SLE-NETWORK-MIB
459 objects
This MIB contains all needed informations about DHCP and all supported sle DHCP features.
Imported Objects
| DASAN-SMI | sleMgmt |
| IANAifType-MIB | IANAtunnelType |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SLE-TC-MIB | SleControlRequestResultType SleControlStatusType |
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | BITS Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6296.101.11 | IdentitysleNetwork | This MIB contains all needed informations about DHCP and all supported sle DHCP features. | ||
| 1.3.6.1.4.1.6296.101.11.1 | NodesleNetInterface | |||
| 1.3.6.1.4.1.6296.101.11.1.1 | TablesleNetIfTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.1.1.1 | RowsleNetIfEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.1.1.1.1 | ColumnsleNetIfIndex | read-only | current | Network interface index 0 : any(all) 1..4094 : VLAN 4095 : management 4096 : loopback 4097 : NULL device 10000..11023: Tunnel interface index |
| 1.3.6.1.4.1.6296.101.11.1.1.1.2 | ColumnsleNetIfName | read-only | current | Device Name of this Interface. |
| 1.3.6.1.4.1.6296.101.11.1.1.1.3 | ColumnsleNetIfDescription | read-only | current | Description of this interface. |
| 1.3.6.1.4.1.6296.101.11.1.1.1.4 | ColumnsleNetIfTableIndex | read-only | current | Same as ifIndex (for appropriated ifTable entries). |
| 1.3.6.1.4.1.6296.101.11.1.1.1.5 | ColumnsleNetIfRegState | read-only | current | Registered state of Network device. |
| 1.3.6.1.4.1.6296.101.11.1.1.1.6 | ColumnsleNetIfAdminState | read-only | current | Administrative state. down - shutdown up - noshutdown |
| 1.3.6.1.4.1.6296.101.11.1.1.1.7 | ColumnsleNetIfOperState | read-only | current | Operational state. down - shutdown or not running up - running |
| 1.3.6.1.4.1.6296.101.11.1.1.1.8 | ColumnsleNetIfMulticast | read-only | current | Multicast enable/disable state. |
| 1.3.6.1.4.1.6296.101.11.1.1.1.9 | ColumnsleNetIfMtu | read-only | current | Maximum Transmission Unit. |
| 1.3.6.1.4.1.6296.101.11.1.1.1.10 | ColumnsleNetIfIpSetMode | read-only | current | IP address setting mode. 0 : static 1 : dynamic (by DHCP client) |
| 1.3.6.1.4.1.6296.101.11.1.1.1.11 | ColumnsleNetIfIpMartianFilter | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.11.1.1.1.12 | ColumnsleNetIfUpCnt | read-only | current | The times of link-up event. |
| 1.3.6.1.4.1.6296.101.11.1.1.1.13 | ColumnsleNetIfDownCnt | read-only | current | The times of link-down event. |
| 1.3.6.1.4.1.6296.101.11.1.1.1.14 | ColumnsleNetIfLinkUpTime | read-only | current | The elapsed time after link is up. |
| 1.3.6.1.4.1.6296.101.11.1.1.1.15 | ColumnsleNetIfElapsedTimeAfterClearStats | read-only | current | The elapsed time after clearing status. |
| 1.3.6.1.4.1.6296.101.11.1.1.1.16 | ColumnsleNetIfBindingVRFName | read-only | current | VRF name that this tunnel interface is binding. |
| 1.3.6.1.4.1.6296.101.11.1.1.1.17 | ColumnsleNetIfOnFailUseVRF | read-only | current | Lookup into a global routing table when the VRF routing table lookup was failed. |
| 1.3.6.1.4.1.6296.101.11.1.1.1.18 | ColumnsleNetIfIpUnreachability | read-only | current | IP unreachability ON/OFF |
| 1.3.6.1.4.1.6296.101.11.1.1.1.19 | ColumnsleNetIfipRedirects | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.11.1.1.1.20 | ColumnsleNetIfIpForwarding | read-only | current | The IP forwarding status |
| 1.3.6.1.4.1.6296.101.11.1.1.1.21 | ColumnsleNetIfAlias | read-only | current | lias Name for the Interface |
| 1.3.6.1.4.1.6296.101.11.1.1.1.22 | ColumnsleNetIfIpArpAlias | read-only | current | IP Arp Alias state |
| 1.3.6.1.4.1.6296.101.11.1.1.1.23 | ColumnsleNetIfIpArpAliasMac | read-only | current | IP Arp Alias MAC |
| 1.3.6.1.4.1.6296.101.11.1.1.1.24 | ColumnsleNetIfArpMCProbeCount | read-only | current | ARP request Multicast probe count |
| 1.3.6.1.4.1.6296.101.11.1.1.1.25 | ColumnsleNetIfArpUCProbeCount | read-only | current | ARP request Unicast probe count |
| 1.3.6.1.4.1.6296.101.11.1.1.1.26 | ColumnsleNetIfArpRetransTime | read-only | current | Retrans time of ARP request (unit: 1s) |
| 1.3.6.1.4.1.6296.101.11.1.1.1.27 | ColumnsleNetIfIpProxyArp | read-only | current | IP Proxy Arp state |
| 1.3.6.1.4.1.6296.101.11.1.1.1.28 | ColumnsleNetIfIpRPFilter | read-only | current | IP Reverse Path Filtering of CPU |
| 1.3.6.1.4.1.6296.101.11.1.1.1.29 | ColumnsleNetIfRPFilter | read-only | current | Reverse Path Filtering of CHIP (default : looseAllow) |
| 1.3.6.1.4.1.6296.101.11.1.1.1.30 | ColumnsleNetIfRouteMap | read-only | current | IP Policy route-map name |
| 1.3.6.1.4.1.6296.101.11.1.2 | NodesleNetIfControl | |||
| 1.3.6.1.4.1.6296.101.11.1.2.1 | ScalarsleNetIfControlRequest | read-write | current | The request of a user command. |
| 1.3.6.1.4.1.6296.101.11.1.2.2 | ScalarsleNetIfControlStatus | read-only | current | The status of a user command. |
| 1.3.6.1.4.1.6296.101.11.1.2.3 | ScalarsleNetIfControlTimer | read-write | current | The maximum wait time for the manager for a long running user command. |
| 1.3.6.1.4.1.6296.101.11.1.2.4 | ScalarsleNetIfControlTimeStamp | read-only | current | The time stamp of the last command (end of command). |
| 1.3.6.1.4.1.6296.101.11.1.2.5 | ScalarsleNetIfControlReqResult | read-only | current | The result of the last user command. |
| 1.3.6.1.4.1.6296.101.11.1.2.6 | ScalarsleNetIfControlIndex | read-write | current | Network interface index 0 : any(all) 1..4094 : VLAN 4095 : management 4096 : loopback 4097 : NULL device 10000..11023: Tunnel interface index |
| 1.3.6.1.4.1.6296.101.11.1.2.7 | ScalarsleNetIfControlDescription | read-write | current | Description of this interface. |
| 1.3.6.1.4.1.6296.101.11.1.2.8 | ScalarsleNetIfControlRegState | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.11.1.2.9 | ScalarsleNetIfControlAdminState | read-write | current | Administrative state. |
| 1.3.6.1.4.1.6296.101.11.1.2.10 | ScalarsleNetIfControlMulticast | read-write | current | Multicast enable/disable state. |
| 1.3.6.1.4.1.6296.101.11.1.2.11 | ScalarsleNetIfControlMtu | read-write | current | Maximum Transmission Unit. |
| 1.3.6.1.4.1.6296.101.11.1.2.12 | ScalarsleNetIfControlIpMartianFilter | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.11.1.2.13 | ScalarsleNetIfControlBindingVRFName | read-write | current | VRF name that this tunnel interface is binding. |
| 1.3.6.1.4.1.6296.101.11.1.2.14 | ScalarsleNetIfControlOnFailUseVRF | read-write | current | Lookup into a global routing table when the VRF routing table lookup was failed. |
| 1.3.6.1.4.1.6296.101.11.1.2.15 | ScalarsleNetIfControlIpUnreachability | read-write | current | IP unreachability ON/OFF |
| 1.3.6.1.4.1.6296.101.11.1.2.16 | ScalarsleNetIfControlIpRedirects | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.11.1.2.17 | ScalarsleNetIfControlIpForwarding | read-write | current | The IP forwarding status |
| 1.3.6.1.4.1.6296.101.11.1.2.18 | ScalarsleNetIfControlAlias | read-write | current | Alias Name for the Interface |
| 1.3.6.1.4.1.6296.101.11.1.2.19 | ScalarsleNetIfControlIpArpAlias | read-write | current | IP Arp Alias state |
| 1.3.6.1.4.1.6296.101.11.1.2.20 | ScalarsleNetIfControlIpArpAliasMac | read-write | current | IP Arp Alias MAC |
| 1.3.6.1.4.1.6296.101.11.1.2.21 | ScalarsleNetIfControlArpMCProbeCount | read-write | current | ARP request Multicast probe count |
