SLA-MONITOR-MIB
114 objects
An Avaya management module containing data definitions related to the SLA Monitor Agent.
Imported Objects
| DIFFSERV-DSCP-TC | Dscp |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| RFC1213-MIB | DisplayString |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType |
| SYNOPTICS-ROOT-MIB | policy |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.45.4.8 | IdentityslaMonitorMib | An Avaya management module containing data definitions related to the SLA Monitor Agent. | ||
| 1.3.6.1.4.1.45.4.8.0 | NodeslaMonitorMibNotifications | |||
| 1.3.6.1.4.1.45.4.8.0.1 | NotificationslaMonitorAgentExceptionDetected | current | Indicates that an exception event that impacts the local SLA Monitor agent has been detected. | |
| 1.3.6.1.4.1.45.4.8.1 | NodeslaMonitorMibClasses | |||
| 1.3.6.1.4.1.45.4.8.1.1 | NodeslaMonitorAgtClasses | |||
| 1.3.6.1.4.1.45.4.8.1.1.1 | ScalarslaMonitorAgentStatus | read-write | current | The value of this attribute indicates whether the SLA Monitor agent is enabled or not. An agent that is enabled will respond to SLA Monitor server discovery pa… |
| 1.3.6.1.4.1.45.4.8.1.1.2 | ScalarslaMonitorAgentAddressType | read-only | current | The type of IP address used by the agent. This object is limited to IPv4 and IPv6 addresses. |
| 1.3.6.1.4.1.45.4.8.1.1.3 | ScalarslaMonitorAgentAddress | read-only | current | The IP address currently used by the SLA Monitor agent. |
| 1.3.6.1.4.1.45.4.8.1.1.4 | ScalarslaMonitorAgentPort | read-only | current | The UDP port currently used by the SLA Monitor agent for agent-server communication. |
| 1.3.6.1.4.1.45.4.8.1.1.5 | ScalarslaMonitorAgentRegisteredWithServer | read-only | current | The value of this attribute indicates whether the SLA Monitor agent is registered with an SLA Monitor server or not. |
| 1.3.6.1.4.1.45.4.8.1.1.6 | ScalarslaMonitorAgentRegisteredServerAddrType | read-only | current | The type of IP address used by the server. This object is limited to IPv4 and IPv6 addresses. |
| 1.3.6.1.4.1.45.4.8.1.1.7 | ScalarslaMonitorAgentRegisteredServerAddr | read-only | current | The IP address of the SLA Monitor server with which the agent is currently registered. |
| 1.3.6.1.4.1.45.4.8.1.1.8 | ScalarslaMonitorAgentRegisteredServerPort | read-only | current | The TCP port utilized by the SLA Monitor server with which the agent is currently registered. |
| 1.3.6.1.4.1.45.4.8.1.1.9 | ScalarslaMonitorAgentRegistrationTime | read-only | current | Specifies the maximum amount of time, in seconds, until the current registration period expires. |
| 1.3.6.1.4.1.45.4.8.1.1.10 | ScalarslaMonitorAgentCliAvailable | read-write | current | The value of this attribute indicates whether the SLA Monitor agent CLI is available or not. |
| 1.3.6.1.4.1.45.4.8.1.1.11 | ScalarslaMonitorAgentCliTimeout | read-write | current | Specifies the maximum amount of time, in seconds, until the CLI session is automatically terminated. The value of this attribute is pertinent only if CLI timeo… |
| 1.3.6.1.4.1.45.4.8.1.1.12 | ScalarslaMonitorAgentCliTimeoutMode | read-write | current | The value of this attribute indicates whether the SLA Monitor agent automatic CLI session timeout is enabled or not. When this attribute is set to 'enable(1)',… |
| 1.3.6.1.4.1.45.4.8.1.1.13 | ScalarslaMonitorAgentSupportedApps | read-only | current | An enumeration of the SLA Monitor agent capabilities. |
| 1.3.6.1.4.1.45.4.8.1.1.14 | ScalarslaMonitorAgentConfiguredAgentAddrType | read-write | current | The type of IP address used by the agent. This object is limited to IPv4 and IPv6 addresses. |
| 1.3.6.1.4.1.45.4.8.1.1.15 | ScalarslaMonitorAgentConfiguredAgentAddr | read-write | current | The IP address of the SLA Monitor agent. If the value of this attribute is 0.0.0.0, the SLA Monitor agent will utilize an active device IP address by default. |
