SLE-ISIS-MIB
357 objects
This MIB contains information about RIP version 2.
Imported Objects
| DASAN-SMI | sleMgmt |
| SLE-TC-MIB | SleControlRequestResultType SleControlStatusType |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6296.101.56 | IdentitysleISIS | This MIB contains information about RIP version 2. | ||
| 1.3.6.1.4.1.6296.101.56.1 | NodesleISISBase | |||
| 1.3.6.1.4.1.6296.101.56.1.1 | NodesleISISBaseInfo | |||
| 1.3.6.1.4.1.6296.101.56.1.1.1 | ScalarsleISISRestartSuppressAdjacency | read-write | current | ISIS restart suppress-adjacency |
| 1.3.6.1.4.1.6296.101.56.1.1.2 | ScalarsleISISRestartHelper | read-write | current | ISIS restart helper |
| 1.3.6.1.4.1.6296.101.56.1.1.3 | ScalarsleISISRestartGracePeriod | read-only | current | ISIS Graceful-restart period. Seconds: <1-65535> Specify the number of seconds in the grace period. |
| 1.3.6.1.4.1.6296.101.56.1.2 | NodesleISISBaseControl | |||
| 1.3.6.1.4.1.6296.101.56.1.2.1 | ScalarsleISISControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.101.56.1.2.2 | ScalarsleISISControlStatus | read-only | current | The request of a user command |
| 1.3.6.1.4.1.6296.101.56.1.2.3 | ScalarsleISISControlTimer | read-write | current | The maximum time for the manager for a long running user command |
| 1.3.6.1.4.1.6296.101.56.1.2.4 | ScalarsleISISControlTimeStamp | read-only | current | The time stamp of the last command(end of command) |
| 1.3.6.1.4.1.6296.101.56.1.2.5 | ScalarsleISISControlReqResult | read-only | current | The result of the last user command |
| 1.3.6.1.4.1.6296.101.56.1.2.6 | ScalarsleISISControlRestartSuppressAdjacency | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.1.2.7 | ScalarsleISISControlRestartHelper | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.1.2.8 | ScalarsleISISControlRestartPeriod | read-write | current | ISIS Graceful-restart period. |
| 1.3.6.1.4.1.6296.101.56.1.2.9 | ScalarsleISISControlClearSystemId | read-write | current | System-ID Neighbor system ID in XXXX. XXXX. XXXX format. |
| 1.3.6.1.4.1.6296.101.56.1.2.10 | ScalarsleISISControlClearIfName | read-write | current | Interface Name of ISIS for clear |
| 1.3.6.1.4.1.6296.101.56.1.2.11 | ScalarsleISISControlClearRouteTag | read-write | current | Routing area tag |
| 1.3.6.1.4.1.6296.101.56.1.2.12 | ScalarsleISISControlClearRouteMode | read-write | current | The route mode to clear. Redistribution: Clear ISIS local redistribution routes. all: Clear all of the ISIS routing table.s |
| 1.3.6.1.4.1.6296.101.56.1.3 | NodesleISISBaseNotification | |||
| 1.3.6.1.4.1.6296.101.56.2 | NodesleISISProc | |||
| 1.3.6.1.4.1.6296.101.56.2.1 | NodesleISISProcInfo | |||
| 1.3.6.1.4.1.6296.101.56.2.1.1 | TablesleISISProcInfoTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1 | RowsleISISProcInfoEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.1 | ColumnsleISISProcInfoInstanceID | read-only | current | Instance ID of ISIS Process |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.2 | ColumnsleISISProcInfoTag | read-only | current | ISIS Process Tag |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.3 | ColumnsleISISProcBfdAllInterface | read-only | current | Enable BFD on all interfaces |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.4 | ColumnsleISISProcCapCspf | read-only | current | Enable Constrained Shortest Path First |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.5 | ColumnsleISISProcDynHostname | read-only | current | Enable dynamic hostname |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.6 | ColumnsleISISProcDynHostnameAreaTag | read-only | current | Use area-tag as hostname |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.7 | ColumnsleISISProcIgnLspErr | read-only | current | Ignore LSPs with bad checksums |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.8 | ColumnsleISISProcRouteHighPriorityTag | read-only | current | Sets the high priority of route |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.9 | ColumnsleISISProcIspfLevel | read-only | current | Enable incremental SPF for ISIS proces |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.10 | ColumnsleISISProcIsTypeLevel | read-only | current | IS Level for ISIS process |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.11 | ColumnsleISISProcLspGenInterval | read-only | current | Minimum interval between regenerating same LSP |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.12 | ColumnsleISISProcLspGenIntervalLevel | read-only | current | IS Level for ISIS process |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.13 | ColumnsleISISProcLspMtu | read-only | current | Set lsp MTU in bytes |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.14 | ColumnsleISISProcLspMtuLevel | read-only | current | IS Level for ISIS process |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.15 | ColumnsleISISProcLspRefreshInterval | read-only | current | Set LSP refresh interval |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.16 | ColumnsleISISProcMaxAreaAddressNum | read-only | current | Configure isis maximum area address |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.17 | ColumnsleISISProcMaxLspLifetime | read-only | current | Set maximum LSP lifetime |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.18 | ColumnsleISISProcMetricStyle | read-only | current | Use old-style (ISO 10589) or new-style packet formats |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.19 | ColumnsleISISProcMetricStyleLevel | read-only | current | Level of Metric Style |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.20 | ColumnsleISISProcMplsTrafficEngLevel | read-only | current | Traffice Engine level of MPLS routing protocol |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.21 | ColumnsleISISProcMplsTrafficEngRouterID | read-only | current | Traffice Engine Router ID of MPLS routing protoco |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.22 | ColumnsleISISProcPrcIntervalExpMinDelay | read-only | current | Use exponential backoff min delays between PRC calculation |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.23 | ColumnsleISISProcPrcIntervalExpMaxDelay | read-only | current | Use exponential backoff max delays between PRC calculation |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.24 | ColumnsleISISProcProtocolTopolgy | read-only | current | Protocol Topology |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.25 | ColumnsleISISProcRestartTimerVal | read-only | current | Restart timer interval |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.26 | ColumnsleISISProcRestartTimerLevel | read-only | current | Restart timer level |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.27 | ColumnsleISISProcSpfIntervalExpMin | read-only | current | Use exponential backoff min delays between SPF calculations |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.28 | ColumnsleISISProcSpfIntervalExpMax | read-only | current | Use exponential backoff max delays between SPF calculations |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.29 | ColumnsleISISProcSpfIntervalExpLevel | read-only | current | Level of SPF Interval Exp |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.30 | ColumnsleISISProcAuthMode | read-only | current | Authentication mode of ISIS Process |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.31 | ColumnsleISISProcAuthModeLevel | read-only | current | Authentication level of ISIS Process |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.32 | ColumnsleISISProcAuthSendOnly | read-only | current | Authentication send-only |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.33 | ColumnsleISISProcAuthSendOnlyLevel | read-only | current | Level of Authentication send-only |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.34 | ColumnsleISISProcDomPassVal | read-only | current | ISIS Routing domain password |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.35 | ColumnsleISISProcDomPassAuthSnp | read-only | current | SNP Authentication of ISIS Routing domain |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.36 | ColumnsleISISProcAreaPassVal | read-only | current | ISIS Routing Area password |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.37 | ColumnsleISISProcAreaPassAuthSnp | read-only | current | SNP Authentication of ISIS Routing Area |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.38 | ColumnsleISISProcSetOverloadBit | read-only | current | Signal other routers not to use us in SPF |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.39 | ColumnsleISISProcSetOverloadBitOnStartup | read-only | current | Set overload-bit only temporarily after reboot |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.40 | ColumnsleISISProcSetOverloadBitOnStartupInterval | read-only | current | Time in seconds to advertise ourself as overloaded after reboot |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.41 | ColumnsleISISProcSetOverloadBitSuppress | read-only | current | If overload-bit set, suppress the following types of IP prefixes |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.42 | ColumnsleISISProcWaitTimerVal | read-only | current | Set lsp MTU in bytes |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.43 | ColumnsleISISProcWaitTimerLevel | read-only | current | IS Level for ISIS process |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.44 | ColumnsleISISProcAuthenKeyChainL1 | read-only | current | The authentication key-chain with level1 |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.45 | ColumnsleISISProcAuthenKeyChainL2 | read-only | current | The authentication key-chain with level2. |
| 1.3.6.1.4.1.6296.101.56.2.1.1.1.46 | ColumnsleISISProcAuthenKeyChainL1L2 | read-only | current | The authentication key-chain with level1 and level2. |
| 1.3.6.1.4.1.6296.101.56.2.1.2 | NodesleISISProcInfoControl | |||
| 1.3.6.1.4.1.6296.101.56.2.1.2.1 | ScalarsleISISProcInfoControlRequest | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.1.2.2 | ScalarsleISISProcInfoControlStatus | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.1.2.3 | ScalarsleISISProcInfoControlTimer | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.1.2.4 | ScalarsleISISProcInfoControlTimeStamp | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.1.2.5 | ScalarsleISISProcInfoControlReqResult | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.1.2.6 | ScalarsleISISProcInfoControlTag | read-write | current | ISIS Process Tag |
| 1.3.6.1.4.1.6296.101.56.2.1.2.7 | ScalarsleISISProcInfoControlBfdAllInterface | read-write | current | Enable BFD on all interfaces |
| 1.3.6.1.4.1.6296.101.56.2.1.2.8 | ScalarsleISISProcInfoControlCapCspf | read-write | current | Enable Constrained Shortest Path First |
| 1.3.6.1.4.1.6296.101.56.2.1.2.9 | ScalarsleISISProcInfoControlDynHostname | read-write | current | Enable dynamic hostname |
| 1.3.6.1.4.1.6296.101.56.2.1.2.10 | ScalarsleISISProcInfoControlDynHostnameAreaTag | read-write | current | Use area-tag as hostname |
| 1.3.6.1.4.1.6296.101.56.2.1.2.11 | ScalarsleISISProcInfoControlIgnLspErr | read-write | current | Ignore LSPs with bad checksums |
| 1.3.6.1.4.1.6296.101.56.2.1.2.12 | ScalarsleISISProcInfoControlRouteHighPriorityTag | read-write | current | Sets the high priority of route |
| 1.3.6.1.4.1.6296.101.56.2.1.2.13 | ScalarsleISISProcInfoControlIspfLevel | read-write | current | Enable incremental SPF for ISIS proces |
| 1.3.6.1.4.1.6296.101.56.2.1.2.14 | ScalarsleISISProcInfoControlIsTypeLevel | read-write | current | IS Level for ISISprocess |
| 1.3.6.1.4.1.6296.101.56.2.1.2.15 | ScalarsleISISProcInfoControlLspGenInterval | read-write | current | Minimum interval between regenerating same LSP |
| 1.3.6.1.4.1.6296.101.56.2.1.2.16 | ScalarsleISISProcInfoControlLspGenIntervalLevel | read-write | current | IS Level for ISISprocess |
| 1.3.6.1.4.1.6296.101.56.2.1.2.17 | ScalarsleISISProcInfoControlLspMtu | read-write | current | Set lsp MTU in bytes |