| 1.3.6.1.4.1.6296.101.11.1.2.22 | ScalarsleNetIfControlArpUCProbeCount | read-write | current | ARP request Unicast probe count |
| 1.3.6.1.4.1.6296.101.11.1.2.23 | ScalarsleNetIfControlArpRetransTime | read-write | current | Retrans time of ARP request (unit: 1s) |
| 1.3.6.1.4.1.6296.101.11.1.2.24 | ScalarsleNetIfControlIpProxyArp | read-write | current | IP Proxy Arp state |
| 1.3.6.1.4.1.6296.101.11.1.2.25 | ScalarsleNetIfControlIpRPFilter | read-write | current | IP Reverse Path Filtering of CPU |
| 1.3.6.1.4.1.6296.101.11.1.2.26 | ScalarsleNetIfControlRPFilter | read-write | current | Reverse Path Filtering of CHIP (default : looseAllow) |
| 1.3.6.1.4.1.6296.101.11.1.2.27 | ScalarsleNetIfControlRouteMap | read-write | current | IP Policy route-map name |
| 1.3.6.1.4.1.6296.101.11.1.3 | NodesleNetIfNotification | |||
| 1.3.6.1.4.1.6296.101.11.1.3.1 | NotificationsleNetIfRegStateChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.1.3.2 | NotificationsleNetIfProfileChanged | current | setNetIfProfile. | |
| 1.3.6.1.4.1.6296.101.11.1.3.3 | NotificationsleNetIfIpMartianFilterChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.1.3.4 | NotificationsleNetIfBindingVRFSet | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.1.3.5 | NotificationsleNetIfBindingVRFUnset | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.1.3.6 | NotificationsleNetIfIpOnFailUseVRFChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.1.3.7 | NotificationsleNetIfIpUnreachabilityChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.1.3.8 | NotificationsleNetIfIpRedirectsChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.1.3.9 | NotificationsleNetIfIpForwardingChanged | current | setNetIfIpForwarding | |
| 1.3.6.1.4.1.6296.101.11.1.3.10 | NotificationsleNetIfAliasChanged | current | setAlias | |
| 1.3.6.1.4.1.6296.101.11.1.3.11 | NotificationsleNetIfIpArpAliasChanged | current | setIpArpAlias | |
| 1.3.6.1.4.1.6296.101.11.1.3.12 | NotificationsleNetIfArpMCProbeCountChanged | current | setArpMCProbeCount | |
| 1.3.6.1.4.1.6296.101.11.1.3.13 | NotificationsleNetIfArpUCProbeCountChanged | current | setArpUCProbeCount | |
| 1.3.6.1.4.1.6296.101.11.1.3.14 | NotificationsleNetIfArpRetransTimeChanged | current | setArpRetransTime | |
| 1.3.6.1.4.1.6296.101.11.1.3.15 | NotificationsleNetIfIpProxyArpChanged | current | setIpProxyArp | |
| 1.3.6.1.4.1.6296.101.11.1.3.16 | NotificationsleNetIfIpRPFilterChanged | current | setIpRPFilter | |
| 1.3.6.1.4.1.6296.101.11.1.3.17 | NotificationsleNetIfRPFilterChanged | current | setRPFilter | |
| 1.3.6.1.4.1.6296.101.11.1.3.18 | NotificationsleNetIfRouteMapChanged | current | setRouteMap | |
| 1.3.6.1.4.1.6296.101.11.2 | NodesleIpAddress | |||
| 1.3.6.1.4.1.6296.101.11.2.1 | TablesleIpAddrTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.2.1.1 | RowsleIpAddrEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.2.1.1.1 | ColumnsleIpAddrValue | read-only | current | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.6296.101.11.2.1.1.2 | ColumnsleIpAddrMask | read-only | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.6296.101.11.2.1.1.3 | ColumnsleIpAddrBcast | read-only | current | The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this… |
| 1.3.6.1.4.1.6296.101.11.2.1.1.4 | ColumnsleIpAddrFlag | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.11.2.1.1.5 | ColumnsleIpAddrScope | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.11.2.1.1.6 | ColumnsleIpAddrIpIndex | read-only | current | The Ip index for Interface Unnumbered feature enhanced. If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip add… |
| 1.3.6.1.4.1.6296.101.11.2.1.1.7 | ColumnsleIpAddrUnnumUsedIp | read-only | current | The Check a specific IP address for using interface unnumbered feature. |
| 1.3.6.1.4.1.6296.101.11.2.2 | NodesleIpAddrControl | |||
| 1.3.6.1.4.1.6296.101.11.2.2.1 | ScalarsleIpAddrControlRequest | read-write | current | The request of a user command. |
| 1.3.6.1.4.1.6296.101.11.2.2.2 | ScalarsleIpAddrControlStatus | read-only | current | The status of a user command. |
| 1.3.6.1.4.1.6296.101.11.2.2.3 | ScalarsleIpAddrControlTimer | read-write | current | The maximum wait time for the manager for a long running user command. |
| 1.3.6.1.4.1.6296.101.11.2.2.4 | ScalarsleIpAddrControlTimeStamp | read-only | current | The time stamp of the last command (end of command). |
| 1.3.6.1.4.1.6296.101.11.2.2.5 | ScalarsleIpAddrControlReqResult | read-only | current | The result of the last user command. |
| 1.3.6.1.4.1.6296.101.11.2.2.6 | ScalarsleIpAddrControlNetIfIndex | read-write | current | Network interface index 1..4094 : VLAN 10000..11023: Tunnel interface index |
| 1.3.6.1.4.1.6296.101.11.2.2.7 | ScalarsleIpAddrControlValue | read-write | current | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.6296.101.11.2.2.8 | ScalarsleIpAddrControlMask | read-write | current | The subnet mask associated with the IP address of this entry. |
| 1.3.6.1.4.1.6296.101.11.2.2.9 | ScalarsleIpAddrControlFlag | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.11.2.2.10 | ScalarsleIpAddrControlScope | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.11.2.2.11 | ScalarsleIpAddrControlIpIndex | read-write | current | The Ip index for Interface Unnumbered feature enhanced. If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip add… |
| 1.3.6.1.4.1.6296.101.11.2.3 | NodesleIpAddrNotification | |||
| 1.3.6.1.4.1.6296.101.11.2.3.1 | NotificationsleIpAddressCreated | current | createIpAddress. | |
| 1.3.6.1.4.1.6296.101.11.2.3.2 | NotificationsleIpAddressDestroyed | current | destroyIpAddress. | |
| 1.3.6.1.4.1.6296.101.11.2.3.3 | NotificationsleIpAddressIpIndexAdded | current | addIpIndex | |
| 1.3.6.1.4.1.6296.101.11.2.3.4 | NotificationsleIpAddressIpIndexDeleted | current | delIpIndex | |
| 1.3.6.1.4.1.6296.101.11.3 | NodesleArp | |||
| 1.3.6.1.4.1.6296.101.11.3.1 | TablesleArpTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.3.1.1 | RowsleArpEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.3.1.1.1 | ColumnsleArpIpAddress | read-only | current | The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address. |
| 1.3.6.1.4.1.6296.101.11.3.1.1.2 | ColumnsleArpPhyAddress | read-only | current | The media-dependent `physical' address. |
| 1.3.6.1.4.1.6296.101.11.3.1.1.3 | ColumnsleArpPortIndex | read-only | current | The interface on which this entry's equivalence is effective. 0: for any ports. |
| 1.3.6.1.4.1.6296.101.11.3.1.1.4 | ColumnsleArpState | read-only | current | Arp entry's currently status. |
| 1.3.6.1.4.1.6296.101.11.3.1.1.5 | ColumnsleArpHwType | read-only | current | Hardware Type of media. |
| 1.3.6.1.4.1.6296.101.11.3.1.1.6 | ColumnsleArpHwUsed | read-only | current | Arp entry's currently chip usage state. |
| 1.3.6.1.4.1.6296.101.11.3.1.1.7 | ColumnsleArpUsedTime | read-only | current | Arp entry's chip used time.(if sleArpState is 0, always 0 and if sleArpHwUsed is 0, always 0.) |
| 1.3.6.1.4.1.6296.101.11.3.2 | NodesleArpControl | |||
| 1.3.6.1.4.1.6296.101.11.3.2.1 | ScalarsleArpControlRequest | read-write | current | The request of a user command. |
| 1.3.6.1.4.1.6296.101.11.3.2.2 | ScalarsleArpControlStatus | read-only | current | The status of a user command. |
| 1.3.6.1.4.1.6296.101.11.3.2.3 | ScalarsleArpControlTimer | read-write | current | The maximum wait time for the manager for a long running user command. |
