SL-ROADM-MIB
36 objects
This MIB module describes the ROADM
Imported Objects
| IF-MIB | InterfaceIndex |
| SL-NE-MIB | slService |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4515.1.1.16 | IdentityslROADM | This MIB module describes the ROADM | ||
| 1.3.6.1.4.1.4515.1.1.16.1 | NodeslROADMConfig | |||
| 1.3.6.1.4.1.4515.1.1.16.1.1 | TableslWSSConfigTable | not-accessible | current | The ROADM Configuration table. |
| 1.3.6.1.4.1.4515.1.1.16.1.1.1 | RowslWSSConfigEntry | not-accessible | current | An entry in the WSS Configuration table. |
| 1.3.6.1.4.1.4515.1.1.16.1.1.1.1 | ColumnslWSSConfigLineIndex | read-only | current | Only one entry in the table. Thus this is a dummy ifIndex that equals to 1. |
| 1.3.6.1.4.1.4515.1.1.16.1.1.1.2 | ColumnslWSSConfigOperStatus | read-only | current | The WSS operational status. 0 - DOWN, 1 - UP. |
| 1.3.6.1.4.1.4515.1.1.16.1.1.1.3 | ColumnslWSSConfigSwitchTemp | read-only | current | The switch temperature in 0.1 celsius |
| 1.3.6.1.4.1.4515.1.1.16.1.1.1.4 | ColumnslWSSConfigBoardTemp | read-only | current | The board temperature in 0.1 celsius |
| 1.3.6.1.4.1.4515.1.1.16.1.1.1.5 | ColumnslWSSConfigCaseTemp | read-only | current | The case temperature in 0.1 celsius |
| 1.3.6.1.4.1.4515.1.1.16.1.1.1.6 | ColumnslWSSConfigUptime | read-only | current | The case temperature in 0.1 celsius |
| 1.3.6.1.4.1.4515.1.1.16.1.1.1.7 | ColumnslWSSConfigComFirstWl | read-write | current | The channel number |
| 1.3.6.1.4.1.4515.1.1.16.1.1.1.8 | ColumnslWSSConfigComChCount | read-write | current | The overall count of channels in the Waveplan. The channels are ordered in increasing frequency (decreasing wavelength). |
| 1.3.6.1.4.1.4515.1.1.16.1.1.1.9 | ColumnslWSSConfigPowerLevel | read-only | current | The received Destination Access Point Identifier. |
| 1.3.6.1.4.1.4515.1.1.16.1.1.1.10 | ColumnslWSSConfigAttenLevel | read-only | current | The received Source Access Point Identifier. |
| 1.3.6.1.4.1.4515.1.1.16.1.1.1.11 | ColumnslWSSConfigEqualizationThreshLevel | read-write | current | The equalization threshold level. In manual mode if the TX power is below this threshold an alarm is declared against this channel. Legal values are -8dBm to -… |
| 1.3.6.1.4.1.4515.1.1.16.1.1.1.12 | ColumnslWSSConfigEqualizationMethod | read-write | current | The equalization method: 1 - manual equlization to predefined value (default mode). 2 - automatic equlization |
| 1.3.6.1.4.1.4515.1.1.16.1.1.1.13 | ColumnslWSSConfigSpacing | read-write | current | The spacing supported by the ROADM. |
| 1.3.6.1.4.1.4515.1.1.16.1.2 | TableslROCHConfigTable | not-accessible | current | The ROADM Channel Configuration table. |
| 1.3.6.1.4.1.4515.1.1.16.1.2.1 | RowslROCHConfigEntry | not-accessible | current | An entry in the ROADM Configuration table. |
| 1.3.6.1.4.1.4515.1.1.16.1.2.1.1 | ColumnslROCHConfigLineIndex | read-only | current | The ifIndex of the channel. Channels 1-100 for the 100 GHz spacing cannels (e.g. 17 for CH17). Channels 101-200 for the 50 GHz spacing channels (e.g. 117 for C… |
| 1.3.6.1.4.1.4515.1.1.16.1.2.1.2 | ColumnslROCHConfigProvisioning | read-write | current | The channel provisioning |
| 1.3.6.1.4.1.4515.1.1.16.1.2.1.3 | ColumnslROCHConfigInPowerLevel | read-only | current | The Power Level of the channel equal to Out Power Level + Attenuation |
| 1.3.6.1.4.1.4515.1.1.16.1.2.1.4 | ColumnslROCHConfigOutPowerLevel | read-only | current | The Output Power Level of the channel |
| 1.3.6.1.4.1.4515.1.1.16.1.2.1.5 | ColumnslROCHConfigChannelDetect | read-only | current | Channel detect indication. 0 - not detected, 1 - channel is detected |
| 1.3.6.1.4.1.4515.1.1.16.1.2.1.6 | ColumnslROCHConfigChPowerFailHighThresh | read-write | current | The threshold for channel High Power Failure. Setting this value applies to all channels. |
| 1.3.6.1.4.1.4515.1.1.16.1.2.1.7 | ColumnslROCHConfigChPowerFailLowThresh | read-write | current | The threshold for channel Low Power Failure. Setting this value applies to all channels. |
| 1.3.6.1.4.1.4515.1.1.16.1.2.1.8 | ColumnslROCHConfigChPowerDegHighThresh | read-write | current | The threshold for channel High Power Degrade. Setting this value applies to all channels. |
| 1.3.6.1.4.1.4515.1.1.16.1.2.1.9 | ColumnslROCHConfigChPowerDegLowThresh | read-write | current | The threshold for channel Low Power Degrade. Setting this value applies to all channels. |
| 1.3.6.1.4.1.4515.1.1.16.1.2.1.10 | ColumnslROCHConfigChPowerHystHighThresh | read-write | current | The threshold for channel High Power Hysteresis. Setting this value applies to all channels. |
| 1.3.6.1.4.1.4515.1.1.16.1.2.1.11 | ColumnslROCHConfigChPowerHystLowThresh | read-write | current | The threshold for channel Low Power Hysteresis. Setting this value applies to all channels. |
| 1.3.6.1.4.1.4515.1.1.16.1.2.1.12 | ColumnslROCHConfigChAlias | read-write | current | The alias for the channel. The dfault is the empty string |
| 1.3.6.1.4.1.4515.1.1.16.1.2.1.13 | ColumnslROCHConfigChAliasSmm | read-write | current | The alias for the channel as given by the SMM. The dfault is the empty string |
| 1.3.6.1.4.1.4515.1.1.16.1.2.1.14 | ColumnslROCHConfigProvisioningNew | read-write | current | The channel provisioning. A bitmask with each bit for the corresponding port. Bit n ON means that the channel is added/dropped from/to port number n+1. |
| 1.3.6.1.4.1.4515.1.1.16.2 | NodeslROADMPm | |||
| 1.3.6.1.4.1.4515.1.1.16.3 | NodeslROADMTraps |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ROCHProvisioningType | INTEGER { none(1), exp(2), add(3) } | current | The channel provisioning type. |