SL-SONET-MIB
71 objects
This MIB module describes the SiteLight SONET Service. The mib contains the extensions required for the rfc2558.
Imported Objects
| IF-MIB | ifIndex InterfaceIndex |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount PerfTotalCount |
| SL-NE-MIB | sitelight |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4515.1.6 | IdentityslSonetMib | This MIB module describes the SiteLight SONET Service. The mib contains the extensions required for the rfc2558. | ||
| 1.3.6.1.4.1.4515.1.6.1 | NodeslSonetConfig | |||
| 1.3.6.1.4.1.4515.1.6.1.1 | TableslSonetConfigTable | not-accessible | current | The SONET/SDH configuration table. This table has objects for configuring sonet lines. |
| 1.3.6.1.4.1.4515.1.6.1.1.1 | RowslSonetConfigEntry | not-accessible | current | An entry in the table. There is an entry for each SONET line in the table. Entries are automatically created for an ifType value of sonet(39). 'ifAdminStatus' … |
| 1.3.6.1.4.1.4515.1.6.1.1.1.1 | ColumnslSonetConfigFrameScramble | read-write | current | This object is used to disable or enable the Scrambling option in SONET line. Please refer to GR-253-CORE for frame scrambling. |
| 1.3.6.1.4.1.4515.1.6.1.1.1.2 | ColumnslSonetConfigType | read-write | current | This object represents the configured line type for Trunks: sonetSts48c(5) - 1 x Sts48 (2.5GbTrunk) sonetSts192c(12) - 1 x Sts192 (10Gb Trunk) sonetStsOther(13… |
| 1.3.6.1.4.1.4515.1.6.1.1.1.3 | ColumnslSonetConfigDccSelection | read-write | current | This object selects the DCC type. |
| 1.3.6.1.4.1.4515.1.6.1.1.1.4 | ColumnslSonetResetAllCounters | read-write | current | Setting this variable to 1 will cause all of the counters (performance regsters) on this SONET interface to be initialized to zero (0). |
| 1.3.6.1.4.1.4515.1.6.1.1.1.5 | ColumnslSonetPortThresholdTrapEnable | read-write | current | This variable indicates whether threshold traps should be generated for this SONET interface. |
| 1.3.6.1.4.1.4515.1.6.1.1.1.6 | ColumnslSonetConfigSdThreshold | read-write | current | This object contains the Bit Error Rate threshold for Signal Degrade detection on the working line. Once this threshold is exceeded, an APS switch will occur. … |
| 1.3.6.1.4.1.4515.1.6.1.1.1.7 | ColumnslSonetConfigSfThreshold | read-write | current | This object contains the Bit Error Rate threshold for Signal Fault detection on the working line. Once this threshold is exceeded, an APS switch will occur. Th… |
| 1.3.6.1.4.1.4515.1.6.1.1.1.9 | ColumnslSonetCompression | read-write | current | This object applies only for trunk ports. It specifies if the packets should be compressed. 0 - Means no POS compression, 1 - Means POS compression with CRC-32… |
| 1.3.6.1.4.1.4515.1.6.1.1.1.10 | ColumnslSonetOverheadTunneling | read-write | current | The section and line overhead tunneling configuration: none(0) - no tunneling support lineDcc(1) - line DCC tunneling k1k2(2) - line DCC + protection k byte fu… |
| 1.3.6.1.4.1.4515.1.6.1.1.1.11 | ColumnslSonetLopBitmask | read-only | current | The LOP status. Each bit of the bits represent the status of the LOP alarm in corresponding STS. For a path with more than a single STS, only the value of the … |
| 1.3.6.1.4.1.4515.1.6.1.1.1.12 | ColumnslSonetTdmTrunk | read-write | current | This object is applicable only to the OC-n ports. TRUE - means that the OC-n port is used as a TDM Trunk. FLASE - means normal OC-n port. |
| 1.3.6.1.4.1.4515.1.6.1.1.1.13 | ColumnslSonetFsApply | read-write | current | Writing to this object activate the slSonetFsTable setting. This allow the NMS to do many changes to the slSonetFsTable and then APPLY them at once. This preve… |
| 1.3.6.1.4.1.4515.1.6.1.1.1.14 | ColumnslSonetTxLte | read-write | current | The SS bits to transmit (bits 5,6 in H1,H1*). |
| 1.3.6.1.4.1.4515.1.6.1.1.1.15 | ColumnslSonetReceivedLte | read-only | current | The detected LTE type, according to the received SS bits (bits 5,6 in H1,H1*). |
| 1.3.6.1.4.1.4515.1.6.1.1.1.16 | ColumnslSonetResetPmThreshold | read-write | current | Setting this variable to 1 will reset the PM threshold parameters to the factory defaults. |