| 1.3.6.1.4.1.6296.101.11.3.2.4 | ScalarsleArpControlTimeStamp | read-only | current | The time stamp of the last command (end of command). |
| 1.3.6.1.4.1.6296.101.11.3.2.5 | ScalarsleArpControlReqResult | read-only | current | The result of the last user command. |
| 1.3.6.1.4.1.6296.101.11.3.2.6 | ScalarsleArpControlNetIfIndex | read-write | current | Network interface index. |
| 1.3.6.1.4.1.6296.101.11.3.2.7 | ScalarsleArpControlIpAddress | read-write | current | The NetworkAddress (e.g., the IP address) corresponding to the media-dependent `physical' address. |
| 1.3.6.1.4.1.6296.101.11.3.2.8 | ScalarsleArpControlPhyAddress | read-write | current | The media-dependent `physical' address. |
| 1.3.6.1.4.1.6296.101.11.3.2.9 | ScalarsleArpControlState | read-write | current | Arp entry's currently status. |
| 1.3.6.1.4.1.6296.101.11.3.2.10 | ScalarsleArpControlMask | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.11.3.3 | NodesleArpNotification | |||
| 1.3.6.1.4.1.6296.101.11.3.3.1 | NotificationsleArpEntryCreated | current | createArpEntry. | |
| 1.3.6.1.4.1.6296.101.11.3.3.2 | NotificationsleArpEntryDestroyed | current | destroyArpEntry. | |
| 1.3.6.1.4.1.6296.101.11.3.3.3 | NotificationsleArpTableCleared | current | clearArpTable. In this notification PDU, key of sleArpState is ifindex.0.0.0.0. | |
| 1.3.6.1.4.1.6296.101.11.3.3.4 | NotificationsleArpTableClearedByAddr | current | clearArpTableByAddr | |
| 1.3.6.1.4.1.6296.101.11.4 | NodesleRoute | |||
| 1.3.6.1.4.1.6296.101.11.4.1 | TablesleRouteTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.4.1.1 | RowsleRouteEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.4.1.1.1 | ColumnsleRouteDstAddress | read-only | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.6296.101.11.4.1.1.2 | ColumnsleRouteDstMask | read-only | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the sleRouteDstAddress field. For those systems that d… |
| 1.3.6.1.4.1.6296.101.11.4.1.1.3 | ColumnsleRouteGateway | read-only | current | The Gateway IP Address. 0.0.0.0/0 : indicate default gateway or invalid |
| 1.3.6.1.4.1.6296.101.11.4.1.1.4 | ColumnsleRouteInterface | read-only | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.6296.101.11.4.1.1.5 | ColumnsleRouteType | read-write | current | The type of route. Note that the values direct and indirect refer to the notion of direct and indirect routing in the IP architecture. Setting this object to t… |
| 1.3.6.1.4.1.6296.101.11.4.1.1.6 | ColumnsleRouteProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.6296.101.11.4.1.1.7 | ColumnsleRouteMetric | read-write | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's sleRouteProto value. If… |
| 1.3.6.1.4.1.6296.101.11.4.1.1.8 | ColumnsleRouteActive | read-write | current | The active status for this routing entry. |
| 1.3.6.1.4.1.6296.101.11.4.1.1.9 | ColumnsleRouteBindingSrcAddr | read-only | current | The binding source IP Address for this route. |
| 1.3.6.1.4.1.6296.101.11.4.1.1.10 | ColumnsleRouteDistance | read-write | current | The Distance value for this route. |
| 1.3.6.1.4.1.6296.101.11.4.1.1.11 | ColumnsleRouteSubtype | read-only | current | The subtype of this route. |
| 1.3.6.1.4.1.6296.101.11.4.1.1.12 | ColumnsleRouteNexthopStatus | read-only | current | The nexthop status of this route. |
| 1.3.6.1.4.1.6296.101.11.4.1.1.13 | ColumnsleRouteRibStatus | read-only | current | The rib status for this route. |
| 1.3.6.1.4.1.6296.101.11.4.1.1.14 | ColumnsleRouteVRFIndex | read-only | current | VRF index in sleIpVRFTable. |
| 1.3.6.1.4.1.6296.101.11.4.2 | NodesleRouteControl | |||
| 1.3.6.1.4.1.6296.101.11.4.2.1 | ScalarsleRouteControlRequest | read-write | current | The request of a user command. |
| 1.3.6.1.4.1.6296.101.11.4.2.2 | ScalarsleRouteControlStatus | read-only | current | The status of a user command. |
| 1.3.6.1.4.1.6296.101.11.4.2.3 | ScalarsleRouteControlTimer | read-write | current | The maximum wait time for the manager for a long running user command. |
| 1.3.6.1.4.1.6296.101.11.4.2.4 | ScalarsleRouteControlTimeStamp | read-only | current | The result of the last user command. |
| 1.3.6.1.4.1.6296.101.11.4.2.5 | ScalarsleRouteControlReqResult | read-only | current | The time stamp of the last command (end of command). |
| 1.3.6.1.4.1.6296.101.11.4.2.6 | ScalarsleRouteControlDstAddress | read-write | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.6296.101.11.4.2.7 | ScalarsleRouteControlDstMask | read-write | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the sleRouteDstAddress field. For those systems that d… |
| 1.3.6.1.4.1.6296.101.11.4.2.8 | ScalarsleRouteControlGateway | read-write | current | The Gateway IP Address. 0.0.0.0/0 : indicate default gateway or invalid |
| 1.3.6.1.4.1.6296.101.11.4.2.9 | ScalarsleRouteControlInterface | read-write | current | Network interface index 0: invalid 1..4094: VLAN 4095: management 4096: loopback 4097: NULL device 10000..11023: Tunnel interface index To config interface, sl… |
| 1.3.6.1.4.1.6296.101.11.4.2.10 | ScalarsleRouteControlBindingSrcAddr | read-write | current | The binding source IP Address for this route. |
| 1.3.6.1.4.1.6296.101.11.4.2.11 | ScalarsleRouteControlDistance | read-write | current | The Distance value for this route. |
| 1.3.6.1.4.1.6296.101.11.4.2.12 | ScalarsleRouteControlVRFIndex | read-write | current | VRF index in sleIpVRFTable. |
| 1.3.6.1.4.1.6296.101.11.4.3 | NodesleRouteNotification | |||
| 1.3.6.1.4.1.6296.101.11.4.3.1 | NotificationsleRouteStaticCreated | current | createStaticRoute | |
| 1.3.6.1.4.1.6296.101.11.4.3.2 | NotificationsleRouteStaticDestroyed | current | destroyStaticRoute | |
| 1.3.6.1.4.1.6296.101.11.4.3.3 | NotificationsleRouteStaticProfileChanged | current | setStaticRouteProfile | |
| 1.3.6.1.4.1.6296.101.11.5 | NodesleDhcpClient | |||
| 1.3.6.1.4.1.6296.101.11.5.1 | TablesleDhcpClTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.5.1.1 | RowsleDhcpClEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.5.1.1.1 | ColumnsleDhcpClMode | read-only | current | DHCP Client activity state in this interface. |
| 1.3.6.1.4.1.6296.101.11.5.1.1.2 | ColumnsleDhcpClIpAddr | read-only | current | The IP address acquired by DHCP Client active in this interface. |
| 1.3.6.1.4.1.6296.101.11.5.1.1.3 | ColumnsleDhcpClNetmask | read-only | current | The subnet mask associated with the IP address acquired by DHCP Client. The value of the mask is an IP address with all the network bits set to 1 and all the h… |
| 1.3.6.1.4.1.6296.101.11.5.1.1.4 | ColumnsleDhcpClGateway | read-only | current | The Gateway's IP address acquired by DHCP Client active in this interface. |
| 1.3.6.1.4.1.6296.101.11.5.1.1.5 | ColumnsleDhcpClDnsServer | read-only | current | The DNS server's IP address acquired by DHCP Client active in this interface. |
| 1.3.6.1.4.1.6296.101.11.5.1.1.6 | ColumnsleDhcpClServer | read-only | current | DHCP Server's IP address. |
| 1.3.6.1.4.1.6296.101.11.5.1.1.7 | ColumnsleDhcpClClientId | read-only | current | DHCP Client-identifier value. This is used by DHCP clients to specify their unique identifier. DHCP servers use this value to index their database of address b… |
| 1.3.6.1.4.1.6296.101.11.5.1.1.8 | ColumnsleDhcpClClientIdStyle | read-only | current | DHCP Client-identifier input style. 0 : ascii string format 1 : hexadecimal format |