| 1.3.6.1.4.1.6296.101.56.2.1.2.18 | ScalarsleISISProcInfoControlLspMtuLevel | read-write | current | IS Level for ISISprocess |
| 1.3.6.1.4.1.6296.101.56.2.1.2.19 | ScalarsleISISProcInfoControlLspRefreshInterval | read-write | current | Set LSP refresh interval |
| 1.3.6.1.4.1.6296.101.56.2.1.2.20 | ScalarsleISISProcInfoControlMaxAreaAddressNum | read-write | current | Configure isis maximum area address |
| 1.3.6.1.4.1.6296.101.56.2.1.2.21 | ScalarsleISISProcInfoControlMaxLspLifetime | read-write | current | Set maximum LSP lifetime |
| 1.3.6.1.4.1.6296.101.56.2.1.2.22 | ScalarsleISISProcInfoControlMetricStyle | read-write | current | Use old-style (ISO 10589) or new-style packet formats |
| 1.3.6.1.4.1.6296.101.56.2.1.2.23 | ScalarsleISISProcInfoControlMetricStyleLevel | read-write | current | Level of Metric Style |
| 1.3.6.1.4.1.6296.101.56.2.1.2.24 | ScalarsleISISProcInfoControlMplsTrafficEngLevel | read-write | current | Traffice Engine level of MPLS routing protocol |
| 1.3.6.1.4.1.6296.101.56.2.1.2.25 | ScalarsleISISProcInfoControlMplsTrafficEngRouterID | read-write | current | Traffice Engine Router ID of MPLS routing protocol |
| 1.3.6.1.4.1.6296.101.56.2.1.2.26 | ScalarsleISISProcInfoControlPrcIntervalExpMinDelay | read-write | current | Use exponential backoff min delays between PRC calculation |
| 1.3.6.1.4.1.6296.101.56.2.1.2.27 | ScalarsleISISProcInfoControlPrcIntervalExpMaxDelay | read-write | current | Use exponential backoff max delays between PRC calculation |
| 1.3.6.1.4.1.6296.101.56.2.1.2.28 | ScalarsleISISProcInfoControlProtocolTopolgy | read-write | current | Protocol Topology |
| 1.3.6.1.4.1.6296.101.56.2.1.2.29 | ScalarsleISISProcInfoControlRestartTimerVal | read-write | current | Protocol Topology |
| 1.3.6.1.4.1.6296.101.56.2.1.2.30 | ScalarsleISISProcInfoControlRestartTimerLevel | read-write | current | Restart timer level |
| 1.3.6.1.4.1.6296.101.56.2.1.2.31 | ScalarsleISISProcInfoControlSpfIntervalExpMin | read-write | current | Use exponential backoff min delays between SPF calculations |
| 1.3.6.1.4.1.6296.101.56.2.1.2.32 | ScalarsleISISProcInfoControlSpfIntervalExpMax | read-write | current | Use exponential backoff max delays between SPF calculations |
| 1.3.6.1.4.1.6296.101.56.2.1.2.33 | ScalarsleISISProcInfoControlSpfIntervalExpLevel | read-write | current | Level of SPF Interval Exp |
| 1.3.6.1.4.1.6296.101.56.2.1.2.34 | ScalarsleISISProcInfoControlAuthMode | read-write | current | Authentication mode of ISIS Process |
| 1.3.6.1.4.1.6296.101.56.2.1.2.35 | ScalarsleISISProcInfoControlAuthModeLevel | read-write | current | Authentication level of ISIS Process |
| 1.3.6.1.4.1.6296.101.56.2.1.2.36 | ScalarsleISISProcInfoControlAuthSendOnly | read-write | current | Authentication send-only |
| 1.3.6.1.4.1.6296.101.56.2.1.2.37 | ScalarsleISISProcInfoControlAuthSendOnlyLevel | read-write | current | Level of Authentication send-only |
| 1.3.6.1.4.1.6296.101.56.2.1.2.38 | ScalarsleISISProcInfoControlDomPassVal | read-write | current | ISIS Routing domain password |
| 1.3.6.1.4.1.6296.101.56.2.1.2.39 | ScalarsleISISProcInfoControlDomPassAuthSnp | read-write | current | SNP Authentication of ISIS Routing domain |
| 1.3.6.1.4.1.6296.101.56.2.1.2.40 | ScalarsleISISProcInfoControlAreaPassVal | read-write | current | ISIS Routing Area password |
| 1.3.6.1.4.1.6296.101.56.2.1.2.41 | ScalarsleISISProcInfoControlAreaPassAuthSnp | read-write | current | SNP Authentication of ISIS Routing domain |
| 1.3.6.1.4.1.6296.101.56.2.1.2.42 | ScalarsleISISProcInfoControlSetOverloadBit | read-write | current | Signal other routers not to use us in SPF |
| 1.3.6.1.4.1.6296.101.56.2.1.2.43 | ScalarsleISISProcInfoControlSetOverloadBitOnStartup | read-write | current | Set overload-bit only temporarily after reboot |
| 1.3.6.1.4.1.6296.101.56.2.1.2.44 | ScalarsleISISProcInfoControlSetOverloadBitOnStartupInterval | read-write | current | Time in seconds to advertise ourself as overloaded after reboot |
| 1.3.6.1.4.1.6296.101.56.2.1.2.45 | ScalarsleISISProcInfoControlSetOverloadBitSuppress | read-write | current | If overload-bit set, suppress the following types of IP prefixes |
| 1.3.6.1.4.1.6296.101.56.2.1.2.46 | ScalarsleISISProcControlWaitTimerVal | read-write | current | Set lsp MTU in bytes |
| 1.3.6.1.4.1.6296.101.56.2.1.2.47 | ScalarsleISISProcControlWaitTimerLevel | read-write | current | Enable incremental SPF for ISIS proces |
| 1.3.6.1.4.1.6296.101.56.2.1.2.48 | ScalarsleISISProcControlAuthenkeyChain | read-write | current | The authentication key-chain word. |
| 1.3.6.1.4.1.6296.101.56.2.1.2.49 | ScalarsleISISProcControlAuthenkeyChainLevel | read-write | current | The authentication key-chain level. |
| 1.3.6.1.4.1.6296.101.56.2.1.3 | NodesleISISProcInfoNotification | |||
| 1.3.6.1.4.1.6296.101.56.2.2 | NodesleISISProcNet | |||
| 1.3.6.1.4.1.6296.101.56.2.2.1 | TablesleISISProcNetTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.2.1.1 | RowsleISISProcNetEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.2.1.1.1 | ColumnsleISISProcNetInstanceID | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.2.1.1.2 | ColumnsleISISProcNetTitle | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.2.2 | NodesleISISProcNetControl | |||
| 1.3.6.1.4.1.6296.101.56.2.2.2.1 | ScalarsleISISProcNetControlRequest | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.2.2.2 | ScalarsleISISProcNetControlStatus | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.2.2.3 | ScalarsleISISProcNetControlTimer | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.2.2.4 | ScalarsleISISProcNetControlTimeStamp | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.2.2.5 | ScalarsleISISProcNetControlReqResult | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.2.2.6 | ScalarsleISISProcNetControlInstanceID | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.2.2.7 | ScalarsleISISProcNetControlTitle | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.2.3 | NodesleISISProcNetNotification | |||