| 1.3.6.1.4.1.45.4.8.1.1.16 | ScalarslaMonitorAgentConfiguredAgentPort | read-write | current | The UDP port utilized by the SLA Monitor agent for agent-server communication. If the value of this attribute is zero, the SLA Monitor agent will utilize a def… |
| 1.3.6.1.4.1.45.4.8.1.1.17 | ScalarslaMonitorAgentConfiguredServerAddrType | read-write | current | The type of IP address used by the server. This object is limited to IPv4 and IPv6 addresses. |
| 1.3.6.1.4.1.45.4.8.1.1.18 | ScalarslaMonitorAgentConfiguredServerAddr | read-write | current | The IP address of the SLA Monitor server with which the agent is allowed to register. If the value of this attribute is not 0.0.0.0, the SLA Monitor agent may … |
| 1.3.6.1.4.1.45.4.8.1.1.19 | ScalarslaMonitorAgentConfiguredServerPort | read-write | current | The TCP port utilized by the SLA Monitor server with which the agent is allowed to register. If the value of this attribute is non-zero, the SLA Monitor agent … |
| 1.3.6.1.4.1.45.4.8.1.1.20 | ScalarslaMonitorAgentConfiguredAltServerAddrType | read-write | current | The type of IP address used by the server. This object is limited to IPv4 and IPv6 addresses. |
| 1.3.6.1.4.1.45.4.8.1.1.21 | ScalarslaMonitorAgentConfiguredAltServerAddr | read-write | current | The IP address of the alternate SLA Monitor server with which the agent is allowed to register. If the value of this attribute is not 0.0.0.0, the SLA Monitor … |
| 1.3.6.1.4.1.45.4.8.1.1.22 | ScalarslaMonitorAgentConfiguredAltServerPort | read-write | current | The TCP port utilized by the alternate SLA Monitor server with which the agent is allowed to register. If the value of this attribute is non-zero, the SLA Moni… |
| 1.3.6.1.4.1.45.4.8.1.1.23 | ScalarslaMonitorAgentToAgentPort | read-only | current | The base UDP port currently used by the SLA Monitor agent for agent-agent communication. The base UDP port is used to derive multiple agent communication ports… |
| 1.3.6.1.4.1.45.4.8.1.1.24 | ScalarslaMonitorAgentConfiguredAgentToAgentPort | read-write | current | The UDP port utilized by the SLA Monitor agent for agent-agent communication. If the value of this attribute is zero, the SLA Monitor agent will utilize a defa… |
| 1.3.6.1.4.1.45.4.8.1.1.25 | ScalarslaMonitorAgentEncryptionSupport | read-only | current | Specifies if encrypted agent-server communication is supported by the agent. |
| 1.3.6.1.4.1.45.4.8.1.1.26 | ScalarslaMonitorAgentConfiguredAgentVrfName | read-write | current | The name of the virtual Router which SLA Monitor Agent IP address (slaMonitorAgentConfiguredAgentAddr) is associated with. This is only supported on VSP9K for … |
| 1.3.6.1.4.1.45.4.8.1.1.27 | ScalarslaMonitorAgentSlaParameter | read-write | current | String directly passed to the SLA Agent as parameter |
| 1.3.6.1.4.1.45.4.8.1.1.28 | ScalarslaMonitorAgentCertFileInstallAction | read-write | current | Operation object to install and deinstall the certificate file to a platform specific location. 'noactio' -is default setting and always is returned when this … |
| 1.3.6.1.4.1.45.4.8.1.1.29 | ScalarslaMonitorAgentCertFile | read-write | current | the certification file name for installation. It is only valid or used when object slaMonitorAgentCertFileInstallAction is set to install. Otherwise, it will b… |
| 1.3.6.1.4.1.45.4.8.1.1.30 | ScalarslaMonitorAgentServerBypass | read-write | current | The value of this attribute determines whether the SLA Monitor agent can perform certain operations without being registered with a server. When this attribute… |
