SLE-MPLS-TP-LPS-MIB
54 objects
This management information module supports the configuration and management of MplsTp TP linear protection groups.
Imported Objects
| DASAN-SMI | sleMgmt |
| SLE-TC-MIB | SleControlRequestResultType SleControlStatusType |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6296.101.16 | IdentitysleMpls | current | SLE MplsTp. | |
| 1.3.6.1.4.1.6296.101.16.18 | IdentitysleMplsTpLps | This management information module supports the configuration and management of MplsTp TP linear protection groups. | ||
| 1.3.6.1.4.1.6296.101.16.18.1 | NodesleMplsTpLpsCfg | |||
| 1.3.6.1.4.1.6296.101.16.18.1.1 | TablesleMplsTpLpsCfgInfoTable | read-only | current | This table lists the sleMplsTp linear protection groups that have been configured on the system. |
| 1.3.6.1.4.1.6296.101.16.18.1.1.1 | RowsleMplsTpLpsCfgInfoEntry | read-only | current | A conceptual row in the sleMplsTpLpsCfgInfoTable. |
| 1.3.6.1.4.1.6296.101.16.18.1.1.1.1 | ColumnsleMplsTpLpsCfgInfoGroupIndex | read-only | current | Index for the conceptual row identifying a protection group. |
| 1.3.6.1.4.1.6296.101.16.18.1.1.1.2 | ColumnsleMplsTpLpsCfgInfoGroupName | read-only | current | Textual name represents the sleMplsTp tp protection group. Each Protection Group is identified by a unique protection group name. |
| 1.3.6.1.4.1.6296.101.16.18.1.1.1.3 | ColumnsleMplsTpLpsCfgInfoMode | read-only | current | The architectural mode of the Protection group. This can either be 1+1, 1:1, 1:n. 1+1 In the 1+1 protection scheme, a fully dedicated protection entity is allo… |
| 1.3.6.1.4.1.6296.101.16.18.1.1.1.4 | ColumnsleMplsTpLpsCfgInfoProtectionScheme | read-only | current | The object represents the operational scheme of protection switching group. The protection scheme may either be unidirectional or bidirectional. bidirectional … |
| 1.3.6.1.4.1.6296.101.16.18.1.1.1.5 | ColumnsleMplsTpLpsCfgInfoRevertive | read-only | current | This object represents the reversion mode of the Linear Protection Switching group. The reversion mode of protection mechanism may be either revertive or non-r… |
| 1.3.6.1.4.1.6296.101.16.18.1.1.1.6 | ColumnsleMplsTpLpsCfgInfoWtr | read-only | current | This object hold the Wait To Restore timer value in seconds. The WTR timer is used to delay reversion of PSC state to Normal state when recovering from a failu… |
| 1.3.6.1.4.1.6296.101.16.18.1.1.1.7 | ColumnsleMplsTpLpsCfgInfoContinualTxInterval | read-only | current | The Continual Tx Time in Seconds. Represents the time interval to send the continual LPS packet to the other end based on the current state. |
| 1.3.6.1.4.1.6296.101.16.18.1.1.1.8 | ColumnsleMplsTpLpsCfgInfoRapidTxInterval | read-only | current | The Rapid Tx interval in micro-Seconds. Represents the time interval to send the LPS packet to the other end, when there is a change in state of Linear Protect… |
| 1.3.6.1.4.1.6296.101.16.18.1.1.1.9 | ColumnsleMplsTpLpsCfgInfoSwitchOver | read-only | current | this object used for switch the traffic to the back up path. |
| 1.3.6.1.4.1.6296.101.16.18.1.1.1.10 | ColumnsleMplsTpLpsCfgInfoLockOut | read-only | current | this is object is used for preventing the swith traffic by the protection path. |
| 1.3.6.1.4.1.6296.101.16.18.1.1.1.11 | ColumnsleMplsTpLpsCfgInfoHoldOffTimer | read-only | current | this object used for show the hold off timer. |
