SLE-MPLS-VPLS-MIB
148 objects
This MIB module containg the managed object definition for MPLS-TP Virtual Private LAN Service(VPLS) operation. copyright (c) 2015 Dasan Networks and the persons identified as authors of the code. All rights reserved.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6296.101.16 | IdentitysleMpls | current | SLE MPLS. | |
| 1.3.6.1.4.1.6296.101.16.55 | IdentitysleMplsVpls | This MIB module containg the managed object definition for MPLS-TP Virtual Private LAN Service(VPLS) operation. copyright (c) 2015 Dasan Networks and the perso… | ||
| 1.3.6.1.4.1.6296.101.16.55.1 | NodesleMplsVplsTable | |||
| 1.3.6.1.4.1.6296.101.16.55.1.1 | TablesleMplsVplsInfoTable | not-accessible | current | This table specifies information for configuring and status monitoring that is common to all service types and PSN types of VPLS. |
| 1.3.6.1.4.1.6296.101.16.55.1.1.1 | RowsleMplsVplsInfoEntry | not-accessible | current | A row in this table is indexed by sleMplsPwNameInfo. |
| 1.3.6.1.4.1.6296.101.16.55.1.1.1.1 | ColumnsleMplsVplsInfoId | not-accessible | current | VPLS Id. It identifies an entry on this table. |
| 1.3.6.1.4.1.6296.101.16.55.1.1.1.2 | ColumnsleMplsVplsInfoName | read-only | current | VPLS Name. It identifies an entry on this table. |
| 1.3.6.1.4.1.6296.101.16.55.1.1.1.3 | ColumnsleMplsVplsInfoMacLearning | read-only | current | Use to indentify the MAC Learning status. |
| 1.3.6.1.4.1.6296.101.16.55.1.1.1.4 | ColumnsleMplsVplsInfoMacLearningLimit | read-only | current | MAC Learning Limit of the VPLS. 32767 is default mac learning limit. |
| 1.3.6.1.4.1.6296.101.16.55.1.1.1.5 | ColumnsleMplsVplsInfoServiceType | read-only | current | Service type of VPLS. |
| 1.3.6.1.4.1.6296.101.16.55.1.1.1.6 | ColumnsleMplsVplsInfoSignallingProto | read-only | current | Signalling proto id of VPLS. |
| 1.3.6.1.4.1.6296.101.16.55.1.1.1.7 | ColumnsleMplsVplsInfoGroupId | read-only | current | Group Id of VPLS. |
| 1.3.6.1.4.1.6296.101.16.55.1.1.1.8 | ColumnsleMplsVplsInfoDescription | read-only | current | Description of VPLS. |
| 1.3.6.1.4.1.6296.101.16.55.1.1.1.9 | ColumnsleMplsVplsInfoMtu | read-only | current | Mtu of VPLS. |
| 1.3.6.1.4.1.6296.101.16.55.1.1.1.10 | ColumnsleMplsVplsInfoL2protocolDiscard | read-only | current | |
| 1.3.6.1.4.1.6296.101.16.55.1.1.1.11 | ColumnsleMplsVplsInfoL2protocolPeer | read-only | current | |
| 1.3.6.1.4.1.6296.101.16.55.1.1.1.12 | ColumnsleMplsVplsInfoL2protocolTunnel | read-only | current | |
| 1.3.6.1.4.1.6296.101.16.55.1.1.1.13 | ColumnsleMplsVplsInfoRouteDistribute | read-only | current | |
| 1.3.6.1.4.1.6296.101.16.55.1.1.1.14 | ColumnsleMplsVplsInfoRouteTarget | read-only | current | |
| 1.3.6.1.4.1.6296.101.16.55.1.1.1.15 | ColumnsleMplsVplsInfoVeId | read-only | current | |
| 1.3.6.1.4.1.6296.101.16.55.1.1.1.16 | ColumnsleMplsVplsInfoVeRange | read-only | current | |
| 1.3.6.1.4.1.6296.101.16.55.1.2 | NodesleMplsVplsControl | |||
