1.3.17.1.1.1 | ColumnslmLicenseIndex | read-only | current | The license index. |
| 1.3.6.1.4.1.4515.1.3.17.1.1.2 | ColumnslmLicenseExpiration | read-only | current | The number of seconds to expiration. Value -1 for permanent. |
| 1.3.6.1.4.1.4515.1.3.17.1.1.3 | ColumnslmLicenseId | read-only | current | The license text |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AdminAccess | INTEGER { none(0), read(1), readwrite(2), provisioning(3), admin(4), trap(5) } | current | The administration access level. |
| SoftwareRevision | DisplayString (SIZE (1..20)) | current | The Software Revision Name. |
| UserCommunity | DisplayString (SIZE (1..20)) | current | The User Community Type. |
| UserLogin | DisplayString (SIZE (1..20)) | current | The User Login Type. |
| UserPassword | DisplayString (SIZE (1..20)) | current | The User Password Type. |