| 1.3.6.1.4.1.6296.101.11.5.1.1.9 | ColumnsleDhcpClClassId | read-only | current | DHCP Class identifier value. This is used by DHCP clients to optionally identify the vendor type and configuration of a DHCP client. The information is a strin… |
| 1.3.6.1.4.1.6296.101.11.5.1.1.10 | ColumnsleDhcpClClassIdStyle | read-only | current | DHCP Class identifier input style. 0 : ascii string format 1 : hexadecimal format |
| 1.3.6.1.4.1.6296.101.11.5.1.1.11 | ColumnsleDhcpClLeasetime | read-only | current | The leased time for IP address acquired by DHCP Client. Default lease-time: 3600s |
| 1.3.6.1.4.1.6296.101.11.5.1.1.12 | ColumnsleDhcpClState | read-only | current | The operating status of DHCP Client. |
| 1.3.6.1.4.1.6296.101.11.5.2 | NodesleDhcpClControl | |||
| 1.3.6.1.4.1.6296.101.11.5.2.1 | ScalarsleDhcpClControlRequest | read-write | current | The request of a user command. |
| 1.3.6.1.4.1.6296.101.11.5.2.2 | ScalarsleDhcpClControlStatus | read-only | current | The status of a user command. |
| 1.3.6.1.4.1.6296.101.11.5.2.3 | ScalarsleDhcpClControlTimer | read-write | current | The maximum wait time for the manager for a long running user command. |
| 1.3.6.1.4.1.6296.101.11.5.2.4 | ScalarsleDhcpClControlTimeStamp | read-only | current | The time stamp of the last command (end of command). |
| 1.3.6.1.4.1.6296.101.11.5.2.5 | ScalarsleDhcpClControlReqResult | read-only | current | The result of the last user command. |
| 1.3.6.1.4.1.6296.101.11.5.2.6 | ScalarsleDhcpClControlNetIfIndex | read-write | current | Network Interface Index. |
| 1.3.6.1.4.1.6296.101.11.5.2.7 | ScalarsleDhcpClControlMode | read-write | current | DHCP Client activity state in this interface. |
| 1.3.6.1.4.1.6296.101.11.5.2.8 | ScalarsleDhcpClControlClientId | read-write | current | DHCP Client-identifier value. This is used by DHCP clients to specify their unique identifier. DHCP servers use this value to index their database of address b… |
| 1.3.6.1.4.1.6296.101.11.5.2.9 | ScalarsleDhcpClControlClientIdStyle | read-write | current | DHCP Client-identifier input style. 0 : ascii string format 1 : hexadecimal format |
| 1.3.6.1.4.1.6296.101.11.5.2.10 | ScalarsleDhcpClControlClassId | read-write | current | DHCP Class identifier value. This is used by DHCP clients to optionally identify the vendor type and configuration of a DHCP client. The information is a strin… |
| 1.3.6.1.4.1.6296.101.11.5.2.11 | ScalarsleDhcpClControlClassIdStyle | read-write | current | DHCP Class identifier input style. 0 : ascii string format 1 : hexadecimal format |
| 1.3.6.1.4.1.6296.101.11.5.2.12 | ScalarsleDhcpClControlLeasetime | read-write | current | The leased time for IP address acquired by DHCP Client. Default lease-time: 3600s |
| 1.3.6.1.4.1.6296.101.11.5.2.13 | ScalarsleDhcpClControlUpdateIP | read-write | current | Update DHCP client operating status. 0 : default 1 : renew 2 : release |
| 1.3.6.1.4.1.6296.101.11.5.3 | NodesleDhcpClNotification | |||
| 1.3.6.1.4.1.6296.101.11.5.3.1 | NotificationsleDhcpClModeChanged | current | setDhcpClMode. | |
| 1.3.6.1.4.1.6296.101.11.5.3.2 | NotificationsleDhcpClProfileChanged | current | setDhcpClProfile. | |
| 1.3.6.1.4.1.6296.101.11.5.3.3 | NotificationsleDhcpClStateChanged | current | ChangeDhcpClState. | |
| 1.3.6.1.4.1.6296.101.11.6 | NodesleV2DhcpClient | |||
| 1.3.6.1.4.1.6296.101.11.7 | NodesleNetworkBase | |||
| 1.3.6.1.4.1.6296.101.11.7.1 | NodesleNetworkBaseInfo | |||
| 1.3.6.1.4.1.6296.101.11.7.1.1 | ScalarsleNetworkArpAgingTime | read-only | current | System Arp Aging Time |
| 1.3.6.1.4.1.6296.101.11.7.1.2 | ScalarsleNetworkBaseVrfDynamicForwardBinding | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.11.7.2 | NodesleNetworkBaseControl | |||
| 1.3.6.1.4.1.6296.101.11.7.2.1 | ScalarsleNetworkControlRequest | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.11.7.2.2 | ScalarsleNetworkControlStatus | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.11.7.2.3 | ScalarsleNetworkControlTimer | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.11.7.2.4 | ScalarsleNetworkControlTimeStamp | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.11.7.2.5 | ScalarsleNetworkControlReqResult | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.11.7.2.6 | ScalarsleNetworkControlArpAgingTime | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.11.7.2.7 | ScalarsleNetworkControlVrfDynamicForwardBinding | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.11.7.3 | NodesleNetworkBaseNotification | |||
| 1.3.6.1.4.1.6296.101.11.7.3.1 | NotificationsleNetworkArpProfileChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.8 | NodesleTunnel | |||
| 1.3.6.1.4.1.6296.101.11.8.1 | TablesleTunnelIfTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.8.1.1 | RowsleTunnelIfEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.8.1.1.1 | ColumnsleTunnelIfIndex | read-only | current | Tunnel interface index |
| 1.3.6.1.4.1.6296.101.11.8.1.1.2 | ColumnsleTunnelIfLocalAddress | read-only | current | The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header), or 0.0.0.0 if unknown. |
| 1.3.6.1.4.1.6296.101.11.8.1.1.3 | ColumnsleTunnelIfRemoteAddress | read-only | current | The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown. |
| 1.3.6.1.4.1.6296.101.11.8.1.1.4 | ColumnsleTunnelIfMode | read-only | current | The encapsulation method used by the tunnel. other(1) - none of the following direct(2) - intermediate header gre(3) - GRE encapsulation minimal(4) - Minimal e… |
| 1.3.6.1.4.1.6296.101.11.8.1.1.5 | ColumnsleTunnelIfTTL | read-only | current | The TTL to use in the outer IP header. |
| 1.3.6.1.4.1.6296.101.11.8.1.1.6 | ColumnsleTunnelIfDscpMode | read-only | current | The DiffServ field mode to use in the outer IP header. A value of dscpCopyFromPacket indicates that the bits are copied from the payload's header. A value of d… |
| 1.3.6.1.4.1.6296.101.11.8.1.1.7 | ColumnsleTunnelIfDscp | read-only | current | The static DiffServ field value to use in the outer IP header. |
| 1.3.6.1.4.1.6296.101.11.8.1.1.8 | ColumnsleTunnelIfKeepaliveInterval | read-only | current | Specifies the time interval, in seconds, at which keepalive packets are sent. (This object is available for a gre tunnel only.) |
| 1.3.6.1.4.1.6296.101.11.8.1.1.9 | ColumnsleTunnelIfKeepaliveRetry | read-only | current | Specifies the number times that the device will continue to send keepalive packets without response before bringing the tunnel interface protocol down. (This o… |
| 1.3.6.1.4.1.6296.101.11.8.1.1.10 | ColumnsleTunnelIfPathMtuDiscovery | read-only | current | Path mtu discovery on tunnel. |
| 1.3.6.1.4.1.6296.101.11.8.1.1.11 | ColumnsleTunnelIfVRFName | read-only | current | VPN Routing/Forwarding instance name. |
| 1.3.6.1.4.1.6296.101.11.8.1.1.12 | ColumnsleTunnelIfBindingPorts | read-only | current | Tunnel binding ports map. |
| 1.3.6.1.4.1.6296.101.11.8.1.1.13 | ColumnsleTunnelIfLocalAddress6 | read-only | current | The address of the local endpoint of the tunnel for IPv6 |
| 1.3.6.1.4.1.6296.101.11.8.1.1.14 | ColumnsleTunnelIfRemoteAddress6 | read-only | current | The address of the remote endpoint of the tunnel for IPv6 |
| 1.3.6.1.4.1.6296.101.11.8.1.1.15 | ColumnsleTunnelIfChecksum | read-only | current | A checksum feature for the tunnel. |
| 1.3.6.1.4.1.6296.101.11.8.1.1.16 | ColumnsleTunnelIfDmac | read-only | current | A destination MAC address for tunneled packets. (IP-in-IP tunneling on Broadcom.) |
