SLE-MPLS-L3VPN-MIB
75 objects
This MIB contains managed object definitions for the Layer-3 Multiprotocol Label Switching Virtual Private Networks. Copyright (C) The DASAN Networks. This version of this MIB module is part of RFC4382.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6296.101.16 | IdentitysleMpls | current | SLE MPLS. | |
| 1.3.6.1.4.1.6296.101.16.56 | IdentitysleMplsL3vpnMib | This MIB contains managed object definitions for the Layer-3 Multiprotocol Label Switching Virtual Private Networks. Copyright (C) The DASAN Networks. This ver… | ||
| 1.3.6.1.4.1.6296.101.16.56.1 | NodesleMplsL3vpnInfoBase | |||
| 1.3.6.1.4.1.6296.101.16.56.1.1 | ScalarsleMplsL3VpnInfoConfiguredVrfs | read-only | current | The number of VRFs that are configured on this node. |
| 1.3.6.1.4.1.6296.101.16.56.1.2 | ScalarsleMplsL3VpnInfoActiveVrfs | read-only | current | The number of VRFs that are active on this node. That is, those VRFs whose corresponding mplsL3VpnVrfOperStatus object value is equal to operational (1). |
| 1.3.6.1.4.1.6296.101.16.56.1.3 | ScalarsleMplsL3VpnInfoConnectedInterfaces | read-only | current | Total number of interfaces connected to a VRF. |
| 1.3.6.1.4.1.6296.101.16.56.1.4 | ScalarsleMplsL3VpnInfoNotificationEnable | read-only | current | If this object is true, then it enables the generation of all notifications defined in this MIB. This object's value should be preserved across agent reboots. |
| 1.3.6.1.4.1.6296.101.16.56.1.5 | ScalarsleMplsL3VpnInfoVrfConfMaxPossRts | read-only | current | Denotes maximum number of routes that the device will allow all VRFs jointly to hold. If this value is set to 0, this indicates that the device is unable to de… |
| 1.3.6.1.4.1.6296.101.16.56.1.6 | ScalarsleMplsL3VpnInfoVrfConfRteMxThrshTime | read-only | current | Denotes the interval in seconds, at which the route max threshold notification may be reissued after the maximum value has been exceeded (or has been reached i… |
| 1.3.6.1.4.1.6296.101.16.56.1.7 | ScalarsleMplsL3VpnInfoIllLblRcvThrsh | read-only | current | The number of illegally received labels above which the mplsNumVrfSecIllglLblThrshExcd notification is issued. The persistence of this value mimics that of the… |
| 1.3.6.1.4.1.6296.101.16.56.2 | NodesleMplsVrfRd | |||
| 1.3.6.1.4.1.6296.101.16.56.2.1 | TablesleMplsVrfRdInfoTable | not-accessible | current | This table specifies per-interface MPLS L3VPN VRF Table capability and associated information. Entries in this table define VRF routing instances associated wi… |
| 1.3.6.1.4.1.6296.101.16.56.2.1.1 | RowsleMplsVrfRdInfoEntry | not-accessible | current | An entry in this table is created by an LSR for every VRF capable of supporting MPLS L3VPN. The indexing provides an ordering of VRFs per-VPN interface. |
| 1.3.6.1.4.1.6296.101.16.56.2.1.1.1 | ColumnsleMplsVrfRdInfoName | read-only | current | A Unique Identifier mapping for VRF-Name. |
| 1.3.6.1.4.1.6296.101.16.56.2.1.1.2 | ColumnsleMplsVrfRdInfoRD | read-only | current | The route distinguisher for this VRF. |
| 1.3.6.1.4.1.6296.101.16.56.2.1.1.3 | ColumnsleMplsVrfRdInfoImportMap | read-only | current | Pointer to route map entries. |
| 1.3.6.1.4.1.6296.101.16.56.2.1.1.4 | ColumnsleMplsVrfRdInfoCreationTime | read-only | current | The time at which this VRF entry was created. |
| 1.3.6.1.4.1.6296.101.16.56.2.1.1.5 | ColumnsleMplsVrfRdInfoConfMidRteThresh | read-only | current | Denotes mid-level water marker for the number of routes that this VRF may hold. |