| 1.3.6.1.4.1.6296.101.16.18.1.1.1.12 | ColumnsleMplsTpLpsCfgInfoActivePath | read-only | current | This object say which path is Active . |
| 1.3.6.1.4.1.6296.101.16.18.1.1.1.13 | ColumnsleMplsTpLpsCfgInfoOperationState | read-only | current | this object says Operational Status of LPS. The LPS is between PE to PE. |
| 1.3.6.1.4.1.6296.101.16.18.1.1.1.14 | ColumnsleMplsTpLpsCfgInfoEventStatus | read-only | current | This is object says EVENT Status of LPS protection . |
| 1.3.6.1.4.1.6296.101.16.18.1.2 | NodesleMplsTpLpsCfgControl | |||
| 1.3.6.1.4.1.6296.101.16.18.1.2.1 | ScalarsleMplsTpLpsCfgControlRequest | read-write | current | the configuration commands, and user can configure functions via setting this entry as proper value. |
| 1.3.6.1.4.1.6296.101.16.18.1.2.2 | ScalarsleMplsTpLpsCfgControlStatus | read-only | current | status of user command. User have to check this value as .busy. or .idle. before do setRequest. |
| 1.3.6.1.4.1.6296.101.16.18.1.2.3 | ScalarsleMplsTpLpsCfgControlTimer | read-write | current | the wait-time until setRequest end. In case of short-time command, this value is 0 |
| 1.3.6.1.4.1.6296.101.16.18.1.2.4 | ScalarsleMplsTpLpsCfgControlTimeStamp | read-only | current | the time stamp of the last command. (don.t care) |
| 1.3.6.1.4.1.6296.101.16.18.1.2.5 | ScalarsleMplsTpLpsCfgControlReqResult | read-only | current | Result of the last command. |
| 1.3.6.1.4.1.6296.101.16.18.1.2.6 | ScalarsleMplsTpLpsCfgControlGroupName | read-write | current | Textual name represents the sleMplsTp tp protection group. Each Protection Group is identified by a unique protection group name. |
| 1.3.6.1.4.1.6296.101.16.18.1.2.7 | ScalarsleMplsTpLpsCfgControlMode | read-write | current | The architectural mode of the Protection group. This can either be 1+1, 1:1, 1:n. 1+1 In the 1+1 protection scheme, a fully dedicated protection entity is allo… |
| 1.3.6.1.4.1.6296.101.16.18.1.2.8 | ScalarsleMplsTpLpsCfgControlProtectionScheme | read-write | current | The object represents the operational scheme of protection switching group. The protection scheme may either be unidirectional or bidirectional. bidirectional … |
| 1.3.6.1.4.1.6296.101.16.18.1.2.9 | ScalarsleMplsTpLpsCfgControlRevertive | read-write | current | This object represents the reversion mode of the Linear Protection Switching group. The reversion mode of protection mechanism may be either revertive or non-r… |
| 1.3.6.1.4.1.6296.101.16.18.1.2.10 | ScalarsleMplsTpLpsCfgControlWtr | read-write | current | This object hold the Wait To Restore timer value in seconds. The WTR timer is used to delay reversion of PSC state to Normal state when recovering from a failu… |
| 1.3.6.1.4.1.6296.101.16.18.1.2.11 | ScalarsleMplsTpLpsCfgControlContinualTxInterval | read-write | current | The Continual Tx Time in Seconds. Represents the time interval to send the continual LPS packet to the other end based on the current state. |
| 1.3.6.1.4.1.6296.101.16.18.1.2.12 | ScalarsleMplsTpLpsCfgControlRapidTxInterval | read-write | current | The Rapid Tx interval in micro-Seconds. Represents the time interval to send the LPS packet to the other end, when there is a change in state of Linear Protect… |
| 1.3.6.1.4.1.6296.101.16.18.1.2.13 | ScalarsleMplsTpLpsCfgControlswitchOver | read-write | current | this object used for switch the traffic to the back up path. |
| 1.3.6.1.4.1.6296.101.16.18.1.2.14 | ScalarsleMplsTpLpsCfgControlLockOut | read-write | current | this is object is used for preventing the swith traffic by the protection path. |