| 1.3.6.1.4.1.4515.1.6.1.1.1.17 | ColumnslSonetResetAlsParams | read-write | current | Setting this variable to 1 will reset the ALS parameters to the factory defaults. |
| 1.3.6.1.4.1.4515.1.6.1.1.1.18 | ColumnslSonetTransceiverType | read-only | current | The tranceiver type. |
| 1.3.6.1.4.1.4515.1.6.1.1.1.19 | ColumnslSonetTransceiverMedia | read-only | current | The tranceiver media. |
| 1.3.6.1.4.1.4515.1.6.2 | NodeslSonetOh | |||
| 1.3.6.1.4.1.4515.1.6.2.1 | NodeslSonetOhTrace | |||
| 1.3.6.1.4.1.4515.1.6.2.1.1 | TableslSonetTraceTable | not-accessible | current | The SONET/SDH Trace table. This table contains objects for tracing the sonet section and path. |
| 1.3.6.1.4.1.4515.1.6.2.1.1.1 | RowslSonetTraceEntry | not-accessible | current | An entry in the trace table. Entries exist for active sonet interfaces. The objects in this table are used to verify continued connection between the two ends … |
| 1.3.6.1.4.1.4515.1.6.2.1.1.1.1 | ColumnslSonetTraceMode | read-write | current | Determine the Trace Message Mode. |
| 1.3.6.1.4.1.4515.1.6.2.1.1.1.2 | ColumnslSonetTraceToTransmit | read-write | current | Sonet Trace To Transmit. This is string that is transmitted to perform Sonet trace diagnostics. The trace string is repetitively transmited so that a trace rec… |
| 1.3.6.1.4.1.4515.1.6.2.1.1.1.3 | ColumnslSonetTraceToExpect | read-write | current | Sonet Trace Massage To Expect. The receiving terminal verifies if the incoming string matches this string. The value of 'slSonetTraceFailure' indicates whether… |
| 1.3.6.1.4.1.4515.1.6.2.1.1.1.4 | ColumnslSonetTraceFailure | read-only | current | The value of this object is set to 'true' when Sonet Section received trace does not match the 'slSonetTraceToExpect'. |
| 1.3.6.1.4.1.4515.1.6.2.1.1.1.5 | ColumnslSonetTraceReceived | read-only | current | This object is used to view the Sonet Trace Message that is received by the receiving terminal. The Agent is responsible to pad the end of the string with <CR>… |
| 1.3.6.1.4.1.4515.1.6.2.2 | NodeslSonetOhSl | |||
| 1.3.6.1.4.1.4515.1.6.2.2.1 | TableslSonetSlTable | not-accessible | current | The SONET/SDH Signal Label table. This table contains signal label for the sonet path. |
| 1.3.6.1.4.1.4515.1.6.2.2.1.1 | RowslSonetSlEntry | not-accessible | current | An entry in the SONET/SDH Signal Label table. The entries exist for active sonet lines. The objects in this table are used to verify continued connection betwe… |
| 1.3.6.1.4.1.4515.1.6.2.2.1.1.2 | ColumnslSonetSlToTransmit | read-write | current | Sonet Signal Label To Transmit. |
| 1.3.6.1.4.1.4515.1.6.2.2.1.1.3 | ColumnslSonetSlToExpect | read-write | current | Sonet Signal Label To Expect. |
| 1.3.6.1.4.1.4515.1.6.2.2.1.1.4 | ColumnslSonetSlFailure | read-only | current | The value of this object is set to 'true' when Sonet received signal label does not match the 'slSonetSlToExpect'. |
| 1.3.6.1.4.1.4515.1.6.2.2.1.1.5 | ColumnslSonetSlReceived | read-only | current | This object is used to view the Sonet Signal Label that is received by the receiving terminal. |
| 1.3.6.1.4.1.4515.1.6.2.3 | NodeslSonetOhTraps | |||
| 1.3.6.1.4.1.4515.1.6.6 | NodeslSonetPos | |||
| 1.3.6.1.4.1.4515.1.6.6.1 | TableslSonetPosTable | not-accessible | current | The POS PM Table. |
| 1.3.6.1.4.1.4515.1.6.6.1.1 | RowslSonetPosEntry | not-accessible | current | The entries exist for active Trunk sonet lines ifType = pos(171). The objects in this table are used to moitor the POS layer. |
| 1.3.6.1.4.1.4515.1.6.6.1.1.1 | ColumnslSonetPosFcs | read-only | current | The Number of FCS Errors. |
| 1.3.6.1.4.1.4515.1.6.6.1.1.2 | ColumnslSonetPosAbort | read-only | current | The Number of Aborted packets. |
| 1.3.6.1.4.1.4515.1.6.6.1.1.3 | ColumnslSonetPosMinViolation | read-only | current | The Number of Minimum length violation packets. |
| 1.3.6.1.4.1.4515.1.6.6.1.1.4 | ColumnslSonetPosMaxViolation | read-only | current | The Number of Maximum length violation packets. |
| 1.3.6.1.4.1.4515.1.6.6.1.1.5 | ColumnslSonetPosRxfifoDiscard | read-only | current | The Number of packets discarded due to RXFIFO error. |