| 1.3.6.1.4.1.45.4.8.1.1.31 | ScalarslaMonitorAgentRefuseServerTests | read-write | current | The value of this attribute determines whether the SLA Monitor agent will refuse test requests from the server. When this attribute is set to 'allow(1)', an ag… |
| 1.3.6.1.4.1.45.4.8.1.2 | NodeslaMonitorAgtTestClasses | |||
| 1.3.6.1.4.1.45.4.8.1.2.1 | TableslaMonitorNtrCtrlTable | not-accessible | current | Defines the SLAMon agent NTR test control table supporting the ability to initiate NTR tests remotely. The results of NTR test operations are stored in the sla… |
| 1.3.6.1.4.1.45.4.8.1.2.1.1 | RowslaMonitorNtrCtrlEntry | not-accessible | current | Defines an entry in the slaMonitorNtrCtrlTable. The first index element, slaMonitorNtrCtrlOwnerId, is of type SnmpAdminString, allowing for a management applic… |
| 1.3.6.1.4.1.45.4.8.1.2.1.1.1 | ColumnslaMonitorNtrCtrlOwnerId | not-accessible | current | The owner of an NTR test. |
| 1.3.6.1.4.1.45.4.8.1.2.1.1.2 | ColumnslaMonitorNtrCtrlTestName | not-accessible | current | The name of an NTR test. This value is locally unique, within the scope of an slaMonitorNtrCtrlOwnerId. |
| 1.3.6.1.4.1.45.4.8.1.2.1.1.3 | ColumnslaMonitorNtrCtrlTargetAddressType | read-create | current | Specifies the target address type. |
| 1.3.6.1.4.1.45.4.8.1.2.1.1.4 | ColumnslaMonitorNtrCtrlTargetAddress | read-create | current | Specifies the target address used for the NTR test. The address type can be determined by examining the value of the corresponding slaMonitorNtrCtrlTargetAddre… |
| 1.3.6.1.4.1.45.4.8.1.2.1.1.5 | ColumnslaMonitorNtrCtrlDscp | read-create | current | Specifies the DSCP value for use in packets that are generated by the NTR test. |
| 1.3.6.1.4.1.45.4.8.1.2.1.1.6 | ColumnslaMonitorNtrCtrlAttempts | read-create | current | Specifies the number of attempts are generated by the NTR test. |
| 1.3.6.1.4.1.45.4.8.1.2.1.1.7 | ColumnslaMonitorNtrCtrlPeriod | read-create | current | Specifies the interval between packets, in microseconds, generated by the NTR test. |
| 1.3.6.1.4.1.45.4.8.1.2.1.1.8 | ColumnslaMonitorNtrCtrlAdminStatus | read-create | current | Used to initiate an NTR test: enabled(1) - initiate the test as defined by this slaMonitorNtrCtrlEntry. disabled(2) - deactivate the test defined by this slaMo… |
| 1.3.6.1.4.1.45.4.8.1.2.1.1.9 | ColumnslaMonitorNtrCtrlLabel | read-create | current | A label used to reference the NTR control entry in a textual manner. |
| 1.3.6.1.4.1.45.4.8.1.2.1.1.10 | ColumnslaMonitorNtrCtrlStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.45.4.8.1.2.1.1.11 | ColumnslaMonitorNtrCtrlRowStatus | read-create | current | This object allows entries to be created and deleted in the slaMonitorNtrCtrlTable. Deletion of an entry in this table results in the deletion of all correspon… |
| 1.3.6.1.4.1.45.4.8.1.2.2 | TableslaMonitorNtrResultsTable | not-accessible | current | Defines the SLAMon agent NTR results table that is used to track the status of NTR tests initiated through the the slaMonitorNtrCtrlTable. An entry is added to… |
| 1.3.6.1.4.1.45.4.8.1.2.2.1 | RowslaMonitorNtrResultsEntry | not-accessible | current | Defines an entry in the slaMonitorNtrResultsTable. The slaMonitorNtrResultsTable has the same indexing as the slaMonitorNtrCtrlTable so that a slaMonitorNtrRes… |
| 1.3.6.1.4.1.45.4.8.1.2.2.1.1 | ColumnslaMonitorNtrResultsOperStatus | read-only | current | Reflects the operational state of an slaMonitorNtrCtrlEntry: inProgress(1) - test is active. aborted(2) - test has been stopped. Refer to object slaMonitorNtrR… |
| 1.3.6.1.4.1.45.4.8.1.2.2.1.2 | ColumnslaMonitorNtrResultsSrcAddressType | read-only | current | Specifies the address type of the source IP address used for this test. |
| 1.3.6.1.4.1.45.4.8.1.2.2.1.3 | ColumnslaMonitorNtrResultsSrcAddress | read-only | current | Specifies the source IP address used for this test. |
