SLE-MPLS-TP-OAM-MIB
88 objects
sleMpls
Imported Objects
| DASAN-SMI | sleMgmt |
| IF-MIB | ifCounterDiscontinuityGroup ifGeneralInformationGroup |
| MPLS-TC-STD-MIB | mplsStdMIB |
| SLE-TC-MIB | SleControlRequestResultType SleControlStatusType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Gauge32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 zeroDotZero |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6296.101.16 | IdentitysleMpls | current | SLE MPLS. | |
| 1.3.6.1.4.1.6296.101.16.17 | IdentitysleMplsTpOam | sleMpls | ||
| 1.3.6.1.4.1.6296.101.16.17.1 | NodesleMplsTpOamMeg | |||
| 1.3.6.1.4.1.6296.101.16.17.1.1 | TablesleMplsTpOamMegInfoTable | read-only | current | This table contains information about the Maintenance Entity Groups (MEG). MEG as mentioned in MPLS-TP OAM framework defines a set of one or more maintenance e… |
| 1.3.6.1.4.1.6296.101.16.17.1.1.1 | RowsleMplsTpOamMegInfoEntry | read-only | current | An entry in this table represents MPLS-TP MEG. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS-TP OAM Framework… |
| 1.3.6.1.4.1.6296.101.16.17.1.1.1.1 | ColumnsleMplsTpOamMegInfoIndex | read-only | current | Index for the conceptual row identifying a MEG within this MEG table. |
| 1.3.6.1.4.1.6296.101.16.17.1.1.1.2 | ColumnsleMplsTpOamMegInfoName | read-only | current | Each Maintenance Entity Group has unique name amongst all those used or available to a service provider or operator. It facilitates easy identification of admi… |
| 1.3.6.1.4.1.6296.101.16.17.1.1.1.3 | ColumnsleMplsTpOamMegInfoOperatorType | read-only | current | This object is used to set the IETF or ITUT. |
| 1.3.6.1.4.1.6296.101.16.17.1.1.1.4 | ColumnsleMplsTpOamMegInfoServiceType | read-only | current | Indicates the service type for which the MEG is created. If the service type indicates lsp, the service pointer in sleMplsOamMe points to the TE tunnel table e… |
| 1.3.6.1.4.1.6296.101.16.17.1.1.1.5 | ColumnsleMplsTpOamMegInfoMegLevel | read-only | current | This variable is used to for level for ITUT. When a row in this table is in active object cannot be changed. |
| 1.3.6.1.4.1.6296.101.16.17.1.1.1.6 | ColumnsleMplsTpOamMegInfoOperStatus | read-only | current | This object specifies the operational status of the Maintenance Entity Group (MEG). This object is used to send the notification to the SNMP manager about the … |
| 1.3.6.1.4.1.6296.101.16.17.1.2 | NodesleMplsTpOamMegControl | |||
| 1.3.6.1.4.1.6296.101.16.17.1.2.1 | ScalarsleMplsTpOamMegControlRequest | read-write | current | the configuration commands, and user can configure functions via setting this entry as proper value. |
| 1.3.6.1.4.1.6296.101.16.17.1.2.2 | ScalarsleMplsTpOamMegControlStatus | read-only | current | status of user command. User have to check this value as .busy. or .idle. before do setRequest. |
| 1.3.6.1.4.1.6296.101.16.17.1.2.3 | ScalarsleMplsTpOamMegControlTimer | read-write | current | the wait-time until setRequest end. In case of short-time command, this value is 0 |
| 1.3.6.1.4.1.6296.101.16.17.1.2.4 | ScalarsleMplsTpOamMegControlTimeStamp | read-only | current | the time stamp of the last command. (don.t care) |
| 1.3.6.1.4.1.6296.101.16.17.1.2.5 | ScalarsleMplsTpOamMegControlReqResult | read-only | current | Result of the last command. |
| 1.3.6.1.4.1.6296.101.16.17.1.2.6 | ScalarsleMplsTpOamMegControlName | read-write | current | Each Maintenance Entity Group has unique name amongst all those used or available to a service provider or operator. It facilitates easy identification of admi… |