| 1.3.6.1.4.1.6296.101.16.18.1.2.15 | ScalarsleMplsTpLpsCfgControlHoldOffTimer | read-write | current | This object is used to set the holdofftimer |
| 1.3.6.1.4.1.6296.101.16.18.2 | NodesleMplsTpLpsMeCfg | |||
| 1.3.6.1.4.1.6296.101.16.18.2.1 | TablesleMplsTpLpsMeCfgInfoTable | not-accessible | current | This table lists Maintenance Association that have been configured in Protection groups. |
| 1.3.6.1.4.1.6296.101.16.18.2.1.1 | RowsleMplsTpLpsMeCfgInfoEntry | not-accessible | current | A conceptual row in the sleMplsTpLpsMeCfgInfoTable. |
| 1.3.6.1.4.1.6296.101.16.18.2.1.1.1 | ColumnsleMplsTpLpsMeCfgInfoMegIndex | not-accessible | current | Uniquely identifies a maintenance entity index within a MEG. |
| 1.3.6.1.4.1.6296.101.16.18.2.1.1.2 | ColumnsleMplsTpLpsMeCfgInfoMeIndex | not-accessible | current | This object denotes the ME name, each Maintenance Entity has unique name within MEG. |
| 1.3.6.1.4.1.6296.101.16.18.2.1.1.3 | ColumnsleMplsTpLpsMeCfgInfoMPId | not-accessible | current | Indicates the maintenance point index, used to create multiple MEPs in a node of single ME. The value of this object can be MEP index or MIP index. Managers sh… |
| 1.3.6.1.4.1.6296.101.16.18.2.1.1.4 | ColumnsleMplsTpLspMeCfgInfoGroupIndex | read-only | current | Textual name represents the sleMplsTp tp protection group. Each Protection Group is identified by a unique protection group name. |
| 1.3.6.1.4.1.6296.101.16.18.2.1.1.5 | ColumnsleMplsTpLpsMeCfgInfoState | read-write | current | This object represents the operational state of the ME as either primary or backup |
| 1.3.6.1.4.1.6296.101.16.18.2.2 | NodesleMplsTpLpsMeCfgControl | |||
| 1.3.6.1.4.1.6296.101.16.18.2.2.1 | ScalarsleMplsTpLpsMeCfgControlRequest | read-write | current | the configuration commands, and user can configure functions via setting this entry as proper value. |
| 1.3.6.1.4.1.6296.101.16.18.2.2.2 | ScalarsleMplsTpLpsMeCfgControlStatus | read-only | current | status of user command. User have to check this value as .busy. or .idle. before do setRequest. |
| 1.3.6.1.4.1.6296.101.16.18.2.2.3 | ScalarsleMplsTpLpsMeCfgControlTimer | read-write | current | the wait-time until setRequest end. In case of short-time command, this value is 0 |
| 1.3.6.1.4.1.6296.101.16.18.2.2.4 | ScalarsleMplsTpLpsMeCfgControlTimeStamp | read-only | current | the time stamp of the last command. (don.t care) |
| 1.3.6.1.4.1.6296.101.16.18.2.2.5 | ScalarsleMplsTpLpsMeCfgControlReqResult | read-only | current | Result of the last command. |
| 1.3.6.1.4.1.6296.101.16.18.2.2.6 | ScalarsleMplsTpLpsMeCfgControlMegName | read-write | current | Uniquely identifies a maintenance entity index within a MEG |
| 1.3.6.1.4.1.6296.101.16.18.2.2.7 | ScalarsleMplsTpLpsMeCfgControlMeName | read-write | current | This object denotes the ME name, each Maintenance Entity has unique name within MEG. |
| 1.3.6.1.4.1.6296.101.16.18.2.2.8 | ScalarsleMplsTpLpsMeCfgControlMpId | read-write | current | |
| 1.3.6.1.4.1.6296.101.16.18.2.2.9 | ScalarsleMplsTpLpsMeCfgControlGroupName | read-write | current | This object holds the Protection group index wherein this ME included in. If this ME is not part of a protection group this value is set to 0. |
| 1.3.6.1.4.1.6296.101.16.18.2.2.10 | ScalarsleMplsTpLpsMeCfgControlState | read-write | current | This object represents the operational state of the ME as either primary or backup |