| 1.3.6.1.4.1.6296.101.16.56.2.1.1.6 | ColumnsleMplsVrfRdInfoConfHighRteThresh | read-only | current | Denotes high-level water marker for the number of routes that this VRF may hold. |
| 1.3.6.1.4.1.6296.101.16.56.2.1.1.7 | ColumnsleMplsVrfRdInfoConfMaxRoutes | read-only | current | Denotes maximum number of routes that this VRF is configured to hold. This value MUST be less than or equal to sleMplsVrfConfMaxPossRts unless it is set to 0. |
| 1.3.6.1.4.1.6296.101.16.56.2.1.1.8 | ColumnsleMplsVrfRdInfoConfLastChanged | read-only | current | The value of sysUpTime at the time of the last change of this table entry, which includes changes of VRF parameters defined in this table or addition or deleti… |
| 1.3.6.1.4.1.6296.101.16.56.2.2 | NodesleMplsVrfRdControl | |||
| 1.3.6.1.4.1.6296.101.16.56.2.2.1 | ScalarsleMplsVrfRdControlRequest | read-write | current | This object holds the possible read-write columns that can be modified in the Vrf table. For each read-write column of Vrf table, a Set Operation control value… |
| 1.3.6.1.4.1.6296.101.16.56.2.2.2 | ScalarsleMplsVrfRdControlStatus | read-only | current | This object displays the status of the configuration done. |
| 1.3.6.1.4.1.6296.101.16.56.2.2.3 | ScalarsleMplsVrfRdControlTimer | read-write | current | This object is based on the SLE style where a timer is configured for every control table. |
| 1.3.6.1.4.1.6296.101.16.56.2.2.4 | ScalarsleMplsVrfRdControlTimestamp | read-only | current | This object specifies the time at which the configuration is done. |
| 1.3.6.1.4.1.6296.101.16.56.2.2.5 | ScalarsleMplsVrfRdControlReqResult | read-only | current | The standard result of the SET operation is stored here. |
| 1.3.6.1.4.1.6296.101.16.56.2.2.6 | ScalarsleMplsVrfRdControlVrfName | read-write | current | A Unique Identifier mapping for VRF-Name. |
| 1.3.6.1.4.1.6296.101.16.56.2.2.7 | ScalarsleMplsVrfRdControlRD | read-write | current | The route distinguisher for this VRF. |
| 1.3.6.1.4.1.6296.101.16.56.2.2.8 | ScalarsleMplsVrfRdControlImportMap | read-write | current | Pointer to route map entries. |
| 1.3.6.1.4.1.6296.101.16.56.3 | NodesleMplsVrfRt | |||
| 1.3.6.1.4.1.6296.101.16.56.3.1 | TablesleMplsVrfRTInfoTable | not-accessible | current | This table specifies per-VRF route target association. Each entry identifies a connectivity policy supported as part of a VPN. |
| 1.3.6.1.4.1.6296.101.16.56.3.1.1 | RowsleMplsVrfRTInfoEntry | not-accessible | current | An entry in this table is created by an LSR for each route target configured for a VRF supporting a MPLS L3VPN instance. The indexing provides an ordering per-… |
| 1.3.6.1.4.1.6296.101.16.56.3.1.1.1 | ColumnsleMplsVrfRtName | not-accessible | current | A Unique Identifier mapping for VRF-Name |
| 1.3.6.1.4.1.6296.101.16.56.3.1.1.2 | ColumnsleMplsVrfRtCommunityType | not-accessible | current | The route target community type. |
| 1.3.6.1.4.1.6296.101.16.56.3.1.1.3 | ColumnsleMplsVrfRtAsn | not-accessible | current | The route target distribution value of Asn. If the sleMplsVrfRtCommunityType is asn(0), this object contains valid value. |
| 1.3.6.1.4.1.6296.101.16.56.3.1.1.4 | ColumnsleMplsVrfRtIp | not-accessible | current | The route target distribution value of Ip. If the sleMplsVrfRtCommunityType is ip(1), this object contains valid value. |
| 1.3.6.1.4.1.6296.101.16.56.3.1.1.5 | ColumnsleMplsVrfRtNn | not-accessible | current | The route target distribution value of nn. |