| 1.3.6.1.4.1.6296.101.16.55.1.2.1 | ScalarsleMplsVplsControlRequest | read-write | current | This object holds the possible read-write columns that can be modified in the sleMplsVpls table. For each read-write column of sleMplsVpls table, a Set Operati… |
| 1.3.6.1.4.1.6296.101.16.55.1.2.2 | ScalarsleMplsVplsControlStatus | read-only | current | This object displays the status of the configuration done. |
| 1.3.6.1.4.1.6296.101.16.55.1.2.3 | ScalarsleMplsVplsControlTimer | read-write | current | This object is based on the SLE style where a timer is configured for every control table. |
| 1.3.6.1.4.1.6296.101.16.55.1.2.4 | ScalarsleMplsVplsControlTimestamp | read-only | current | This object specifies the time at which the configuration is done. |
| 1.3.6.1.4.1.6296.101.16.55.1.2.5 | ScalarsleMplsVplsControlReqResult | read-only | current | The standard result of the SET operation is stored here. |
| 1.3.6.1.4.1.6296.101.16.55.1.2.6 | ScalarsleMplsVplsControlId | read-write | current | VPLS Id. It identifies an entry on this table. |
| 1.3.6.1.4.1.6296.101.16.55.1.2.7 | ScalarsleMplsVplsControlName | read-write | current | VPLS Name. It identifies an entry on this table. |
| 1.3.6.1.4.1.6296.101.16.55.1.2.8 | ScalarsleMplsVplsControlMacLearningLimit | read-write | current | MAC Learning Limit of the VPLS. |
| 1.3.6.1.4.1.6296.101.16.55.1.2.9 | ScalarsleMplsVplsControlServiceType | read-write | current | Service type of VPLS. |
| 1.3.6.1.4.1.6296.101.16.55.1.2.10 | ScalarsleMplsVplsControlGroupId | read-write | current | Group Id of VPLS. |
| 1.3.6.1.4.1.6296.101.16.55.1.2.11 | ScalarsleMplsVplsControlDescription | read-write | current | Description of VPLS. |
| 1.3.6.1.4.1.6296.101.16.55.1.2.12 | ScalarsleMplsVplsControlMtu | read-write | current | Mtu of VPLS. |
| 1.3.6.1.4.1.6296.101.16.55.1.2.13 | ScalarsleMplsVplsControlSignalingProto | read-write | current | |
| 1.3.6.1.4.1.6296.101.16.55.1.2.14 | ScalarsleMplsVplsControlL2Protocol | read-write | current | |
| 1.3.6.1.4.1.6296.101.16.55.1.2.15 | ScalarsleMplsVplsControlL2ProtocolType | read-write | current | |
| 1.3.6.1.4.1.6296.101.16.55.1.2.16 | ScalarsleMplsVplsControlRouteDistribute | read-write | current | |
| 1.3.6.1.4.1.6296.101.16.55.1.2.17 | ScalarsleMplsVplsControlRouteTarget | read-write | current | |
| 1.3.6.1.4.1.6296.101.16.55.1.2.18 | ScalarsleMplsVplsControlVeId | read-write | current | |
| 1.3.6.1.4.1.6296.101.16.55.1.2.19 | ScalarsleMplsVplsControlVeRange | read-write | current | |
| 1.3.6.1.4.1.6296.101.16.55.2 | NodesleMplsVplsIfTable | |||
| 1.3.6.1.4.1.6296.101.16.55.2.1 | TablesleMplsVplsIfInfoTable | not-accessible | current | This table specifies information for binding the VPLS on the MPLS-TP service provider interface. |
| 1.3.6.1.4.1.6296.101.16.55.2.1.1 | RowsleMplsVplsIfInfoEntry | not-accessible | current | A row in this table is indexed by sleMplsVplsIfInfoIndex. |
| 1.3.6.1.4.1.6296.101.16.55.2.1.1.1 | ColumnsleMplsVplsIfInfoIfIndex | not-accessible | current | Customer-facing/service-provider Interface Index. |
| 1.3.6.1.4.1.6296.101.16.55.2.1.1.2 | ColumnsleMplsVplsIfInfoName | not-accessible | current | VPLS Name which bind on interface. |