| 1.3.6.1.4.1.6296.101.16.17.1.2.7 | ScalarsleMplsTpOamMegControlOperatorType | read-write | current | Indicates the operator type for MEG. Conceptual rows having 'iccBased' as operator type, should have valid values for the objects sleMplsTpOamMegControlIdIcc a… |
| 1.3.6.1.4.1.6296.101.16.17.1.2.8 | ScalarsleMplsTpOamMegControlServiceType | read-write | current | Indicates the service type for which the MEG is created. If the service type indicates lsp, the service pointer in sleMplsOamMe points to the TE tunnel table e… |
| 1.3.6.1.4.1.6296.101.16.17.1.2.9 | ScalarsleMplsTpOamMegControlLevel | read-write | current | This variable is used to for level for ITUT. When a row in this table is in active object cannot be changed. |
| 1.3.6.1.4.1.6296.101.16.17.2 | NodesleMplsTpOamMaintananceEntity | |||
| 1.3.6.1.4.1.6296.101.16.17.2.1 | TablesleMplsTpOamMaintanceEntityInfoTable | read-only | current | This table contains MPLS-TP maintenance entity information. ME is some portion of a transport path that requires management bounded by two points (called MEPs)… |
| 1.3.6.1.4.1.6296.101.16.17.2.1.1 | RowsleMplsTpOamMaintanceEntityInfoEntry | read-only | current | An entry in this table represents MPLS-TP maintenance entity. This entry represents the ME if the source and sink MEPs are defined. A ME is a p2p entity. One M… |
| 1.3.6.1.4.1.6296.101.16.17.2.1.1.1 | ColumnsleMplsTpOamMaintanceEntityInfoMeIndex | read-only | current | Uniquely identifies a maintenance entity index within a MEG. |
| 1.3.6.1.4.1.6296.101.16.17.2.1.1.2 | ColumnsleMplsTpOamMaintanceEntityInfoMpIndex | not-accessible | current | Indicates the maintenance point index, used to create multiple MEPs in a node of single ME. The value of this object can be MEP index or MIP index. Managers sh… |
| 1.3.6.1.4.1.6296.101.16.17.2.1.1.3 | ColumnsleMplsOamMaintenanceEntityInfoMeName | read-only | current | This object denotes the ME name, each Maintenance Entity has unique name within MEG. |
| 1.3.6.1.4.1.6296.101.16.17.2.1.1.4 | ColumnsleMplsTpOamMaintanceEntityInfoMpType | read-only | current | Indicates the maintenance point type within the MEG. The object should have the value mep (1), only in the Ingress or Egress nodes of the transport path. The o… |
| 1.3.6.1.4.1.6296.101.16.17.2.1.1.5 | ColumnsleMplsOamMaintenanceEntityInfoServiceTunnelName | read-only | current | This variable represents a pointer to the MPLS-TP transport path. This value may point at an entry in the sleMplsTunnelEntry ifsleMplsOamMaintenanceEntitygServ… |
| 1.3.6.1.4.1.6296.101.16.17.2.1.1.6 | ColumnsleMplsOamMaintenanceEntityInfoServiceVcId | read-only | current | This variable represents a pointer to the MPLS-TP transport path. This value may point at an entry in the sleMplsTunnelEntry ifsleMplsOamMaintenanceEntitygServ… |
| 1.3.6.1.4.1.6296.101.16.17.2.1.1.7 | ColumnsleMplsOamMaintenanceEntityInfoServiceDatalink | read-only | current | This variable represents a pointer to the MPLS-TP transport path. This value may point at an entry in the sleMplsTunnelEntry ifsleMplsOamMaintenanceEntitygServ… |
| 1.3.6.1.4.1.6296.101.16.17.2.1.1.8 | ColumnsleMplsTpOamMaintanceEntityInfoCcInterval | read-only | current | This variable is used to keep the continuty check interval for ITUT. When a row in this table is in active object cannot be changed. |
| 1.3.6.1.4.1.6296.101.16.17.2.1.1.9 | ColumnsleMplsTpOamMaintanceEntityInfoRemoteMpId | read-only | current | This variable is used for setting the remote mep id |