| 1.3.6.1.4.1.6296.101.56.2.3 | NodesleISISProcDistanceV4 | |||
| 1.3.6.1.4.1.6296.101.56.2.3.1 | TablesleISISProcDistanceV4Table | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.3.1.1 | RowsleISISProcDistanceV4Entry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.3.1.1.1 | ColumnsleISISProcDistanceV4InstanceID | read-only | current | ISIS Instance ID |
| 1.3.6.1.4.1.6296.101.56.2.3.1.1.2 | ColumnsleISISProcDistanceV4Dist | read-only | current | ISIS Administrative Distance range |
| 1.3.6.1.4.1.6296.101.56.2.3.1.1.3 | ColumnsleISISProcDistanceV4SytemID | read-only | current | Source ID in XXXX.XXXX.XXXX format. |
| 1.3.6.1.4.1.6296.101.56.2.3.1.1.4 | ColumnsleISISProcDistanceV4AccessList | read-only | current | Access-list name. |
| 1.3.6.1.4.1.6296.101.56.2.3.2 | NodesleISISProcDistanceV4Control | |||
| 1.3.6.1.4.1.6296.101.56.2.3.2.1 | ScalarsleISISProcDistanceV4ControlRequest | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.3.2.2 | ScalarsleISISProcDistanceV4ControlStatus | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.3.2.3 | ScalarsleISISProcDistanceV4ControlTimer | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.3.2.4 | ScalarsleISISProcDistanceV4TimeStamp | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.3.2.5 | ScalarsleISISProcDistanceV4ntrolReqResult | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.2.3.2.6 | ScalarsleISISProcDistanceV4ControlInstanceID | read-only | current | Set the ISIS Instance ID |
| 1.3.6.1.4.1.6296.101.56.2.3.2.7 | ScalarsleISISProcDistanceV4ControlDist | read-only | current | ISIS Administrative Distance range |
| 1.3.6.1.4.1.6296.101.56.2.3.2.8 | ScalarsleISISProcDistanceV4ControlSytemID | read-only | current | Source ID in XXXX.XXXX.XXXX format. |
| 1.3.6.1.4.1.6296.101.56.2.3.2.9 | ScalarsleISISProcDistanceV4ControlAccessList | read-only | current | Access-list name. |
| 1.3.6.1.4.1.6296.101.56.2.3.3 | NodesleISISProcDistanceV4Notification | |||
| 1.3.6.1.4.1.6296.101.56.3 | NodesleISISIf | |||
| 1.3.6.1.4.1.6296.101.56.3.1 | TableslsISISIfTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.3.1.1 | RowslsISISIfEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.3.1.1.1 | ColumnsleISISIfIndex | read-only | current | vlan interface index for isis protocol. |
| 1.3.6.1.4.1.6296.101.56.3.1.1.2 | ColumnsleISISIfMplsLdpIgpSync | read-only | current | Use this command to enable LDP-ISIS synchronization. 0 : diaable 1 : level-1 2 : level-1-2,(default) 3 : level-2 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.3 | ColumnsleISISIfIpRouter | read-only | current | Use this command to enable ISIS IPv4 routing on the interface. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.1.1.4 | ColumnsleISISIfAuthSendLevel1 | read-only | current | Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.1.1.5 | ColumnsleISISIfAuthSendLevel2 | read-only | current | Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.1.1.6 | ColumnsleISISIfAuthModeMd5Levle1 | read-only | current | Use this command to set the MD5 authentication mode. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.1.1.7 | ColumnsleISISIfAuthModeMd5Levle2 | read-only | current | Use this command to set the MD5 authentication mode. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.1.1.8 | ColumnsleISISIfAuthModeTextLevle1 | read-only | current | Use this command to set the MD5 authentication mode. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.1.1.9 | ColumnsleISISIfAuthModeTextLevle2 | read-only | current | Use this command to set the MD5 authentication mode. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.1.1.10 | ColumnsleISISIfAuthKeyChainLevle1 | read-only | current | Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string |
| 1.3.6.1.4.1.6296.101.56.3.1.1.11 | ColumnsleISISIfAuthKeyChainLevle2 | read-only | current | Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string |
| 1.3.6.1.4.1.6296.101.56.3.1.1.12 | ColumnsleISISIfBfd | read-only | current | Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.1.1.13 | ColumnsleISISIfBfdDisable | read-only | current | Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.1.1.14 | ColumnsleISISIfCircuitType | read-only | current | Use this command to set the circuit type for the interface. 1 : level-1 2 : level-1-2,(default) 3 : level-2 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.15 | ColumnsleISISIfCsnpIntervalLevel1 | read-only | current | Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 - 65535 default : 10 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.16 | ColumnsleISISIfCsnpIntervalLevel2 | read-only | current | Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 - 65535 default : 10 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.17 | ColumnsleISISIfHelloPadding | read-only | current | Use this command to configure the padding of the ISIS Hello packet. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.1.1.18 | ColumnsleISISIfHelloIntervalLevel1 | read-only | current | Use this command to set the Hello interval in seconds. range : 1 - 65535 default : 10 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.19 | ColumnsleISISIfHelloIntervalLevel2 | read-only | current | Use this command to set the Hello interval in seconds. range : 1 - 65535 default : 10 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.20 | ColumnsleISISIfHelloIntervalMinimalLevel1 | read-only | current | Use this command to set the Hello interval in seconds. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.1.1.21 | ColumnsleISISIfHelloIntervalMinimalLevel2 | read-only | current | Use this command to set the Hello interval in seconds. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.1.1.22 | ColumnsleISISIfHelloMultiplierLevel1 | read-only | current | Use this command to set multiplier for Hello holding time. range : 2 - 10 default : 3 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.23 | ColumnsleISISIfHelloMultiplierLevel2 | read-only | current | Use this command to set multiplier for Hello holding time. range : 2 - 10 default : 3 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.24 | ColumnsleISISIfLspInterval | read-only | current | Use this command to set the Link State Packet (LSP) transmission interval. range : 1 - 4294967295 default : 33 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.25 | ColumnsleISISIfMeshGroup | read-only | current | Use this command to set Mesh Group ID on the current interface. range : 1 - 4294967295 disable : 0 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.26 | ColumnsleISISIfMetricLevel1 | read-only | current | Use this command to set default metric for the interface. range : 1 - 63 default : 10 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.27 | ColumnsleISISIfMetricLevel2 | read-only | current | Use this command to set default metric for the interface. range : 1 - 63 default : 10 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.28 | ColumnsleISISIfNetwork | read-only | current | Use this command to change a broadcast interface network type to a point-to-point network type. 0 : disable 1 : broadcast 2 : point-to-point |
| 1.3.6.1.4.1.6296.101.56.3.1.1.29 | ColumnsleISISIfPriorityLevel1 | read-only | current | Use this command to set the priority for LAN DIS election. range : 0 - 127 default : 64 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.30 | ColumnsleISISIfPriorityLevel2 | read-only | current | Use this command to set the priority for LAN DIS election. range : 0 - 127 default : 64 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.31 | ColumnsleISISIfRestartHelloIntervalLevel1 | read-only | current | Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 - 65535 default : 3 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.32 | ColumnsleISISIfRestartHelloIntervalLevel2 | read-only | current | Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 - 65535 default : 3 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.33 | ColumnsleISISIfRetransmitInterval | read-only | current | Use this command to set LSP retransmission interval. range : 0 - 65535 default : 5 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.34 | ColumnsleISISIfWideMetricLevel1 | read-only | current | Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10 |
| 1.3.6.1.4.1.6296.101.56.3.1.1.35 | ColumnsleISISIfWideMetricLevel2 | read-write | current | Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10 |
| 1.3.6.1.4.1.6296.101.56.3.2 | NodesleISISIfControl | |||
| 1.3.6.1.4.1.6296.101.56.3.2.1 | ScalarsleISISIfControlRequest | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.3.2.2 | ScalarsleISISIfControlStatus | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.3.2.3 | ScalarsleISISIfControlTimer | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.3.2.4 | ScalarsleISISIfControlTimeStamp | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.3.2.5 | ScalarsleISISIfControlReqResult | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.3.2.6 | ScalarsleISISIfControlIndex | read-write | current | vlan interface index for isis protocol. |
| 1.3.6.1.4.1.6296.101.56.3.2.7 | ScalarsleISISIfControlMplsLdpIgpSync | read-write | current | Use this command to enable LDP-ISIS synchronization. 0 : diaable 1 : level-1 2 : level-1-2,(default) 3 : level-2 |
| 1.3.6.1.4.1.6296.101.56.3.2.8 | ScalarsleISISIfControlIpRouter | read-write | current | Use this command to enable ISIS IPv4 routing on the interface. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.2.9 | ScalarsleISISIfControlAuthSendLevel1 | read-write | current | Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.2.10 | ScalarsleISISIfControlAuthSendLevel2 | read-write | current | Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.2.11 | ScalarsleISISIfControlAuthModeMd5Levle1 | read-write | current | Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.2.12 | ScalarsleISISIfControlAuthModeMd5Levle2 | read-write | current | Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.2.13 | ScalarsleISISIfControlAuthModeTextLevle1 | read-write | current | Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.2.14 | ScalarsleISISIfControlAuthModeTextLevle2 | read-write | current | Use this command to set the send-only option to the interface-related packets. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.2.15 | ScalarsleISISIfControlAuthKeyChainLevle1 | read-write | current | Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string |
| 1.3.6.1.4.1.6296.101.56.3.2.16 | ScalarsleISISIfControlAuthKeyChainLevle2 | read-write | current | Use this command to set the key chain to be used for authentication on the interface-related packets. disable : null string |
| 1.3.6.1.4.1.6296.101.56.3.2.17 | ScalarsleISISIfControlBfd | read-write | current | Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.2.18 | ScalarsleISISIfControlBfdDisable | read-write | current | Use this command to enable/disable the BFD check on interface. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.2.19 | ScalarsleISISIfControlCircuitType | read-write | current | Use this command to set the circuit type for the interface. 1 : level-1 2 : level-1-2,(default) 3 : level-2 |
| 1.3.6.1.4.1.6296.101.56.3.2.20 | ScalarsleISISIfControlCsnpIntervalLevel1 | read-write | current | Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 ? 65535 default : 10 |
| 1.3.6.1.4.1.6296.101.56.3.2.21 | ScalarsleISISIfControlCsnpIntervalLevel2 | read-write | current | Use this command to set CSNP (Complete sequence number PDU) interval in seconds. range : 1 ? 65535 default : 10 |
| 1.3.6.1.4.1.6296.101.56.3.2.22 | ScalarsleISISIfControlHelloPadding | read-write | current | Use this command to configure the padding of the ISIS Hello packet. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.2.23 | ScalarsleISISIfControlHelloIntervalLevel1 | read-write | current | Use this command to set the Hello interval in seconds. range : 1 ? 65535 default : 10 |