| 1.3.6.1.4.1.6296.101.16.55.2.1.1.3 | ColumnsleMplsVplsIfInfoServiceType | read-only | current | Service Type of VPLS bind on interface. |
| 1.3.6.1.4.1.6296.101.16.55.2.1.1.4 | ColumnsleMplsVplsIfInfoVlanId | read-only | current | VLAN Id of bind VPLS. It should have valid value when sleMplsPwIfServiceType is ethernetTagged. |
| 1.3.6.1.4.1.6296.101.16.55.2.1.1.5 | ColumnsleMplsVplsIfInfoInnerVlanId | read-only | current | Inner VLAN Id of bind VPLS. It should have valid value when sleMplsPwIfServiceType is ethernetTagged. |
| 1.3.6.1.4.1.6296.101.16.55.2.1.1.6 | ColumnsleMplsVplsIfInfoAction | read-only | current | VPLS operation.When pkt come with vlan-id, it says the operation towards what should do at egress.It is applicable at egress. |
| 1.3.6.1.4.1.6296.101.16.55.2.2 | NodesleMplsVplsIfControl | |||
| 1.3.6.1.4.1.6296.101.16.55.2.2.1 | ScalarsleMplsVplsIfControlRequest | read-write | current | This object holds the possible read-write columns that can be modified in the sleMplsVplsIf table. For each read-write column of sleMplsVplsIf table, a Set Ope… |
| 1.3.6.1.4.1.6296.101.16.55.2.2.2 | ScalarsleMplsVplsIfControlStatus | read-only | current | This object displays the status of the configuration done. |
| 1.3.6.1.4.1.6296.101.16.55.2.2.3 | ScalarsleMplsVplsIfControlTimer | read-write | current | This object is based on the SLE style where a timer is configured for every control table. |
| 1.3.6.1.4.1.6296.101.16.55.2.2.4 | ScalarsleMplsVplsIfControlTimestamp | read-only | current | This object specifies the time at which the configuration is done. |
| 1.3.6.1.4.1.6296.101.16.55.2.2.5 | ScalarsleMplsVplsIfControlReqResult | read-only | current | The standard result of the SET operation is stored here. |
| 1.3.6.1.4.1.6296.101.16.55.2.2.6 | ScalarsleMplsVplsIfControlIfIndex | read-write | current | Customer-facing/service-provider Interface Index. |
| 1.3.6.1.4.1.6296.101.16.55.2.2.7 | ScalarsleMplsVplsIfControlName | read-write | current | VPLS Name which bind on interface. |
| 1.3.6.1.4.1.6296.101.16.55.2.2.8 | ScalarsleMplsVplsIfControlServiceType | read-write | current | Service Type of VPLS bind on interface. |
| 1.3.6.1.4.1.6296.101.16.55.2.2.9 | ScalarsleMplsVplsIfControlVlanId | read-write | current | VLAN Id of bind VPLS. It should have valid value when sleMplsPwIfServiceType is ethernetTagged. |
| 1.3.6.1.4.1.6296.101.16.55.2.2.10 | ScalarsleMplsVplsIfControlInnerVlanId | read-write | current | Inner VLAN Id of bind VPLS. It should have valid value when sleMplsPwIfServiceType is ethernetTagged. |
| 1.3.6.1.4.1.6296.101.16.55.2.2.11 | ScalarsleMplsVplsIfControlAction | read-write | current | VPLS operation.When pkt come with vlan-id, it says the operation towards what should do at egress.It is applicable at egress. |
| 1.3.6.1.4.1.6296.101.16.55.3 | NodesleMplsVplsMeshTable | |||
| 1.3.6.1.4.1.6296.101.16.55.3.1 | TablesleMplsVplsMeshInfoTable | not-accessible | current | This table specifies information for VPLS Mesh peer's. |