| 1.3.6.1.4.1.6296.101.16.56.3.1.1.6 | ColumnsleMplsVrfRtType | read-only | current | The route target distribution type. |
| 1.3.6.1.4.1.6296.101.16.56.3.2 | NodesleMplsVrfRtControl | |||
| 1.3.6.1.4.1.6296.101.16.56.3.2.1 | ScalarsleMplsVrfRtControlRequest | read-write | current | This object holds the possible read-write columns that can be modified in the Vrf table. For each read-write column of Vrf table, a Set Operation control value… |
| 1.3.6.1.4.1.6296.101.16.56.3.2.2 | ScalarsleMplsVrfRtControlStatus | read-only | current | This object displays the status of the configuration done. |
| 1.3.6.1.4.1.6296.101.16.56.3.2.3 | ScalarsleMplsVrfRtControlTimer | read-write | current | This object is based on the SLE style where a timer is configured for every control table. |
| 1.3.6.1.4.1.6296.101.16.56.3.2.4 | ScalarsleMplsVrfRtControlTimestamp | read-only | current | This object specifies the time at which the configuration is done. |
| 1.3.6.1.4.1.6296.101.16.56.3.2.5 | ScalarsleMplsVrfRtControlReqResult | read-only | current | The standard result of the SET operation is stored here. |
| 1.3.6.1.4.1.6296.101.16.56.3.2.6 | ScalarsleMplsRtControlVrfName | read-write | current | A Unique Identifier mapping for VRF-Name |
| 1.3.6.1.4.1.6296.101.16.56.3.2.7 | ScalarsleMplsVrfRtControlType | read-write | current | The route target distribution type. |
| 1.3.6.1.4.1.6296.101.16.56.3.2.8 | ScalarsleMplsVrfRtControlCommunityType | read-write | current | The route target distribution type. |
| 1.3.6.1.4.1.6296.101.16.56.3.2.9 | ScalarsleMplsVrfRtControlAsn | read-write | current | The route target distribution value of Asn . |
| 1.3.6.1.4.1.6296.101.16.56.3.2.10 | ScalarsleMplsVrfRtControlIp | read-write | current | The route target distribution value of Ip. |
| 1.3.6.1.4.1.6296.101.16.56.3.2.11 | ScalarsleMplsVrfRtControlnn | read-write | current | The route target distribution value of nn. |
| 1.3.6.1.4.1.6296.101.16.56.4 | NodesleMplsVrfRoute | |||
| 1.3.6.1.4.1.6296.101.16.56.4.1 | TablesleMplsVrfRouteInfoTable | not-accessible | current | This table specifies per-interface MPLS L3VPN VRF Table routing information. Entries in this table define VRF routing entries associated with the specified MPL… |
| 1.3.6.1.4.1.6296.101.16.56.4.1.1 | RowsleMplsVrfRouteInfoEntry | not-accessible | current | An entry in this table is created by an LSR for every route present configured (either dynamically or statically) within the context of a specific VRF capable … |
| 1.3.6.1.4.1.6296.101.16.56.4.1.1.1 | ColumnsleMplsVrfRouteName | read-only | current | A Unique Identifier mapping for VRF-Name |
| 1.3.6.1.4.1.6296.101.16.56.4.1.1.2 | ColumnsleMplsVrfRouteInetCidrDestType | read-only | current | The type of the sleMplsVrfRouteInetCidrDest address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are… |
| 1.3.6.1.4.1.6296.101.16.56.4.1.1.3 | ColumnsleMplsVrfRouteInetCidrDest | read-only | current | The destination IP address of this route. The type of this address is determined by the value of the sleMplsVrfRouteInetCidrDestType object. The values for the… |
| 1.3.6.1.4.1.6296.101.16.56.4.1.1.4 | ColumnsleMplsVrfRouteInetCidrPfxLen | read-only | current | Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the sleMplsV… |
| 1.3.6.1.4.1.6296.101.16.56.4.1.1.5 | ColumnsleMplsVrfRouteInetCidrPolicy | read-only | current | This object is an opaque object without any defined semantics. Its purpose is to serve as an additional index that may delineate between multiple entries to th… |