| 1.3.6.1.4.1.6296.101.56.3.2.24 | ScalarsleISISIfControlHelloIntervalLevel2 | read-write | current | Use this command to set the Hello interval in seconds. range : 1 ? 65535 default : 10 |
| 1.3.6.1.4.1.6296.101.56.3.2.25 | ScalarsleISISIfControlHelloIntervalMinimalLevel1 | read-write | current | Use this command to set the Hello interval in seconds. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.2.26 | ScalarsleISISIfControlHelloIntervalMinimalLevel2 | read-write | current | Use this command to set the Hello interval in seconds. 1 : enable 0 : disable |
| 1.3.6.1.4.1.6296.101.56.3.2.27 | ScalarsleISISIfControlHelloMultiplierLevel1 | read-write | current | Use this command to set multiplier for Hello holding time. range : 2 ? 10 default : 3 |
| 1.3.6.1.4.1.6296.101.56.3.2.28 | ScalarsleISISIfControlHelloMultiplierLevel2 | read-write | current | Use this command to set multiplier for Hello holding time. range : 2 ? 10 default : 3 |
| 1.3.6.1.4.1.6296.101.56.3.2.29 | ScalarsleISISIfControlLspInterval | read-write | current | Use this command to set the Link State Packet (LSP) transmission interval. range : 1 ? 4294967295 default : 33 |
| 1.3.6.1.4.1.6296.101.56.3.2.30 | ScalarsleISISIfControlMeshGroup | read-write | current | Use this command to set Mesh Group ID on the current interface. range : 1 ? 4294967295 disable : 0 |
| 1.3.6.1.4.1.6296.101.56.3.2.31 | ScalarsleISISIfControlMetricLevel1 | read-write | current | Use this command to set default metric for the interface. range : 1 ? 63 default : 10 |
| 1.3.6.1.4.1.6296.101.56.3.2.32 | ScalarsleISISIfControlMetricLevel2 | read-write | current | Use this command to set default metric for the interface. range : 1 ? 63 default : 10 |
| 1.3.6.1.4.1.6296.101.56.3.2.33 | ScalarsleISISIfControlNetwork | read-write | current | Use this command to change a broadcast interface network type to a point-to-point network type. 0 : disable 1 : broadcast 2 : point-to-point |
| 1.3.6.1.4.1.6296.101.56.3.2.34 | ScalarsleISISIfControlPriorityLevel1 | read-write | current | Use this command to set the priority for LAN DIS election. range : 0 ? 127 default : 64 |
| 1.3.6.1.4.1.6296.101.56.3.2.35 | ScalarsleISISIfControlPriorityLevel2 | read-write | current | Use this command to set the priority for LAN DIS election. range : 0 ? 127 default : 64 |
| 1.3.6.1.4.1.6296.101.56.3.2.36 | ScalarsleISISIfControlRestartHelloIntervalLevel1 | read-write | current | Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 ? 65535 default : 3 |
| 1.3.6.1.4.1.6296.101.56.3.2.37 | ScalarsleISISIfControlRestartHelloIntervalLevel2 | read-write | current | Use this command to configure the T1 timer, interval of ISIS Hello packet with restart TLV. range : 1 ? 65535 default : 3 |
| 1.3.6.1.4.1.6296.101.56.3.2.38 | ScalarsleISISIfControlRetransmitInterval | read-write | current | Use this command to set LSP retransmission interval. range : 0 ? 65535 default : 5 |
| 1.3.6.1.4.1.6296.101.56.3.2.39 | ScalarsleISISIfControlWideMetricLevel1 | read-write | current | Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10 |
| 1.3.6.1.4.1.6296.101.56.3.2.40 | ScalarsleISISIfControlWideMetricLevel2 | read-write | current | Use this command to set wide metric for the interface. range : 1 - 16777214 default : 10 |
| 1.3.6.1.4.1.6296.101.56.3.3 | NodeslsISISNotification | |||
| 1.3.6.1.4.1.6296.101.56.3.4 | TablesleISISIfStatusTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.3.4.1 | RowsleISISIfStatusEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.3.4.1.1 | ColumnsleISISIfStatusIfIndex | read-only | current | vlan interface index for isis protocol. |
| 1.3.6.1.4.1.6296.101.56.3.4.1.2 | ColumnsleIsisIfStatusIfStatus | read-only | current | The interface up/down status |
| 1.3.6.1.4.1.6296.101.56.3.4.1.3 | ColumnsleIsisIfStatusIsisTag | read-only | current | The ISIS tag |
| 1.3.6.1.4.1.6296.101.56.3.4.1.4 | ColumnsleIsisIfStatusNetworkType | read-only | current | The network type |
| 1.3.6.1.4.1.6296.101.56.3.4.1.5 | ColumnsleIsisIfStatusCircuitType | read-only | current | The circuit type |
| 1.3.6.1.4.1.6296.101.56.3.4.1.6 | ColumnsleIsisIfStatusLocalCircuitId | read-only | current | The local circuit id |
| 1.3.6.1.4.1.6296.101.56.3.4.1.7 | ColumnsleIsisIfStatusExtendedLocalCircuitId | read-only | current | The extended local circuit id |
| 1.3.6.1.4.1.6296.101.56.3.4.1.8 | ColumnsleIsisIfStatusLocalSnpa | read-only | current | The local SNPA mac address |
| 1.3.6.1.4.1.6296.101.56.3.4.1.9 | ColumnsleIsisIfStatusLdpSyncHoldTimer | read-only | current | The LDP sync hold timer(sec) |
| 1.3.6.1.4.1.6296.101.56.3.4.1.10 | ColumnsleIsisIfStatusLdpSyncRemainingTime | read-only | current | The LDP sync remaining time(sec) |
| 1.3.6.1.4.1.6296.101.56.3.4.1.11 | ColumnsleIsisIfStatusCircuitL1Metric | read-only | current | The narrow metric of level1 |
| 1.3.6.1.4.1.6296.101.56.3.4.1.12 | ColumnsleIsisIfStatusCircuitL1WideMetric | read-only | current | The wide metric of level1 |
| 1.3.6.1.4.1.6296.101.56.3.4.1.13 | ColumnsleIsisIfStatusCircuitL1Priority | read-only | current | The priority of level1 |
| 1.3.6.1.4.1.6296.101.56.3.4.1.14 | ColumnsleIsisIfStatusCircuitL1CircuitId | read-only | current | The circuit id of level1 |
| 1.3.6.1.4.1.6296.101.56.3.4.1.15 | ColumnsleIsisIfStatusCircuitL1ActiveAdjacencies | read-only | current | The active adjacencies of level1 |
| 1.3.6.1.4.1.6296.101.56.3.4.1.16 | ColumnsleIsisIfStatusCircuitL1LscpMtu | read-only | current | The MTU of level1 |
| 1.3.6.1.4.1.6296.101.56.3.4.1.17 | ColumnsleIsisIfStatusCircuitL2Metric | read-only | current | The narrow metric of level2 |
| 1.3.6.1.4.1.6296.101.56.3.4.1.18 | ColumnsleIsisIfStatusCircuitL2WideMetric | read-only | current | The wide metric of level2 |
| 1.3.6.1.4.1.6296.101.56.3.4.1.19 | ColumnsleIsisIfStatusCircuitL2Priority | read-only | current | The priority of level2 |