| 1.3.6.1.4.1.6296.101.16.55.3.1.1 | RowsleMplsVplsMeshInfoEntry | not-accessible | current | A row in this table is indexed by sleMplsVplsInfoId and sleMplsVplsMeshInfoPeerId. |
| 1.3.6.1.4.1.6296.101.16.55.3.1.1.1 | ColumnsleMplsVplsMeshInfoPeerId | not-accessible | current | VPLS Mesh Peer Node Id. |
| 1.3.6.1.4.1.6296.101.16.55.3.1.1.2 | ColumnsleMplsVplsMeshInfoTunnelId | read-only | current | VPLS Mesh Peer Tunnel-id. |
| 1.3.6.1.4.1.6296.101.16.55.3.1.1.3 | ColumnsleMplsVplsMeshInfoOwner | read-only | current | VPLS Mesh Peer Tunnel-Name. |
| 1.3.6.1.4.1.6296.101.16.55.3.1.1.4 | ColumnsleMplsVplsMeshInfoTunnelPath | read-only | current | VPLS Mesh Peer Tunnel-Path. |
| 1.3.6.1.4.1.6296.101.16.55.3.1.1.5 | ColumnsleMplsVplsMeshInfoInLabel | read-only | current | VPLS Mesh Peer Fib entry In-label. |
| 1.3.6.1.4.1.6296.101.16.55.3.1.1.6 | ColumnsleMplsVplsMeshInfoOutLabel | read-only | current | VPLS Mesh Peer Fib entry Out-label. |
| 1.3.6.1.4.1.6296.101.16.55.3.1.1.7 | ColumnsleMplsVplsMeshInfoOutInterface | read-only | current | VPLS Mesh Peer Fib entry Out-Interface. |
| 1.3.6.1.4.1.6296.101.16.55.3.1.1.8 | ColumnsleMplsVplsMeshInfoTunnelLabel | read-only | current | VPLS Mesh Peer Tunnel out label. |
| 1.3.6.1.4.1.6296.101.16.55.3.1.1.9 | ColumnsleMplsVplsMeshInfoState | read-only | current | VPLS Mesh Peer State. |
| 1.3.6.1.4.1.6296.101.16.55.3.1.1.10 | ColumnsleMplsVplsMeshInfoQosServicePolicy | read-only | current | VPLS Mesh Peer qos input service policy. |
| 1.3.6.1.4.1.6296.101.16.55.3.2 | NodesleMplsVplsMeshControl | |||
| 1.3.6.1.4.1.6296.101.16.55.3.2.1 | ScalarsleMplsVplsMeshControlRequest | read-write | current | This object holds the possible read-write columns that can be modified in the sleMplsVplsMesh table. For each read-write column of sleMplsVplsMesh table, a Set… |
| 1.3.6.1.4.1.6296.101.16.55.3.2.2 | ScalarsleMplsVplsMeshControlStatus | read-only | current | This object displays the status of the configuration done. |
| 1.3.6.1.4.1.6296.101.16.55.3.2.3 | ScalarsleMplsVplsMeshControlTimer | read-write | current | This object is based on the SLE style where a timer is configured for every control table. |
| 1.3.6.1.4.1.6296.101.16.55.3.2.4 | ScalarsleMplsVplsMeshControlTimestamp | read-only | current | This object specifies the time at which the configuration is done. |
| 1.3.6.1.4.1.6296.101.16.55.3.2.5 | ScalarsleMplsVplsMeshControlReqResult | read-only | current | The standard result of the SET operation is stored here. |
| 1.3.6.1.4.1.6296.101.16.55.3.2.6 | ScalarsleMplsVplsMeshControlVplsId | read-write | current | VPLS ID which this peer should configure. |
| 1.3.6.1.4.1.6296.101.16.55.3.2.7 | ScalarsleMplsVplsMeshControlPeerId | read-write | current | VPLS Mesh Peer Node Id. |
| 1.3.6.1.4.1.6296.101.16.55.3.2.8 | ScalarsleMplsVplsMeshControlTunnelId | read-write | current | VPLS Mesh Peer Tunnel-id. |
| 1.3.6.1.4.1.6296.101.16.55.3.2.9 | ScalarsleMplsVplsMeshControlOwner | read-write | current | VPLS Mesh Peer Tunnel-Name. |