| 1.3.6.1.4.1.45.4.8.1.2.2.1.4 | ColumnslaMonitorNtrResultsDstAddressType | read-only | current | Specifies the address type of the destination IP address used for this test. |
| 1.3.6.1.4.1.45.4.8.1.2.2.1.5 | ColumnslaMonitorNtrResultsDstAddress | read-only | current | Specifies the destination IP address used for this test. |
| 1.3.6.1.4.1.45.4.8.1.2.2.1.6 | ColumnslaMonitorNtrResultsSrcPort | read-only | current | Specifies the Layer 4 source port used for this test. |
| 1.3.6.1.4.1.45.4.8.1.2.2.1.7 | ColumnslaMonitorNtrResultsDstPort | read-only | current | Specifies the Layer 4 destination port used for this test. |
| 1.3.6.1.4.1.45.4.8.1.2.2.1.8 | ColumnslaMonitorNtrResultsDscp | read-only | current | Specifies the DSCP value contained in NTR test packets generated by the agent for this test. |
| 1.3.6.1.4.1.45.4.8.1.2.2.1.9 | ColumnslaMonitorNtrResultsTTL | read-only | current | The maximum time-to-live (TTL) value used during the execution of this test. |
| 1.3.6.1.4.1.45.4.8.1.2.2.1.10 | ColumnslaMonitorNtrResultsCompletionData | read-only | current | Provides details related to test completion. Multiple bits may be set to convey test status. |
| 1.3.6.1.4.1.45.4.8.1.2.2.1.11 | ColumnslaMonitorNtrResultsCompletionSummary | read-only | current | A user-readable string that is used to convey test results for completed tests in an easy-to-understand format. |
| 1.3.6.1.4.1.45.4.8.1.2.2.1.12 | ColumnslaMonitorNtrResultsAbortData | read-only | current | Provides details for tests that were aborted. Multiple bits may be set to convey test status. |
| 1.3.6.1.4.1.45.4.8.1.2.2.1.13 | ColumnslaMonitorNtrResultsHopCount | read-only | current | The total number of hops for which information has been acquired during the execution of this test. |
| 1.3.6.1.4.1.45.4.8.1.2.3 | TableslaMonitorNtrHopsTable | not-accessible | current | Defines the SLAMon agent NTR test hop table for keeping track of the results of NTR tests on a per-hop basis. |
| 1.3.6.1.4.1.45.4.8.1.2.3.1 | RowslaMonitorNtrHopsEntry | not-accessible | current | Defines an entry in the slaMonitorNtrHopsTable. The first two index elements identify the slaMonitorNtrCtrlEntry with which this slaMonitorNtrHopsEntry is asso… |
| 1.3.6.1.4.1.45.4.8.1.2.3.1.1 | ColumnslaMonitorNtrHopsHopIndex | not-accessible | current | Specifies the hop index for an NTR test hop. Values for this object with respect to the same slaMonitorNtrCtrlOwnerId and slaMonitorNtrCtrlTestName MUST start … |
| 1.3.6.1.4.1.45.4.8.1.2.3.1.2 | ColumnslaMonitorNtrHopsTgtAddressType | read-only | current | This object indicates the type of address stored in the corresponding slaMonitorNtrHopsTgtAddress object. |
| 1.3.6.1.4.1.45.4.8.1.2.3.1.3 | ColumnslaMonitorNtrHopsTgtAddress | read-only | current | This object reports the IP address associated with the NTR test hop. |
| 1.3.6.1.4.1.45.4.8.1.2.3.1.4 | ColumnslaMonitorNtrHopsRtt | read-only | current | The NTR test round-trip-time (RTT), in microseconds, computed for this hop. |
| 1.3.6.1.4.1.45.4.8.1.2.3.1.5 | ColumnslaMonitorNtrHopsIngressDscp | read-only | current | The DSCP value in the NTR test packet received by the target host (slaMonitorNtrHopsTgtAddress) for this hop. |
| 1.3.6.1.4.1.45.4.8.1.2.3.1.6 | ColumnslaMonitorNtrHopsEgressDscp | read-only | current | The DSCP value in the NTR test response packet received by the SLAMon agent for this hop. |
| 1.3.6.1.4.1.45.4.8.1.2.4 | TableslaMonitorRtpCtrlTable | not-accessible | current | Defines the SLAMon agent RTP test control table supporting the ability to initiate RTP tests remotely. The results of RTP test operations are stored in the sla… |