| 1.3.6.1.4.1.6296.101.56.3.4.1.20 | ColumnsleIsisIfStatusCircuitL2CircuitId | read-only | current | The circuit id of level2 |
| 1.3.6.1.4.1.6296.101.56.3.4.1.21 | ColumnsleIsisIfStatusCircuitL2ActiveAdjacencies | read-only | current | The active adjacencies of level2 |
| 1.3.6.1.4.1.6296.101.56.3.4.1.22 | ColumnsleIsisIfStatusCircuitL2LscpMtu | read-only | current | The MTU of level2 |
| 1.3.6.1.4.1.6296.101.56.3.4.1.23 | ColumnsleIsisIfStatusL1HelloTimerBroadcast | read-only | current | The Level1 hello timer of broadcast |
| 1.3.6.1.4.1.6296.101.56.3.4.1.24 | ColumnsleIsisIfStatusL2HelloTimerBroadcast | read-only | current | The Level2 hello timer of broadcast |
| 1.3.6.1.4.1.6296.101.56.3.4.1.25 | ColumnsleIsisIfStatusL1HellotimerPoint2Point | read-only | current | The Level1 hello timer of porint to point |
| 1.3.6.1.4.1.6296.101.56.3.4.1.26 | ColumnsleIsisIfStatusL2HellotimerPoint2Point | read-only | current | The Level2 hello timer of porint to point |
| 1.3.6.1.4.1.6296.101.56.4 | NodesleISISInstIf | |||
| 1.3.6.1.4.1.6296.101.56.4.1 | TablesleISISInstIfTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.4.1.1 | RowsleISISInstIfEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.4.1.1.1 | ColumnsleISISInstIfInstanceId | read-only | current | The ISIS instance index |
| 1.3.6.1.4.1.6296.101.56.4.1.1.2 | ColumnsleISISInstIfInterfaceId | read-only | current | The ISIS interface index |
| 1.3.6.1.4.1.6296.101.56.4.1.1.3 | ColumnsleISISPassiveInterface | read-only | current | The passive interface configuration. |
| 1.3.6.1.4.1.6296.101.56.4.2 | NodesleISISInstIfControl | |||
| 1.3.6.1.4.1.6296.101.56.4.2.1 | ScalarsleISISInstIfControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.101.56.4.2.2 | ScalarsleISISInstIfControlStatus | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.4.2.3 | ScalarsleISISInstIfControlTimer | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.4.2.4 | ScalarsleISISInstIfControlTimeStamp | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.4.2.5 | ScalarsleISISInstIfControlReqResult | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.4.2.6 | ScalarsleISISInstIfControlInstanceId | read-write | current | The ISIS instance index |
| 1.3.6.1.4.1.6296.101.56.4.2.7 | ScalarsleISISInstIfControlInterfaceId | read-write | current | The ISIS interface index ( 0 means all interface) |
| 1.3.6.1.4.1.6296.101.56.5 | NodesleISISInstRedistribute | |||
| 1.3.6.1.4.1.6296.101.56.5.1 | NodesleISISInstRedistProtocol | |||
| 1.3.6.1.4.1.6296.101.56.5.1.1 | TablesleISISInstRedistProtocolTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.5.1.1.1 | RowsleISISInstRedistProtocolEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.5.1.1.1.1 | ColumnsleISISInstRedistProtocolInstanceId | read-only | current | The ISIS instance index |
| 1.3.6.1.4.1.6296.101.56.5.1.1.1.2 | ColumnsleISISInstRedistProtocolId | read-only | current | The ISIS instance index |
| 1.3.6.1.4.1.6296.101.56.5.1.1.1.3 | ColumnsleISISInstRedistProtocolMetric | read-only | current | The ISIS interface index |
| 1.3.6.1.4.1.6296.101.56.5.1.1.1.4 | ColumnsleISISInstRedistProtocolMetricType | read-only | current | The passive interface configuration. |
| 1.3.6.1.4.1.6296.101.56.5.1.1.1.5 | ColumnsleISISInstRedistProtocolRouteLevelType | read-only | current | The passive interface configuration. |
| 1.3.6.1.4.1.6296.101.56.5.1.1.1.6 | ColumnsleISISInstRedistProtocolRouteMapName | read-only | current | The passive interface configuration. |
| 1.3.6.1.4.1.6296.101.56.5.1.2 | NodesleISISInstRedistProtocolControl | |||
| 1.3.6.1.4.1.6296.101.56.5.1.2.1 | ScalarsleISISInstRedistProtocolControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.101.56.5.1.2.2 | ScalarsleISISInstRedistProtocolControlStatus | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.5.1.2.3 | ScalarsleISISInstRedistProtocolControlTimer | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.5.1.2.4 | ScalarsleISISInstRedistProtocolControlTimeStamp | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.5.1.2.5 | ScalarsleISISInstRedistProtocolControlReqResult | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.5.1.2.6 | ScalarsleISISInstRedistProtocolControlInstanceId | read-write | current | The ISIS instance index |
| 1.3.6.1.4.1.6296.101.56.5.1.2.7 | ScalarsleISISInstRedistProtocolControlId | read-write | current | The ISIS interface index ( 0 means all interface) |
| 1.3.6.1.4.1.6296.101.56.5.1.2.8 | ScalarsleISISInstRedistProtocolControlMetric | read-write | current | The ISIS interface index ( 0 means all interface) |
| 1.3.6.1.4.1.6296.101.56.5.1.2.9 | ScalarsleISISInstRedistProtocolControlMetricType | read-write | current | The ISIS interface index ( 0 means all interface) |
| 1.3.6.1.4.1.6296.101.56.5.1.2.10 | ScalarsleISISInstRedistProtocolControlRouteLevelType | read-write | current | The ISIS interface index ( 0 means all interface) |
| 1.3.6.1.4.1.6296.101.56.5.1.2.11 | ScalarsleISISInstRedistProtocolControlRouteMapName | read-write | current | The ISIS interface index ( 0 means all interface) |
| 1.3.6.1.4.1.6296.101.56.5.2 | NodesleISISInstRedistIsisProtocol | |||
| 1.3.6.1.4.1.6296.101.56.5.2.1 | TablesleISISInstRedistIsisProtocolTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.5.2.1.1 | RowsleISISInstRedistIsisProtocolEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.5.2.1.1.1 | ColumnsleISISInstRedistIsisProtocolInstanceId | read-only | current | The ISIS instance index |
| 1.3.6.1.4.1.6296.101.56.5.2.1.1.2 | ColumnsleISISInstRedistIsisProtocolInterAreaFromLv1ToLv2 | read-only | current | The ISIS instance index |
| 1.3.6.1.4.1.6296.101.56.5.2.1.1.3 | ColumnsleISISInstRedistIsisProtocolLv1Lv2DistributeList | read-only | current | The ISIS interface index |
| 1.3.6.1.4.1.6296.101.56.5.2.1.1.4 | ColumnsleISISInstRedistIsisProtocolInterAreaFromLv2ToLv1 | read-only | current | The passive interface configuration. |
| 1.3.6.1.4.1.6296.101.56.5.2.1.1.5 | ColumnsleISISInstRedistIsisProtocolLv2Lv1DistributeList | read-only | current | The passive interface configuration. |
