SL-OTN-MIB
42 objects
This MIB module describes the OTN
Imported Objects
| IF-MIB | InterfaceIndex |
| SL-NE-MIB | slService |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4515.1.1.15 | IdentityslOTN | This MIB module describes the OTN | ||
| 1.3.6.1.4.1.4515.1.1.15.1 | NodeslOTNConfig | |||
| 1.3.6.1.4.1.4515.1.1.15.1.1 | TableslOTNConfigTable | not-accessible | current | The OTN Configuration table. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1 | RowslOTNConfigEntry | not-accessible | current | An entry in the OTN Configuration table. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.1 | ColumnslOTNConfigLineIndex | read-only | current | The ifIndex of the XFP. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.2 | ColumnslOTNConfigOperationMode | read-write | current | The OTN operation mode configuration async(1) - OTN G.709 Async mapping with FEC sync(2) - OTN G.709 Sync mapping with FEC bypass(3) - OTN Bypass (Transparent … |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.3 | ColumnslOTNConfigFECEnabled | read-write | current | FEC configuration 0 - disable 1 - G.709 FEC 2 - disable 3 - I.4 4 - I.7 5 - HG-FEC |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.4 | ColumnslOTNConfigStuffingEnabled | read-write | current | Byte stuffing configuration true(1) - Enable OTN Byte Stuffing (255/237) false(2) - Disable OTN Byte Stuffing (255/238) |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.5 | ColumnslOTNConfigOTUkTIMDetEnabled | read-write | current | TIM Detection Enabled. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.6 | ColumnslOTNConfigOTUkDAPIToTransmit | read-write | current | The Destination Access Point Identifier to transmit. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.7 | ColumnslOTNConfigOTUkSAPIToTransmit | read-write | current | The Source Access Point Identifier to transmit. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.8 | ColumnslOTNConfigOTUkDAPIToExpect | read-write | current | The Destination Access Point Identifier to expect. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.9 | ColumnslOTNConfigOTUkSAPIToExpect | read-write | current | The Source Access Point Identifier to expect. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.10 | ColumnslOTNConfigOTUkDAPIReceived | read-only | current | The received Destination Access Point Identifier. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.11 | ColumnslOTNConfigOTUkSAPIReceived | read-only | current | The received Source Access Point Identifier. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.12 | ColumnslOTNConfigODUkTIMDetEnabled | read-write | current | TIM Detection Enabled. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.13 | ColumnslOTNConfigODUkDAPIToTransmit | read-write | current | The Destination Access Point Identifier to transmit. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.14 | ColumnslOTNConfigODUkSAPIToTransmit | read-write | current | The Source Access Point Identifier to transmit. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.15 | ColumnslOTNConfigODUkDAPIToExpect | read-write | current | The Destination Access Point Identifier to expect. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.16 | ColumnslOTNConfigODUkSAPIToExpect | read-write | current | The Source Access Point Identifier to expect. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.17 | ColumnslOTNConfigODUkDAPIReceived | read-only | current | The received Destination Access Point Identifier. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.18 | ColumnslOTNConfigODUkSAPIReceived | read-only | current | The received Source Access Point Identifier. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.19 | ColumnslOTNConfigOTUkTIMKillEnabled | read-write | current | TIM Mismatch kill traffic Enabled. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.20 | ColumnslOTNConfigODUkTIMKillEnabled | read-write | current | TIM Mismatch kill traffic Enabled. |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.21 | ColumnslOTNConfigInbandGCC | read-write | current | GCC selection: 0 - GCC0 1 - GCC1 |
| 1.3.6.1.4.1.4515.1.1.15.1.1.1.22 | ColumnslOTNMsiDisable | read-write | current | Enable/Disable the MSI signaling. Default is False |
| 1.3.6.1.4.1.4515.1.1.15.2 | NodeslOTNPm | |||
| 1.3.6.1.4.1.4515.1.1.15.2.1 | TableslOTNCurrentPmTable | not-accessible | current | The OTN current table contains various OTN PM statistics. |
| 1.3.6.1.4.1.4515.1.1.15.2.1.1 | RowslOTNCurrentPmEntry | not-accessible | current | An entry in the OTN Current table. |
| 1.3.6.1.4.1.4515.1.1.15.2.1.1.1 | ColumnslOTNCurrentPmIndex | read-only | current | The ifIndex of the XFP. |
| 1.3.6.1.4.1.4515.1.1.15.2.1.1.2 | ColumnslOTNCurrentPmFecCe | read-only | current | FEC Corrected Errors. Increment for each FEC corrected error. |
| 1.3.6.1.4.1.4515.1.1.15.2.1.1.3 | ColumnslOTNCurrentPmFecCerMant | read-only | current | FEC Corrected Error Ratio - The mantissa value. |
| 1.3.6.1.4.1.4515.1.1.15.2.1.1.4 | ColumnslOTNCurrentPmFecCerExp | read-only | current | FEC Corrected Error Ratio - The exponent value. |
| 1.3.6.1.4.1.4515.1.1.15.2.1.1.5 | ColumnslOTNCurrentPmFecCerValid | read-only | current | FEC Corrected Error Ratio - Validity flag. |
| 1.3.6.1.4.1.4515.1.1.15.2.1.1.6 | ColumnslOTNCurrentPmFecCerMantFE | read-only | current | Far End FEC Corrected Error Ratio - The mantissa value. |
| 1.3.6.1.4.1.4515.1.1.15.2.1.1.7 | ColumnslOTNCurrentPmFecCerExpFE | read-only | current | Far End FEC Corrected Error Ratio - The exponent value. |
| 1.3.6.1.4.1.4515.1.1.15.2.1.1.8 | ColumnslOTNCurrentPmFecCerValidFE | read-only | current | Far End FEC Corrected Error Ratio - Validity flag. |
| 1.3.6.1.4.1.4515.1.1.15.2.1.1.9 | ColumnslOTNCurrentPmReset | read-write | current | Writing this object reset the FEC PM. |
| 1.3.6.1.4.1.4515.1.1.15.3 | NodeslOTNTraps |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| OTNOperationMode | INTEGER { async(1), sync(2), bypass(3) } | current | Indicates the operation mode of the OTN interface Detection function. |
| OTNTraceMessage | OCTET STRING (SIZE(16)) | current | The Access Point Identifier, SAPI or DAPI. |
| OTNTrafficRate | INTEGER { sonetSdh10G(1), gbe10GLan(2), fc10G(3) , otu2(4), otu2eLan(5), otu2eLanStuff(6), otu2eFc(7), otu2FcStuff(8) } | current | The Host or Line bit rates. |