SLE-MPLS-TP-TUNNEL-STATISTICS-MIB
23 objects
This mib contains the managed objects for MPLS-TP lsp statistics.
Imported Objects
| DASAN-SMI | sleMgmt |
| MPLS-TC-STD-MIB | mplsStdMIB |
| SLE-TC-MIB | SleControlRequestResultType SleControlStatusType |
| SNMPv2-SMI | Counter64 Gauge32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 zeroDotZero |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6296.101.16 | NodesleMpls | |||
| 1.3.6.1.4.1.6296.101.16.20 | IdentitysleMplsTpTunnelStats | This mib contains the managed objects for MPLS-TP lsp statistics. | ||
| 1.3.6.1.4.1.6296.101.16.20.1 | NodesleMplsTpTunnelStatsTable | |||
| 1.3.6.1.4.1.6296.101.16.20.1.1 | TablesleMplsTpTunnelStatsInfoTable | not-accessible | current | This table contains the information about the statistics of LSP which exist on the LSR or LER. |
| 1.3.6.1.4.1.6296.101.16.20.1.1.1 | RowsleMplsTpTunnelStatsInfoEntry | not-accessible | current | An entry in this table represents the statistics of LSP. The LSP can be creates by network administator or SNMP agent as instruct by the MPLS-TP |
| 1.3.6.1.4.1.6296.101.16.20.1.1.1.1 | ColumnsleMplsTpTunnelStatsInfoIndex | not-accessible | current | Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by re… |
| 1.3.6.1.4.1.6296.101.16.20.1.1.1.2 | ColumnsleMplsTpTunnelStatsInfoTunnelName | read-only | current | The tunnel name of the LSP. |
| 1.3.6.1.4.1.6296.101.16.20.1.1.1.3 | ColumnsleMplsTpTunnelStatsInfoRole | read-only | current | This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value … |
| 1.3.6.1.4.1.6296.101.16.20.1.1.1.4 | ColumnsleMplsTpTunnelStatsInfoFwdTxPkts | read-only | current | The number of packet sent through the LSP. |
| 1.3.6.1.4.1.6296.101.16.20.1.1.1.5 | ColumnsleMplsTpTunnelStatsInfoFwdTxBytes | read-only | current | The total bytes sent through the LSP. |
| 1.3.6.1.4.1.6296.101.16.20.1.1.1.6 | ColumnsleMplsTpTunnelStatsInfoFwdRxPkts | read-only | current | The number of packet recieved through the LSP. |
| 1.3.6.1.4.1.6296.101.16.20.1.1.1.7 | ColumnsleMplsTpTunnelStatsInfoFwdRxBytes | read-only | current | The total bytes recieved through the LSP. |
| 1.3.6.1.4.1.6296.101.16.20.1.1.1.8 | ColumnsleMplsTpTunnelStatsInfoRevTxPkts | read-only | current | The number of packet sent through the LSP. |
| 1.3.6.1.4.1.6296.101.16.20.1.1.1.9 | ColumnsleMplsTpTunnelStatsInfoRevTxBytes | read-only | current | The total bytes sent through the LSP. |
| 1.3.6.1.4.1.6296.101.16.20.1.1.1.10 | ColumnsleMplsTpTunnelStatsInfoRevRxPkts | read-only | current | The number of packet recieved through the LSP. |
| 1.3.6.1.4.1.6296.101.16.20.1.1.1.11 | ColumnsleMplsTpTunnelStatsInfoRevRxBytes | read-only | current | The total bytes recieved through the LSP. |
| 1.3.6.1.4.1.6296.101.16.20.1.2 | NodesleMplsTpTunnelStatsControl | |||
| 1.3.6.1.4.1.6296.101.16.20.1.2.1 | ScalarsleMplsTpTunnelStatsControlRequest | read-write | current | This object holds the possible read-write columns that can be modified in the Vrf table. For each read-write column of Vrf table, a Set Operation control value… |
| 1.3.6.1.4.1.6296.101.16.20.1.2.2 | ScalarsleMplsTpTunnelStatsControlStatus | read-only | current | This object displays the status of the configuration done. |
| 1.3.6.1.4.1.6296.101.16.20.1.2.3 | ScalarsleMplsTpTunnelStatsControlTimer | read-write | current | This object is based on the SLE style where a timer is configured for every control table. |
| 1.3.6.1.4.1.6296.101.16.20.1.2.4 | ScalarsleMplsTpTunnelStatsControlTimeStamp | read-only | current | This object specifies the time at which the configuration is done. |
| 1.3.6.1.4.1.6296.101.16.20.1.2.5 | ScalarsleMplsTpTunnelStatsReqResult | read-only | current | The standard result of the SET operation is stored here. |
| 1.3.6.1.4.1.6296.101.16.20.1.2.6 | ScalarsleMplsTpTunnelStatsControlName | read-write | current | The tunnel name of the LSP. To clear all the tunnel statistics, give the name as 'all'. To clear the specific tunnel, give the specific tunnel name. |