| 1.3.6.1.4.1.45.4.8.1.2.4.1 | RowslaMonitorRtpCtrlEntry | not-accessible | current | Defines an entry in the slaMonitorRtpCtrlTable. The first index element, slaMonitorRtpCtrlOwnerId, is of type SnmpAdminString, allowing for a management applic… |
| 1.3.6.1.4.1.45.4.8.1.2.4.1.1 | ColumnslaMonitorRtpCtrlOwnerId | not-accessible | current | The owner of an RTP test. |
| 1.3.6.1.4.1.45.4.8.1.2.4.1.2 | ColumnslaMonitorRtpCtrlTestName | not-accessible | current | The name of an RTP test. This is locally unique, within the scope of an slaMonitorRtpCtrlOwnerId. |
| 1.3.6.1.4.1.45.4.8.1.2.4.1.3 | ColumnslaMonitorRtpCtrlTargetAddressType | read-create | current | Specifies the target address type. |
| 1.3.6.1.4.1.45.4.8.1.2.4.1.4 | ColumnslaMonitorRtpCtrlTargetAddress | read-create | current | Specifies the target address used for the RTP test. The address type can be determined by examining the value of the corresponding slaMonitorRtpCtrlTargetAddre… |
| 1.3.6.1.4.1.45.4.8.1.2.4.1.5 | ColumnslaMonitorRtpCtrlDscp | read-create | current | Specifies the DSCP value for use in packets that are generated by the RTP test. |
| 1.3.6.1.4.1.45.4.8.1.2.4.1.6 | ColumnslaMonitorRtpCtrlTestPackets | read-create | current | Specifies the number of test packets that are generated by the RTP test. Test packets are used for jitter determination. |
| 1.3.6.1.4.1.45.4.8.1.2.4.1.7 | ColumnslaMonitorRtpCtrlSyncPackets | read-create | current | Specifies the number of synchronization packets that are generated by the RTP test. Sync packets are used for network delay determination. |
| 1.3.6.1.4.1.45.4.8.1.2.4.1.8 | ColumnslaMonitorRtpCtrlPeriod | read-create | current | Specifies the interval between packets (in microseconds) generated by the RTP test. |
| 1.3.6.1.4.1.45.4.8.1.2.4.1.9 | ColumnslaMonitorRtpCtrlAdminStatus | read-create | current | Used to initiate an RTP test: enabled(1) - initiate the test as defined by this slaMonitorRtpCtrlEntry. disabled(2) - deactivate the test defined by this slaMo… |
| 1.3.6.1.4.1.45.4.8.1.2.4.1.10 | ColumnslaMonitorRtpCtrlLabel | read-create | current | A label used to reference the RTP control entry in a textual manner. |
| 1.3.6.1.4.1.45.4.8.1.2.4.1.11 | ColumnslaMonitorRtpCtrlStorageType | read-create | current | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.45.4.8.1.2.4.1.12 | ColumnslaMonitorRtpCtrlRowStatus | read-create | current | This object allows entries to be created and deleted in the slaMonitorRtpCtrlTable. Deletion of an entry in this table results in the deletion of all correspon… |
| 1.3.6.1.4.1.45.4.8.1.2.5 | TableslaMonitorRtpResultsTable | not-accessible | current | Defines the SLAMon agent RTP results table that is used to track the status of RTP tests initiated through the the slaMonitorRtpCtrlTable. An entry is added to… |
| 1.3.6.1.4.1.45.4.8.1.2.5.1 | RowslaMonitorRtpResultsEntry | not-accessible | current | Defines an entry in the slaMonitorRtpResultsTable. The slaMonitorRtpResultsTable has the same indexing as the slaMonitorRtpCtrlTable so that a slaMonitorRtpRes… |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.1 | ColumnslaMonitorRtpResultsOperStatus | read-only | current | Reflects the operational state of an slaMonitorRtpCtrlEntry: inProgress(1) - test is active. aborted(2) - test has been stopped. Refer to object slaMonitorRtpR… |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.2 | ColumnslaMonitorRtpResultsSrcAddressType | read-only | current | Specifies the address type of the source IP address used for this test. |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.3 | ColumnslaMonitorRtpResultsSrcAddress | read-only | current | Specifies the source IP address used for this test. |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.4 | ColumnslaMonitorRtpResultsDstAddressType | read-only | current | Specifies the address type of the destination IP address used for this test. |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.5 | ColumnslaMonitorRtpResultsDstAddress | read-only | current | Specifies the destination IP address used for this test. |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.6 | ColumnslaMonitorRtpResultsSrcPort | read-only | current | Specifies the Layer 4 source port used for this test. |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.7 | ColumnslaMonitorRtpResultsDstPort | read-only | current | Specifies the Layer 4 destination port used for this test. |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.8 | ColumnslaMonitorRtpResultsDscp | read-only | current | Specifies the DSCP value contained in RTP test packets generated by the agent for this test. |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.9 | ColumnslaMonitorRtpResultsAverageDelay | read-only | current | The average network delay (RTT) experienced during this test sequence, in microseconds. |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.10 | ColumnslaMonitorRtpResultsMedianDelay | read-only | current | The median network delay (RTT) experienced during this test sequence, in microseconds. |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.11 | ColumnslaMonitorRtpResultsPacketLoss | read-only | current | A count of packets lost during this test sequence. |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.12 | ColumnslaMonitorRtpResultsOutOfOrderArrivals | read-only | current | The number of out-of-order arrivals detected during this test sequence. |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.13 | ColumnslaMonitorRtpResultsJitterQuartile0 | read-only | current | The quartile 0 network jitter value, in microseconds, experienced during this test sequence. |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.14 | ColumnslaMonitorRtpResultsJitterQuartile1 | read-only | current | The quartile 1 network jitter value, in microseconds, experienced during this test sequence. |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.15 | ColumnslaMonitorRtpResultsJitterQuartile2 | read-only | current | The quartile 2 network jitter value, in microseconds, experienced during this test sequence. |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.16 | ColumnslaMonitorRtpResultsJitterQuartile3 | read-only | current | The quartile 3 network jitter value, in microseconds, experienced during this test sequence. |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.17 | ColumnslaMonitorRtpResultsJitterQuartile4 | read-only | current | The quartile 4 network jitter value, in microseconds, experienced during this test sequence. |
| 1.3.6.1.4.1.45.4.8.1.2.5.1.18 | ColumnslaMonitorRtpResultsAbortData | read-only | current | Provides details for tests that were aborted. Multiple bits may be set to convey test status. |
| 1.3.6.1.4.1.45.4.8.2 | NodeslaMonitorMibConformance | |||
| 1.3.6.1.4.1.45.4.8.2.1 | NodeslaMonitorMibCompliances | |||
| 1.3.6.1.4.1.45.4.8.2.1.1 | ComplianceslaMonitorMibCompliance | read-only | current | Describes the requirements for conformance to the Avaya Networks SLA Monitor Agent MIB. |
| 1.3.6.1.4.1.45.4.8.2.2 | NodeslaMonitorMibGroups | |||
| 1.3.6.1.4.1.45.4.8.2.2.1 | GroupslaMonitorAgentConfigGroup | current | Objects used for SLA Monitor Agent configuration and monitoring. | |
| 1.3.6.1.4.1.45.4.8.2.2.2 | GroupslaMonitorAgentNtrTestGroup | current | Objects used for SLA Monitor Agent NTR test execution and results reporting. | |
| 1.3.6.1.4.1.45.4.8.2.2.3 | GroupslaMonitorAgentRtpTestGroup | current | Objects used for SLA Monitor Agent RTP test execution and results reporting. |