| 1.3.6.1.4.1.4515.1.6.6.1.1.6 | ColumnslSonetPosPacketReceived | read-only | current | The Number of packets received. |
| 1.3.6.1.4.1.4515.1.6.6.1.1.7 | ColumnslSonetPosPacketReceivedOk | read-only | current | The Number of error free packets. |
| 1.3.6.1.4.1.4515.1.6.7 | NodeslSonetAls | |||
| 1.3.6.1.4.1.4515.1.6.7.1 | TableslSonetAlsTable | not-accessible | current | The ALS configuration Table. |
| 1.3.6.1.4.1.4515.1.6.7.1.1 | RowslSonetAlsEntry | not-accessible | current | The entries exist for active sonet lines ifType = sonet(39). The objects in this table are used to configure the ALS algorithm. |
| 1.3.6.1.4.1.4515.1.6.7.1.1.1 | ColumnslSonetAlsMode | read-write | current | Enable/Disable the ALS algorithm. Note that the if the Laser Admin Status is 'down' the ALS mechanism is not operational. |
| 1.3.6.1.4.1.4515.1.6.7.1.1.2 | ColumnslSonetLosDeclareTime | read-write | current | Time to declare optical LOS present or clear: 550 +- 50 msec. |
| 1.3.6.1.4.1.4515.1.6.7.1.1.3 | ColumnslSonetTestPulseTime | read-write | current | Manual restart for test Pulse time (in manual restart) - 90+-10 sec. |
| 1.3.6.1.4.1.4515.1.6.7.1.1.4 | ColumnslSonetManualPulseTime | read-write | current | Manual restart Pulse time (in manual mode) - 2+-0.25 sec. |
| 1.3.6.1.4.1.4515.1.6.7.1.1.5 | ColumnslSonetAutomaticPulseTime | read-write | current | Automatic restart Pulse time (in automatic mode) - 2+-0.25 sec. |
| 1.3.6.1.4.1.4515.1.6.7.1.1.6 | ColumnslSonetAutomaticDelayTime | read-write | current | In Automatic mode. The delay between two laser re-activations. |
| 1.3.6.1.4.1.4515.1.6.7.1.1.7 | ColumnslSonetLaserTestActivate | read-write | current | Activate the laser for test operation. |
| 1.3.6.1.4.1.4515.1.6.7.1.1.8 | ColumnslSonetLaserManualActivate | read-write | current | Activate the laser manual operation. |
| 1.3.6.1.4.1.4515.1.6.8 | NodeslSonetFs | |||
| 1.3.6.1.4.1.4515.1.6.8.1 | TableslSonetFsTable | not-accessible | current | The frame structure configuration Table. In order to define a new path the NMS should create and configure an entry in this table. The table is also used to mo… |
| 1.3.6.1.4.1.4515.1.6.8.1.1 | RowslSonetFsEntry | not-accessible | current | The entries exist for sonet paths ifType = sonet(39). The objects in this table are used to configure the frame structure. Each OC-N line interface shall maint… |
| 1.3.6.1.4.1.4515.1.6.8.1.1.1 | ColumnslSonetFsIfIndex | read-only | current | The interface index. |
| 1.3.6.1.4.1.4515.1.6.8.1.1.2 | ColumnslSonetFsSts | read-only | current | The number of the first STS in the path. Note that no all values are legal because there is no support for combus with mixed structure |
| 1.3.6.1.4.1.4515.1.6.8.1.1.3 | ColumnslSonetFsWidth | read-write | current | The number STS's in the path. The width is only valid for the first STS in the path. The other STSs of the path will have width=0. |
| 1.3.6.1.4.1.4515.1.6.8.1.1.4 | ColumnslSonetFsFullPathTermination | read-write | current | FALSE - means partial path termination (only LOP alarm). TRUE - include full support for path Alarms and PM counters. |
| 1.3.6.1.4.1.4515.1.6.8.1.1.5 | ColumnslSonetFsGranularity | read-write | current | This value is set by the NMS according to the configured frame structure. Each VC-3 that is mapped to AUG-1 via VC-4 should have the value vc4(1). Otherwise th… |
| 1.3.6.1.4.1.4515.1.6.11 | NodeslSonetTraps | |||
| 1.3.6.1.4.1.4515.1.6.11.1 | NotificationslSonetFsTableChange | current | A slSonetFsTableChange trap is sent when the content of the slSonetFsTable is changed. This trap may be used by the NMS to identify the removal of path interfa… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SignalLabel | INTEGER { sigUnequipped(0), sigEquipped(1), sigPathFloatVt(2), sigPathLoackedVt(3), sigPathAsynchDs3(4), sigPathSyntran(5), sigPathAsyncDs4na(18), sigPathAtm(19), sigPathDqdb(20), sigPathFddi(21), sigPathHdlc(22), sigPathGfp(27) } | current | STS path signal label indicate the construction of the STS SPE. The following hex values of the C2 byte has been defined. |