| 1.3.6.1.4.1.6296.101.16.17.2.1.1.10 | ColumnsleMplsTpOamMaintanceEntityInfoRemoteCc | read-create | current | Global uniqueness is assured by concatenating the ICC with a Country Code (CC). The Country Code (alpha-2) is a string of two alphabetic characters represented… |
| 1.3.6.1.4.1.6296.101.16.17.2.1.1.11 | ColumnsleMplsTpOamMaintanceEntityInfoRemoteIcc | read-only | current | Unique code assigned to Network Operator or Service Provider maintained by ITU-T. The ITU Carrier Code used to form MEGID. This object MUST contain a non-null … |
| 1.3.6.1.4.1.6296.101.16.17.2.1.1.12 | ColumnsleMplsTpOamMaintanceEntityInfoRemoteMeg | read-only | current | Unique code assigned by Network Operator or Service Provider and is appended to mplsOamIdMegIdIcc to form the MEGID. This object MUST contain a non-null ICC va… |
| 1.3.6.1.4.1.6296.101.16.17.2.1.1.13 | ColumnsleMplsTpOamMaintanceEntityInfoRemoteMpdirection | read-only | current | Indicates the maintenance point type within the MEG. This object is used to display the forward and reverse remote mep of Transist router . |
| 1.3.6.1.4.1.6296.101.16.17.2.2 | NodesleMplsTpOamMaintanceEntityControl | |||
| 1.3.6.1.4.1.6296.101.16.17.2.2.1 | ScalarsleMplsTpOamMaintanceEntityRequest | read-write | current | the configuration commands, and user can configure functions via setting this entry as proper value. |
| 1.3.6.1.4.1.6296.101.16.17.2.2.2 | ScalarsleMplsTpOamMaintanceEntityControlStatus | read-only | current | status of user command. User have to check this value as .busy. or .idle. before do setRequest. |
| 1.3.6.1.4.1.6296.101.16.17.2.2.3 | ScalarsleMplsTpOamMaintanceEntityControlTimer | read-write | current | the wait-time until setRequest end. In case of short-time command, this value is 0 |
| 1.3.6.1.4.1.6296.101.16.17.2.2.4 | ScalarsleMplsTpOamMaintanceEntityControlTimeStamp | read-only | current | the time stamp of the last command. (don.t care) |
| 1.3.6.1.4.1.6296.101.16.17.2.2.5 | ScalarsleMplsTpOamMaintanceEntityControlReqResult | read-only | current | Result of the last command. |
| 1.3.6.1.4.1.6296.101.16.17.2.2.6 | ScalarsleMplsTpOamMaintanceEntityControlMegName | read-write | current | Uniquely identifies a maintenance entity index within a MEG. |
| 1.3.6.1.4.1.6296.101.16.17.2.2.7 | ScalarsleMplsTpOamMaintanceEntityControlMeName | read-write | current | This object denotes the ME name, each Maintenance Entity has unique name within MEG. |
| 1.3.6.1.4.1.6296.101.16.17.2.2.8 | ScalarsleMplsTpOamMaintanceEntityControlMepId | read-write | current | Uniquely identifies a maintenance entity index within a MEP . |
| 1.3.6.1.4.1.6296.101.16.17.2.2.9 | ScalarsleMplsTpOamMaintanceEntityControlMpType | read-write | current | Indicates the maintenance point type within the MEG. The object should have the value mep (1), only in the Ingress or Egress nodes of the transport path. The o… |
| 1.3.6.1.4.1.6296.101.16.17.2.2.10 | ScalarsleMplsTpOamMaintanceEntityControlServiceValue | read-write | current | This variable represents a pointer to the MPLS-TP transport path. This value may point at an entry in the sleMplsTunnelEntry if sleMplsOamMeControlgServiceType… |
| 1.3.6.1.4.1.6296.101.16.17.2.2.11 | ScalarsleMplsTpOamMaintanceEntityControlCcInterval | read-write | current | This variable is used to keep the continuty check interval for ITUT. When a row in this table is in active object cannot be changed. |
| 1.3.6.1.4.1.6296.101.16.17.2.2.12 | ScalarsleMplsTpOamMaintanceEntityControlRemoteMpId | read-only | current | This variable is used for setting the remote mep id |