| 1.3.6.1.4.1.6296.101.16.55.3.2.10 | ScalarsleMplsVplsMeshControlTunnelPath | read-write | current | VPLS Mesh Peer Tunnel-Path. |
| 1.3.6.1.4.1.6296.101.16.55.3.2.11 | ScalarsleMplsVplsMeshControlInLabel | read-write | current | VPLS Mesh Peer Fib entry In-label. |
| 1.3.6.1.4.1.6296.101.16.55.3.2.12 | ScalarsleMplsVplsMeshControlOutLabel | read-write | current | VPLS Mesh Peer Fib entry Out-label. |
| 1.3.6.1.4.1.6296.101.16.55.3.2.13 | ScalarsleMplsVplsMeshControlOutInterface | read-write | current | VPLS Mesh Peer Fib entry Out-Interface. |
| 1.3.6.1.4.1.6296.101.16.55.3.2.14 | ScalarsleMplsVplsMeshControlQosServicePolicy | read-write | current | VPLS Mesh Peer qos input service policy. |
| 1.3.6.1.4.1.6296.101.16.55.4 | NodesleMplsVplsSpokeTable | |||
| 1.3.6.1.4.1.6296.101.16.55.4.1 | TablesleMplsVplsSpokeInfoTable | not-accessible | current | This table specifies information for VPLS Spoke vc. |
| 1.3.6.1.4.1.6296.101.16.55.4.1.1 | RowsleMplsVplsSpokeInfoEntry | not-accessible | current | A row in this table is indexed by sleMplsVplsInfoId and sleMplsVplsSpokeInfoVcName. |
| 1.3.6.1.4.1.6296.101.16.55.4.1.1.1 | ColumnsleMplsVplsSpokeInfoVcName | read-only | current | VPLS Spoke VC Name. |
| 1.3.6.1.4.1.6296.101.16.55.4.1.1.2 | ColumnsleMplsVplsSpokeInfoServiceType | read-only | current | VPLS Spoke Service Type. |
| 1.3.6.1.4.1.6296.101.16.55.4.1.1.3 | ColumnsleMplsVplsSpokeInfoInLabel | read-only | current | VPLS Spoke Fib In label. |
| 1.3.6.1.4.1.6296.101.16.55.4.1.1.4 | ColumnsleMplsVplsSpokeInfoOutLabel | read-only | current | VPLS Spoke Fib Out label. |
| 1.3.6.1.4.1.6296.101.16.55.4.1.1.5 | ColumnsleMplsVplsSpokeInfoOutInterface | read-only | current | VPLS Spoke Fib Out Interface. |
| 1.3.6.1.4.1.6296.101.16.55.4.1.1.6 | ColumnsleMplsVplsSpokeInfoState | read-only | current | VPLS Spoke Admin status. |
| 1.3.6.1.4.1.6296.101.16.55.4.2 | NodesleMplsVplsSpokeControl | |||
| 1.3.6.1.4.1.6296.101.16.55.4.2.1 | ScalarsleMplsVplsSpokeControlRequest | read-write | current | This object holds the possible read-write columns that can be modified in the sleMplsVplsSpoke table. For each read-write column of sleMplsVplsSpoke table, a S… |
| 1.3.6.1.4.1.6296.101.16.55.4.2.2 | ScalarsleMplsVplsSpokeControlStatus | read-only | current | This object displays the status of the configuration done. |
| 1.3.6.1.4.1.6296.101.16.55.4.2.3 | ScalarsleMplsVplsSpokeControlTimer | read-write | current | This object is based on the SLE style where a timer is configured for every control table. |
| 1.3.6.1.4.1.6296.101.16.55.4.2.4 | ScalarsleMplsVplsSpokeControlTimestamp | read-only | current | This object specifies the time at which the configuration is done. |
| 1.3.6.1.4.1.6296.101.16.55.4.2.5 | ScalarsleMplsVplsSpokeControlReqResult | read-only | current | The standard result of the SET operation is stored here. |
| 1.3.6.1.4.1.6296.101.16.55.4.2.6 | ScalarsleMplsVplsSpokeControlVplsId | read-write | current | VPLS Name which this peer should configure. |