| 1.3.6.1.4.1.6296.101.11.8.1.1.17 | ColumnsleTunnelIfTos | read-only | current | A value of Type of Service (TOS) in the tunnel IPv4 encapsulation header. |
| 1.3.6.1.4.1.6296.101.11.8.2 | NodesleTunnelIfControl | |||
| 1.3.6.1.4.1.6296.101.11.8.2.1 | ScalarsleTunnelIfControlRequest | read-write | current | The request of a user command. |
| 1.3.6.1.4.1.6296.101.11.8.2.2 | ScalarsleTunnelIfControlStatus | read-only | current | The status of a user command. |
| 1.3.6.1.4.1.6296.101.11.8.2.3 | ScalarsleTunnelIfControlTimer | read-write | current | The maximum wait time for the manager for a long running user command. |
| 1.3.6.1.4.1.6296.101.11.8.2.4 | ScalarsleTunnelIfControlTimeStamp | read-only | current | The result of the last user command. |
| 1.3.6.1.4.1.6296.101.11.8.2.5 | ScalarsleTunnelIfControlReqResult | read-only | current | The time stamp of the last command (end of command). |
| 1.3.6.1.4.1.6296.101.11.8.2.6 | ScalarsleTunnelIfControlIndex | read-write | current | Tunnel interface index |
| 1.3.6.1.4.1.6296.101.11.8.2.7 | ScalarsleTunnelIfControlLocalAddress | read-write | current | The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header), or 0.0.0.0 if unknown. |
| 1.3.6.1.4.1.6296.101.11.8.2.8 | ScalarsleTunnelIfControlRemoteAddress | read-write | current | The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header), or 0.0.0.0 if unknown. |
| 1.3.6.1.4.1.6296.101.11.8.2.9 | ScalarsleTunnelIfControlMode | read-write | current | The encapsulation method used by the tunnel. other(1) - none of the following direct(2) - intermediate header gre(3) - GRE encapsulation minimal(4) - Minimal e… |
| 1.3.6.1.4.1.6296.101.11.8.2.10 | ScalarsleTunnelIfControlTTL | read-write | current | The TTL to use in the outer IP header. |
| 1.3.6.1.4.1.6296.101.11.8.2.11 | ScalarsleTunneIflControlDscpMode | read-write | current | The DiffServ field mode to use in the outer IP header. A value of dscpCopyFromPacket indicates that the bits are copied from the payload's header. A value of d… |
| 1.3.6.1.4.1.6296.101.11.8.2.12 | ScalarsleTunneIflControlDscp | read-write | current | The static DiffServ field value to use in the outer IP header. |
| 1.3.6.1.4.1.6296.101.11.8.2.13 | ScalarsleTunnelIfControlKeepaliveInterval | read-write | current | Specifies the time interval, in seconds, at which keepalive packets are sent. (This object is available for a gre tunnel only.) |
| 1.3.6.1.4.1.6296.101.11.8.2.14 | ScalarsleTunneIflControlKeepaliveRetry | read-write | current | Specifies the number times that the device will continue to send keepalive packets without response before bringing the tunnel interface protocol down. (This o… |
| 1.3.6.1.4.1.6296.101.11.8.2.15 | ScalarsleTunnelIfControlPathMtuDiscovery | read-write | current | Path mtu discovery on tunnel. |
| 1.3.6.1.4.1.6296.101.11.8.2.16 | ScalarsleTunnelIfControlVRFName | read-write | current | VPN Routing/Forwarding instance name. |
| 1.3.6.1.4.1.6296.101.11.8.2.17 | ScalarsleTunnelIfControlLocalAddress6 | read-write | current | The address of the local endpoint of the tunnel for IPv6 |
| 1.3.6.1.4.1.6296.101.11.8.2.18 | ScalarsleTunnelIfControlRemoteAddress6 | read-write | current | The address of the remote endpoint of the tunnel for IPv6 |
| 1.3.6.1.4.1.6296.101.11.8.2.19 | ScalarsleTunnelIfControlChecksum | read-write | current | A checksum feature for the tunnel. |
| 1.3.6.1.4.1.6296.101.11.8.2.20 | ScalarsleTunnelIfControlDmac | read-write | current | A destination MAC address for tunneled packets. (IP-in-IP tunneling on Broadcom.) |
| 1.3.6.1.4.1.6296.101.11.8.2.21 | ScalarsleTunnelIfControlTos | read-write | current | A value of Type of Service (TOS) in the tunnel IPv4 encapsulation header. |
| 1.3.6.1.4.1.6296.101.11.8.3 | NodesleTunnelIfNotification | |||
| 1.3.6.1.4.1.6296.101.11.8.3.1 | NotificationsleTunnelIfCreated | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.8.3.2 | NotificationsleTunnelIfDeleted | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.8.3.3 | NotificationsleTunnelIfLocalAddressChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.8.3.4 | NotificationsleTunnelIfRemoteAddressChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.8.3.5 | NotificationsleTunnelIfModeChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.8.3.6 | NotificationsleTunnelIfTTLChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.8.3.7 | NotificationsleTunnelIfDscpChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.8.3.8 | NotificationsleTunnelIfKeepaliveChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.8.3.9 | NotificationsleTunnelIfPathMtuDiscoveryChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.8.3.10 | NotificationsleTunnelIfVRFNameSet | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.8.3.11 | NotificationsleTunnelIfVRFNameUnset | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.8.3.12 | NotificationsleTunnelIfLocalAddress6Changed | current | setTunnelLocalAddr6 | |
| 1.3.6.1.4.1.6296.101.11.8.3.13 | NotificationsleTunnelIfRemoteAddress6Changed | current | setTunnelRemoteAddr6 | |
| 1.3.6.1.4.1.6296.101.11.8.4 | TablesleTunnelAddressTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.8.4.1 | RowsleTunnelAddressEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.8.4.1.1 | ColumnsleTunnelAddressValue | read-only | current | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.6296.101.11.8.4.1.2 | ColumnsleTunnelAddressMask | read-only | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.6296.101.11.8.4.1.3 | ColumnsleTunnelIpAddrBcast | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.11.8.4.1.4 | ColumnsleTunnelAddressFlag | read-only | current | dynamic: ~ permanent primary : ~ secondary anycast: this bit is available for ipv6 only. The others are available for ipv4 only. |
| 1.3.6.1.4.1.6296.101.11.8.4.1.5 | ColumnsleTunnelAddressScope | read-only | current | default : global In linux, 200 - site 0 - global 1..252 - scopeNUM 253 - link 254 - host 255 - nowhere |
| 1.3.6.1.4.1.6296.101.11.8.4.1.6 | ColumnsleTunnelAddressUnnumIfIndex | read-only | current | The unnumbered-source interface index (Before ip unnumbered feature is set, a tunnel interface must be created.) (ex. br100 -> 100, br200 -> 200) |
| 1.3.6.1.4.1.6296.101.11.8.4.1.7 | ColumnsleTunnelAddressUnnumIpIndex | read-only | current | The Ip index for Interface Unnumbered feature enhanced. If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip add… |
| 1.3.6.1.4.1.6296.101.11.8.5 | NodesleTunnelAddressControl | |||
| 1.3.6.1.4.1.6296.101.11.8.5.1 | ScalarsleTunnelAddressControlRequest | read-write | current | The request of a user command. |
| 1.3.6.1.4.1.6296.101.11.8.5.2 | ScalarsleTunnelAddressControlStatus | read-only | current | The status of a user command. |
| 1.3.6.1.4.1.6296.101.11.8.5.3 | ScalarsleTunnelAddressControlTimer | read-write | current | The maximum wait time for the manager for a long running user command. |
| 1.3.6.1.4.1.6296.101.11.8.5.4 | ScalarsleTunnelAddressControlTimeStamp | read-only | current | The result of the last user command. |
| 1.3.6.1.4.1.6296.101.11.8.5.5 | ScalarsleTunnelAddressControlReqResult | read-only | current | The time stamp of the last command (end of command). |
| 1.3.6.1.4.1.6296.101.11.8.5.6 | ScalarsleTunnelAddressControlTunnelIfIndex | read-write | current | Tunnel interface index |