| 1.3.6.1.4.1.6296.101.16.17.2.2.13 | ScalarsleMplsTpOamMaintanceEntityControlRemoteCc | read-write | current | Global uniqueness is assured by concatenating the ICC with a Country Code (CC). The Country Code (alpha-2) is a string of two alphabetic characters represented… |
| 1.3.6.1.4.1.6296.101.16.17.2.2.14 | ScalarsleMplsTpOamMaintanceEntityControlRemoteIcc | read-write | current | Unique code assigned to Network Operator or Service Provider maintained by ITU-T. The ITU Carrier Code used to form MEGID. This object MUST contain a non-null … |
| 1.3.6.1.4.1.6296.101.16.17.2.2.15 | ScalarsleMplsTpOamMaintanceEntityControlRemoteMeg | read-write | current | Unique code assigned by Network Operator or Service Provider and is appended to mplsOamIdMegIdIcc to form the MEGID. This object MUST contain a non-null ICC va… |
| 1.3.6.1.4.1.6296.101.16.17.2.2.16 | ScalarsleMplsTpOamMaintanceEntityControlRemoteMpDirection | read-write | current | Indicates the direction of the MEP. This object should be configured if sleMplsOamMeControlMpType is configured as mep (1). |
| 1.3.6.1.4.1.6296.101.16.17.3 | NodesleMplsTpOamFm | |||
| 1.3.6.1.4.1.6296.101.16.17.3.1 | TablesleMplsTpOamFmInfoTable | read-only | current | |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1 | RowsleMplsTpOamFmInfoEntry | read-only | current | An entry in this table represents MPLS-TP maintenance entity. |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.1 | ColumnsleMplsTpOamFmInfoMeIndex | read-only | current | Uniquely identifies a maintenance entity index within a MEG. |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.2 | ColumnsleMplsTpOamFmInfoMpIndex | not-accessible | current | Indicates the maintenance point index, used to create multiple MEPs in a node of single ME. The value of this object can be MEP index or MIP index. Managers sh… |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.3 | ColumnsleMplsTpOamFmInfoFaultManagement | read-only | current | Fault Managment for IETF shows enable or disable |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.4 | ColumnsleMplsTpOamFmInfoRefreshTime | read-only | current | This Object is used in IETF-based Fault Management RefreshTimer. |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.5 | ColumnsleMplsTpOamFmInfoLockInstruct | read-only | current | Lock instruct for IETF shows enable or disable |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.6 | ColumnsleMplsTpOamFmInfoLockInstructRefreshTime | read-only | current | This Object is used in IETF-based lock RefreshTimer. |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.7 | ColumnsleMplsTpOamFmInfoAlarmIndication | read-only | current | Alarm indication for ITUT shows enable or disable. |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.8 | ColumnsleMplsTpOamFmInfoAlarmIndicationInterval | read-only | current | This is object to display the itut alarm indication interval value. |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.9 | ColumnsleMplsTpOamFmInfoAlarmIndicationLevel | read-only | current | This object to display the Itut alarm indication Level value. |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.10 | ColumnsleMplsTpOamFmInfoLock | read-only | current | This Object is used in ITUT-based lock. This object will enable/disable the lock |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.11 | ColumnsleMplsTpOamFmInfoLockInterval | read-only | current | This object is used to display the ITUT based Lock Interval. |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.12 | ColumnsleMplsTpOamFmInfoLockLevel | read-only | current | This object is used to Display the ITUT based Lock Level. |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.13 | ColumnsleMplsTpOamFmInfoLoopBack | read-only | current | This Object is used in IETF-based loop back. This will show enable/disable loop back . |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.14 | ColumnsleMplsTpOamFmInfoLoopBackStatus | read-only | current | This object to display the Status of IETF Based LoopBackStatus. |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.15 | ColumnsleMplsTpOamFmInfoLockInstructStatus | read-only | current | This object to display the Status of IETF Based LockInstruct. |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.16 | ColumnsleMplsTpOamFmInfoFaultManagementStatus | read-only | current | This object to display the Status of IETF Based FaultManagement. |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.17 | ColumnsleMplsTpOamFmInfoCcCvStatus | read-only | current | This object to display the Status of IETF Based CC-CV. |
| 1.3.6.1.4.1.6296.101.16.17.3.1.1.18 | ColumnsleMplsTpOamFmInfoStatus | read-only | current | This object is used to display the IETF Status 1- path not Associated. 2- path associated with another me. 3- path down 4- received AIS Message. 5- received LK… |
| 1.3.6.1.4.1.6296.101.16.17.3.2 | NodesleMplsTpOamFmControlTable | |||
| 1.3.6.1.4.1.6296.101.16.17.3.2.1 | ScalarsleMplsTpOamFmControlRequest | read-write | current | the configuration commands, and user can configure functions via setting this entry as proper value. |
| 1.3.6.1.4.1.6296.101.16.17.3.2.2 | ScalarsleMplsTpOamFmControlStatus | read-only | current | status of user command. User have to check this value as .busy. or .idle. before do setRequest. |
| 1.3.6.1.4.1.6296.101.16.17.3.2.3 | ScalarsleMplsTpOamFmControlTimer | read-write | current | the wait-time until setRequest end. In case of short-time command, this value is 0 |
| 1.3.6.1.4.1.6296.101.16.17.3.2.4 | ScalarsleMplsTpOamFmControlTimeStamp | read-only | current | the time stamp of the last command. (don.t care) |
| 1.3.6.1.4.1.6296.101.16.17.3.2.5 | ScalarsleMplsTpOamFmControlReqResult | read-only | current | Result of the last command. |
| 1.3.6.1.4.1.6296.101.16.17.3.2.6 | ScalarsleMplsTpOamFmControlMegName | read-write | current | Uniquely identifies a maintenance entity index within a MEG. |
| 1.3.6.1.4.1.6296.101.16.17.3.2.7 | ScalarsleMplsTpOamFmControlMeName | read-write | current | Uniquely identifies a maintenance entity index within a ME. |
| 1.3.6.1.4.1.6296.101.16.17.3.2.8 | ScalarsleMplsTpOamFmControlMepId | read-write | current | Uniquely identifies a maintenance entity index within a MEP. |
| 1.3.6.1.4.1.6296.101.16.17.3.2.9 | ScalarsleMplsTpOamFmInit | read-write | current | This variable is used for setting the fault Measurments for IETF/ITUT based upon gloable configuration 1) Fault measurment is for IETF 2) Lock-Instruct is for … |
| 1.3.6.1.4.1.6296.101.16.17.3.2.10 | ScalarsleMplsTpOamFmControlRefreshTime | read-write | current | This varible is used to set the Refresh Time for IETF of 2 objects ie., Fault managment and Lock Instruct 1) Fault managment range (1-20) 2) Lock-Instruct rang… |
| 1.3.6.1.4.1.6296.101.16.17.3.2.11 | ScalarsleMplsTpOamFmControlInterval | read-write | current | This variable is used to set the interval for 2 alarm-inidaction and lock objects of ITUT |
| 1.3.6.1.4.1.6296.101.16.17.3.2.12 | ScalarsleMplsTpOamFmControlLevel | read-write | current | This varible is used to set the level for Alarm indication and lock objects of ITUT |