| 1.3.6.1.4.1.6296.101.16.55.4.2.7 | ScalarsleMplsVplsSpokeControlVcName | read-write | current | VPLS Spoke VC Name. |
| 1.3.6.1.4.1.6296.101.16.55.4.2.8 | ScalarsleMplsVplsSpokeControlServiceType | read-write | current | VPLS Spoke Service Type. |
| 1.3.6.1.4.1.6296.101.16.55.4.2.9 | ScalarsleMplsVplsSpokeControlInLabel | read-write | current | VPLS Spoke Fib In label. |
| 1.3.6.1.4.1.6296.101.16.55.4.2.10 | ScalarsleMplsVplsSpokeControlOutLabel | read-write | current | VPLS Spoke Fib Out label. |
| 1.3.6.1.4.1.6296.101.16.55.4.2.11 | ScalarsleMplsVplsSpokeControlOutInterface | read-write | current | VPLS Spoke Fib Out Interface. |
| 1.3.6.1.4.1.6296.101.16.55.5 | NodesleMplsVplsMacLearningTable | |||
| 1.3.6.1.4.1.6296.101.16.55.5.1 | TablesleMplsVplsMacLearningInfoTable | not-accessible | current | This table specifies information for VPLS Mac learned. |
| 1.3.6.1.4.1.6296.101.16.55.5.1.1 | RowsleMplsVplsMacLearningInfoEntry | not-accessible | current | A row in this table is indexed by sleMplsVplsInfoId and sleMplsVplsMacLearningInfoMacAddress. |
| 1.3.6.1.4.1.6296.101.16.55.5.1.1.1 | ColumnsleMplsVplsMacLearningInfoMacAddress | not-accessible | current | Mac learned of VPLS service. |
| 1.3.6.1.4.1.6296.101.16.55.5.1.1.2 | ColumnsleMplsVplsMacLearningInfoInterfacIndex | read-only | current | Interface index of the MAC Learned. |
| 1.3.6.1.4.1.6296.101.16.55.5.1.1.3 | ColumnsleMplsVplsMacLearningInfoMeshAddress | read-only | current | Mac Learned Mesh address. |
| 1.3.6.1.4.1.6296.101.16.55.5.2 | NodesleMplsVplsMacLearningControl | |||
| 1.3.6.1.4.1.6296.101.16.55.5.2.1 | ScalarsleMplsVplsMacLearningControlRequest | read-write | current | This object holds the possible read-write columns that can be modified in the sleMplsVplsMacLearning table. For each read-write column of sleMplsVplsMacLearnin… |
| 1.3.6.1.4.1.6296.101.16.55.5.2.2 | ScalarsleMplsVplsMacLearningControlStatus | read-only | current | This object displays the status of the configuration done. |
| 1.3.6.1.4.1.6296.101.16.55.5.2.3 | ScalarsleMplsVplsMacLearningControlTimer | read-write | current | This object is based on the SLE style where a timer is configured for every control table. |
| 1.3.6.1.4.1.6296.101.16.55.5.2.4 | ScalarsleMplsVplsMacLearningControlTimestamp | read-only | current | This object specifies the time at which the configuration is done. |
| 1.3.6.1.4.1.6296.101.16.55.5.2.5 | ScalarsleMplsVplsMacLearningControlReqResult | read-only | current | The standard result of the SET operation is stored here. |
| 1.3.6.1.4.1.6296.101.16.55.5.2.6 | ScalarsleMplsVplsMacLearningControlVplsId | read-write | current | VPLS Name which this peer should configure. |
| 1.3.6.1.4.1.6296.101.16.55.6 | NodesleMplsVplsStatisticsTable | |||
| 1.3.6.1.4.1.6296.101.16.55.6.1 | NodesleMplsVplsAcStatistics | |||
| 1.3.6.1.4.1.6296.101.16.55.6.1.1 | TablesleMplsVplsAcStatisticsInfoTable | not-accessible | current | This table specifies information for VPLS attachement circuit statistics. |