| 1.3.6.1.4.1.6296.101.11.8.5.7 | ScalarsleTunnelAddressControlValue | read-write | current | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.6296.101.11.8.5.8 | ScalarsleTunnelAddressControlMask | read-write | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.6296.101.11.8.5.9 | ScalarsleTunnelAddressControlFlag | read-write | current | default : primary |
| 1.3.6.1.4.1.6296.101.11.8.5.10 | ScalarsleTunnelAddressControlScope | read-write | current | default : global not applicable : nowhere |
| 1.3.6.1.4.1.6296.101.11.8.5.11 | ScalarsleTunnelAddressControlUnnumIfIndex | read-write | current | The unnumbered-source interface index (Before ip unnumbered feature is set, a tunnel interface must be created.) (ex. br100 -> 100, br200 -> 200) |
| 1.3.6.1.4.1.6296.101.11.8.5.12 | ScalarsleTunnelAddressControlUnnumIpIndex | read-write | current | The Ip index for Interface Unnumbered feature enhanced. If Interface Unnumbered enhanced feature is enabled on a point-to-point interface. It will get a ip add… |
| 1.3.6.1.4.1.6296.101.11.8.6 | NodesleTunnelAddressNotification | |||
| 1.3.6.1.4.1.6296.101.11.8.6.1 | NotificationsleTunnelAddressCreated | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.8.6.2 | NotificationsleTunnelAddressDeleted | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.8.6.3 | NotificationsleTunnelAddressUnnumChanged | current | setIfUnnumbered | |
| 1.3.6.1.4.1.6296.101.11.8.6.4 | NotificationsleTunnelAddressUnnumDeleted | current | delIfUnnumbered | |
| 1.3.6.1.4.1.6296.101.11.9 | NodesleIpVRF | |||
| 1.3.6.1.4.1.6296.101.11.9.1 | TablesleIpVRFTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.9.1.1 | RowsleIpVRFEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.9.1.1.1 | ColumnsleIpVRFIndex | read-only | current | VRF index. |
| 1.3.6.1.4.1.6296.101.11.9.1.1.2 | ColumnsleIpVRFName | read-only | current | VRF name. |
| 1.3.6.1.4.1.6296.101.11.9.1.1.3 | ColumnsleIpVRFDesignatedPorts | read-only | current | The port map of VRF designated-port. |
| 1.3.6.1.4.1.6296.101.11.9.1.1.4 | ColumnsleIpVRFRouterId | read-only | current | Router-Identifier |
| 1.3.6.1.4.1.6296.101.11.9.1.1.5 | ColumnsleIpVRFDescription | read-only | current | The description of VRF. |
| 1.3.6.1.4.1.6296.101.11.9.2 | NodesleIpVRFControl | |||
| 1.3.6.1.4.1.6296.101.11.9.2.1 | ScalarsleIpVRFControlRequest | read-write | current | The request of a user command. |
| 1.3.6.1.4.1.6296.101.11.9.2.2 | ScalarsleIpVRFControlStatus | read-only | current | The status of a user command. |
| 1.3.6.1.4.1.6296.101.11.9.2.3 | ScalarsleIpVRFControlTimer | read-write | current | The maximum wait time for the manager for a long running user command. |
| 1.3.6.1.4.1.6296.101.11.9.2.4 | ScalarsleIpVRFControlTimeStamp | read-only | current | The result of the last user command. |
| 1.3.6.1.4.1.6296.101.11.9.2.5 | ScalarsleIpVRFControlReqResult | read-only | current | The time stamp of the last command (end of command). |
| 1.3.6.1.4.1.6296.101.11.9.2.6 | ScalarsleIpVRFControlName | read-write | current | VRF name |
| 1.3.6.1.4.1.6296.101.11.9.2.7 | ScalarsleIpVRFControlDesignatedPorts | read-write | current | The port map of VRF designated-port. |
| 1.3.6.1.4.1.6296.101.11.9.2.8 | ScalarsleIpVRFControlRouterId | read-write | current | Router-Identifier |
| 1.3.6.1.4.1.6296.101.11.9.2.9 | ScalarsleIpVRFControlDescription | read-write | current | The description of VRF. |
| 1.3.6.1.4.1.6296.101.11.9.3 | NodesleIpVRFNotification | |||
| 1.3.6.1.4.1.6296.101.11.9.3.1 | NotificationsleIpVRFCreated | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.9.3.2 | NotificationsleIpVRFDeleted | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.9.3.3 | NotificationsleIpVRFDesignatedPortsSet | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.9.3.4 | NotificationsleIpVRFDesignatedPortsUnset | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.9.3.5 | NotificationsleIpVRFRouterIdChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.9.3.6 | NotificationsleIpVRFDescriptionChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.9.4 | TablesleIpVRFSelectionSourceTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.9.4.1 | RowsleIpVRFSelectionSourceEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.9.4.1.1 | ColumnsleIpVRFSelectionSrcIndex | read-only | current | VRF selection source index. |
| 1.3.6.1.4.1.6296.101.11.9.4.1.2 | ColumnsleIpVRFSelectionSrcAddr | read-only | current | VRF selection by source IP address. |
| 1.3.6.1.4.1.6296.101.11.9.4.1.3 | ColumnsleIpVRFSelectionSrcMask | read-only | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.6296.101.11.9.4.1.4 | ColumnsleIpVRFSelectionSrcVRFName | read-only | current | VPN Routing/Forwarding instance name. |
| 1.3.6.1.4.1.6296.101.11.9.5 | NodesleIpVRFSelectionSourceControl | |||
| 1.3.6.1.4.1.6296.101.11.9.5.1 | ScalarsleIpVRFSelectionSrcControlRequest | read-write | current | The request of a user command. |
| 1.3.6.1.4.1.6296.101.11.9.5.2 | ScalarsleIpVRFSelectionSrcControlStatus | read-only | current | The status of a user command. |
| 1.3.6.1.4.1.6296.101.11.9.5.3 | ScalarsleIpVRFSelectionSrcControlTimer | read-write | current | The maximum wait time for the manager for a long running user command. |
| 1.3.6.1.4.1.6296.101.11.9.5.4 | ScalarsleIpVRFSelectionSrcControlTimeStamp | read-only | current | The result of the last user command. |
| 1.3.6.1.4.1.6296.101.11.9.5.5 | ScalarsleIpVRFSelectionSrcControlReqResult | read-only | current | The time stamp of the last command (end of command). |
| 1.3.6.1.4.1.6296.101.11.9.5.6 | ScalarsleIpVRFSelectionSrcControlAddr | read-write | current | VRF selection by source IP address. |
| 1.3.6.1.4.1.6296.101.11.9.5.7 | ScalarsleIpVRFSelectionSrcControlMask | read-write | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.6296.101.11.9.5.8 | ScalarsleIpVRFSelectionSrcControlVRFName | read-write | current | VPN Routing/Forwarding instance name. |
| 1.3.6.1.4.1.6296.101.11.9.6 | NodesleIpVRFSelectionSourceNotification | |||
| 1.3.6.1.4.1.6296.101.11.9.6.1 | NotificationsleIpVRFSelectionSrcSet | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.9.6.2 | NotificationsleIpVRFSelectionSrcUnset | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.10 | NodesleBFD | |||
| 1.3.6.1.4.1.6296.101.11.10.1 | NodesleBFDBase | |||
| 1.3.6.1.4.1.6296.101.11.10.1.1 | NodesleBFDBaseInfo | |||
| 1.3.6.1.4.1.6296.101.11.10.1.1.1 | ScalarsleBFDEnable | read-only | current | BFD fast-detect is enabled or disabled. |
| 1.3.6.1.4.1.6296.101.11.10.1.1.2 | ScalarsleBFDEchoEnable | read-only | current | BFD Echo function is enabled or disabled. |
| 1.3.6.1.4.1.6296.101.11.10.1.1.3 | ScalarsleBFDSlowTimer | read-only | current | BFD Slow Timer in unit of milliseconds default: 1000(ms) |
| 1.3.6.1.4.1.6296.101.11.10.1.2 | NodesleBFDBaseControl | |||
| 1.3.6.1.4.1.6296.101.11.10.1.2.1 | ScalarsleBFDControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.101.11.10.1.2.2 | ScalarsleBFDControlStatus | read-only | current | The status of user command. |
| 1.3.6.1.4.1.6296.101.11.10.1.2.3 | ScalarsleBFDControlTimer | read-write | current | The maximum time for the manager for a long running user command. |
| 1.3.6.1.4.1.6296.101.11.10.1.2.4 | ScalarsleBFDControlTimeStamp | read-only | current | The time stamp of the last command(end of command). |
