SLE-MPLS-OAM-MIB
24 objects
sleMpls
Imported Objects
| DASAN-SMI | sleMgmt |
| IF-MIB | ifCounterDiscontinuityGroup ifGeneralInformationGroup |
| MPLS-TC-STD-MIB | mplsStdMIB |
| SLE-TC-MIB | SleControlRequestResultType SleControlStatusType |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 zeroDotZero |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6296.101.16 | IdentitysleMpls | current | SLE MPLS. | |
| 1.3.6.1.4.1.6296.101.16.57 | IdentitysleMplsOam | sleMpls | ||
| 1.3.6.1.4.1.6296.101.16.57.1 | NodesleMplsOamPing | |||
| 1.3.6.1.4.1.6296.101.16.57.1.2 | NodesleMplsOamPingControlTable | |||
| 1.3.6.1.4.1.6296.101.16.57.1.2.1 | ScalarsleMplsOamPingControlRequest | read-write | current | the configuration commands, and user can configure functions via setting this entry as proper value. |
| 1.3.6.1.4.1.6296.101.16.57.1.2.2 | ScalarsleMplsOamPingControlStatus | read-only | current | status of user command. User have to check this value as .busy. or .idle. before do setRequest. |
| 1.3.6.1.4.1.6296.101.16.57.1.2.3 | ScalarsleMplsOamPingControlTimer | read-write | current | the wait-time until setRequest end. In case of short-time command, this value is 0 |
| 1.3.6.1.4.1.6296.101.16.57.1.2.4 | ScalarsleMplsOamPingControlTimeStamp | read-only | current | the time stamp of the last command. (don.t care) |
| 1.3.6.1.4.1.6296.101.16.57.1.2.5 | ScalarsleMplsOamPingControlReqResult | read-only | current | Result of the last command. |
| 1.3.6.1.4.1.6296.101.16.57.1.2.6 | ScalarsleMplsOamPingControlPrefixAddress | read-write | current | This object is used to set the Prefix Address. |
| 1.3.6.1.4.1.6296.101.16.57.1.2.7 | ScalarsleMplsOamPingControlPrefixMasklen | read-write | current | This object is used to set the prefix length. |
| 1.3.6.1.4.1.6296.101.16.57.1.2.8 | ScalarsleMplsOamPingControlVcId | read-write | current | This is object is used to set the VcId for l2-circuitPing. |
| 1.3.6.1.4.1.6296.101.16.57.1.2.9 | ScalarsleMplsOamControlVrfName | read-write | current | This object is used to set the Vrf name for L3vpnPing. |
| 1.3.6.1.4.1.6296.101.16.57.1.2.10 | ScalarsleMplsOamPingVplsId | read-write | current | this object is used to set the VplsId . |
| 1.3.6.1.4.1.6296.101.16.57.1.2.11 | ScalarsleMplsOamPingControlTunnelName | read-write | current | This object is used to set the Tunnel name for rsvp ping |
| 1.3.6.1.4.1.6296.101.16.57.1.2.12 | ScalarsleMplsOamPingControlRemoteVrf | read-write | current | this object is used to enable the RemoteVrf for VRF Ping. |
| 1.3.6.1.4.1.6296.101.16.57.1.2.13 | ScalarsleMplsOamPingcontrolDestinationIpAddress | read-write | current | This object is used to set the Destination Ip address. |
| 1.3.6.1.4.1.6296.101.16.57.1.2.14 | ScalarsleMplsOamPingReplyMode | read-write | current | this object is used to set the Reply mode for ping and Trace. reply via udp and replyvia IPpck for Trace. |
| 1.3.6.1.4.1.6296.101.16.57.1.2.15 | ScalarsleMplsOamPingControlForceExplicitNull | read-write | current | this object is used to set the ForceExplicit Null for Ping And Trace. |
| 1.3.6.1.4.1.6296.101.16.57.1.2.16 | ScalarsleMplsOamPingControlSource | read-write | current | this object is used to set the source address . |
| 1.3.6.1.4.1.6296.101.16.57.1.2.17 | ScalarsleMplsOamPingControlInterval | read-write | current | ping interval. |
| 1.3.6.1.4.1.6296.101.16.57.1.2.18 | ScalarsleMplsOamPingControlTimeout | read-write | current | ping Timeout. |
| 1.3.6.1.4.1.6296.101.16.57.1.2.19 | ScalarsleMplsOamPingControlRepeat | read-write | current | ping Repeat. |
| 1.3.6.1.4.1.6296.101.16.57.1.2.20 | ScalarsleMplsOamPingControlTtl | read-write | current | ping and trace TTl |