| 1.3.6.1.4.1.6296.101.16.55.6.1.1.1 | RowsleMplsVplsAcStatisticsInfoEntry | not-accessible | current | A row in this table contains stats info of a VPLS instance and bound interface. |
| 1.3.6.1.4.1.6296.101.16.55.6.1.1.1.1 | ColumnsleMplsVplsAcStatisticsInfoTxPackets | read-only | current | Tx packet count. |
| 1.3.6.1.4.1.6296.101.16.55.6.1.1.1.2 | ColumnsleMplsVplsAcStatisticsInfoTxBytes | read-only | current | Tx bytes count. |
| 1.3.6.1.4.1.6296.101.16.55.6.1.1.1.3 | ColumnsleMplsVplsAcStatisticsInfoRxPackets | read-only | current | Rx packet count. |
| 1.3.6.1.4.1.6296.101.16.55.6.1.1.1.4 | ColumnsleMplsVplsAcStatisticsInfoRxBytes | read-only | current | Rx byte count. |
| 1.3.6.1.4.1.6296.101.16.55.6.1.1.1.5 | ColumnsleMplsVplsAcStatisticsInfoVlanId | read-only | current | This object is used to display the vlan id. |
| 1.3.6.1.4.1.6296.101.16.55.6.2 | NodesleMplsVplsPeerStatistics | |||
| 1.3.6.1.4.1.6296.101.16.55.6.2.1 | TablesleMplsVplsPeerStatisticsInfoTable | not-accessible | current | This table specifies information for VPLS Peer statistics. |
| 1.3.6.1.4.1.6296.101.16.55.6.2.1.1 | RowsleMplsVplsPeerStatisticsInfoEntry | not-accessible | current | A row in this table is contains the managed object for VPLS peer (Peer) stats. |
| 1.3.6.1.4.1.6296.101.16.55.6.2.1.1.1 | ColumnsleMplsVplsPeerStatisticsInfoTxPackets | read-only | current | Tx packet count. |
| 1.3.6.1.4.1.6296.101.16.55.6.2.1.1.2 | ColumnsleMplsVplsPeerStatisticsInfoTxBytes | read-only | current | Tx bytes count. |
| 1.3.6.1.4.1.6296.101.16.55.6.2.1.1.3 | ColumnsleMplsVplsPeerStatisticsInfoRxPackets | read-only | current | Rx packet count. |
| 1.3.6.1.4.1.6296.101.16.55.6.2.1.1.4 | ColumnsleMplsVplsPeerStatisticsInfoRxBytes | read-only | current | Rx byte count. |
| 1.3.6.1.4.1.6296.101.16.55.6.2.1.1.5 | ColumnsleMplsVplsPeerStatisticsInfoName | read-only | current | This object is used to display vpls name of the stats. |
| 1.3.6.1.4.1.6296.101.16.55.6.3 | NodesleMplsVplsStatisticsControl | |||
| 1.3.6.1.4.1.6296.101.16.55.6.3.1 | ScalarsleMplsVplsStatisticsControlRequest | read-write | current | This object holds the possible read-write columns that can be modified in the sleMplsVplsStatistics table. For each read-write column of sleMplsVplsStatistics … |
| 1.3.6.1.4.1.6296.101.16.55.6.3.2 | ScalarsleMplsVplsStatisticsControlStatus | read-only | current | This object displays the status of the configuration done. |
| 1.3.6.1.4.1.6296.101.16.55.6.3.3 | ScalarsleMplsVplsStatisticsControlTimer | read-write | current | This object is based on the SLE style where a timer is configured for every control table. |
| 1.3.6.1.4.1.6296.101.16.55.6.3.4 | ScalarsleMplsVplsStatisticsControlTimestamp | read-only | current | This object specifies the time at which the configuration is done. |
| 1.3.6.1.4.1.6296.101.16.55.6.3.5 | ScalarsleMplsVplsStatisticsControlReqResult | read-only | current | The standard result of the SET operation is stored here. |
| 1.3.6.1.4.1.6296.101.16.55.6.3.6 | ScalarsleMplsVplsStatisticsControlVplsId | read-write | current | VPLS Name which this peer should configure. |