| 1.3.6.1.4.1.6296.101.16.56.4.1.1.6 | ColumnsleMplsVrfRouteInetCidrNHopType | read-only | current | The type of the sleMplsVrfRouteInetCidrNextHop address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those … |
| 1.3.6.1.4.1.6296.101.16.56.4.1.1.7 | ColumnsleMplsVrfRouteInetCidrNextHop | read-only | current | On remote routes, the address of the next system en route. For non-remote routes, a zero-length string. The type of this address is determined by the value of … |
| 1.3.6.1.4.1.6296.101.16.56.4.1.1.8 | ColumnsleMplsVrfRouteInetCidrOutIfIndex | read-only | current | The ifIndex value that identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scen… |
| 1.3.6.1.4.1.6296.101.16.56.4.1.1.9 | ColumnsleMplsVrfRouteInetCidrInIfIndex | read-only | current | Incoming interface index. A value of 0 is valid and represents the scenario where no interface is specified. |
| 1.3.6.1.4.1.6296.101.16.56.4.1.1.10 | ColumnsleMplsVrfRouteInetCidrOutLabel | read-only | current | Out-going label of route. 0-15 are reserved label. 1048576 is invalid label. |
| 1.3.6.1.4.1.6296.101.16.56.4.1.1.11 | ColumnsleMplsVrfRouteInetCidrInLabel | read-only | current | In-coming label of route. 0-15 are reserved label. 1048576 is invalid label. |
| 1.3.6.1.4.1.6296.101.16.56.4.1.1.12 | ColumnsleMplsVrfRouteInetCidrType | read-only | current | The type of route. Note that local(1) refers to a route for which the next hop is the final destination; remote(2) refers to a route for which the next hop is … |
| 1.3.6.1.4.1.6296.101.16.56.4.1.1.13 | ColumnsleMplsVrfRouteInetCidrProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.6296.101.16.56.4.1.1.14 | ColumnsleMplsVrfRouteInetCidrAge | read-only | current | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied except throug… |
| 1.3.6.1.4.1.6296.101.16.56.4.1.1.15 | ColumnsleMplsVrfRouteInetCidrNextHopAS | read-only | current | The Autonomous System Number of the next hop. The semantics of this object are determined by the routing protocol specified in the route's sleMplsVrfRouteInetC… |
| 1.3.6.1.4.1.6296.101.16.56.4.1.1.16 | ColumnsleMplsVrfRouteInetCidrMetric | read-only | current | The primary routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's sleMplsVrfRouteInetCidr… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MplsL3VpnName | OCTET STRING (SIZE (0..31)) | current | An identifier that is assigned to each MPLS/BGP VPN and is used to uniquely identify it. This is assigned by the system operator or NMS and SHOULD be unique throughout the MPLS domain. If this is the case, then this ide… |
| MplsL3VpnNhopType | INTEGER { ifindex(1), ifname(2), ip4(3), ip4Ifindex(4), ipv4Ifname(5), ipv6(6), ipv6Ifindex(7), ipv6Ifname(8), mpls(9) } | current | Use to define the configuration type of next hop. |
| MplsL3VpnRouteDistinguisher | OCTET STRING (SIZE (0..256)) | current | Syntax for a route distinguisher and route target as defined in [RFC4364]. |
| MplsL3VpnRtType | INTEGER { import(1), export(2), both(3) } | current | Used to define the type of a route target usage. Route targets can be specified to be imported, exported, or both. For a complete definition of a route target, see [RFC4364]. |
| MplsL3vpnSnmpRouteType | INTEGER { local(1), remote(2), other(3), reject(4) } sleMpls OBJECT-IDENTITY STATUS current DESCRIPTION "SLE MPLS." ::= { sleMgmt 16 } | current | Used to define the type of static configuration route. |