| 1.3.6.1.4.1.6296.101.56.5.2.2 | NodesleISISInstRedistIsisProtocolControl | |||
| 1.3.6.1.4.1.6296.101.56.5.2.2.1 | ScalarsleISISInstRedistIsisProtocolControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.101.56.5.2.2.2 | ScalarsleISISInstRedistIsisProtocolControlStatus | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.5.2.2.3 | ScalarsleISISInstRedistIsisProtocolControlTimer | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.5.2.2.4 | ScalarsleISISInstRedistIsisProtocolControlTimeStamp | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.5.2.2.5 | ScalarsleISISInstRedistIsisProtocolControlReqResult | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.5.2.2.6 | ScalarsleISISInstRedistIsisProtocolControlInstanceId | read-write | current | The ISIS instance index |
| 1.3.6.1.4.1.6296.101.56.5.2.2.7 | ScalarsleISISInstRedistIsisProtocolControlLv1Lv2DistributeList | read-write | current | The ISIS interface index ( 0 means all interface) |
| 1.3.6.1.4.1.6296.101.56.5.2.2.8 | ScalarsleISISInstRedistIsisProtocolControlLv2Lv1DistributeList | read-write | current | The ISIS interface index ( 0 means all interface) |
| 1.3.6.1.4.1.6296.101.56.6 | NodesleISISSummanryAddress | |||
| 1.3.6.1.4.1.6296.101.56.6.1 | TablesleISISSummanryAddressTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.6.1.1 | RowsleISISSummanryAddressEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.6.1.1.1 | ColumnsleISISSummanryAddressInstanceId | read-only | current | The ISIS instance index |
| 1.3.6.1.4.1.6296.101.56.6.1.1.2 | ColumnsleISISSummanryAddressIpValue | read-only | current | The ISIS interface index |
| 1.3.6.1.4.1.6296.101.56.6.1.1.3 | ColumnsleISISSummanryAddressIpNetmask | read-only | current | The passive interface configuration. |
| 1.3.6.1.4.1.6296.101.56.6.1.1.4 | ColumnsleISISSummanryAddressLevel | read-only | current | The passive interface configuration. |
| 1.3.6.1.4.1.6296.101.56.6.1.1.5 | ColumnsleISISSummanryAddressMetric | read-only | current | The passive interface configuration. |
| 1.3.6.1.4.1.6296.101.56.6.2 | NodesleISISSummanryAddressControl | |||
| 1.3.6.1.4.1.6296.101.56.6.2.1 | ScalarsleISISSummanryAddressControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.101.56.6.2.2 | ScalarsleISISSummanryAddressControlStatus | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.6.2.3 | ScalarsleISISSummanryAddressControlTimer | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.56.6.2.4 | ScalarsleISISSummanryAddressControlTimeStamp | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.6.2.5 | ScalarsleISISSummanryAddressControlReqResult | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.56.6.2.6 | ScalarsleISISSummanryAddressControlInstanceId | read-write | current | The ISIS instance index |
| 1.3.6.1.4.1.6296.101.56.6.2.7 | ScalarsleISISSummanryAddressControlIpValue | read-write | current | The ISIS interface index ( 0 means all interface) |
| 1.3.6.1.4.1.6296.101.56.6.2.8 | ScalarsleISISSummanryAddressControlIpNetmask | read-write | current | The ISIS interface index ( 0 means all interface) |
| 1.3.6.1.4.1.6296.101.56.6.2.9 | ScalarsleISISSummanryAddressControlLevel | read-write | current | The ISIS interface index ( 0 means all interface) |
| 1.3.6.1.4.1.6296.101.56.6.2.10 | ScalarsleISISSummanryAddressControlMetric | read-write | current | The ISIS interface index ( 0 means all interface) |
| 1.3.6.1.4.1.6296.101.56.7 | NodesleISISDatabase | |||
| 1.3.6.1.4.1.6296.101.56.7.1 | TablesleISISDatabaseTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.7.1.1 | RowsleISISDatabaseEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.7.1.1.1 | ColumnsleISISDatabaseTag | read-only | current | ISIS database tag ID |
| 1.3.6.1.4.1.6296.101.56.7.1.1.2 | ColumnsleISISDatabaseLevel | read-only | current | ISIS database level index |
| 1.3.6.1.4.1.6296.101.56.7.1.1.3 | ColumnsleISISDatabaseLspId | read-only | current | ISIS database lsp ID |
| 1.3.6.1.4.1.6296.101.56.7.1.1.4 | ColumnsleISISDatabaseLspSeqNum | read-only | current | ISIS database lsp sequence number |
| 1.3.6.1.4.1.6296.101.56.7.1.1.5 | ColumnsleISISDatabaseLspChecksum | read-only | current | ISIS database lsp Checksum |
| 1.3.6.1.4.1.6296.101.56.7.1.1.6 | ColumnsleISISDatabaseLspHoldtime | read-only | current | ISIS database lsp Holdtime |
| 1.3.6.1.4.1.6296.101.56.7.1.1.7 | ColumnsleISISDatabaseAtt | read-only | current | ISIS database att |
| 1.3.6.1.4.1.6296.101.56.7.1.1.8 | ColumnsleISISDatabaseP | read-only | current | ISIS database partition |
| 1.3.6.1.4.1.6296.101.56.7.1.1.9 | ColumnsleISISDatabaseOl | read-only | current | ISIS database overload |
| 1.3.6.1.4.1.6296.101.56.8 | NodesleISISDatabaseDetail | |||
| 1.3.6.1.4.1.6296.101.56.8.1 | TablesleISISDatabaseDetailTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.8.1.1 | RowsleISISDatabaseDetailEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.56.8.1.1.1 | ColumnsleISISDatabaseDetailTag | read-only | current | ISIS database tag |
| 1.3.6.1.4.1.6296.101.56.8.1.1.2 | ColumnsleISISDatabaseDetailLevel | read-only | current | ISIS database level |
| 1.3.6.1.4.1.6296.101.56.8.1.1.3 | ColumnsleISISDatabaseDetailLspId | read-only | current | ISIS database lsp id |
| 1.3.6.1.4.1.6296.101.56.8.1.1.4 | ColumnsleISISDatabaseDetailType | read-only | current | ISIS database lsp detail type. |
| 1.3.6.1.4.1.6296.101.56.8.1.1.5 | ColumnsleISISDatabaseDetailIndex | read-only | current | ISIS database detail index. |
| 1.3.6.1.4.1.6296.101.56.8.1.1.6 | ColumnsleISISDatabaseDetailPad | read-only | current | ISIS database lsp detail pad. |
| 1.3.6.1.4.1.6296.101.56.8.1.1.7 | ColumnsleISISDatabaseDetailValue | read-only | current | ISIS database lsp detail vlaue. |
| 1.3.6.1.4.1.6296.101.56.8.1.1.8 | ColumnsleISISDatabaseDetailDescription | read-only | current | ISIS database detail description. |
| 1.3.6.1.4.1.6296.101.56.9 | GroupsleISISGroup | current | Description. |