| 1.3.6.1.4.1.6296.101.11.10.1.2.5 | ScalarsleBFDControlReqResult | read-only | current | The result of the last user command. |
| 1.3.6.1.4.1.6296.101.11.10.1.2.6 | ScalarsleBFDControlEnable | read-write | current | BFD fast-detect is enabled or disabled. |
| 1.3.6.1.4.1.6296.101.11.10.1.2.7 | ScalarsleBFDControlEchoEnable | read-write | current | BFD Echo function is enabled or disabled. |
| 1.3.6.1.4.1.6296.101.11.10.1.2.8 | ScalarsleBFDControlSlowTimer | read-write | current | BFD Slow Timer in unit of milliseconds default: 1000(ms) |
| 1.3.6.1.4.1.6296.101.11.10.1.3 | NodesleBFDBaseNotification | |||
| 1.3.6.1.4.1.6296.101.11.10.1.3.1 | NotificationsleBFDBaseProfileChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.10.2 | NodesleBFDInterface | |||
| 1.3.6.1.4.1.6296.101.11.10.2.1 | TablesleBFDInterfaceTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.2.1.1 | RowsleBFDInterfaceEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.2.1.1.1 | ColumnsleBFDIfRxInterval | read-only | current | Required Min Rx Interval of BFD control packet in this interface. default: 50(ms) |
| 1.3.6.1.4.1.6296.101.11.10.2.1.1.2 | ColumnsleBFDIfTxInterval | read-only | current | Required Min Tx Interval of BFD control packet in this interface. default: 50(ms) |
| 1.3.6.1.4.1.6296.101.11.10.2.1.1.3 | ColumnsleBFDIfDetectMulti | read-only | current | Detect Multi value of BFD control packet in this interface. default: 3 |
| 1.3.6.1.4.1.6296.101.11.10.2.1.1.4 | ColumnsleBFDIfRxIntervalIPv6 | read-only | current | Required Min Rx Interval of IPv6 BFD control packet in this interface. default: 50(ms) |
| 1.3.6.1.4.1.6296.101.11.10.2.1.1.5 | ColumnsleBFDIfTxIntervalIJPv6 | read-only | current | Required Min Tx Interval of IPv6 BFD control packet in this interface. default: 50(ms) |
| 1.3.6.1.4.1.6296.101.11.10.2.1.1.6 | ColumnsleBFDIfDetectMultiIPv6 | read-only | current | Detect Multi value of IPv6 BFD control packet in this interface. default: 3 |
| 1.3.6.1.4.1.6296.101.11.10.2.2 | NodesleBFDInterfaceControl | |||
| 1.3.6.1.4.1.6296.101.11.10.2.2.1 | ScalarsleBFDIfControlRequest | read-write | current | The request of a user command |
| 1.3.6.1.4.1.6296.101.11.10.2.2.2 | ScalarsleBFDIfControlStatus | read-only | current | The status of user command. |
| 1.3.6.1.4.1.6296.101.11.10.2.2.3 | ScalarsleBFDIfControlTimer | read-write | current | The maximum time for the manager for a long running user command. |
| 1.3.6.1.4.1.6296.101.11.10.2.2.4 | ScalarsleBFDIfControlTimeStamp | read-only | current | The time stamp of the last command(end of command). |
| 1.3.6.1.4.1.6296.101.11.10.2.2.5 | ScalarsleBFDIfControlReqResult | read-only | current | The result of the last user command. |
| 1.3.6.1.4.1.6296.101.11.10.2.2.6 | ScalarsleBFDIfControlNetIfIndex | read-write | current | BFD Interface Index. |
| 1.3.6.1.4.1.6296.101.11.10.2.2.7 | ScalarsleBFDIfControlRxInterval | read-write | current | Required Min Rx Interval of BFD control packet in this interface. default: 50(ms) |
| 1.3.6.1.4.1.6296.101.11.10.2.2.8 | ScalarsleBFDIfControlTxInterval | read-write | current | Required Min Tx Interval of BFD control packet in this interface. default: 50(ms) |
| 1.3.6.1.4.1.6296.101.11.10.2.2.9 | ScalarsleBFDIfControlDetectMulti | read-write | current | Detect Multi value of BFD control packet in this interface. default: 3 |
| 1.3.6.1.4.1.6296.101.11.10.2.2.10 | ScalarsleBFDIfControlRxIntervalIPv6 | read-write | current | Required Min Rx Interval of IPv6 BFD control packet in this interface. default: 50(ms) |
| 1.3.6.1.4.1.6296.101.11.10.2.2.11 | ScalarsleBFDIfControlTxIntervalIPv6 | read-write | current | Required Min Tx Interval of IPv6 BFD control packet in this interface. default: 50(ms) |
| 1.3.6.1.4.1.6296.101.11.10.2.2.12 | ScalarsleBFDIfControlDetectMultiIPv6 | read-write | current | Detect Multi value of IPv6 BFD control packet in this interface. default: 3 |
| 1.3.6.1.4.1.6296.101.11.10.2.3 | NodesleBFDInterfaceNotification | |||
| 1.3.6.1.4.1.6296.101.11.10.2.3.1 | NotificationsleBFDIfProfileChanged | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.10.3 | NodesleBFDSession | |||
| 1.3.6.1.4.1.6296.101.11.10.3.1 | NodesleBFDSessionInfo | |||
| 1.3.6.1.4.1.6296.101.11.10.3.1.1 | TablesleBFDSessionInfoTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.3.1.1.1 | RowsleBFDSessionInfoEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.1 | ColumnsleBFDSessionNeighAddrType | read-only | current | Type of Neighbor Address referred to this session |
| 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.2 | ColumnsleBFDSessionNeighAddrValue | read-only | current | Value of Neighbor Address referred to this session. |
| 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.3 | ColumnsleBFDSessionRegProtocols | read-only | current | Value of Neighbor Address referred to this session. |
| 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.4 | ColumnsleBFDSessionLocalDiscr | read-only | current | Discriminator of this session. |
| 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.5 | ColumnsleBFDSessionRemoteDiscr | read-only | current | Discriminator of remote session neighboring this session. |
| 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.6 | ColumnsleBFDSessionDetecMultiplier | read-only | current | Detect Multiplier value which this session used. default: 3 |
| 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.7 | ColumnsleBFDSessionStatus | read-only | current | Status of this session. AdminDown(0) is same as disabled(4). |
| 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.8 | ColumnsleBFDSessionEchoUsage | read-only | current | Determine whether this session use or not echo function. |
| 1.3.6.1.4.1.6296.101.11.10.3.1.1.1.9 | ColumnsleBFDSessionUptime | read-only | current | The time since this session��s status changed into ��Up��. |
| 1.3.6.1.4.1.6296.101.11.10.3.2 | NodesleBFDSessionStats | |||
| 1.3.6.1.4.1.6296.101.11.10.3.2.1 | TablesleBFDSessionStatsTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1 | RowsleBFDSessionStatsEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.1 | ColumnsleBFDSessionStatsHolddownTime | read-only | current | Type of Neighbor Address referred to this session. |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.2 | ColumnsleBFDSessionStatsHolddownExpires | read-only | current | The time remaining before this entry change into down status without receiving hello in unit of milliseconds. |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.3 | ColumnsleBFDSessionStatsHolddownHitCount | read-only | current | Hit Count whose this session status chang into down. |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.4 | ColumnsleBFDSessionStatsHelloTime | read-only | current | The time is when it expects next hello, after receiving that in unit of milliseconds. |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.5 | ColumnsleBFDSessionStatsHelloHitCount | read-only | current | Hit Count whose this session received. |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.6 | ColumnsleBFDSessionStatsRxCount | read-only | current | Hit Count whose this session received control packet. |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.7 | ColumnsleBFDSessionStatsRxAvgInterval | read-only | current | Average interval whose this session received control packet. |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.8 | ColumnsleBFDSessionStatsRxMinInterval | read-only | current | Minimum interval whose this session received control packet. |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.9 | ColumnsleBFDSessionStatsRxMaxInterval | read-only | current | Maximum interval whose this session received control packet. |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.10 | ColumnsleBFDSessionStatsTxCount | read-only | current | Hit Count whose this session send control packet. |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.11 | ColumnsleBFDSessionStatsTxAvgInterval | read-only | current | Average interval whose this session sent control packet. |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.12 | ColumnsleBFDSessionStatsTxMinInterval | read-only | current | Minimum interval whose this session sent control packet. |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.13 | ColumnsleBFDSessionStatsTxMaxInterval | read-only | current | Maximum interval whose this session received control packet. |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.14 | ColumnsleBFDSessionStatsEchoRxCount | read-only | current | Hit Count whose this session received echo packet |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.15 | ColumnsleBFDSessionStatsEchoRxAvgInterval | read-only | current | Average interval whose this session received echo packet |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.16 | ColumnsleBFDSessionStatsEchoRxMinInterval | read-only | current | Minimum interval whose this session received echo packet |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.17 | ColumnsleBFDSessionStatsEchoRxMaxInterval | read-only | current | Maximum interval whose this session received echo packet |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.18 | ColumnsleBFDSessionStatsEchoTxCount | read-only | current | Hit Count whose this session send echo packet |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.19 | ColumnsleBFDSessionStatsEchoTxAvgInterval | read-only | current | Average interval whose this session sent echo packet. |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.20 | ColumnsleBFDSessionStatsEchoTxMinInterva | read-only | current | Minimum interval whose this session sent echo packet. |
| 1.3.6.1.4.1.6296.101.11.10.3.2.1.1.21 | ColumnsleBFDSessionStatsEchoTxMaxInterval | read-only | current | Maximum interval whose this session received echo packet. |
| 1.3.6.1.4.1.6296.101.11.10.3.3 | NodesleBFDSessionLocal | |||
| 1.3.6.1.4.1.6296.101.11.10.3.3.1 | TablesleBFDSessionLocalTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.3.3.1.1 | RowsleBFDSessionLocalEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.1 | ColumnsleBFDSessionLocalDiag | read-only | current | Value of State field of this session��s control packet. |
| 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.2 | ColumnsleBFDSessionLocalState | read-only | current | Value of Diag field of this session��s control packet |
| 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.3 | ColumnsleBFDSessionLocalFlags | read-only | current | Value of Flags field of this session��s control packet. |
| 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.4 | ColumnsleBFDSessionLocalMultiplier | read-only | current | Value of MinTxInterval field of this session��s control packet in unit of microseconds. |
| 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.5 | ColumnsleBFDSessionLocalMinTxInterval | read-only | current | Value of MinTxInterval field of this session��s control packet in unit of microseconds. |
| 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.6 | ColumnsleBFDSessionLocalMinRxInterval | read-only | current | Value of MinRxInterval field of this session��s control packet in unit of microseconds. |
| 1.3.6.1.4.1.6296.101.11.10.3.3.1.1.7 | ColumnsleBFDSessionLocalMinEchoInterval | read-only | current | Value of MinEchoInterval field of this session��s control packet in unit of microseconds. |
| 1.3.6.1.4.1.6296.101.11.10.3.4 | NodesleBFDSessionRemote | |||
| 1.3.6.1.4.1.6296.101.11.10.3.4.1 | TablesleBFDSessionRemoteTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.3.4.1.1 | RowsleBFDSessionRemoteEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.1 | ColumnsleBFDSessionRemoteDiag | read-only | current | Value of State field of remote session��s control packet. |
| 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.2 | ColumnsleBFDSessionRemoteState | read-only | current | Value of Diag field of remote session��s control packet |
| 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.3 | ColumnsleBFDSessionremoteFlags | read-only | current | Value of Flags field of remote session��s control packet. |
| 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.4 | ColumnsleBFDSessionRemoteMultiplier | read-only | current | Value of MinTxInterval field of this session��s control packet in unit of microseconds. |
| 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.5 | ColumnsleBFDSessionRemoteMinTxInterval | read-only | current | Value of MinTxInterval field of remote session��s control packet in unit of microseconds. |
| 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.6 | ColumnsleBFDSessionRemoteMinRxInterval | read-only | current | Value of MinRxInterval field of remote session��s control packet in unit of microseconds. |
| 1.3.6.1.4.1.6296.101.11.10.3.4.1.1.7 | ColumnsleBFDSessionRemoteMinEchoInterval | read-only | current | Value of MinEchoInterval field of remote session��s control packet in unit of microseconds. |
| 1.3.6.1.4.1.6296.101.11.10.4 | NodesleBFDStaticGw | |||
| 1.3.6.1.4.1.6296.101.11.10.4.1 | TablesleBFDStaticGwTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.4.1.1 | RowsleBFDStaticGwEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.4.1.1.1 | ColumnsleBFDStaticGwAddrType | read-write | current | The BFD static Gateway address type. Only ipv4(1). |
| 1.3.6.1.4.1.6296.101.11.10.4.1.1.2 | ColumnsleBFDStaticGwAddr | read-write | current | The BFD static Gateway address. 4bytes |
| 1.3.6.1.4.1.6296.101.11.10.4.2 | NodesleBFDStaticGwControl | |||
| 1.3.6.1.4.1.6296.101.11.10.4.2.1 | ScalarsleBFDStaticGwControlRequest | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.4.2.2 | ScalarsleBFDStaticGwControlStatus | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.4.2.3 | ScalarsleBFDStaticGwControlTimer | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.4.2.4 | ScalarsleBFDStaticGwControlTimeStamp | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.4.2.5 | ScalarsleBFDStaticGwControlReqResult | read-only | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.4.2.6 | ScalarsleBFDStaticGwControlNetIfIndex | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.4.2.7 | ScalarsleBFDStaticGwControlGwAddrType | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.4.2.8 | ScalarsleBFDStaticGwControlGwAddr | read-write | current | Description. |
| 1.3.6.1.4.1.6296.101.11.10.4.3 | NodesleBFDStaticGwNotification | |||
| 1.3.6.1.4.1.6296.101.11.10.4.3.1 | NotificationsleBFDStaticGwAdded | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.10.4.3.2 | NotificationsleBFDStaticGwDeleted | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.14 | GroupsleNetworkGroup | current | Description. | |
| 1.3.6.1.4.1.6296.101.11.15 | GroupsleNetworkNotificationGroup | current | Description. |